Log in

Relevant bibliographies by topics / Resin Transfer Molding / Journal articles

To see the other types of publications on this topic, follow the link: Resin Transfer Molding.

Journal articles on the topic 'Resin Transfer Molding'

Author: Grafiati

Published: 4 June 2021

Last updated: 25 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 journal articles for your research on the topic 'Resin Transfer Molding.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

Hancioglu, Mert, E. Murat Sozer, and Suresh G. Advani. "Comparison of in-plane resin transfer molding and vacuum-assisted resin transfer molding ‘effective’ permeabilities based on mold filling experiments and simulations." Journal of Reinforced Plastics and Composites 39, no. 1-2 (2019): 31–44. http://dx.doi.org/10.1177/0731684419868015.

Full text

Abstract:

Resin transfer molding and vacuum-assisted resin transfer molding are two of the most commonly used liquid composite molding processes. For resin transfer molding, mold filling simulations can predict the resin flow patterns and location of voids and dry spots which has proven useful in designing the mold and injection locations for composite parts. To simulate vacuum-assisted resin transfer molding, even though coupled models are successful in predicting flow patterns and thickness distribution, the input requires fabric compaction characterization in addition to permeability characterization

APA, Harvard, Vancouver, ISO, and other styles

2

Young, Wen-Bin, and Cheng-Wey Chiu. "Study on Compression Transfer Molding." Journal of Composite Materials 29, no. 16 (1995): 2180–91. http://dx.doi.org/10.1177/002199839502901605.

Full text

Abstract:

Resin transfer molding (RTM) finishes the resin impregnation and composite fabrication at the same time. It simplifies the process for composites fabrication and has the advantages of automation, low cost, and versatile design of fiber reinforcement. Therefore, the RTM process is widely used in the architecture, automotive, and aerospace industries. However, in the RTM process, resin must flow through the fiber reinforcement in the planar direction, which, in some cases such as fabrications of large panels, may need a long time for the mold filling. If the part dimension is too large or the fi

APA, Harvard, Vancouver, ISO, and other styles

3

Park, M., and M. V. Tretyakov. "Stochastic Resin Transfer Molding Process." SIAM/ASA Journal on Uncertainty Quantification 5, no. 1 (2017): 1110–35. http://dx.doi.org/10.1137/16m1096578.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Lin, M. Y., M. J. Murphy, and H. T. Hahn. "Resin transfer molding process optimization." Composites Part A: Applied Science and Manufacturing 31, no. 4 (2000): 361–71. http://dx.doi.org/10.1016/s1359-835x(99)00054-8.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Nguyen, Huu Hieu, Dae Woo Lee, Quang Trung Troung, et al. "Effects of Graphene on a Resin Transfer Molding Process Using Bisphenol A Based Epoxy Resin." Advanced Materials Research 123-125 (August 2010): 535–38. http://dx.doi.org/10.4028/www.scientific.net/amr.123-125.535.

Full text

Abstract:

Resin transfer molding is a popular process to fabricate polymer composites reinforced with a large amount of glass or carbon fibers. In general, fiber reinforcements are put in a mold, and a liquid resin such as epoxy resin is injected into the mold after preheating. For successful production of polymer composites via a resin transfer molding process, the filling and curing stages of the liquid resin as well as the mold design should be optimized. Recently, polymer composites reinforced with nanoparticles are attracting attention of researchers in academia and industries because efficient rei

APA, Harvard, Vancouver, ISO, and other styles

6

Ouezgan, Ahmed, Said Adima, Aziz Maziri, El Hassan Mallil, and Jamal Echaabi. "Compression Resin Transfer Molding Using Inflatable Seals." Key Engineering Materials 900 (September 20, 2021): 3–8. http://dx.doi.org/10.4028/www.scientific.net/kem.900.3.

Full text

Abstract:

Compression resin transfer molding using inflatable seals is a new variant of LCM (“Liquid composite molding”) processes, which uses the inflatable seals to compress the fiber reinforcements and drive the resin to impregnate the fabric preform, resulting to fill the entire mold cavity. During resin injection, the preform is relaxed. Consequently, the resin enters easily and quickly into the mold cavity. After, the necessary resin is injected into the mold cavity, the compression stage takes place, in a stepwise manner, by swelling the inflatable seals. The objective of this paper is to present

APA, Harvard, Vancouver, ISO, and other styles

7

Jovanovic, Vojin, Souran Manoochehri, and Constantin Chassapis. "Parameter estimation for resin transfer molding." Engineering Computations 18, no. 8 (2001): 1091–107. http://dx.doi.org/10.1108/02644400110409186.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Ismail, Youssef M., and George S. Springer. "Interactive Simulation of Resin Transfer Molding." Journal of Composite Materials 31, no. 10 (1997): 954–80. http://dx.doi.org/10.1177/002199839703101001.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Velten, Kai. "Inverse Problems in Resin Transfer Molding." Journal of Composite Materials 32, no. 24 (1998): 2178–202. http://dx.doi.org/10.1177/002199839803202401.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Iglesias, Marco, Minho Park, and M. V. Tretyakov. "Bayesian inversion in resin transfer molding." Inverse Problems 34, no. 10 (2018): 105002. http://dx.doi.org/10.1088/1361-6420/aad1cc.

Full text

APA, Harvard, Vancouver, ISO, and other styles

11

Dessenberger, Richard B., and Charles L. Tucker. "Thermal dispersion in resin transfer molding." Polymer Composites 16, no. 6 (1995): 495–506. http://dx.doi.org/10.1002/pc.750160608.

Full text

APA, Harvard, Vancouver, ISO, and other styles

12

Kang, Kai, and Kurt Koelling. "Void transport in resin transfer molding." Polymer Composites 25, no. 4 (2004): 417–32. http://dx.doi.org/10.1002/pc.20035.

Full text

APA, Harvard, Vancouver, ISO, and other styles

13

Parnas, Richard S., and Shawn M. Walsh. "Vacuum-assisted resin transfer molding model." Polymer Composites 26, no. 4 (2005): 477–85. http://dx.doi.org/10.1002/pc.20121.

Full text

APA, Harvard, Vancouver, ISO, and other styles

14

Wang, T. J., R. J. Lin, and L. J. Lee. "Tool Heat Transfer Analysis in Resin Transfer Molding." International Polymer Processing 10, no. 4 (1995): 364–73. http://dx.doi.org/10.3139/217.950364.

Full text

APA, Harvard, Vancouver, ISO, and other styles

15

Bankov, Blagovest, Todor Todorov, Yavor Sofronov, and Ivan Ivanov. "A MULTI-STEP APPROACH FOR ANALYZING THE NUMBER OF POLYMER INJECTION MOLDING GATE SPOTS AND THEIR POSITION IN T-RTM TECHNOLOGY." ENVIRONMENT. TECHNOLOGIES. RESOURCES. Proceedings of the International Scientific and Practical Conference 3 (June 22, 2024): 20–23. http://dx.doi.org/10.17770/etr2024vol3.8142.

Full text

Abstract:

The purpose of this study is to present a multi-step approach for building a virtual analysis supporting the determination of the number and position of the injection molding gate spots in Resin Transfer Molding (RTM) and the relatively new Thermoplastic Resin Transfer Molding (T-RTM) technologies. The methodology provides an opportunity to determine the behavior of the fluid flow based on the location of the inlets, as well as potential problems and defects.

APA, Harvard, Vancouver, ISO, and other styles

16

Sales, Rita de Cássia Mendonça, Silas Rodrigo Gusmão, Ricardo Francisco Gouvêa, et al. "The temperature effects on the fracture toughness of carbon fiber/RTM-6 laminates processed by VARTM." Journal of Composite Materials 51, no. 12 (2016): 1729–41. http://dx.doi.org/10.1177/0021998316679499.

Full text

Abstract:

The increasing use of composite in the aircraft industry has raised the interest for a better understanding of the failure process in these materials, which can be also influenced by the manufacturing process of the laminate. Some materials used in vacuum assisted resin transfer molding process have been studied in the open literature but very few data have been published for resin transfer molding-6 epoxy based laminates, in particular studies showing the influence of the temperature on the interlaminar fracture behavior of this type of laminates. The aim of this article is to investigate the

APA, Harvard, Vancouver, ISO, and other styles

17

URANO, Akihiro, Akihiro WADA, Hiroya YAMAMOTO, and Yoshimichi FUJII. "Ultrasonic Testing of Resin Impregnation in Resin Transfer Molding." Proceedings of Mechanical Engineering Congress, Japan 2019 (2019): J04308P. http://dx.doi.org/10.1299/jsmemecj.2019.j04308p.

Full text

APA, Harvard, Vancouver, ISO, and other styles

18

Chang, Chih-Yuan. "Modeling and evaluation of the filling process of vacuum-assisted compression resin transfer molding." Journal of Polymer Engineering 33, no. 3 (2013): 211–19. http://dx.doi.org/10.1515/polyeng-2012-0160.

Full text

Abstract:

Abstract In the present study, a modified vacuum-assisted compression resin transfer molding (VACRTM) process has been developed to reduce the cycling period. The process uses an elastic bag placed between the upper mold and the preform to replace the mobile rigid mold in compression resin transfer molding. During resin injection, the bag is pulled upward by the vacuum applied in between the upper mold and the bag, and a loose fiber stack is then present. Resin is easily injected into the mold. Once enough volume of resin is injected, the compression pressure is applied on the bag, which compa

APA, Harvard, Vancouver, ISO, and other styles

19

de Oliveira, Iran Rodrigues, Sandro Campos Amico, Jeferson Avila Souza, F. Ferreira Luz, R. Barcella, and Antônio Gilson Barbosa de Lima. "Resin Transfer Molding Process: A Numerical Investigation." Defect and Diffusion Forum 334-335 (February 2013): 193–98. http://dx.doi.org/10.4028/www.scientific.net/ddf.334-335.193.

Full text

Abstract:

In the processing of high performance composite materials, the RTM process has been widely used by many sectors of the industry. This process consists in injecting a polymeric resin through a fibrous reinforcement arranged within a mold. In this sense, this study aims to simulate the rectilinear infiltration of pure resin and filled resin (40% CaCO3) in a mold with glass fiber preform, using the PAM-RTM commercial software. Numerical results of the filling time and fluid front flow position over time were assessed by comparison with the experimental data and a good accuracy was obtained.

APA, Harvard, Vancouver, ISO, and other styles

20

de Oliveira, Iran Rodrigues, Sandro Campos Amico, Jeferson Avila Souza, and Antônio Gilson Barbosa de Lima. "Resin Transfer Molding Process: A Numerical Analysis." Defect and Diffusion Forum 353 (May 2014): 44–49. http://dx.doi.org/10.4028/www.scientific.net/ddf.353.44.

Full text

Abstract:

This work aims to investigate the infiltration of a CaCO3filled resin using experiments and the PAM-RTM software. A preform of glass fiber mat, with dimensions 320 x 150 x 3.6 mm, has been used for experiments conducted at room temperature, with injection pressure of 0.25bar. The resin contained 10 and 40% CaCO3content with particle size 38μm. The numerical results were evaluated by direct comparison with experimental data. The flat flow-front profile of the rectilinear flow was reached approximately halfway the length of the mold. It was observed, that the speed of the filling decreases with

APA, Harvard, Vancouver, ISO, and other styles

21

Wu, Chien-Chih, and Wen-Bin Young. "On the Fabrication Processes of Structural Supercapacitors by Resin Transfer Molding and Vacuum-Assisted Resin Transfer Molding." Journal of Composites Science 8, no. 10 (2024): 418. http://dx.doi.org/10.3390/jcs8100418.

Full text

Abstract:

This study investigated the manufacturing processes for structural supercapacitors (SSCs) using smear molding (RS), resin transfer molding (RTM), and vacuum-assisted resin transfer molding (VARTM). Woven carbon fibers were used as the electrode, woven glass fibers as an insulating layer, and an alkaline/epoxy compound as the electrolyte. In the RTM process, due to the vacuum and the high-pressure injection of the electrolyte, the electrochemical and mechanical properties of the SSC can be greatly improved, and the void contents in the SSC can be reduced. The balanced electrochemical performanc

APA, Harvard, Vancouver, ISO, and other styles

22

Gartner, Benjamin, Vikram Yadama, and Lloyd Smith. "Resin Transfer Molding of Wood Strand Composite Panels." Forests 13, no. 2 (2022): 278. http://dx.doi.org/10.3390/f13020278.

Full text

Abstract:

The purpose of this study was to develop high-performance wood strand panels for automotive application using resin transfer and compression resin transfer molding technologies. Wood strand preforms bonded with 1%, 5%, and 20% by weight low-density polyethylene and 1% by weight high-density polyethylene were impregnated with resin during the molding process and compared. The results showed that 1% low-density polyethylene is sufficient to bind wood strands into a stable preform for handling and processing. Permeability measurements using a volumetric interpretation of Darcy’s law accounted for

APA, Harvard, Vancouver, ISO, and other styles

23

SHIMADA, Yasuhiro, Ryosuke MATSUZAKI, and Akiyuki TAKAHASHI. "Numerical Simulation of Molding-Defect Formation during Resin Transfer Molding." Journal of the Japan Society for Composite Materials 41, no. 5 (2015): 176–84. http://dx.doi.org/10.6089/jscm.41.176.

Full text

APA, Harvard, Vancouver, ISO, and other styles

24

Shimada, Yasuhiro, Ryosuke Matsuzaki, and Akiyuki Takahashi. "Numerical simulation of molding-defect formation during resin transfer molding." Advanced Composite Materials 25, sup1 (2016): 17–32. http://dx.doi.org/10.1080/09243046.2016.1181417.

Full text

APA, Harvard, Vancouver, ISO, and other styles

25

Rubino, Felice, and Pierpaolo Carlone. "A Semi-Analytical Model to Predict Infusion Time and Reinforcement Thickness in VARTM and SCRIMP Processes." Polymers 11, no. 1 (2018): 20. http://dx.doi.org/10.3390/polym11010020.

Full text

Abstract:

In liquid composite molding processes, such as resin transfer molding (RTM) and vacuum assisted resin transfer molding (VARTM), the resin is drawn through fiber preforms in a closed mold by an induced pressure gradient. Unlike the RTM, where a rigid mold is employed, in VARTM, a flexible bag is commonly used as the upper-half mold. In this case, fabric deformation can take place during the impregnation process as the resin pressure inside the preform changes, resulting in continuous variations of reinforcement thickness, porosity, and permeability. The proper approach to simulate the resin flo

APA, Harvard, Vancouver, ISO, and other styles

26

Li, Weidong, Zhengzheng Ma, Pengfei Shen, et al. "Preparation and Validation of a Longitudinally and Transversely Stiffened Panel Based on Hybrid RTM Composite Materials." Materials 16, no. 14 (2023): 5156. http://dx.doi.org/10.3390/ma16145156.

Full text

Abstract:

In the face of the difficulty in achieving high-quality integrated molding of longitudinally and transversely stiffened panels for helicopters by resin-matrix composite materials, we combine the prepreg process and the resin transfer molding (RTM) process to propose a hybrid resin transfer molding (HRTM) for composite stiffened panel structures. The HRTM process uses a mixture of prepreg and dry fabric to lay up a hybrid fiber preform, and involves injecting liquid resin technology. Using this process, a longitudinally and transversely stiffened panel structure is prepared, and the failure mod

APA, Harvard, Vancouver, ISO, and other styles

27

Ouezgan, Ahmed, Said Adima, Aziz Maziri, El Hassan Mallil, and Jamal Echaabi. "Relaxation-Compression Resin Transfer Molding under Magnetic Field." Key Engineering Materials 847 (June 2020): 81–86. http://dx.doi.org/10.4028/www.scientific.net/kem.847.81.

Full text

Abstract:

Relaxation-compression resin transfer molding under magnetic field is a new variant of VARTM (“vacuum assisted resin transfer molding”) process, which uses a flexible magnetic membrane controlled by a magnetic force, in order to govern the relaxation and compression phases by changing the permeability of the fabric preform. Thus permits to the resin to enter easily into the mold and to increase the resin impregnation velocity and the fiber volume fraction. This innovation is based on the application of the TRIZ theory (“the theory of inventive problem solving”), which allows us to answer to th

APA, Harvard, Vancouver, ISO, and other styles

28

Hori, Masayoshi, Takayuki Nomura, Masaharu Shimakura, Shuichi Takashima, and Eiji Masumoto. "Refinement of resin transfer molding (RTM) method." Advanced Composite Materials 6, no. 3 (1997): 255–59. http://dx.doi.org/10.1163/156855197x00120.

Full text

APA, Harvard, Vancouver, ISO, and other styles

29

Soukane, S., and F. Trochu. "New Remeshing Applications in Resin Transfer Molding." Journal of Reinforced Plastics and Composites 24, no. 15 (2005): 1629–53. http://dx.doi.org/10.1177/0731684405050404.

Full text

APA, Harvard, Vancouver, ISO, and other styles

30

Hillermeier, R. W., and J. C. Seferis. "Interlayer toughening of resin transfer molding composites." Composites Part A: Applied Science and Manufacturing 32, no. 5 (2001): 721–29. http://dx.doi.org/10.1016/s1359-835x(00)00088-9.

Full text

APA, Harvard, Vancouver, ISO, and other styles

31

Bhat, Prabhas, Justin Merotte, Pavel Simacek, and Suresh G. Advani. "Process analysis of compression resin transfer molding." Composites Part A: Applied Science and Manufacturing 40, no. 4 (2009): 431–41. http://dx.doi.org/10.1016/j.compositesa.2009.01.006.

Full text

APA, Harvard, Vancouver, ISO, and other styles

32

Hayajneh, Mohammed T. "SANDWICH STRUCTURE DELAMINATION OF RESIN TRANSFER MOLDING." Materials and Manufacturing Processes 16, no. 1 (2001): 27–45. http://dx.doi.org/10.1081/amp-100103695.

Full text

APA, Harvard, Vancouver, ISO, and other styles

33

Aboulaich, Rajae, Soumaya Boujena, and Jérôme Pousin. "A mathematical model for resin transfer molding." Annales mathématiques Blaise Pascal 8, no. 2 (2001): 115–36. http://dx.doi.org/10.5802/ambp.146.

Full text

APA, Harvard, Vancouver, ISO, and other styles

34

Shields, K., and J. Colton. "Resin transfer molding with powder-coated preforms." Polymer Composites 14, no. 4 (1993): 341–48. http://dx.doi.org/10.1002/pc.750140410.

Full text

APA, Harvard, Vancouver, ISO, and other styles

35

Besson, O., and J. Pousin. "Hele-Shaw approximation for resin transfer molding." ZAMM 85, no. 4 (2005): 227–41. http://dx.doi.org/10.1002/zamm.200110174.

Full text

APA, Harvard, Vancouver, ISO, and other styles

36

Colton, Jonathan S. "Resin transfer molding of BMIs and polymides." Polymer Composites 19, no. 6 (1998): 732–37. http://dx.doi.org/10.1002/pc.10147.

Full text

APA, Harvard, Vancouver, ISO, and other styles

37

Kang, Moon Koo, and Woo Il Lee. "Analysis of resin transfer/compression molding process." Polymer Composites 20, no. 2 (1999): 293–304. http://dx.doi.org/10.1002/pc.10356.

Full text

APA, Harvard, Vancouver, ISO, and other styles

38

Calhoun, Daryl R., Selim Yalvaç, Derrick G. Wetters, et al. "Mold filling analysis in resin transfer molding." Polymer Composites 17, no. 2 (1996): 251–64. http://dx.doi.org/10.1002/pc.10610.

