Relevant bibliographies by topics / Rotor spun yarn properties

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Book chapters
  4. Conference papers

Academic literature on the topic 'Rotor spun yarn properties'

Author: Grafiati
Published: 4 June 2021
Last updated: 11 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Rotor spun yarn properties.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Rotor spun yarn properties"

1

Cui, Rui Fang, and Xiang Hong Li. "Study on Properties of Hard Twist Cotton Yarn." Advanced Materials Research 1028 (September 2014): 20–24. http://dx.doi.org/10.4028/www.scientific.net/amr.1028.20.

Full text
Abstract:
Ring-spun cotton yarn and rotor-spun yarn with hard twist factor were manufactured. It shows that yarn breaking strength varies slightly with twist factor, either ring-spun yarn or rotor-spun yarn. Twist factor has little effect on yarn breaking elongation. Yarn number has effect on yarn hairiness for ring-spun yarn and rotor-spun yarn. Coarser yarn has more hairiness than fine yarn. Ring-spun yarn hairiness is higher than rotor-spun yarn. Twist factor has some effect on coarse yarn uniformity while it affects fine yarn uniformity slightly. Ring-spun yarn has higher strength than rotor-spun ya
APA, Harvard, Vancouver, ISO, and other styles
2

Ghanmi, Hanen, Adel Ghith, and Tarek Benameur. "Open-End Yarn Properties Prediction Using HVI Fibre Properties and Process Parameters." Autex Research Journal 17, no. 1 (2017): 6–11. http://dx.doi.org/10.1515/aut-2015-0026.

Full text
Abstract:
AbstractThis article provides three models to predict rotor spun yarn characteristics which are breaking strength, breaking elongation and unevenness. These models used noncorrelated raw material characteristics and some processing parameters. For this purpose, five different cotton blends were processed into rotor spun yarns having different metric numbers (Nm10, Nm15, Nm18, Nm22, Nm30 and Nm37). Each count was spun at different twist levels. Response surface method was used to estimate yarn quality characteristics and to study variable effects on these characteristics. In this study, predict
APA, Harvard, Vancouver, ISO, and other styles
3

Gopalakrishnan, K. "A Study on Properties of Modified Rotor Spun Yarn." International Journal of Trend in Scientific Research and Development Volume-2, Issue-5 (2018): 653–58. http://dx.doi.org/10.31142/ijtsrd15913.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Moučková, Eva, Iva Mertová, Petra Jirásková, Gabriela Krupincová, and Dana Křemenáková. "Properties Of Viscose Vortex Yarns Depending On Technological Parameters Of Spinning." Autex Research Journal 15, no. 2 (2015): 138–47. http://dx.doi.org/10.2478/aut-2014-0046.

Full text
Abstract:
AbstractThis paper analyzes the relationship between technological parameters of spinning of 100% CV Vortex yarns of different counts and its selected geometrical parameters (a lead of helix of wrapping fibre ribbon, yarn diameter) as well as yarn properties. The number of twist of wrapping fibre layer is determined. The effect of the yarn delivery speed, hollow spindle diameter, and the main draft on the hairiness, mass irregularity, tenacity, elongation, resistance to abrasion and bending rigidity of Vortex yarn is observed. The yarn properties are compared with the properties of open-end ro
APA, Harvard, Vancouver, ISO, and other styles
5

KILIC, MUSA, H. KÜBRA KAYNAK, GONCA BALCI KILIC, MURAT DEMIR, and EFLATUN TIRYAKI. "Effects of waste cotton usage on properties of OE-rotor yarns and knitted fabrics." Industria Textila 70, no. 03 (2019): 216–22. http://dx.doi.org/10.35530/it.070.03.1560.

Full text
Abstract:
The use of recycled materials has gained massive importance in textile sector as well as in other sectors as the effects of reduction of natural sources are felt all over the world. In this study, it was aimed to analyse the effects of recycled cotton usage on properties of OE-rotor spun yarns and knitted fabrics produced from these yarns. For this purpose, OE-rotor yarns were produced at different proportion levels of virgin cotton and waste cotton that derived from blowroom 25%, 50%, 75%, 100%, respectively. For better assessment, properties of OE-rotor yarns that contain waste cotton were c
APA, Harvard, Vancouver, ISO, and other styles
6

Yadollah Roudbari, Babak, and Safdar Eskandarnejad. "Effect of Some Navels on Properties of Cotton/Nylon66 Blend (1 : 1) Rotor Spun Yarn and Wrapper Formation: A Comparison between Rotor and Ring Spun Yarn." Journal of Textiles 2013 (March 13, 2013): 1–6. http://dx.doi.org/10.1155/2013/262635.

Full text
Abstract:
Use of nylon/cotton blend yarn in military uniform is common and due to advantages in its fabric in comparison to 100% cotton fabrics, capabilities of military uniforms have been improved. In this study the effects of navel type on properties of (50%-50%) nylon/cotton blend yarn and wrapper formation were investigated and compared with similar ring spun yarn. Rotor spun yarn was produced on a single head laboratory rotor spinning machine with four navels (smooth, spiral, 3 grooved, and 4 grooved) and ring yarn was produced on a zinser 319 ring spinning machine. Test result showed that navel ty
APA, Harvard, Vancouver, ISO, and other styles
7

Tao, X. M., W. K. Lo, and Y. M. Lau. "Torque-Balanced Singles Knitting Yarns Spun by Unconventional Systems." Textile Research Journal 67, no. 10 (1997): 739–46. http://dx.doi.org/10.1177/004051759706701006.

Full text
Abstract:
This paper is the first part of a series reporting on the recent development of a yarn modification process to produce torque-balanced singles spun yarns. Taking advantage of the core-sheath structure of unconventionally spun yarns, we have developed a yarn modification process and applied it to singles yarns spun by rotor spinning, producing torque-free singles yarns from 100% cotton fibers. The spirality of the resultant single jersey knit fabrics is greatly reduced or, in some cases, completely eliminated. Properties and performance characteristics of both parent and modified yarns, as well
APA, Harvard, Vancouver, ISO, and other styles
8

Basu, Arindam. "Influence of Yarn Structural Parameters on Rotor-spun Yarn Properties." Journal of the Textile Institute 91, no. 1 (2000): 179–82. http://dx.doi.org/10.1080/00405000008659498.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Shanbeh, Mohsen, Majid Safar Johari, Mohammad Zarrebini, Marcin Barburski, Agnieszka Komisarczyk, and Mariusz Urbaniak. "Effect of a weft yarn spinning system on the shear characteristics of plain woven fabrics." Textile Research Journal 90, no. 1 (2019): 10–23. http://dx.doi.org/10.1177/0040517519855315.

Full text
Abstract:
Spun yarns are almost entirely produced using ring, rotor and relatively new air vortex spinning systems. In this study, shear properties of fabrics woven with cotton, viscose, and polyester yarns spun using ring, rotor, and vortex spinning systems were investigated. Experimentally determined shear characteristic-related factors, such as initial shear rigidity, shear rigidity, shear hysteresis at a 0.5 degree shear angle, and shear hysteresis at a 5 degree shear angle along the principle directions, were statistically analyzed. In addition, differences between the shear behaviors of the woven
APA, Harvard, Vancouver, ISO, and other styles
10

Awgichew, Dessalegn, S. Sakthivel, Eshetu Solomon, et al. "Experimental Study and Effect on Recycled Fibers Blended with Rotor/OE Yarns for the Production of Handloom Fabrics and Their Properties." Advances in Materials Science and Engineering 2021 (August 13, 2021): 1–9. http://dx.doi.org/10.1155/2021/4334632.

Full text
Abstract:
The uses of recycled materials have gained massive importance in the textile sector and other application areas as the effects of reducing natural resources are felt worldwide. This study aimed to analyze the effects of recycled fiber usage on the properties of OE-rotor spun yarns and hand-woven fabrics produced from these yarns. For this purpose, OE-rotor yarns are produced at different proportion levels from virgin cotton and recycled fibers derived from knitted garment wastes at 25%, 50%, and 75%, respectively. For a better assessment, properties of OE-rotor yarns that contain recycled fibe
APA, Harvard, Vancouver, ISO, and other styles

Dissertations / Theses on the topic "Rotor spun yarn properties"

1

Shao, Xin. "Theoretical modeling of the tensile behavior of staple yarn." Diss., Georgia Institute of Technology, 2002. http://hdl.handle.net/1853/8273.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Van, Der Merwe J. P. "The effect of fibre physical properties on woollen spun yarn and plain knitted fabric properties." Thesis, Open University, 1985. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.354894.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Chasmawala, Rasesh Jayantilal. "Studies on the effect of spinning parameters on the structure and properties of air jet spun yarns." Thesis, Georgia Institute of Technology, 1987. http://hdl.handle.net/1853/8481.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Baqui, M. Abdul. "A study of the properties and the structure of long-staple air-jet wrap-spun yarn." Thesis, University of Manchester, 1989. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.329493.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Nero, Stina, and Maria Ydrefors. "Från fiber till textilgarnspinningens påverkan på mekaniska egenskaper : En studie om tillverkningsprocesser ur ett återvinningsperspektiv." Thesis, Högskolan i Borås, Akademin för textil, teknik och ekonomi, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:hb:diva-14759.

Full text
Abstract:
År 2016 var världsproduktionen av textilfibrer mer än 100 miljoner ton. Mycket av textilierna hamnar till slut i hushållssoporna som i Sverige förbränns till energiåtervinning; textilier som egentligen hade kunnat återanvändas eller materialåtervinnas. Textilåtervinning delas vanligtvis upp i tre olika kategorier: mekanisk, kemisk och termisk återvinning. Mekanisk återvinning är en typ av down cycling, som idag endast sker i liten skala. Ett av problemen som gör att mekanisk återvinning inte tillämpas i större utsträckning är att fibrerna i processen deformeras och blir för korta för att kunna
APA, Harvard, Vancouver, ISO, and other styles
6

CHEN, JUN-HONG, and 陳俊宏. "A study on the spinnability of cover-spun yarn by the O.E. rotor spinning frame." Thesis, 1988. http://ndltd.ncl.edu.tw/handle/09514010087771190426.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

田清沛. "A study of analysis based on quality specificity about cotton and Rotor Spun yarn using intelligent control." Thesis, 1999. http://ndltd.ncl.edu.tw/handle/67992429216199918034.

Full text
Abstract:
碩士<br>國立臺灣科技大學<br>纖維及高分子工程研究所<br>87<br>In this paper, the quality specificity about the cotton and the Open-End (OE) Rotor Spun yarn is studied. First, the Taguchi method is applied for experiment design to find the fittest cotton collocation. Second, the cotton specificity is measured by using High Volume Instrument system and the suitable orthogonal array is applied to design the experimental plan. Then, the Rieter OE Rotor Spinning Machine M 1/1 is used for spinning the OE Rotor yarn. Finally, the Uster Tester-3 is employed to measure the specificity of yarn. For quality consider
APA, Harvard, Vancouver, ISO, and other styles
8

Liu, Hsing-Hsueh, and 劉幸雪. "Process of Complex Core Spun Yarn Containing a Metal Filament and the Electrical Properties of its Knitted Fabics." Thesis, 2003. http://ndltd.ncl.edu.tw/handle/w2pp7h.

Full text
Abstract:
碩士<br>逢甲大學<br>紡織工程所<br>91<br>In order to improve comfort and anti-electrostatics of textiles, the complex core spun yarn was spun with metal filaments by ring frame. In this study, we used the copper and stainless steel filaments as core materials, and the rayon and T/R (polyester/rayon) roving as cover materials. In our spinning process, the metal filament fed from the front rollers was combined with the drafting roving strand to spin the complex core spun yarn. We designed the guide device installed at the weighting arm to increase stability of the metal filament. Besides, we also change
APA, Harvard, Vancouver, ISO, and other styles
9

Chen, Chien-Hsin, and 陳建興. "A Study of Effect of Knitted Fabrics from Spun Yarn with Different Denier of Polyester Fiber On the Handle and Dyeing Properties." Thesis, 1993. http://ndltd.ncl.edu.tw/handle/69995534450717799712.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Rotor spun yarn properties"

1

Hayam, N. H. A., M. R. Ahmad, W. Y. W. Ahmad, M. F. Yahya, and M. I. A. Kadir. "Tensile Strength and Evenness of Kenaf/Polyester Blended Rotor-Spun Yarn." In Proceedings of the International Colloquium in Textile Engineering, Fashion, Apparel and Design 2014 (ICTEFAD 2014). Springer Singapore, 2014. http://dx.doi.org/10.1007/978-981-287-011-7_7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Jhanji, Yamini, Deepti Gupta, and V. K. Kothari. "Moisture Management Properties of Ring Vis-à-vis Rotor Yarn Plated Knit Structures." In Functional Textiles and Clothing 2020. Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-9376-5_4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Oxtoby, Eric. "YARN PROPERTIES." In Spun Yarn Technology. Elsevier, 1987. http://dx.doi.org/10.1016/b978-0-408-01464-9.50024-4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

"Yarn Formation Structure and Properties." In Fundamentals of Spun Yarn Technology. CRC Press, 2003. http://dx.doi.org/10.1201/9780203009581.ch6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

"Yarn Formation Structure and Properties." In Fundamentals of Spun Yarn Technology. CRC Press, 2003. http://dx.doi.org/10.1201/9780203009581-14.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Rotor spun yarn properties"

1

Yang, Jianhui, Huan Zhang, and Changlin Qian. "Influence of Yarn Twist on the Quality of Rotor Spun Viscose Yarn." In 2017 3rd International Forum on Energy, Environment Science and Materials (IFEESM 2017). Atlantis Press, 2018. http://dx.doi.org/10.2991/ifeesm-17.2018.149.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Hayashi, Yasuhiko, Toru Iijima, Daisuke Suzuki, Hiroshi Kinoshita, Hisayoshi Oshima, and Tomoharu Tokunaga. "Improved properties of Carbon nanotube yarn spun from dense and long carbon nanotube forest." In 2015 International Conference on Manipulation, Manufacturing and Measurement on the Nanoscale (3M-NANO). IEEE, 2015. http://dx.doi.org/10.1109/3m-nano.2015.7425488.

Full text
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography