Relevant bibliographies by topics / RTG diffraction

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Book chapters
  4. Conference papers
  5. Reports

Academic literature on the topic 'RTG diffraction'

Author: Grafiati
Published: 28 June 2021
Last updated: 29 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'RTG diffraction.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "RTG diffraction"

1

Camara, A. H. "Faktorová analýza v Mössbauerovì spektroskopii a RTG difrakèní fázové analýze / Factor analysis in Mössbauer spectroscopy and X-ray diffraction analysis." Koroze a ochrana materialu 58, no. 3 (2014): 88–94. http://dx.doi.org/10.2478/kom-2014-0010.

Full text
Abstract:
Ze souboru vzorků obsahujících železo byly metodami Mössbauerovy spektroskopie a rtg difrakční analýzy získána data, na která byla aplikována faktorová analýza, díky níž bylo zjištěno, kolika faktory lze vysvětlit celkový rozptyl dat. Došlo tedy k vyčíslením faktorového skóre, k redukci počtu proměnných a vzniku faktorů, kterými byly nahrazeny původní proměnné. U Mössbauerovy spektroskopie se jedná o šest faktorů, kterým bylo přiřazeno šest původních proměnných a u rtg difrakční analýzy byly zjištěny tři faktory, kterým byly přiřazeny tři původní proměnné.
APA, Harvard, Vancouver, ISO, and other styles
2

Hutyrová, Zuzana, Włodzimierz Makiela, Peter Michalik, et al. "Creation of Mathematical Prescription of Residual Stress Depending on Various Cutting Conditions." Key Engineering Materials 669 (October 2015): 126–33. http://dx.doi.org/10.4028/www.scientific.net/kem.669.126.

Full text
Abstract:
Article deals with problematic of internal residual stress after machining depends on various cutting condition. In article is presented influenced of cutting conditions to quality of internal layers by defining values of residual stresses. Method use to evaluate values of residual stress was RTG diffraction. Material used for experiment was steel C45 and type of machining was up milling for various parameters such as spindle speed, feed rate and depth of cut.
APA, Harvard, Vancouver, ISO, and other styles
3

Wenk, H. R. "Neutron Diffraction Texture Analysis." Reviews in Mineralogy and Geochemistry 63, no. 1 (2006): 399–426. http://dx.doi.org/10.2138/rmg.2006.63.15.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Harrison, R. J. "Neutron Diffraction of Magnetic Materials." Reviews in Mineralogy and Geochemistry 63, no. 1 (2006): 113–43. http://dx.doi.org/10.2138/rmg.2006.63.6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Fei, Y., and Y. Wang. "High-Pressure and High-Temperature Powder Diffraction." Reviews in Mineralogy and Geochemistry 41, no. 1 (2000): 521–57. http://dx.doi.org/10.2138/rmg.2000.41.15.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Ross, N. L., and C. Hoffmann. "Single-crystal Neutron Diffraction: Present and Future Applications." Reviews in Mineralogy and Geochemistry 63, no. 1 (2006): 59–80. http://dx.doi.org/10.2138/rmg.2006.63.3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Knorr, K., and W. Depmeier. "Application of Neutron Powder-Diffraction to Mineral Structures." Reviews in Mineralogy and Geochemistry 63, no. 1 (2006): 99–111. http://dx.doi.org/10.2138/rmg.2006.63.5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Meier, R., J. Anderson, and S. Verryn. "Industrial X-ray Diffraction Analysis of Building Materials." Reviews in Mineralogy and Geochemistry 74, no. 1 (2012): 147–65. http://dx.doi.org/10.2138/rmg.2012.74.4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Hill, Adrian H. "A new gas system for automatedin situpowder diffraction studies at the European Synchrotron Radiation Facility." Journal of Applied Crystallography 46, no. 2 (2013): 570–72. http://dx.doi.org/10.1107/s0021889813000629.

Full text
Abstract:
A new gas dosing rig built for the high-resolution powder diffraction beamline (ID31) at the ESRF is described. The rig is fully controlled and monitored by the beamline control software, enabling automated absorption and desorption of fixed pressures of gases up to 100 bar (107 Pa) forin situstructural studies. The rig has successfully been used on ID31 as well as other beamlines at the ESRF.
APA, Harvard, Vancouver, ISO, and other styles
10

Lavina, B., P. Dera, and R. T. Downs. "Modern X-ray Diffraction Methods in Mineralogy and Geosciences." Reviews in Mineralogy and Geochemistry 78, no. 1 (2014): 1–31. http://dx.doi.org/10.2138/rmg.2014.78.1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "RTG diffraction"

1

Klvač, Ondřej. "Návrh a testování přípravku pro post-mortem XRD měření elektrod li-ion baterií v inertní atmosféře." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2020. http://www.nusl.cz/ntk/nusl-413242.

Full text
Abstract:
The work describes the design and manufacturing of a test device for post-mortem measurements of electrodes of electrochemical cells using X-ray diffraction spectroscopy. The theoretical part describes the diffractometer Rigaku Miniflex 600, for which the product is intended. At the same time, an overview of solutions in various applications is processed here in the form of a recherche. The practical part documents the current development of a new cell, on which tests were performed. Here is an overview of the influence of gases and insulating materials on the resulting data, especially distor
APA, Harvard, Vancouver, ISO, and other styles
2

Fiala, Jiří. "Studium chování betonů při působení vysokých teplot." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2015. http://www.nusl.cz/ntk/nusl-227178.

Full text
Abstract:
This thesis deals with the behavior of cement concrete at high temperature with a focus on the impact behavior of aggregate, cement type and polypropylene fiber reinforcement. The theoretical part describes the issue of cement concrete at high temperatures, especially processes in the cement matrix, aggregates and polypropylene fibers. Furthermore, theoretical part describes the selection of a suitable type of cement and aggregates in concrete exposed to high temperatures. In the experimental part was designed the concrete composition with various kinds different types of aggregates and two ty
APA, Harvard, Vancouver, ISO, and other styles
3

Beránková, Karla. "Důsledky tvorby anortitu v keramickém střepu." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2012. http://www.nusl.cz/ntk/nusl-225515.

Full text
Abstract:
Anorthite is crystalline phase in the ceramic body. Is acquired on burning a mixture of calcium ceramic raw material. This work deals with the influence on the resulting properties of anorthite ceramic body, especially flexural strength, porosity, shrinkage, thermal expansion coefficient. And the influence of different CaO sources on the properties. As a source of CaO was used calcium carbonate, calcium hydroxide and fluid fly ash.
APA, Harvard, Vancouver, ISO, and other styles
4

Simancas, Coloma Jorge. "Synthesis and Characterization of Zeolitic Materials Using Phosphorous Organic Structure Directing Agents." Doctoral thesis, Universitat Politècnica de València, 2021. http://hdl.handle.net/10251/171267.

Full text
Abstract:
[ES] Las zeolitas son materiales cristalinos microporosos con canales y tamaños de poro de dimensiones moleculares. La estructura y composición de las zeolitas les confiere interesantes propiedades que permiten su aplicación en una amplia gama de aplicaciones industriales como adsorción, separación o catálisis. La síntesis de zeolitas es la etapa más importante para el control de la estructura y composición de las zeolitas y, por tanto, crítica para la optimización de sus propiedades. Esta tesis se ha centrado en la síntesis de zeolitas utilizando compuestos que contienen fósforo (cationes fo
APA, Harvard, Vancouver, ISO, and other styles
5

Valeš, Václav. "Vysokoteplotní RTG difraktometrie tenkých vrstev." Doctoral thesis, 2015. http://www.nusl.cz/ntk/nusl-334635.

Full text
Abstract:
In this work, the crystallographic structure and its changes under thermal treatment of different systems consisting of metal oxide nanoparticles is studied. The principal method used throughout the thesis is x-ray powder diffraction enriched with grazing incidence small angle x-ray scattering when the nanoparticles form an ordered structure or with x-ray absorption spectroscopy when additional information on local crystallographic structure is required. For all the systems the preparation conditions were optimized according to the crystallographic data for further applications.
APA, Harvard, Vancouver, ISO, and other styles
6

Cejpek, Petr. "Rtg difrakce a difuzní rozpyl na Heuslerových slitinách." Master's thesis, 2015. http://www.nusl.cz/ntk/nusl-331756.

Full text
Abstract:
Recently, Heusler alloys are studied for their interesting magnetic and electronic properties. These properties are strongly dependent on the crystallographic struc- ture. This work deals with Heusler alloys of the A2BC type. We have powder samples and single-crystaline samples for our study as well. An object of interest was a description of crystallographic structure of the samples, site occupation numbers of each type of atoms and their possible occupation disorder. Pow- der difraction and EXAFS have been measured on the powder samples. Clasical single-crystal diffractions has been meassure
APA, Harvard, Vancouver, ISO, and other styles
7

Horák, Lukáš. "Studium struktury feromagnetických polovodičů metodami rtg rozptylu." Doctoral thesis, 2014. http://www.nusl.cz/ntk/nusl-326228.

Full text
Abstract:
We studied epitaxial layers of Gallium Manganese Arsenide by various x-ray scattering methods. Since the positions of the Mn dopant in the a host GaAs lattice are crucial for magnetic properties of this material, we focused mainly on a development of the laboratory diffraction method capable to identify Mn in particular crystallographic positions. From the measured diffracted intensity distributed along Crystal Truncation Rods, it is possible deduce the density of Mn interstitials in two non-equivalent crystallographic positions. It is possible to decrease the interstitial Mn density by anneal
APA, Harvard, Vancouver, ISO, and other styles
8

Machovec, Petr. "Mikrostruktura a vlastnosti tenkých vrstev multiferroických komplexních oxidů připravených pomocí metody pulzní laserové depozice." Master's thesis, 2021. http://www.nusl.cz/ntk/nusl-448252.

Full text
Abstract:
Title: Microstructure and properties of multiferroic complex oxide thin films prepared by pulsed laser deposition method Author: Petr Machovec Department: Department of Condensed Matter Physics Supervisor: RNDr. Milan Dopita, Ph.D., Department of Condensed Matter Physics Abstract: In the frame of this thesis, structure, microstructure, and real structure of multiferroic epitaxial layers of LuFeO3 were studied by means of X-ray reflectivity and X-ray diffraction. In theoretical part the theory of X-ray scattering on crystalline layers is described. Standard description of X-ray reflectivity on
APA, Harvard, Vancouver, ISO, and other styles
9

Dulanská, Lucia. "Optimalizace modelu kožní bariéry s obsahem ceramidů izolovaných z lidského stratum corneum." Master's thesis, 2021. http://www.nusl.cz/ntk/nusl-446434.

Full text
Abstract:
Charles University, Faculty of Pharmacy in Hradec Králové Department of Biophysics and Physical Chemistry Author: Lucia Dulanská Supervisor: Mgr. Petra Pullmannová, Ph.D Title of thesis: Optimization of the skin barrier model with isolated ceramides of human Stratum corneum Stratum corneum (SC), the uppermost layer of the skin, regulates transcutaneous water loss and protects against outer conditions and harmful substances. It consists of cornified cells - corneocytes and extracellular lipid matrix, which is responsible for the barrier functions. Corneocytes are covered with covalently bound l
APA, Harvard, Vancouver, ISO, and other styles
10

Soroka, Miroslav. "Struktura a termoelektrické vlastnosti vrstevnatých kobaltátů." Master's thesis, 2016. http://www.nusl.cz/ntk/nusl-344050.

Full text
Abstract:
The synthesis of NaxCoO2 by Pechini method (with initial sodium stoichiometry x = 1.0, 0.9, 0.8, and 0.7) was studied for the samples heat-treated in the temperature range from 550 řC to 750 řC. The structure characterization and phase composition was carried out by the powder X-ray diffraction (XRD) analysis. The elementary analysis was done using atomic absorption spectroscopy. From the thermoelectric properties, the Seebeck coefficient was measured for both α- and γ- phase. The Weiss constant was determined for α- and γ- phase by linear regression of 1/χ. The real sodium content in sodium c
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "RTG diffraction"

1

Pérez Méndez, Mercedes, José Fayos Alcañiz, and Marc Meunier. "Molecular Simulation of Cholesteric Liquid-Crystal Polyesteramides: Conformational and Structure Analysis by Rietveld Refinement." In Liquid Crystals [Working Title]. IntechOpen, 2022. http://dx.doi.org/10.5772/intechopen.100388.

Full text
Abstract:
Molecular modeling techniques are applied to polyesteramides designed as PNOBDME (C34H38N2O6)n and PNOBEE (C26H22N2O6)n, synthesized and characterized as cholesteric liquid crystals -through the condensation reaction between 4 and 4′-(terephthaloyl- diaminedibenzoic chloride (NOBC) and racemic glycol: DL-1,2 dodecanediol, or DL-1,2-butanediol, respectively, being chemical modifications of precursor multifunctional cholesteric LC polyesters, adding new properties but holding their helical macromolecular structures. Although the starting raw materials were racemic, these cholesteric LC polymers
APA, Harvard, Vancouver, ISO, and other styles
2

Akisheva, Alina, and Iryna Valivodz. "DOCKING ANALYSIS OF THE INTERACTION OF PROPOXAZEPAM WITH BIOTARGETS THAT REGULATE ITS MECHANISM OF ACTION AND PHARMACOLOGICAL ACTIVITY." In Science, technology and innovation in the modern world. Publishing House “Baltija Publishing”, 2023. http://dx.doi.org/10.30525/978-9934-26-364-4-7.

Full text
Abstract:
One of 1.4-benzodiazepine 3-alcoxy derivatives – propoxazepam, possessing high analgetic action, also effectively suppresses experimental seizures of different etiology. Unexpected combination of pharmacological spectrum components suggests its different binding sites of GABAA receptor subunits.The aim of the work was docking analysis of the interaction of Propoxazepam with biotargets that mediate its mechanism of action and pharmacological activity (using experimental data of the propoxazepam conformation and calculated data for the three-dimensional structure of the ligand-binding site and s
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "RTG diffraction"

1

Klapper, Helmuth Sarmiento, Tatiana Hentrich, Hendrik John, and Joachim Roesler. "Fatigue Behavior under Multiaxial Loading and Simulated Geothermal Environment of Cr-Mn Stainless Steel and UNS N07718." In CORROSION 2016. NACE International, 2016. https://doi.org/10.5006/c2016-07901.

Full text
Abstract:
Abstract The fatigue life and reliability of components for modern drilling technologies are restricted by severe environmental conditions. The mechanical strain caused by drilling through hard formations in combination with increasing temperatures due to large drilling depths typical for geothermal wells, and in corrosive media, are particular critical for metallic materials. Therefore, for testing materials a suitable test rig, which enables to mimic the simultaneous influence of multiaxial fatigue loading, elevated temperatures and corrosive environments, is necessary. Because of the comple
APA, Harvard, Vancouver, ISO, and other styles
2

Cunha, P. E. M., and L. A. C. Palermo. "A fast "multi source" reverse time migration (RTM)." In Proceedings of the International Seminar Days on Diffraction, 2004. IEEE, 2004. http://dx.doi.org/10.1109/dd.2004.186013.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Chen, Yu-Bin. "SYNCHRONOUS SCATTERING AND DIFFRACTION FROM GOLD NANOTEXTURED SURFACES WITH SLIGHT PERIODICITY." In International Heat Transfer Conference 16. Begellhouse, 2018. http://dx.doi.org/10.1615/ihtc16.rti.020528.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Park, Y.-J., W.-Y. Kim, and Y.-B. Kang. "Phase equilibria of Al2TiO5–Ti3O5 pseudobrookite solid solution in the Al2O3–TiOx system under various oxygen partial pressures." In 12th International Conference of Molten Slags, Fluxes and Salts (MOLTEN 2024) Proceedings. Australasian Institute of Mining and Metallurgy (AusIMM), 2024. http://dx.doi.org/10.62053/mcam4452.

Full text
Abstract:
The phase equilibria in the Al2O3–TiOx system were investigated in wide ranges of temperature and oxygen partial pressure: 1300~1600°C and 10-16.6~10-8 atm, respectively. The equilibrium phases and their compositions were identified using X-ray diffraction (XRD) and electron probe micro-analysis (EPMA), respectively. Most noticeably, a wide range of pseudobrookite solid solution was found in equilibrium with almost pure alumina. At each temperature, the cationic ratio expressed as RTi = nTi/(nAl + nTi)) of the pseudobrookite solid solution showed a noteworthy dependency on the oxygen partial p
APA, Harvard, Vancouver, ISO, and other styles
5

Li, Alice K., Vincent McDonell, Max Venaas, Gregor A. Waldherr, and Hai Lin. "Design and Evaluation of a Fiber Optic Sensor for Particle and Concentration Monitoring in a Contaminated Flow Rig." In ASME Turbo Expo 2019: Turbomachinery Technical Conference and Exposition. American Society of Mechanical Engineers, 2019. http://dx.doi.org/10.1115/gt2019-91077.

Full text
Abstract:
Abstract Optimizing safety and efficiencies is vital to turbomachinery design in the aerospace industry. However, aircraft engines subject to ingestion of airborne particle mixtures of unknown size and concentration have undergone unpredictable malfunction and power losses. Premature damage could be caused by increased erosion rates from mixtures with abrasive material. Similarly, corrosion rates could also increase for mixtures with corrosive material. Further, ingestions with melting points below the combustion exit temperature do melt, adhere to turbine blades, and thereby produce clogs and
APA, Harvard, Vancouver, ISO, and other styles
6

Oliver, Sam, Chris Simpson, Andrew James, et al. "Measurements of Stress During Thermal Shock in Clad Reactor Pressure Vessel Material Using Time-Resolved In-Situ Synchrotron X-Ray Diffraction." In ASME 2018 Pressure Vessels and Piping Conference. American Society of Mechanical Engineers, 2018. http://dx.doi.org/10.1115/pvp2018-84676.

Full text
Abstract:
Nuclear reactor pressure vessels must be able to withstand thermal shock due to emergency cooling during a loss of coolant accident. Demonstrating structural integrity during thermal shock is difficult due to the complex interaction between thermal stress, residual stress, and stress caused by internal pressure. Finite element and analytic approaches exist to calculate the combined stress, but validation is limited. This study describes an experiment which aims to measure stress in a slice of clad reactor pressure vessel during thermal shock using time-resolved synchrotron X-ray diffraction. A
APA, Harvard, Vancouver, ISO, and other styles
7

Khalili, Pouya, Arild Saasen, Mahmoud Khalifeh, Bodil Aase, and Geir Olav Ånesbug. "Measuring and Analyzing the Magnetic Content of Drilling Fluid." In Abu Dhabi International Petroleum Exhibition & Conference. SPE, 2021. http://dx.doi.org/10.2118/207240-ms.

Full text
Abstract:
Abstract Magnetic contamination of drilling fluid can impact the accuracy of a directional survey by shielding the magnetic field. Additionally, this contamination, such as swarf or finer magnetic particles, can agglomerate on the downhole tool or BOP and cause tool failure in the worst-case scenario. Thus, it is necessary to measure the magnetic content of drilling fluid. However, there is no recommended practice in API or ISO for this purpose. A simple experimental setup and measurement system was developed that can be easily deployed in the rig site to measure the magnetic contamination of
APA, Harvard, Vancouver, ISO, and other styles
8

Crabos, F., P. Monge-Cadet, P. Lucchese, F. Blein, and E. Rigal. "Properties of a Thermal Barrier Coating Fabricated by R.F. Plasma Spraying." In ITSC 1996, edited by C. C. Berndt. ASM International, 1996. http://dx.doi.org/10.31399/asm.cp.itsc1996p0369.

Full text
Abstract:
Abstract A P.S.Z. coating elaborated by r.f. plasma spraying was studied and compared to industrial arc plasma-sprayed P.S.Z. coatings to evaluate the quality of the corresponding thermal barrier coating system for gas turbine applications. One commercial ZrO2 - 8% Y2O3 powder was sprayed with two industrial d.c. torches (7MB and F4) and one r.f. plasma torch (Tekna PL50). Physical properties such as density, porosity and thermal diffusivity were measured on the three types of P.S.Z. coating. The microstructure and quantitative phase analysis were respectively investigated by S.E.M. and X-Ray
APA, Harvard, Vancouver, ISO, and other styles
9

Matras-Postolek, Katarzyna, A. Zaba, S. Sovinska, and D. Bogdal. "Microwave-assisted preparation of ZnS and ZnSe nanocrystals with different morphologies for photodegradation process of organic dyes." In Ampere 2019. Universitat Politècnica de València, 2019. http://dx.doi.org/10.4995/ampere2019.2019.9998.

Full text
Abstract:
Zinc sulphide (ZnS) and zinc selenide (ZnSe) and manganese-doped and un-doped with different morphologies from 1D do 3D microflowers were successfully fabricated in only a few minutes by solvothermal reactions under microwave irradiation. In order to compare the effect of microwave heating on the properties of obtained nanocrystals, additionally the synthesis under conventional heating was conducted additionally in similar conditions. The obtained nanocrystals were systematically characterized in terms of structural and optical properties using X-ray diffraction (XRD), scanning electron micros
APA, Harvard, Vancouver, ISO, and other styles
10

Harris, D. H. "Time Domain Simulation of a Yacht Sailing Upwind in Waves." In SNAME 17th Chesapeake Sailing Yacht Symposium. SNAME, 2005. http://dx.doi.org/10.5957/csys-2005-002.

Full text
Abstract:
A time domain maneuvering simulation of an IACC class yacht suitable for the analysis of unsteady upwind sailing and tacking is presented. The simulation code (RODAN) considers motions in six degrees of freedom. The hydrodynamic and aerodynamic loads are calculated primarily with unsteady potential theory supplemented by empirical models. The hydrodynamic model includes the effects of incident waves. Control of the rudder is provided by a simple feedback autopilot which is tuned to mimic human steering. The hydrodynamic models are based on the superposition of force components. The components
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "RTG diffraction"

1

Clapham, Lynann, and Vijay Babbar. PR-320-113706-R01 Neutron Diffraction Measurements of Residual Strain from Dents and Gouges in Pipelines. Pipeline Research Council International, Inc. (PRCI), 2020. http://dx.doi.org/10.55274/r0011643.

Full text
Abstract:
Mechanical damage is one of the most prevalent causes of pipeline failure in North America and Europe. Gouged dents are much more likely to produce a failure than "plain" dents (i.e., a dent with no coincident metal loss or crack features), however the residual stresses around gouged dents are more difficult to model and predict. The Pipeline Aggression Rig (PAR) located in the St. Denis facility of GdF Suez was used to introduce backhoe-type gouging into pipe samples, which were nine pressurized pipe sections of varying grades. Five (5) samples were created using high-impact dynamic aggressio
APA, Harvard, Vancouver, ISO, and other styles
2

Shomer, Ilan, Ruth E. Stark, Victor Gaba, and James D. Batteas. Understanding the hardening syndrome of potato (Solanum tuberosum L.) tuber tissue to eliminate textural defects in fresh and fresh-peeled/cut products. United States Department of Agriculture, 2002. http://dx.doi.org/10.32747/2002.7587238.bard.

Full text
Abstract:
The project sought to understand factors and mechanisms involved in the hardening of potato tubers. This syndrome inhibits heat softening due to intercellular adhesion (ICA) strengthening, compromising the marketing of industrially processed potatoes, particularly fresh peeled-cut or frozen tubers. However, ICA strengthening occurs under conditions which are inconsistent with the current ideas that relate it to Ca-pectate following pectin methyl esterase (PME) activity or to formation of rhamnogalacturonan (RG)-II-borate. First, it was necessary to induce strengthening of the middle lamellar c
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'RTG diffraction' for particular source types:
Journal articles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography