Contents
Academic literature on the topic 'Rotary Club (Munich, Germany)'
Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles
Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Rotary Club (Munich, Germany).'
Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.
You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.
Journal articles on the topic "Rotary Club (Munich, Germany)"
1
Nur, Bilge Gulsum, Evren Ok, Mustafa Altunsoy, Mehmet Tanriver, and Ismail Davut Capar. "Fracture strength of roots instrumented with three different single file systems in curved root canals." European Journal of Dentistry 09, no. 02 (April 2015): 189–93. http://dx.doi.org/10.4103/1305-7456.156804.
Full textAbstract:
ABSTRACT Objective: The aim of this study was to compare the fracture strength of roots instrumented with three different single file rotary systems in curved mesial root canals of maxillary molars. Materials and Methods: Curvatures of 25°–35° on mesial roots of 60 maxillary molar teeth were sectioned below the cementoenamel junction to obtain roots 11 mm in length. The roots were balanced with respect to buccolingual and mesiodistal diameter and weight. They were distributed into three experimental groups and one control group (no instrumentation) (n = 15): Reciproc rotary file (R25, VDW, Munich, Germany), WaveOne Primary rotary file (Dentsply Tulsa Dental Specialties, Tulsa, UK) and OneShape (Micro-Mega, Besancon, France) rotary file. Vertical load was applied until fracture occurred. Data were statistically analyzed using one-way analysis of variance test (P < 0.05). Results: The mean fracture load was 412 ± 72 Newton (N) for the control group, 395 ± 69 N for the Reciproc group, 373 ± 63 N for the WaveOne group and 332 ± 68 N for the OneShape group. The fracture load differences among three experimental groups were not statistically significant (P > 0.05.) Whereas, the fracture loads of control and OneShape groups were significantly different (P = 0.012). Conclusions: Fracture resistance of the roots instrumented with WaveOne and Reciproc file systems were similar to the control group whereas it was observed that OneShape rotary file systems enhance the fracture strength of standardized curved roots when compared with the control group.
2
Kesim, Bertan, Burak Sagsen, and Tugrul Aslan. "Evaluation of dentinal defects during root canal preparation using thermomechanically processed nickel-titanium files." European Journal of Dentistry 11, no. 02 (April 2017): 157–61. http://dx.doi.org/10.4103/ejd.ejd_254_16.
Full textAbstract:
ABSTRACT Objective: The aim of this study was to compare the incidence of root cracks after root canal instrumentation with thermomechanically processed nickel-titanium (Ni-Ti) files with different instrumentation kinematics. Materials and Methods: A total of 150 extracted mandibular premolars with mature apices and straight root canals were divided into five groups and used in this study. In Group 1, 30 teeth were prepared using hand K-files and assigned to control group, Group 2 was instrumented using K3XF Rotary files (SybronEndo, Glendora, CA, USA) with continuous rotary motion. The teeth in Group 3 were instrumented by ProTaper Next (Dentsply Maillefer, Ballaigues, Switzerland) rotary files which make asymmetric rotary motion, In Group 4, teeth were instrumented by RECIPROC (VDW, Munich, Germany) with reciprocation motion and in Group 5, teeth were instrumented by Twisted File (TF) Adaptive (SybronEndo, Orange, CA, USA) files that use combination of continuous rotation and reciprocation motion (n = 30/per group). All the roots were horizontally sectioned 3, 6, and 9 mm from the apex with a low speed saw under water cooling. Then, the slices were examined through a stereomicroscope to determine the presence of dentinal microcracks.Results: For the apical (3-mm) and coronal (9-mm) sections, the ProTaper Next and TF Adaptive produced significantly more cracks than the hand files, RECIPROC, and K3XF (P < 0.05). There was no significant difference between the experimental groups and control group at the 6-mm level (P > 0.05). Conclusions: Within the limitations of this in vitro study, all thermal-treated Ni-Ti instruments and hand files caused microcracks in root canal dentin.
3
Alakabani, Tarek-Fahed, Vicente Faus-Llácer, Ignacio Faus-Matoses, Celia Ruiz-Sánchez, Álvaro Zubizarreta-Macho, Salvatore Sauro, and Vicente Faus-Matoses. "The Efficacy of Rotary, Reciprocating, and Combined Non-Surgical Endodontic Retreatment Techniques in Removing a Carrier-Based Root Canal Filling Material from Straight Root Canal Systems: A Micro-Computed Tomography Analysis." Journal of Clinical Medicine 9, no. 6 (June 25, 2020): 1989. http://dx.doi.org/10.3390/jcm9061989.
Full textAbstract:
The aim of this study is to analyze and compare the efficacy of three non-surgical endodontic retreatment techniques in removing a carrier-based root canal filling material from straight root canal systems. The study was performed on 99 single-rooted extracted teeth using the ProTaper Gold endodontic rotary system up to the F2 file (Dentsply Maillefer, Baillagues, Switzerland), which were sealed with GuttaCore (Dentsply Maillefer, Ballaigues, Switzerland) and AH plus epoxy resin sealer (Dentsply DeTrey, Konstanz, Germany) and randomly assigned to the following non-surgical retreatment techniques: ProTaper Retreatment endodontic rotary instruments (D1–D3 files, Dentsply Maillefer, Ballaigues, Switzerland; n = 33, PTR), Reciproc Blue endodontic reciprocating instrument (R50, VDW, Munich, Germany; n = 33, RCB50), and a combined root canal retreatment technique between Gates-Glidden drills (sizes #3 and #2, Dentsply Maillefer, Ballaigues, Switzerland) and Hedstrom files (file size 35, 30, and 25, Dentsply Maillefer, Ballaigues, Switzerland; n = 33; H-GG). All of the teeth were submitted twice to a micro-computed tomography (micro-CT) scan, before and after non-surgical endodontic retreatment procedures. The volume of root canal filling material (mm3), volume of remaining root canal filling material (mm3), non-surgical endodontic retreatment working time (min), proportion of remaining root canal filling material (%), and efficacy of root canal filling material removal between the non-surgical endodontic retreatment techniques were analyzed using ANOVA one-way statistical analysis. Statistically significant differences were observed between the proportions of remaining root canal filling material of PTR and H-GG (p = 0.018), between the non-surgical endodontic retreatment working times (min; p < 0.001), and between the efficacies of root canal filling material removal by the non-surgical endodontic retreatment techniques (p = 0.009). However, the non-surgical endodontic retreatment systems allow for similar carrier-based root canal filling material removal.
4
Kapse, Balaji Sopanrao, Pradnya S. Nagmode, Jayshree Ramkrishna Vishwas, Hrishikesh B. Karpe, Harshal V. Basatwar, and Shubham P. Godge. "Cone-beam Computed Tomographic Analysis of Canal Transportation and Centering Ability of Three Different Nickel-Titanium Rotary File Systems." Open Access Macedonian Journal of Medical Sciences 9, no. D (March 21, 2021): 30–36. http://dx.doi.org/10.3889/oamjms.2021.5666.
Full textAbstract:
AIM: The aim of the present study was to compare the canal transportation and centering ability of three rotary nickel-titanium file systems, HyFlex controlled memory, Revo-S, and Mtwo in moderately curved root canals using computed tomography (CT).
MATERIALS AND METHODS: Thirty freshly extracted single-rooted teeth having curved root canals with at least 10°–20° of curvature were selected. The teeth were divided into three experimental groups of ten each. After preparation with HyFlex CM (Coltene-Whaledent, Allstetten, Switzerland), Revo-S (Micro-Mega, Besançon, France), and Mtwo (VDW, Munich, Germany) all teeth were scanned using CT to determine the root canal shape. Pre- and post-instrumentation images were obtained at three levels, 3 mm apical, 9 mm middle, and 15 mm coronal above the apical foramen were compared using CT software. Amount of transportation and centering ability were assessed. The three groups were statistically compared with analysis of variance and post-hoc Tukey’s honestly significant difference test.
RESULTS: Least apical transportation and higher centering ability were seen in HyFlex CM file system in all the three sections followed by Revo-S, Mtwo file system showed maximum transportation.
CONCLUSIONS: According to the present in-vitro study, we can conclude that HyFlex CM rotary file systems showed least canal transportation and highest centering ability as compared to Revo-S and Mtwo file system but there was no statistically significant difference among these file systems (p > 0.05) at coronal, middle, and apical level of root canal.
5
Güneç, Hüseyin Gürkan, Neslihan Büşra Keskin, and Faruk Haznedaroğlu. "Comparison of cyclic fatigue resistance of different and novel heat-treated nickel-titanium rotary file systems at the intracanal temperature." International Dental Research 11, no. 3 (December 31, 2021): 158–64. http://dx.doi.org/10.5577/intdentres.2021.vol11.no3.4.
Full textAbstract:
Aim: The aim of this study was to compare the cyclic fatigue resistance of different heat-treated nickel-titanium rotary systems at intracanal temperature.
Methodology: A total of 90 OneCurve (Micro-Mega, Besançon, France), VDW.ROTATE (VDW Dental, Munich, Germany), Typhoon (Clinician’s Choice, New Milford, CT, USA), HyFlex EDM (Coltene/Whaledent AG, Altstatten, Switzerland), and EndoArt Gold and Blue (Inci Dental, Istanbul, Turkey) (n = 15) rotary files (#25/0.06) were tested at intracanal temperature (35.5 ℃) using a dynamic model in a stainless-steel artificial canal with an inner diameter of 1.5 mm, 60° angle of curvature, and 2 mm radius of curvature. Testing was conducted until fracturing, at which time the device stopped automatically, and the number of rotations was calculated as seconds. Lengths of fractured parts were measured using a digital caliper. One-way ANOVA test followed by Tukey’s test was used to compare the groups. Scanning electron microscopic evaluation was performed to confirm the types of fracture.
Results: EndoArt Blue group had a significantly higher mean time to fracture in all groups, followed by the HyFlex EDM, VDW.ROTATE, OneCurve, EndoArt Gold, and Typhoon. In addition, the HyFlex EDM and VDW.ROTATE groups had no significant differences between each other and were significantly better than the others. No significant differences were found between the OneCurve, EndoArt Gold, and Typhoon groups (p>0.05).
Conclusion: This is the first study in the literature for EndoArt NiTi files and the second study for VDW.ROTATE that evaluated cyclic fatigue resistance. Novel EndoArt Blue files exhibited significantly greater cyclic fatigue resistance than the other NiTi files.
How to cite this article: Güneç HG, Keskin NB, Haznedaroğlu F. Comparison of cyclic fatigue resistance of different and novel heat-treated nickel-titanium rotary file systems at intracanal temperature. Int Dent Res 2021;11(3):158-64. https://doi.org/10.5577/intdentres.2021.vol11.no3.4
Linguistic Revision: The English in this manuscript has been checked by at least two professional editors, both native speakers of English.
6
Deveci Taç, Meltem, Sadullah Kaya, and Seda Falakaloğlu. "Evaluation of dentinal micro-cracks caused by the Protaper Universal, Protaper Next and Reciproc rotary file systems used in root canal preparation." International Dental Research 8, no. 3 (December 30, 2018): 111–16. http://dx.doi.org/10.5577/intdentres.2018.vol8.no3.3.
Full textAbstract:
Objective: In this study, we compared the occurrence of dentinal micro-cracks after use of the ProTaper Universal (Dentsply Maillefer, Ballaigues, Switzerland), ProTaper Next (Dentsply Maillefer), and Reciproc (VDW, Munich, Germany) nickel–titanium rotary file systems in root canal preparation.
Method: One hundred mandibular anterior teeth were divided into five groups of 20 specimens each. Group 1 served as a control, with no intervention. In group 2, preparation was performed using the step-back technique and K files. In groups 3–5, root canal preparation was performed using the ProTaper Universal, ProTaper Next, and Reciproc file systems, respectively. Following preparation, specimens were sectioned at 3, 6, and 9 mm using a Minitom precision cut-off machine. The sections were evaluated under a stereomicroscope. The following scoring system was used to rate specimens: 1, no micro-crack; 2, incomplete micro-crack; and 3, vertical root fracture. The results were statistically assessed (p ≤ 0.05).
Results: No micro-crack formation was observed in groups 1 and 2. The highest rate of micro-crack formation was observed in specimens prepared with the ProTaper Universal file system (20%), followed by those prepared with the Reciproc (11.7%) and ProTaper Next (6.7%) file systems. However, no significant difference was detected among groups (p > 0.05). In the groups ProTaper Universal and Reciproc files were used, 1 vertical root fracture was found in 9 mm sections for each.
Conclusion: Considering the limitations of in vitro studies, we can conclude that all rotary file systems used in this study led to dentinal micro-crack formation in roots. The ProTaper Universal file system caused more dentinal micro-cracking than did the ProTaper Next and Reciproc file systems.
7
Cimpean, Sanda Ileana, Adrian Mihai Varvara, Smaranda Dana Buduru, Ioana Sofia Ciutrila, Mihaela Carmen Hedesiu, Anca Ciurea, and Loredana Adela Colceriu Burtea. "CBCT Evaluation of Changes in Root Canal Geometry Induced by the Chemical Structure of NiTi Alloys of Three Rotary Systems." Revista de Chimie 71, no. 6 (July 1, 2020): 170–77. http://dx.doi.org/10.37358/rc.20.6.8181.
Full textAbstract:
Preservation of the root canal anatomy is very important for the success of endodontic treatment.Properly instrumentation of curvet root canals is influenced by flexibility of endodontic instruments which depends on composition and thermomechanical treatment of the metallic alloy. The aim of the current study was to compare the changes in root canal geometry after the preparation with two systems that work in reciprocating motion (Reciproc25, Primary Wave One) and another one in continuous rotation (One Shape), using CT measurements. Forty-five canals of extracted molars with curvatures ranging from 9 to 40 degrees were chosen for this study. The canals were divided, according to the canal curvature into three homogeneous groups and were prepared with three different rotary systems: group I with Reciproc file 25.08 (VDW, Munich, Germany), group II with Wave One Primary 25.08 (Dentsply-Maillefer Ballaigues, Switzerland) and group III with One Shape 25.06 (Micro Mega, Bensancon, France).All groups were scanned pre and post instrumentation, using NewTo 3G CBCT (QR, Italy, FOV, 0.16mm voxel size). The following parameters were assessed after measurements on cross-sectional CBCT images: the centering ability, diameter change, canal transportation. All instruments maintain the original canal curvature well, resulting in no significant differences of their centering ability (P]0.05) and canal transportation (P]0.05). The highest increase in diameter of canal was observed with Primary Wave One, which was not statistically significant for the entire canal (P]0.05). Instrumentation with Reciproc was faster than instrumentation with One Shape and Wave One,but the differences were not statistically significant (P]0.05). All systems perform safe and proper canal preparations and can be used in root canal treatment of curved canals.
8
Dundar, Mehmet, Özkan Adıgüzel, and Sadullah Kaya. "The comparison of cyclic fatigue resistance of two different reciprocal files according to different access angles into the root canal." International Dental Research 11, Suppl. 1 (September 30, 2021): 114–21. http://dx.doi.org/10.5577/intdentres.2021.vol11.suppl1.18.
Full textAbstract:
Aim: Root canal preparation is one of the most important steps of root canal treatment. Preparation procedure includes disinfection and shaping protocols. Ni-Ti rotary file systems are usually used for shaping. The biggest disadvantage of the usage of Ni-Ti rotary file systems is that the file gets broken during the treatment. There are many reasons for the breakage of files. One of the reasons may be the increase in the access angle. The purpose of this study is to compare the cyclic fatigue of reciprocating Reciproc and WaveOne Gold rotary systems according to different angles of accessing the root canal of Ni-Ti files.
Methodology: In our study, 90 root canal files were used, 45 of which is Reciproc R25 (VDW GmbH, Munich, Germany) and the other 45 of which is WaveOne Gold Primary 25/07 (Dentsply, Maillefer, Ballaigues, Switzerland). Specially designed and manufactured stainless steel artificial roots whose curvature angle is 60° and curvature radius is 5 mm, which replicates the clinical conditions, were arranged. By enabling the files access the roots at 0°- 15°- 30° degrees, the lap numbers that they do till they break due to cyclic fatigue were examined.
Results: When looking at the lap numbers that the Reciproc and WaveOne Gold root canal files do till they break, at accessing the roots at the same angles WaveOne Gold root canal file makes more lap numbers at all angles when compared with the Reciproc root canal file. Significant results were found when the groups were compared within one another and between groups and among all numeric data in the statistical analysis performed. It was also found that WaveOne Gold root canal file had more cyclic fatigue resistance. When the groups were compared within one another, it was found that the increase in the root access angle decreases the cyclic fatigue resistance of the files (p<0.05). No significant difference was found in the statistical analysis for comparison of the length of the broken file pieces (p=0.01). It was analyzed that when the broken files were examined via scanning electron microscope, file breakages occurred due to cyclic fatigue.
Conclusion: Not only do the design features and production technology affect the breakage resistance due to cyclic fatigue of the root canal, the access angle to the roots affects the cyclic fatigue of the root canal files, as well.
How to cite this article: Adıgüzel Ö, Dundar M, Kaya S. The comparison of cyclic fatigue resistance of two different reciprocal files according to different entry angles into the root canal. Int Dent Res 2021;11(Suppl.1):114-21. https://doi.org/10.5577/intdentres.2021.vol11.suppl1.18
Linguistic Revision: The English in this manuscript has been checked by at least two professional editors, both native speakers of English.
9
Keskin, Neslihan Büşra, and Gürkan Güneç. "Comparison of Cyclic Fatigue Resistance of Heat-Treated Nickel-Titanium Reciprocating Instruments at the Intracanal Temperature." Balkan Journal of Dental Medicine 25, no. 2 (July 1, 2021): 87–91. http://dx.doi.org/10.2478/bjdm-2021-0014.
Full textAbstract:
Summary Background/Aim: The aim of the present study was to compare the cyclic fatigue resistance of NiTi files running with reciprocal motion and having different characteristics (RPC Blue, WOG, EndoArt Wise Reciproc Gold, EndoArt Wise Reciproc Blue) at the intracanal temperature (35°C) by using NaOCl irrigation solution. Material and Methods: Totally 60 WaveOne GOLD (Dentsply-Sirona, Ballaigues, Switzerland), Reciproc Blue (VDW, Munich, Germany), EndoArt Wise Reciproc Gold, and EndoArt Wise Blue (Inci Dental Productions Co, Istanbul, Turkey) (n= 15) files were used. Each of the rotary files were tested at the intracanal temperature (35°C) using a dynamic model in a stainless-steel artificial canal with an inner diameter of 1.5 mm, 60° angle of curvature, and 2mm radius of curvature until fracture occurred. The device automatically stopped at the moment of fracture and the number of cycles to the fracture was calculated as per second. The lengths of fractured parts were measured using a digital microcaliper. The One-Way Analysis of Variance (ANOVA) and Tukey’s post-hoc tests were used for intergroup comparisons. Results: In 2 mm Radius of curvature, the EndoArt Wise Reciproc Blue group had a significantly higher time to fracture followed by the EndoArt Wise Reciproc Gold, Resiproc Blue, WaveOne Gold. No significant difference was found between EndoArt Wise Reciproc Gold and Resiproc Blue groups (P>0.05). Among the groups, there was no statistically significant difference in the lengths of fractured parts of the instruments (P> 0.05). Conclusions: EndoArt Wise Reciproc Blue files exhibited significantly higher cyclic fatigue resistance compared with other files tested in a 2-mm radius of curvature and a 60° angle in an artificial canal at the intracanal temperature.
10
Boscornea-Pușcu, Andreea-Simona, Laura Orel, Oana-Alexandra Velea-Barta, Razvan Mihai Horhat, Meda-Lavinia Negruțiu, Luminița Maria Nica, Virgil-Florin Duma, Dan Ioan Stoia, Carmen Opriș, and Cosmin Sinescu. "Experimental Study of the Effects of Torsional Loading on Three Types of Nickel-Titanium Endodontic Instruments." Applied Sciences 11, no. 16 (August 5, 2021): 7224. http://dx.doi.org/10.3390/app11167224.
Full textAbstract:
In modern endodontics, nickel-titanium (NiTi) rotary instruments are used on a large scale for root canal shaping. Nevertheless, the separation of an instrument is a serious concern during shaping. The aim of this study is to determine and compare the torsional fracture characteristics of three types of NiTi endodontic instruments, each with different cross-section designs and movements performed during root canal shaping: Endostar E3 (Endostar, Poldent Co. Ltd., Warsaw, Poland); Reciproc R25 (VDW, Munich, Germany); and Protaper Next X2 (Dentsply Maillefer, Ballaigues, Switzerland). Fifteen instruments are used in this study, divided in three groups (n = 5): Group Endostar, Group Reciproc and Group Protaper. For testing, each instrument is used to shape five simulated root canals, following which its torsional stress to failure is measured. The fracture lengths of all three groups are roughly between 2 and 3 mm from the tip. Higher values of the moment of torsion in fracture, and smaller values of the maximum twisting angle are observed for Group Endostar, as well as closer to circular cross-sections. However, the values of the shear tension are similar for all three groups, because the disadvantage given by the fracture section shape for Groups Reciproc and Protaper is compensated either by size or by intrinsic properties of the instrument material. For the shear tension the Endostar values are insignificantly increased (Kruskal–Wallis test, p = 0.207), and in the case of the maximum twist angle the Protaper values are insignificantly increased (Kruskal–Wallis test, p = 0.287). Because of the instruments shape and conicity, the analysis had to be carried out separately with regard to the length of the fractured tip. Rules-of-thumb are extracted from the study for current practice: if a blockage of the first 2 to 3 mm part of the tip can be anticipated (by the excessive curving of the instrument), the handpiece must be adjusted to torque values that do not exceed 1.5 to 2.5 N · cm for Endostar and 1 to 2 N · cm for Reciproc and Protaper instruments.
Books on the topic "Rotary Club (Munich, Germany)"
1
B, Spannaus Nancy, Kronberg Molly Hammett, Everett Linda, and International Club of Life Conference (1988 : Munich, West Germany), eds. How to stop the resurgence of Nazi euthanasia today: Including transcripts of the International Club of Life Conference, Munich, West Germany, June 11-12, 1988. Washington, D.C: EIR News Service Inc., 1988.
Find full text