Relevant bibliographies by topics / Round-robin Characterization

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Book chapters
  4. Conference papers
  5. Reports

Academic literature on the topic 'Round-robin Characterization'

Author: Grafiati
Published: 28 May 2022
Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Round-robin Characterization.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Round-robin Characterization"

1

Ziolkowski, Pawel, Przemyslaw Blaschkewitz, Byungki Ryu, SuDong Park, and Eckhard Müller. "International Round Robin Test of Thermoelectric Generator Modules." Materials 15, no. 5 (2022): 1627. http://dx.doi.org/10.3390/ma15051627.

Full text
Abstract:
The status of metrology for the characterization of thermoelectric generator modules (TEM) is investigated in this work by an international round robin (RR) test including twelve laboratories from nine countries on three continents. Measurements have been performed with three samples of a Bi2Te3-based commercial TEM type, which has prevailed over three competing types during previous tests on the short- and long-term stability. A comparison of temperature-dependent results is provided up to 200 °C hot side temperature for the maximum power output Pmax, the incident heat flow Q˙In (at maximum e
APA, Harvard, Vancouver, ISO, and other styles
2

Cruse, Allan B. "On linear programming duality and Landau’s characterization of tournament." Acta Universitatis Sapientiae, Informatica 6, no. 1 (2014): 21–32. http://dx.doi.org/10.2478/ausi-2014-0016.

Full text
Abstract:
Abstract H. G. Landau has characterized those integer-sequences S = (s1, s2, . . . , sn) which can arise as score-vectors in an ordinary round-robin tournament among n contestants [17]. If s1 ≤ s2 ≤ · · · ≤ sn, the relevant conditions are expressed simply by the inequalities:
APA, Harvard, Vancouver, ISO, and other styles
3

Rosiñski, S., G. Grigorescu, D. Lewiñska, et al. "Characterization of microcapsules: recommended methods based on round-robin testing." Journal of Microencapsulation 19, no. 5 (2002): 641–59. http://dx.doi.org/10.1080/02652040210142533.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Valluzzi, Maria Rosa, Daniel V. Oliveira, Angelo Caratelli, et al. "Round Robin Test for composite-to-brick shear bond characterization." Materials and Structures 45, no. 12 (2012): 1761–91. http://dx.doi.org/10.1617/s11527-012-9883-5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Sancho-Parramon, Jordi, Tatiana Amochkina, Steffen Wilbrandt, et al. "Optical Characterization of Al Island Films: A Round Robin Test." Coatings 13, no. 6 (2023): 1073. http://dx.doi.org/10.3390/coatings13061073.

Full text
Abstract:
The determination of the effective optical constants of metal island films is an essential step towards the practical incorporation of this kind of films in optical coatings. In this work, the optical properties of aluminium island films deposited by electron beam evaporation on quartz substrates are investigated using different approaches employed by three research groups. The effective optical constants of the island films are inferred from optical measurements (spectrophotometry and spectroscopic ellipsometry) using: (i) a parameter-free dispersion model, (ii) a multiple oscillator model ba
APA, Harvard, Vancouver, ISO, and other styles
6

Ruge, Juan Carlos, Fausto Molina-Gómez, María C. Olarte, et al. "Inter-Laboratory Testing Program for the Physical Characterization of Guamo Sand." Ingeniería e Investigación 44, no. 3 (2025): e113488. https://doi.org/10.15446/ing.investig.113488.

Full text
Abstract:
In soil testing, assessing physical properties is essential for accurately characterizing sands. However, testing results can vary depending on the experimental procedures used and their implementation. A round-robin exercise facilitates the simultaneous analysis of the reproducibility and replicability of the standard methods used to characterize the properties of a specific material. This paper presents the outcomes of the first inter-laboratory testing initiative (i.e., a round-robin exercise) aimed at assessing the results variability of the physical characterization of a sandy soil. Guamo
APA, Harvard, Vancouver, ISO, and other styles
7

Fabbri, L., and M. Oksanen. "Characterization of Plasma-Sprayed Coatings Using Nondestructive Evaluation Techniques: Round-Robin Test Results." Journal of Thermal Spray Technology 8, no. 2 (1999): 263–72. http://dx.doi.org/10.1361/105996399770350485.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Podzimek, Stepan. "Round Robin Test on the Molecular Characterization of Epoxy Resins by Liquid Chromatography." International Journal of Polymer Analysis and Characterization 9, no. 5-6 (2004): 305–16. http://dx.doi.org/10.1080/10236660490935718.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Johnson, B. C., P. Y. Barnes, T. R. O'Brian, et al. "Initial results of the bidirectional reflectance characterization round-robin in support of EOS." Metrologia 35, no. 4 (1998): 609–13. http://dx.doi.org/10.1088/0026-1394/35/4/66.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

LEE, Jakin, and Chan-Hoon Haan. "Round-robin tests of the different types of sensors for floor impact sounds and vibrations." Journal of the Acoustical Society of America 154, no. 4_supplement (2023): A129. http://dx.doi.org/10.1121/10.0023014.

Full text
Abstract:
Recently, floor impact noise monitoring system was introduced for residents to control making noises spontaneously using sound and vibration sensors. The present study aims to investigate the performance and characteristics of various current using sound and vibration sensors which can be eventually compatible with the floor impact noise monitoring system. For measurements of sound sensors, 7 sound microphones were used including 2 condenser types, 4 dynamic types, and 1 electro condenser type. Also, 6 vibration meters were used including 2 MEMS types, 2 Piezo types, and 2 spring types. Sound
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Round-robin Characterization"

1

Tolstoguzov, A., B. Ber, P. Chapon, and M. N. Drozdov. "Depth Profiling of Multilayer Mo/Si Nanostructures." Thesis, Sumy State University, 2013. http://essuir.sumdu.edu.ua/handle/123456789/35262.

Full text
Abstract:
A round-robin characterization is reported on the sputter depth profiling of [60(3.0 nm Mo/ 0.3 nm B4C/ 3.7 nm Si)] and [60  (3.5 nm Mo/ 3.5 nm Si)] stacks deposited on Si (111). Two different commercial secondary ion mass spectrometers with time-of-flight and magnetic-sector analyzers and a pulsed radio frequency glow discharge optical emission spectrometer were used. The pros and cons of each instrumental approach are discussed. When you are citing the document, use the following link http://essuir.sumdu.edu.ua/handle/123456789/35262
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Round-robin Characterization"

1

Llano-Torre, Aitor, and Pedro Serna. "Fibre Reinforced Concrete Characterization." In Round-Robin Test on Creep Behaviour in Cracked Sections of FRC: Experimental Program, Results and Database Analysis. Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-72736-9_3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Soenen, Hilde, Jeroen Besamusca, Lily D. Poulikakos, et al. "Differential Scanning Calorimetry Applied to Bitumen: Results of the RILEM NBM TG1 Round Robin Test." In Multi-Scale Modeling and Characterization of Infrastructure Materials. Springer Netherlands, 2013. http://dx.doi.org/10.1007/978-94-007-6878-9_23.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Ba_kowski, W., H. Soenen, D. Sybilski, M. Gajewski, and G. Gauthier. "Binder fatigue properties and the results of the Rilem Round Robin Test." In Advanced Testing and Characterization of Bituminous Materials. CRC Press, 2009. http://dx.doi.org/10.1201/9780203092989.ch118.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Park Duhee, Kim Jin-Man, Kim Dong-Soo, Sun Chang-Guk, and Kim Sung-Ryul. "Evaluation of dispersion of calculated seismic site responses through Round Robin Test in Korea." In Proceedings of the 17th International Conference on Soil Mechanics and Geotechnical Engineering. IOS Press, 2009. https://doi.org/10.3233/978-1-60750-031-5-2699.

Full text
Abstract:
One dimensional site response analysis is widely used in practice to estimate the seismic site amplification effects. The site response analysis involves determination of various uncertainties, which include characterization of future seismic event and dynamic soil properties. The accuracy and reliability of the site response analysis depend on how these factors are properly defined. A site response analysis round robin test has been performed in Korea to evaluate the dispersion of the calculated site responses caused by such uncertainties. To simulate the common practice, only the SPT, CPT da
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Round-robin Characterization"

1

Heifner, Steven C. "Deposit Loading Characterization to Enhance Boiler Chemical Cleaning Decisions." In CORROSION 2006. NACE International, 2006. https://doi.org/10.5006/c2006-06460.

Full text
Abstract:
Abstract There are currently three standard measuring techniques for characterizing deposit loadings within water side components of a power boiler. Two of these standard test methods are delineated in ASTM Standard D34831; the third method is delineated in NACE Standard TM0199-992. The mechanical and chemical solvent characterization methods were formulated in Japan, and adopted in the United States following the promotional efforts of Atwood and Hale3. ASTM D3438 was first codified in 1983, and was recently reaffirmed without alteration in 1999. During the 1990s, development of the glass bea
APA, Harvard, Vancouver, ISO, and other styles
2

Waters, S. A., H. Tsaprailis, W. Kovacs, J. R. Tuggle, and L. F. Garfias-Mesias. "Characterization of Internal and External Coatings Used on Steel Pipelines." In CORROSION 2010. NACE International, 2010. https://doi.org/10.5006/c2010-10038.

Full text
Abstract:
Abstract Accelerated Corrosion Testing (ACT) of external pipeline coatings traditionally has been associated with the ASTM(1) B117 Salt Fog Test1 (which is also similar to other standards like the BS39002 Parts F4 and F12 and the ISO standard 72533). There are other types of ACT for coatings that use “salt spray” type tests; for example, the acidified salt spray (ASS) and copper acidified salt spray (CASS) tests, which use test solutions containing acetic acid and copper chloride with acetic acid. Recently, ACT of coatings has been performed using corrosive gases in a closed environment at con
APA, Harvard, Vancouver, ISO, and other styles
3

Ristau, Detlev, Uwe Willamowski, Herbert Welling, Wilfried Plass, and Adolf Giesen. "Evaluation of a round-robin test on optical absorption at 10.6 um." In Third International Workshop on Laser Beam and Optics Characterization, edited by Michel Morin and Adolf Giesen. SPIE, 1996. http://dx.doi.org/10.1117/12.259936.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Ukraintsev, Vladimir A., R. Scott List, Mi-Chang Chang, et al. "Dopant characterization round-robin study performed on two-dimensional test structures fabricated at Texas Instruments." In CHARACTERIZATION AND METROLOGY FOR ULSI TECHNOLOGY. ASCE, 1998. http://dx.doi.org/10.1063/1.56919.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Mawlod, Arwa, Afzal Memon, and John Nighswander. "Accuracy and Precision of Reservoir Fluid Characterization Tests Through Blind Round-Robin Testing." In Abu Dhabi International Petroleum Exhibition & Conference. SPE, 2021. http://dx.doi.org/10.2118/207749-ms.

Full text
Abstract:
Abstract Objectives/Scope: Oil and gas operators use a variety of reservoir engineering workflows in addition to the reservoir, production, and surface facility simulation tools to quantify reserves and complete field development planning activities. Reservoir fluid property data and models are fundamental input to all these workflows. Thus, it is important to understand the propagation of uncertainty in these various workflows arising from laboratory fluid property measured data and corresponding model uncertainty. The first step in understanding the impact of laboratory data uncertainty was
APA, Harvard, Vancouver, ISO, and other styles
6

Welschen, Romy, Ferenc Gillemot, Igor Simonovski, et al. "Round Robin Analysis of Small Punch Testing on 15Kh2NMFA Reference Material." In ASME 2022 Pressure Vessels & Piping Conference. American Society of Mechanical Engineers, 2022. http://dx.doi.org/10.1115/pvp2022-83811.

Full text
Abstract:
Abstract Miniature / sub-sized specimen test methods for the mechanical characterization of metallic alloys like the small punch test (SPT) have the benefit that only small quantities of material are needed to perform a reasonable number of tests. This makes such tests in particular interesting if only limited quantities of material are available for mechanical characterization, like irradiated specimens from reactor pressure vessel (RPV) surveillance programs of light water reactors (LWRs). The SPT only requires small discs of 8mm diameter and 0.5mm thickness and such specimens can be manufac
APA, Harvard, Vancouver, ISO, and other styles
7

Wang, Chengqing, Ronald L. Jones, Eric K. Lin, et al. "Line edge roughness characterization of sub-50nm structures using CD-SAXS: round-robin benchmark results." In Advanced Lithography, edited by Chas N. Archie. SPIE, 2007. http://dx.doi.org/10.1117/12.725380.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Frank, Samson, Lukas Schwörer, Victor Alvan, et al. "Round-robin test of subsurface damage characterization in ZERODUR using non-destructive optical coherence tomography." In Eleventh European Seminar on Precision Optics Manufacturing, edited by Helge Thieß, Gerald Fütterer, Christine Wünsche, Oliver W. Fähnle, and Alexander Haberl. SPIE, 2024. http://dx.doi.org/10.1117/12.3031491.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Pei, P., J. Kelly, S. Malghan, and S. Dapkunas. "Analysis of Zirconia Powder for Thermal Spray: Reference Material for Particle Size Distribution Measurement." In ITSC 1996, edited by C. C. Berndt. ASM International, 1996. http://dx.doi.org/10.31399/asm.cp.itsc1996p0263.

Full text
Abstract:
Abstract The thermal spray industry identified the need for repeatable and reproducible feedstock powder characterization methods, especially particle size distribution (PSD), for cost effective manufacturing of thermal barrier coatings. The PSD measurement by a laser light scattering method was identified as the technique most widely used in the industry. This technique offers high resolution, rapid measurements and ease of use. A round robin study by nine laboratories using different models of a commercial light scattering instrument has been completed as the first step towards the developme
APA, Harvard, Vancouver, ISO, and other styles
10

Rathbun, Howard J., Lee F. Fredette, Paul M. Scott, Aladar A. Csontos, and David L. Rudland. "NRC Welding Residual Stress Validation Program International Round Robin Program and Findings." In ASME 2011 Pressure Vessels and Piping Conference. ASMEDC, 2011. http://dx.doi.org/10.1115/pvp2011-57642.

Full text
Abstract:
The U.S. Nuclear Regulatory Commission (NRC) and the Electric Power Research Institute (EPRI) are working cooperatively under a memorandum of understanding to validate welding residual stress (WRS) predictions in pressurized water reactor (PWR) primary cooling loop components containing dissimilar metal (DM) welds. These stresses are of interest as DM welds in PWRs are susceptible to primary water stress corrosion cracking (PWSCC) and tensile weld residual stresses are the primary driver of this degradation mechanism. The NRC/EPRI weld residual stress (WRS) analysis validation program consists
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Round-robin Characterization"

1

Fox, Kevin. CHARACTERIZATION OF HANFORD HIGH LEVEL WASTE GLASS ROUND ROBIN SAMPLES. Office of Scientific and Technical Information (OSTI), 2019. http://dx.doi.org/10.2172/1571414.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Apian-Bennewitz, Peter, Jan de Boer, Bruno Bueno, et al. Analysis and evaluation of BSDF characterization of daylighting systems. Edited by David Geisler-Moroder. IEA SHC Task 61, 2021. http://dx.doi.org/10.18777/ieashc-task61-2021-0012.

Full text
Abstract:
This technical report summarizes the current state of the art in the field of characterization of daylighting and shading systems by bidirectional scattering distribution functions (BSDFs) and documents the results of an inter-laboratory round robin test. It is the result of collaborative work conducted by members of the IEA SHC Task 61 / EBC Annex 77, Subtask C2.
APA, Harvard, Vancouver, ISO, and other styles
3

Piepel, G. F., T. E. Jones, D. L. Eggett, and G. B. Mellinger. Product consistency test round robin conducted by the Materials Characterization Center - Summary Report. Office of Scientific and Technical Information (OSTI), 1989. http://dx.doi.org/10.2172/5566697.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Riccardella, Scott, and Jason Van Velsor. PR-335-15370-R01 Evaluation of NDE Methodologies for In-Ditch Characterization of ERW Seam Anomalies. Pipeline Research Council International, Inc. (PRCI), 2019. http://dx.doi.org/10.55274/r0011596.

Full text
Abstract:
This work further evaluate and accurately assess the current state (as of 2016) of NDE methodologies for characterizing ERW seam defects. The IM-3C project was conducted as part of a larger program that also incorporated an evaluation of in-line inspection (ILI) technology performance (IM-3-1). The work primarily consisted of a round-robin type study, where service and technology providers were asked to conduct NDE on several blind samples that were known to have ERW seam defects. Following completion of the NDE, the blind samples were destructively tested and the ERW seam defects were charact
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Round-robin Characterization' for particular source types:
Journal articles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography