Academic literature on the topic 'RF choke'
Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles
Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'RF choke.'
Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.
You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.
Journal articles on the topic "RF choke"
Kavlak, Canan, Yasar Gurbuz, and Ibrahim Tekin. "A coplanar waveguide on-chip RF choke for WLAN RF circuits." Microwave and Optical Technology Letters 49, no. 10 (July 27, 2007): 2530–34. http://dx.doi.org/10.1002/mop.22725.
Full textSingh, Gagan Deep, and Nagarjuna Nallam. "An RF Choke-Less Class E Power Amplifier." IEEE Transactions on Circuits and Systems II: Express Briefs 67, no. 11 (November 2020): 2422–26. http://dx.doi.org/10.1109/tcsii.2020.2966552.
Full textHarrison, William H., Mitsuaki Arakawa, and Barry McCarten. "4682125 RF coil coupling for MRI with tuned RF rejection circuit using coax shield choke." Magnetic Resonance Imaging 6, no. 3 (May 1988): III. http://dx.doi.org/10.1016/0730-725x(88)90424-9.
Full textIwadare, Minoru, Shinsaku Mori, and Kazunaga Ikeda. "Even harmonic resonant class E tuned power amplifier without RF choke." Electronics and Communications in Japan (Part I: Communications) 79, no. 1 (1996): 23–30. http://dx.doi.org/10.1002/ecja.4410790103.
Full textAlbulet, M. "Analysis and design of the Class E frequency multipliers with RF choke." IEEE Transactions on Circuits and Systems I: Fundamental Theory and Applications 42, no. 2 (1995): 95–104. http://dx.doi.org/10.1109/81.372849.
Full textLewis, Samantha M., Emilio A. Nanni, and Richard J. Temkin. "Direct Machining of Low-Loss THz Waveguide Components With an RF Choke." IEEE Microwave and Wireless Components Letters 24, no. 12 (December 2014): 842–44. http://dx.doi.org/10.1109/lmwc.2014.2303161.
Full textKobayashi, Noriyuki, Haruyuki Kimura, Mikio Saigusa, Tsuneyuki Fujii, Yoshitaka Ikeda, and Yasushi Saitoh. "Plunger design and rf leakage measurement of choke stub for JT-60 ICRF heating system." Fusion Engineering and Design 12, no. 4 (July 1990): 481–91. http://dx.doi.org/10.1016/0920-3796(90)90041-4.
Full textMoumane, Ibtissame, Jamal Zbitou, M. Latrach, A. Errkik, and O. Chakkor. "A novel configuration of THz photonic transmitter." Indonesian Journal of Electrical Engineering and Computer Science 13, no. 1 (January 1, 2019): 258. http://dx.doi.org/10.11591/ijeecs.v13.i1.pp258-264.
Full textAli, Ahmed, Heesu Wang, Yeojun Yun, Jaejin Lee, and Ikmo Park. "Compact Slot Antenna Integrated with a Photovoltaic Cell." Journal of Electromagnetic Engineering and Science 20, no. 4 (October 31, 2020): 248–53. http://dx.doi.org/10.26866/jees.2020.20.4.248.
Full textGa, Deukhyeon, Youngki Lee, and Jaehoon Choi. "Design of a multi-input multi-output antenna with improved isolation using RF choke for long-term evolution mobile application." Microwave and Optical Technology Letters 55, no. 7 (April 26, 2013): 1569–74. http://dx.doi.org/10.1002/mop.27623.
Full textDissertations / Theses on the topic "RF choke"
Backström, Anders, and Mats Ågesjö. "Design and implementation of a 5GHz radio front-end module." Thesis, Linköping University, Department of Science and Technology, 2004. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-2635.
Full textThe overall goal of this diploma work is to produce a design of a 5 GHz radio frontend using Agilent Advanced Design System (ADS) and then build a working prototype. Using this prototype to determine if RF circuits at 5 GHz can be successfully produced using distributed components on a laminate substrate.
The design process for the radio front-end consists of two stages. In the first stage the distributed components are designed and simulated, and in the second stage all components are merged into a PCB. This PCB is then manufactured and assembled. All measurements on the radio front-end and the test components are made using a network analyser, in order to measure the S-parameters.
This diploma work has resulted in a functional design and prototype, which has proved that designing systems for 5 GHz on a laminate substrate is possible but by no means trivial.
Yang, Chih-Peng, and 楊志鵬. "Design of Dual-Band RF Choke for Active Mixer Application." Thesis, 2012. http://ndltd.ncl.edu.tw/handle/mwueqc.
Full text國立東華大學
電機工程學系
100
A dual-band RF choke for active mixer application is proposed in this thesis. The advantages of this mechanism include reducing the cost of circuit design effectively, saving area of circuit layout, improving the impedance matching, and restraining of signal attenuation. In general RF choke design, the common method is using a quarter wavelength micro-strip line and a series capacitor to ground. Therefore, the DC current is able to provide components with the DC bias but me to cause attenuation of the RF signal. Unfortunately, the single-frequency RF choke exist many defects in the application of single FET active mixer. The main reason is because that the output of active mixer has two different high frequency signals in the same time. The Ku band LNBF, for example, one of them is the IF signal (0.95 GHz – 2.15 GHz), another may be the LO signal (9.75 GHz, 10.60 GHz and so on...) or the RF signal (10.70 GHz – 12.75 GHz). At this time, the RF choke has to provide the required DC bias for the active mixer, in addition, but not to cause attenuation of the IF or RF signals. It is really difficult to achieve such a broadband RF choke (0.95 GHz – 12.75 GHz) by using the traditional design. In order to implement the effective dual-band RF choke to ensure that the IF and RF signals does not decay. In the first, this thesis analyzes the design of a RF choke with a quarter wavelength of the RF frequency. The observation indicates that the IF signal attenuation serious and the IF conversion gain is inadequate. And vise versa, the RF signal attenuation is serious and the IF conversion gain is inadequate with a quarter wavelength of the IF frequency. Confirmed that traditional methods can not effectively solve these problems, this study presents a new framework for a dual-band RF choke to guarantee that the IF and RF signals will not decay. The core idea of dual-band RF choke is combining the feature of non-ideal inductor self resonant frequency (SRF) and a quarter wavelength micro-strip line of the RF frequency. Experiment results are consistent with the goals of the proposed dual-band RF choke design. IF and RF signals does not cause attenuation and applies the application of the active mixer.
Conference papers on the topic "RF choke"
Yeh, Chin-I., Dong-Hua Yang, Yung-Nan Chen, Tsung-Han Liu, Jeffrey S. Fu, Hsien-Chin Chiu, and Hsuan-Ling Kao. "Dumbbell DGS based broadband RF choke for UWB LNA." In 2010 International Workshop on Electromagnetics; Applications and Student Innovation (iWEM). IEEE, 2010. http://dx.doi.org/10.1109/aem2c.2010.5578803.
Full textHongxi Xue. "A high performance ultra-broadband RF choke for microwave applications." In IEE Colloquium on Evolving Technologies for Small Earth Station Hardware. IEE, 1995. http://dx.doi.org/10.1049/ic:19950226.
Full textDaggula, Rajender, Madhumita Chakravarti, Amit Acharyya, Manisha Kamal Konda, and K. Samba Siva Rao. "Flange Effect Minimization and Antenna Isolation Improvement Using RF Choke in Slotted Waveguide Array Antenna." In 2019 IEEE MTT-S International Microwave and RF Conference (IMARC). IEEE, 2019. http://dx.doi.org/10.1109/imarc45935.2019.9118766.
Full textMiropolsky, Sergey, and Marlon Roebl. "Uncertainty of CAN RF Emission Test Results due to Common Mode Choke Asymmetry." In 2019 International Symposium on Electromagnetic Compatibility - EMC EUROPE. IEEE, 2019. http://dx.doi.org/10.1109/emceurope.2019.8872126.
Full textChoi, Woo Cheol, Seonho Lim, and Young Joong Yoon. "Design of compact RF choke for suppressing ground edge current in LTE mobile application." In 2015 IEEE International Symposium on Antennas and Propagation & USNC/URSI National Radio Science Meeting. IEEE, 2015. http://dx.doi.org/10.1109/aps.2015.7304578.
Full textLim, Seonho, Woo Cheol Choi, Young Joong Yoon, and Kenny Seungwoo Ryu. "Isolation technique using the A/4 Stub RF Choke for the mobile MIMO system." In 2015 International Workshop on Antenna Technology (iWAT). IEEE, 2015. http://dx.doi.org/10.1109/iwat.2015.7365362.
Full textJam, Armin, Jack East, and Kamal Sarabandi. "A micromachined packaging with incorporated RF-choke for integration of active chips at submillimeter-wave frequencies." In 2017 IEEE/MTT-S International Microwave Symposium - IMS 2017. IEEE, 2017. http://dx.doi.org/10.1109/mwsym.2017.8058610.
Full textSingh, Gagan Deep, and Nagarjuna Nallam. "A CMOS Inverter-Like Class-D/E Power Amplifier with No RF-Choke and No Dead-Time Requirement." In 2018 IEEE International Symposium on Circuits and Systems (ISCAS). IEEE, 2018. http://dx.doi.org/10.1109/iscas.2018.8351789.
Full textGuan, Junqing, and Renato Negra. "Steady-state analysis and fast optimisation of Class-E power amplifiers with lossy switch for RF choke and finite DC-feed inductance." In 2013 IEEE 56th International Midwest Symposium on Circuits and Systems (MWSCAS). IEEE, 2013. http://dx.doi.org/10.1109/mwscas.2013.6674665.
Full textChen, Peter S., Dae-Hyun Kim, Joshua Bergman, Jonathan Hacker, and Berinder Brar. "Wideband Low-Noise-Amplifier (LNA) with Lg = 50 nm InGaAs pHEMT and wideband RF chokes." In 2011 IEEE/MTT-S International Microwave Symposium - MTT 2011. IEEE, 2011. http://dx.doi.org/10.1109/mwsym.2011.5972958.
Full textReports on the topic "RF choke"
Yeremian, A. Dian. Choke Flange for High Power RF Components Excited by TE01 Mode. Office of Scientific and Technical Information (OSTI), December 2009. http://dx.doi.org/10.2172/969245.
Full text