Relevant bibliographies by topics / Sandblasting nozzle

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Conference papers

Academic literature on the topic 'Sandblasting nozzle'

Author: Grafiati
Published: 28 May 2022
Last updated: 30 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Sandblasting nozzle.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Sandblasting nozzle"

1

Harmoko, Harmoko, and Risal Ngizudin. "Investigasi Kecepatan dan Jarak Nozel Proses Sandblasting Terhadap Kekasaran Permukaan pada Baja Karbon Rendah." Jurnal Ilmiah Universitas Batanghari Jambi 23, no. 2 (2023): 1210. http://dx.doi.org/10.33087/jiubj.v23i2.3207.

Full text
Abstract:
Sandblasting is a method for cleaning metal surfaces such as rust, oil, dust, and other impurities and for obtaining surface roughness by spraying abrasive materials using a compressor. The aim of the research is as an alternative to cleaning the metal surface and to get the surface roughness of low-carbon steel. This research used variations in sandblasting speed at 60 mm/minute, 120 mm/minute and 180 mm/minute and the nozzle spacing was 10 cm, 15 cm, and 20 cm. Surface roughness testing using Surface Roughness. The results showed that the sandblasting speed of 120 mm/minute had the highest s
APA, Harvard, Vancouver, ISO, and other styles
2

SAITO, Hideo, and Nobuo OGAWA. "Sandblasting Flat Nozzle by Annular Flows." Proceedings of the Fluids engineering conference 2004 (2004): 240. http://dx.doi.org/10.1299/jsmefed.2004.240.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Miturska-Barańska, Izabela, Anna Rudawska, and Elżbieta Doluk. "The Influence of Sandblasting Process Parameters of Aerospace Aluminium Alloy Sheets on Adhesive Joints Strength." Materials 14, no. 21 (2021): 6626. http://dx.doi.org/10.3390/ma14216626.

Full text
Abstract:
In this study, the influence of sandblasting process parameters as a surface preparation method on the strength of single-lap adhesive joints of EN AW 2024 T3 aerospace aluminium alloy sheets was determined. Eleven sets of sandblasting parameters were used, which were determined according to a determined experimental plan. The variable factors in the sandblasting process were pressure, nozzle distance, and workpiece displacement speed. The sand jet incidence angle was constant. Garnet 80 E+ was the abrasive material that was used. The joints were made using an epoxy adhesive composition of Epi
APA, Harvard, Vancouver, ISO, and other styles
4

Pamungkas, Wahyu. "PENGARUH JARAK NOZZLE SANDBLASTING BAJA SS400 TERHADAP KETEBALAN COATING DAN LAJU KOROSI." Jurnal Energi Dan Manufaktur 15, no. 2 (2023): 116. http://dx.doi.org/10.24843/jem.2022.v15.i02.p08.

Full text
Abstract:
Logam baja merupakan material utama yang umum digunakan dalam industri hidromekanikal. Jenis logam baja yang banyak digunakan pada industri ini adalah baja karbon rendah, karena baja karbon rendah memiliki keuletan yang tinggi dan mudah machining. Produk hidromekanikal dirancang dengan umur operasi selama 20 hingga 25 tahun. Salah satu faktor keselamatan yang wajib diperhatikan adalah pertumbuhan korosi pada semua bagian struktur produk. Proses terjadinya korosi tidak dapat dihentikan, namun hanya bisa dikendalikan atau diperlambat lajunya. maka dari itu perlu menekan laju korosi serendah mung
APA, Harvard, Vancouver, ISO, and other styles
5

Cheng, Qiangqiang, Bin Zhao, and Chenxi Dong. "Structural Design and Analysis of Hydraulic Sandblasting Perforation Device." Academic Journal of Science and Technology 14, no. 3 (2025): 136–40. https://doi.org/10.54097/ee8pbg59.

Full text
Abstract:
The coalbed methane reservoirs in China are mostly low-permeability reservoirs, which face many difficulties in mining, such as complex fractures, susceptibility to sand blockage, and low support rate. This article designs a new type of hydraulic sandblasting perforation device that integrates hydraulic sandblasting and perforation technology. It adopts a modular structure and includes guiding, adjusting, fixing, perforation, and stabilizing mechanisms. It is suitable for a well diameter of 139.7mm, a maximum outer diameter of 110mm, an inner diameter of 45mm, a total length of 450mm, a nozzle
APA, Harvard, Vancouver, ISO, and other styles
6

Indra, HB, Putri Fenoria, and Riawan Dito. "ANALISA PENGARUH SUDUT DAN WAKTU PENYEMPROTAN TERHADAP UJI KEKASARAN PERMUKAAN MATERIAL BAJA ST 50 PADA PROSES SANDBLASTING." AUSTENIT 10, no. 2 (2018): 51–55. https://doi.org/10.5281/zenodo.4547648.

Full text
Abstract:
Penelitian ini bertujuan untuk mengetahui  pengaruh tekanan udara dan jarak nozzle terhadap kekasaran permukaan baja ST 50 setelah dilakukan proses sandblasting. Analisis ini menggunakan variabel independen yaitu tekanan udara dan jarak nozzle. Variabel dependennya adalah kekasaran permukaan. Sampel penelitian ini adalah baja ST 50. Pengumpulan data dilakukan dengan studi kepustakaan, wawancara, dan observasi. Metode statistik menggunakan Analisis Regresi Linear Berganda, dengan pengujian hipotesis uji statistik t. Hasil penelitian ini menunjukkan bahwa hubungan antara tekanan udara dan j
APA, Harvard, Vancouver, ISO, and other styles
7

Saputra, Indra Adi, Teguh Dwi Widodo, and Lilis Yuliati. "PENGARUH VARIASI SUDUT DAN JARAK PENEMBAKAN SANDBLASTING PADA PROSES PRETREATMENT TERHADAP KUALITAS PELAPISAN CAT DAN SIFAT KOROSI PADA BAJA KARBON RENDAH." Jurnal Rekayasa Mesin 15, no. 1 (2024): 93–102. http://dx.doi.org/10.21776/jrm.v15i1.1382.

Full text
Abstract:
The purpose of this study was to determine the effect of variations in the angle and distance of sandblasting on paint coating quality and corrosion properties of low carbon steel. The success of a coating is highly dependent on surface roughness, so sandblasting is needed to clean and create a surface roughness profile with the aim that the paint can coat the surface perfectly. The test method used in this research is the pull off test method for testing the adhesive strength of paint and open circuit potential (OCP) for testing the corrosion potential. The sandblasting variations used are an
APA, Harvard, Vancouver, ISO, and other styles
8

MATSUYAMA, Kazuhisa, and Nobuo OGAWA. "K-1316 Properties of sandblasting nozzle for micro processing." Proceedings of the JSME annual meeting II.01.1 (2001): 143–44. http://dx.doi.org/10.1299/jsmemecjo.ii.01.1.0_143.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Jientrakul, Ranon, Pornsak Attavanish, Pholchai Chotiprayanakul, Sunpasit Limnararat, and Chumpol Yuangyai. "Variation minimization in tele-sandblasting system: the effect of human-arm movement error." MATEC Web of Conferences 192 (2018): 01052. http://dx.doi.org/10.1051/matecconf/201819201052.

Full text
Abstract:
In tele-sandblasting task, human arm movement is a critical source of producing variation in position of sandblasting nozzle resulting in high operating cost and low productivity. Each operator behaves differently leading to unpredictable movements. Skilled operators are able to reduce the variation; however, developing skills requires a training period. In this paper, we proposed a new approach which is the use of a novel operator's arm movement pattern incorporated with a Kalman filter to reduce the effect of human-arm movement error. A virtual tele-sandblasting system is used to validate ou
APA, Harvard, Vancouver, ISO, and other styles
10

Kıvrım, Abdullah Zekai, Muhammet Bozkurt, and Mehmet Bağcı. "Experimental Investigation of the Effect of Alternative Sandblasting Processes on the Surface Roughness Data of Smooth Rolls." Orclever Proceedings of Research and Development 3, no. 1 (2023): 552–67. http://dx.doi.org/10.56038/oprd.v3i1.393.

Full text
Abstract:
The process of sandblasting is a method applied to remove oil, dirt, rust, and corrosion from metal surfaces, aiming to extend the metal's service life due to the gradual development of rust and corrosion over time. This procedure involves using various abrasive substances, specially manufactured under the name "grit." Sandblasting, similar to sandpaper, not only eliminates visible or micron-sized rust and corrosion on the metal surface but also aims to achieve a specific level of surface roughness. An essential criterion in this process is to texture the surface with appropriate abrasives.&#x
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Sandblasting nozzle"

1

Маценко, І. М. "Розрахункове та експериментальне дослідження технологічних параметрів ежекторно-очисної установки з метою підвищення її ефективності". Master's thesis, Сумський державний університет, 2020. https://essuir.sumdu.edu.ua/handle/123456789/82290.

Full text
Abstract:
У даній роботі проводилося дослідження ежекторно-очисної установки з метою виявлення можливих шляхів по підвищенню ефективності оброблення деталей. В якості ежектора використовується піскоструменеве сопло, від ефективності якого залежить ефективність всієї піскоструменевої установки. У робочому соплі змішуються два потоки: абразивного матеріалу та повітря. Течія абразивної суміші, що проходить через сопло, в даній роботі досліджувалася чисельно та експериментально.<br>В данной работе проводилось исследование эжекторно-очистной установки с целью выявления возможных путей по повышению эффективно
APA, Harvard, Vancouver, ISO, and other styles
2

Мірошніченко, М. О. "Підвищення ефективності технології струменево-абразивного оброблення". Master's thesis, Сумський державний університет, 2020. https://essuir.sumdu.edu.ua/handle/123456789/82291.

Full text
Abstract:
У даній роботі проводилося дослідження ежекторно-очисної установки з метою виявлення можливих шляхів по підвищенню ефективності оброблення деталей. В якості ежектора використовується піскоструменеве сопло, від ефективності якого залежить ефективність всієї піскоструменевої установки. У робочому соплі змішуються два потоки: абразивного матеріалу та повітря. Течія абразивної суміші, що проходить через сопло, в даній роботі досліджувалася чисельно та експериментально.<br>В данной работе проводилось исследование эжекторно-очистной установки с целью выявления возможных путей по повышению эффективно
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Sandblasting nozzle"

1

Sayapov, Ernest, Mathieu Molenaar, Alvaro Nunez, et al. "A State-of-the-Art Approach to Unlock the Potential of Complex Sour Reservoirs in Southern Oman During Global Market Downturn." In SPE International Hydraulic Fracturing Technology Conference & Exhibition. SPE, 2022. http://dx.doi.org/10.2118/205287-ms.

Full text
Abstract:
Abstract Recent years and especially the coronavirus pandemic have been very challenging for the oil industry, resulting in a significant reduction in investment, forcing companies to review budgets and search for more efficient and economical technologies to achieve the target level of hydrocarbon production and revenue generation. In PDO, one of the most challenging fields is "AS", where extreme downhole conditions require a very well-engineered approach to become economical. This field has already seen some of the most advanced technology trials in PDO that are also covered in multiple SPE
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Sandblasting nozzle' for particular source types:
Journal articles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography