Books on the topic 'Resin ?????? Testing'

Neilson, R. M. EPICOR-II resin waste form testing. Washington, DC: Division of Waste Management, Office of Nuclear Material Safety and Safeguards, U.S. Nuclear Regulatory Commission, 1986.

Neilson, R. M. EPICOR-II resin waste form testing. Washington, DC: Division of Waste Management, Office of Nuclear Material Safety and Safeguards, U.S. Nuclear Regulatory Commission, 1986.

Neilson, R. M. EPICOR-II resin waste form testing. Washington, DC: Division of Waste Management, Office of Nuclear Material Safety and Safeguards, U.S. Nuclear Regulatory Commission, 1986.

Bartels, John R. Comparative laboratory evaluation of resin-grouted roof bolt elements. Washington, D.C: U.S. Dept. of the Interior, Bureau of Mines, 1985.

Wuest, William J. Time effects on resin-grouted bolt anchorage characteristics. Washington, D.C: U.S. Dept. of the Interior, Bureau of Mines, 1991.

Nettles, A. T. Low temperature mechanical testing of carbon-fiber/epoxy-resin composite materials. Washington, D.C: National Aeronautics and Space Administration, 1996.

Jegley, Dawn C. Structural testing of a stitched/resin film infused graphite-epoxy wing box. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 2001.

Tadolini, Stephen C. Transfer mechanics of full-column resin-grouted roof bolts. Washington, D.C: Bureau of Mines, U.S. Dept. of the Interior, 1990.

Tadolini, Stephen C. Transfer mechanics of full-column resin-grouted roof bolts. Washington, D.C. (2401 E St., N.W., MS #9800, Washington 20241-0001): U.S. Dept. of the Interior, Bureau of Mines, 1991.

Byczkowska, Maria. Analiza naprężeń wywołanych skurczem utwardzania żywic epoksydowych i poliestrowych. Warszawa: Wydawnictwa Politechniki Warszawskiej, 1987.

Fraley, J. E. Bolt anchorage with gypsum-plaster water capsule cartridges. [Avondale, Md.]: U.S. Dept. of the Interior, Bureau of Mines, 1987.

Sohi, Mohsen M. The effect of resin toughness and modulus on compressive failure modes of quasi-isotropic graphite/epoxy laminates. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1986.

Sohi, Mohsen M. The effect of resin toughness and modulus on compressive failure modes of quasi-isotropic graphite/epoxy laminates. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1986.

Wang, Brad. Development of high-performance and durable engineered wood products from mountain pine beetle veneers using novel resin impregnation technologies. Victoria, B.C: Pacific Forestry Centre, 2009.

Rogers, Robert D. Biodegradation testing of TMI-2 EPICOR-II waste forms. Washington, D.C: The Division, 1988.

Lance, D. G. Low velocity instrumented impact testing of four new damage tolerant carbon/epoxy composite systems. Huntsville, Ala: George C. Marshall Space Flight Center, 1990.

McIsaac, C. V. The leachability of decontamination ion-exchange resins solidified in cement at operating nuclear power plants. Washington, DC: Division of Engineering, Office of Nuclear Regulatory Research, U.S. Nuclear Regulatory Commission, 1989.

Laufenberg, Theodore. Field performance testing of improved engineered wood fiber surfaces for accessible playground areas. Madison, WI (One Gifford Pinchot Dr., Madison 53726-2398): U.S. Dept. of Agriculture, Forest Service, Forest Products Laboratory, 2003.

Laufenberg, Theodore. Field performance testing of improved engineered wood fiber surfaces for accessible playground areas. Madison, WI: U.S. Dept. of Agriculture, Forest Service, Forest Products Laboratory, 2003.

Collins, J. Scott. Static and free-vibrational response of semi-circular graphite-epoxy frames with thin-walled open sections. Hampton, Va: Langley Research Center, 1990.

California Integrated Waste Management Board., California State University Chico, and California State University, Chico. University Foundation., eds. Postconsumer resin quality assurance and testing protocol. Sacramento: California Integrated Waste Management Board, 2005.

J, Biss Emily, and George C. Marshall Space Flight Center., eds. Low temperature mechanical testing of carbon-fiber/epoxy-resin composite materials. Marshall Space Flight Center, Ala: National Aeronautics and Space Administration, George C. Marshall Space Flight Center, 1996.

Center, Langley Research, ed. Standard test evaluation of graphite fiber/resin matrix composite materials for improved toughness. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1987.

G, Bush Harold, and Langley Research Center, eds. Structural testing of a stitched/resin film infused graphite-epoxy wing box. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 2001.

IEEE Power Engineering Society. Transformers Committee., Institute of Electrical and Electronics Engineers., and IEEE Standards Board, eds. IEEE guide for test procedures for thermal evaluation of insulation systems for solid-cast and resin-encapsulated power and distribution transformers. New York, N.Y., USA: Institute of Electrical and Electronics Engineers, 1998.

C57.12.60-1998 IEEE Guide for Test Procedures for Thermal Evaluation of Insulation Systems for Solid-Cast and Resin-Encapsulated Power and. Inst of Elect & Electronic, 1999.

Institute, American National Standards, and IEEE Power Engineering Society. Transformers Committee., eds. IEEE trial-use standard test procedures for thermal evaluation of insulation systems for solid-cast and resin-encapsulated power and distribution transformers. New York, N.Y: The Institute of Electrical and Electronics Engineers, Inc., 1993.

Pultrusion process development for long space boom model. [Washington, D.C.]: National Aeronautics and Space Administration, Scientific and Technical Information Division, 1988.

Branch, Ontario Waste Management, Canadian Oxy Chemicals Ltd, Zenon Environmental Inc, Industrial Waste Diversion Program (Ont.), and Ontario. Ministry of the Environment., eds. Assessment of alternative phenol recovery processes phase II pilot scale testing: Report. [Toronto]: Ontario, Ministry of the Environment, Waste Management Branch, 1991.

D, Rogers Robert, U.S. Nuclear Regulatory Commission. Division of Waste Management., and EG & G Idaho., eds. Field testing of waste forms containing EPICOR-II ion exchange resins using lysimeters. Washington, D.C: Division of Waste Management, Office of Nuclear Material Safety and Safeguards, U.S. Nuclear Regulatory Commission, 1986.

T, Nettles A., and George C. Marshall Space Flight Center., eds. A novel method of testing the shear strength of thick honeycomb composites. [Washington, D.C.]: National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Division, 1991.

George C. Marshall Space Flight Center., ed. Permeability testing of composite material and adhesive bonds for the DC-XA composite feedline program. [Marshall Space Flight Center, Ala: National Aeronautics and Space Administration, George C. Marshall Space Flight Center, 1995.

E, Masters John, and Langley Research Center, eds. Standard methods for open hole tension testing of textile composites. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1995.

Paint-Pigments, Drying Oils, Polymers, Resins, Naval Stores, Cellulosic Esters, and Ink Vehicles (Annual Book of a S T M Standards Volume 0603). Astm Intl, 1999.

United States. National Aeronautics and Space Administration. Scientific and Technical Information Division., ed. Instrumented impact and residual tensile strength testing of eight-ply carbon/epoxy specimens. [Washington, D.C.]: National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Division, 1990.

Alberta Research Council. Industrial Technologies Dept. Forest Products Program., Canadian Forestry Service, Alberta Forest Service, and Canada-Alberta Forest Resource Development Agreement., eds. Oriented strandboard (OSB) optimization: FP 2.1.1. Edmonton, Alta: Canadian Forestry Service, 1987.

An examination of impact damage in glass/phenolic and aluminum honeycomb core composite panels. Washington, D.C: National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Division, 1990.

R, Johnson Eric, NASA-Virginia Tech Composites Program, Virginia Polytechnic Institute and State University. Center for Composite Materials and Structures., and Langley Research Center. Landing and Impact Dynamics Branch., eds. Static and free-vibrational response of semi-circular graphite-epoxy frames with thin-walled open sections. Blacksburg, Va: College of Engineering, Virginia Polytechnic Institute and State University, 1989.

R, Johnson Eric, Virginia Polytechnic Institute and State University. Engineering Science and Mechanics Dept., and Langley Research Center, eds. Static and free-vibrational response of semi-circular graphite-epoxy frames with thin-walled open sections. Washington, D.C: National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Division, 1990.

Static and free-vibrational response of semi-circular graphite-epoxy frames with thin-walled open sections. Washington, D.C: National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Division, 1990.

R, Johnson Eric, Virginia Polytechnic Institute and State University. Engineering Science and Mechanics Dept., and Langley Research Center, eds. Static and free-vibrational response of semi-circular graphite-epoxy frames with thin-walled open sections. Washington, D.C: National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Division, 1990.

R, Johnson Eric, NASA-Virginia Tech Composites Program, Virginia Polytechnic Institute and State University. Center for Composite Materials and Structures., and Langley Research Center. Landing and Impact Dynamics Branch., eds. Static and free-vibrational response of semi-circular graphite-epoxy frames with thin-walled open sections. Blacksburg, Va: College of Engineering, Virginia Polytechnic Institute and State University, 1989.

R, Johnson Eric, NASA-Virginia Tech Composites Program, Virginia Polytechnic Institute and State University. Center for Composite Materials and Structures., and Langley Research Center. Landing and Impact Dynamics Branch., eds. Static and free-vibrational response of semi-circular graphite-epoxy frames with thin-walled open sections. Blacksburg, Va: College of Engineering, Virginia Polytechnic Institute and State University, 1989.