Relevant bibliographies by topics / Rotary table

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Rotary table'

Author: Grafiati
Published: 4 June 2021
Last updated: 25 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Rotary table.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Rotary table"

1

Dassanayake, K. M. Muditha, and Masaomi Tsutsumi. "High Performance Rotary Table for Machine Tool Applications." International Journal of Automation Technology 3, no. 3 (2009): 343–47. http://dx.doi.org/10.20965/ijat.2009.p0343.

Full text
Abstract:
The high performance rotary tables are immense necessary part for the multi-axis machines. These rotary tables are yet in the developing stage. In this report, a rotary table driven by roller drive is introduced and the characteristics of that are discussed by comparing them with the characteristics of rotary table driven by worm gear mechanism. As the characteristics, the positioning accuracy and repeatability, frequency response, rotational fluctuations and influence of unbalance mass on motion are measured. According to the measured results, it can be said that the rotary table driven by ro
APA, Harvard, Vancouver, ISO, and other styles
2

Chen, Hongfang, Bo Jiang, Hu Lin, et al. "Calibration Method for Angular Positioning Deviation of a High-Precision Rotary Table Based on the Laser Tracer Multi-Station Measurement System." Applied Sciences 9, no. 16 (2019): 3417. http://dx.doi.org/10.3390/app9163417.

Full text
Abstract:
This paper proposes a calibration method for angular positioning deviation of a high-precision rotary table based on the laser tracer multi-station measurement system. The algorithm error of the calibration method for angular positioning deviation of a high-precision rotary table based on the laser tracer multi-station measurement system was mainly discussed. During the experiments, the laser tracer was fixed on the work surface of the rotary table, and the rotary was fixed on the work surface of the coordinate measurement machine (CMM). The rotary table was rotated with the same angular inter
APA, Harvard, Vancouver, ISO, and other styles
3

Tanase, I., and G. Stan. "Thermal influence on the positioning accuracy of the CNC machine tool rotary tables." IOP Conference Series: Materials Science and Engineering 1182, no. 1 (2021): 012079. http://dx.doi.org/10.1088/1757-899x/1182/1/012079.

Full text
Abstract:
Abstract This work analyses the perturbing thermal sources and design solutions to avoiding the thermal effects. The analysis is focused, as main factors of the thermal dilatation, on the rotary tables, the guiding systems, the radial one and, especially, the axial one (that takes over the weight of both table and work piece), as well as on the positioning of the driving servomotor that is a thermal source in the vicinity of the rotary table. The new solutions presented in this work refer to the rotary tables with direct measuring whose number of indexing positions is 360000 that means a minim
APA, Harvard, Vancouver, ISO, and other styles
4

Sato, Ryuta. "Mathematical Model of a CNC Rotary Table Driven by a Worm Gear." International Journal of Intelligent Mechatronics and Robotics 2, no. 4 (2012): 27–40. http://dx.doi.org/10.4018/ijimr.2012100103.

Full text
Abstract:
This paper proposes a mathematical model of a CNC rotary table driven by a worm gear. The CNC rotary tables are generally utilized as rotary axes of 5-axis machining centres. In this study, a mathematical model which can simulate dynamic behaviours of rotary table is proposed. The model consists of inertia of motor, spur and worm gears, and table. Axial displacement of the worm is also considered into the model. Various motions are measured and simulated to confirm effectiveness of the model. As the results show, the proposed model can simulate step response, rotational fluctuations, and influ
APA, Harvard, Vancouver, ISO, and other styles
5

Ding, Long, Xingang Zhang, Qiuyu Liu, Ying Yan, and Ping Zhou. "Vibration characteristics of the rotary table of large spin coater and its influencing factors." Journal of Physics: Conference Series 2557, no. 1 (2023): 012007. http://dx.doi.org/10.1088/1742-6596/2557/1/012007.

Full text
Abstract:
Abstract The rotary table vibration of the spin coater directly impacts the quality of the spin coating film. In view of the unclear vibration characteristics of the rotary table during operation, the rotary table vibration characteristics and its influencing factors considering the spindle system are studied. Based on the elastic contact theory and multi-body system theory, the rotary table vibration characteristics of the rotary table when the parts of the rotary table are flexible are analyzed by establishing the rotary table multi-rigid body and flexible coupling dynamics models, respectiv
APA, Harvard, Vancouver, ISO, and other styles
6

Xie, Miao, He Wang, Zhixiang Liu, Suning Ma, Xia Wu, and Yufeng Dong. "Vibration source analysis and structural optimization design of rotary table based on OTPA." PLOS ONE 19, no. 7 (2024): e0305351. http://dx.doi.org/10.1371/journal.pone.0305351.

Full text
Abstract:
Due to the influence of coal rock shape, hardness, working environment and other factors in the cutting process of cantilever roadheader, the cutting head will produce irregular and violent vibration. As the rotary table of key stress components, its operation process stability, dynamic reliability and life affect the cutting efficiency and cutting stability of cantilever roadheader. In order to study the vibration characteristics of the rotary table in the cutting process, firstly, based on the theory of spatial force analysis and calculation, the spatial mechanical model of the rotary table
APA, Harvard, Vancouver, ISO, and other styles
7

Sato, Ryuta, and Masaomi Tsutsumi. "High Performance Motion Control of Rotary Table for 5-Axis Machining Centers." International Journal of Automation Technology 1, no. 2 (2007): 113–19. http://dx.doi.org/10.20965/ijat.2007.p0113.

Full text
Abstract:
We discuss motion control techniques of rotary tables for 5-axis machining centers. Three translational axes and two rotary ones are controlled simultaneously in the machining of complex shapes such as impellers. A tilting rotary table powered by a worm gear is generally used as the rotary axes for 5-axis machining centers, and various causes of inaccuracy exist in the rotary axes. In this study, we clarified three causes of inaccuracy exists in the rotary axis: rotational fluctuation in the worm gear, backlash, and measurement delay of rotary encoder for feedback. Motor torque saturation of t
APA, Harvard, Vancouver, ISO, and other styles
8

Akash, Vince H., Geradus Kiko O. Antony, Kasprov Consal Le Laetus, and Reddy G. Lokesh. "Advancements in Rotary Table - Oil Rigs." Journal of Advanced Research in Industrial Engineering 2, no. 3 (2020): 1–5. https://doi.org/10.5281/zenodo.4083994.

Full text
Abstract:
<em>Oil and natural gas play a vital role in the day to day running of the world, starting from the likes of electricity to transportation. Thus extraction of these oil and natural gases are of importance for the smooth running of the day to day activities. This is facilitated by means of Oil and Natural Rigs, which not alone identifies the various geological resources, but also facilitates the extraction of oil from these resources. These Oil and Natural Rigs have a rotary table which supports a drill assembly, where the drill stems are loosened and tightened. The conventional Mechanical Rota
APA, Harvard, Vancouver, ISO, and other styles
9

Zha, Jun, Yaolong Chen, and Penghai Zhang. "Precision design of hydrostatic thrust bearing in rotary table and spindle." Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 232, no. 11 (2016): 2044–53. http://dx.doi.org/10.1177/0954405416682279.

Full text
Abstract:
According to the increasing needs of rotary table and spindle to satisfy high-precision machining requirements, the accuracy of rotary table and spindle becomes an important issue due to the error averaging effect of hydrostatic thrust bearing. The objective of this study is to research a methodology to guide the precision design of hydrostatic thrust bearing in rotary table and spindle. A run-out error model based on error averaging effect is established using the Reynolds equation, pressure boundary conditions, flux continuity equations of pad and dynamic equations of shaft. The axial run-ou
APA, Harvard, Vancouver, ISO, and other styles
10

Wadi, Andi. "PENGEMBANGAN ALAT ROTARY TABLE PADA KOMPETENSI CETAK SARING PROGRAM KEAHLIAN DESAIN DAN PRODUKSI KRIYA TEKSTIL SMK NEGERI 1 SUKASADA." Jurnal Guru Dikmen dan Diksus 2, no. 2 (2020): 119–31. http://dx.doi.org/10.47239/jgdd.v1i2.32.

Full text
Abstract:
Penelitian ini bertujuan untuk mengembangkan alat bantu pada kompetensi cetak saring, dengan menggunakan metode Research and Development (R&amp;D). Analisis data dan uji coba produk melalui eksperimen model before-after. Uji signifikansi dengan statistik komparasi paired sampel t-test dilakukan untuk mengetahui keefektifan penggunaan alat lama dan alat hasil pengembangan. Hasil uji keefektifan menunjukkan perbandingan alat lama dengan alat rotary table pada aspek kecepatan 90% : 79%, aspek ketepatan 91% : 84% dan aspek kerapian 90%: 83%, rata-rata 91% : 82% dengan nilai korelasi sebesar -0,40.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Rotary table"

1

Dyck, Mark. "Magnetically levitated six degree of freedom micro-machining rotary table." Thesis, University of British Columbia, 2014. http://hdl.handle.net/2429/51753.

Full text
Abstract:
This thesis presents a six degree of freedom magnetically levitated rotary table that has one unlimited rotation axis. The actuation force is achieved by the Lorentz force. The underside of the actuator has an axial Halbach array mounted circumferentially near the outside edge. Force is produced in the stator coils which are made using a printed circuit board. The purpose of this table is for a micro-machining rotary table application. Benefits of this table are its compact, lightweight, no friction and high precision characteristics. Control of the table in six degrees of freedom is achieved b
APA, Harvard, Vancouver, ISO, and other styles
2

Schack, Tobias, and Ludvig Böös. "3D-Bodycanning: A market research based approach for rotary table selection." Thesis, Högskolan i Halmstad, Akademin för ekonomi, teknik och naturvetenskap, 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:hh:diva-34158.

Full text
Abstract:
This report provides a recommendation for the purchase of a rotary table intendedmainly for 3D body scanning. This recommendation is presented to FabLab,Halmstad University. The proposal is based on the needs and requirements discussed and defined among group members, clients and other stakeholders. The main requirement is that the product can be programmed and controlled by acomputer. This requirement was strengthened through the execution of a pairwise comparison. A broad market research is described and methods that have been used to achieve the results. In order to better understand how mu
APA, Harvard, Vancouver, ISO, and other styles
3

Nešpor, Vít. "Dvousouřadnicový NC stůl pro frézovací centra s hydraulickým upínačem." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2013. http://www.nusl.cz/ntk/nusl-230754.

Full text
Abstract:
This thesis deals with theoretical design of NC rotary tilting table for Kovosvit MAS milling machine MCV 754 - QUICK. In the beginning of this paper is made a research with focus to rotary tilting tables, paletizing technologies and rotary suppliers of energy. The main part concerns with loading analysis of rotary tilting table, proposal of motion drives, bearings and the frame of desired machine. For motion drive of each axis is chosen torque motor. Constructional solution of pressed air supply to the middle boring of face plate is realized by a rotary union. The next point of solution is ar
APA, Harvard, Vancouver, ISO, and other styles
4

Bezděk, Petr. "Konstrukční návrh otočného stolu s nosností 65 000 kilogramů." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2021. http://www.nusl.cz/ntk/nusl-443716.

Full text
Abstract:
The diploma thesis deals with the design of a rotary table for machining large non-rotary workpieces up to a maximum weight of 65 000 kg. The aim of the work is to analyze and evaluate the current state of knowledge in the field of rotary tables, to create a table design according to the assignment and its 3D model with part of the drawing documentation. The theoretical part of the work searches for solutions used in the construction of rotary tables in the category of table according to the assignment. The information obtained is further used in the design of rotary table solution variants. B
APA, Harvard, Vancouver, ISO, and other styles
5

Multáňová, Katarína. "Design vstřikovacího lisu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2010. http://www.nusl.cz/ntk/nusl-229377.

Full text
Abstract:
Diploma thesis deals with the development of injection moulding machine design. It is a type of industrial machine, which is designed for production of plastic parts by technology of compression molding. Injection and closing units in the machine are vertical orientated to each other. Injection moulding machine is equipped with rotary table. The main task of diploma work is to design an injection moulding machine with original shape for the future. Conception of the machine is based on present progresive technical solutions. Design of the machine tolerates main ergonomic demands and make the w
APA, Harvard, Vancouver, ISO, and other styles
6

Kűhnel, Martin. "Návrh robotického pracoviště pro lepení magnetů na DC motory." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2011. http://www.nusl.cz/ntk/nusl-229498.

Full text
Abstract:
The diploma thesis deals with the design of a general concept workplace for gluing magnets to the DC stators. The thesis is focused on the selection of industrial robots and their location, the design and the construction of end effectors for manipulation with segments and stators and the proposal of solution for engineering units on a workplace. Among the construction units belong: revolving tables with gripping systems, rotary tables on pallets and construction manipulators. At the end of the thesis the concept of the solution for workplace safety is created according to current legislation
APA, Harvard, Vancouver, ISO, and other styles
7

Balák, Pavel. "Konstrukce otočného lineárně přesuvného stolu s pevnou boční upínací deskou pro stroj FGU RT." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2013. http://www.nusl.cz/ntk/nusl-230818.

Full text
Abstract:
The aim of this diploma thesis is design of rotary-linear table with side clamping plate. Rotary-linear table is applicated to the profiled guideways used linear table. The work is focused on the design of the individuals nodes and their calculations.
APA, Harvard, Vancouver, ISO, and other styles
8

Kunorza, Michal. "Multifunkční obráběcí centrum pro rotační i nerotační obrobky." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2014. http://www.nusl.cz/ntk/nusl-231335.

Full text
Abstract:
Objective of the diploma thesis is design of multifunctional machining centre, where is machining rotating and prismatic parts enabled. Because it is large theme, thesis is solved by group. My task was to design parts of mottion axes. Diploma thesis contains complex design of machine tool from discovering optimal kinematics for required applictaion, analysis of influences acting to machine, modular concept and design solution.
APA, Harvard, Vancouver, ISO, and other styles
9

Axmann, Patrik. "NC otočný stůl s lineární osou." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2020. http://www.nusl.cz/ntk/nusl-417425.

Full text
Abstract:
This diploma thesis deals with the construction of an NC rotary table with a linear axis. The first part is devoted to the analysis of the current state of science and technology in the problem, the use of various drives, mechanisms for torque transmission, linear feed lines, measuring and an overview of tables from various manufacturers. Furthermore, the work is devoted to the creation of 4 variants of construction, then the selection of the best variant and technical calculations. At the end, the work deals with a detailed description of the machine.
APA, Harvard, Vancouver, ISO, and other styles
10

Mahmoodabadi, Majid. "KOREAN ANTHRACITE COAL CLEANING BY MEANS OF DRY AND WET BASED SEPARATION TECHNOLOGIES." UKnowledge, 2015. http://uknowledge.uky.edu/mng_etds/18.

Full text
Abstract:
Korean coals are typically high rank anthracite characterized by high ash content and difficult cleaning characteristics. The main objective of the study was to evaluate the feasibility of treating various size fractions within the coal using an assortment of physical coal cleaning technologies. Dry cleaning is preferred due to the friability of the coal. As such, three pneumatic processes were tested including Ore Sorting for the plus 10 mm material, Air Table Separation for 10 x 1 mm fraction and Tribo-electric Separator for - 1 mm fraction. The Dense Medium Cyclone is known to be one of the
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Rotary table"

1

Aneloski, Liz, and Kandy Petersen. Quick & easy block tool: 102 rotary-cut quilt blocks in 5 sizes, simple cutting charts, helpful reference tables. C&T Pub., 2003.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Table of Attenuation Error As a Function of Vane-Angle Error for Rotary Vane Attenuators; NBS Technical Note 177. Creative Media Partners, LLC, 2021.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

The 2006-2011 World Outlook for Rotary Tables. Icon Group International, Inc., 2005.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Parker, Philip M. The 2007-2012 World Outlook for Rotary Tables for Machine Tools and Metalworking Machinery. ICON Group International, Inc., 2006.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Parker, Philip M. The 2007-2012 World Outlook for Indexing Work Holders for Machine Tools and Metalworking Machinery Excluding Rotary Tables. ICON Group International, Inc., 2006.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Parker, Philip M. The 2007-2012 World Outlook for Rotary Tables and Drilling Surface Equipment for Blocks, Crown, Traveling, Draw Works, and Accessories. ICON Group International, Inc., 2006.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

The 2006-2011 World Outlook for Rotary Tables and Drilling Surface Equipment for Blocks, Crown, Traveling, Draw Works, and Accessories. Icon Group International, Inc., 2005.

Find full text
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Rotary table"

1

Richter, A., and J. Ondrášek. "Rotary Table Machine Input Parameters Optimization." In Advances in Mechanism Design II. Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-44087-3_54.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Krol, O. "High-Efficiency Worm Drive for Machine Rotary Table." In Proceedings of the 8th International Conference on Industrial Engineering. Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-031-14125-6_5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Richter, Aleš, and Pavel Fišer. "Reliability Analysis of Rotary Table Over the Lifetime." In Advances in Mechanism Design III. Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-83594-1_28.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Krol, Oleg, Vladimir Sokolov, and Oleksandr Logunov. "Development of Machining Center Rotary Table with a Modified Worm Drive." In Lecture Notes in Mechanical Engineering. Springer Nature Switzerland, 2024. http://dx.doi.org/10.1007/978-3-031-62684-5_33.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Liu, Yunhui, Yuyong Han, Qi Xu, Sensen Zhou, and Wei Zhang. "Design of Detection Device for Multi-Specification Precision CNC Rotary Table Performance." In Springer Proceedings in Materials. Springer Nature Singapore, 2025. https://doi.org/10.1007/978-981-96-5354-6_33.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Gilbert, R. W., and N. J. Quick. "Automatic Rotary Table Assembly Machines — Prediction Techniques for Output Rates and Efficiency Levels." In Advances in Manufacturing Technology. Springer US, 1986. http://dx.doi.org/10.1007/978-1-4757-1355-8_17.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Gilbert, R. W., and N. T. A. Wood. "Automatic Rotary Table Assembly Machines — Delay and Make Right or Combine and Reject." In Advances in Manufacturing Technology. Springer US, 1986. http://dx.doi.org/10.1007/978-1-4757-1355-8_18.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Cheng, Qiang, Can Wu, Zhifeng Liu, Jianhua Wang, and Peihua Gu. "The Parametric Design and Automatic Assembly of Hydrostatic Rotary Table Based on Pro/Engineer." In Lecture Notes in Electrical Engineering. Springer Berlin Heidelberg, 2014. http://dx.doi.org/10.1007/978-3-642-41674-3_119.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Krol, Oleg, and Volodymyr Sokolov. "Optimal Choice of Worm Gearing Design with Increased Wear Resistance for Machine’s Rotary Table." In Lecture Notes in Mechanical Engineering. Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-91327-4_1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Maniar, Nirav P., Niraj J. Sanghani, Hardik A. Khunt, Sudhir Thaker, and Pradeep Thanki. "Design, Analytical Analysis and Manufacturing of 5-Cylinder Hydraulic Fixture with Rotary Table for Machining Case on VMC EZ5." In Recent Advances in Mechanical Infrastructure. Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-32-9971-9_11.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Rotary table"

1

Fu, Zhenzhou, Xiao Pan, Zheng Gong, and Yazhe Sun. "Ground Calibration of Long-focal-length Linear Array Camera Based on Collimator and Two-Axis Rotary Table." In 2023 International Conference on Computer, Internet of Things and Smart City (CIoTSC). IEEE, 2023. http://dx.doi.org/10.1109/ciotsc60428.2023.00025.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Gibb, Keely, Navin Francis, Andrew Law, et al. "Methods for Laboratory Replication of Rotary-wing Air Ambulance Vibration Conditions for Neonatal Patient Transport Applications." In Vertical Flight Society 81st Annual Forum and Technology Display. The Vertical Flight Society, 2025. https://doi.org/10.4050/f-0081-2025-71.

Full text
Abstract:
Neonatal patients in need of specialized care may require transport by rotary-wing air ambulances. These patients are subjected to environmental stressors during transport, including elevated levels of mechanical vibration. Aircraft vibration is transmitted through the transport system and incubator to the patient. The unique vibration profile is dependent on vehicle model and phase of flight. To improve safety for these patients, we aim to evaluate the vibration exposure across this complex system. The purpose of this paper is to present and evaluate the methods used for aircraft data collect
APA, Harvard, Vancouver, ISO, and other styles
3

Keller, James, Christopher Colosi, and Gregory Nichols. "Achieving High Performance Aircraft Modeling in Operational Analysis Software using a Minimum Complexity Model." In Vertical Flight Society 74th Annual Forum & Technology Display. The Vertical Flight Society, 2018. http://dx.doi.org/10.4050/f-0074-2018-12829.

Full text
Abstract:
Operational analysis programs are a common tool used by operators to simulate the mission outcomes as a means to estimate mission requirements for both rotary wing and fixed wing aircraft. Operational analysis programs are more commonly referred to as "war games". Mission simulations take into account battlefield topography, atmospheric conditions, aircraft capabilities, and potential threats. The outcomes of these simulations aid operators in decisions such as the number of aircraft to be deployed on a particular mission, what type of aircraft to utilize, as well as the overall risk of the mi
APA, Harvard, Vancouver, ISO, and other styles
4

Richter, Aleš, and Pavel Fišer. "Rotary table accuracy improvement." In 2ND INTERNATIONAL CONFERENCE ON CHEMISTRY, CHEMICAL PROCESS AND ENGINEERING (IC3PE). Author(s), 2018. http://dx.doi.org/10.1063/1.5066527.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Dassanayake, Muditha K. M., and Masaomi Tsutsumi. "Comparison of Motion Characteristics of High Performance CNC Rotary Tables." In ASME 2010 International Mechanical Engineering Congress and Exposition. ASMEDC, 2010. http://dx.doi.org/10.1115/imece2010-37576.

Full text
Abstract:
In this paper, the motion performances of the two rotary tables which are driven by roller gear cam and direct drive motor are measured and compared. The table with roller gear cam was controlled in semi-closed loop and full-closed loop methods while the other was controlled only in full-closed loop method. In the measurements, the positioning accuracy and repeatability, rotational fluctuation, frequency response, step response and etc of the systems were measured. All these tests were carried out without any kind of compensation methods such as pitch error or cogging torque compensation etc.
APA, Harvard, Vancouver, ISO, and other styles
6

Wang, Heyan, Zi Xue, Ni Shen, and Yao Huang. "Calibration of a high precision rotary table." In International Symposium on Precision Engineering Measurement and Instrumentation, edited by Junning Cui, Jiubin Tan, and Xianfang Wen. SPIE, 2015. http://dx.doi.org/10.1117/12.2181236.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Dassanayake, K. M. Muditha, Masaomi Tsutsumi, Ryuta Sato, and Hisayoshi Ito. "Motion Characteristics of High Performance Rotary Tables for CNC Machines." In ASME 2008 International Mechanical Engineering Congress and Exposition. ASMEDC, 2008. http://dx.doi.org/10.1115/imece2008-66108.

Full text
Abstract:
In this paper, the characteristics of two rotary tables driven by worm gear and roller gear cam are measured and compared. The positioning accuracy and repeatability as specified in ISO 230-2 are measured together with the rotational fluctuation, backlash, friction torque, frequency response of the systems and also the influence of unbalance mass on rotational motion. Two rotary encoders which were attached to motor and output axis were used for measurements. The motor, controller, and the rotary encoders were kept the same for both tables to ignore the effects of these units on results. Furth
APA, Harvard, Vancouver, ISO, and other styles
8

Schallschmidt, Thomas, Denis Draganov, and Frank Palis. "Adaptive fuzzy control of magnetically suspended rotary table." In 2008 13th International Power Electronics and Motion Control Conference (EPE/PEMC 2008). IEEE, 2008. http://dx.doi.org/10.1109/epepemc.2008.4635497.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Myszkowski, Adam, Tomasz Bartkowiak, and Andrzej Gessner. "Kinematics of a Novel Type Positioning Table for Cast Alignment on Machine Tool." In ASME 2015 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2015. http://dx.doi.org/10.1115/detc2015-46067.

Full text
Abstract:
The paper presents a study into the kinematics of a novel type of a rotary positioning table based on the constrained parallel mechanism. Fixture and leveling a workpiece on a machine tool table is an essential stage in machining or layout process. In this study, a compact low-height rotary table is presented for automated leveling, which can be mounted directly on the machine tool table without a significant decrease of the workspace. The authors propose a modification of parallel mechanism by introducing four extensible leg design with specific geometrical constraint for workpiece positionin
APA, Harvard, Vancouver, ISO, and other styles
10

Chen, Chun-Jen, Wenyuh Jywe, Yun-Feng Teng, and Chien-Huang Liu. "A Novel Simple and Low Cost 4-DOF Angular Indexing Calibrating Technique for High Precision Rotary Table." In ASME 8th Biennial Conference on Engineering Systems Design and Analysis. ASMEDC, 2006. http://dx.doi.org/10.1115/esda2006-95116.

Full text
Abstract:
For calibrating an angular rotary table, either a high precision standard table or a laser interferometer and related optics are normally employed at high cost. This paper establishes a novel, simple and low cost technique to calibrate a 4-degrees-of-freedom errors of a rotary table (three angular motion errors and one displacement error) for a 360° full circle by employing one reference rotary table, one 1D grating and two 2D (2 dimensional) position-sensing-detectors. With this technique, no highly accurate reference table with good repeatability is needed. After two full circle tests, the 4
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Rotary table"

1

Gandy, David, and Marc Albert. Rotary Table Design for the Modular In-Chamber Electron Beam Welding System. Office of Scientific and Technical Information (OSTI), 2022. http://dx.doi.org/10.2172/1871803.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Accatino, Mark R. Design, development and evaluation of a precision air bearing rotary table with large diameter through-hole. Office of Scientific and Technical Information (OSTI), 1991. http://dx.doi.org/10.2172/10178466.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Allen, Luke, Joon Lim, Robert Haehnel, and Ian Detwiller. Rotor blade design framework for airfoil shape optimization with performance considerations. Engineer Research and Development Center (U.S.), 2021. http://dx.doi.org/10.21079/11681/41037.

Full text
Abstract:
A framework for optimizing rotor blade airfoil shape is presented. The framework uses two digital workflows created within the Galaxy Simulation Builder (GSB) software package. The first is a workflow enabling the automated creation of a surrogate model for predicting airfoil performance coefficients. An accurate surrogate model for the rapid generation of airfoil coefficient tables has been developed using linear interpolation techniques that is based on C81Gen and ARC2D CFD codes. The second workflow defines the rotor blade optimization problem using GSB and the Dakota numerical optimization
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Rotary table' for particular source types:
Journal articles Dissertations / Theses
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography