Academic literature on the topic 'Revize parní turbíny'

The theme of this master thesis is the revision and repair design of the condensing steam turbine SST 600 in Bielsko-Biala. The thesis deals with the revision of the steam turbine and the repair design of the damaged parts, the overall analysis of the separation of the steam of the split plane and the calculation of the parameters for tightening the new screws. The master thesis is given for a specific case. The introductory part of the master thesis deals with a basic description of the repaired steam turbine. Subsequently, a review of individual disassembled parts is given and the scope of the repairs is stated. In the next part of this thesis are summarized the causes of the steam leakage of the dividing plane at the points of the cross section and in the area of the control stage. The last part deals with the sealing problem of the split plane and the related main part of the master thesis is the calculation of the tightening parameters of bolts in the turbine housing. Another aim of the master thesis is to create drawings of the lightening of the split plane on turbine house.

The aim of this master thesis is the retrofit of a condensing steam turbine. The thesis obtains a revision of the steam turbine, the reconstruction of steam turbine blades and the basic calculation of bolt torques of the turbine split plane. The master thesis is assigned to a specific retrofit of the steam turbine Lang. In the introductory part the thesis is focused on the turbine description and the basic functions of selected turbine components. The following part deals with the revision and the proposal of repairs for all components and the recommendation of additional modernizations of specific measuring equipments. The analysis of anchoring the stator and rotor blading and their reconstruction is discussed in the next part. In the last part the thesis focuses on the sealing of the turbine split plane and the calculation of the various bolt torques closely linked to the sealing.

Tématem diplomové práce je revize parní turbíny Mitsubishi a výpočet utahovacích momentů šroubů dělící roviny. Tato práce je rozdělena do několika částí. Úvodní část práce obsahuje seznámení s rozsahem prováděných servisních prací na parních turbínách. Poté je zde samotná revize parní turbíny Mitsubishi. Tato revize je dělena podle jednotlivých komponent turbíny. Poté je zde stanoven seznam nutných oprav a také seznam doporučených oprav pro příští odstávku. V další části je zde shrnut výpočet utěsnění dělicích rovin a to s nebo bez odlehčení. Dále jsou rozebrány nejčastěji používané typy závitů spojovacího materiálu parních turbín. Hlavní částí práce je samotný výpočet utahovacího momentu. Výstupem této práce je poté program pro výpočet utahovacího momentu v programu Excel.

This work deals with current application of the developing field of post-warranty service of old turbines in the energy sector. There are described various types of repairs following the recommendations of commonly performed actions. Revision finding is focused on back-pressure steam turbine marked R12-9 / 2, which was scheduled for overhaul after 180 000 operating hours. Revision findings include a detailed description of the turbine and method of repair. It is also performed calculating the losses in the axial blade stage of cascade by AMDC-KO methodology on because of the choice type of blading and then comparing by technical justification for the choice of one of the variants for the customer.

The content of this diploma thesis is proposal of repair, reconstruction of equipment and installation of electrohydraulic regulation of steam turbine. Thesis is given for specific case. At the beginning there is a basic description of repairing turbine. The next part of thesis deals with checking of main turbine parts and recalculation of gland steam. In the following part there is revisional report with repair or exchange suggestions of demaged turbine parts, followed by description of turbine regulation reconstruction. The last part deals with economical evaluation used innovation and recommendations for repairment procedure.

This diploma thesis deals with the repair of a steam backpressure single-stage turbine. This thesis is assigned to a specific Spilling turbine case. A revisional report of this turbine with repair or exchange suggestions of demaged turbine parts is processed. In addition, a simulation of the contact pressure is carried out on the split plane of the housing. Structural modifications are designed and simulated to increase the parting plane's tightness. Further, the calculation of the tightening torque of the split plane is performed and a control thermodynamic and strength calculation of the labyrinth seals is performed.