Full text

APA, Harvard, Vancouver, ISO, and other styles

39

Kulkarni, Venkatesh M., Chu Wee Liang, C. W. Tan, P. A. Aswatha Narayana, and K. N. Seetharamu. "Simulation of Mold Filling for Non-Newtonian Fluids - Part 2." Journal of Microelectronics and Electronic Packaging 3, no. 2 (2006): 52–60. http://dx.doi.org/10.4071/1551-4897-3.2.52.

Full text

Abstract:

This paper deals with the flow in the resin transfer molding process commonly used for IC chip encapsulation in the electronic packaging industry. A solution algorithm is presented for modeling the flow of a non-Newtonian fluid obeying a Power-Law model and the algorithm is used to conduct parametric studies in transfer molding. The flow model uses the Hele-Shaw approximation to solve the Navier-Stokes Equations and a pseudo-concentration algorithm for tracking the interface between the resin and the air. The Finite Element Method is employed to reduce the governing partial differential equati

APA, Harvard, Vancouver, ISO, and other styles

40

Um, Moon-Kwang, Joon-Hyung Byun, and Isaac M. Daniel. "Similarity Relations of Resin Flow in Resin Transfer Molding Process." Advanced Composite Materials 18, no. 2 (2009): 135–52. http://dx.doi.org/10.1163/156855109x428745.

Full text

APA, Harvard, Vancouver, ISO, and other styles

41

TAGA, Kenji. "1323 Resin Flow Simulation under Vacuum assisted Resin Transfer Molding." Proceedings of Conference of Kansai Branch 2007.82 (2007): _13–23_. http://dx.doi.org/10.1299/jsmekansai.2007.82._13-23_.

Full text

APA, Harvard, Vancouver, ISO, and other styles

42

Shipeng Li and Raymond Gauvin. "Numerical Analysis of the Resin Flow in Resin Transfer Molding." Journal of Reinforced Plastics and Composites 10, no. 3 (1991): 314–27. http://dx.doi.org/10.1177/073168449101000306.

Full text

APA, Harvard, Vancouver, ISO, and other styles

43

Rau, A. V., S. A. Srinivasan, J. E. McGrath, and A. C. Loos. "Resin transfer molding (RTM) with toughened cyanate ester resin systems." Polymer Composites 19, no. 2 (1998): 166–79. http://dx.doi.org/10.1002/pc.10088.

Full text

APA, Harvard, Vancouver, ISO, and other styles

44

Song, Young Seok, and Jae Ryoun Youn. "Modeling of resin infusion in vacuum assisted resin transfer molding." Polymer Composites 29, no. 4 (2008): 390–95. http://dx.doi.org/10.1002/pc.20326.

Full text

APA, Harvard, Vancouver, ISO, and other styles

45

do Nascimento Santos, M. J., and A. G. Barbosa de Lima. "Manufacturing Fiber-Reinforced Polymer Composite Using RTM Process: An Analytical Approach." Defect and Diffusion Forum 380 (November 2017): 60–65. http://dx.doi.org/10.4028/www.scientific.net/ddf.380.60.

Full text

Abstract:

The Resin Transfer Molding process (RTM) has been widely used for manufacturing of high performance components in aerospace and automotive industries. It is an economical and faster method when compared to open molding process because it allows the molding of complex parts with constant thickness, dimensional precision, good surface finishing and an excellent control of mechanical properties. In this sense, this work aims to study theoretically the manufacture process of polymeric composites reinforced with fibers via resin transfer molding. The governing equations of conservation of mass and

APA, Harvard, Vancouver, ISO, and other styles

46

de Oliveira, Iran Rodrigues, Sandro Campos Amico, F. Ferreira Luz, R. Barcella, V. M. França Bezerra, and Antônio Gilson Barbosa de Lima. "Effect of CaCO₃Content in Resin Transfer Molding Process." Defect and Diffusion Forum 334-335 (February 2013): 188–92. http://dx.doi.org/10.4028/www.scientific.net/ddf.334-335.188.

Full text

Abstract:

Composite material can be defined as a combination of two or more materials on a macroscale to form a useful material, often showing properties that none of the individual independent components shows. Resin Transfer Molding (RTM) is one of the most widely known composite manufacturing technique of the liquid molding family, being extensively studied and used to obtain advanced composite materials comprised of fibers embedded in a thermoset polymer matrix. This technique consists in injecting a resin pre-catalysed thermosetting in a closed mold containing a dry fiber preform, where the resin i

APA, Harvard, Vancouver, ISO, and other styles

47

de Oliveira, Iran Rodrigues, Sandro Campos Amico, R. Barcella, and Antônio Gilson Barbosa de Lima. "Application of Calcium Carbonate in Resin Transfer Molding Process." Defect and Diffusion Forum 353 (May 2014): 39–43. http://dx.doi.org/10.4028/www.scientific.net/ddf.353.39.

Full text

Abstract:

Resin Transfer Molding (RTM) is one of the most widely known composite manufacturing techniques of the liquid molding family, being extensively studied and used to obtain advanced composite materials comprised of fibers embedded in a thermoset polymer matrix. Nowadays, RTM is used by many industrial sectors such as automotive, aerospace, civil and sporting equipment. Therefore, the objective of this study is to verify the effect of calcium carbonate mixed in resin in the RTM process. Several rectilinear infiltration experiments were conducted using glass fiber mat molded in a RTM system with c

APA, Harvard, Vancouver, ISO, and other styles

48

Kim, Kim, Hwang, and Kim. "Embedded Based Real-Time Monitoring in the High-Pressure Resin Transfer Molding Process for CFRP." Applied Sciences 9, no. 9 (2019): 1795. http://dx.doi.org/10.3390/app9091795.

Full text

Abstract:

Carbon Fiber Reinforced Plastics (CFRP) is a material developed for its high strength and light weight in a broad variety of industries including aerospace, automotive, and leisure. Due to the rapid molding cycle time, high-pressure resin transfer molding (HP-RTM) processes are prone to molding defects and susceptible to various process variables such as the resin injection rate, pressure and temperature in the mold, vacuum, end-gap, pressing force, and binder. In recent years, process monitoring technology with various sensors has been applied to stabilize the HP-RTM process and control proce

APA, Harvard, Vancouver, ISO, and other styles

49

Sato, Mio, Yuki Kataoka, Masumi Higashide, Yuichi Ishida, and Sunao Sugimoto. "Evaluation of the Mechanical Properties of Highly Oriented Recycled Carbon Fiber Composites Using the Vacuum-Assisted Resin Transfer Molding, Wet-Layup, and Resin Transfer Molding Methods." Polymers 17, no. 10 (2025): 1293. https://doi.org/10.3390/polym17101293.

Full text

Abstract:

Recycling carbon-fiber-reinforced plastics (CFRPs) is crucial for sustainable material utilization, particularly in aerospace applications, where large quantities of prepreg waste are generated. This study investigated the mechanical properties of highly oriented recycled CFRP (rCFRP) molded using vacuum-assisted resin transfer molding (VaRTM), wet-layup, and traditional RTM methods. Recycled carbon fibers (rCFs) obtained via solvolysis and pyrolysis were processed into nonwoven preforms to ensure fiber alignment through carding. The influence of molding methods, fiber recycling techniques, an

APA, Harvard, Vancouver, ISO, and other styles

50

Sun, Zeyu, Jie Xiao, Lei Tao, et al. "Preparation of High-Performance Carbon Fiber-Reinforced Epoxy Composites by Compression Resin Transfer Molding." Materials 12, no. 1 (2018): 13. http://dx.doi.org/10.3390/ma12010013.

Full text

Abstract:

To satisfy the light weight requirements of vehicles owing to the aggravation of environmental pollution, carbon-fiber (CF)-reinforced epoxy composites have been chosen as a substitute for traditional metal counterparts. Since the current processing methods such as resin transfer molding (RTM) and compression molding (CM) have many limitations, an integrated and optimal molding method needs to be developed. Herein, we prepared high-performance composites by an optimized molding method, namely compression resin transfer molding (CRTM), which combines the traditional RTM and CM selectively and c

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!