Log in

Relevant bibliographies by topics / Rotor resistance / Dissertations / Theses

To see the other types of publications on this topic, follow the link: Rotor resistance.

Dissertations / Theses on the topic 'Rotor resistance'

Author: Grafiati

Published: 28 May 2022

Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 36 dissertations / theses for your research on the topic 'Rotor resistance.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse dissertations / theses on a wide variety of disciplines and organise your bibliography correctly.

1

Smiai, Mohamed Salah. "Speed control of wound-rotor induction motor using thyristors to control rotor external resistance." Thesis, University of Bradford, 1989. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.253409.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Burnham, David James. "Control of wind turbine output power via a variable rotor resistance." Thesis, [Austin, Tex. : University of Texas, 2009. http://hdl.handle.net/2152/ETD-UT-2009-05-105.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Костель, А., Віталій Іович Симоновський, Виталий Иович Симоновский та Vitalii Iovych Symonovskyi. "Исследование нелинейных колебаний ротора турбокомпрессора на магнитных подшипниках". Thesis, Сумский государственный университет, 2018. http://essuir.sumdu.edu.ua/handle/123456789/67530.

Full text

Abstract:

В результате исследования методом численного интегрирования нелинейных колебаний ротора с помощью этой модели были получены зависимости граничной по устойчивости частоты вращений от ряда параметров подшипников и уплотнений, выявлены закономерности влияния этих параметров.

APA, Harvard, Vancouver, ISO, and other styles

4

Сумцова, Н. О., Віталій Іович Симоновський, Виталий Иович Симоновский та Vitalii Iovych Symonovskyi. "Исследование устойчивости вращения ротора турбокомпрессора на сегментных подшипниках". Thesis, Сумский государственный университет, 2018. http://essuir.sumdu.edu.ua/handle/123456789/67531.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Позовный, А. А. "Радиальные силы и расходы в многощелевых уплотнениях". Thesis, Сумский государственный университет, 2015. http://essuir.sumdu.edu.ua/handle/123456789/39781.

Full text

Abstract:

В центробежных насосах для уменьшения объемных потерь применяют многощелевые уплотнения. Однако из опыта эксплуатации высокооборотных насосов известно, что в некоторых случаях такие уплотнения вызывают повышенную вибрацию ротора. Радиальная гидростатическая сила в многощелевых уплотнениях может быть направлена в сторону увеличения эксцентриситета ротора.

APA, Harvard, Vancouver, ISO, and other styles

6

Gao, Zhi. "Sensorless Stator Winding Temperature Estimation for Induction Machines." Diss., Georgia Institute of Technology, 2006. http://hdl.handle.net/1853/13966.

Full text

Abstract:

The organic materials used for stator winding insulation are subject to deterioration from thermal, electrical, and mechanical stresses. Stator winding insulation breakdown due to excessive thermal stress is one of the major causes of electric machine failures; therefore, prevention of such a failure is crucial for increasing machine reliability and minimizing financial loss due to motor failure. This work focuses on the development of an efficient and reliable stator winding temperature estimation scheme for small to medium size mains-fed induction machines. The motivation for the stator

APA, Harvard, Vancouver, ISO, and other styles

7

Боярський, Дмитро Павлович, Дмитрий Павлович Боярский, Dmytro Pavlovych Boiarskyi та Д. О. Кайота. "Комп'ютерне моделювання механізму змащення упорного колодкового підшипника ковзання". Thesis, Сумський державний університет, 2015. http://essuir.sumdu.edu.ua/handle/123456789/39812.

Full text

Abstract:

Однією з основних задач при розробці та експлуатації турбокомпресорних агрегатів є забезпечення осьової стійкості роторів. Упорні підшипники повинні надійно утримувати неврівноважені осьові сили, що виникають при будь-яких можливих режимах роботи турбокомпресорних агрегатів (ТКА). У процесі експлуатації ТКА відбуваються зміни в ущільнювальних зазорах у проточних частинах і відповідно відбувається перерозподіл тиску, що призводить до істотного відхилення умов роботи упорного підшипника від тих на які він проектувався.

APA, Harvard, Vancouver, ISO, and other styles

8

Vácha, Pavel. "Výpočet jednofázového asynchronního motoru." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2011. http://www.nusl.cz/ntk/nusl-219186.

Full text

Abstract:

The master´s thesis deal with the thesis of a single-phase induction motor that is more and more used all over the world. Its aim is assembling the information about this type of motor and its calculation. The content of the first part is the theoretical analysis of a single-phase induction motor and acquirement ways of the stroke moment. Than the work contains a project of basic schema of the single-phase induction motor with an auxiliary phase. The practical part is devoted to an elaboration of demonstration example of the single-phase induction motor with concrete parameters calculation, it

APA, Harvard, Vancouver, ISO, and other styles

9

Dohnal, Ivo. "Numerická simulace svařování lopatky a rotoru turbíny." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2010. http://www.nusl.cz/ntk/nusl-229216.

Full text

Abstract:

Numeric simulation welding of the turbine vane and rotor - master’s thesis is ordered by the Siemens Industrial Turbomachinery ltd. company. Simulation welding is done in program SYSWELD. Used welding materials are X22CrMoV12-1 (turbine vane), 30CrMoNiV5-11 (rotor), TOPCORE 838 B (additional material). These are temperature-resistant and fire-resistant welding materials. The SYSWELD program works on the principle of finite elements method. By SYSWELD is done the evaluation of temperature and stress fields and material structure after welding. Here is a part , which deals with computations of w

APA, Harvard, Vancouver, ISO, and other styles

10

Štaffa, Jiří. "Ztráty jednofázového asynchronního motoru s trvale připojeným kondenzátorem." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2015. http://www.nusl.cz/ntk/nusl-221263.

Full text

Abstract:

This project deals with increasing efficiency of one phase induction motor with permanent split capacitor. We can whole thesis divide into two parts, the first one is basic and the second is interested in analysis and measurement. First part handles with construction of single phase induction motor, explanation of function principle, start and run of motor. Calculating of efficiency including type of losses, which reduce efficiency. Second part concerns analysis losses including moment load characteristic, motor measurement while rotor is locked, with no load operation, measuring mechanical an

APA, Harvard, Vancouver, ISO, and other styles

11

Záškoda, David. "Parametrické zkoušky plazmové svařování kořene svaru." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2010. http://www.nusl.cz/ntk/nusl-229349.

Full text

Abstract:

The subject of this thesis is to assess the suitability of the new process of welding roots of welds by the rotors of steam turbines plasma jet. The new proposed method uses a combination of welding the weld root plasma with the method of submerged-arc welding, however the submerged-arc welding is not subjekt of this work. The tests performed were verified by the possibility of welding the weld root of the plasma jet – Keyhole method without filler material. The aim was to find the optimum welding parameters to achieve the required weld quality, particularly with regard to geometry of weld. Tu

APA, Harvard, Vancouver, ISO, and other styles

12

Lu, Bin. "Energy Usage Evaluation and Condition Monitoring for Electric Machines using Wireless Sensor Networks." Diss., Georgia Institute of Technology, 2006. http://hdl.handle.net/1853/14152.

Full text

Abstract:

Energy usage evaluation and condition monitoring for electric machines are important in industry for overall energy savings. Traditionally these functions are realized only for large motors in wired systems formed by communication cables and various types of sensors. The unique characteristics of the wireless sensor networks (WSN) make them the ideal wireless structure for low-cost energy management in industrial plants. This work focuses on developing nonintrusive motor-efficiency-estimation methods, which are essential in the wireless motor-energy-management systems in a WSN architecture t

APA, Harvard, Vancouver, ISO, and other styles

13

Hansen, Tarrant William. "Evaluation of molecular methods used for the rapid detection of multi-drug resistant Mycobacterium tuberculosis." Thesis, Queensland University of Technology, 2008. https://eprints.qut.edu.au/20723/1/Tarrant_Hansen_Thesis.pdf.

Full text

Abstract:

Tuberculosis remains a major public health issue globally, with an estimated 9.2 million new cases in 2006. A new threat to TB control is the emergence of drug resistant strains. These strains are harder to cure as standard anti-tuberculosis first line treatments are ineffective. Multi Drug Resistant Tuberculosis (MDR-TB) is defined as Mycobacterium tuberculosis that has developed resistance to at least rifampicin and isoniazid, and these strains now account for greater than 5% of worldwide cases. Mutations within the Rifampicin Resistance Determining Region (RRDR) of the rpoB gene are pre

APA, Harvard, Vancouver, ISO, and other styles

14

Hansen, Tarrant William. "Evaluation of molecular methods used for the rapid detection of multi-drug resistant Mycobacterium tuberculosis." Queensland University of Technology, 2008. http://eprints.qut.edu.au/20723/.

Full text

Abstract:

Tuberculosis remains a major public health issue globally, with an estimated 9.2 million new cases in 2006. A new threat to TB control is the emergence of drug resistant strains. These strains are harder to cure as standard anti-tuberculosis first line treatments are ineffective. Multi Drug Resistant Tuberculosis (MDR-TB) is defined as Mycobacterium tuberculosis that has developed resistance to at least rifampicin and isoniazid, and these strains now account for greater than 5% of worldwide cases. Mutations within the Rifampicin Resistance Determining Region (RRDR) of the rpoB gene are pre

APA, Harvard, Vancouver, ISO, and other styles

15

YADAV, ASHUTOSH. "STATIC ROTOR RESISTANCE CONTROL OF INDUCTION MOTOR." Thesis, 2016. http://dspace.dtu.ac.in:8080/jspui/handle/repository/15301.

Full text

Abstract:

this thesis the hardware prototype for static rotor resistance control is developed. Speed of the three phase wound rotor induction motor is controlled by varying the rotor resistance. The variation of rotor resistance is done by controlling the MOSFET using pulse width modulation (PWM). The switching action of MOSFET is controlled by the arduino microcontroller. The switching gate pulse is generated by the arduino microcontroller, which controls the duty ratio of MOSFET switch. The duty ratio of switch varies the rotor resistance and controls the wound rotor induction motor speed. PSIM9.1.1 i

APA, Harvard, Vancouver, ISO, and other styles

16

Hsu, Yung-Chich, and 徐雍智. "Application of Rotor Detection by Giant Magneto-resistance Sensing." Thesis, 2009. http://ndltd.ncl.edu.tw/handle/78212012945874935022.

Full text

Abstract:

碩士<br>國立清華大學<br>動力機械工程學系<br>97<br>As the technology advances along with civilization, electric motors has gained increasing applications in our lives; meanwhile, because brushless DC motors (BLDCM) are so advantageous compared to conventional motors together with advent of new design and material technology, the costs of BLDCM has reduced significantly so that many commercial products have adopted BLDCM today. But, Hall sensors, serving as the key magnetic pole detection devices in BLDCM, have been assessed with comments for low sensitivity and high temperature drifts. On the contrast, magne

APA, Harvard, Vancouver, ISO, and other styles

17

ZHENG, HONG-LIANG, and 鄭宏良. "Starting control of a wound-rotor induction motor by chopper controlled resistance in the rotor circuit." Thesis, 1988. http://ndltd.ncl.edu.tw/handle/01124884219304233095.

Full text

APA, Harvard, Vancouver, ISO, and other styles

18

黃冠達, Guan-Da Huang, and 黃冠達. "Development and Application of a Multi-pole Magnetorheological Resistance with Exterior Rotor." Thesis, 2013. http://ndltd.ncl.edu.tw/handle/watw9j.

Full text

Abstract:

碩士<br>國立臺北科技大學<br>車輛工程系所<br>101<br>MRF is an intelligent liquid with outstanding performance. By the change of magnetic field, it can produce different shear stress. The relationship between shear stress and the magnetic field of MR fluid is near linear. The transformation is also quick and reversible. Those excellent characteristics enable the possibility for industrial application, such as vehicles, biomedical, robotics, etc. Tradition MR brake contains a cylinder with coil winded surrounding. The MRF is filled between stator and the inner disk. MR fluid is place under the magnetic field cre

APA, Harvard, Vancouver, ISO, and other styles

19

Chang, Ren-Jye, and 張仁杰. "Nonlinear adaptive sensorless speed control for induction motors considering rotor resistance variation." Thesis, 1997. http://ndltd.ncl.edu.tw/handle/96270017087503668651.

Full text

Abstract:

碩士<br>國立臺灣大學<br>電機工程學系<br>85<br>In this thesis, a nonlinear adaptive sensorless speed controller for inductionmotors is proposed. In the controller, only the stator currents are assumed tobe measurable. Flux observers and rotor speed estimator are designed to relaxthe need of flux and speed measurement. Besides, an estimator is also designedto overcome drifting problem of the rotor resistance. Rigorous stability analysisbased on Lyapunov theory is also performed to guarantee that the contro

APA, Harvard, Vancouver, ISO, and other styles

20

Chen, Jenn-Yih, and 陳進益. "Passivity-Based Position Control and Rotor Resistance Estimation for an Induction Motor." Thesis, 2002. http://ndltd.ncl.edu.tw/handle/72324371792739352569.

Full text

Abstract:

博士<br>國立臺灣科技大學<br>電機工程系<br>90<br>This dissertation presents passivity-based adaptive control and sliding mode control schemes for the position control of an induction motor. First, the mathematical model of the induction motor in the synchronously rotating reference frame is derived from the three-phase circuit via the coordinate transformation. There is no need to design a rotor flux observer when the electrical parameters of the induction motor are known. The dynamics of the induction motor and the position controllers are analyzed to be passive by the passivity theorem. Furthermore, one can

APA, Harvard, Vancouver, ISO, and other styles

21

Syu, Yan-Siang, and 許硯翔. "Design of Rotor Resistance Estimator and Adaptive Position Controller for Induction Motors." Thesis, 2012. http://ndltd.ncl.edu.tw/handle/znm53z.

Full text

Abstract:

碩士<br>國立虎尾科技大學<br>創意工程與精密科技研究所<br>100<br>This thesis proposes the parameters estimation and position control of induction motors by using the composite adaptation scheme. Firstly, in the rotor reference frame, the input-output linearization theory was employed to decouple the mechanical rotor position and the rotor flux amplitude at the transient state. An open-loop current model rotor flux observer estimates the flux, and then the adaptation laws estimate the rotor resistance, moment of inertia, viscous friction coefficient, and load torque. The passive properties of the flux observer, rotor

APA, Harvard, Vancouver, ISO, and other styles

22

Wang, Yen-Kai, and 王衍凱. "EKF-based rotor and stator resistance estimation in speed sensorless control of IMs." Thesis, 2010. http://ndltd.ncl.edu.tw/handle/25853837561782475094.

Full text

Abstract:

碩士<br>國立臺灣科技大學<br>機械工程系<br>98<br>The system parameters of induction motor(IM) vary with different operating conditions. The temperature-dependent variation of the stator and rotor resistance, which induces a large estimation error on speed and flux, has been a critical issue for speed-sensorless control. On speed-sensorless control, the observer is as important as the controller. The noise immunity and real time estimation ability of Extended Kalman filter(EKF)-based observer lead to a popular application in the field of speed-sensorless control. However, the simultaneous estimation of stator

APA, Harvard, Vancouver, ISO, and other styles

23

Lee, Jiann Yih, and 李建毅. "The Design of Speed and Rotor Resistance Estimators for the Vector-Controlled Inverter." Thesis, 1996. http://ndltd.ncl.edu.tw/handle/57587492395958923541.

Full text

Abstract:

碩士<br>國立臺灣科技大學<br>電機工程研究所<br>84<br>The purpose of this thesis is to investigate the application of rotor speed estimation and rotor resistance estimation techniques in achieving the sensorless speed control of a vector-controlled inverter. The thesis also evaluates the sensitivity of rotor flux observers as the induction motor parameters vary. In hardware implementation the 80196MC single- chip microcomputer is untilized for developing the control software. The rotor flux is estimated based

APA, Harvard, Vancouver, ISO, and other styles

24

Ke, Zhi-Sheng, and 柯志昇. "Sensorless Vector Controlled Induction Motor Drive with Stator and Rotor Resistance Parameter Identification." Thesis, 2014. http://ndltd.ncl.edu.tw/handle/56455842405303076887.

Full text

Abstract:

碩士<br>國立勤益科技大學<br>電機工程系<br>102<br>Automatic production facilities require numerous motors to actuate mechanical load. Direct current (DC) motors demand frequent maintenance requirements and are unsuitable for dirty and explosive environments because of the presence of brushes and commutators. The sensorless FOC approaches, which utilize flux linkage and speed estimation methods, have been extensively used to replace the conventional FOC IM drives. 　　In this thesis, a sensorless rotor field orientation controlled induction motor drive based on voltage space vector plus width modulation is estab

APA, Harvard, Vancouver, ISO, and other styles

25

Weng, Yi-Xiang, and 翁翊翔. "Study of Fuzzy Principle for Rotor Resistance Compensation in Speed-Sensorless Induction Motor Drives." Thesis, 2006. http://ndltd.ncl.edu.tw/handle/27997920602752276983.

Full text

Abstract:

碩士<br>國立成功大學<br>工程科學系碩博士班<br>94<br>In the past, Volt / frequency (V/f) control is an open loop scalar control for induction motor (IM). V/f control is the standard operating method and is more than sufficient for most drive tasks. It is somewhat simple to implement, but the inherent coupling effect gives sluggish response and the system is easily prone to instability because of a high-order system effect. To overcome this difficulty, the foregoing problems can be solved by the field-oriented control (FOC). Conventional variable-speed motor drivers require the use of a speed sensor mounted at s

APA, Harvard, Vancouver, ISO, and other styles

26

Lee, An-Ming, and 李安明. "Nonlinear Adaptive Speed and Torque Servo Control of Induction Motors with Unknown Rotor Resistance." Thesis, 1996. http://ndltd.ncl.edu.tw/handle/93541907705286384032.

Full text

Abstract:

碩士<br>國立臺灣大學<br>電機工程研究所<br>84<br>In this thesis, we propose a nonlinear adaptive speed and torque controller of induction motors with unknown rotor resistance and build a voltage-driven induction motor driver. All the system parameters except rotor resistance are assumed to be known and only the stator currents and rotor speed are assumed to be available. The desired speed and torque should be any continuously differentiable bounded function. A complete proof of the global stability without

APA, Harvard, Vancouver, ISO, and other styles

27

Reed, David M. Hofmann Heath F. "Direct field-oriented control of an induction machine using an adaptive rotor resistance estimator." 2009. http://etda.libraries.psu.edu/theses/approved/WorldWideIndex/ETD-4238/index.html.

Full text

APA, Harvard, Vancouver, ISO, and other styles

28

Fang, Chih-Kuo, and 方治國. "Speed sensorless Indirect-Field-Oriented Control of Induction Motor Drive with Rotor Resistance Adaptation." Thesis, 1997. http://ndltd.ncl.edu.tw/handle/09572644585527960761.

Full text

Abstract:

碩士<br>國立中央大學<br>電機工程學系<br>85<br>In this paper, speed sensorless indirect-field-oriented control of inductionmotor drive with rotor resistance adaptation is presented. Several field-oriented induction motor drive methods without rotational transducershave been proposed. These methods have a disadvantage that the rotor resistance variation causes estimation error of the motor speed. Therefore, simultaneous estimation of the motor speed and the rotor resistance is required. First, this paper p

APA, Harvard, Vancouver, ISO, and other styles

29

Chin-Yu, Tsai, and 蔡錦煜. "Nonlinear Sensorless Indirect Adaptive Position and Speed Control of Induction Motor with Unknown Rotor Resistance." Thesis, 1999. http://ndltd.ncl.edu.tw/handle/41881096632407579807.

Full text

Abstract:

碩士<br>國立臺灣大學<br>電機工程學研究所<br>87<br>In this thesis, a nonlinear indirect adaptive sensorless speed/position tracking controller for induction motors is proposed. In the controller, only the stator currents are assumed to be measurable. The rotor flux, position and speed observer are designed to relax the need of flux and position measurement. Besides, the rotor resistance estimators are also designed to cope with the drifting problem. Rigorous stability analysis based on Lyapunov theory is also performed to guarantee that the controller des

APA, Harvard, Vancouver, ISO, and other styles

30

Lin, Yu-Chao, and 林郁超. "Nonlinear Sensorless Indirect Adaptive Speed Control of Induction Motor with Unknoen Rotor Resistance and Load." Thesis, 1998. http://ndltd.ncl.edu.tw/handle/68668568647395009161.

Full text

Abstract:

碩士<br>國立臺灣大學<br>電機工程學系<br>86<br>In this thesis, a nonlinear indirect adaptive sensorless speed and flux tracking controller for induction motors is proposed. In the controller, only the stator currents are assumed to be measurable. Flux observers and rotor speed estimator are designed to relax the need of flux and speed measurement. Besides, two estimators are also designed to overcome drifting problem of the rotor resistance and unknown load torque. Rigorous stability analysis

APA, Harvard, Vancouver, ISO, and other styles

31

Liou, Yi-Jr, and 劉奕志. "Nonlinear adaptive speed tracking control of induction motors with unknown rotor resistance and load torque." Thesis, 1997. http://ndltd.ncl.edu.tw/handle/18786891835156169223.

Full text

Abstract:

碩士<br>國立臺灣大學<br>電機工程學系<br>85<br>In this thesis, we propose a nonlinear adaptive speed tracking controller for induction motors with unknown rotor resistance and load torque parameters. Only the stator currents and the rotor speed are assumed to be measurable. The desired speed should be any continuously differentiable boundedfunction. We alsogive a complete proof of global stability withoutsingularities which shows that the output error converges to zeroasymptotically. Finally, the simulati

APA, Harvard, Vancouver, ISO, and other styles

32

Hsu, Shuen-Jan, and 許舜然. "Artificial Intelligence based Rotor Resistance and Speed Estimation in Speed-Sensorless Control of Induction Motor." Thesis, 2016. http://ndltd.ncl.edu.tw/handle/15869271042286619140.

Full text

Abstract:

碩士<br>國立臺灣科技大學<br>機械工程系<br>104<br>The performance of sensorless control of induction motors (IMs) is dramat- ically affected by the variation of parameters such as rotor resistance especially at low speeds and heavy loads. A novel hybrid artificial neural network (HANN), including a cerebellar model adaptive controller (CMAC) and an adaptive linear element (ADALINE), is developed in this thesis to estimate the rotor resistance and the motor speed simultaneously. On the other hand, a self-tuning PI-type fuzzy logic controller (FLC) is used to achieve motor speed control based on the speed estim

APA, Harvard, Vancouver, ISO, and other styles

33

SONKAR, AVINASH. "ROTOR RESISTANCE ESTIMATION USING REACTIVE POWER BASED MRAS TECHNIQUE OF VECTOR CONTROL OF INDUCTION MOTOR." Thesis, 2015. http://dspace.dtu.ac.in:8080/jspui/handle/repository/16297.

Full text

Abstract:

The induction motors are the most famous and widely used machines in most of the industrial as well as in domestic applications due to its simplicity and low cost. When the variable speed applications are required the induction machines are used. For induction machines, variable speed drives requires both fast torque response as well as wide operating range of speed. Indirect vector control of induction motor is somewhat predictive method, where the speed of the rotor flux is predicted from slip speed and rotor speed. The rotor speed may be obtained either from the estimation method or from sp

APA, Harvard, Vancouver, ISO, and other styles

34

Bhattacharya, Tanmoy. "Flux Estimation, Parameter Adaptation And Speed Sensorless Control For Vector Controlled Induction Motor Drive." Thesis, 2005. https://etd.iisc.ac.in/handle/2005/1406.

Full text

APA, Harvard, Vancouver, ISO, and other styles

35

Bhattacharya, Tanmoy. "Flux Estimation, Parameter Adaptation And Speed Sensorless Control For Vector Controlled Induction Motor Drive." Thesis, 2005. http://etd.iisc.ernet.in/handle/2005/1406.

Full text

APA, Harvard, Vancouver, ISO, and other styles

36

(7040813), Miguel A. Alvarez Gonzales. "ESTABLISHMENT OF HIGH-THROUGHPUT TECHNIQUES FOR STUDYING STARCH FUNCTIONALITIES." Thesis, 2019.

Find full text

Abstract:

<p>Maize is one of the top sources of food starch. Industrial use of starch is mostly in its native form and used due to their functional and structural properties. Native starch properties and functionalities have been altered using chemical. An alternative for the development of native starch substituents with desirable starch properties is the use of mutagenesis techniques to increase genetic variation in maize kernels. With this approach, a highly diverse library of native starches with different properties are produced. Traditional analysis of the functional and structural properties requ

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!