Relevant bibliographies by topics / Sampah plastik

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Sampah plastik'

Author: Grafiati
Published: 3 June 2025
Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Sampah plastik.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Sampah plastik"

1

Halim, Wandy, and Franky Liauw. "GALERI EDUKASI PLASTIK DENGAN PENDEKATAN METODE PERANCANGAN PLASTIS." Jurnal Sains, Teknologi, Urban, Perancangan, Arsitektur (Stupa) 3, no. 2 (2022): 1361. http://dx.doi.org/10.24912/stupa.v3i2.12297.

Full text
Abstract:
In human life, waste is a problem that will inevitably become, and will never end. This waste problem is caused by high human consumptive behavior. Plastic waste is one of the waste problems that need serious attention because the problem of plastic waste has become a global environmental problem. To be able to overcome this large plastic waste, it takes speed in absorbing plastic waste and its use in the field of processing because plastic waste is waste that is very difficult to decompose. In Indonesia, public awareness and knowledge of plastic waste are still very lacking, so that the proce
APA, Harvard, Vancouver, ISO, and other styles
2

Hadi, Saiful. "Zero Plastic Campus: Fostering Vision and ‎Mission of Prophetic Values into The Behavior ‎of Campus Community." TADRIS: Jurnal Pendidikan Islam 17, no. 1 (2022): 43–59. http://dx.doi.org/10.19105/tjpi.v17i1.5840.

Full text
Abstract:
Salah satu diantara nilai pendidikan Islam yang universal adalah menubuhkan perilaku manusia eksistensi lingkungan yang ramah belajar khususnya di kampus, melalui upaya menjaga dan memelihara lingkungan bebas dari sampah plasik, salah satunya melalui mendesain nilai profetik pada “lingkungan fisik” dan “lingkungan sosial” yang ada di kampus, kedua unsur lingkungan tersebut merupakan satu kesatuan yang harus didesain agar ramah untuk belajar.
 Menubuhkan perilaku individu dan kelompok menjaga lingkungan yang ramah bebas plastik masih sedikit yang membahas, khususnya dari sudut pandang keag
APA, Harvard, Vancouver, ISO, and other styles
3

Pratiwi, Fika Dewi, Hartoyo Notonegoro, and Jeanne Darc Noviayanti Manik. "Implementasi Projek Penguatan Profil Pelajar Pancasila (P5) “Zero Waste School-Plastic”." RESWARA: Jurnal Pengabdian Kepada Masyarakat 6, no. 1 (2025): 230–38. https://doi.org/10.46576/rjpkm.v6i1.5038.

Full text
Abstract:
Sampah plastik yang berakhir di wilayah perairan, mengancam kelestarian sumber daya perikanan dan kelautan, keamanan pangan komoditi perikanan serta kelestarian pariwisata Bahari di Pulau Bangka. Pendekatan strategis diperlukan untuk mengedukasi generasi muda di sekolah terhadap permasalahan sampah plastik yang ada di lingkungan sekitar. Kondisi eksisting, permasalahan internal yang dihadapi sekolah UPTD. SMPN 02 Merawang diantaranya minimnya literasi siswa tentang plastik dan mikroplastik, siswa terbiasa menggunakan single used plastic, tidak mampu mengidentifikasi kemasan plastik food grade.
APA, Harvard, Vancouver, ISO, and other styles
4

Sukadi, Sukadi, and Novarini Novarini. "RANCANG BANGUN ALAT PIROLISIS UNTUK DAUR ULANG SAMPAH KANTONG PLASTIK." TEKNIKA: Jurnal Teknik 5, no. 2 (2019): 96. http://dx.doi.org/10.35449/teknika.v5i2.86.

Full text
Abstract:
ABSTRAK 
 Sampah merupakan masalah nasional yang belum terselesaikan sampai saat ini. Khususnya di kota Jambi penumpukan sampah cenderung meningkat dan tidak terkendali. Sampah plastik merupakan sampah yang tidak bisa teruarai sehingga dapat memberikan dampak yang buruk bagi lingkungan. Perlu adanya teknologi untuk mengolah sampah plastik sehingga pencemaran terhadapa lingkungan dapat diminimalkan. Salah satu metode yang bisa dilakukan adalah metode pirolisis. Disini akan dibuat rancang bangun alat pirolisis dimana sampah yang digunakan sebagai bahan pirolisis adalah sampah kantong plasti
APA, Harvard, Vancouver, ISO, and other styles
5

Arsana, Made Ery, I. Kadek Ervan Hadi Wiryanta, I. Putu Adi Wiguna, and I. Nyoman Artha Gunawan. "Pengujian mekanis komposit rice starch – organic clay sebagai bahan alternatif kotak pendingin makanan." Journal of Applied Mechanical Engineering and Green Technology 2, no. 2 (2021): 85–90. http://dx.doi.org/10.31940/jametech.v2i2.2717.

Full text
Abstract:
Sampah plastik sudah menjadi permasalahan yang menjadi isu utama mengenai sampah di dunia saat ini. Produksi plastik di dunia sudah mencapai 8300 juta metrik ton (Mt) dari tahun 1950 sampai tahun 2015 dan 6.300 Mt adalah limbah berupa sampah plastik. Upaya yang bisa kita lakukan untuk mengurangi limbah plastik ini, dengan menggunakan plastik yang ramah lingkungan seperti bio-plastik. Bio-plastik dapat terurai di alam secara alami. Berbagai teknologi pembuatan bioplastik berdasarkan dari tumbuhan yang dapat tumbuh di Indonesia telah diperkenalkan, termoplastic tersebut menggunakan bahan dasar p
APA, Harvard, Vancouver, ISO, and other styles
6

Cahyono, Gunawan Rudi, Apip Amrullah, and Pathur Razi Ansyah. "Pengolahan Sampah Plastik Menggunakan Metode Tsc-Pyrolysis Menjadi Bahan Bakar Plastic Oil Pada Bank Sampah Khalid Banjarbaru." Jurnal Pengabdian ILUNG (Inovasi Lahan Basah Unggul) 2, no. 3 (2023): 436. http://dx.doi.org/10.20527/ilung.v2i3.6450.

Full text
Abstract:
Dalam Rencana Strategis 2016 – 2021 Dinas Lingkungan Hidup Kota Banjarbaru guna memberikan pelayanan kepada masyarakat dalam pengelolaan lingkungan hidup, dimana Dengan jumlah penduduk Kota Banjarbaru perkiraan Tahun 2019 sebanyak 258.460 jiwa dengan angka pertumbuhan penduduk 2 % maka volume sampah di Kota Banjarbaru Tahun 2019 adalah : 258.460x 0.5 Kg = 129.230 Kg atau 129,23 Ton/Hari. Hal ini menggerakan kelompok masyarakat untuk membangun kelompok pengelolaan sampah dalam upaya manajemen sampah di lingkungan sendiri seperti Bank Sampah Khalid yang pernah berhasil meraih Peringkat 3 “Penila
APA, Harvard, Vancouver, ISO, and other styles
7

Zainuri, Zainuri. "Penanganan Sampah Plastik pada Produksi Paving Block." Jurnal Teknologi Lingkungan 22, no. 2 (2021): 170–77. http://dx.doi.org/10.29122/jtl.v22i2.4586.

Full text
Abstract:
ABSTRACT Efforts to handle waste are continuously carried out, starting from the lowest layer, namely households, to large factories that produce garbage every day. Waste production that is not balanced with the handlers causes waste to be a problem for the environment. One type of waste that is difficult to decompose by nature (non-biodegradable) is plastic waste, which occupies the most considerable quantity of other types of waste. Based on statistical data, the amount of non-biodegradable waste that is disposed of in the final disposal site every day in several cities in Indonesia is 6,598
APA, Harvard, Vancouver, ISO, and other styles
8

Ervinawati, Ervinawati, Zulkifli Musannip Efendi Siregar, and Fadzil Hanafi Asnora. "Memberdayakan Limbah Kantong Plastik Menjadi Nilai Yang Ekonomis Di Madrasah Ibtidaiyah Al Ikhlas Dusun Sidomulyo." Jurdimas (Jurnal Pengabdian Kepada Masyarakat) Royal 5, no. 2 (2022): 205–10. http://dx.doi.org/10.33330/jurdimas.v5i2.1493.

Full text
Abstract:
Abstract: The existence of plastic waste has always been a major problem that threatens environmental sustainability. Increased plastic pollution in the soil can cause adverse effects on crops, and affect soil fertility. Plants are important for the environment and ecosystem so that plastic damages plants in the ecosystem. Community service activities carried out are in the form of training. The methods used in this training are preparing tools and materials, presentation of training materials and product manufacturing techniques, and product manufacturing processes. This plastic waste recycli
APA, Harvard, Vancouver, ISO, and other styles
9

Sofiana, Tia, and Darumoyo Dewojati. "Pemanfaatan residu sampah plastik menjadi aksesori." Sungging 1, no. 2 (2022): 141–46. http://dx.doi.org/10.21831/sungging.v1i2.57562.

Full text
Abstract:
Penelitian ini bertujuan untuk mendeskripsikan latar belakang, proses, dan hasil pemanfaatan residu sampah plastik menjadi aneka aksesori di Yayasan Get Plastic Indonesia. Penelitian ini merupakan penelitian deskriptif dengan menggunakan pendekatan kualitatif. Deskriptif kualitatif berupa pengambilan data yang dilakukan melalui proses observasi, wawancara dan dokumentasi. Subjek penelitian ini adalah anggota Yayasan Get Plastic Indonesia dan objek penelitian ini adalah residu sampah plastik yang dijadikan aneka aksesori. Teknik analisis data yang digunakan yaitu reduksi data, penyajian data, s
APA, Harvard, Vancouver, ISO, and other styles
10

Fitriani, Syifa, and Amalia Yuli Astuti. "PEMETAAN JARINGAN SAMPAH PLASTIK DI KOTA YOGYAKARTA." Jurnal PASTI 15, no. 1 (2021): 73. http://dx.doi.org/10.22441/pasti.2021.v15i1.007.

Full text
Abstract:
Sampah plastik merupakan salah satu contoh sampah jenis anorganik, yaitu merupakan jenis sampah yang tidak mudah terurai. Penyumbang sampah plastik ini terbanyak berasal dari sampah rumah tangga. Pada Kota Yogyakarta sendiri volume sampah plastik meningkat setiap tahunnya. Pengelolaan sampah plastik seperti Reduce, Reuse Dan Recycle atau yang dikenal dengan 3R perlu dilakukan guna meminimalisir volume sampah. Apabila aktivitas ini hanya berhenti di bank sampah, maka program pengelolaan sampah plastik belum terprogram dengan baik karena hanya menumpuk saja di bank sampah. Tujuan penelitian ini
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Sampah plastik"

1

Norfleet, David M. "Sample size effects related to nickel, titanium and nickel-titanium at the micron size scale." The Ohio State University, 2007. http://rave.ohiolink.edu/etdc/view?acc_num=osu1187038020.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Wei, Jing. "Systematic Design of Bulk Recycling Systems under Uncertainty." Diss., Georgia Institute of Technology, 2004. http://hdl.handle.net/1853/4978.

Full text
Abstract:
The fast growing waste stream of electronic and other complex consumer products is making the bulk recycling problem an important environmental protection issue. These products must be recycled because they contain hazardous materials such as lead and mercury. The focus of this thesis is the development of systematic methods for designing systems to recover mixed plastics from electronic products such as computers and televisions. Bulk recycling systems are similar to other chemical engineering process systems. Therefore they can be synthesized and designed using some existing techniques that
APA, Harvard, Vancouver, ISO, and other styles
3

Roncari, Chiara. "Evaluation of microplastic content in faecal sample from hospitalized loggerhead sea turtles (Caretta caretta) of the North Adriatic Sea." Master's thesis, Alma Mater Studiorum - Università di Bologna, 2020. http://amslaurea.unibo.it/20386/.

Full text
Abstract:
Microplastics represent persistent and highly dispersal pollutants in the marine environment. The knowledge about ingestion and relative effects in large marine vertebrates, such as sea turtles, is still fragmentary. To date, studies on MP accumulation in these animals were based on the analysis of gastrointestinal tracts obtained after necropsy. In this study, we developed a protocol that allows the study of the MP through faecal material from alive turtles, that can be used in rescue centres in several locations. Specifically, faecal samples from 45 specimens of Caretta caretta, rescued alon
APA, Harvard, Vancouver, ISO, and other styles
4

Adawi, Rahim. "Preventing fatal effects of overworking : Product design solution." Thesis, Högskolan i Skövde, Institutionen för ingenjörsvetenskap, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:his:diva-15473.

Full text
Abstract:
“Overworking to death” is a phenomenon that has been noticeable in developing countries. The cause of death is mainly through ischemic strokes. While the victims’ occupations differed, they all shared a common characteristic, being positioned in a sedentary work, ranging from IT workers to doctors. This project’s aim was to develop a product that prevented or decreased the strokes that derived from sedentary overwork. This was mainly tackled by preventing one of the three causes of developing blood props, slowed blood flow. In order to gather rich data of the phenomenon, a qualitative study wa
APA, Harvard, Vancouver, ISO, and other styles
5

Ferreira, João Pedro Rodrigues. "Influence of temperature on the sorption-desorption curves of earth-based materials and consequences on their hygrothermal behaviour." Master's thesis, 2016. http://hdl.handle.net/10362/20160.

Full text
Abstract:
There has been a rising interest by the building sector in using passive solutions to regulate the indoor relative humidity, since humidity levels can directly affect the health and comfort of the occupants. Earth based materials are known for their ability to regulate the relative humidity and improve indoor comfort. Another motivation is the potential to reduce the energy consumption of air conditioning systems. The assessment of the hygrothermal transfers within earthen walls/plasters has been the focus of many researchers, but the proper modelling and coupling of these characteristics fo
APA, Harvard, Vancouver, ISO, and other styles
6

Sahoo, Anup Kumar. "MODELS FOR ASSESSMENT OF FLAWS IN PRESSURE TUBES OF CANDU REACTORS." Thesis, 2009. http://hdl.handle.net/10012/4329.

Full text
Abstract:
Probabilistic assessment and life cycle management of engineering components and systems in a nuclear power plant is intended to ensure safe and efficient operation of energy generation over its entire life. The CANDU reactor core consists of 380-480 pressure tubes, which are like miniature pressure vessels that contain natural uranium fuel. Pressure tubes operate under severe temperature and radiation conditions, which result in degradation with ageing. Presence of flaws in a pressure tube makes it vulnerable to delayed hydride cracking (DHC), which may lead to rupture or break-before-leak s
APA, Harvard, Vancouver, ISO, and other styles

Books on the topic "Sampah plastik"

1

Blaschka, Martina. Tupperware als Lebensform: Die Schüssel, die Party, die Beraterin : eine empirische Studie. Tübinger Vereinigung für Volkskunde, 1998.

Find full text
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Sampah plastik"

1

Hale, Robert C., Meredith E. Seeley, Ashley E. King, and Lehuan H. Yu. "Analytical Chemistry of Plastic Debris: Sampling, Methods, and Instrumentation." In Microplastic in the Environment: Pattern and Process. Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-78627-4_2.

Full text
Abstract:
AbstractApproaches for the collection and analysis of plastic debris in environmental matrices are rapidly evolving. Such plastics span a continuum of sizes, encompassing large (macro-), medium (micro-, typically defined as particles between 1 μm and 5 mm), and smaller (nano-) plastics. All are of environmental relevance. Particle sizes are dynamic. Large plastics may fragment over time, while smaller particles may agglomerate in the field. The diverse morphologies (fragment, fiber, sphere) and chemical compositions of microplastics further complicate their characterization. Fibers are of grow
APA, Harvard, Vancouver, ISO, and other styles
2

Kartik, S., Hemant K. Balsora, Abhishek Sharma, et al. "Distributed Activation Energy Model for Thermal Decomposition of Polypropylene Waste." In Springer Proceedings in Energy. Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-63916-7_23.

Full text
Abstract:
AbstractThermal decomposition kinetics of Polypropylene (PP) waste is extremely important with respect to valorisation of waste plastics and production of utilizable components viz. chemicals, fuel oil & gas. The present research study focuses on pyrolysis kinetics of PP waste, which is present as a fraction of municipal plastic waste through distributed activation energy model (DAEM). The decomposition kinetics for PP follows a Gaussian distribution, where the normal distribution curves were centred corresponding to activation energy of 224 kJ/mol. The standard deviation of the distributi
APA, Harvard, Vancouver, ISO, and other styles
3

Prabhakar, Srijan, D. Ravi Kumar, and S. Aravindan. "Numerical and Experimental Investigation of Multi-axial Forging of AA6082 Alloy." In Lecture Notes in Mechanical Engineering. Springer International Publishing, 2024. http://dx.doi.org/10.1007/978-3-031-58006-2_3.

Full text
Abstract:
AbstractMulti-axial forging is a useful technique for producing ultrafine-grained structures in bulk materials by means of severe plastic deformation. The workpiece is subjected to a specific plastic strain in the multi-axial forging process by repeatedly upsetting along all three axes by rotating the sample by 90° between the two passes; this leads to the accumulation of a large plastic strain in the material. The shape of the product does not change, as equal compressive strain is applied in all directions. Severe plastic deformation methods such as multi-axial forging can be used for produc
APA, Harvard, Vancouver, ISO, and other styles
4

Lu, D., Z. Sheng, B. Yan, and Z. Jiang. "Co-effects of Graphene Oxide and Silica Fume on the Rheological Properties of Cement Paste." In Lecture Notes in Civil Engineering. Springer Nature Singapore, 2023. http://dx.doi.org/10.1007/978-981-99-3330-3_26.

Full text
Abstract:
AbstractPolycarboxylate superplasticizer is typically used to prepare a high-quality graphene oxide (GO) solution before mixing with cement grains. However, even if GO is well dispersed in water, they tend to re-agglomerate in the alkaline cement hydration environment, thus seriously decreasing the workability of the fresh mixture. In this study, we propose a more targeted method by synthesizing GO-coated silica fume (SF) to promote the utilization of GO in cement-based materials. Specifically, the surface of pristine SF was modified to convert their zeta potential (modified SF: MSF), then GO-
APA, Harvard, Vancouver, ISO, and other styles
5

Schlag, Mareike, Kai Brune, Hauke Brüning, et al. "Extended Non-destructive Testing for Surface Quality Assessment." In Adhesive Bonding of Aircraft Composite Structures. Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-319-92810-4_3.

Full text
Abstract:
AbstractThis chapter introduces various extended non-destructive testing (ENDT) techniques for surface quality assessment, which are first characterized, then enhanced, and finally applied to assess the level of pre-bond contaminations intentionally applied to carbon fiber reinforced plastic (CFRP) adherends following the procedures described in the previous chapter. Based on two user cases comprising different scenarios that are characteristic of either aeronautical production or repair, the detailed tests conducted on two types of sample geometry, namely flat coupons and scarfed pilot sample
APA, Harvard, Vancouver, ISO, and other styles
6

Khanh, Luong Quoc, Tran Hoang Phuc, Nguyen Dinh Quang, et al. "The Effect of Glass Fiber on the Notched Izod Impact Strength of Polybutylene Terephthalate/Glass Fiber Blends’." In Lecture Notes in Civil Engineering. Springer Nature Singapore, 2024. http://dx.doi.org/10.1007/978-981-97-4355-1_49.

Full text
Abstract:
AbstractImproving the fire resistance of polymer and construction materials is an urgent requirement today. This article aims to study the incorporation of Polybutylene terephthalate (PBT), a versatile polymer used in most glass fiber (GF) combination fields, to study their fire resistance and impact resistance for manufacturing battery housings. We conducted injection molding and scanning electrode microscopy (SEM) and had the expected results. The impact strength of PBT/GF samples measured according to ASTM D256 is 4.69, 4.43, 3.71, 4.67, and 6.28 kJ/m2. The PBT/25% GF sample achieved the hi
APA, Harvard, Vancouver, ISO, and other styles
7

Satapathy, Suchismita, Divyalok Samal, Partha Pratim Sarmah, Tushar Mandal, Abhinav Sinha, and Simranpreet Singh. "Recycled Raw Banana Peels for Bioplastics." In Green Chemistry for the Development of Eco-Friendly Products. IGI Global, 2022. http://dx.doi.org/10.4018/978-1-7998-9851-1.ch006.

Full text
Abstract:
Petroleum-based plastics may not be sustainable in the long run as crude oil will get scarce. Hence, it is imperative to find alternative sources of material from which plastics can be prepared. Starch, found abundantly in raw banana peel, which is a well-known kitchen waste, can be used to prepare biodegradable plastics. The preparation and some of its properties including its biodegradability have been studied here. A homemade DIY bioplastic sample has been prepared and its biodegradability tested. The world today is suffering an unprecedented menace of plastic pollution. The ubiquitous pres
APA, Harvard, Vancouver, ISO, and other styles
8

Aly, Al. "Brachioplasty." In Operative Plastic Surgery, edited by Gregory R. D. Evans. Oxford University Press, 2019. http://dx.doi.org/10.1093/med/9780190499075.003.0018.

Full text
Abstract:
Massive weight loss (MWL) patients often present with fairly extensive excess skin of the upper arms. The excess is located in the posterior axillary roll and the Aly posterior brachioplasty technique is designed to eliminate as much excess tissue as is required to create an arm contour that follows the normal underlying musculoskeletal anatomy. One of the major contributions that the author feels he has made to brachioplasty surgery is the delineation of the posterior axillary fold and its extension onto the upper arm as the deformity encountered in all MWL patients. Presurgical assessment an
APA, Harvard, Vancouver, ISO, and other styles
9

"Front Matter." In Elastic-Plastic Fracture Mechanics Technology. ASTM International100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, 1985. http://dx.doi.org/10.1520/stp35311s.

Full text
Abstract:
Divided into two sections: • the results of an experimental and predictive round robin designed to evaluate current EPFM methods • the presentation of four EPFM methods, including the steps required for application, and sample calculation.
APA, Harvard, Vancouver, ISO, and other styles
10

Osman Ashraf and Bolton Malcolm. "Teaching geotechnical engineers to avoid excessive deformations." In Proceedings of the 16th International Conference on Soil Mechanics and Geotechnical Engineering. IOS Press, 2005. https://doi.org/10.3233/978-1-61499-656-9-2837.

Full text
Abstract:
This paper introduces a design approach based directly on the data of carefully chosen soil tests, conceived within the framework of plasticity theory, but allowing for strain-hardening. Mobilized shear stresses beneath foundations, for example, are found by using conventional bearing capacity factors. Strains required to mobilize these stresses are deduced from a triaxial test on a representative sample taken from a specified location in the plastic zone of influence. These strains are entered into a simple plastic deformation mechanism to predict boundary displacements.
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Sampah plastik"

1

Zamanzadeh, Mehrooz, Colleen S. Miller, and George T. Bayer. "Failure Analysis of Plastics – Methodology and Case Studies." In CORROSION 2008. NACE International, 2008. https://doi.org/10.5006/c2008-08528.

Full text
Abstract:
Abstract Failure analysis methodology is applied to the principal mechanisms by which plastics fail during service. Several important factors often associated with component failures are deficiency in design, fabrication, unsuitable service conditions, materials selection, and expended useful life. These factors are of primary consideration. The failure analysis procedure, or methodology for evaluation, is provided in a step by step approach. This includes justification for conducting a failure analysis investigation, developing a logical plan for the investigation to follow, collection of bac
APA, Harvard, Vancouver, ISO, and other styles
2

Soedira, Daniel, Muhammad Qordhowi, and Radon Dhelika. "Effect of Plastic Mixture in the Shredded E-waste Sample to the Performance of an Eddy-Current Separator." In Seminar Nasional Tahunan Teknik Mesin XXII 2024. Badan Kerja Sama Teknik Mesin Indonesia, 2025. https://doi.org/10.71452/590790.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Wang, Z. F., C. L. Briant, and K. S. Kumar. "Mechanism of Crack Propagation in CP-Titanium Containing Hydrides." In CORROSION 2001. NACE International, 2001. https://doi.org/10.5006/c2001-01239.

Full text
Abstract:
Abstract Crack propagation in grade 2 and grade 3 titanium was investigated, both in an inert oil and in a 6%NaCl solution under anodic and cathodic potential control. At an applied cathodic potential, hydrogen was generated and could enhance crack propagation, especially for grade 3 titanium. The fracture surface and appearance of the crack tip were examined in detail by scanning electron microscopy. This analysis showed that crack propagation was controlled by plastic deformation at the crack tip in α-titanium. If hydrides were formed in the area ahead of the crack tip during crack propagati
APA, Harvard, Vancouver, ISO, and other styles
4

Ozcanli, Mustafa, Berkay Karacor, Belkıs Zervent Ünal, and Ahmet Çalik. "Innovative Use of Textile Waste for Automotive Applications." In 10th International Scientific Conference on Advances in Mechanical Engineering. Trans Tech Publications Ltd, 2025. https://doi.org/10.4028/p-x1hrog.

Full text
Abstract:
Waste materials (WAS) have recently been recycled into the environment and are materials that come to the fore in terms of both cost and environmental use. The waste material used in this study is a type of material classified as waste in a local textile factory due to the raising process, which cannot be converted back into textile. In this study, the effects of 5%, 10%, 15%, 20%, 25%, 30% and 40% waste raising on the mechanical and physical properties of the composite samples produced by combining them with epoxy were investigated. For comparison purposes, fabric reinforced samples made in p
APA, Harvard, Vancouver, ISO, and other styles
5

Jati, Dian Rahayu, and Dawud Abullah Azzaki. "Analisis Potensi Ekonomi Sampah Plastik Berdasarkan Jenis dari Aktivitas Kafe, Kantin dan Futsal di Kota Pontianak." In Seminar Nasional Penerapan Ilmu Pengetahuan dan Teknologi : kampus merdeka meningkatkan kecerdasan sumberdaya manusia melalui interdispliner ilmu pengetahuan dan teknologi : Pontianak, 24 Agustus 2021. Untan Press, 2021. http://dx.doi.org/10.26418/pipt.2021.1.

Full text
Abstract:
Produksi sampah plastik yang terus meningkat perlu penanganan lebih lanjut karena dapat mengakibatkan permasalahan serius. Nilai ekonomis sampah plastik bisa didapatkan melalui berbagai proses pengolahan, seperti: daur ulang menjadi bijih plastik untuk dimanfaatkan sebagai produk plastik yang baru. Penelitian ini dilakukan pada kafe, kantin, dan gedung futsal yang menghasilkan jenis sampah plastik terutama jenis Polyethylene Terephthalate (PET) dan Polyprophylene (PP). Produk sampah plastik ini kemudian mengkonversikan harga sesuai dengan harga pasar untuk menentukan potensi ekonominya. Pengum
APA, Harvard, Vancouver, ISO, and other styles
6

Rockwood, Lila, Abigail Knipe, Jayme McAdam, Leia Kaminsky, and John Misasi. "IMPACTS OF RECYCLED AIRCRAFT INTERIORS ON THE PROPERTIES OF OCEAN PLASTIC PET." In SAMPE 2025 Indianapolis. Society for the Advancement of Material and Process Engineering, 2025. https://doi.org/10.33599/nasampe/s.25.0128.

Full text
Abstract:
This work studied the impacts of mechanically recycled aircraft interior (rAI) panels on the properties of recycled ocean plastic poly(ethylene terephthalate) (opPET). Panels from rAI were size-reduced into a multi-material mixture, compounded into opPET in four different concentrations, and then injection molded into specimens. Processability of the blends during compounding and injection molding is discussed. Thermal degradation characteristics from thermal gravimetric analysis follow a rule of mixtures relationship, where increasing rAI content increased char yield and decreased degradation
APA, Harvard, Vancouver, ISO, and other styles
7

van Hattum, F., M. Vecchio, and I. Bruggencate. "Upcycling Waste Plastics for High-Value Continuous Fibre Reinforced Composites Applications." In SAMPE 2022. NA SAMPE, 2022. http://dx.doi.org/10.33599/nasampe/s.22.0722.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Lin, Pei-Ju, and Jun-Yu Yang. "Customer Preference of Recycled Plastic Products." In 13th International Conference on Applied Human Factors and Ergonomics (AHFE 2022). AHFE International, 2022. http://dx.doi.org/10.54941/ahfe1001770.

Full text
Abstract:
The circular economy of recycled plastics is gradually emerging. Its objective is to reduce the production of new plastics, design products with recycled plastics according to the thermoplastic characteristics of plastics, classify, wash, dry, finely shred, and then melt and remanufacture waste plastics to reshape the appearance and function of products. In this study, consumers’ acceptance, cognition, and preference for recycled plastic products were explored based on the image these products carry. A total of 11 commercially available recycled plastic products were collected, which were resp
APA, Harvard, Vancouver, ISO, and other styles
9

Hsiao, Emma, Juowen Mao, Michael Hsiao, and Kuang-Ting Hsiao. "NOVEL NON-DESTRUCTIVE EVALUATION METHOD OF USING EMBEDDED INSULATED CARBON FIBER SENSOR FOR STRUCTURAL HEALTH MONITORING OF CARBON FIBER REINFORCED POLYMER LAYER LAP-BONDED ADDITIVE-MANUFACTURED PLASTIC PARTS." In SAMPE 2025 Indianapolis. Society for the Advancement of Material and Process Engineering, 2025. https://doi.org/10.33599/nasampe/s.25.0095.

Full text
Abstract:
Additive manufacturing (AM) plays an important role in Industry 4.0, being increasingly used for prototyping and producing functional parts in almost all industrial sectors. However, parts produced by AM generally are weaker than parts produced by traditional molding and subtractive manufacturing methods. AM parts also have size limitations inherited from the 3D-printer’s manufacturing limitations. If desired, AM parts can be lap-bonded with carbon fiber tapes/fabric for reinforcement or parts-joining. The insulated carbon fiber sensor (ICFS) correlates its mechanical strain with the electrica
APA, Harvard, Vancouver, ISO, and other styles
10

Middendorf, P., and F. Urban. "Macroscopic Modeling of the Linear Viscoelastic Vibration Behavior of Short Fiber Reinforced Plastics." In SAMPE 2020 | Virtual Series. NA SAMPE, 2020. http://dx.doi.org/10.33599/382/s.20.0015.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Sampah plastik"

1

Beck, Aaron. North Sea Plastics I: Fate and impact of river-borne microplastics and their chemical additives in the North Sea Cruise No. AL586, 04 February – 10 February 2023, Kiel, DE – Kiel, DE. GEOMAR Helmholtz Centre for Ocean Research Kiel, Germany, 2024. https://doi.org/10.3289/cr_al586.

Full text
Abstract:
The river source of plastic debris to the southern North Sea region appears to be increasing over the past several decades, with a strong seasonal control on riverine MP transport and discharge. The current cruise, AL586, links plastic pollution in the North Sea to seasonal studies in the Elbe and Thames rivers as part of the H2020 LABPLAS project, with the objective to understand the transport and fate of river-derived small micro- and nanoplastics (SMNPs) in the North Sea. The specific objectives of the North Sea Plastics I & II cruises (the current cruise AL586 and planned cruise AL596)
APA, Harvard, Vancouver, ISO, and other styles
2

Beck, Aaron, and Anja Engel. North Sea Plastics II: Fate and impact of river-borne microplastics and their chemical additives in the North Sea Cruise No. AL596, 26 June – 02 July 2023, Kiel, DE – Kiel, DE. GEOMAR Helmholtz Centre for Ocean Research Kiel, Germany, 2024. https://doi.org/10.3289/cr_al596.

Full text
Abstract:
The river source of plastic debris to the southern North Sea region appears to be increasing over the past several decades, with a strong seasonal control on riverine MP transport and discharge. The current cruise, AL596, links plastic pollution in the North Sea to seasonal studies in the Elbe and Thames rivers as part of the H2020 LABPLAS project, with the objective to understand the transport and fate of river-derived small micro- and nanoplastics (SMNPs) in the North Sea. The specific objectives of the North Sea Plastics I & II cruises (the current cruise AL596 and previous cruise AL586
APA, Harvard, Vancouver, ISO, and other styles
3

Nadeau, Elisabet, Dan-Axel Danielsson, and Kristina Holmström. Utvärdering av sträckfilm och mantelfilm till rundbalat ensilage och plastfilm till hackat ensilage. Department of Applied Animal Science and Welfare, Swedish University of Agricultural Sciences, 2025. https://doi.org/10.54612/a.4b4q7i4aro.

Full text
Abstract:
Många fodergrödor ensileras och i de flesta fall används plast. Det kan vara runt rundbalar eller som täckning i plansilo. Plasten i sig är en belastning på klimatet, men det är också de förluster som sker under fermenteringen. Syftet med denna studie var att studera effekten av olika typer av sträckfilm, antal lager sträckfilm och mantelfilm i stället för nät på rundbalens densitet och täthet samt ensilagets fermenteringskvalitet, lagringsstabilitet, klimatavtryck och kostnader samt att studera effekten av olika typer av plansilofilm med och utan underlagsfilm på samma parametrar. Studien utf
APA, Harvard, Vancouver, ISO, and other styles
4

Tan, Li, Qiong Liu, Yun Chen, et al. Efficacy of sonic activation techniques on tubular dentin sealer penetration：A systematic review and meta-analysis. INPLASY - International Platform of Registered Systematic Review and Meta-analysis Protocols, 2022. http://dx.doi.org/10.37766/inplasy2022.7.0116.

Full text
Abstract:
Review question / Objective: Is sonic activation techniques more effective than conventional needle irrigation for the tubular dentin sealer penetration. The included study was a randomized controlled trial. Eligibility criteria: A comprehensive search was conducted for all published studies evaluating efficacy of percentage and maximum depth of sealer penetration, following the use of SI and standardized irrigants (NaOCl and EDTA). Because this can hardly be measured clinically, only confocal laser scanning microscopy (CLSM) studies were selected owing to wide use of this methodology for eval
APA, Harvard, Vancouver, ISO, and other styles
5

Hallett, J. B. L51525 Sizing of Girth Weld Defects Using Focused Ultrasonic Beams. Pipeline Research Council International, Inc. (PRCI), 1987. http://dx.doi.org/10.55274/r0010202.

Full text
Abstract:
This project was produced to evaluate the performance of focused beams in sizing and positioning defects in pipeline girth welds. The sound beams from standard flat transducers were focused using acoustic lenses. Two types of plastics, having different sound velocities are used in the design of these lenses. One is used for the lens and the other for the wedge. The profile of the lens/wedge boundary was designed to focus the sound at a selected depth. The design takes into account the beam angle, beam diameter, focal point and working range required. The effects of test surface curvature were
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Sampah plastik' for particular source types:
Journal articles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography