Log in

Relevant bibliographies by topics / RF Energy Harvesting

Contents

Journal articles
Dissertations / Theses
Books
Book chapters
Conference papers

Academic literature on the topic 'RF Energy Harvesting'

Author: Grafiati

Published: 4 June 2021

Last updated: 1 June 2024

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'RF Energy Harvesting.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "RF Energy Harvesting"

1

Patel, Deep, Rohan Mehta, Rhythm Patwa, Sahil Thapar, and Shivani Chopra. "RF Energy Harvesting." International Journal of Engineering Trends and Technology 16, no. 8 (October 25, 2014): 382–85. http://dx.doi.org/10.14445/22315381/ijett-v16p276.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Szut, Jakub, Paweł Piątek, and Mariusz Pauluk. "RF Energy Harvesting." Energies 17, no. 5 (March 3, 2024): 1204. http://dx.doi.org/10.3390/en17051204.

Full text

Abstract:

This article presents research on the usefulness of three different electric circuit simulation environments for exploring energy harvesting from electromagnetic waves using energy harvesters. The software that is compared includes KiCad EDA, LT Spice and MATLAB Simscape Electrical.Too prepare a common background for the results comparison, crucial equations that combine RF transmission with energy are presented. Commercially available harvesters are also presented. An overview of the state-of-the-art research on this topic is summarised. In order to verify software using conditions that are similar to real ones, the power available at the 868 MHZ ISM band, which is close to the LTE bands used for telecommunications, is calculated. The results obtained using different software are close to being identical for all tested simulation environments.

APA, Harvard, Vancouver, ISO, and other styles

3

Bouchouicha, D., F. Dupont, M. Latrach, and L. Ventura. "Ambient RF Energy Harvesting." Renewable Energy and Power Quality Journal 1, no. 08 (April 2010): 1309–13. http://dx.doi.org/10.24084/repqj08.652.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Popovic, Zoya, Sean Korhummel, Steven Dunbar, Robert Scheeler, Arseny Dolgov, Regan Zane, Erez Falkenstein, and Joseph Hagerty. "Scalable RF Energy Harvesting." IEEE Transactions on Microwave Theory and Techniques 62, no. 4 (April 2014): 1046–56. http://dx.doi.org/10.1109/tmtt.2014.2300840.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

S, Kumaravel, Mohamed Thufail H, Manoj Kumar R, Karunyamani V, and Mukesh Kumar M.K. "Energy Harvesting and Management from Ambient RF Radiation." SIJ Transactions on Computer Networks & Communication Engineering 05, no. 02 (April 18, 2017): 05–08. http://dx.doi.org/10.9756/sijcnce/v5i2/05010030101.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Kwiatkowski, Eric, Jose Antonio Estrada, Ana Lopez-Yela, and Zoya Popovic. "Broadband RF Energy-Harvesting Arrays." Proceedings of the IEEE 110, no. 1 (January 2022): 74–88. http://dx.doi.org/10.1109/jproc.2021.3134658.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Rengalakshmi, P., and R. Brinda. "Rectifier for RF Energy Harvesting." International Journal of Computer Applications 143, no. 10 (June 17, 2016): 14–17. http://dx.doi.org/10.5120/ijca2016910365.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Oliveira, Daniela, and Rodolfo Oliveira. "Characterization of Energy Availability in RF Energy Harvesting Networks." Mathematical Problems in Engineering 2016 (2016): 1–9. http://dx.doi.org/10.1155/2016/7849175.

Full text

Abstract:

The multiple nodes forming a Radio Frequency (RF) Energy Harvesting Network (RF-EHN) have the capability of converting received electromagnetic RF signals in energy that can be used to power a network device (the energy harvester). Traditionally the RF signals are provided by high power transmitters (e.g., base stations) operating in the neighborhood of the harvesters. Admitting that the transmitters are spatially distributed according to a spatial Poisson process, we start by characterizing the distribution of the RF power received by an energy harvester node. Considering Gamma shadowing and Rayleigh fading, we show that the received RF power can be approximated by the sum of multiple Gamma distributions with different scale and shape parameters. Using the distribution of the received RF power, we derive the probability of a node having enough energy to transmit a packet after a given amount of charging time. The RF power distribution and the probability of a harvester having enough energy to transmit a packet are validated through simulation. The numerical results obtained with the proposed analysis are close to the ones obtained through simulation, which confirms the accuracy of the proposed analysis.

APA, Harvard, Vancouver, ISO, and other styles

9

Guo, Jing, Dongkun Lu, and Weige Zheng. "Experimental Study on the Efficiency of RF Energy Transfer System." Journal of Physics: Conference Series 2221, no. 1 (May 1, 2022): 012039. http://dx.doi.org/10.1088/1742-6596/2221/1/012039.

Full text

Abstract:

Abstract This paper presents a 915 MHz radio frequency (RF) wireless energy transfer system which contains RF energy transmitters and RF energy harvesting nodes. Firstly, Advanced Design System (ADS) is used to design and optimize the monopole voltage doubler rectifier circuit. Secondly, an energy harvesting node is designed by a commercial RF/DC rectifier and a 915 MHz antenna. Finally, the RF energy transfer experiment between RF energy transmitter and RF energy harvesting node is demonstrated. Experimental data fits well with theoretical analysis and the harvested energy show a non-linear relationship with the distance and angle between the receiving node antenna and the transmitter antenna. The experimental data is valuable for designing RF-powered nodes and optimizing the movement trajectory of the mobile RF energy transmitter, such as an unmanned aerial vehicle (UAV).

APA, Harvard, Vancouver, ISO, and other styles

10

Purohit, Nikhil, and Imaculate Rosaline. "Novel RF energy harvesting using Rectenna." Journal of Physics: Conference Series 2070, no. 1 (November 1, 2021): 012112. http://dx.doi.org/10.1088/1742-6596/2070/1/012112.

Full text

Abstract:

Abstract In this paper an experimental RF energy harvester using rectifying antenna (rectenna) to harvest ambient energy from cellular device operating at 900 MHz GSM band is proposed. The circuit is a combination of antenna and rectifying circuit using Schottky barrier diode for microwave (RF) to DC conversion. The performance results of the rectenna shows radiation efficiency of around 58.81%, gain of 3.9 dB and directivity of 5.972 dBi. The proposed rectenna design can prove to be a low cost device for wireless power transmission and RF energy harvesting. The prototype is fabricated with simulated and measured results in good agreement, having a return loss of 21 dB at frequency of around 885 MHz. The overall efficiency is enhanced by using ISS351-TB-E Schottky diode which is categorized by a low junction capacitance and a low threshold voltage to achieve higher conversion efficiency.

APA, Harvard, Vancouver, ISO, and other styles

More sources

Dissertations / Theses on the topic "RF Energy Harvesting"

1

Mattsson, Martin. "Differential Patch Antennafor RF Energy Harvesting." Thesis, KTH, Skolan för elektro- och systemteknik (EES), 2016. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-200644.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Zhang, Jingwei. "Rectennas for RF wireless energy harvesting." Thesis, University of Liverpool, 2013. http://livrepository.liverpool.ac.uk/18537/.

Full text

Abstract:

There is an increasing interest in energy harvesting. The rectenna, which is a combination of a rectifier and an antenna, is a device to harvest wireless energy in the air. This thesis is concentrated on the analysis, design and measurement of compact rectennas for radio frequency (RF) wireless energy harvesting applications, and the thesis can be divided into three parts. The first part is about broadband planar dipole antennas with an unidirectional radiation pattern which is suitable for wireless energy harvesting applications. With the rapid development of various wireless systems, there is a need to have a broadband rectenna for energy collection. The antenna is optimized by changing the dipole shape, diameter, feed gap and the spacing between the antenna and the ground plane. It is shown the optimized antenna has a broad (from 2.8 to at least 12 GHz) with the ability to produce unidirectional radiation pattern. It is a good candidate to form a wideband dual-polarized antenna array for applications such as the wireless power transmission and collection. In addition, a simple rectenna and duel-polarized rectenna arrays are presented. The measurement of the rectenna array is shown that the design has produced the desired DC power with reasonable efficiency. The study is confirmed that the more elements in the array, the higher output voltage although the bandwidth is not as wide as expected because of practical limits. The second part is about a novel wideband cross dipole rectenna for RF wireless energy harvesting. The proposed device consists of a cross dipole antenna, low-pass filter (LPF) and voltage doubling rectifier circuit using Shottcky diodes as rectifying elements. It works over the frequency range from 1.7 to 3 GHz for the reflection coefficient less than -10 dB. Besides, the proposed rectenna can convert the RF energy into DC energy with a good conversion efficiency of up to 75% for high input power density levels (>5 mW/cm^2). In addition, another wideband rectenna built on FR4 substrate is optimized for low input power and the rectenna is optimized, built and measured. A further investigation for the input impedance of rectifier is also conducted. Experimental results demonstrate the rectenna has wideband rectification performance and the maximum rectenna conversion efficiency at 1.7 GHz is more than 50% for the power density of 0.1 mW/cm^2. The third part is about improving rectenna conversion efficiency for low input power density. Increasing the rectenna conversion efficiency for low power density is significant for improving rectenna performance. Currently, there are few of research focused on wideband rectenna arrays for low input power. A new wideband rectenna array with a reflector is developed to increase the rectenna conversion efficiency and output voltage through increasing the gain of the antenna. In addition, two connection methods are used to build the rectenna array and advantages and disadvantages for each method are presented. The RF to DC conversion efficiency of proposed rectenna arrays is much improved for low input power density over a wide bandwidth. This research has produced some important designs and results for wireless energy harvesting, especially in wideband rectennas, and is a solid step towards possible widespread applications of rectennas in the near future.

APA, Harvard, Vancouver, ISO, and other styles

3

Sanden, Erlend. "RF Energy Harversting : Design and implementation of an RF energy harvesting system for SoC." Thesis, Mittuniversitetet, Institutionen för elektronikkonstruktion, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:miun:diva-37659.

Full text

Abstract:

This assignment was given by Nordic Semiconductor. In this project a radio frequency energy harvesting system able to harvest ambient power at 900 MHz (GSM) was simulated and designed. A Villard voltage multiplier, boost converter and power management circuit was implemented for the harvesting system. The intention was to implement a system which would give sufficient output power and voltage to supply a load (nRF52810) at all times. The nRF52810 is a power efficient multi protocol SoC made by Nordic Semiconductor. Since the power harvested by the antenna is of AC power, a recti er was needed. A Villard voltage multiplier was proposed as the most suitable application. It not only recti es the voltage, but the voltage doubles for every stage. A 2-stage Villard voltage multiplier was proposed with the advantage that in theory the output voltage should be four times higher in magnitude than the input voltage. There exists several other ways to boost a voltage, a voltage boost converter was combined with the Villard Voltage multiplier. According to calculations the boost converter should boost the voltage up to 2.3 V. Since the assumed power from the harvesting system may be lower than the power consumed by the load, a power managing circuit was also needed, which would avoid the load to drain the current from the storage element before the voltage level was sufficient. Different solutions for a power management circuit was proposed using different variations of MOSFETs. A real-life design was implemented, but the Villard voltage multiplier gave out a much lower e efficiency than expected from simulations. The output power of the VVM was too low to supply the load (nRF52810).

APA, Harvard, Vancouver, ISO, and other styles

4

Chaour, Issam, Ahmed Fakhfakh, and Olfa Kanoun. "Enhanced Passive RF-DC Converter Circuit Efficiency for Low RF Energy Harvesting." Universitätsbibliothek Chemnitz, 2017. http://nbn-resolving.de/urn:nbn:de:bsz:ch1-qucosa-224264.

Full text

Abstract:

For radio frequency energy transmission, the conversion efficiency of the receiver is decisive not only for reducing sending power, but also for enabling energy transmission over long and variable distances. In this contribution, we present a passive RF-DC converter for energy harvesting at ultra-low input power at 868 MHz. The novel converter consists of a reactive matching circuit and a combined voltage multiplier and rectifier. The stored energy in the input inductor and capacitance, during the negative wave, is conveyed to the output capacitance during the positive one. Although Dickson and Villard topologies have principally comparable efficiency for multi-stage voltage multipliers, the Dickson topology reaches a better efficiency within the novel ultra-low input power converter concept. At the output stage, a low-pass filter is introduced to reduce ripple at high frequencies in order to realize a stable DC signal. The proposed rectifier enables harvesting energy at even a low input power from −40 dBm for a resistive load of 50 kΩ. It realizes a significant improvement in comparison with state of the art solutions

APA, Harvard, Vancouver, ISO, and other styles

5

Khoury, Philip. "A Power-efficient Radio Frequency Energy-harvesting Circuit." Thèse, Université d'Ottawa / University of Ottawa, 2013. http://hdl.handle.net/10393/23627.

Full text

Abstract:

This work aims to demonstrate the design and simulation of a Radio Frequency (RF) energy-harvesting circuit, from receiving antenna to the point of charge collection. The circuit employs a custom-designed antenna based around Koch fractal loops, selected for their small physical size, good multiband behaviour and ease of size scalability, as well as a power-efficient seven-element Greinacher rectification section designed to charge a super-capacitor or rechargeable battery for later use. Multiple frequency bands are tapped for energy and this aspect of the implementation was one on the main focus points. The bands targeted for harvesting in this thesis will be those that are the most readily available to the general Canadian population. These include Wi-Fi hotspots (and other 2.4GHz sources), as well as cellular (850MHz band), Personal Communications Services (1900MHz band) and WiMax (2.3GHz) network transmitters.

APA, Harvard, Vancouver, ISO, and other styles

6

Efthymakis, Panagiotis. "A RECTENNA FOR 5G ENERGY HARVESTING." VCU Scholars Compass, 2018. https://scholarscompass.vcu.edu/etd/5485.

Full text

Abstract:

This thesis describes the design of a rectenna that is capable of operating in 5G. 5G’s availability will create the opportunity to harvest energy everywhere in the network’s coverage. This thesis investigates a Rectenna device with a new proposed topology in order to eliminate coupling between input and output lines and increase the rectification efficiency. Moreover, it is designed to charge a rechargeable battery of 3V, 1mA, with a 4.8mm diameter. The current design describes using one antenna for energy harvesting; this could be expanded to use an antenna array, which would increase the input power. This would lead to higher output currents, leading to the ability to efficiently charge a wide variety of batteries. Because of its small size, the rectenna could be used for the remote charging of an implantable sensor battery or for other applications where miniaturization is a design consideration.

APA, Harvard, Vancouver, ISO, and other styles

7

Fowler, Clayton M. "Application of Metamaterials to RF Energy Harvesting and Infrared Photodetection." Scholar Commons, 2017. http://scholarcommons.usf.edu/etd/7024.

Full text

Abstract:

Techniques for adapting metamaterials for the improvement of RF energy harvesting and infrared photodetection are demonstrated using experimental and computer simulation methods. Two methods for RF energy harvesting are experimentally demonstrated and supported by computer simulation. In the first method, a metamaterial perfect absorber (MPA) is made into a rectenna capable of harvesting RF energy and delivering power to a load by soldering Schottky diodes onto connected split ring resonator (SRR) structures composing the planar metasurface of the perfect absorber. The metamaterial rectenna is accompanied by a ground plane placed parallel to it, which forms a Fabry-Perot cavity between the metasurface and the ground plane. The Fabry-Perot cavity stores energy in the form of standing waves which is transferred to the SRR structures of the metasurface as AC currents that are rectified by the diodes to create DC power. This type of design enables highly efficient energy harvesting for low input power, creates a large antenna capture area, and uses elements with small electrical size, such that 100 uW of power (enough to operate simple devices) can be captured at ambient intensities ~ 1 - 2 uW/cm2. Two designs using this method are presented, one that operates for linear polarizations at 0.9 GHz and a smaller polarization-independent design that operates around 1.5 GHz. In the second method, the energy stored in the standing waves of an MPA Fabry-Perot cavity is instead harvested by placing a separate energy harvesting antenna within the cavity. The cavity shapes and enhances the incident electric field, and then the separate energy harvesting antenna is designed to be inserted into the cavity so that its shape and/or radiation pattern matches the electric field lines within the cavity and maximally extracts the stored energy. This method allows for great customization of antenna design parameters, such as operating frequency, polarization dependence, and directionality, by swapping out different metasurface and antenna designs. Using this method, the amount of power harvested by a simple dipole rectenna placed within a cavity is improved by a factor of 18 as compared to what it would harvest by itself at an ambient intensity of 35 nW/cm2. Lastly, the addition of plasmonic structures to DWELL (quantum dot-in-a-well) infrared photodetectors is investigated by computer simulation. DWELL photodetectors have the potential to one day replace standard mercury cadmium telluride detectors by being cheaper alternatives with a higher operating temperature. The inclusion of gold plasmonic structure arrays into DWELL detectors enables excitation of surface plasmon polariton modes that increase the responsivity of the detector to incident infrared radiation. The peak responsivity of a DWELL detector is demonstrated to improve by a factor of 8 for a 1 um thick layer of plasmonic structures and by a factor of 15 for a 2 um thick layer. These works are steps forward in making RF energy harvesting practically useful and for improving infrared photodetector performance.

APA, Harvard, Vancouver, ISO, and other styles

8

Elmorshedy, Lina. "RF energy harvesting in a decode-and-forward wireless relay network." Thesis, University of British Columbia, 2016. http://hdl.handle.net/2429/57607.

Full text

Abstract:

Wireless communication has experienced tremendous growth over the past three decades. This led to the development of many novel technologies aimed at enhancing the system performance due to the limited availability of radio resources. Cooperative relaying is a promising technology which enhances transmission reliability using simple hardware. However, the extra power consumed for the process of information relaying may be an issue. Recent advances in wireless energy transfer have made it possible for self-sustainable relays that power themselves by capturing ambient energy wirelessly. In this thesis we focus on two technologies, namely, cooperative relaying which enhances the energy efficiency and reliability by allowing multi-hop communication with low power nodes, and Radio Frequency (RF) energy harvesting which obviates the need for a battery by capturing the ambient RF energy and using it as a source power. In the first part of the thesis, we study RF energy harvesting in a Decode-and-Forward (DF) Wireless Relay Network (WRN) in the presence of an interferer node. We consider the Time Switching Relaying (TSR) protocol, the Power Splitting Relaying (PSR) protocol and we propose a new hybrid TSR-PSR protocol. We derive expressions for the outage probability and throughput in the delay-sensitive transmission mode for the three relaying protocols, and compare their performances. For simplicity, we neglect the energy harvested from the interferer signal. In the second part, we study the general case in which we include the effect of harvesting energy from the interferer signal. Expressions for the outage probability and throughput in the delay-sensitive transmission mode are derived for the three relaying protocols. Numerical results are presented to illustrate the effect of including RF energy harvesting from the interferer. In the third part, we study shared and non-shared power allocation schemes for a two-hop DF WRN with multiple source-destination pairs. The pairs communicate via a single relay which harvests RF energy from the source transmissions in the presence of an interfering signal. The studied schemes are compared in terms of outage probability, throughput in the delay-sensitive transmission mode and fairness.
Applied Science, Faculty of
Electrical and Computer Engineering, Department of
Graduate

APA, Harvard, Vancouver, ISO, and other styles

9

Pinuela, Manuel. "Ambient RF energy harvesting and efficient DC-load inductive power transfer." Thesis, Imperial College London, 2013. http://hdl.handle.net/10044/1/28090.

Full text

Abstract:

This thesis analyses in detail the technology required for wireless power transfer via radio frequency (RF) ambient energy harvesting and an inductive power transfer system (IPT). Radio frequency harvesting circuits have been demonstrated for more than fifty years, but only a few have been able to harvest energy from freely available ambient (i.e. non-dedicated) RF sources. To explore the potential for ambient RF energy harvesting, a city-wide RF spectral survey was undertaken in London. Using the results from this survey, various harvesters were designed to cover four frequency bands from the largest RF contributors within the ultra-high frequency (0.3 to 3 GHz) part of the frequency spectrum. Prototypes were designed, fabricated and tested for each band and proved that approximately half of the London Underground stations were found to be suitable locations for harvesting ambient RF energy using the prototypes. Inductive Power Transfer systems for transmitting tens to hundreds of watts have been reported for almost a decade. Most of the work has concentrated on the optimization of the link efficiency and have not taken into account the efficiency of the driver and rectifier. Class-E amplifiers and rectifiers have been identified as ideal drivers for IPT applications, but their power handling capability at tens of MHz has been a crucial limiting factor, since the load and inductor characteristics are set by the requirements of the resonant inductive system. The frequency limitation of the driver restricts the unloaded Q-factor of the coils and thus the link efficiency. The system presented in this work alleviates the use of heavy and expensive field-shaping techniques by presenting an efficient IPT system capable of transmitting energy with high dc-to-load efficiencies at 6 MHz across a distance of 30 cm.

APA, Harvard, Vancouver, ISO, and other styles

10

Zhao, Ping [Verfasser], Manfred [Akademischer Betreuer] Glesner, and Thilo [Akademischer Betreuer] Bein. "Energy Harvesting Techniques for Autonomous WSNs/RFID with a Focus on RF Energy Harvesting / Ping Zhao. Betreuer: Manfred Glesner ; Thilo Bein." Darmstadt : Universitäts- und Landesbibliothek Darmstadt, 2012. http://d-nb.info/1106117824/34.

Full text

APA, Harvard, Vancouver, ISO, and other styles

More sources

Books on the topic "RF Energy Harvesting"

1

Sheikh, Javaid A., Taimoor Khan, and Binod Kumar Kanaujia, eds. Intelligent Signal Processing and RF Energy Harvesting for State of art 5G and B5G Networks. Singapore: Springer Nature Singapore, 2024. http://dx.doi.org/10.1007/978-981-99-8771-9.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Penella-López, María Teresa, and Manuel Gasulla-Forner. Powering Autonomous Sensors: An Integral Approach with Focus on Solar and RF Energy Harvesting. Springer London, Limited, 2011.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

3

Penella-López, María Teresa, and Manuel Gasulla-Forner. Powering Autonomous Sensors: An Integral Approach with Focus on Solar and RF Energy Harvesting. Springer, 2014.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

4

Powering Autonomous Sensors An Integral Approach With Focus On Solar And Rf Energy Harvesting. Springer, 2011.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

5

Penella-Lopez, Maria Teresa, and Manuel Gasulla-Forner. Powering Autonomous Sensors: An Integral Approach with Focus on Solar and RF Energy Harvesting. Springer, 2011.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

6

Fontgalland, Glauco. Smart Systems: Theory and Advances. Amplla Editora, 2022. http://dx.doi.org/10.51859/amplla.sst631.1122-0.

Full text

Abstract:

This book aims to highlight the strength and state-of-art of some techniques and methods applied to intelligent systems. Rather to cover the variety of techniques and methods available in the literature, which is out of scope of this book, it focuses on those consolidated and applied and on those with high potential of implementation to smart systems. This book has fourteen chapters covering abroad range of topics in communications. The first three chapters are devoted to state-of-art and review papers on planar filters, unmanned aerial vehicles (UAV), negative group delay, nanoclusters, and tunable lights, while the remain chapters cover specific topics such as smart monitoring, V2I, high-speed links, RF and Optical sensors, composite material, metamaterial, energy harvesting, radar, SWIPT, and electromagnetic sources.

APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "RF Energy Harvesting"

1

Visser, Hubregt J., and Ruud Vullers. "Far-Field RF Energy Transfer and Harvesting." In Micro Energy Harvesting, 321–46. Weinheim, Germany: Wiley-VCH Verlag GmbH & Co. KGaA, 2015. http://dx.doi.org/10.1002/9783527672943.ch15.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Thakar, Parth T., Nigam Shah, Rishabh Shah, Vibhav Sharma, and Yukti Bandi. "Antenna-Based RF Energy Harvesting." In Lecture Notes on Data Engineering and Communications Technologies, 481–91. Singapore: Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-15-1002-1_49.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Paul, J. John, and A. Shobha Rekh. "RF Energy Harvesting for WSNs." In Green Engineering and Technology, 85–102. First edition. | Boca Raton : CRC Press, 2021. |: CRC Press, 2021. http://dx.doi.org/10.1201/9781003176275-6.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Masuch, Jens, and Manuel Delgado-Restituto. "Co-integration of RF Energy Harvesting." In Ultra Low Power Transceiver for Wireless Body Area Networks, 87–103. Heidelberg: Springer International Publishing, 2013. http://dx.doi.org/10.1007/978-3-319-00098-5_5.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Banerjee, Joydeep, and Subhasish Banerjee. "RF Energy Harvesting Circuits and Designs." In Computers and Devices for Communication, 215–21. Singapore: Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-15-8366-7_29.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Hoang, Dinh Thai, and Dusit Niyato. "RF-Based Energy Harvesting Cognitive Cellular Networks." In Handbook of Cognitive Radio, 1–43. Singapore: Springer Singapore, 2017. http://dx.doi.org/10.1007/978-981-10-1389-8_34-1.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Hoang, Dinh Thai, and Dusit Niyato. "RF-Based Energy Harvesting Cognitive Cellular Networks." In Handbook of Cognitive Radio, 1235–77. Singapore: Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-10-1394-2_34.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Ojha, Shailendra Singh, P. K. Singhal, and Vandana Vikas Thakare. "Triple-Wideband Antenna for RF Energy Harvesting." In Communications in Computer and Information Science, 226–37. Cham: Springer Nature Switzerland, 2023. http://dx.doi.org/10.1007/978-3-031-43140-1_20.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Liang, Guangjun, Jianfang Xin, Qun Wang, Lingling Xia, and Meng Li. "Energy Efficiency Optimization for RF Energy Harvesting Relay System." In Lecture Notes of the Institute for Computer Sciences, Social Informatics and Telecommunications Engineering, 53–66. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-68737-3_4.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Grante, Florian, Ghalid Abib, Muriel Muller, and Nel Samama. "Overall Feasibility of RF Energy Harvesting for IoT." In E-Business and Telecommunications, 215–27. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-90428-9_10.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "RF Energy Harvesting"

1

Aminov, Parvizso, and Jai P. Agrawal. "RF Energy Harvesting." In 2014 IEEE 64th Electronic Components and Technology Conference (ECTC). IEEE, 2014. http://dx.doi.org/10.1109/ectc.2014.6897549.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Karthik, G., S. Ajay, and K. J. Jegadishkumar. "Harvesting the RF energy." In 2011 IEEE International Conference on Microwaves, Communications, Antennas and Electronic Systems (COMCAS). IEEE, 2011. http://dx.doi.org/10.1109/comcas.2011.6105809.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Kurvey, Mamta, and Ashwini Kunte. "RF Energy Harvesting System." In 2018 International Conference on Smart City and Emerging Technology (ICSCET). IEEE, 2018. http://dx.doi.org/10.1109/icscet.2018.8537306.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Huang, Yunhan, Ravi Doraiswami, Michael Osterman, and Michael Pecht. "Energy harvesting using RF MEMS." In 2010 Proceedings 60th Electronic Components and Technology Conference (ECTC). IEEE, 2010. http://dx.doi.org/10.1109/ectc.2010.5490638.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Kumari, Priya, and Janardan Sahay. "Investigation on RF energy harvesting." In 2017 Innovations in Power and Advanced Computing Technologies (i-PACT). IEEE, 2017. http://dx.doi.org/10.1109/ipact.2017.8245021.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Abdullah, N., A. M. Shire, E. Mohd, and A. M. Shire. "Rectenna for RF energy harvesting." In 2016 International Conference on Advances in Electrical, Electronic and Systems Engineering (ICAEES). IEEE, 2016. http://dx.doi.org/10.1109/icaees.2016.7888061.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Altinel, Dogay, and Gunes Karabulut Kurt. "Diversity Combining for RF Energy Harvesting." In 2017 IEEE 85th Vehicular Technology Conference (VTC Spring). IEEE, 2017. http://dx.doi.org/10.1109/vtcspring.2017.8108420.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Kitazawa, Shoichi, Hiroshi Ban, and Kiyoshi Kobayashi. "Energy harvesting from ambient RF sources." In 2012 IEEE MTT-S International Microwave Workshop Series on Innovative Wireless Power Transmission: Technologies, Systems, and Applications (IMWS 2012). IEEE, 2012. http://dx.doi.org/10.1109/imws.2012.6215815.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Muniganti, Harikiran, Vivekanand Mannangi, K. J. Vinoy, Jason P. Bommer, and Scott E. Marston. "Immersible antenna for RF energy harvesting." In 2013 IEEE Applied Electromagnetics Conference (AEMC). IEEE, 2013. http://dx.doi.org/10.1109/aemc.2013.7045021.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Zhang, Jingwei, Yi Huang, and Ping Cao. "Harvesting RF energy with rectenna arrays." In 2012 6th European Conference on Antennas and Propagation (EuCAP). IEEE, 2012. http://dx.doi.org/10.1109/eucap.2012.6206340.

Full text

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!