Books on the topic 'Rolling elements'

Ying, Wang. Failure modes of silicon nitride rolling elements with ring crack defects. Poole: Bournemouth University, 2001.

Kang, Jinsheng. Influences of surface quality on the rolling contact fatique behaviour of ceramics: An investigation into the relationship between the finishing process, surface quality and failure modes of advanced Si3N4 rolling elements. Poole: Bournemouth University, 2001.

Karaszewski, Waldemar. Badanie wpływu wybranych czynników na rwałość ceramicznych elementów łożysk tocznych: Research on the effects of selected factors on the life of ceramic rolling bearing elements. Gdańsk: Wydawnictwo Politechniki Gdańskiej, 2013.

Takeuchi, Yoshimi R., and William F. Mandler, eds. Rolling Element Bearings. 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959: ASTM International, 2012. http://dx.doi.org/10.1520/stp1542-eb.

R, Takeuchi Yoshimi, and Mandler William F, eds. Rolling element bearings. West Conshohocken, PA: ASTM International, 2012.

Changsen, Wan. Analysis of rolling element bearings. London: Mechanical Engineering Publications, 1991.

Hu, Zhongmin. Finite element modelling of the ring-rolling process. Birmingham: University of Birmingham, 1995.

Zaretsky, Erwin V. Comparison of life theories for rolling-element bearings. [Washington, D.C.]: National Aeronautics and Space Administration, 1995.

Zaretsky, Erwin V. Effects of surface removal on rolling-element fatigue. [Washington, D.C.]: National Aeronautics and Space Administration, 1987.

Wen, Shuwen. Elastic-plastic finite-element modelling of section rolling. Birmingham: University of Birmingham, 1994.

Zaretsky, Erwin V. Comparison of life theories for rolling-element bearings. [Washington, D.C.]: National Aeronautics and Space Administration, 1995.

Mutale, Chanda. Finite element simulation of plane strain hot rolling processes. Ottawa: National Library of Canada, 1994.

Ho, M. H. L. Rolling element bearing assessment using impulsive vibration energy measurement. Manchester: UMIST, 1998.

Rajendra, Singh. Vibration transmission through rolling element bearings in geared rotor systems. Cleveland, Ohio: Lewis Research Center, 1990.

Singh, Rajendra. Vibration transmission through rolling element bearings in geared rotor systems. Washington, D.C: National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Division, 1990.

Zaretsky, Erwin V. Selection [of] rolling-element bearing steels for long-life application. [Washington, D.C.]: National Aeronautics and Space Administration, 1986.

Zaretsky, Erwin V. Selection [of] rolling-element bearing steels for long-life application. [Washington, D.C.]: National Aeronautics and Space Administration, 1986.

Zaretsky, Erwin V. Selection [of] rolling-element bearing steels for long-life application. [Washington, D.C.]: National Aeronautics and Space Administration, 1986.

Zaretsky, Erwin V. Selection [of] rolling-element bearing steels for long-life application. [Washington, D.C.]: National Aeronautics and Space Administration, 1986.

Maznev, Aleksandr, and Oleg Shatnev. Electric apparatus and circuits of rolling stock. ru: INFRA-M Academic Publishing LLC., 2020. http://dx.doi.org/10.12737/1014641.

Lim, Tian. A study of profile ring rolling using a finite-element method. Birmingham: University of Birmingham, 1999.

Singh, Rajendra. Vibration transmission through rolling element bearings in geared rotor system.: Final report. [Columbus, Ohio ?]: Ohio State University, 1990.

Aramaki, Kazuaki. Elastic-plastic finite-element analysis of three-dimensional deformation in flat rolling. Birmingham: University of Birmingham, 1991.

Pepper, Stephen V. A rolling element tribometer for the study of liquid lubricants in vacuum. Washington, D.C: National Aeronautics and Space Administration, 1996.

Tsuzaki, Takumi. Prediction of edge cracking in cold rolling using the finite-element method. Birmingham: University of Birmingham, 1993.

Liu, Cai. Simulation of strip and slab rolling using an elastic-plastic finite-element method. Birmingham: University of Birmingham, 1985.

Rudkins, Neil Thomas. A study of surface friction to improve the finite-element simulation of hot rolling. Birmingham: University of Birmingham, 1997.

Duan, Xinjian. Some problems in hot rolling of al-alloys solved by the finite element method. Poole: Bournemouth University, 2001.

Umara, Baba. Transportation in rural Nigeria and the development of simply manufactured rolling-element bearings for small scale rural vehicles. [s.l.]: typescript, 1992.

Tomlinson, Jim. Rolling Back the State. Oxford University Press, 2017. http://dx.doi.org/10.1093/oso/9780198786092.003.0004.

George C. Marshall Space Flight Center., ed. An evaluation of bearings operating in a cryogenic environment with silicon nitride rolling elements. [Marshall Space Flight Center, Ala.]: National Aeronautics and Space Administration, George C. Marshall Space Flight Center, 1991.

A Qualitative Analysis of the Elements Required for the Successful Implementation of the 'Rolling Down-Select Strategy'. Storming Media, 1997.

Changsen, Wan. Analysis of Rolling Element Bearings. Wiley, 2005.

Modeling of rolling element bearing mechanics. Sacramento, Calif: Aerojet Propulsion Division ; [Huntsville, Ala., 1991.

Rolling Element Bearings (IMechE Seminar Publication). Professional Engineering Publishing, 1990.

M, Greenhill Lyn, and United States. National Aeronautics and Space Administration., eds. Modelling of rolling element bearing mechanics: Theoretical manual. Sacramento, CA: GenCorp Aerojet, 1994.

Modeling of rolling element bearing mechanics--computer program updates. MSFC, Ala: National Aeronautics and Space Administration, Marshall Space Flight Center, 1997.

Design and lubrication of high-speed rolling element-bearings. [Washington, D.C: National Aeronautics and Space Administration, 1985.

P, Fleming David, and NASA Glenn Research Center, eds. Rotordynamic influence on rolling element bearing selection and operation. [Cleveland, Ohio]: National Aeronautics and Space Administration, Glenn Research Center, 2001.

Fastners; Rolling Element Bearings (Annual Book of Astm Standards 2002). Astm Intl, 2002.

1937-, Huston Ronald L., Oswald Fred B, United States. Army Aviation Research and Technology Activity., and United States. National Aeronautics and Space Administration., eds. Contact stresses in meshing spur gear teeth: Use of an incremental finite element procedure. [Washington, D.C.?]: National Aeronautics and Space Administration, 1992.

A rolling element tribometer for the study of liquid lubricants in vacuum. [Washington, DC]: National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Program, 1996.

2003 Astm Vol. 1.08: Iron And Steel Products: Fasteners; Rolling Element Bearings. Astm Intl, 2003.

Fasteners; Rolling Element Bearings (Annual Book of a S T M Standards Volume 0108). Astm Intl, 2002.

Rolling element bearings towards the 21st century: Papers presented by the Tribology Group of the Institution of Mechanical Engineers and held at the Institution of Mechanical Engineers on 16 November 1990. London: Published for the Institution of Mechanical Engineers by Mechanical Engineering Publications, 1990.

Rolling element bearings--towards the 21st century: Papers presented at a seminar organized by the Tribology Group of the Institution of Mechanical Engineers, and held at the Institution of Mechanical Engineers on 16 November 1990. London: published by Mechanical Engineering Publications for the Institution of Mechanical Engineers, 1990.