Relevant bibliographies by topics / Rozměrová a tvarová přesnost

Contents

  1. Dissertations / Theses

Academic literature on the topic 'Rozměrová a tvarová přesnost'

Author: Grafiati
Published: 4 June 2021
Last updated: 1 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Rozměrová a tvarová přesnost.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Dissertations / Theses on the topic "Rozměrová a tvarová přesnost"

1

Vlček, Hynek. "Vodní paprsek s 3D hlavou." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2015. http://www.nusl.cz/ntk/nusl-231986.

Full text
Abstract:
The diploma thesis is focused on waterjet technology, dimensional and shape accuracy of manufactured parts. In the theoretical section, the principle of technlogy and its use in engineering industry at the present time, are described. Moreover, the theoretical section includes discription of every single parts of the machine of waterjet cutting, that are nowadays used. The biggest part of diploma thesis focuses on 3D cutting technology and on attachments for elimination of undercutting. Practical section focuses on dimensional and shape accuracy of manufactured parts manufactured by waterjet technology that makes use of 3D head and different cutting speed. The practical section also includes operating and maintenance cost of the machine. In terms of maintenance, real service life of components is compared there with a lifespan declarated by machine producer.
APA, Harvard, Vancouver, ISO, and other styles
2

Ivánek, Radim. "Rozměrová, tvarová a materiálová analýza bimetalových dílců s definovaným poloměrem ohybu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2020. http://www.nusl.cz/ntk/nusl-417100.

Full text
Abstract:
The thesis aim is an evaluation of achieved results coming from the analysis of pipe bend 180° for the critical bending / bend 1D and supercritical bending / bend 0,7D. The theoretical part is focused on material property of a bimetallic pipe and on methods applied to work out the analysis. The definition of critical points at a considered segment and possible defects arisen while bending is embodied in the thesis. The practical part of the thesis is based on presenting dimensional and proportional analysis based on using optical microscopes and 3D scanner GOM ATOS. The material analysis was aimed at macrostructure as well as microstructure of the bimetallic pipe material, at chemical composition and at the hardness when low-loaded. The analysis achieved results are assessed at the end of the thesis.
APA, Harvard, Vancouver, ISO, and other styles
3

Kučera, Tomáš. "Rozměrová přesnost odlitků ze slitin Al vyráběných metodou vytavitelného modelu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2008. http://www.nusl.cz/ntk/nusl-228154.

Full text
Abstract:
The aim of my diploma thesis was to find the possibilities of reaching the dimensional tolerance in the individual phases of casting by the investment casting process. The accuracy of the selected wax patterns and castings were measured by a caliper. At first the selected dimensions of the wax models were measured right after taking them out of the mold and then they were measured during seven days. The castings were measured after pouring. The obtained figures were statistically evaluated. The results show that the large-scale and thick-wall wax model should be coated after seven days of stabilization because the dimensions of the wax model are not stable.
APA, Harvard, Vancouver, ISO, and other styles
4

Horák, Ondřej. "Analýza rozměrové přesnosti a mechanických vlastností plastových komponentů zhotovených 3D tiskem." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2020. http://www.nusl.cz/ntk/nusl-417453.

Full text
Abstract:
The Master's thesis deals with the determination of mechanical properties of materials used for 3D printing by ALPS ELECTRIC CZECH, s.r.o. (PETG, PLA, ABS, PLA ESD), extended of new materials (ASA, PC / ABS). The prepared test samples, produced by 3D printing technology Fused Deposition Modeling, were analyzed using mechanical tests (tensile test and two hardness tests), surface roughness and dimensional accuracy. Statistical evaluation was performed for individual materials of selected parameters (tensile strength, modulus of elasticity in tension, elongation, Shore hardness, hardness of ball indentation). The conclusion of the thesis is devoted to the comparison of materials by selected parameters and production costs. The additive material PLA Filament Plasty Mladeč proved to be the best with its properties and the second lowest price.
APA, Harvard, Vancouver, ISO, and other styles
5

Jaroš, Jan. "Vývoj skenovací strategie laseru pro výrobu mikro-prutové struktury technologií SLM." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2020. http://www.nusl.cz/ntk/nusl-417510.

Full text
Abstract:
Additive technology (AT) is increasingly used to design unique parts, mainly due to the ability to produce complex structures such as lattice structures. However, this also includes the need to modify the process parameters or the production strategy of the AT, which is usually set to produce volume geometry. Using samples corresponding to the geometries of the lattice structures, the exact input values were measured, which were used to design the SLM (Selective laser melting) production process using a contour strategy. Thanks to this, vertical and angled (35.26°) struts with low porosity (up to 0.2 %), low surface roughness and high dimensional accuracy were produced. Porosity was measured on µCT, surface roughness and dimensional accuracy were measured on STL data. The results show that if the parameters of the SLM process are set correctly, it is possible to produce struts with low porosity and surface roughness using different combinations of laser power and scanning speed. The above findings were used in the creation of script that allow the selection of suitable process parameters to produce lattice structures.
APA, Harvard, Vancouver, ISO, and other styles
6

Sedlák, Ondřej. "Technologie řezání plazmovým paprskem." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2011. http://www.nusl.cz/ntk/nusl-229738.

Full text
Abstract:
This diploma thesis focuses on the unconventional method of metal separation, namely on the cutting technology based on the plasma arc. The introductory part deals with studies which focus on the given issue from a theoretical point of view. The core of the work rests in the practical part which is dedicated to the production of samples using a plasma burning machine called Hypertherm HPR 260. The burned samples are monitored and assessed for the surface quality and dimensional accuracy for every created part. The final part of the work is dedicated to the techno-economic assessment of the burned parts. In the end, the evaluation of the attained results is made.
APA, Harvard, Vancouver, ISO, and other styles
7

Vrána, Radek. "Návrh porézních struktur pro aditivní výrobu technologií selective laser melting." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2014. http://www.nusl.cz/ntk/nusl-231472.

Full text
Abstract:
Metal additive technology allows to create objects with complex shape that are very difficult to produce by conventional technologies. An example of such component is a porous structure which is composed of periodical truss cells. This diploma thesis deals with the prediction of the mechanical properties of very small lattice structures made of additive manufacturing technology Selective Laser Melting. Using the proposed test specimens it was found that real dimensions of the trusses varies with size and orientation to the base platform. It was proposed and tested samples for rod tensile test made of SLM. Based on the real information about dimensions and mechanical properties of rods were predicted mechanical properties of lattice structures. A lot of mechanical tests were carried out to obtain the real mechanical properties. Test results and conclusions are described in the thesis.
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography