Relevant bibliographies by topics / Residual influence

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Residual influence'

Author: Grafiati
Published: 4 June 2021
Last updated: 1 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Residual influence.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Residual influence"

1

Llanos, David, Joan Colomer, Joaquim Meléndez, and Marcel Staroswiecki. "INFLUENCE OF NETWORK DELAYS IN RESIDUAL COMPUTATION." IFAC Proceedings Volumes 38, no. 1 (2005): 221–26. http://dx.doi.org/10.3182/20050703-6-cz-1902.01839.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Tong, Pin. "Influence of fastener holes on residual strength." International Journal of Fracture 67, no. 4 (June 1994): 315–24. http://dx.doi.org/10.1007/bf00032498.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

R., Sanjay Krishna Vihari, Kartheek Gamidi, and Vamsi Krishna P. "Parametric influence on residual stresses in VAT." Materials Today: Proceedings 46 (2021): 8056–60. http://dx.doi.org/10.1016/j.matpr.2021.03.031.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Kasbekar, Anand, Guleed Adan, Alaina Beacall, Ahmed Youssef, Catherine Gilkes, and Tristram Lesser. "Growth Patterns of Residual Tumor in Preoperatively Growing Vestibular Schwannomas." Journal of Neurological Surgery Part B: Skull Base 79, no. 04 (November 8, 2017): 319–24. http://dx.doi.org/10.1055/s-0037-1607421.

Full text
Abstract:
Objectives To analyze growth of residual vestibular schwannoma (VS) following incomplete tumor resection and determine the influence of residual location and size. Design Retrospective case note and scan review. Setting Tertiary skull base unit. Participants Patients with residual tumor following primary surgery for medium and large unilateral growing vestibular schwanomas between 2006 and 2009. Main Outcome Measures Location of residual VS and post-operative growth, comparing those with more (>5%) or less than 5% of tumor residual (<5%). Results Fifty-two patients had visible residual tumor left behind at surgery. Twenty had < 5% and 32 had > 5% residual. The residual growth rates were 38% overall, 20% in < 5%, and 50% in > 5% residuals. There was no significant difference in growth rates at different residual locations. Median follow-up was 6.4 years. Conclusions There is a greater risk of regrowth of residuals > 5%. All positions of residual tumor can regrow, and the preoperative tumor size plays a role in this. Further data is needed to confirm if residual tumor in the fundus is less likely to grow.
APA, Harvard, Vancouver, ISO, and other styles
5

Dolejs, P. "Influence of Algae and Their Exudates on Removal of Humic Substances and Optimal Dose of Coagulant." Water Science and Technology 27, no. 11 (June 1, 1993): 123–32. http://dx.doi.org/10.2166/wst.1993.0271.

Full text
Abstract:
There is still not enough information about the influence of several important variables, which occur in natural systems, on the coagulation of humic substances. One of these rarely studied variables is type and concentration of algal exudates. Thi s paper presents the results of research of the influence of alga Scenedesmus quadricauda and its exudates on the results of coagulation experiments with model humic water. The arrangement of experiments should simulate one possible way how algae might influence natural water systems and water treatment. The results demonstrate that both the residual concentration of humic substances and residual aluminium are influenced during the time which elapses after the addition of the washed algae to the model humic water. But the influence of algae on residual colour is partly different from their influence on residual aluminium. Early after the algae addition to the model humic water, they influence the system predominantly with their surfaces, because the concentration of their exudates is low. This increases the residual concentration of aluminium. On the other hand, longer “algal residence time” in model humic water decreases the residual aluminium concentrations. Systems with algae are sensitive to overdosing with respect to both residual humic substances and residual aluminium.
APA, Harvard, Vancouver, ISO, and other styles
6

Olofsson, Johanna. "Time-Dependent Climate Impact of Utilizing Residual Biomass for Biofuels—The Combined Influence of Modelling Choices and Climate Impact Metrics." Energies 14, no. 14 (July 13, 2021): 4219. http://dx.doi.org/10.3390/en14144219.

Full text
Abstract:
Understanding the influence of method choices on results in life-cycle assessments is essential to draw informed conclusions. As the climate impact of bioenergy remains a debated topic, the focus of this study is how the chosen temporal framing influences a comparison of the climate impact of utilizing residual biomass for biofuel production to that of leaving the biomass to decay. In order to compare the biofuel scenario to its corresponding reference scenario where biomass is left to decay, a variety of analytical approaches were used: using time-aggregated and time-dependent life-cycle inventories and climate-impact assessment methods, assuming biogenic carbon to be climate neutral or not, using metrics for cumulative or instantaneous climate impact, and with different time horizons. Two cases of residual biofuel feedstocks were assessed: logging residues from Norway spruce forest, and straw from wheat cultivation. Consideration of the studied method choices appears to be especially relevant for forest residual biomass, as illustrated by the ranges of parity times for logging residues (25 to 95 years), and the results which vary with the chosen climate-impact metric, time-horizon, and approach for including biogenic carbon. Illustrating the time-dependence of results can, in general, provide a better understanding of the climate impact of utilizing residual biomass for biofuels.
APA, Harvard, Vancouver, ISO, and other styles
7

Sackmann, D., J. Heinzel, and B. Karpuschewski. "Influence of the Material State of Ground, Case-Hardened Steels on the Barkhausen Noise Depending on the Surface Integrity*." HTM Journal of Heat Treatment and Materials 76, no. 1 (February 1, 2021): 5–18. http://dx.doi.org/10.1515/htm-2020-0001.

Full text
Abstract:
Abstract The manufacturing process of grinding generally leads to a thermo-mechanical influence on the surface integrity. In addition to the intended development of residual compressive stresses due to the finishing process, disturbances in the grinding process can lead to negative effects such as tensile residual stresses, tempering and even rehardening zones and significantly reduce the component lifetime. In industrial applications, the analysis of Barkhausen noise is becoming increasingly important for the detection of this unwanted thermo-mechanically influenced surface integrity. The non-destructive method reacts sensitively to changes in, for example, the residual stress state as well as the hardness. In addition, other material-, process- and metrology-related influences are described in literature. The investigations presented in this paper deal with the influence of different material states (case-hardening depth, surface carbon content and alloy composition) on the signals of the Barkhausen noise as a function of the surface integrity. It is shown that the signal level is significantly influenced by the material condition and thus individual limit values must be used for evaluation of the surface integrity. ◼
APA, Harvard, Vancouver, ISO, and other styles
8

Charni, Dhia, Svetlana Ishkina, Jérémy Epp, Marius Herrrmann, Christian Schenck, Hans-Werner Zoch, and Bernd Kuhfuss. "Generation of residual stresses in rotary swaging process." MATEC Web of Conferences 190 (2018): 04001. http://dx.doi.org/10.1051/matecconf/201819004001.

Full text
Abstract:
Infeed rotary swaging is an established incremental cold forming production technique for axisymmetric workpieces. Among others, work hardening as well as near net shape forming are advantages of this production technique. Due to the incremental open die forging process, the rotary swaging induces a complex material flow history which is dependent on the process control. This material flow history influences the material modifications such as work hardening as well as residual stresses. In this study, the properties of steel tubes were investigated after rotary swaging using varying parameters by experimental and simulation analysis. In particular, the influence of lubrication with different feeding velocities was analysed. The workpiece quality, the hardness and the residual stresses were characterized in detail. After rotary swaging, an influence of the process parameters on the geometrical and surface quality could be observed. The workpieces showed significant work hardening which was higher at the surface and process dependent, while below 100 μm, this increased hardness was observed over the complete wall thickness independently of the process parameters. The residual stress state was highly fluctuating at the surface and was in tensile for all conditions. The results showed that the process parameters influenced the properties near the surface, while a few hundred micrometers below the surface, the workpiece properties seemed to be driven only by the total deformation.
APA, Harvard, Vancouver, ISO, and other styles
9

Pokorný, P., P. Dlhý, J. Poduška, R. Fajkoš, T. Vojtek, L. Náhlík, M. Grasso, and P. Hutař. "Influence of heat treatment-induced residual stress on residual fatigue life of railway axles." Theoretical and Applied Fracture Mechanics 109 (October 2020): 102732. http://dx.doi.org/10.1016/j.tafmec.2020.102732.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Enright, Michael P., Kwai S. Chan, Jonathan P. Moody, Patrick J. Golden, Ramesh Chandra, and Alan C. Pentz. "Influence of Random Residual Stress on Fretting Fatigue." AIAA Journal 49, no. 5 (May 2011): 881–89. http://dx.doi.org/10.2514/1.45774.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Residual influence"

1

Mahmoudi, Amir Hossein. "Influence of residual stresses on fracture." Thesis, University of Bristol, 2005. http://hdl.handle.net/1983/4026a13c-3d83-49a6-815c-1bdf50e37f0a.

Full text
Abstract:
This thesis presents numerical and experimental research concerned with developing laboratory test specimens containing well-characterised residual stress fields. These specimens were then used to examine how residual stresses influenced fracture conditions. Three different materials were used in this work; an A508 ferritic steel, and two aluminium alloys, 2650 and 2024. Residual stresses were generated using a technique called local compression on both uncracked plates and cracked compact tension, C(T), specimens. Residual stresses introduced by single punching tools on the uncracked specimens were examined theoretically and numerically to benchmark further developments. Also residual stresses were measured using three techniques, deep-hole drilling (DHD), centre-hole drilling (ICHD) and synchrotron diffraction (HEXRD) and excellent agreement between measurement methods was obtained. A parametric study was carried out to determine the features of the residual stress field generated in cracked specimens. The position of single and double pairs of punching tools relative to the crack tip as well as the size of the punches were examined systematically. The numerical analyses revealed that positioning a single punching tool tangentially to the crack tip resulted in the generation of a tensile residual stress field ahead of a crack. Furthermore, double pairs of punching tools were shown to generate either tensile or compressive residual stresses normal to the crack plane depending on the relative position of the tools to the crack tip. The numerical findings were confirmed experimentally through HEXRD measurements and fracture tests. Local compression and prior overloading were applied to C(T) specimens to generate a residual stress field, either independently or in combination. It was found that tensile residual stresses reduced the apparent fracture toughness and that compressive residual stresses resulted in increased the fracture toughness. The shift in the apparent fracture toughness depended on the magnitude of the residual stresses and material, with the aluminium alloys being more susceptible to the presence of tensile residual stresses. A local approach based on the Beremin model was used to predict failure in the presence of residual stress fields in terms of fracture toughness for cleavage fracture in steel specimens. The overall trends from predictions were similar to the experiments, but there remain limitations in the model. For aluminium specimens, a method based on the William's series was employed to predict the stress intensity corresponding to a residual stress field (Kres). The measured changes in initiation toughness matched the predicted values of K1es.
APA, Harvard, Vancouver, ISO, and other styles
2

Wilks, Martin David Bernard. "The influence of residual stresses on fatigue." Thesis, University of Oxford, 1994. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.240439.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Ntsoane, T. P. "Residual stress in Pt coatings under thermal influence." Master's thesis, University of Cape Town, 2001. http://hdl.handle.net/11427/8778.

Full text
Abstract:
Includes bibliographical references.
Resistance thermometers are commonly employed when accurate temperature measurements are required. The detection part consists of a thin metallic film deposited on a ceramic substrate. In this work, commercially manufactured Pt-Al₂O₃ composites annealed at 0°C, 300°C, 600°C and 1170°C above room temperature were investigated for residual stress using the non-destructive X-ray diffraction technique. The apparatus used for the investigation was a Ψ-goniometer with a scintillation detector. The measured data were analysed with "sin²Ψ"-method. The total stress yielded was found to be a superposition of both the thermal and intrinsic stress in the layer. Analytical model, following the method of Tsui and Clyne, was used to resolve the two stress contributions. With the thermal component being constant, the variation of the observed total stress was attributed to the relaxing intrinsic components. Further investigations of the samples included the microstructure studies using Scanning Electron Microscopy (SEM).
APA, Harvard, Vancouver, ISO, and other styles
4

LaRue, James Edward. "The Influence of Residual Stress on Fatigue Crack Growth." MSSTATE, 2005. http://sun.library.msstate.edu/ETD-db/theses/available/etd-04072005-095303/.

Full text
Abstract:
This thesis discusses the analysis of fatigue crack growth in the presence of residual stresses to determine a suitable method for fatigue life predictions. In the research discussed herein, the prediction methodologies are compared to determine the most accurate prediction technique. Finite element analysis results are presented as well as laboratory test data. The validity of each methodology is addressed and future work is proposed.
APA, Harvard, Vancouver, ISO, and other styles
5

Östlund, Magnus. "Residual stresses in paperboard and the influence of drying conditions." Doctoral thesis, KTH, Solid Mechanics (Div.), 2005. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-469.

Full text
Abstract:

The drying sequence in the manufacturing process for paperboard involves evaporation of water, primarily from within the fibres. The vapour is then transported out of the web by pressure or concentration gradients. As the moisture transport from the paper web to the ambient is quicker than the moisture transport within the fibre network to the surfaces of the web, moisture gradients develop through the thickness of the web. This work concerns effects on the mechanics of paper drying from the variation in moisture through the relatively thin structures of paper and paperboard.

Distributions of inplane residual stresses through paper materials in the unloaded state after drying are believed to be caused by the varying moisture through the thickness during drying. The distributions in general exhibit compressive stress near the board surfaces and tensile stress in the interior of the board. This may be modified after drying and is also affected by structural variation in the material between different plies of multi-ply paperboards.

The stress development during drying is important because it influences the resulting material properties of the paper and because it can lead to curl, which is a quality problem. The residual stresses themselves are an error source in simulation or evaluation of the mechanical behaviour of paper.

In this work, residual stress distributions in paperboard were determined experimentally, to clarify the mechanisms of residual stress build-up. An experimental method for such tests was also developed. Based on the experimental findings, the mechanics of paper drying was modelled and the stress build-up simulated. Simulation offers a way of studying how the properties of paper develop during drying of wet paper webs.

APA, Harvard, Vancouver, ISO, and other styles
6

Östlund, Magnus. "Residual stresses in paperboard and the influence of drying conditions /." Stockholm, 2005. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-469.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Ngiam, Shi Song. "The influence of surface residual stress on fatigue crack growth." Thesis, University College London (University of London), 2007. http://discovery.ucl.ac.uk/1444870/.

Full text
Abstract:
Residual stress exists in most structures and although it has been recognised for a long time, its complex mechanism and characteristics are still being intensively studied. Residual stress can be stratified into damaging residual stress and beneficial residual stress. Surface tensile residual stresses are generally known to reduce the mechanical properties of materials while compressive residual stresses improve the fatigue performance of components. This Ph.D. thesis reports the analytical and experimental work conducted to investigate both the damaging and beneficial effects of residual stress on fatigue crack growth in structural components. The detrimental effect of tensile residual stresses is studied through large scale fatigue testing of T-butt welded plates fabricated from High Strength Steels (HSS). Despite the growing use of HSSs in the offshore industry, the fatigue performance and corrosion resistance of welded joints made from such steels are still not clear. Due to their complex metallurgy and relatively poor weldability, there is still a lack of understanding of the residual stresses that arise from the welding process. This study involved modification and development conducted on a variable amplitude (VA) load-time sequence generator for the investigation of long life fatigue performance of HSS. Emphasis was given to the generation of a stationary load-time history and numerous analyses were presented to demonstrate the importance of the long term statistical nature of the load-time sequence on fatigue testing. Fatigue test results obtained were extensively compared with previous HSS corrosion fatigue studies. The effect of tensile residual stress on fatigue crack growth was investigated using a SIF weight function-based fatigue crack growth model. Two newly developed preferential cold working techniques termed stitch cold rolling and stitch shot peening were explored to investigate the beneficial effect of surface compressive residual stress on fatigue crack growth in mild steel plates. One of the main objectives of this study was to control the fatigue crack shape by the manipulation of surface residual stress fields. The stitch cold rolling technique was implemented using a custom-built cold rolling jig. The feasibility of preferential cold working techniques was further investigated by the fatigue testing of stitch shot peened specimens. Both experimental programmes yielded unprecedented fatigue crack growth results. A residual stress monitoring programme was conducted to study the residual stress relaxation behaviour under cyclic loading. The experimental test results enabled the investigation of SIF solutions in non-uniform stress fields. A novel fatigue crack growth evolution model, which takes into account residual stress relaxation effects, was developed using the powerful SIF weight function methods.
APA, Harvard, Vancouver, ISO, and other styles
8

Royston, Jonathan M. "The influence of posterior corneal surface astigmatism on residual astigmatism." Thesis, Aston University, 1990. http://publications.aston.ac.uk/14636/.

Full text
Abstract:
It has often been found that corneal astigmatism exceeds the amount exhibited by the eye as a whole. This difference is usually referred to as residual astigmatism. Scrutiny of the studies of corneal astigmatismreveal that what has actually been measured is the astigmatic contributionof the anterior corneal surface alone. This anterior surface is easily measured whereas measurement of the posterior corneal surface is much moredifficult. A method was therefore developed to measure the radius and toricity of the posterior corneal surface. The method relies upon photography of the first and second Purkinje images in three fixed meridians. Keratometry, comparison of anterior and posterior corneal Purkinje images and pachometricdata were applied to three meridional analysis equations, allowing the posterior corneal surface to be described in sphero-cylindrical form. Measurements were taken from 80 healthy subjects from two distinct age groups. The first consisted of 60 young subjects, mean age 22.04 years and the second consisted of 20 old subjects, mean age 74.64 years. The young group consisted of 28 myopes, 24 emmetropes and 8 hyperopes. The old group consisted of 6 myopes and 14 hyperopes. There was an equal number of males and females in each group. These groupings allowed the study of the effects of age, ametropia and gender on the posterior corneal toricity. The effect of the posterior corneal surface on residual astigmatism was assessed and was found to cause an overall reduction. This reduction was due primarily to the posterior corneal surface being consistently steeper relative to the anterior surface in the vertical meridian compared to the horizontal meridian.
APA, Harvard, Vancouver, ISO, and other styles
9

Silva, Neto Luiz Vieira da 1987. "Efeito residual no triathlon : como nadar influência nas etapas seguintes." [s.n.], 2014. http://repositorio.unicamp.br/jspui/handle/REPOSIP/275116.

Full text
Abstract:
Orientador: Orival Andries Júnior
Dissertação (mestrado) - Universidade Estadual de Campinas, Faculdade de Educação Física
Made available in DSpace on 2018-08-24T05:58:49Z (GMT). No. of bitstreams: 1 SilvaNeto_LuizVieirada_M.pdf: 895752 bytes, checksum: 969b92939cb56474d2c75ca0ebb18906 (MD5) Previous issue date: 2014
Resumo: O Triathlon é uma modalidade esportiva composta por três etapas, que são nadar, pedalar e correr. Diversos estudos vem investigando como nadar influencia etapas seguintes, mas os resultados ainda são controversos em alguns aspectos. Existem estudos, que falam da importância de nadar para o desempenho geral da prova, pois à medida em que às distâncias das provas variam, a correlação com o resultado final varia. Com isso o objetivo do presente estudo foi analisar como nadar 375 metros pode influenciar durante o pedalar e o correr, além do resultado geral em uma prova simulada de triathlon super sprint (nadar 375m- pedalar 10Km-correr 2.5Km). Foram avaliados 8 triatletas amadores, (27 ± 4 anos; 75 ± 6 kg; 179 ± 7 cm), que assinaram o termo de consentimento livre e esclarecido (TCLE), que foi aprovado junto ao projeto de pesquisa pelo comitê de ética em pesquisa da Unicamp com o Nº8999/2012. Foram realizados três protocolos de avaliação: 1º Triathlon (Tri) que consistia em nadar 375m, pedalar 10Km e correr 2.5Km, no 2º Pedalar e Correr (PC) onde o voluntário deveria pedalar 10Km e correr 2.5Km e no 3º Correr (C) e último o voluntário teve de correr 2.5Km. Todas as coletas foram randomizadas e obedeceram um intervalo que tinha o mínimo de 48 horas. Os dados foram analisados através de estatística descritiva, a normalidade foi testada através do teste de Shapiro-Wilk e após a normalidade dos dados aceita, foi usado o teste "t" pareado para se comparar duas situações e a correlação de Pearson de um momento com o outro, os resultados da presente pesquisa foram expostos em dois artigos. No primeiro estudo, nadar reduziu o desempenho do pedalar (-8,4%) e o tempo total (pedalar + correr; -5,4%) quando comparados à realização das mesmas sem a presença prévia do nadar, todas as etapas analisadas, com exceção do correr em PC, houveram correlações significativas com o tempo total de prova. No segundo estudo, houve diferença significativa nas variáveis, potência média e máxima, potência relativa média e máxima, além de velocidade média e máxima, entre os protocolos Tri e PC. Com base nos achados da presente pesquisa, concluímos que nadar previamente, reduz o desempenho do pedalar, mas não influencia no desempenho do correr, mesmo dessa forma o tempo total de prova foi influenciado, pelo nadar previamente
Abstract: Triathlon is a sport consisting of three stages, which are swimming, biking and running. Several studies have been investigating how swimming may influence on biking and how biking may influence on running, but the results still controversial in some aspects. There are studies that pointed out the importance of swimming for the overall performance in the competition. As the shorter the competition, the bigger the correlation with the final result were found. Therefore, the aim of this study is to analyze how to swim 375 meters may influence biking and running and the overall outcome in a simulated competition of super sprint triathlon (375m swim, 10km cycle, run 2,5 Km). Eight amateur triathletes (27 ± 4 years, 75 ± 6 kg, 179 ± 7 cm), who signed the consent form which was approved by UNICAMP research and ethics committee with number 8999/2012. Three protocols of evaluation were performed: 1st Tri which consisted of swimming 375m, cycling 10km and running 2.5 km; in the 2nd CR the volunteer should cycle 10km and run 2.5 km and in the 3rd R and the last one, the volunteer had to run 2, 5km. All samples were randomized and they had a minimum of 48 hours rest. The data was analyzed using descriptive statistics. Normality was tested by the Shapiro-Wilk. "t" paired test was used to compare the situations and the correlation of Pearson of one moment with other. In the first study, swimming reduced biking performance (-8.4%) and the total time (cycling + running; -5.4%) when compared to the performance of biking and running without the prior presence of swimming. All stages analyzed, with exception of running on BR had significant correlations with the total time of the competition. In the second study, there were significant differences in the variables, average power, maximum power and maximum average relative, and average and maximum speed between the Tri and BR protocols. Based on the results of this research, we concluded that to perform swimming first reduces cycling performance, but does not influence the performance of the run. Finally the total time of the competition was influenced by the pre-swim
Mestrado
Biodinamica do Movimento e Esporte
Mestre em Educação Física
APA, Harvard, Vancouver, ISO, and other styles
10

Wafa, Al-Dajani Waleed. "On the bleachability of alkaline pulps : the influence of residual lignin structure /." Doctoral thesis, Stockholm, 2001. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-3231.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Residual influence"

1

Diamond, I. D. CEC joint study of community response to aircraft noise 1984: main report: The influence of residual noise in disturbance from aircraft noise. London: Civil Aviation Authority, 1986.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Little, Susan N. The influence of residue removal and prescribed fire on distributions of forest nutrients. [Portland, Or.]: U.S. Dept. of Agriculture, Forest Service, Pacific Northwest Forest and Range Experiment Station, 1985.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Varma, Devendra Prasad. The Gothic flame: Being a history of the Gothic novel in England : its origins, efflorescence, disintegration, and residuary influences. Metuchen, N.J: Scarecrow Press, 1987.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

International Symposium on Heavy Oil and Residue Upgrading and Utilization (1992 Fushun, Liaoning, China). influence of feedstock composition on the coke formation International Symposium on Heavy Oil and Residue Upgrading and Utilization: Proceedings : May 5-8, 1992. Edited by Han Chongren, Hsi Chu, Alberta Oil Sands Technology and Research Authority., Chung-kuo shih hua tsung kung ssu., and Fushun Research Institute of Petroleum and Petrochemicals. Beijing: International Academic Publishers, 1992.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Keller, H. P. Residual Stresses and Their Influence for Detection and Sizing of Defects (Residual Stresses and Their Influence for Detection and Sizing of Defects). European Communities / Union (EUR-OP/OOPEC/OPOCE), 1992.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

E, Wilt T., and United States. National Aeronautics and Space Administration., eds. Influence of engineered interfaces on residual stresses and mechanical response in metal. Washington, DC: National Aeronautics and Space Administration, 1992.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

An estimated residual volume: Influence on the measurement of body density by the hydrostatic weighing technique. 1991.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

An estimated residual volume: Influence on the measurement of body density by the hydrostatic weighing technique. 1988.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Qureshi, Maqsood Hassan. Tall fescue growth and nitrogen uptake as influenced by non-thermal residue management. 1994.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Residual thermal and moisture influences on the strain energy release rate analysis of local delaminations from matrix cracks. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1991.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Residual influence"

1

Urashima, Chikayuki, Shin-ichi Nishida, and Kazuo Sugino. "The Influence of Residual Stress on Durability of Rails." In International Conference on Residual Stresses, 912–18. Dordrecht: Springer Netherlands, 1989. http://dx.doi.org/10.1007/978-94-009-1143-7_152.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Buresch, F. E., E. Babilon, and G. Kleist. "Influence of Residual Stresses on Cracking of some Ceramics." In International Conference on Residual Stresses, 1003–8. Dordrecht: Springer Netherlands, 1989. http://dx.doi.org/10.1007/978-94-009-1143-7_168.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Brinksmeier, E., and H. G. Wobker. "Residual Stresses in Tool Ceramics and Their Influence on Tool Life." In International Conference on Residual Stresses, 267–72. Dordrecht: Springer Netherlands, 1989. http://dx.doi.org/10.1007/978-94-009-1143-7_44.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Pfeiffer, W., R. Prümmer, and E. Reisacher. "The X-Ray Elastic Constants of Alumina -Influence of Elastic Anisotropy." In International Conference on Residual Stresses, 347. Dordrecht: Springer Netherlands, 1989. http://dx.doi.org/10.1007/978-94-009-1143-7_57.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Thiery, J., P. Archambault, and F. Moreaux. "Influence of a Traction Stress on the Hardening Kinetics of Aluminium Alloys." In International Conference on Residual Stresses, 771–76. Dordrecht: Springer Netherlands, 1989. http://dx.doi.org/10.1007/978-94-009-1143-7_129.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Šijački-žeravčiĆ, Vera, Mileva RogulĆ, and Vojislav SimiĆ. "The Influence of Thermomechanical Treatment on Residual Elastic Microstrain in an Aluminium Alloy." In International Conference on Residual Stresses, 765–70. Dordrecht: Springer Netherlands, 1989. http://dx.doi.org/10.1007/978-94-009-1143-7_128.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Ekkad, N. V., and C. O. Huber. "Residual Sulfite After Dechlorination of Water." In Clean Water: Factors that Influence Its Availability, Quality and Its Use, 295–300. Dordrecht: Springer Netherlands, 1996. http://dx.doi.org/10.1007/978-94-009-0299-2_28.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Le Duff, J. A., and D. Masalski. "Influence of Residual Stress and Geometry in the Design Fatigue Life of Spot Welds." In International Conference on Residual Stresses, 959–64. Dordrecht: Springer Netherlands, 1989. http://dx.doi.org/10.1007/978-94-009-1143-7_161.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Wohlfahrt, Helmut, and Thomas Nitschke. "Influence of Residual Welding Stresses on the Fatigue Behaviour of the High Strength Steel StE 690." In International Conference on Residual Stresses, 932. Dordrecht: Springer Netherlands, 1989. http://dx.doi.org/10.1007/978-94-009-1143-7_156.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Bacher, M., D. Zhang, B. Scholtes, O. Vöhringer, and E. Macherauch. "The Influence of Homogeneous Tension and Compression Loading on the Residual Stress State of Case-Hardened Steels." In International Conference on Residual Stresses, 753–58. Dordrecht: Springer Netherlands, 1989. http://dx.doi.org/10.1007/978-94-009-1143-7_126.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Residual influence"

1

"Residual Stress Influence on the Flexural Buckling of Welded I-Girders." In Residual Stresses 10. Materials Research Forum LLC, 2016. http://dx.doi.org/10.21741/9781945291173-19.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

"Reviewing the Influence of Welding Setup on FE-Simulated Welding Residual Stresses." In Residual Stresses 2018. Materials Research Forum LLC, 2018. http://dx.doi.org/10.21741/9781945291890-31.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

