Relevant bibliographies by topics / Řídicí software

Contents

  1. Journal articles
  2. Dissertations / Theses

Academic literature on the topic 'Řídicí software'

Author: Grafiati
Published: 4 June 2021
Last updated: 7 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Řídicí software.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Řídicí software"

1

Zibner, Jan. "Akceptace právní osobnosti v případě umělé inteligence." Revue pro právo a technologie 9, no. 17 (2018): 19–49. http://dx.doi.org/10.5817/rpt2018-1-2.

Full text
Abstract:
Umělá inteligence je fenoménem prosazujícím se postupně čím dál více v právních vztazích. Ve většinovém chápání je umělá inteligence softwarem s nejrůznějšími schopnostmi, tedy objektem právního vztahu. Sílí však debaty nad tím, zda by umělá inteligence nemohla být subjektem právního vztahu. Poukazuje se na to, že umělá inteligence je schopna autonomně tvořit, učit se, řídit vozidla, ale je též je schopna získat trvalé bydliště, státní občanství, a dokonce sama sebe reprodukovat. Nicméně k tomu, aby umělá inteligence mohla být subjektem právního vztahu, je třeba jí přiznat právní osobnost jako
APA, Harvard, Vancouver, ISO, and other styles

Dissertations / Theses on the topic "Řídicí software"

1

Křepelka, Jan. "Numerický model řídicí jednotky spalovacího motoru." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2014. http://www.nusl.cz/ntk/nusl-231326.

Full text
Abstract:
Master’s thesis deals with issues of controlling the amount of fuel injected by the control unit. Model of four-cylinder engine and computational model of control unit were constructed in the simulation software Lotus Engine Simulation. Then was made model checking of the control unit by simulation two transients (acceleration and shifting). In conclusion was made application a created model on the New European Driving Cycle (NEDC) and appropriately evaluated and processed the results of this simulation.
APA, Harvard, Vancouver, ISO, and other styles
2

Vychopeň, David. "Stanovení parametrů matematického modelu řídicí jednotky spalovacího motoru." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2015. http://www.nusl.cz/ntk/nusl-231768.

Full text
Abstract:
Master’s thesis is focused on creating a suitable methodology for determining the parameters of the electronic control unit of the engine. Discusses how the measurement of input data into the methodology, the basic description of its functions and display the resulting values. It includes evaluation of applicability of the methodologies and the real parameters when compared with the parameters established on the basis of established methodology.
APA, Harvard, Vancouver, ISO, and other styles
3

Beneš, Eduard. "Řídicí systém pro testování linuxových aplikací." Master's thesis, Vysoké učení technické v Brně. Fakulta informačních technologií, 2009. http://www.nusl.cz/ntk/nusl-236777.

Full text
Abstract:
This thesis discusses the area of a control system for application testing in Linux. There is a need for testing software and its quality using automated software tools. Huge number of testing tools is available, Red Hat Test System (RHTS) being one of them. Dierent approaches to classi cation and evaluation of a testing tools are presented. Selected software testing tools were evaluated and compared with RHTS. The thesis then presents a design of a system for non-interactive application testing in Linux with support for RHTS tests and with focus on future enhancements. Implemented system is n
APA, Harvard, Vancouver, ISO, and other styles
4

Matějů, Jan. "Řídicí jednotka pro robotický vysavač." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2012. http://www.nusl.cz/ntk/nusl-219701.

Full text
Abstract:
This paper is in introduction focused on review of robotic vacuum cleaning and evaluation of available products qualities. However the main focus of this paper is system design of all subsystems, control systems and PCD design of robot electronics. In this paper is also described a method for evaluating approximate distance of robot from the obstacle. There are also described problems of system design of IR proximity sensors. The last part of this work is development of control software for robot and its testing.
APA, Harvard, Vancouver, ISO, and other styles
5

Michl, Antonín. "Návrh a realizace řídící jednotky pneumatického manipulátoru." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2016. http://www.nusl.cz/ntk/nusl-254384.

Full text
Abstract:
This thesis deals with design of control unit for pneumatic manipulator. The control unit is connect to PC, where the special designed software is running. This system allows you to easily control the manipulator. Controlling process can be realize directly by user or automatically by program.
APA, Harvard, Vancouver, ISO, and other styles
6

Meindl, Jan. "Návrh a realizace elektroniky a software autonomního mobilního robotu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2017. http://www.nusl.cz/ntk/nusl-320117.

Full text
Abstract:
The master's thesis deals with the design and realization of embedded control system and software of the autonomous mobile robot DACEP. The research section focuses on the selection of sensory equipment. Moreover, the design of the embedded control system and the communication interface between this system and the master PC is described in detail, followed by the design of localization and navigation software that uses ROS framework. The section is written as instructive as possible for the development of robots of similar construction. Finally the development of a graphical interface for robo
APA, Harvard, Vancouver, ISO, and other styles
7

Podivín, Ladislav. "Design and implementation of control software libraries for fiber characterization." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2010. http://www.nusl.cz/ntk/nusl-218304.

Full text
Abstract:
Tato práce se zabývá návrhem a implementací dvou konkrétních softwarových modulů, které jsou částí distribuovaného řídícího systému CoSMic. Tento systém je určen pro řízení speciálního zařízení pro charakterizaci papírových vláken. Prvním vyvinutým modulem je HapticFiber, ten má poskytovat rozhraní mezi řídícím systémem a speciálním vstupním zařízením - haptic device. Druhým modulem je ViCo, jehož účelem je poskytnout softwarovou obálku pro uživatelem definovaný algoritmus zpracovaní obrazu. Tento modul musí být připraven splnit určitá časová omezení, proto je nutné, aby běžel v rámci operační
APA, Harvard, Vancouver, ISO, and other styles
8

Šulc, Dalibor. "Využití interferometrie v VT UHV SPM." Doctoral thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2015. http://www.nusl.cz/ntk/nusl-234581.

Full text
Abstract:
The thesis is aimed at the development of Scanning Probe Microscopes (SPM). It describes design and development of modular controll electronics to be applied eectively on more microscopes SPM. Control electronics consist of stabilized power source, high–voltage amplier and probe signal amplier. The open–source project GXSM has been introduced. It contains a logic control unit which controls scanning, acquiring data and feedback control. GXSM provides a graphical user interface based on linux operation system. Second part of the thesis is aimed at design and development of interferometric deect
APA, Harvard, Vancouver, ISO, and other styles
9

Kabátník, Václav. "Dvoukomorový tester pro akumulátorové vrtačky." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2018. http://www.nusl.cz/ntk/nusl-377155.

Full text
Abstract:
This thesis deals with the design and subsequent realization of a bicameral tester for cordless drills. The tester will contain with two chambers in which the device will be tested. Part of the solution is the description of the parameters of the tested devices and the design of the tester concept. In addition, the thesis deals with the design of a mechanical structure that will test the equipment in both chambers and then design and realization of the relevant electrical equipment including the electrical switchboard. The thesis describes the Mosaic development environment for development of
APA, Harvard, Vancouver, ISO, and other styles
10

Faltičko, Martin. "Návrh řídicího software pro RC soupravu." Master's thesis, Vysoké učení technické v Brně. Fakulta informačních technologií, 2012. http://www.nusl.cz/ntk/nusl-236605.

Full text
Abstract:
This document deals with the control software for professional Model-radio transmitter. The aim of the thesis is to design a functional solution that would satisfy the requirements of existing aircraft modelers (and others), thus to compete against other manufacturers of radio sets. In the following pages there is presented the design and implementation of user interface with regard to functionality and clarity, then the basic algorithms for driving aircraft models are explored. As a result of those findings the control software is implemented for an embedded device using the supplied hardware
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography