Log in

Relevant bibliographies by topics / Risk priority number / Journal articles

To see the other types of publications on this topic, follow the link: Risk priority number.

Journal articles on the topic 'Risk priority number'

Author: Grafiati

Published: 4 June 2021

Last updated: 26 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 journal articles for your research on the topic 'Risk priority number.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

Putcha, Chandrasekhar, Subhrajit Dutta, and Jessica Rodriguez. "Risk Priority Number for Bridge Failures." Practice Periodical on Structural Design and Construction 25, no. 2 (2020): 04020010. http://dx.doi.org/10.1061/(asce)sc.1943-5576.0000480.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Barta, Dalibor, Jana Gallikova, and Jacek Caban. "Maintenance system of semi-trailer and risk priority number." Archives of Automotive Engineering – Archiwum Motoryzacji 86, no. 4 (2019): 101–9. http://dx.doi.org/10.14669/am.vol86.art7.

Full text

Abstract:

The new maintenance system of semi-trailer combination as a most used road freight transport means is the subject of interest in this article. The real experiences from practice and creation of the FMEA analysis of the system using software support are the basis of wear and damage analysis of air brake system components used on the semi-trailer combination. The desire to improve market position of the company, customer satisfaction, but also the product specifications, government regulatory requirements, agency recommendations, and legal implications are the grounds for continuous improvement

APA, Harvard, Vancouver, ISO, and other styles

3

Kamble, Swati N., and B. Rajiv. "Significance of risk priority number in machine condition monitoring." Materials Today: Proceedings 50 (2022): 1930–35. http://dx.doi.org/10.1016/j.matpr.2021.09.317.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Di Bona, Gianpaolo, Alessandro Silvestri, Antonio Forcina, and Antonella Petrillo. "Total efficient risk priority number (TERPN): a new method for risk assessment." Journal of Risk Research 21, no. 11 (2017): 1384–408. http://dx.doi.org/10.1080/13669877.2017.1307260.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Lee, Yu Cheng, and Jih Kuang Chen. "Utility Priority Number Evaluation for FMEA." Journal of Failure Analysis and Prevention 7, no. 5 (2007): 329. http://dx.doi.org/10.1007/s11668-007-9072-y.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Shin, Woonchul, and Jongmin Chae. "Risk Priority Number using FMEA by the Plastic Moulding Machine." Journal of the Korean Society of Safety 30, no. 5 (2015): 108–13. http://dx.doi.org/10.14346/jkosos.2015.30.5.108.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Krisnaningsih, Erni, Arif Budi Sulistyo, Abdul Rahim, and Saleh Dwiyatno. "Fuzzy risk priority number assessment to detect midsole product defects." Jurnal Sistem dan Manajemen Industri 6, no. 1 (2022): 77–88. http://dx.doi.org/10.30656/jsmi.v6i1.4013.

Full text

Abstract:

The quality of midsole products significantly impacts the quality, durability, and comfort of the users of shoe products manufactured by ABC company. The high percentage of the average number of product defects based on product yield data for 12 months is 3.1% which exceeds the average number of product defects required by the company by 2%. There are six types of defects in the midsole: yellowing, porous, bubbles, broken, over left material and trimming. Three types of midsole product defects from six types of defects are the focus of improvement based on the Pareto concept, the name of the t

APA, Harvard, Vancouver, ISO, and other styles

8

Yahmadi, Raja, Kais Brik, and Faouzi ben Ammar. "Fuzzy risk priority number assessment for solar gel battery manufacturing defects." Engineering Failure Analysis 124 (June 2021): 105327. http://dx.doi.org/10.1016/j.engfailanal.2021.105327.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Yeh, Tsu-Ming, and Long-Yi Chen. "Fuzzy-based risk priority number in FMEA for semiconductor wafer processes." International Journal of Production Research 52, no. 2 (2013): 539–49. http://dx.doi.org/10.1080/00207543.2013.837984.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Kim, Doo-Hyun, Sung-Chul Kim, Jeon-Su Park, Eun-Jin Kim, and Eui-Sik Kim. "Analysis of Risk Priority Number for Grid-connected Energy Storage System." Journal of the Korean Society of Safety 31, no. 2 (2016): 10–17. http://dx.doi.org/10.14346/jkosos.2016.31.2.10.

Full text

APA, Harvard, Vancouver, ISO, and other styles

11

Zammori, Francesco, and Roberto Gabbrielli. "ANP/RPN: a multi criteria evaluation of the Risk Priority Number." Quality and Reliability Engineering International 28, no. 1 (2011): 85–104. http://dx.doi.org/10.1002/qre.1217.

Full text

APA, Harvard, Vancouver, ISO, and other styles

12

Földešiová, Daniela, Maroš Korenko, Martina Ferancová, and Pavol Kaplík. "Analysis of Risk Using FMEA." Advanced Materials Research 801 (September 2013): 81–85. http://dx.doi.org/10.4028/www.scientific.net/amr.801.81.

Full text

Abstract:

Failure mode and effects analysis (FMEA) was performed in RIBE Slovakia, k.s. (limited partnership) in Nitra, Slovakia. Analysis was done in the process of cold forming where potential errors (failures) were identified. Subsequently, there was assigned a mark in the FMEA form expressing severity, frequency and undetectability, and a risk priority number (RPN) was calculated. If the risk priority number (RPN) is too high, corrective measures are proposed and adopted in order for the risk to be minimized or completely eliminated.

APA, Harvard, Vancouver, ISO, and other styles

13

Gu, Ying Kui, Xin Chong Luo, and Shun Yun Tang. "Risk Priority Analysis for Engine Based on Fuzzy Weighted Geometric Mean." Advanced Materials Research 463-464 (February 2012): 1160–64. http://dx.doi.org/10.4028/www.scientific.net/amr.463-464.1160.

Full text

Abstract:

Fuzzy risk priority numbers (FRPNs) were proposed for assessment of the probabilistic risk by synthetically using fuzzy set theory, failure mode and effect analysis. The priority rank of failure modes is evaluated by fuzzy risk priority number in the fuzzy failure mode and effect analysis, where occurrence probability ranking, effect severity ranking and detection difficulty ranking are all fuzzy weighted geometric mean, and the FRPN can be computed using alpha-level set and optimization model. An engine example was provided to illustrate the proposed fuzzy FMEA and the detailed computational

APA, Harvard, Vancouver, ISO, and other styles

14

Xiao, Ningcong, Hong-Zhong Huang, Yanfeng Li, Liping He, and Tongdan Jin. "Multiple failure modes analysis and weighted risk priority number evaluation in FMEA." Engineering Failure Analysis 18, no. 4 (2011): 1162–70. http://dx.doi.org/10.1016/j.engfailanal.2011.02.004.

Full text

APA, Harvard, Vancouver, ISO, and other styles

15

Lee, Sung-Hun, Byeong-Chan Oh, and Sung-Yul Kim. "Decision of Maintenance Priority of Power System Using an Improved Risk Priority Number Methodology Based on Fuzzy Theory." TRANSACTION OF THE KOREAN INSTITUTE OF ELECTRICAL ENGINEERS P 70, no. 2 (2021): 94–101. http://dx.doi.org/10.5370/kieep.2021.70.2.094.

Full text

APA, Harvard, Vancouver, ISO, and other styles

16

Zheng, Haixia, and Yongchuan Tang. "Deng Entropy Weighted Risk Priority Number Model for Failure Mode and Effects Analysis." Entropy 22, no. 3 (2020): 280. http://dx.doi.org/10.3390/e22030280.

Full text

Abstract:

Failure mode and effects analysis (FMEA), as a commonly used risk management method, has been extensively applied to the engineering domain. A vital parameter in FMEA is the risk priority number (RPN), which is the product of occurrence (O), severity (S), and detection (D) of a failure mode. To deal with the uncertainty in the assessments given by domain experts, a novel Deng entropy weighted risk priority number (DEWRPN) for FMEA is proposed in the framework of Dempster–Shafer evidence theory (DST). DEWRPN takes into consideration the relative importance in both risk factors and FMEA experts.

APA, Harvard, Vancouver, ISO, and other styles

17

Ouédraogo, Aristide, Amela Groso, and Thierry Meyer. "Risk analysis in research environment – Part I: Modeling Lab Criticity Index using Improved Risk Priority Number." Safety Science 49, no. 6 (2011): 778–84. http://dx.doi.org/10.1016/j.ssci.2011.02.006.

Full text

APA, Harvard, Vancouver, ISO, and other styles

18

Chung, Hsiang-Yu, Tzu-Hao Ting, and Kuei-Hu Chang. "A Novel Intuitionistic Fuzzy Set-Based Risk Priority Number Method for Solving Chemical Experiment Risk Evaluation." Systems 12, no. 5 (2024): 155. http://dx.doi.org/10.3390/systems12050155.

Full text

Abstract:

Scientific experiments cover a wide range of fields—from basic to applied scientific research. Chemical experiments are the basis for cultivating chemical knowledge in scientific experiments and are an important way to cultivate scientific thinking and methods. However, due to the toxicity or flammability of the chemical substances in the experiments, hazardous events often lead to personal injuries and environmental damage. Exactly assessing risk factors and reducing the risk of hazards to protect the experimenters and ensure environmental safety are crucial in chemical experiments. However,

APA, Harvard, Vancouver, ISO, and other styles

19

Haievskyi, Volodymyr. "STUDY OF POSSIBILITIES OF JOINT APPLICATION OF PARETO ANALYSIS AND RISK ANALYSIS DURING CORRECTIVE ACTIONS." Technology transfer: fundamental principles and innovative technical solutions 4 (November 30, 2020): 22–24. http://dx.doi.org/10.21303/2585-6847.2020.001536.

Full text

Abstract:

Continuous improvement in the quality management system is based on corrective action. Corrective actions require the identification of priority defects that require priority elimination of the causes of occurrence. The traditional method of prioritization can be considered a Pareto chart, built by the number of identified inconsistencies. This technique makes it possible to prioritize the most frequently detected defects. However, defects that are rare can significantly outweigh those that are often encountered in their consequences. The defect risk is a complex indicator that simultaneously

APA, Harvard, Vancouver, ISO, and other styles

20

Kim, Kyungmee O., and Ming J. Zuo. "General model for the risk priority number in failure mode and effects analysis." Reliability Engineering & System Safety 169 (January 2018): 321–29. http://dx.doi.org/10.1016/j.ress.2017.09.010.

Full text

APA, Harvard, Vancouver, ISO, and other styles

21

Wang, Xiaochuan. "A human error risk priority number calculation methodology using fuzzy and TOPSIS grey." Open Mathematics 20, no. 1 (2022): 1554–66. http://dx.doi.org/10.1515/math-2022-0515.

Full text

Abstract:

Abstract In the implementation of management error proofing, enterprises need to carry out risk evaluation and ranking of management activities error, to determine error proofing improvement order. We note that management function failure is different from industrial failure, and the management activity error as its cause is also different from operational or device error, so the method generally used in industry is not suitable for the risk assessment of management activity error. To address this issue, this study integrates the FMEA (failure modes and effect analysis) with the ISO9001 standa

APA, Harvard, Vancouver, ISO, and other styles

22

Abdul Wahid Nuruddin. "KAJIAN ANALISA CACAT PROSES PRODUKSI GENTENG COR DENGAN METODE SIX SIGMA." Jurnal Teknik Mesin, Elektro dan Ilmu Komputer 3, no. 2 (2023): 34–46. http://dx.doi.org/10.55606/teknik.v3i2.1959.

Full text

Abstract:

Abstrak. Perusahaan ABC adalah perusahaan yang memproduksi genteng cor, dimana pada data produksi periode 3 bulan diketahui terdapat cacat produk berupa cacat retak, pecah dan keropos dengan prosentase sejumlah 13% dari total produksi. Permasalahan ini dalam penelitian dilakukan analisa lebih lanjut dengan metode six sigma dengan tahapan DMAIC (define, measure, analyze, improve dan control). Dari metode ini dalam analisa dan pembahasan diketahui akar penyebab cacat/kegagalan ditinjau dari 3 (tiga) variabel faktor yaitu proses, mesin dan metode. Dari ketiga variabel faktor diperoleh hadil anali

APA, Harvard, Vancouver, ISO, and other styles

23

Movahednejad, Farzaneh. "Exploration a New Model for Assessment the Environmental Risk of Dams in Construction Stage (Case Study: Balarood Dam, Khuzestan)." Nexo Revista Científica 34, no. 04 (2021): 1215–30. http://dx.doi.org/10.5377/nexo.v34i04.12650.

Full text

Abstract:

Dam projects have serious influences on environmental parameters; therefore, environment risk assessment of dam is one of the most significant aspects of environmental risk management in these projects. The present study was conducted with the aim of presenting a new model for assessing the environmental risk of dams in construction stage. After identifying environmental risks and using the EFMEA method, the risk priority number for each of the environmental aspects was calculated and classified. Then, to assess and prioritize the identified environmental risks, the VIKOR method was used. The

APA, Harvard, Vancouver, ISO, and other styles

24

Shin, Woonchul. "Risk Priority Number of Chemical Facilities by the Risk Assessment of Injury Analysis in the Chemical Plant." Journal of the Korean Institute of Gas 17, no. 4 (2013): 39–44. http://dx.doi.org/10.7842/kigas.2013.17.4.39.

Full text

APA, Harvard, Vancouver, ISO, and other styles

25

Silalahi, Yoseph Valentino, Badrul Munir, and Yudha Pratesa. "A New Approach to Risk Assessment Model and Management for Jetty Fuel Terminal Industrywide Using Risk Priority Number." Recent in Engineering Science and Technology 3, no. 01 (2025): 19–27. https://doi.org/10.59511/riestech.v3i01.92.

Full text

Abstract:

Jetty is an essential part of a fuel terminal and oil distribution process in terms of loading and unloading oil from and to tanker. Jetty has been widely used in fuel supply point facilities in archipelago countries like Indonesia. The increase in the importance given to maritime transportation has not only resulted in the development of the structure of safety issues but has also led to new investigations into the design of ships, the configuration of ports, and the operations conducted, all of which are essential components. However, it is not possible to ignore the risk inherent in jetty f

APA, Harvard, Vancouver, ISO, and other styles

26

Malakhova, Yu G., E. A. Zhirnova, and M. G. Melkozerov. "RISK-ORIENTED APPROACH TO QUALITY MANAGEMENT ON THE EXAMPLE OF THE PROCESS “METROLOGICAL EXAMINATION OF TECHNICAL DOCUMENTATION”." Kontrol'. Diagnostika, no. 281 (November 2021): 40–49. http://dx.doi.org/10.14489/td.2021.11.pp.040-049.

Full text

Abstract:

The issues of quality management at the enterprise of the machine-building industry are studied on the basis of process and risk-oriented approaches. A comprehensive approach to risk assessment is proposed, the advantage of which is the application of the principle of matching the significance of risk and the costs of its elimination in a comparative risk assessment. The features of the application of the method of analyzing the causes and consequences of failures, calculating the priority number of risks based on expert and statistical data are analyzed. The method of risk assessment is shown

APA, Harvard, Vancouver, ISO, and other styles

27

Tang, Yongchuan, Deyun Zhou, and Felix T. S. Chan. "AMWRPN: Ambiguity Measure Weighted Risk Priority Number Model for Failure Mode and Effects Analysis." IEEE Access 6 (2018): 27103–10. http://dx.doi.org/10.1109/access.2018.2836139.

Full text

APA, Harvard, Vancouver, ISO, and other styles

28

Yi, Byung-gueon, Dong-won Kim, and Bong-nam Noh. "Study on Minimum Security Requirement Using Risk Priority Number(SFRPN) for Secure Smart Factory." Journal of the Korea Institute of Information Security and Cryptology 26, no. 5 (2016): 1323–33. http://dx.doi.org/10.13089/jkiisc.2016.26.5.1323.

Full text

APA, Harvard, Vancouver, ISO, and other styles

29

Kadykova, Iryna, Yurii Ovsiuchenko, and Igor Chumachenkо. "METHOD OF STAKEHOLDERS’ IDENTIFICATION BASED ON THEIR VIEWS IN STRATEGIC MANAGEMENT OF SOCIAL PROGRAMS." Bulletin of NTU "KhPI". Series: Strategic management, portfolio, program and project management, no. 2(6) (August 3, 2022): 39–44. http://dx.doi.org/10.20998/2413-3000.2022.6.8.

Full text

Abstract:

There has been proposed the method of stakeholders’ identification in strategic management of social programs. It is designed to recognize and assess the strength of causal relationships of failure of social projects and programs. The method is based on the differentiation of stakeholders by their ideas, which is revealed in the example of inclusive educational projects. The concept of stakeholder priority number has been introduced. The matrix "risk priority number" / "stakeholder priority number" is offered. We have developed the method of stakeholders’ identification based on their views in

APA, Harvard, Vancouver, ISO, and other styles

30

Chang, Kuei-Hu, Tzu-Yi Fang, and Zong-Sian Li. "Using a Flexible Risk Priority Number Method to Reinforce Abilities of Imprecise Data Assessments of Risk Assessment Problems." Electronics 14, no. 3 (2025): 518. https://doi.org/10.3390/electronics14030518.

Full text

Abstract:

Risk priority number (RPN) is the most commonly used failure risk ranking method among all risk assessment methods. However, the traditional RPN method not only cannot handle incomplete information and hesitation information (such as hesitation information between the s5=Low and s6=Moderate) provided by experts, but it also does not consider the objective weights of risk assessment factors. These reasons will lead to biased conclusions, causing decision makers to make wrong judgments. To address the limitations of the traditional RPN technique, the aim of this paper is to propose the flexible

APA, Harvard, Vancouver, ISO, and other styles

31

Fadila, Nur Afni, Achfas Zacoeb, and Ming Narto Wijaya. "Occupational Accident Risk Analysis using Failure Mode and Analysis Method: A Case Study of X City Main Market Development Project." Journal of Mechanical, Civil and Industrial Engineering 4, no. 2 (2023): 47–61. http://dx.doi.org/10.32996/jmcie.2023.4.2.7.

Full text

Abstract:

Construction Projects are a work sector that has a high level of work accident risk. This is due to the lack of awareness of the importance of implementing a good Construction Safety Management System (SMKK) following applicable laws and regulations, often the application of the Construction Safety Management System on a project is considered only as a costly expense, not as an investment to prevent work accidents but only is considered to provide a level of loss from the project itself. But, in the construction of the Main Market of City X, there was a work accident; an analysis was carried o

APA, Harvard, Vancouver, ISO, and other styles

32

Sari, Ni Made Dwi Astiti, I. Ketut Satriawan, and Cokorda Anom Bayu Sadyasmara. "Analisis dan Strategi Mitigasi Risiko Produksi Teh Botol Sosro di PT. Sinar Sosro Pabrik Bali." JURNAL REKAYASA DAN MANAJEMEN AGROINDUSTRI 8, no. 2 (2020): 257. http://dx.doi.org/10.24843/jrma.2020.v08.i02.p10.

Full text

Abstract:

This study aims to identify risks, analyze the level of risk priority, and formulate alternative strategies and determine priority risk factors to minimize the risk of Sosro Teh Botol production. This study uses two methods, the Failure Mode and Effect Analysis (FMEA) method used to assess and determine risk priorities, and the Analytical Hierarchy Process (AHP) method is used to determine priority risk factors. At PT Sinar Sosro Bali Factory there are 18 risks of Teh Botol Sosro production, which are divided into 5 risk factors, namely: raw materials, water treatment, kitchen, bottling, and f

APA, Harvard, Vancouver, ISO, and other styles

33

Maitimu, Nil Edwin, and Marcy L. Pattiapon. "Penerapan Lean Constructon Pada Proyek PT. Pesona Graha Mandiri Ambon Guna Mereduksi Non Added Value Activity." ALE Proceeding 1 (July 18, 2021): 168–75. http://dx.doi.org/10.30598/ale.1.2018.168-175.

Full text

Abstract:

Abstrak Setiap pelaksanaan proyek konstruksi tidak lepas dari berbagai kendala ataupun kegagalan konstruksi, yang disebabkan oleh rendahnya kinerja ataupun produktivitas para tenaga kerja, perencanaan proyek yang kurang matang, anggaran yang membengkak, dan juga spesifikasi yang tidak sesuai.Walaupun kegagalan tersebut tidak dapat dilihat secara nyata, namun jika berlangsung dengan intensitas yang besar dan terus-menerus maka kegagalan tersebut dapat terakumulasi dan dampaknya akan terlihat pada akhir proyek. Tujuan dari penelitian ini adalah untuk mengidentifikasi aktivitas yang tergolong dal

APA, Harvard, Vancouver, ISO, and other styles

34

Franka Hendra Sukma, Roslina Mohammad, and Astuty Amrin. "The Risk Priority Number (RPN) At A Level Crossings Along The Railway Line In Indonesia." Journal of Advanced Research in Applied Sciences and Engineering Technology 25, no. 1 (2021): 7–18. http://dx.doi.org/10.37934/araset.25.1.718.

Full text

Abstract:

Indonesia has 7,464 km of railway lines along with the islands of Sumatra and Java. There are 5,239 level crossings along the railway line spread over 9 Operational Areas (Daop) and 4 Operations Divisions (Divre). According to data from the Directorate General of Indonesian Railways, throughout 2020, there have been 456 accidents at official and unofficial level crossings. Furthermore, according to statistical data, the number of accidents continues to increase every year. This study performs a risk assessment based on potential causes based on the frequency of occurrence, severity, and detect

APA, Harvard, Vancouver, ISO, and other styles

35

Wu, Xiaojun, and Jing Wu. "The Risk Priority Number Evaluation of FMEA Analysis Based on Random Uncertainty and Fuzzy Uncertainty." Complexity 2021 (February 26, 2021): 1–15. http://dx.doi.org/10.1155/2021/8817667.

Full text

Abstract:

The risk priority number (RPN) calculation method is one of the critical subjects of failure mode and effects analysis (FMEA) research. Recently, RPN research under a fuzzy uncertainty environment has become a hot topic. Accordingly, increasing studies have ignored the important impact of the random sampling uncertainty in the FMEA assessment. In this study, a fuzzy beta-binomial RPN evaluation method is proposed by integrating fuzzy theory, Bayesian statistical inference, and the beta-binomial distribution. This model can effectively realize real-time, dynamic, and long-term evaluation of RPN

APA, Harvard, Vancouver, ISO, and other styles

36

Na, Seong-Hyeon, Jeong-Mo Koo, and Gwang-Eun Lee. "Risk Priority Number Evaluation of Rotorcraft Hydraulic System Using Evidence Theory and Grey System Theory." Journal of the Korea Academia-Industrial cooperation Society 22, no. 7 (2021): 459–68. http://dx.doi.org/10.5762/kais.2021.22.7.459.

Full text

APA, Harvard, Vancouver, ISO, and other styles

37

Kamble, Swati N., and B. Rajiv. "Critical Analysis of Machine Condition Monitoring by Using Risk Priority Number and Analytical Hierarchy Process." Journal of Failure Analysis and Prevention 22, no. 2 (2022): 623–32. http://dx.doi.org/10.1007/s11668-022-01350-8.

Full text

APA, Harvard, Vancouver, ISO, and other styles

38

Ozilgen, Sibel. "Failure Mode and Effect Analysis (FMEA) for confectionery manufacturing in developing countries: Turkish delight production as a case study." Food Science and Technology 32, no. 3 (2012): 505–14. http://dx.doi.org/10.1590/s0101-20612012005000083.

Full text

Abstract:

The Failure Mode and Effect Analysis (FMEA) was applied for risk assessment of confectionary manufacturing, in whichthe traditional methods and equipment were intensively used in the production. Potential failure modes and effects as well as their possible causes were identified in the process flow. Processing stages that involve intensive handling of food by workers had the highest risk priority numbers (RPN = 216 and 189), followed by chemical contamination risks in different stages of the process. The application of corrective actions substantially reduced the RPN (risk priority number) val

APA, Harvard, Vancouver, ISO, and other styles

39

Maria, Theresa Meishichita, Ketut Satriawan I, and Anom Bayu Sadyasmara Cokorda. "Analysis and Mitigation Strategies of Croissant Production at PT XYZ." RA JOURNAL OF APPLIED RESEARCH 09, no. 01 (2023): RA JOURNALS. https://doi.org/10.5281/zenodo.7560919.

Full text

Abstract:

This purpose of this research is to identify risk, analyzes risk priorities, and formulate alternative strategies and determine the priority strategies that can be applied to minimize the risk in production process of croissant at PT XYZ. The methods used in this research were the Failure Mode and Effect Analysis (FMEA) method and Analytical Hierarchy Process (AHP). The FMEA method is used to asses and determine risk priorities, while the AHP method is used to determine the priority of risk mitigation strategies. Based on the result, there are 19 risks which are divided into 3 risk factors, na

APA, Harvard, Vancouver, ISO, and other styles

40

Борбаць, Николай, Nikolay Borbats, Вячеслав Мирошников, Vyacheslav Miroshnikov, Олег Горленко, and Oleg Gorlenko. "The development of fmea based on the use of fuzzy set theory." Bulletin of Bryansk state technical university 2014, no. 4 (2014): 153–63. http://dx.doi.org/10.12737/23059.

Full text

Abstract:

Considered the analysis of the types and effects of potential defects on the basis of application of fuzzy set theory.Proposed baths relevant linguistic variables.The example of calculation priority number of risk on the basis of mathematical operations with fuzzy numbers.

APA, Harvard, Vancouver, ISO, and other styles

41

Lubis, Devi Santa Maria, Sherly Gladys Jocom, and Leonardus Ricky Rengkung. "Analisis Risiko Usahatani Padi Organik Pada Kelompok Tani Mandiri Di Kelurahan Taratara Kecamatan Tomohon Barat Kota Tomohon." Journal of Agribusiness and Rural Development (Jurnal Agribisnis dan Pengembangan Pedesaan) 6, no. 4 (2024): 189–200. http://dx.doi.org/10.35791/agrirud.v6i4.57524.

Full text

Abstract:

This research aims to identify, assess and evaluate the main risks in organic rice farming in the Independ-ent Farmers Group in Taratara Village, West Tomohon District, Tomohon City. This research was carried out for three months from May to July 2024. The sampling method used was saturated sampling. The data used in this research is primary data by conducting a direct survey of farmer groups. Meanwhile, second-ary data was obtained from village officials. The analytical method used in this research is the Failure Mode and Effects Analysis (FMEA) method and the Pareto diagram. The research res

APA, Harvard, Vancouver, ISO, and other styles

42

Hill, W. Trey, John D. Raacke, and J. April Park. "Examining the Priority Heuristic in Conditions of Resource Need Levels." Psychological Reports 120, no. 5 (2017): 824–45. http://dx.doi.org/10.1177/0033294117709786.

Full text

Abstract:

Within the domain of risky decision making, there are a number of predictive models which are consistent with the hypothesis that human minds are molded for specific behavioral patterns based on environmental cues. Two models are the priority heuristic and risk sensitive foraging. Using a modified version of the traditional risky choice gambles paradigm, a study was designed to tease apart specific predictions made by each of these two models. It was discovered that the best explanation for choice behavior was consistent with risk sensitive foraging. This was true for risky preferences in gamb

APA, Harvard, Vancouver, ISO, and other styles

43

Nouri, Aria, Enrico Tessitore, Granit Molliqaj, et al. "Degenerative Cervical Myelopathy: Development and Natural History [AO Spine RECODE-DCM Research Priority Number 2]." Global Spine Journal 12, no. 1_suppl (2022): 39S—54S. http://dx.doi.org/10.1177/21925682211036071.

Full text

Abstract:

Study Design: Narrative review. Objectives: To discuss the current understanding of the natural history of degenerative cervical myelopathy (DCM). Methods: Literature review summarizing current evidence pertaining to the natural history and risk factors of DCM. Results: DCM is a common condition in which progressive arthritic disease of the cervical spine leads to spinal cord compression resulting in a constellation of neurological symptoms, in particular upper extremity dysfunction and gait impairment. Anatomical factors including cord-canal mismatch, congenitally fused vertebrae and genetic

APA, Harvard, Vancouver, ISO, and other styles

44

MACLEAN, LEONARD C., and ALEX RICHMAN. "AGGREGATE RISK MEASURES FOR DYNAMIC SYSTEMS FROM OPERATIONAL DATA." International Journal of Reliability, Quality and Safety Engineering 19, no. 04 (2012): 1250019. http://dx.doi.org/10.1142/s0218539312500192.

Full text

Abstract:

Complex systems are subject to failure with increased use and degradation. The risk process is the stochastic dynamic process of system failures and their severities. This paper considers aggregate risk measures for the risk process of complex systems in the context of stochastic ordering. The aggregation follows from the accumulation of losses from a series of failure events. The emphasis is on second-order risk measures which account for risk aversion as defined by concave utilities. A second-order measure termed the adjusted risk priority number (ARPN) is presented. The measure is construct

APA, Harvard, Vancouver, ISO, and other styles

45

Skovronskaya, Svetlana V., Nikolay A. Meshkov, Elena A. Valtseva, and Svetlana V. Ivanova. "Priority risk factors for population health in large industrial cities." Hygiene and sanitation 101, no. 4 (2022): 459–67. http://dx.doi.org/10.47470/0016-9900-2022-101-4-459-467.

Full text

Abstract:

Introduction. In large cities an assessment of the impact of environmental risk factors in addition to the levels of air pollution on the morbidity of the population and the medical and demographic situation should take into account the influence of the socio-economic living conditions of the population, both availability and quality of medical care. The purpose of the work is to conduct a comparative analysis, assess the informativeness of indicators of air quality, socio-economic living conditions of the population, the availability of medical care, and identify the priority of these factors

APA, Harvard, Vancouver, ISO, and other styles

46

Chen, Ying-Chu, and Pei-Yi Tsai. "Evaluating the operational risks of biomedical waste using failure mode and effects analysis." Waste Management & Research: The Journal for a Sustainable Circular Economy 35, no. 6 (2017): 593–601. http://dx.doi.org/10.1177/0734242x17700717.

Full text

Abstract:

The potential problems and risks of biomedical waste generation have become increasingly apparent in recent years. This study applied a failure mode and effects analysis to evaluate the operational problems and risks of biomedical waste. The microbiological contamination of biomedical waste seldom receives the attention of researchers. In this study, the biomedical waste lifecycle was divided into seven processes: Production, classification, packaging, sterilisation, weighing, storage, and transportation. Twenty main failure modes were identified in these phases and risks were assessed based o

APA, Harvard, Vancouver, ISO, and other styles

47

Harsanto, Renny Utaminingsih. "KAJIAN YURIDIS TERHADAP PERATURAN HUKUM DALAM ASPEK TRANSPARANSI TERHADAP RISIKO PADA LAYANAN PRIORITY BANKING." Veritas et Justitia 6, no. 2 (2020): 370–98. http://dx.doi.org/10.25123/vej.3381.

Full text

Abstract:

One of the new and innovative products offered in context of priority banking services is investment products. This research shall have a look at the transparency aspect of the risk management of this particular bank product offered to priority customers and will be conducted by a juridical normative method. In addition, the author also interviewed a number of key informants working in the banking industry at Bandung. The legal analysis conducted shows that while quite a number of rules and regulation in regard to risk management of bank investment products exist and are put in place, what it

APA, Harvard, Vancouver, ISO, and other styles

48

Tambunan, Erwin barita, Fitri Sulastri, and Pendi Rusman. "MENURUNKAN POTENSI RESIKO KECELAKAAN KERJA MENGGUNAKAN METODE SWIFT (THE STRUCTURED WHAT IF TECHNIQUE) DI LINI PROSES FORGING." Industry Xplore 7, no. 2 (2022): 194–202. http://dx.doi.org/10.36805/teknikindustri.v7i2.2887.

Full text

Abstract:

Analysis of Occupational Health and Safety Risks in Forging Forging Lines Using the SWIFT (The Structured What If) Method At PT. XYZ. PT. XYZ is a manufacturing company engaged in the production of household appliances such as spoons, forks and knives. During the second quarter of 2021, the number of work accident cases that occurred was 10 cases. For this reason, it is necessary to conduct research that aims to minimize the risk of hazards that occur in the forging line using the SWIFT method. The results of the study contained 13 potential hazards with a classification based on the RRN value

APA, Harvard, Vancouver, ISO, and other styles

49

Marpaung, Satria Buana, Din Aswan Amran Ritonga, and Ade Irwan. "ANALISA RISK PRIORITY NUMBER (RPN) TERHADAP KEANDALAN KOMPONEN MESIN THRESHER DENGAN MENGGUNAKAN METODE FMEA DI PT.XYZ." JiTEKH 9, no. 2 (2021): 74–81. http://dx.doi.org/10.35447/jitekh.v9i2.427.

Full text

Abstract:

PT. XYZ is a palm oil factory (PKS) producing crude palm oil (CPO). PT. XYZ has not implemented an effective engine maintenance system. The maintenance system that has been implemented is corrective maintenance, which is making repairs when there is damage. In addition, it is also assisted with planned maintenance that is scheduled every week to clean production machines. Therefore it is necessary to identify machine components that are susceptible to damage (critical components) and it is necessary to take special care measures for critical machine components by implementing a predective main

APA, Harvard, Vancouver, ISO, and other styles

50

Misbachul Munir. "Analisis Risk Priority Number Cacat Produk Cup Air Mineral dengan Pendekatan Seven Tools Di PT. XYZ." SKETSA BISNIS 8, no. 1 (2021): 63–71. http://dx.doi.org/10.35891/jsb.v8i1.2438.

Full text

Abstract:

Abstract PT. XYZ is a company engaged in producing bottled drinking water. To compete in the market, it is demanded to maintain the quality of the goods produced because of the quality products so that it has the aim of knowing the causes of significant product defects in the 240 ml cup packaging at PT. XYZ and knowing what factors cause defects in 240 ml cup packaging products at PT. XYZ Abstract is written in Indonesian as well as using the seven tools method. The results show that the cause of product defects is based on the cause and effect diagram of lid defects including: 1) leakin

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!