Log in

Relevant bibliographies by topics / Rod system / Journal articles

To see the other types of publications on this topic, follow the link: Rod system.

Journal articles on the topic 'Rod system'

Author: Grafiati

Published: 28 May 2022

Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 journal articles for your research on the topic 'Rod system.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

Revoor, Sateesh Kumar, Mittapally Nikhil, and Jatothu Sucharitha D. Anil. "Design and Modeling of Pull Rod and Push Rod Suspension System." International Journal of Trend in Scientific Research and Development Volume-3, Issue-3 (2019): 1074–77. http://dx.doi.org/10.31142/ijtsrd23263.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

An, Jing, Qun Guo, Li Li, and Zuoming Zhang. "Properties of Flicker ERGs in Rat Models with Retinal Degeneration." ISRN Ophthalmology 2012 (May 22, 2012): 1–11. http://dx.doi.org/10.5402/2012/346297.

Full text

Abstract:

Purpose. To describe the characteristics of rod and cone functions in rat models for congenital stationary night blindness (CSNB) and retinal cone dysfunction (RCD). Methods. Rod and cone function were isolated by recording the rod-/cone-driven flicker and blue light flicker electroretinograms (ERGs). Results. During dark adaptation, the amplitudes of flicker ERGs in CSNB rats were lower than those in control rats; the responses of RCD rats were similar to control rats. During light adaptation, the amplitudes of flicker ERGs in CSNB rats were reduced; whereas the responses of RCD rats were not

APA, Harvard, Vancouver, ISO, and other styles

3

陈, 炘. "Filter Rod Feed System Design." Instrumentation and Equipments 11, no. 04 (2023): 400–404. http://dx.doi.org/10.12677/iae.2023.114052.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Ellis, Harold. "The Hopkins Rod-Lens System." Journal of Perioperative Practice 17, no. 6 (2007): 272–74. http://dx.doi.org/10.1177/175045890701700605.

Full text

Abstract:

Surgeons have always been ready to adapt advances in technology into their practice. The discovery by Wilhelm Roentgen of X-rays in 1885 was applied within weeks of its publication to the diagnosis of fractures and the location of foreign bodies. The development of the electric light bulb by Edison enabled Max Nitze, Professor of Urology in Berlin, to develop the electrically illuminated cystoscope, which he patented in 1877. By 1911, Hugh Young used a cystoscope with a punch device to perform transurethral prostatectomy. Rapidly other electrically lit ‘scopes’ were introduced – the gastroscop

APA, Harvard, Vancouver, ISO, and other styles

5

Yan, Wenhui, Yinan Qu, Dong Xie, Heng Wu, and Yong Peng. "Nonlinear Finite Element Analysis of Rod String in Rod Pumping System." Journal of Physics: Conference Series 1654 (October 2020): 012059. http://dx.doi.org/10.1088/1742-6596/1654/1/012059.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Sateesh, Kumar Revoor, Nikhil Mittapally, and Sucharitha |. D. Anil Jatothu. "Design and Modeling of Pull Rod and Push Rod Suspension System." International Journal of Trend in Scientific Research and Development 3, no. 3 (2019): 1074–77. https://doi.org/10.31142/ijtsrd23263.

Full text

Abstract:

The main criterion of this project is to design a suspension system practically to a student formula vehicle and for systems, now loads are distributed to front and rear side. The stiffness of the spring is calculated by considering front and rear loads. The design of the spring, dash pot, rocker arms and push rod were done by LOTUS SHARK and modelling of these is done in SOLIDWORKS software. Later, the assembly of all parts and mono spring rocker arm front suspension system were designed racing cars. The dynamic loads are to be considered for the design of wheel assembly, frame, and transmiss

APA, Harvard, Vancouver, ISO, and other styles

7

Li, Rui, Ji Shi Guan, and Yu Qiu Liu. "Current Test System Design Based on LabVIEW." Applied Mechanics and Materials 678 (October 2014): 505–8. http://dx.doi.org/10.4028/www.scientific.net/amm.678.505.

Full text

Abstract:

As one of important reactor control systems, Rod Control Rod Position System (RGL) is used for driving the rod, lifting or inserting in order to achieve reactor neutron balance. It plays an important role on ensuring safety operation and improving load factor of nuclear station. This paper introduces a current test system for driving the rod based on LabVIEW, which including test principle, software and hardware design and conclusion. The result indicates this systemic function is correct and meets the requirements. It can be used for current test of RGL system.

APA, Harvard, Vancouver, ISO, and other styles

8

Han, Wen Wei, Wei Shi Han, and Qing Guo. "Comparative Analysis of the Control Rod Drive System." Advanced Materials Research 614-615 (December 2012): 1558–61. http://dx.doi.org/10.4028/www.scientific.net/amr.614-615.1558.

Full text

Abstract:

This article has systematically summarized the recent research situation of control rod system in China and comparatively analyzed the features of a variety of control rod drive systems on a basis of brief introduction of common types of control rod drive system. It has been proposed to that the hydraulic control rod drive system have a great potential in a wide application concerning on ships, warships power reactors and protable desalination system.

APA, Harvard, Vancouver, ISO, and other styles

9

Yadayna, Khofifatul. "Cigarette Rod Sorting System on Conveyors." Jurnal Jartel: Jurnal Jaringan Telekomunikasi 10, no. 1 (2020): 8–12. http://dx.doi.org/10.33795/jartel.v10i1.160.

Full text

Abstract:

Kretek cigarettes are a type of cigarette that is still in demand today. The manufacturing of kretek cigarettes in factories still has limitations, especially in the process weighing cigarettes per stick. From this problem, a tool is needed to separate cigarettes based on the weight of the cigarette that has been determined per stick. And the results of the cigarette weight sorter can be monitored via the website to reduce errors in the size of the clove cigarette. The method used in this study is to make a cigarette sorting tool using a conveyor with a DC servo motor component as a driving fo

APA, Harvard, Vancouver, ISO, and other styles

10

Chaparro, Alex, and Rockefeller S. L. Young. "Reading with the rod visual system." Applied Optics 28, no. 6 (1989): 1110. http://dx.doi.org/10.1364/ao.28.001110.

Full text

APA, Harvard, Vancouver, ISO, and other styles

11

Lai, S. K., and Xuhui Xiao. "Phase diagram of colloid-rod system." Journal of Chemical Physics 132, no. 4 (2010): 044905. http://dx.doi.org/10.1063/1.3298993.

Full text

APA, Harvard, Vancouver, ISO, and other styles

12

Greene, Rebecca H. "BWR control rod drive system aging." Nuclear Engineering and Design 147, no. 3 (1994): 321–35. http://dx.doi.org/10.1016/0029-5493(94)90215-1.

Full text

APA, Harvard, Vancouver, ISO, and other styles

13

Callow, JM, and L. Shao. "Air-clad optical rod daylighting system." Lighting Research & Technology 35, no. 1 (2003): 31–38. http://dx.doi.org/10.1191/1477153503li081oa.

Full text

APA, Harvard, Vancouver, ISO, and other styles

14

Schmidt, Z., and D. R. Doty. "System Analysis for Sucker-Rod Pumping." SPE Production Engineering 4, no. 02 (1989): 125–30. http://dx.doi.org/10.2118/15426-pa.

Full text

APA, Harvard, Vancouver, ISO, and other styles

15

Matviichuk, K. S. "Extended rod system moving in fluid." International Applied Mechanics 32, no. 7 (1996): 567–72. http://dx.doi.org/10.1007/bf02083993.

Full text

APA, Harvard, Vancouver, ISO, and other styles

16

Sha, Mo, Zheng-Qi Ding, Hu S. Ting, Liang-Qi Kang, Wen-Liang Zhai, and Hui Liu. "Biomechanical Study Comparing a New Combined Rod-plate System With Conventional Dual-rod and Plate Systems." Orthopedics 36, no. 2 (2013): e235-e240. http://dx.doi.org/10.3928/01477447-20130122-28.

Full text

APA, Harvard, Vancouver, ISO, and other styles

17

Kostiushko, I. A., and Yu M. Bazylevych. "Ziegler paradox in viscoelastic system stability problems." Technical mechanics 2025, no. 1 (2025): 103–11. https://doi.org/10.15407/itm2025.01.103.

Full text

Abstract:

This work is devoted to the study of the motion stability of a viscoelastic rod whose material obeys the Kelvin–Voigt law. Solutions to two problems of determining the rectilinear shape stability of a thin homogeneous rod are given. In problem I, the rod is restrained at one end, and a tracking force is applied to the other end such that it is always tangent to the rod line when the rod is bent. Such a force can be realized, for example, by installing a gunpowder rocket engine at the end of the rod. In problem II, the rod executes a uniformly accelerated motion under the action of a tracking f

APA, Harvard, Vancouver, ISO, and other styles

18

ZHENG, Yanhua, Hanliang BO, Duo DONG, and Jinhua WANG. "Experiment Study on Rod Ejection Accident of Hydraulic Control Rod Driving System." Journal of Nuclear Science and Technology 38, no. 12 (2001): 1133–37. http://dx.doi.org/10.1080/18811248.2001.9715147.

Full text

APA, Harvard, Vancouver, ISO, and other styles

19

Guo, Ke Xi, Hao Tang, and Qiong Cao. "Development of Connecting Rod Three-Dimensional Parametric Design System." Applied Mechanics and Materials 249-250 (December 2012): 523–26. http://dx.doi.org/10.4028/www.scientific.net/amm.249-250.523.

Full text

Abstract:

Linkage of the three-dimensional parametric design system established through SolidWorks and the secondary development of the CAD with the needs of enterprise. In this system, users can carry out the parametric design modeling of the connecting rod, virtual assembly and generate engineering drawings, such as design work, and to carry out the simulation connecting rod and piston. The system helps users to achieve the optimization design of the connecting rod, thus saving the cost of product development. The system has marketing value because of the decreased of connecting rod design cycle.

APA, Harvard, Vancouver, ISO, and other styles

20

Biswas, Jayanta Kumar, Sandipan Roy, Masud Rana, and Subhasish Halder. "A comparison of rigid, semi-rigid and flexible spinal stabilization devices: A finite element study." Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine 233, no. 12 (2019): 1292–98. http://dx.doi.org/10.1177/0954411919880694.

Full text

Abstract:

Pedicle-screw-based spinal fixation system has shown its success for treating degenerative disc disease-related back pain and spinal instability. In the last few decades, several non-fusion implants ( ‘flexible’ or ‘dynamic’ fixation) are developed for treating slight degenerate disc disease. The aim of this study is to characterize and compare the biomechanical responses of pedicle-screw-based fusion with various rod materials and a flexible spinal stabilization device on the lumbar spine (L3L5). Computed tomography scan-based finite element model and pedicle screw fixation with rigid rod mat

APA, Harvard, Vancouver, ISO, and other styles

21

Lei, Derong, Xiaodong Huang, Hui Zhang, Mancang Yao, Ruixiang Chen, and Junrong Liu. "Optimization and Application of Reciprocating Direct-Drive Electric Submersible Plunger Pump Lifting System in the Xinjiang Oilfield." Open Chemical Engineering Journal 13, no. 1 (2019): 68–80. http://dx.doi.org/10.2174/1874123101913010068.

Full text

Abstract:

Background: A reciprocating direct-drive electric submersible plunger pump (RDD-ESPP) lifting system is an innovative rodless lifting method, which uses a downhole linear motor to directly drive the plunger pump to lift the fluid. This method effectively overcomes the problems encountered in a conventional sucker rod pumping system, such as severe eccentric wear between the sucker rod and the tubing, higher energy consumption and frequent pump maintenance. Objective: In this manuscript, the objective is to propose a methodology on optimizing the working parameters of RDD-ESPP lifting system an

APA, Harvard, Vancouver, ISO, and other styles

22

Langbauer, Clemens, Rudolf Konrad Fruhwirth, and Lukas Volker. "Sucker Rod Antibuckling System: Development and Field Application." SPE Production & Operations 36, no. 02 (2021): 327–42. http://dx.doi.org/10.2118/205352-pa.

Full text

Abstract:

Summary When the oil price is low, cost optimization is vital, especially in mature oil fields. Reducing lifting costs by increasing the mean time between failure and the overall system efficiency helps to keep wells economical and increase the final recovery factor. A significant portion of artificially lifted wells currently use sucker rod pumping systems. Although its efficiency is in the upper range, there is still room for improvement compared with other artificial-lift systems. This paper presents the field-tested sucker rod antibuckling system (SRABS), which prevents buckling of the ent

APA, Harvard, Vancouver, ISO, and other styles

23

San, Win. "Optimization of Rod String Design for the Sucker Rod Pumping System in Mann Oil Field." International Journal of Trend in Scientific Research and Development 3, no. 5 (2019): 2306–11. https://doi.org/10.5281/zenodo.3591360.

Full text

Abstract:

This research aimed to present properly rod string design and to prevent rod failures in sucker rod pumping wells. The great majority of the world`s oil wells need some kinds of artificial lift methods to produce the oil to the surface. Sucker rod string should be properly designed to provide failure free pumping operation for an extended period of time. Rod string design usually aims at the determination of 1 the rod sizes to be used in the string, 2 the length of individual taper sections and 3 the rod material to be used and 4 the maximum allowable stress for rod string. If improper design

APA, Harvard, Vancouver, ISO, and other styles

24

Li, Yue, Jinrong Fang, Song Li, and Zhihui Niu. "Evaluation of the strength performance of the steering system of hybrid off-road vehicles." Vibroengineering Procedia 54 (April 4, 2024): 96–102. http://dx.doi.org/10.21595/vp.2023.23650.

Full text

Abstract:

In response to the strength performance requirements of the new energy Off road Vehicle steering system, this article analyzes and studies the strength performance and failure modes of the new energy Off road Vehicle steering rod based on a certain new energy Off road Vehicle model through simulation, bench experiments, and vehicle strength testing teams. Based on various vehicle misuse conditions, the force law of the steering rod under different vehicle driving conditions was analyzed, and a load spectrum for the steering rod strength bench test was developed to meet the actual vehicle usage

APA, Harvard, Vancouver, ISO, and other styles

25

Li, Zhi, Jianqiang Hu, Zhangxiang Zhou, et al. "Visual Inspection System for Uncoupling Status of Control-Rod Drive Rod in Nuclear Reactor." Sensors 22, no. 22 (2022): 8805. http://dx.doi.org/10.3390/s22228805.

Full text

Abstract:

Under some unexpected conditions, drive rods and control-rod assemblies may not be disconnected. If this situation is not detected, the control rod will be lifted out of the reactor core together with the upper reactor internals. This situation will seriously affect the follow-up work and reduce the economy and safety protection of the nuclear power plant. To ensure safety, the tripping status must be checked after tripping. Follow-up work can be carried out after checking and confirming that all drive rods are in the tripping status. There are many problems for traditional inspection methods,

APA, Harvard, Vancouver, ISO, and other styles

26

Ponnappan, Ravi K., Hassan Serhan, Brett Zarda, Ravi Patel, Todd Albert, and Alexander R. Vaccaro. "Biomechanical evaluation and comparison of polyetheretherketone rod system to traditional titanium rod fixation." Spine Journal 9, no. 3 (2009): 263–67. http://dx.doi.org/10.1016/j.spinee.2008.08.002.

Full text

APA, Harvard, Vancouver, ISO, and other styles

27

Fishman, Gerald A., and Neal S. Peachey. "Rod-cone Dystrophy Associated with a Rod System Electroretinogram Obtained Under Photopic Conditions." Ophthalmology 96, no. 6 (1989): 913–18. http://dx.doi.org/10.1016/s0161-6420(89)32800-4.

Full text

APA, Harvard, Vancouver, ISO, and other styles

28

Zhang, Man Lai, Rui Quan Liao, Zhang Qin, Pu Yong Yao, and Ze Chang Dong. "Study on the Suck Rod Design and Evaluation." Applied Mechanics and Materials 496-500 (January 2014): 773–76. http://dx.doi.org/10.4028/www.scientific.net/amm.496-500.773.

Full text

Abstract:

In order to satisfy the design and application requirements of the suck rod in the suck rod system, the method of design and evaluation for the multistage suck rod is studied. Through the coupling calculation of rod load and the reasonable centralizer spacing, the friction force and contact position between the centralizer and tubing are determined, and the analysis system for the multistage suck rod design and evaluation is established on the basis of well track for the equal strength design and stress comparative analysis. With the analysis system, a fast and effective tool is provided for t

APA, Harvard, Vancouver, ISO, and other styles

29

Vanmaercke, Simon, Gert Van den Eynde, Engelbert Tijskens, and Yann Bartosiewicz. "Development of a Secondary SCRAM System for Fast Reactors and ADS Systems." Science and Technology of Nuclear Installations 2012 (2012): 1–9. http://dx.doi.org/10.1155/2012/351985.

Full text

Abstract:

One important safety aspect of any reactor is the ability to shutdown the reactor. A shutdown in an ADS can be done by stopping the accelerator or by lowering the multiplication factor of the reactor and thus by inserting negative reactivity. In current designs of liquid-metal-cooled GEN IV and ADS reactors reactivity insertion is based on absorber rods. Although these rod-based systems are duplicated to provide redundancy, they all have a common failure mode as a consequence of their identical operating mechanism, possible causes being a largely deformed core or blockage of the rod guidance c

APA, Harvard, Vancouver, ISO, and other styles

30

Slavin, V. S., S. M. Vershigora, and V. S. Panteleev. "New production system for precision hexahedral rod." Steel in Translation 37, no. 2 (2007): 164–66. http://dx.doi.org/10.3103/s0967091207020209.

Full text

APA, Harvard, Vancouver, ISO, and other styles

31

TANAKA, Kyoji, Yuko SUDA, Hiroyuki MIYAUCHI, and Minato UEMATSU. "PERFORMANCE OF ROD PILED-UP DRAINAGE SYSTEM." Journal of Structural and Construction Engineering (Transactions of AIJ) 66, no. 541 (2001): 65–72. http://dx.doi.org/10.3130/aijs.66.65_2.

Full text

APA, Harvard, Vancouver, ISO, and other styles

32

Lima, Fábio M. S. "A Coincidence in the Spring–Rod System." Physics Teacher 63, no. 1 (2025): 46–48. https://doi.org/10.1119/5.0159121.

Full text

APA, Harvard, Vancouver, ISO, and other styles

33

Jiang Yueyuan, Wang Wenran, Yang Nianzu, and Li Dezhong. "Combination coding control rod position-indicating system." Nuclear Engineering and Design 167, no. 2 (1996): 223–27. http://dx.doi.org/10.1016/s0029-5493(96)01291-5.

Full text

APA, Harvard, Vancouver, ISO, and other styles

34

Lou, E., D. L. Hill, J. V. Raso, M. J. Moreau, and J. K. Mahood. "Instrumented rod rotator system for spinal surgery." Medical & Biological Engineering & Computing 40, no. 4 (2002): 376–79. http://dx.doi.org/10.1007/bf02345068.

Full text

APA, Harvard, Vancouver, ISO, and other styles

35

Z Taj, S., S. M Rizwan, B. M Alkali, D. K Harrison, and G. Taneja. "Performance Analysis of a Rod Breakdown System." International Journal of Engineering & Technology 7, no. 3.4 (2018): 243. http://dx.doi.org/10.14419/ijet.v7i3.4.16782.

Full text

Abstract:

The paper presents performance analysis of a rod breakdown system consisting of two machines operating in parallel. Ten years maintenance data of the system depicts three maintenance practices: repair, major preventive maintenance and minor preventive maintenance. Machines are repaired on normal failures, whereas major/minor preventive maintenance is carried out at scheduled basis. The machines are queued for major preventive maintenance. An operative machine requires a cooling period of half hour before undergoing major preventive maintenance. Repair is prioritized over major preventive maint

APA, Harvard, Vancouver, ISO, and other styles

36

El Dafrawy, Mostafa H., Owoicho Adogwa, Adam M. Wegner, et al. "Comprehensive classification system for multirod constructs across three-column osteotomies: a reliability study." Journal of Neurosurgery: Spine 34, no. 1 (2021): 103–9. http://dx.doi.org/10.3171/2020.6.spine20678.

Full text

Abstract:

OBJECTIVEIn this study, the authors’ goal was to determine the intra- and interobserver reliability of a new classification system that allows the description of all possible constructs used across three-column osteotomies (3COs) in terms of rod configuration and density.METHODSThirty-five patients with multirod constructs (MRCs) across a 3CO were classified by two spinal surgery fellows according to the new system, and then were reclassified 2 weeks later. Constructs were classified as follows: the number of rods across the osteotomy site followed by a letter corresponding to the type of rod

APA, Harvard, Vancouver, ISO, and other styles

37

Zhiyuan Ren, Zhiyuan Ren, and Jianqiang Zhu Jianqiang Zhu. "Flow field analysis of the rod amplifier with water thermal recovery system." Chinese Optics Letters 12, s2 (2014): S21408–321410. http://dx.doi.org/10.3788/col201412.s21408.

Full text

APA, Harvard, Vancouver, ISO, and other styles

38

Ma, Simin, Bo Tang, Xiaoming Jin, Changyu Han, Songhua Huang, and Chao Ma. "A novel automatic ultrasonic inspection system for damaged fuel rods." Journal of Physics: Conference Series 3019, no. 1 (2025): 012053. https://doi.org/10.1088/1742-6596/3019/1/012053.

Full text

Abstract:

Abstract The fuel assembly is the core component of the nuclear reactor, which may be damaged after long-term operation. Under the pressure difference between the inner and outer cladding, the coolant will penetrate the fuel rod. A set of ultrasonic inspection systems for damaged fuel rods was developed based on the characteristics that the plate wave would leak into the internal medium when propagating in the damaged fuel rod cladding, resulting in a significant attenuation of energy. This paper introduces the composition of the relevant system and introduces technological innovation. The tes

APA, Harvard, Vancouver, ISO, and other styles

39

Hu, Shu Lan. "On Piston Rod System Operation Analysis and Piston Structure Optimization Research." Applied Mechanics and Materials 513-517 (February 2014): 4147–51. http://dx.doi.org/10.4028/www.scientific.net/amm.513-517.4147.

Full text

Abstract:

The transmission components of internal combustion engine power are piston rod structure. The quality of the structure design has direct impact on the whole machine. Alternating thermal load and mechanical load are pistons, which are under the worst piston rod system working condition. This article performs operation analysis piston rod structure through the corresponding application of Pro/Mechanica and Pro/Mechanism, so that the stress and piston dangerous stress concentration location shall be determined based on piston structure optimization design. This way leads to quality improvement of

APA, Harvard, Vancouver, ISO, and other styles

40

Sartika, Erwani Merry, and Arief Darmawan. "Simulation for determining the rod pump system parameter values using finite difference method." Indonesian Journal of Electrical Engineering and Computer Science 22, no. 1 (2021): 137–45. https://doi.org/10.11591/ijeecs.v22.i1.pp137-145.

Full text

Abstract:

Lifting petroleum to the surface requires a mechanism called an artificial lift. This mechanism is useful for increasing the flow of fluids from a well. One that uses this method is the rod pump. The rod pump system needed the appropriate design (through the determination of the value of the parameters that affect) so that the pump runs optimally. But changing the appropriate design in real terms is not economically and time-efficient. The ideal rod pump system analysis procedure is to take downhole data (in the well) which is commonly called a pump card. A pump card calculation simulation is

APA, Harvard, Vancouver, ISO, and other styles

41

Liu, Yi, and Heng Liu. "Dynamic behaviors of three-dimensional rod-disk rotor rolling bearing system." Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-body Dynamics 232, no. 1 (2017): 21–31. http://dx.doi.org/10.1177/1464419317705987.

Full text

Abstract:

A typical rod-disk rotor is meshed by three-dimensional solid elements. The stability features, whirling motions and frequency spectrums of 3D rod-disk rotor rolling bearing system are investigated by combining nonlinear analysis method and finite element method. Meanwhile, an identical 1D rod-disk rotor system is introduced for comparison. With the support of the ball bearing, the stability region of 1D and 3D rod-disk rotors shows good consistency at lower speed and has obvious differences at higher speed. However, 3D rotor has smaller bending deformation because 3D solid elements can restri

APA, Harvard, Vancouver, ISO, and other styles

42

Kongnok, Rungphet, Thanakorn Pummaitong, and Boonyang Plangklang. "Five-Year Performance of an ESE Lightning Protection System for a Large Scale PV Power Plant in Thailand." Symmetry 13, no. 11 (2021): 2106. http://dx.doi.org/10.3390/sym13112106.

Full text

Abstract:

This article presents a five-year performance review of an early streamer emission (ESE) air terminal lightning protection system for a large scale PV power plant in Thailand. The comparison effect of a Franklin lightning protection system and the ESE lightning protection system was analyzed for the PV power plant. The ESE lightning protection system was selected to be implemented in the PV power plant. The capacity of the PV power plant studied was 8 MWp on an area of 150,000 square meters in the Nong Ya Plong district, Phetchaburi province, Western Thailand. A Franklin lightning rod type was

APA, Harvard, Vancouver, ISO, and other styles

43

Wang, Dongyu, and Hongzhao Liu. "Prediction and Analysis of Polished Rod Dynamometer Card in Sucker Rod Pumping System with Wear." Shock and Vibration 2018 (November 1, 2018): 1–10. http://dx.doi.org/10.1155/2018/4979405.

Full text

Abstract:

In the oil production process, the wear of friction pairs in sucker rod pumping installations will increase over time, which leads to the failure of the sucker rod pumping system. In order to study the effect of wear on the sucker rod pumping system, a wear model between the plunger and pump barrel was established. By analyzing the wear law, the wear volume and wear time of the pump barrel were calculated under abrasive wear. The forces of the sucker rod microunit were analyzed, and the wave equation of the sucker rod was established. Based on the given boundary and initial conditions, a mixed

APA, Harvard, Vancouver, ISO, and other styles

44

Franzen, Anne T., and José Natário. "Linear relativistic thermoelastic rod." Journal of Hyperbolic Differential Equations 17, no. 04 (2020): 863–82. http://dx.doi.org/10.1142/s0219891620500289.

Full text

Abstract:

We derive and analyze the linearized hyperbolic equations describing a relativistic heat-conducting elastic rod. We construct a decreasing energy integral for these equations, compute the associated characteristic propagation speeds and prove that the solutions decay in time by using a Fourier decomposition. For comparison purposes, we obtain analogous results for the classical system with heat waves, in which the finite propagation speed of heat is kept but the other relativistic terms are neglected and also for the usual classical system.

APA, Harvard, Vancouver, ISO, and other styles

45

Navale, Pramod, and Sameer Katekar. "Validation of Natural Frequency for Tie Rod of a Steering System using Finite Element Analysis and Experimental Methods." International Journal for Research in Applied Science and Engineering Technology 11, no. 2 (2023): 139–54. http://dx.doi.org/10.22214/ijraset.2023.48990.

Full text

Abstract:

Abstract: This report is about the optimization of a tie rod, which is a crucial part of a car's steering system. The tie rod is typically made of cast iron, but in this study, we also used aluminum to make the tie rod. We analyzed the performance of the tie rod using different methods such as theoretical calculations, experiments, and computer simulations. We compared the results of the aluminum tie rod with the traditional cast iron tie rod, and evaluated them based on cost and weight. Our calculations showed that aluminum tie rod is a better option as it is lighter and cheaper than the cast

APA, Harvard, Vancouver, ISO, and other styles

46

Merry Sartika, Erwani, and Arief Darmawan. "Simulation for determining the rod pump system parameter values using finite difference method." Indonesian Journal of Electrical Engineering and Computer Science 22, no. 1 (2021): 137. http://dx.doi.org/10.11591/ijeecs.v22.i1.pp137-145.

Full text

Abstract:

<p>Lifting <span>petroleum to the surface requires a mechanism called an artificial lift. This mechanism is useful for increasing the flow of fluids from a well. One that uses this method is the rod pump. The rod pump system needed the appropriate design (through the determination of the value of the parameters that affect) so that the pump runs optimally. But changing the appropriate design in real terms is not economically and time-efficient. The ideal rod pump system analysis procedure is to take downhole data (in the well) which is commonly called a pump card. A pump card calcu

APA, Harvard, Vancouver, ISO, and other styles

47

Stockman, Andrew, Lindsay T. Sharpe, Klaus Rüther, and Knut Nordby. "Two signals in the human rod visual system: A model based on electrophysiological data." Visual Neuroscience 12, no. 5 (1995): 951–70. http://dx.doi.org/10.1017/s0952523800009500.

Full text

Abstract:

AbstractIn the human rod visual system, self-cancellation of flicker signals is observed at high rod intensity levels near 15 Hz, both perceptually and in the electroretinogram (ERG). This and other evidence suggests that two rod signals are transmitted through the human retina with different speeds of transmission. Here we report a series of flicker ERG recordings from a normal observer and an observer who lacks cone vision. From these results, we propose a quantitative model of the two rod signals, which assumes (1) that the amplitude of the slow signal grows linearly with log intensity but

APA, Harvard, Vancouver, ISO, and other styles

48

Li, Xinghai, Kai Feng, Jie Yuan, et al. "Thermal Stress Compensation for an Aircraft Engine Duct System Based on a Structural Redesign of Tie Rods." Applied Sciences 13, no. 17 (2023): 9519. http://dx.doi.org/10.3390/app13179519.

Full text

Abstract:

The reliability of the aircraft engine duct system is of paramount importance as it directly affects the safety of the aircraft, particularly under high-temperature and high-pressure cycles. In this study, ANSYS Workbench was used for finite element analysis, and a sleeve-type tie rod structure was proposed to address the critical problem of tie rod tearing during the operation of the duct system, thereby optimizing thermal stress compensation for the duct system. The research results show the following: (1) The anchor of the traditional tie rod imposes displacement constraints on the thermal

APA, Harvard, Vancouver, ISO, and other styles

49

Ahmad, Arfah, Ahmad Tarmizi Azily, Anis Niza Ramani, Intan Azmira Wan Abdul Razak, and Suziana Ahmad. "Experimental Study on the Ground Resistance Reduction Based on Different Types of Grounding Rod." Applied Mechanics and Materials 793 (September 2015): 105–9. http://dx.doi.org/10.4028/www.scientific.net/amm.793.105.

Full text

Abstract:

Grounding of electrical installation is primarily concerned with ensuring safety. The main purpose of grounding is to channel the fault current straightly to the earth. To produce a good grounding system, the value of earth resistance must be reduced as low as possible. Otherwise, current may flows through to those who touch the damage electrical equipment instead of flowing through grounding system. In this project, a 3 meter length of copper, galvanized iron and pure steel rod were installed in formatting of grounding system. The installation of the grounding rods was based on the fall of po

APA, Harvard, Vancouver, ISO, and other styles

50

Narvydas, Evaldas, Romualdas Dundulis, and Nomeda Puodžiūnienė. "Rod End Stress Analysis for Hydraulic Cylinder of Live Floor Conveying System." Mechanics 26, no. 2 (2020): 108–13. http://dx.doi.org/10.5755/j01.mech.26.2.24675.

Full text

Abstract:

Rod end failures are rare but still happening in the rod eyes of hydraulic cylinders. Stress analysis at the location of failure is very important for design improvement and identification the causes of failure. Performed finite element stress analysis shoved a preference of equivalent stress located at 1 mm distance from the weld toe comparing to the maximal stresses calculated at the root of 1 mm radius artificial fillet. Mounting of the hydraulic cylinder that creates a possible misalignment between the resultant reaction force and the rod, will create a stress increase in the external ring

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!