Log in

Relevant bibliographies by topics / Rotary table / Dissertations / Theses

To see the other types of publications on this topic, follow the link: Rotary table.

Dissertations / Theses on the topic 'Rotary table'

Author: Grafiati

Published: 4 June 2021

Last updated: 25 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 43 dissertations / theses for your research on the topic 'Rotary table.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse dissertations / theses on a wide variety of disciplines and organise your bibliography correctly.

1

Dyck, Mark. "Magnetically levitated six degree of freedom micro-machining rotary table." Thesis, University of British Columbia, 2014. http://hdl.handle.net/2429/51753.

Full text

Abstract:

This thesis presents a six degree of freedom magnetically levitated rotary table that has one unlimited rotation axis. The actuation force is achieved by the Lorentz force. The underside of the actuator has an axial Halbach array mounted circumferentially near the outside edge. Force is produced in the stator coils which are made using a printed circuit board. The purpose of this table is for a micro-machining rotary table application. Beneﬁts of this table are its compact, lightweight, no friction and high precision characteristics. Control of the table in six degrees of freedom is achieved b

APA, Harvard, Vancouver, ISO, and other styles

2

Schack, Tobias, and Ludvig Böös. "3D-Bodycanning: A market research based approach for rotary table selection." Thesis, Högskolan i Halmstad, Akademin för ekonomi, teknik och naturvetenskap, 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:hh:diva-34158.

Full text

Abstract:

This report provides a recommendation for the purchase of a rotary table intendedmainly for 3D body scanning. This recommendation is presented to FabLab,Halmstad University. The proposal is based on the needs and requirements discussed and defined among group members, clients and other stakeholders. The main requirement is that the product can be programmed and controlled by acomputer. This requirement was strengthened through the execution of a pairwise comparison. A broad market research is described and methods that have been used to achieve the results. In order to better understand how mu

APA, Harvard, Vancouver, ISO, and other styles

3

Nešpor, Vít. "Dvousouřadnicový NC stůl pro frézovací centra s hydraulickým upínačem." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2013. http://www.nusl.cz/ntk/nusl-230754.

Full text

Abstract:

This thesis deals with theoretical design of NC rotary tilting table for Kovosvit MAS milling machine MCV 754 - QUICK. In the beginning of this paper is made a research with focus to rotary tilting tables, paletizing technologies and rotary suppliers of energy. The main part concerns with loading analysis of rotary tilting table, proposal of motion drives, bearings and the frame of desired machine. For motion drive of each axis is chosen torque motor. Constructional solution of pressed air supply to the middle boring of face plate is realized by a rotary union. The next point of solution is ar

APA, Harvard, Vancouver, ISO, and other styles

4

Bezděk, Petr. "Konstrukční návrh otočného stolu s nosností 65 000 kilogramů." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2021. http://www.nusl.cz/ntk/nusl-443716.

Full text

Abstract:

The diploma thesis deals with the design of a rotary table for machining large non-rotary workpieces up to a maximum weight of 65 000 kg. The aim of the work is to analyze and evaluate the current state of knowledge in the field of rotary tables, to create a table design according to the assignment and its 3D model with part of the drawing documentation. The theoretical part of the work searches for solutions used in the construction of rotary tables in the category of table according to the assignment. The information obtained is further used in the design of rotary table solution variants. B

APA, Harvard, Vancouver, ISO, and other styles

5

Multáňová, Katarína. "Design vstřikovacího lisu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2010. http://www.nusl.cz/ntk/nusl-229377.

Full text

Abstract:

Diploma thesis deals with the development of injection moulding machine design. It is a type of industrial machine, which is designed for production of plastic parts by technology of compression molding. Injection and closing units in the machine are vertical orientated to each other. Injection moulding machine is equipped with rotary table. The main task of diploma work is to design an injection moulding machine with original shape for the future. Conception of the machine is based on present progresive technical solutions. Design of the machine tolerates main ergonomic demands and make the w

APA, Harvard, Vancouver, ISO, and other styles

6

Kűhnel, Martin. "Návrh robotického pracoviště pro lepení magnetů na DC motory." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2011. http://www.nusl.cz/ntk/nusl-229498.

Full text

Abstract:

The diploma thesis deals with the design of a general concept workplace for gluing magnets to the DC stators. The thesis is focused on the selection of industrial robots and their location, the design and the construction of end effectors for manipulation with segments and stators and the proposal of solution for engineering units on a workplace. Among the construction units belong: revolving tables with gripping systems, rotary tables on pallets and construction manipulators. At the end of the thesis the concept of the solution for workplace safety is created according to current legislation

APA, Harvard, Vancouver, ISO, and other styles

7

Balák, Pavel. "Konstrukce otočného lineárně přesuvného stolu s pevnou boční upínací deskou pro stroj FGU RT." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2013. http://www.nusl.cz/ntk/nusl-230818.

Full text

Abstract:

The aim of this diploma thesis is design of rotary-linear table with side clamping plate. Rotary-linear table is applicated to the profiled guideways used linear table. The work is focused on the design of the individuals nodes and their calculations.

APA, Harvard, Vancouver, ISO, and other styles

8

Kunorza, Michal. "Multifunkční obráběcí centrum pro rotační i nerotační obrobky." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2014. http://www.nusl.cz/ntk/nusl-231335.

Full text

Abstract:

Objective of the diploma thesis is design of multifunctional machining centre, where is machining rotating and prismatic parts enabled. Because it is large theme, thesis is solved by group. My task was to design parts of mottion axes. Diploma thesis contains complex design of machine tool from discovering optimal kinematics for required applictaion, analysis of influences acting to machine, modular concept and design solution.

APA, Harvard, Vancouver, ISO, and other styles

9

Axmann, Patrik. "NC otočný stůl s lineární osou." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2020. http://www.nusl.cz/ntk/nusl-417425.

Full text

Abstract:

This diploma thesis deals with the construction of an NC rotary table with a linear axis. The first part is devoted to the analysis of the current state of science and technology in the problem, the use of various drives, mechanisms for torque transmission, linear feed lines, measuring and an overview of tables from various manufacturers. Furthermore, the work is devoted to the creation of 4 variants of construction, then the selection of the best variant and technical calculations. At the end, the work deals with a detailed description of the machine.

APA, Harvard, Vancouver, ISO, and other styles

10

Mahmoodabadi, Majid. "KOREAN ANTHRACITE COAL CLEANING BY MEANS OF DRY AND WET BASED SEPARATION TECHNOLOGIES." UKnowledge, 2015. http://uknowledge.uky.edu/mng_etds/18.

Full text

Abstract:

Korean coals are typically high rank anthracite characterized by high ash content and difficult cleaning characteristics. The main objective of the study was to evaluate the feasibility of treating various size fractions within the coal using an assortment of physical coal cleaning technologies. Dry cleaning is preferred due to the friability of the coal. As such, three pneumatic processes were tested including Ore Sorting for the plus 10 mm material, Air Table Separation for 10 x 1 mm fraction and Tribo-electric Separator for - 1 mm fraction. The Dense Medium Cyclone is known to be one of the

APA, Harvard, Vancouver, ISO, and other styles

11

Trizna, Lukáš. "Řízení servopohonu tříosého rotačního stolku." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2017. http://www.nusl.cz/ntk/nusl-316371.

Full text

Abstract:

The aim of this master’s thesis Control of one servo-drive of three-axis rotary table is to develop a real-time motion control solution for the commercially available servo drives on the base of perspective solution available in the industry and the implementation of the chosen solution. The project includes the description of the current solution for the rotary table control, the description of suitable on the market available controllers, the rotary table control design for two selected controllers, the designed model on the base of identificated parameters of DC engine, the design of curren

APA, Harvard, Vancouver, ISO, and other styles

12

Mareček, Vojtěch. "Otočný polohovací stůl." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2008. http://www.nusl.cz/ntk/nusl-264921.

Full text

Abstract:

This diploma thesis deals with projection and general design of rotary indexing table for dedicated machine tools. The major attention is given to substitution of hydraulic drive table by table driven by servomotor, namely double axis its positions in vertical and horizontal directions. The total configuration of rotary table is solved as a construction kit, user can used any servomotor and additive gearbox. The work is concentrated to the optimization of table construction for this new designed conception. The positioning and fixing of table plate is solved by couple of Hirth couplings with c

APA, Harvard, Vancouver, ISO, and other styles

13

Tydor, Maximilián. "Univerzální senzorová testovací platforma." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2015. http://www.nusl.cz/ntk/nusl-221234.

Full text

Abstract:

This document deals with issues of testing semiconductor inertial sensors like gyroscopes and accelerometers, but also other sensors like magnetometers, inclinometers and others for aviation navigation purposes where strict requirements cover every system. The goal of this thesis is to create modular test platform for testing wide variety of sensors in different combinations under variable circumstances. The development covers mechanical design, electrical design – hardware and also control algorithm – software.

APA, Harvard, Vancouver, ISO, and other styles

14

Neumann, Ondřej. "Konstrukce multifunkčního obráběcího centra." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2013. http://www.nusl.cz/ntk/nusl-230950.

Full text

Abstract:

Design of multi-functional machining center The purpose of this diploma thesis is a design of turning table for multi-functional machining center. The first part is the background research of multi-functional machining centers, rotary tables, chip management and brief overview of chosen machining center’s manufacturers. The sphere of using of the designed machine, including parameters of turning table, and its basic parameters are determined on the basis of this research. Afterwards, the variants of turning table drives are drawn up and one variant of calculation and construction is made. Desi

APA, Harvard, Vancouver, ISO, and other styles

15

Musil, Marek. "Návrh robotického pracoviště pro obsluhu vstřikovacích lisů s následnou montáží a kontrolou." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2018. http://www.nusl.cz/ntk/nusl-382468.

Full text

Abstract:

The thesis deals with the design of a robotic workplace for the operation of injection moulding machines. It is concerned with the design of the workplace component deployment and the evaluation of the best variant using a multi-criteria assessment. In detail, attention is paid to the end effectors of industrial robots and the assembly workplace, where finishing operations take place. Finally, the risk analysis and technical and economic evaluation of the proposed workplace are carried out.

APA, Harvard, Vancouver, ISO, and other styles

16

Hanzlík, Aleš. "Konstrukce naklápěcího otočného stolu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2011. http://www.nusl.cz/ntk/nusl-229937.

Full text

Abstract:

The aim of this thesis is the design of the rotary tilting table controlled the fourth and fifth axis for CNC centrum.První part includes the search for pivotally tilting tables. The second part includes the choice of technical paremetrů pivotally tilting table for selected CNC center, design of possible options , selection of appropriate options, design of the selected option.

APA, Harvard, Vancouver, ISO, and other styles

17

Higgs, John. "The dynamical behaviour of damped, rotor assembly systems." Thesis, University of Wolverhampton, 1985. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.371858.

Full text

APA, Harvard, Vancouver, ISO, and other styles

18

Parák, Roman. "Robotický stolní fotbal - herní strategie." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2017. http://www.nusl.cz/ntk/nusl-320069.

Full text

Abstract:

The aim of the master's thesis is the robotic table football device modification and the design of game strategies. The thesis was extended by the design of technology for the robotic table football safety and the design of the Human Machine Interface (HMI). In the introduction so far developed solutions and presentation of the B&R Automation company are described. The following chapters describe mechanical solution modification, electrical wiring diagram design, creating simulation in the MATLAB development environment, resolving security issues and the subsequent application of a solution in

APA, Harvard, Vancouver, ISO, and other styles

19

Lasseigne, Alexis. "Optimization of variable-thickness composite structures. Application to a CROR blade." Thesis, Lyon, 2016. http://www.theses.fr/2016LYSEM006/document.

Full text

Abstract:

Cette thèse aborde la problématique de la conception optimale de structures composites stratifiées d’épaisseur variable. Les variables d’empilement définissent un problème d’optimisation combinatoire et des espaces de décisions de grande taille et potentiellement multimodaux. Les algorithmes d’optimisation stochastiques permettent de traiter ce type de problème et de tirer profit des performances et de l’anisotropie des plis composites pour l’allègement des structures composites stratifiées. Le but de cette étude est double : (i) développer un algorithme d’optimisation dédié aux composites str

APA, Harvard, Vancouver, ISO, and other styles

20

Evans, M. E. "Numerical analysis of error sources associated with a laser interferometer used in the calibration of rotary tables." Thesis, Swansea University, 1993. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.636933.

Full text

Abstract:

The main objective of the work was to investigate the measurement errors in an interferometer system which arise from manufacture or from the level of skill of the operator. A computer model using a ray-trace was used to simulate the use of the interferometer in calibrating a rotary table. This application of an angle measuring interferometer is currently being developed by Renishaw Transducer Systems, Ltd. as an extension to their existing product. The errors associated with this application have been investigated both in isolation and in combination. The theoretical results indicate that wit

APA, Harvard, Vancouver, ISO, and other styles

21

Kalies, Alexander [Verfasser]. "The application of lower punch vibration to improve the tableting process of a rotary tablet press / Alexander Kalies." Hamburg : Staats- und Universitätsbibliothek Hamburg Carl von Ossietzky, 2020. http://d-nb.info/1236695224/34.

Full text

APA, Harvard, Vancouver, ISO, and other styles

22

Dühlmeyer, Kym Patrick [Verfasser], and Claudia S. [Akademischer Betreuer] Leopold. "A novel method for determination of the filling level within the feed frame of a rotary tablet press / Kym Patrick Dühlmeyer ; Betreuer: Claudia S. Leopold." Hamburg : Staats- und Universitätsbibliothek Hamburg, 2020. http://d-nb.info/1207470910/34.

Full text

APA, Harvard, Vancouver, ISO, and other styles

23

Procházka, Petr. "Konstrukce jednoúčelového montážního stroje pro kompletaci rozvaděče plynu v plynovém grilu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2020. http://www.nusl.cz/ntk/nusl-417749.

Full text

Abstract:

Objective of this thesis is creating the construction of one-purpose assembly machine for combination of gas switchboard in gas grill assembly, which is top part of the gas cooking grill, consisting of stainless steel plate and burners. There are three types of burners, one small type, two medium types and one big type. Each consists of aluminium body, nozzle, ignition electrode and gas leakage protection fuse. Prior to construction itself, variant solutions of the assembly operations arrangement are designated. From those, the most appropriate one is chosen based on multicriteria weighting m

APA, Harvard, Vancouver, ISO, and other styles

24

Ying, Hsieh Tung, and 謝東嬴. "Study of Direct Drive Rotary Table." Thesis, 2011. http://ndltd.ncl.edu.tw/handle/22316022737793074421.

Full text

Abstract:

碩士<br>國立彰化師範大學<br>電機工程學系<br>99<br>After the existence of Computerized Numerical Control (CNC) machine tool with the rotary table, it is known as the forth axle of machine center, which has been essential equipment, especially important as to its function. Most of the rotary table is indirectly driven by elements such as gears, roller gear and belts with the performance of poor precision, large volume, heavy weight, big noise and low rotating speed. For the processing requirements of high speed, high accuracy and high efficiency, it reflex directly to the quality of machine tool. Moreover, the

APA, Harvard, Vancouver, ISO, and other styles

25

Lin, Cheng-Hsueh, and 林政學. "A Hydrostatic Tilting Rotary Table Design." Thesis, 2017. http://ndltd.ncl.edu.tw/handle/8488f9.

Full text

Abstract:

碩士<br>國立清華大學<br>動力機械工程學系<br>105<br>This thesis is aimed to design and fabricate a hydrostatic tilting rotary table with high loading capacity, high stiffness. According to the desired performance specifications and its application, we selected the proper type of hydrostatic bearing and analyzed the performance by experiments. This study started from design based on the desired performance and focused on calculating the flow resistance of the pockets and restrictors to obtain the optimal pressure ratio between the source and the pocket, which resulted in the required bearing stiffness. Secondly

APA, Harvard, Vancouver, ISO, and other styles

26

Lin, Min Cheng, and 林銘震. "Design and Test of Hydrostatic Rotary Table." Thesis, 2016. http://ndltd.ncl.edu.tw/handle/94014168866105653888.

Full text

Abstract:

碩士<br>國立清華大學<br>動力機械工程學系<br>104<br>With the need of high accuracy, hydrostatic bearing is often used in rotary table because of its high capacity, high stiffness and high damping. Hydrostatic bearing has been applied abroad for a long time. However, the capability of Taiwan machine-tool in hydrostatic bearing area is still quite limited. Therefore, it is intended to design hydrostatic rotary table for high precision circular grinding machine in this thesis. Comparing with roller bearing, the design and analysis of hydrostatic bearing is more difficult. In this thesis, the pressure distributio

APA, Harvard, Vancouver, ISO, and other styles

27

Sun, Wen-Po, and 孫文波. "Research on measurement of geometry errors on rotary table." Thesis, 2014. http://ndltd.ncl.edu.tw/handle/96166978663941143192.

Full text

Abstract:

碩士<br>國立臺灣大學<br>機械工程學研究所<br>102<br>Rotary axes are widely used in industry, such as in robotic arm, machine tool and coordinate measuring machines (CMM). The cutting of special curved surface, like turbine blade or helical thread, could be performed through multi-axis machine tool. To improve the accuracy of machine tools, it is important to research on the geometry errors of rotary axes. Consequently, how to measure the accuracy of rotary table is essential. There are some measurement systems that had been developed and some systems can reach high resolution. In this study, several measuremen

APA, Harvard, Vancouver, ISO, and other styles

28

Liu, Fu-Rong, and 劉馥榕. "Design and Test of Orifice-compensated Hydrostatic Rotary Table." Thesis, 2017. http://ndltd.ncl.edu.tw/handle/ap3bsz.

Full text

APA, Harvard, Vancouver, ISO, and other styles

29

Chuang, Shang-Min, and 莊尚潣. "Microgrinding Procss with Rotary Table and Nanoscaled Planarization of Optical." Thesis, 2006. http://ndltd.ncl.edu.tw/handle/41745547370598473535.

Full text

Abstract:

碩士<br>逢甲大學<br>材料科學所<br>94<br>Optical glasses, which have relatively lower hardness, would encounter brittle damage during fine surface machining process. As contract, the structural ceramics such as silicon nitride, which have much higher hardness, pose greater difficulty to obtain desirable surface quality from the mirror-finish grinding process. The theme of this research work is aimed to investigate the performance of precision grinding process of ceramics with various hardness such as silicon nitride and optical glasses using rotary table, grinding wheels (diamond, CBN, white alumina) comb

APA, Harvard, Vancouver, ISO, and other styles

30

蔡祐健. "Development and Experimentation of a Precision Aerostatic Rotary Table System." Thesis, 2011. http://ndltd.ncl.edu.tw/handle/85055502775368463477.

Full text

Abstract:

碩士<br>國立彰化師範大學<br>機電工程學系<br>99<br>The purpose of this paper is to develop the rotary table with the aerostatic bearing. The specifications of developed rotary table consists the outer diameter of 190mm, rotation accuracy of 1.0μm, respectively. In the driving system of the structure we use a direct drive (DD) motor to connected rotary table. Firstly, we employ the simplified calculation method of the structure of an aerostatic rotary table system configuration and design. And then, using the finite difference method the air bearing and double-pads annular thrust bearing performances will be an

APA, Harvard, Vancouver, ISO, and other styles

31

Tung, Hao-Lin, and 董皓麟. "Development and Verification of Expert System for a Hydrostatic Rotary Table." Thesis, 2017. http://ndltd.ncl.edu.tw/handle/2duwuh.

Full text

Abstract:

碩士<br>國立彰化師範大學<br>機電工程學系所<br>105<br>The purpose of this thesis is to develop and verify an expert system for a capillary hydrostatic rotary table with eight tons capacity. First, the engineering algorithm is used to estimate the hydrostatic system characteristics. In order to get the bearing pressure distribution the finite difference method is applied to solve the Reynolds equation. According to the bearing pressure distribution the hydrostatic system characteristics can also be obtained. Compare with the results which obtained by the above two methods to be within about 10%. The second part

APA, Harvard, Vancouver, ISO, and other styles

32

Chen, Wei-hao, and 陳威豪. "Modeling and Analysis of Thermal Deformation on Direct Drive Hydrostatic Rotary Table." Thesis, 2011. http://ndltd.ncl.edu.tw/handle/66398444651451415954.

Full text

Abstract:

碩士<br>國立雲林科技大學<br>機械工程系碩士班<br>99<br>The purpose of the research is modeling and analysis of thermal deformation on direct drive hydrostatic rotary table. At first, find heat generating in the inside of machine, and set up the thermal measurement system to obtain temperature of rotary table under machine free running in different speed. Then, study the case of structure deformation and accuracy in machine owing to temperature variation. Taking the temperature as the heat load on rotary table, use finite element simulation software ANSYS to do the modeling and analysis of thermal deformation on

APA, Harvard, Vancouver, ISO, and other styles

33

Hsu, Fu-Ting, and 徐富庭. "Optimal Tolerance Allocation for Positioning Mechanism of A Machine Tool Rotary Table." Thesis, 2014. http://ndltd.ncl.edu.tw/handle/64200807708218637245.

Full text

Abstract:

碩士<br>國立中興大學<br>機械工程學系所<br>102<br>Machinery industry usually install the APC(Automatic Pallet Changing) to improve the utilization of machine tools. The tolerance of table positioning mechanism is deeply related to the accuracy and reliability of the machine. Therefore, tolerance setting and adjustment for positioning mechanism components is an important issue to be investigated. This paper investigates on developing the optimal tolerance allocation method of the Rotary table positioning mechanism which accuracy is not enough. The method is considering the load of table, deformation, Assembly

APA, Harvard, Vancouver, ISO, and other styles

34

Jen-ShengShie and 謝振盛. "A Study of Oil Film Thickness Control on a Hydrostatic Rotary Table for Machine Tools." Thesis, 2014. http://ndltd.ncl.edu.tw/handle/7cp49d.

Full text

Abstract:

博士<br>國立成功大學<br>機械工程學系<br>102<br>Hydrostatic rotary table is supported by oil film between guideway and them. Besides, the precision of hydrostatic rotary table can be improved by oil film thickness control. Therefore, this paper presents the improvement of oil film thickness control in a hydrostatic rotary table. The hydrostatic rotary table combines the hydrostatic bearing, guideway, pressure compensation and drive system optimization and control technology in this study. For hydrostatic bearing and guideway optimization, this study developed a hydrostatic guideway with uniform pressure dist

APA, Harvard, Vancouver, ISO, and other styles

35

賴嘉慧. "A Study of Optimizing Sales System of Machine Tool Industry - An Example of Precision Rotary Table." Thesis, 2014. http://ndltd.ncl.edu.tw/handle/y6vvcm.

Full text

Abstract:

碩士<br>逢甲大學<br>電子商務碩士在職專班<br>103<br>Taiwan’s Machine Tool and its Key Components Industry brought considerable economic development which are also one of Taiwan’s main source of the financial support; Machine Tool Industry’s annual output value have reached more than TWD 100 billion， which also represents a considerable amount of foreign exchange earnings. However， in recent years， Taiwan’s Machine Tool industry market feels the pressure under the strong rise of competition of China and Korea markets. Therefore， how to stand out in the market and also to rival the other industrial power indust

APA, Harvard, Vancouver, ISO, and other styles

36

Chen, Chien-jen, and 陳建任. "Combined Microgrinding and Nanoscaled Nanopolishing process for Optical Glasses by Using Wool-Felt Wheels and Rotary Table." Thesis, 2006. http://ndltd.ncl.edu.tw/handle/27998845509347786383.

Full text

Abstract:

碩士<br>逢甲大學<br>材料科學所<br>94<br>In the first stage of our mechanochemical microgrinding process, optical glasses were planarized in a reciprocal grinding mode by using ceria oxide abrasive slurry and fine-grit diamond wheels. Subsequently, the workpiece attached onto a speed-controlled rotary table was polished by wool felt wheels combined with ultrafine oxide (CeO2, SiO2, Al2O3, and Fe2O3) abrasive slurry to attain a subtle removal rate for the requirements of nanoplanarization. A subsystem of oxide abrasive slurry smoothly pumped into the contact region between superabrasive wheel and optical g

APA, Harvard, Vancouver, ISO, and other styles

37

Hsu, Cheng-Feng, and 徐建峰. "A study of Cutting Blades from disk Body Using Manual Operated Rotary Table and 4-axis Machining Center." Thesis, 1999. http://ndltd.ncl.edu.tw/handle/19129083214047662379.

Full text

Abstract:

碩士<br>中華大學<br>機械與航太工程研究所<br>87<br>It is known from previous study that blades of an air compressor were machined directly from aluminum alloy disk body using 3-axis CNC machining center with a manual operated A-axis rotary table.The result reveals that the rotaried has to be rotaried several times in order to cut one half-blade surface. Besides, it involves techniques for surface dividing and mesh pattern recognition about whether or not the patch surface can be accessed by the cutting tool, especially for the highly twisted rotor blades of an air compressor. In order to overcome di

APA, Harvard, Vancouver, ISO, and other styles

38

TSAI, CHIN MING, and 蔡誌銘. "Development of a A-C Rotary Table for a Meso-scale 5-axis Machine Tool and the Optimal Micro-milling Parameters for the Oxygen Free Copper." Thesis, 2013. http://ndltd.ncl.edu.tw/handle/02405461169330510223.

Full text

Abstract:

碩士<br>國立臺灣科技大學<br>機械工程系<br>101<br>This study presents the development of A-C rotary table for a Meso-scale 5-axis milling machine and the determination of the optimal micro-milling parameters. The whole five-axis Meso-scale milling machine feeding mechanism is constructed from three structures which are X Y coplanar stage, a Z-axis mechanism and A-C rotating table. With regard to the determination of the optimal micro-milling parameters, the quality characteristicis the minimum surface roughness of the milled surface.The surface is finished by a micro mill with diameter of 0.1 mm. The Taguchi’

APA, Harvard, Vancouver, ISO, and other styles

39

Tsai, Payee, and 蔡培毅. "Design of Rotary Tables Using Roller Gear Cam Mechanisms." Thesis, 2000. http://ndltd.ncl.edu.tw/handle/33663526487147279466.

Full text

Abstract:

碩士<br>國立中山大學<br>機械工程學系研究所<br>88<br>Rotary tables are generally regarded as the forth axis of machining tools. Traditionally, gear sets are used as reducers in the rotary tables. In order to improve the positioning accuracy, load and efficiency of rotary tables, a rotary table which applies the roller gear cam reducer is proposed. From the deduction of the theory, applications of roller gear cam reducers in the industries can be achieved. This thesis is focused on developing the procedure as follows: Firstly, the type of roller gear cam reducer and design parameters are identified. Secondly,

APA, Harvard, Vancouver, ISO, and other styles

40

TANG, CHUNG-YEN, and 唐崇嚴. "Performance Evaluation and Thermal Analysis of Hydrostatic Rotary Tables." Thesis, 2018. http://ndltd.ncl.edu.tw/handle/83h2u8.

Full text

APA, Harvard, Vancouver, ISO, and other styles

41

chen, nan-chung, and 陳南忠. "The Development of The Automatic Inspection of Coordinate Measuring Auxiliary Rotary Tables." Thesis, 2008. http://ndltd.ncl.edu.tw/handle/62566986607626146724.

Full text

Abstract:

碩士<br>國立臺灣科技大學<br>機械工程系<br>96<br>The purpose of this thesis is to develop an automatic device of coordinate measuring auxiliary rotary tables inspection system for workpiece. The developed inspection system is composed of several modules including a coordinate measuring system, electronic control , mechanism module and metrology. A rotary tables inspection device has been developed with motion controller. This developed system can measure the space contour as well as the space angle and the diploplan of the workpiece.

APA, Harvard, Vancouver, ISO, and other styles

42

Neuhaus, Thorsten [Verfasser]. "Investigation and optimisation of the presster : a linear compaction simulator for rotary tablet presses / Thorsten Neuhaus." 2007. http://d-nb.info/985711671/34.

Full text

APA, Harvard, Vancouver, ISO, and other styles

43

Dwivedi, Sarvajna Kumar. "Analysis of particle deformation mechanisms and compact expansion during compaction on a high speed rotary tablet press." Thesis, 1992. http://hdl.handle.net/2429/2963.

Full text

Abstract:

Pharmaceutical tablets are the most widely used dosage form and are prepared by the high speed compaction of powders or granules in a die on a rotary tablet press. The tablets produced must be coherent and capable of withstanding the stresses of handling and transportation. Successful compact formation depends on the ability of the particles to deform and form interparticulate bonds during compression in the die and the ability of these bonds to withstand elastic expansion during decompression and ejection from the die. Compaction on the high speed rotary presses used in the pharmaceu

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!