Log in

Relevant bibliographies by topics / Research Subject Categories – TECHNOLOGY – Tribology, Manufacturing, Materials science

Contents

Journal articles
Dissertations / Theses
Conference papers

Academic literature on the topic 'Research Subject Categories – TECHNOLOGY – Tribology, Manufacturing, Materials science'

Author: Grafiati

Published: 6 September 2023

Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Research Subject Categories – TECHNOLOGY – Tribology, Manufacturing, Materials science.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Research Subject Categories – TECHNOLOGY – Tribology, Manufacturing, Materials science"

1

Rodriguez-Salvador, Marisela, Baruc Emet Perez-Benitez, and Karen Marcela Padilla-Aguirre. "Discovering the Latest Scientific Pathways on Tissue Spheroids: Opportunities to Innovate." International Journal of Bioprinting 7, no. 1 (2021): 331. http://dx.doi.org/10.18063/ijb.v7i1.331.

Full text

Abstract:

Tissue spheroids consist of a three-dimensional model of cells which is capable of imitating the complicated composition of healthy and unhealthy human tissue. Due to their unique properties, they can bring innovative solutions to tissue engineering and regenerative medicine, where they can be used as building blocks for the formation of organ and tissue models used in drug experimentation. Considering the rapid transformation of the health industry, it is crucial to assess the research dynamics of this field to support the development of innovative applications. In this research, a scientomet

APA, Harvard, Vancouver, ISO, and other styles

2

Nazapour Samsami, Parvaneh, Farank Omidian, and Karim Savari. "Designing a model to evaluate the effectiveness of educational and educational leadership models among principals." Journal of Adolescent and Youth Psychological Studies 3, no. 3 (2022): 348–59. http://dx.doi.org/10.61838/kman.jayps.3.3.26.

Full text

Abstract:

Background Aims: In order to improve the management and facilitate the supervision and guidance of educational and educational activities, there should be competent people as educational leaders with the goals of improving the quality of educational and educational affairs, the professional skills of teachers, increasing the academic level of learners and preventing academic failure by providing services. Consultants and guidance should be used.. Therefore, the aim of the present study was to design a model for evaluating the effectiveness of educational leadership patterns among principals of

APA, Harvard, Vancouver, ISO, and other styles

Dissertations / Theses on the topic "Research Subject Categories – TECHNOLOGY – Tribology, Manufacturing, Materials science"

1

Edachery, Vimal. "Influence of Surface Topography and Roughness on Lubrication, Friction and Scuffing in High Hardness Steels." Thesis, 2021. https://etd.iisc.ac.in/handle/2005/5499.

Full text

Abstract:

In tribology engineering, friction control is a significant challenge. The interacting surfaces of mechanical components are typically designed for best efficiency during tribological operations and are primarily achieved through adequate lubrication. In these applications, breakage of the lubricant films between these contacting components can cause surface damage. In extreme-sliding interactions, this can lead to seizure and scuffing. Scuffing is a severe form of wear observed in lubricated sliding interactions. Hence, lubrication effectiveness becomes an important tribological factor that c

APA, Harvard, Vancouver, ISO, and other styles

2

Kamble, Smita. "Study of gas-fine flow in a packed bed with an application to the ironmaking blast furnace." Thesis, 2022. https://etd.iisc.ac.in/handle/2005/6041.

Full text

Abstract:

The iron and steelmaking industry uses coal as the primary reducing agent. The carbon that is the major component of coal is finally released into the environment as carbon dioxide. One of the effective ways to reduce the coke consumption and thus the reduction in greenhouse gases is to introduce coal or other carbonaceous materials through the tuyere. However, this can be done only up to some extent as injection of these materials reduces the bed permeability which in turn affects the operation and productivity of the blast furnace (BF). Previous studies have shown that at a higher pulverised

APA, Harvard, Vancouver, ISO, and other styles

3

Sabban, Rushikesh. "Heat Treatment and Surface Engineering of Selective Laser Melted Ti-6Al-4V for Improved Performance in Biomedical Implants." Thesis, 2018. https://etd.iisc.ac.in/handle/2005/5480.

Full text

Abstract:

Metals and alloys are extensively used to prepare a wide variety of biomedical implants. The commonly employed materials are stainless steel (SS), cp-Ti, Ti-6Al-4V, etc., because of their biocompatibility and corrosion resistance. The implants that are currently used are manufactured using conventional metal processing techniques such as deep drawing, casting, rolling, forging, grinding, moulding or hydro forming. As a consequence, all the implants produced have defined geometries with little scope for variation. However, patient anatomy varies significantly based on age, gender, physique, etc

APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Research Subject Categories – TECHNOLOGY – Tribology, Manufacturing, Materials science"

1

Groche, Peter, and Norman Möller. "Tribological Investigation of Deep-Drawing Processes Using Servo Presses." In ASME 2012 International Manufacturing Science and Engineering Conference collocated with the 40th North American Manufacturing Research Conference and in participation with the International Conference on Tribology Materials and Processing. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/msec2012-7292.

Full text

Abstract:

Deep-drawing is one of the most important processes for the economic production of sheet metal parts, especially for high quantities. The forming forces during the process are a limiting factor for the producible shapes. A particular importance is associated with the tribology, because the percentage of friction forces on the total forces is relatively high. The friction between sheet metal and tool is influenced by several factors, such as surface characteristics of the work piece and the tool, lubrication conditions and process parameters, like the contact pressure and the sliding speed. Con

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!