"Influence of the Pre-Stressing on the Residual Stresses Induced by Deep Rolling." In Residual Stresses 10. Materials Research Forum LLC, 2016. http://dx.doi.org/10.21741/9781945291173-43.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

"Influence of Weld Repair by Gouging on the Residual Stresses in High Strength Steels." In Residual Stresses 10. Materials Research Forum LLC, 2016. http://dx.doi.org/10.21741/9781945291173-29.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

"Comparing the Influence of Residual Stresses in Bearing Fatigue Life at Line and Point Contact." In Residual Stresses 2018. Materials Research Forum LLC, 2018. http://dx.doi.org/10.21741/9781945291890-34.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

"Influence of Heat Control on Residual Stresses in Low Transformation Temperature (LTT) Large Scale Welds." In Residual Stresses 10. Materials Research Forum LLC, 2016. http://dx.doi.org/10.21741/9781945291173-38.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

"Comparison of Submerged Arc Welding Process Modification Influence on Thermal Strain by in-situ Neutron Diffraction." In Residual Stresses 10. Materials Research Forum LLC, 2016. http://dx.doi.org/10.21741/9781945291173-90.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

"Influence of Surface Pretreatment on Residual Stress Field of Heat-Treated Steel Induced by Laser Local Quenching." In Residual Stresses 2018. Materials Research Forum LLC, 2018. http://dx.doi.org/10.21741/9781945291890-28.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

"Simulative Investigations of the Influence of Surface Indentations on Residual Stresses on Inner Raceways for Roller Element Bearings." In Residual Stresses 10. Materials Research Forum LLC, 2016. http://dx.doi.org/10.21741/9781945291173-69.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

"Numerical Simulation of Residual Stresses Induced by Weld Repair in a Stainless Steel Pipe Considering the Influence of an Initial Fabrication Weld." In Residual Stresses 10. Materials Research Forum LLC, 2016. http://dx.doi.org/10.21741/9781945291173-14.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Residual influence"

1

Misiolek, Wojciech Z., and Pawel Kazanowski. Evaluation of Residual Stresses and Their Influence on Distortion in the Decoiling and Welding Processes. Fort Belvoir, VA: Defense Technical Information Center, August 2002. http://dx.doi.org/10.21236/ada412862.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Parker, Anthony P., and John H. Underwood. Influence of the Bauschinger Effect on Residual Stress and Fatigue Lifetimes in Autofrettaged Thick-Walled Cylinders. Fort Belvoir, VA: Defense Technical Information Center, September 1997. http://dx.doi.org/10.21236/ada330071.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Karlson, Kyle N., Michael Stender, and Guy Leshem Bergel. Assessing the Influence of Process Induced Voids and Residual Stresses on the Failure of Additively Manufactured 316L Stainless Steel. Office of Scientific and Technical Information (OSTI), January 2020. http://dx.doi.org/10.2172/1593545.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Bando, Rosangela, Otavio Canozzi, José Martínez, and Ana Lucía Dezolt. May I Calculate Your Taxes?: The Effect of Bookkeeping on Tax Compliance under a Simplified Regime. Inter-American Development Bank, May 2021. http://dx.doi.org/10.18235/0003386.

Full text
Abstract:
Many countries worldwide face significant miss reporting in tax declarations. Miss reporting leads to undesired low revenue and economic distortions. This paper discusses the extent to which the residual bookkeeping burden faced by small firms in simplified regimes influence tax declarations. A randomized control trial among 1,500 irregular firms in Piaui, Brazil showed that adding the tax amount due and records on transactions to a warning notification improved compliance in 21 percentage points and increased the reported revenue in 39 percent. Firms without an accountant were less likely to regularize their status without the added information. These findings suggest the use of third party information to support voluntary compliance may present an opportunity for digital services to improve tax revenue services.
APA, Harvard, Vancouver, ISO, and other styles
5

Little, S.N., and G. O. Klock. The influence of residue removal and prescribed fire on distributions of forest nutrients. Portland, OR: U.S. Department of Agriculture, Forest Service, Pacific Northwest Forest and Range Experiment Station, 1985. http://dx.doi.org/10.2737/pnw-rp-338.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Residual influence' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography