Academic literature on the topic 'Řiditelný kmitočtový filtr'

Tato disertační práce se zaměřuje na výzkum v oblasti frekvenčních filtrů. Hlavním cílem je navrhnout a analyzovat plně diferenční kmitočtové filtry pracující v proudovém módu a využívající moderní aktivní prvky. Prezentované filtry jsou navrženy za použití proudových sledovačů, operačních transkonduktančních zesilovačů, plně diferenčních proudových zesilovačů a transrezistančních zesilovačů. Návrh se zaměřuje na možnost řídit některý z typických parametrů filtru pomocí řiditelných aktivních prvků, které jsou vhodně umístněny do obvodové struktury. Jednotlivé prezentované filtry jsou navrženy v nediferenční a diferenční verzi. Velký důraz je věnován srovnání plně diferenčních struktur s jejich odpovídajícími nediferenčními formami. Funkčnost jednotlivých návrhů je ověřena simulacemi a v některých případech i experimentálním měřením.

This doctoral thesis deals with a voltage conveyor as a new active element for an analog signal processing. Various types of the voltage conveyors have been defined as a dual active elements to current conveyors based on a duality principle. Conception of a new active element that can supply all types of the voltage conveyors have been proposed. The active element has been named an universal voltage conveyor – UVC. A voltage follower is a basic building block of the UVC. The well-known circuit realization of the voltage follower comes from four transconductance amplifiers with key parameters (voltage transfer and output resistance) derived from relative accuracy of used transconductance amplifiers has been used by UVC fabrication. A new circuit realization of the voltage follower comes from three transconductance amplifiers with key parameters also derived from relative accuracy of used transconductance amplifiers has been designed. Further the doctoral thesis deals with a frequency filter with the voltage conveyors design using signal flow graphs. Various graphs of the voltage conveyors comes from the various circuit analysis methods with non-regular active elements have been created. A basic graph of the voltage conveyor has been designed with help of a known controlled sources graphs. This graph have been used to design of multifunctional frequency filters, filters with high input and low output impedance and controlled frequency filters. A design procedure have been created so that in specific step of the frequency filter design the basic graph of the voltage conveyor could be extended to graph of any type of the voltage conveyor. Thereby a practical usage of various types of the voltage conveyors has been finding out. Further a new method of frequency filter design based on expanding of the signal flow has beenproposed.

The work deals with design of transformation cells suitable for realization of higher orders frequency filters with possibility of cutoff frequency control. At first, there is a common description of frequency filters and active elements like current and voltage conveyors. Furthermore assumptions of cutoff frequency control are defined which result in a convenient characteristical equation. Phylosophy of synthetic elements DP , EP , DS , ES including a possibility of change of cutoff frequency is next in line. By exploitation of synthetic elements theory new circuit’s schemes of transformation cells are searched. The work continues with the choice of appropriate transformation cells for resulting circuit’s solutions of frequency filters with possibility of cutoff frequency control by using transfer coefficients of active elements or with help of passive elements. The work concludes with verification of its proper function based on a simulation executed in OrCAD and with practical implementation of choosen circuit’s solution.

The aim of the thesis is to study the possibilities of the electronic frequency ?lter com- posed of active elements operating in current mode. The main opportunities lie in the change control parameters, most are marginal or quality factor frequency. As the active elements are considered especially CC (Current Convejor), controllable current ampli?er DACA (Digitally Adjustable Current Ampli?er) or combination with the current tracker MO-CF (Multiple Output Current Follower). Another part will focus on the management of the above parameters using digital potentiometers and choosing the appropriate ?lter structure. The ?nal task was to digital control parameters using a PC and measuring its properties.

This master´s thesis deals an active elements called digitally controlled current amplifier, multiple-output current follower and its usage in tunable frequency filters. These tunable frequency filters operate in a pure current mode. In the first part of this work are presented the different types of current active elements. Universal current conveyor, multiple-output current follower, digitally controlled current amplifier (UCC, MO-CF, DCCA). In the second part of this work are introduced particular methods of design tunable frequency filters. Special attention is given to using the design method of via autonomous circuits because it is one of the most. In the last part of this thesis are designed and computer-simulated individual multifunction tunable frequency filters with those already active yet elements. These filters were designed via autonomous circuits or modification of existing circuits. The functionality of the proposed filtres have been verified by computer simulation. Snap3 program was used for the symbolic analyse of circuit and OrCad PSpice program was used to simulate the characteristics of multifunction filters.

The master thesis deals with design of the fully differential frequency filters working in the current mode and is focused on possibilities of the natural frequency and the quality factor adjustment. At the beginning, there is a brief description of frequency filters and active elements (MO-CF, FD-CF and DACA), which are used in the thesis. Furthermore, simplified signal flow graphs design method and transformation of passive and active elements to the differential structures are described. The designs of four differential circuitries which provide possibility of tuning the natural frequency or quality factor by the gain of the DACA element are shown in the thesis. Simulation results made in OrCAD program with help of third-order models are included. The practical implementation of the differential frequency filter for tuning of the natural frequency by the DACA elements is shown in the last chapter.

The master thesis deals with designs of the single-ended and the fully-differential secondorder frequency filters with adjustable parameters. This filters operate in the current mode where main element is the current amplifier DACA (Digitally Adjustable Current Amplifier). The first part describes basic behaviour of frequency filters and distribution according to filter funcion, used parts and structure. The second part of thesis describes the design of the frequency filters by the M-C signal-flow graphs and the transformating single-ended structures to the fully-differential forms. The next part deals with properties of the active elements and their simulation models. The following part describe six circuits of the frequency filters with adjustable parameters and their simulations. Four simulation models with different properties were used for simulating of the DACA in the each circuits. The last part deals with the practical design and measurement of the selected frequency filters.

The thesis deals with electronically adjustable and configurable applications of the modern active elements. In the field there were presented various active elements in applications of the analog filters and oscillators which stem from basic and more or less similar principles of circuit synthesis and design. However, there is not provided study of real behavior in detail and in most cases electronic control of the various parameters in application is not verified. In the precise design of application is very important to identify problematic features and determine how much it influences functionality of the device. In this work several filtering structures based on common and modified synthesis principles (integrator loops) are compared in the view of multifunctionality, configurability, variability, kind of used electronic control and impact of influences of real elements on behavior. There are used standard methods like adjusting of variable transconductance, intrinsic value of current input resistance and not so common method based on variable current gain in design of modified and improved multifunctional filtering circuits. The last method of mentioned control enabled to find quite unique filter which allows continuous electronic change of transfer from band-reject to all-pass filter of the 2nd order without reconnection. It is much simpler than previous and more common integrator loops. Larger part of this work is focused on electronically controllable oscillators mainly on quadrature types. There is presented several very simply and elementary realizations which require minimal number of active and passive elements. There are also slightly or more complicated solutions which remove some drawbacks of mentioned simpler variants. First of all there is given attention on study of real behavior which make obvious different problems with mutual dependence of oscillation condition and oscillation frequency, dependence of produced amplitudes (quadrature types) on parameter which is controlling oscillation frequency, influence of this parameter on oscillation condition, etc. In the framework of this part of the thesis there was introduced a novel modification of current conveyor transconductance amplifier (CCTA) so called current-gain-controlled current conveyor transconductance amplifier (CGCCCTA). Requirements for novel applications in the field of oscillators for newly developed controllable current amplifier and digitally controllable current amplifier (DACA) at the Department of Telecommunication FEEC BUT lead to creation of several chapters of this work where mentioned active elements can be used. The important contribution of this work (for practical approach) is also experimental testing of most of designed circuits and determination of exact design equations and rules which take into account real behavior of circuits and confirm results obtained from experiments.