Log in

Relevant bibliographies by topics / Rheological behavior of the polymer / Dissertations / Theses

To see the other types of publications on this topic, follow the link: Rheological behavior of the polymer.

Dissertations / Theses on the topic 'Rheological behavior of the polymer'

Author: Grafiati

Published: 3 June 2025

Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 dissertations / theses for your research on the topic 'Rheological behavior of the polymer.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse dissertations / theses on a wide variety of disciplines and organise your bibliography correctly.

1

Li, Xin. "Investigation of Non-linear Rheological Behavior of Polymeric Liquids." University of Akron / OhioLINK, 2011. http://rave.ohiolink.edu/etdc/view?acc_num=akron1302374414.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Yousefi, Ali Akbar. "Preparation and rheological behavior of polymer-modified asphalts." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 1999. http://www.collectionscanada.ca/obj/s4/f2/dsk1/tape8/PQDD_0001/NQ39408.pdf.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Pole, Sandeep. "Constitutive Modeling of the Rheological Behavior of Rubber Compounds and Plastic Composites." University of Akron / OhioLINK, 2019. http://rave.ohiolink.edu/etdc/view?acc_num=akron155567239888512.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Wang, Mengchen. "Rheological Behavior of Wall-Slip Dominant Solutions." University of Akron / OhioLINK, 2015. http://rave.ohiolink.edu/etdc/view?acc_num=akron1427994338.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Thompson, Thaddeus. "Rheological Study of Linear and Nonlinear Viscoelastic Behavior for Silica-Reinforced Polybutadiene and Polystyrene." University of Akron / OhioLINK, 2005. http://rave.ohiolink.edu/etdc/view?acc_num=akron1134566032.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

IQBAL, KASHIF. "Study of Rheological Behaviour of Coating Paste containing conductive polymer complex." Thesis, Högskolan i Borås, Institutionen Textilhögskolan, 2010. http://urn.kb.se/resolve?urn=urn:nbn:se:hb:diva-20146.

Full text

Abstract:

Conducting polymer coating is the new developing area in the field of advanced textiles. In this project the rheological behaviour of paste containing conducting polymer was studied during formulation to coating application. The literature study is done by keeping all the contents of project in mind and a wide area of conductive polymer, coating methods, binder system and rheology modifier is covered. The rheological behaviour of different fluid containing newtanion and non-newtanion behaviour is discussed for better understanding of the project working. Polyester fabric was coated by knife co

APA, Harvard, Vancouver, ISO, and other styles

7

Li, Si Wan. "A study of micro-rheological behavior of bio-degradable PHA blends /." View Abstract or Full-Text, 2003. http://library.ust.hk/cgi/db/thesis.pl?CENG%202003%20LI.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Qian, Chen. "Linking the Rheological Behavior to the Processing of Thermotropic Liquid Crystalline Polymers in the Super-cooled State." Diss., Virginia Tech, 2016. http://hdl.handle.net/10919/75005.

Full text

Abstract:

Thermotropic liquid crystalline polymers (TLCPs) have attracted great interest because of the combination of their promising properties, which includes high stiffness and strength, excellent processability, and outstanding chemical resistance. TLCPs exhibit inherently low viscosity relative to many other conventional thermoplastics. The low melt viscosity is detrimental to processes requiring high melt strength, such as extrusion blow molding, film blowing, thermoforming and multilayer coextrusion. Our laboratory has developed a unique method to increase the viscosity of TLCPs by first raising

APA, Harvard, Vancouver, ISO, and other styles

9

Zhu, Xiangyang. "Investigation of Non-Linear Rheological Behaviors of Entangled Polymer Melts in Complex Geometries." University of Akron / OhioLINK, 2012. http://rave.ohiolink.edu/etdc/view?acc_num=akron1346733189.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Ali, Mahdi. "Study of the bitumen aging effects on the rheological properties and fatigue behavior." Master's thesis, Alma Mater Studiorum - Università di Bologna, 2018. http://amslaurea.unibo.it/16255/.

Full text

Abstract:

A study of bitumen aging effects on the rheological properties and fatigue behavior is carried out on five polymer modified bitumen provided by an oil company. Dynamic Shear Rheometer (DSR), is used to perform advanced experimental investigation. It allows practicing frequency sweep tests, fatigue tests and time sweep tests. Polymer modified bitumen with different percentage of SBS with or without the presence of crumb rubber are tested before and after short and long aging processes. Master curves were generated based on frequency sweep tests data, they are studied, and a comparison was cond

APA, Harvard, Vancouver, ISO, and other styles

11

Reynolds, Carl David. "Rheological behaviour of polymer melts and its relationship with underlying structure and topology." Thesis, Durham University, 2018. http://etheses.dur.ac.uk/12665/.

Full text

Abstract:

This thesis contains a detailed study of the relationship between the rheological properties of polymers and their underlying structure. Starting from model polymer systems, rheological complexity has been built up to enable predictions for industrially complex mixtures relevant to tyre processing and manufacture. Polymers which are representative of the tyre industry have been used (e.g. polyisoprene, polybutadiene, polystyrene). Small amplitude oscillatory shear (SAOS) tests have been reported for a range of polymers of different molecular weight and architecture. Combining this with molecul

APA, Harvard, Vancouver, ISO, and other styles

12

Gagnon, Gerard R. "The Colloidal Properties and Rheological Behavior of Precipitated Calcium Carbonate Suspensions Dispersed with Sodium Polyacrylate." Fogler Library, University of Maine, 2008. http://www.library.umaine.edu/theses/pdf/GagnonG2008.pdf.

Full text

APA, Harvard, Vancouver, ISO, and other styles

13

Yin, Wen. "Phase and Rheological Behavior of Langmuir Films at the Air/Water Interface: Polyhederal Oligomeric Silsesquioxanes (POSS), POSS/Polymer Blends, and Magnetic Nanoparticles." Diss., Virginia Tech, 2009. http://hdl.handle.net/10919/37920.

Full text

Abstract:

For over a century, Langmuir films have served as excellent two-dimensional model systems for studying the conformation and ordering of amphiphilic molecules at the air/water (A/W) interface. With the equipment of Wilhelmy plate technique, Brewster angle microscopy (BAM), and surface light scattering (SLS), the interfacial phase and rheological behavior of Langmuir films can be investigated. In this dissertation, these techniques are employed to examine Langmuir films of polyhedral oligomeric silsesquioxane (POSS), polymer blends, and magnetic nanoparticles (MNPs). In a first time, SLS is em

APA, Harvard, Vancouver, ISO, and other styles

14

Mokhtari, Mehdi. "Laboratory Investigation On Gelation Behavior Of Xanthan Crosslinked With Borate Intended To Combat Lost Circulation." Master's thesis, METU, 2010. http://etd.lib.metu.edu.tr/upload/3/12611553/index.pdf.

Full text

Abstract:

This thesis addresses the application of xanthan/borate gel for lost circulation treatment. Steady shear viscometry method was applied in which the gel system was under constant shear rate while apparent viscosity was being recorded. The apparent viscosity was constant up to initial gelation time in which viscosity started to build up. Four parameters: initial and final gelation times as well as initial and final viscosities are defined and a correlation is derived between those parameters and four variables: polymer blended with crosslinker, pH-controller, and magnesium chloride concentration

APA, Harvard, Vancouver, ISO, and other styles

15

Ahmed, Riaz. "The relationship between processing behaviour and rheological properties of molten polyethylenes." Thesis, University of Cambridge, 1993. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.261584.

Full text

APA, Harvard, Vancouver, ISO, and other styles

16

Krückel, Johannes [Verfasser]. "Electrical and Rheological Behaviour of Carbon Black Filled Polymers / Johannes Krückel." München : Verlag Dr. Hut, 2015. http://d-nb.info/1069019909/34.

Full text

APA, Harvard, Vancouver, ISO, and other styles

17

O'Connor, Niall Patrick Taaffe. "Rheological theory of entangled polymer melts." Thesis, University of Cambridge, 1992. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.259630.

Full text

APA, Harvard, Vancouver, ISO, and other styles

18

Kazatchkov, Igor B. "Influence of molecular structure on rheological and processing behaviour of molten polymers." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 1999. http://www.collectionscanada.ca/obj/s4/f2/dsk1/tape8/PQDD_0034/NQ38910.pdf.

Full text

APA, Harvard, Vancouver, ISO, and other styles

19

Getzie, Travis David. "Mangeto-Optical and Rheological Behaviors of Oil-Based Ferrofluids and Magnetorheological Fluids." University of Akron / OhioLINK, 2012. http://rave.ohiolink.edu/etdc/view?acc_num=akron1333823536.

Full text

APA, Harvard, Vancouver, ISO, and other styles

20

Carlin, Brian Anthony Christopher. "Oscillatory surface rheological studies of polymer solutions." Thesis, University College London (University of London), 1993. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.400378.

Full text

APA, Harvard, Vancouver, ISO, and other styles

21

Boudara, Victor Ange Henri. "Supramolecular and entangled polymer materials : rheological models." Thesis, University of Leeds, 2017. http://etheses.whiterose.ac.uk/19802/.

Full text

Abstract:

This thesis is concerned with the dynamics and rheology of polymers, and in particular on the influence of entanglements and supramolecular “sticky” groups. The text is organised as follows: In Part I, we consider these effects in isolation. We begin with an introductory chapter detailing established theory for unentangled polymers, unentangled sticky polymers, and entangled polymers. In Chapter 2, we develop a stochastic model for linear rheology of unentangled polymers with stickers along the backbone that we then compare with experimental data and the “classic” sticky Rouse model. In Chapte

APA, Harvard, Vancouver, ISO, and other styles

22

Hristov, Velichko Vlachopoulos John. "Rheological aspects of wood polymer composites extrusion." *McMaster only, 2007.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

23

Airey, Gordon Dan. "Rheological characteristics of polymer modified and aged bitumens." Thesis, University of Nottingham, 1997. http://eprints.nottingham.ac.uk/13431/.

Full text

Abstract:

The demands on asphalt pavements, as a result of the growth in traffic volumes, traffic loads and tyre contact pressures, has resulted in an increased interest in the use of modified bitumens, particularly over the last ten years. Of the various types of modified and specialised binders that are available worldwide, polymer modified bitumens (PMB’s) have tended to be the most popular. Polymer modification significantly alters the rheological characteristics of the binder, thereby requiring the use of fundamental rheological testing methods rather than empirical methods, to provide an indicatio

APA, Harvard, Vancouver, ISO, and other styles

24

Dowley, John Gordon. "Rheological problems associated with the polymer processing industry." Thesis, Aberystwyth University, 1988. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.391703.

Full text

APA, Harvard, Vancouver, ISO, and other styles

25

Suzuki, Shinya. "Rheological Properties of Telechelic Associative Polymer in Aqueous Solution." 京都大学 (Kyoto University), 2015. http://hdl.handle.net/2433/200500.

Full text

APA, Harvard, Vancouver, ISO, and other styles

26

Liu, Chun. "Physical and rheological characterization of selected polymer-modified asphalts." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 1998. http://www.collectionscanada.ca/obj/s4/f2/dsk2/tape17/PQDD_0004/MQ35020.pdf.

Full text

APA, Harvard, Vancouver, ISO, and other styles

27

Twite, Kabamba Eddy. "Polymer foams and composites recycling : Rheological and Macromolecular Investigations." Thesis, Université Laval, 2010. http://www.theses.ulaval.ca/2010/27578/27578.pdf.

Full text

APA, Harvard, Vancouver, ISO, and other styles

28

Gutsul, O. V. "The rheological and electrical properties of polymer-colloid solutions." Thesis, БДМУ, 2020. http://dspace.bsmu.edu.ua:8080/xmlui/handle/123456789/18320.

Full text

APA, Harvard, Vancouver, ISO, and other styles

29

Wang, Yingru. "Modeling of polymer melt/nanoparticle composites and magneto-rheological fluids." Columbus, Ohio : Ohio State University, 2006. http://rave.ohiolink.edu/etdc/view?acc%5Fnum=osu1135877847.

Full text

APA, Harvard, Vancouver, ISO, and other styles

30

Mahi, Hassanabadi Hojjat. "Relations between microstructural development and rheological properties in polymer nanocomposites." Thesis, Université Laval, 2013. http://www.theses.ulaval.ca/2013/30345/30345.pdf.

Full text

Abstract:

Cette thèse porte principalement sur la compréhension des relations entre la microstructure et les propriétés rhéologiques des nano-composites à base d’un copolymère d’éthylène-acétate de vinyle (EVA). La première partie de l'étude concerne les nano-composites d’EVA avec de la cellulose nanocrystalline (NCC). Cette partie cherche à inférer la structure d’échantillons inconnus à l’aide de mesures rhéologiques. En analysant les propriétés obtenues par des mesures rhéologiques en cisaillement et en élongation, les principaux mécanismes étant à l’origine du renforcement de ces nano-composites sont

APA, Harvard, Vancouver, ISO, and other styles

31

Juang, Yi-Je. "Polymer professing and rheological analysis near the glass transition temperature." The Ohio State University, 2001. http://rave.ohiolink.edu/etdc/view?acc_num=osu1302020366.

Full text

APA, Harvard, Vancouver, ISO, and other styles

32

Juang, Yi-Je. "Polymer processing and rheological analysis near the glass transition temperature /." The Ohio State University, 2001. http://rave.ohiolink.edu/etdc/view?acc_num=osu1486398195327065.

Full text

APA, Harvard, Vancouver, ISO, and other styles

33

Mård, Moa. "Use of Rheological Properties to Predict Extrusion Parameters." Thesis, KTH, Skolan för kemi, bioteknologi och hälsa (CBH), 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-266158.

Full text

Abstract:

Paxymer AB is a company that manufactures and sells flame retardants for plastics, based on their patented technology. The flame retardants are often sold as a master-batch that the customers mix into their own plastic products. Paxymer has two master-batches with the exact same formulation, but are produced with different temperature profiles. The high temperature extrusion process produces pellets with good properties whereas the low temperature process do not. The aim of this study was to define what rheological properties are important in the extrusion process, and how they can be correlat

APA, Harvard, Vancouver, ISO, and other styles

34

Lashkari, Omid. "The rheological behavior of semi-solid A356 alloy." Thèse, Chicoutimi : Université du Québec à Chicoutimi, 2006. http://theses.uqac.ca.

Full text

Abstract:

Thèse (D.Eng.) -- Université du Québec à Chicoutimi, 2006.<br>La p. de t. porte en outre: Dissertation presented to the University of Quebec at Chicoutimi in partial fulfilment of the requirement for the degree of doctor of philosophy in engineering. CaQCU Bibliogr.: f. 177-184. Document électronique également accessible en format PDF. CaQCU

APA, Harvard, Vancouver, ISO, and other styles

35

Al-Kawaz, Ammar. "Development and rheological analysis of a surface polymer nanocomposite anti-friction." Thesis, Strasbourg, 2015. http://www.theses.fr/2015STRAE025/document.

Full text

Abstract:

L'objectif de cette thèse est l'identification de couplages (nanoparticules / matrice de poly(methyl-methacrylate) PMMA) qui renforcent la rigidité de surface du PMMA tout en conservant le maximum de transparence. Le choix s'est porté sur trois type de nanoparticules carbonées : du graphène multicouches (FLG), de l'oxyde de graphène (GO) et des nanotubes de carbones (MWCNT). Une première décrit la préparation et la fonctionnalisation de ces trois types de nanoparticules pour assurer une meilleure dispersion dans la matrice. Deux méthodes ont été retenues pour réaliser ces matériaux composites

APA, Harvard, Vancouver, ISO, and other styles

36

O'Keefe, Samantha Jane. "A study of the rheological properties of polymer modified cement pastes." Thesis, University of the West of England, Bristol, 1991. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.293326.

Full text

Abstract:

The work outlined in this thesis describes how rheological techniques can be used to gain insight into the behaviour of complex hydrating systems. These techniques are currently used to elucidate interparticle interactions of concentrated colloidal dispersions. Those used here were stress relaxation, pulse shearometry and oscillation. These enabled parameters such as the dynamic moduli, relaxation moduli, relaxation spectrum and limiting moduli to be obtained. These all give a measure of the strength of interaction of the colloidal system under different conditions, without reducing these inte

APA, Harvard, Vancouver, ISO, and other styles

37

Brandt, Jennifer M. "Rheological and abrasion resistant properties of transparent polymer/silicate nanocomposite coatings." [Gainesville, Fla.] : University of Florida, 2005. http://purl.fcla.edu/fcla/etd/UFE0010040.

Full text

APA, Harvard, Vancouver, ISO, and other styles

38

Ramazani, Saadatabadi Ahmad. "Rheological behavior of thermoplastic composites, experiments and theoretical predictions." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 1999. http://www.collectionscanada.ca/obj/s4/f2/dsk1/tape8/PQDD_0001/NQ39391.pdf.

Full text

APA, Harvard, Vancouver, ISO, and other styles

39

Langevin, Marc-André. "Rheological and mechanical behavior of microfine cement-based grouts." Thesis, McGill University, 1993. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=68037.

Full text

Abstract:

The primary objective of this experimental research program was to define the characteristics of microfine cement-based grouts at different ambient temperatures using the following parameters: (1) Ten cements: 2 Portland cements (Type 10 and Type 30) were used as reference cements, 1 Portland with 8% of silica fume, and 7 microfine cements: Microcem 650SR, Microcem 900, Lanko 737, MC500, Spinor A12, Spinor A16 and Spinor E12. (2) Thirteen characteristics: 3 rheological properties (viscosity, bleeding, setting time) and 10 mechanical properties (grain size, modulus of elasticity and Poisson's r

APA, Harvard, Vancouver, ISO, and other styles

40

Shyshko, Sergiy. "Numerical simulation of the rheological behavior of fresh concrete." Doctoral thesis, Saechsische Landesbibliothek- Staats- und Universitaetsbibliothek Dresden, 2014. http://nbn-resolving.de/urn:nbn:de:bsz:14-qucosa-131751.

Full text

Abstract:

This thesis reports recent numerical investigation of the rheological behavior of fresh concrete using the Distinct Element Method (DEM). Some relevant questions of the concrete rheology e.g. the influence of the concrete composition on the rheological behavior of the fresh concrete, the experimental determination of the Bingham rheological constants as well as the use of these constants in the numerical simulation were discussed thoroughly. An important topic of the performed investigation was the development of the numerical model for fresh concrete which enables simple, fast and stable pred

APA, Harvard, Vancouver, ISO, and other styles

41

Owusu, Gyebi Prince. "Investigating the rheological behavior of Witbank coal water mixtures." Master's thesis, University of Cape Town, 2016. http://hdl.handle.net/11427/20984.

Full text

Abstract:

South Africa has large low-grade coal reserves. With the prospect of expanding its coal demands for exports and power generation, it is important that the beneficiation and transport of coal in the country are economical. The current mode of transporting coal has some drawbacks, which include inefficient rail infrastructure, long distances, and several environmental concerns related to air pollution, water pollution, and traffic risks. It is, therefore, important to investigate efficient means of coal transportation, which will also reduce environmental impacts. The transport of highly concent

APA, Harvard, Vancouver, ISO, and other styles

42

Qadeer, Muhammad Irfan. "SmCo for polymer bonded magnets : Corrosion, silanization, rheological, mechanical and magnetic properties." Doctoral thesis, KTH, Keramteknologi, 2012. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-106809.

Full text

Abstract:

This thesis presents the study of organofunctional alkoxysilane coatings to prevent high temperature oxidation of Sm-Co powders. Sm-Co are important permanent magnetic alloys, owing to their high Curie temperature and large values of magnetocrystalline anisotropy. They possess stable magnetic properties in the temperature range -40 to 120 °C which makes them very attractive candidates for automobile’s electric motors. However, the environmental conditions for such applications are a sum of high temperatures, humidity, fuels and salts which provide perfect breeding ground for corrosion. In this

APA, Harvard, Vancouver, ISO, and other styles

43

Hu, Yunato. "Rheological and rheo-optical studies of surfactant and water soluble polymer solutions." Case Western Reserve University School of Graduate Studies / OhioLINK, 1995. http://rave.ohiolink.edu/etdc/view?acc_num=case1058194302.

Full text

APA, Harvard, Vancouver, ISO, and other styles

44

Quarcoo, Naa Larteokor. "Modeling polymer-colloid phase behavior." Access to citation, abstract and download form provided by ProQuest Information and Learning Company; downloadable PDF file, 152 p, 2007. http://gateway.proquest.com/openurl?url_ver=Z39.88-2004&res_dat=xri:pqdiss&rft_val_fmt=info:ofi/fmt:kev:mtx:dissertation&rft_dat=xri:pqdiss:1440615.

Full text

APA, Harvard, Vancouver, ISO, and other styles

45

Moon, Hee-Kyung. "Rheological behavior and microstructure of ceramic particulate/aluminum alloy composites." Thesis, Massachusetts Institute of Technology, 1990. http://hdl.handle.net/1721.1/13638.

Full text

Abstract:

Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Materials Science and Engineering, 1990.<br>Vita.<br>Includes bibliographical references (leaves 221-229).<br>by Hee-Kyung Moon.<br>Ph.D.

APA, Harvard, Vancouver, ISO, and other styles

46

França, Marylinda Santos de. "Rheological behavior of engineered cementitions composites reinforced with PVA fibers." Universidade de São Paulo, 2018. http://www.teses.usp.br/teses/disponiveis/3/3146/tde-03102018-140459/.

Full text

Abstract:

The rheological behavior analysis of Engineered Cementitious Composites (ECC) is key to understand how the different preparation techniques affect the composite mechanical performance. However, the rheological assessment of reinforced materials becomes more complex since fibers usually cause flow disturbances not found in nonreinforced cementitious materials. Besides that, simple workability measurement techniques are not able to fully understand the composite behavior in the fresh state creating the need for more precise techniques to be employed. The main objectives of this study were to eva

APA, Harvard, Vancouver, ISO, and other styles

47

Foss, David R. Brady John F. Brady John F. "Rheological behavior of colloidal suspensions : the effects of hydrodynamic interactions /." Diss., Pasadena, Calif. : California Institute of Technology, 1999. http://resolver.caltech.edu/CaltechETD:etd-02132007-143514.

Full text

APA, Harvard, Vancouver, ISO, and other styles

48

Moon, Jiyoung. "Rheological Behavior of Complex Fluid with Deformable and Rigid Particles." Thesis, The University of Sydney, 2017. http://hdl.handle.net/2123/17106.

Full text

Abstract:

Predicting the rheological properties of particles in matrix is one of the most challenging and complicated problems in material and fluid sciences. The complication is arisen by the particles collision and interactions with the surrounding fluid. A full description of the rheology of particles requires a complete understanding of the interactions between particles, interaction between the particles and the matrix fluid, and interactions between channel and particles. Thus consideration of above factors can lead to a better understanding of the rheological behavior of suspensions with particle

APA, Harvard, Vancouver, ISO, and other styles

49

Flew, S. R. G. "Extensional strain analysis of the onset of elasticity in polyacrylamide solutions flowing through porous media." Thesis, University of Bristol, 1990. http://hdl.handle.net/1983/742dc099-9895-4066-b0f9-b3ec2a1391f6.

Full text

APA, Harvard, Vancouver, ISO, and other styles

50

Surve, Megha Madhukar. "Interactions, phase behavior and rheological properties of polymer-nanoparticle mixtures." Thesis, 2006. http://hdl.handle.net/2152/3505.

Full text

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!