Relevant bibliographies by topics / Sawmillls / Dissertations / Theses
To see the other types of publications on this topic, follow the link: Sawmillls.

Dissertations / Theses on the topic 'Sawmillls'

Author: Grafiati
Published: 4 June 2021
Last updated: 14 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 dissertations / theses for your research on the topic 'Sawmillls.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse dissertations / theses on a wide variety of disciplines and organise your bibliography correctly.

1

Lundahl, Carl Gustav. "Optimized processes in sawmills." Licentiate thesis, Luleå : Luleå tekniska universitet/LTU Skellefteå/Träteknologi, 2007. http://epubl.ltu.se/1402-1757/2007/02/LTU-LIC-0702-SE.pdf.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Li, Yanshu Zhang Daowei. "Essays on forestry products industry sawmill productivity and industrial timberland ownership /." Auburn, Ala., 2006. http://repo.lib.auburn.edu/2006%20Spring/doctoral/LI_YANSHU_17.pdf.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Lundahl, Carl Gustav. "Total quality management in sawmills /." Luleå : Division of Wood Science and Technology, LTU Skellefteå, Luleå University of Technology, 2009. http://pure.ltu.se/ws/fbspretrieve/3018479.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Jeffries, Ismail. "Flicker prediction techniques for sawmills." Thesis, Cape Technikon, 2003. http://hdl.handle.net/20.500.11838/1126.

Full text
Abstract:
Thesis (MTech (Electrical Engineering))--Cape Technikon, Cape Town, 2003<br>The aim of the thesis is to investigate and develop a technique for predicting the flicker emission of sawmill loads. The technique makes use of an empirical formula to calculate the characteristic coefficient of a sawmill motor (Ksm) and depends upon the short term flicker severity level (Ps,), load size and fault level.Three types of sawmill loads are commonly found in South Afiican plants, namely the Circular, Multi-rip, and Frame Saws. A sawmill plant was selected as a benchmark and Ksm factors for these types
APA, Harvard, Vancouver, ISO, and other styles
5

Helstad, Klara. "Managing timber procurement in Nordic purchasing sawmills." Doctoral thesis, Växjö : Växjö University Press, 2006. http://urn.kb.se/resolve?urn=urn:nbn:se:vxu:diva-771.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Koehncke, Niels Kevin. "An investigation of noise levels in Alberta sawmills." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 1999. http://www.collectionscanada.ca/obj/s4/f2/dsk1/tape9/PQDD_0019/MQ47051.pdf.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Trask, Keith Matthew. "Management Styles of Lumber Mill Managers in the Northern United States." Fogler Library, University of Maine, 2008. http://www.library.umaine.edu/theses/pdf/TraskKM2008.pdf.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Daniels, Jean M. "An economic assessment of the lumber manufacturing sector in western Washington /." Thesis, Connect to this title online; UW restricted, 2007. http://hdl.handle.net/1773/5456.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Haraldsson, Kjell. "Tradition, regional specialisering och industriell utveckling sågverksindustrin i Gävleborgs län /." Uppsala : Academiae Ubsaliensis : Distribution, Kulturgeografiska institutionen vid Uppsala universitet, 1989. http://catalog.hathitrust.org/api/volumes/oclc/22183323.html.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Yamanaka, Michael Warren. "An investigation of wood dust exposure in Alberta sawmills." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 2000. http://www.collectionscanada.ca/obj/s4/f2/dsk1/tape4/PQDD_0009/MQ59903.pdf.

Full text
APA, Harvard, Vancouver, ISO, and other styles
11

Payne, Christopher James. "Fungal spoilage of kiln dried Sitka spruce at Scottish sawmills." Thesis, University of Aberdeen, 1996. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.320766.

Full text
Abstract:
Within close packed kiln dried Sitka spruce timber a disfiguring sapwood stain, caused by <I>Ophiostoma piceae</I>, frequently developed. Spoilage was investigated through research into nutritional status, moisture content and wettability of Sitka spruce timber, physical conditions within stacks of timber, moisture and nutritional requirements of <I>O. piceae</I> and infection of timber by <I>O. piceae</I>. Recommendations to minimise spoilage of kiln dried timber were made. Carbon and nitrogen compounds abundant in softwood did not result in greater growth than others. Cellulose and lignin we
APA, Harvard, Vancouver, ISO, and other styles
12

Erikshammar, Jarkko. "Supply Chain Integration for Small Sawmills in Industrialized House-Building." Doctoral thesis, Luleå tekniska universitet, Byggkonstruktion och -produktion, 2014. http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-18028.

Full text
Abstract:
The position taken in this thesis is that a small and medium sized supplier makes a strategic choice to integrate their supply chain with industrialized house-building companies in order to deliver customer value and sustain competitive advantage. Customer values for industrialized house-building means delivery reliability, product quality, supply chain and market flexibility. Supply chain integration is the means for understanding customer requirements and to use supply chain resources efficiently through collaboration. The purpose of this thesis is to explore a small sawmill transition from
APA, Harvard, Vancouver, ISO, and other styles
13

Mardikar, Yogesh Mukesh. "Establishing baseline electrical energy consumption in wood processing sawmills a model based on energy analysis and diagnostics /." Morgantown, W. Va. : [West Virginia University Libraries], 2007. https://eidr.wvu.edu/etd/documentdata.eTD?documentid=5412.

Full text
Abstract:
Thesis (Ph. D.)--West Virginia University, 2007.<br>Title from document title page. Document formatted into pages; contains xvi, 222 p. : ill. (some col.). Includes abstract. Includes bibliographical references (p. 203-207).
APA, Harvard, Vancouver, ISO, and other styles
14

Wallace, Robert D. "Improving sawmill residue chip quality." Thesis, This resource online, 1993. http://scholar.lib.vt.edu/theses/available/etd-03242009-040800/.

Full text
APA, Harvard, Vancouver, ISO, and other styles
15

Andersson, Jan-Olof. "Improving energy use in sawmills : from drying kilns to national impact." Licentiate thesis, Luleå tekniska universitet, Energivetenskap, 2012. http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-26713.

Full text
Abstract:
Increased concern about environmental problems has amplified the public`s interest inenergy usage. The improved subsidies for biomass, together with the rising energy priceshave made biomass a desirable product on the energy market. Energy intensive industries inthe field of wood and biomass now have nowadays an opportunity to decrease energyconsumption and to sell their biomass surplus on the energy market.This Licentiate thesis focuses on strategies to decrease biomass usage in sawmill industriesin order to increase their surplus biomass and increase their profit. This is done throughsystem
APA, Harvard, Vancouver, ISO, and other styles
16

Johansson, Mats. "Product Costing for Sawmill Business Management." Doctoral thesis, Växjö : Växjö University Press, 2007. http://urn.kb.se/resolve?urn=urn:nbn:se:vxu:diva-1566.

Full text
APA, Harvard, Vancouver, ISO, and other styles
17

Leary, Pamela S. "Factors affecting sawmill residue chip quality." Thesis, This resource online, 1995. http://scholar.lib.vt.edu/theses/available/etd-06082009-142240/.

Full text
APA, Harvard, Vancouver, ISO, and other styles
18

Fuglesang, Malin. "Assessment of Power Production Possibilities in Two Sawmills in La Palma, Cuba." Thesis, KTH, Kraft- och värmeteknologi, 2012. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-101322.

Full text
Abstract:
The Cuban power sector with its heavy dependency on foreign oil is in much need of investment and development. In the past decade, the Cuban government launched an ‘energy revolution,’ the Revolución energética, which aims at generating electricity from renewable sources. As part of this effort, the country looks toward tapping into its biofuels which mainly consist of bagasse from the sugar industry and wood residues from the forest industry. Against this background, the thesis is a case study of how to use the wood residues from two Cuban sawmills in order to generate electricity. The focus
APA, Harvard, Vancouver, ISO, and other styles
19

Martin, Rebecca. "Particulate Emissions in Selected Maine Saw Mills." Fogler Library, University of Maine, 2008. http://www.library.umaine.edu/theses/pdf/MartinR2008.pdf.

Full text
APA, Harvard, Vancouver, ISO, and other styles
20

Shaik, Asif Ur Rahman, Stefan Vlad, Pascal Rebreyend, and Siril Yella. "Multi-agent simulation of sawmill yard operations." Högskolan Dalarna, Datateknik, 2012. http://urn.kb.se/resolve?urn=urn:nbn:se:du-11791.

Full text
Abstract:
This paper reports the findings of using multi-agent based simulation model to evaluate the sawmill yard operations within a large privately owned sawmill in Sweden, Bergkvist Insjön AB in the current case. Conventional working routines within sawmill yard threaten the overall efficiency and thereby limit the profit margin of sawmill. Deploying dynamic work routines within the sawmill yard is not readily feasible in real time, so discrete event simulation model has been investigated to be able to report optimal work order depending on the situations. Preliminary investigations indicate that th
APA, Harvard, Vancouver, ISO, and other styles
21

Sundholm, Per. "Statistical Process Control for the Sawmill Industry." Thesis, Umeå universitet, Institutionen för fysik, 2015. http://urn.kb.se/resolve?urn=urn:nbn:se:umu:diva-112046.

Full text
Abstract:
In the sawmill industry, it can be very profitable to monitor the dimensions of sawn boards so that operators quickly can detect errors and take cor-rective action. In this master’s thesis project, Statistical Process Control (SPC) methods have been implemented to achieve this. SPC is a set of statistical methods whose purpose is to minimize the variations in an in-dustrial process. In particular, the SPC method used here is the control chart, which with an upper and lower control limit quantifies the bounds of natural variation. To find the most suitable control chart, five control charts monitor
APA, Harvard, Vancouver, ISO, and other styles
22

Sartori, Maurício Scorsatto [UNESP]. "Proposta de otimização para reflorestamento de eucalipto utilizando multiprodutos." Universidade Estadual Paulista (UNESP), 2013. http://hdl.handle.net/11449/106668.

Full text
Abstract:
Made available in DSpace on 2014-06-11T19:35:46Z (GMT). No. of bitstreams: 0 Previous issue date: 2013-05-17Bitstream added on 2014-06-13T19:06:03Z : No. of bitstreams: 1 sartori_ms_dr_botfca.pdf: 399532 bytes, checksum: d83212a1aa6e92a27edaf299ba89ebea (MD5)<br>Este estudo analisa a produção e o retorno econômico de um reflorestamento de Eucalyptus grandis com 12 anos de idade em uma propriedade rural no município de Bofete, estado de São Paulo. O objetivo principal foi comparar o retorno econômico quando se utiliza um mesmo povoamento florestal para diferentes estratégias de comercializaçã
APA, Harvard, Vancouver, ISO, and other styles
23

Sartori, Maurício Scorsatto 1970. "Proposta de otimização para reflorestamento de eucalipto utilizando multiprodutos /." Botucatu, 2013. http://hdl.handle.net/11449/106668.

Full text
Abstract:
Orientador: Magali Ribeiro da Silva<br>Coorientador: Luiz Carlos Faria<br>Banca: Rodrigo de Menezes Trigueiro<br>Banca: Danilo Simões<br>Banca: Luiz Cesar Ribas<br>Banca: Renata Cristina Batista Fonseca<br>Resumo: Este estudo analisa a produção e o retorno econômico de um reflorestamento de Eucalyptus grandis com 12 anos de idade em uma propriedade rural no município de Bofete, estado de São Paulo. O objetivo principal foi comparar o retorno econômico quando se utiliza um mesmo povoamento florestal para diferentes estratégias de comercialização, como de um único produto ou a comercialização de
APA, Harvard, Vancouver, ISO, and other styles
24

Zirnhelt, Damon. "Viability of small firms and economic development, the case of small sawmills in Estonia." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 2000. http://www.collectionscanada.ca/obj/s4/f2/dsk1/tape3/PQDD_0021/MQ57341.pdf.

Full text
APA, Harvard, Vancouver, ISO, and other styles
25

Bowe, Scott Arthur. "Modeling the Adoption Decision Process of Future Scanning and Optimizing Technology in Hardwood Sawmills." Diss., Virginia Tech, 2000. http://hdl.handle.net/10919/27982.

Full text
Abstract:
A nation-wide survey of hardwood sawmills was conducted in the fall of 1999. The objectives of the survey were to determine the differences between adopters and non-adopters of scanning and optimizing technology, identify the company expectations of scanning and optimizing technology, and model the adoption decision process for future scanning and optimizing technology. These objectives were chosen because timely information was not available on the hardwood sawmill industry, and even less was known about the overall state of technology with the industry. The survey consisted of a mail ques
APA, Harvard, Vancouver, ISO, and other styles
26

Madipally, Sunil veer Kumar. "Simulation of Sawmill Yard Operations Using Software Agents." Thesis, Högskolan Dalarna, Datateknik, 2011. http://urn.kb.se/resolve?urn=urn:nbn:se:du-6026.

Full text
Abstract:
Bergkvist insjön AB is a sawmill yard which is capable of producing 350,000 cubic meter of timber every year this requires lot of internal resources. Sawmill operations can be classified as unloading, sorting, storage and production of timber. In the company we have trucks arriving at random they have to be unloaded and sent back at the earliest to avoid queuing up of trucks creating a problem for truck owners. The sawmill yard has to operate with two log stackers that does several tasks including transporting the logs from trucks to measurement station where the logs will be sorted into clas
APA, Harvard, Vancouver, ISO, and other styles
27

Möller, Carl-Johan. "Development of Fingerprint Traceability in a Modern Sawmill." Thesis, Umeå universitet, Institutionen för fysik, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:umu:diva-158235.

Full text
APA, Harvard, Vancouver, ISO, and other styles
28

Bratkovich, Stephen Mark. "Perceived educational needs of innovative Ohio sawmill operators." The Ohio State University, 1991. http://rave.ohiolink.edu/etdc/view?acc_num=osu1334002376.

Full text
APA, Harvard, Vancouver, ISO, and other styles
29

Bratkovich, Stephen. "Perceived educational needs of innovative Ohio Sawmill operators /." The Ohio State University, 1991. http://rave.ohiolink.edu/etdc/view?acc_num=osu1487687959967036.

Full text
APA, Harvard, Vancouver, ISO, and other styles
30

Modesto, Robin M. "Strategic analysis of International Forest Products Limited /." Burnaby B.C. : Simon Fraser University, 2005. http://ir.lib.sfu.ca/handle/1892/3630.

Full text
APA, Harvard, Vancouver, ISO, and other styles
31

Anavberokhai, Isah O. "Environmental Aspects Review : A Case Study of Two Sawmills in Etsako-West, Edo State Nigeria." Thesis, University of Gävle, Department of Technology and Built Environment, 2008. http://urn.kb.se/resolve?urn=urn:nbn:se:hig:diva-716.

Full text
Abstract:
<p>The forests are essential for healthy environment. Trees which are part of the</p><p>forest help to stabilize the forest soil, improve soil fertility, reduce the velocity of</p><p>wind, protect watershed and reduce the amount of carbon released into the</p><p>atmosphere. Many industries use trees as raw materials and in most cases impact</p><p>the environment, but there are great differences in the impact they make. There is</p><p>a need therefore to continually evaluate the operational activities of these</p><p>industries to ensure that the environment is protected. The use of environmenta
APA, Harvard, Vancouver, ISO, and other styles
32

Barroetavena, Maria Cristina. "An epidemiologic investigation of injury mortality among sawmill workers." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 2001. http://www.collectionscanada.ca/obj/s4/f2/dsk3/ftp04/NQ61060.pdf.

Full text
APA, Harvard, Vancouver, ISO, and other styles
33

Berglund, Anders. "Process control and production strategies in the sawmill industry." Licentiate thesis, Luleå tekniska universitet, Träteknologi, 2013. http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-25796.

Full text
Abstract:
The sawmill process itself is not complicated. What makes it complex is thediversity of the raw material, the logs that are processed in the sawmill, and thedivergent production with many different end products. In the sawmill variousnumber of measurement and scanning equipments are installed. These are usedfor controlling the various processes and for measuring how well they are carriedthrough.The main objective of this thesis is to build knowledge of how we can makethe sawing process, one of the main steps within the sawmill process, more efficientwith respect to both volume yield and value
APA, Harvard, Vancouver, ISO, and other styles
34

Chen, Hanchen. "Lung cancer and COPD among sawfilers and those exposed to endotoxin while working in BC sawmills." Thesis, University of British Columbia, 2011. http://hdl.handle.net/2429/36290.

Full text
Abstract:
Background: Sawfilers are a sub-group of sawmill workers who repair and maintain saw blades, and are exposed to multiple inhalable occupational hazards some of which were carcinogens or have non-malignant respiratory effects. Sawmill workers in general may be exposed to endotoxins from gram-negative bacteria of the wood. Previous studies across different industries have shown that endotoxin would increase the risk of COPD, but may decrease the risk of lung cancer. The main goal of this thesis was to examine the associations between the two exposures (sawfiling employment and endotoxin) and two
APA, Harvard, Vancouver, ISO, and other styles
35

Qiu, Zhiquan Frank. "A Simple Machine Vision System for Improving the Edging and Trimming Operations Performed in Hardwood Sawmills." Thesis, Virginia Tech, 1996. http://hdl.handle.net/10919/31144.

Full text
Abstract:
Hardwood timber is a substantial economic staple in the eastern U.S., where primary hardwood processors produce more than 10 billion board feet of sawn hardwoods annually. There are over 3,500 sawmills producing hardwood lumber in the Southeastern portion of the United States. Present trends such as increasing labor costs and limited supplies of high quality logs have forced hardwood lumber manufacturers to increase their efforts to maximize the utilization of this raw material. In order to make money in such a competitive business, these sawmills must produce the highest possible grade of
APA, Harvard, Vancouver, ISO, and other styles
36

Vidlund, Anna. "Sustainable production of bio-energy products in the sawmill industry." Licentiate thesis, KTH, Chemical Engineering and Technology, 2004. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-1734.

Full text
Abstract:
<p>One of the great challenges facing society is to convert theglobal energy system to a sustainable process. Currently, 80%of the world´s energy is supplied through the combustionof fossil fuels. Not only are the fossil resources limited, theutilisation also increases the level of greenhouse gases in theatmosphere. The convertion to a sustainable energy system isproblematic since the technology needed to exploit mostnon-fossil energy sources is not yet fully developed, e.g.solar energy. Biofuel is an available renewable energy sourcewhich is already widely used in many countries. If an effect
APA, Harvard, Vancouver, ISO, and other styles
37

Edelman, John S. "Effects of selected factors on sawmill residue wood chip quality." Thesis, This resource online, 1992. http://scholar.lib.vt.edu/theses/available/etd-03302010-020129/.

Full text
APA, Harvard, Vancouver, ISO, and other styles
38

An, Yuntao. "Coarse-resolution CT scanning for sawmill logs sorting and grading." Thesis, University of British Columbia, 2013. http://hdl.handle.net/2429/45354.

Full text
Abstract:
Significant economic advantage can be achieved by grading logs at the inlet of a sawmill so that they can be optimally processed to manufacture the highest possible value products from the available raw material. At present, log inspection is mainly based on visual observation of surface defects and optical measurement of external features. Such inspection is time-consuming and many quality-controlling features are not visible on the surface, thus very much prone to error. Computed Tomography (CT) has been extensively used as a medical diagnostic tool, and increasingly used for scientific
APA, Harvard, Vancouver, ISO, and other styles
39

Lindner, Berndt Gerald. "Determining optimal primary sawing and ripping machine settings in the wood manufacturing chain." Thesis, Stellenbosch : Stellenbosch University, 2014. http://hdl.handle.net/10019.1/86672.

Full text
Abstract:
Thesis (MEng)--Stellenbosch University, 2014.<br>ENGLISH ABSTRACT: For wood manufacturers around the world, the single biggest cost factor is known to be its raw material. Thus maximum utilisation, specifically volume recovery of this raw material, is of key importance for the industry. The wood products industry consists of several interrelated manufacturing steps for converting trees into logs and logs into finished lumber. At most primary and secondary wood processors the different manufacturing steps are optimised in isolation or based on operator experience. This can lead to subopti
APA, Harvard, Vancouver, ISO, and other styles
40

Thoews, Steven Eric. "The use of simulation as a decision tool for improvements in sawmill manufacturing." Thesis, University of British Columbia, 2008. http://hdl.handle.net/2429/619.

Full text
Abstract:
A simulation study was used to analyze the flow of products though a sawmill in order to determine where productivity improvements could be made. The sawmill analyzed is located in the interior of British Columbia, and processes a variety of species and products. The mill was selected for this reason, as it was important to determine how a change in the process will affect the piece flow and production of the various species. A simulation model of the mill was developed using the Arena 8.0 discrete event simulation software developed by Rockwell Automation. Data consisting of mill layout
APA, Harvard, Vancouver, ISO, and other styles
41

Stokes, George Alvin. "Lumbering in southwest Louisiana a study of the industry as a culturo-geographic factor." Lake Charles, La. : McNeese State University, Frazar Memorial Library, Dept. of Archives and Special Collections, 2007. http://library.mcneese.edu/depts/archive/FTBooks/stokes.htm.

Full text
Abstract:
Thesis (Ph. D.)--Louisiana State University, Dept. of Geography and Anthropology, 1954.<br>Vita. Abstract. HTML version of 1954 doctoral dissertation. Last viewed: 5/8/2008 Includes bibliographical references (leaves 88-92).
APA, Harvard, Vancouver, ISO, and other styles
42

Stevens, James A. "Labor demand and factor substitution in the western Washington sawmill industry /." Thesis, Connect to this title online; UW restricted, 1991. http://hdl.handle.net/1773/5582.

Full text
APA, Harvard, Vancouver, ISO, and other styles
43

Stefan, Vlad. "Discrete Event Simulation of a Sawmill Yard Using Multi-Agent System." Thesis, Högskolan Dalarna, Datateknik, 2011. http://urn.kb.se/resolve?urn=urn:nbn:se:du-29486.

Full text
Abstract:
In direct reference to the saying “time is money”, nowadays scenario simulations play a key role in the tasks people perform. Optimizing the time length of tasks and synchronizing them properly is essential to increased profits in any line of business. In this thesis the Bergkvist-Insjön sawmill yard process will be computer simulated. As the number of trucks arriving at the sawmill is unknown, the unexpected arrival of trucks would produce a high pressure on internal resources and handling operations. The aim of this paper is to optimize the usage of the resources in the Bergkvist-Insjön sawm
APA, Harvard, Vancouver, ISO, and other styles
44

Slider, Chad W. "Window making in America : a study of craftsmen, sawmills, glassworks, and hardware from Jamestown to the Civil War." Virtual Press, 2007. http://liblink.bsu.edu/uhtbin/catkey/1366296.

Full text
Abstract:
Windows are a significant feature of building construction that have largely escaped notice in terms of their design and fabrication in America from the time of European colonization to the mid-nineteenth century. This thesis tells the story of the glass, woodworking, and hardware technologies that transformed windows from hand-crafted to mass-produced building components. It also explores the stylistic, social, and economic factors that underlie the development and usage of windows in America.<br>Department of Architecture
APA, Harvard, Vancouver, ISO, and other styles
45

Laterza, Vito. "Breathing life : labour relations, epistemology and the body among Swazi timber workers." Thesis, University of Cambridge, 2012. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.610563.

Full text
APA, Harvard, Vancouver, ISO, and other styles
46

Höglund, Jonas. "Optimization combined with process mapping for maximizing product utilization : Investigating the utilization of products in sawmills, a case study." Thesis, Mittuniversitetet, Avdelningen för informationssystem och -teknologi, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:miun:diva-34301.

Full text
Abstract:
The handling and utilization of products is an important factor in organization that strive towards and optimal operation, where different methods in the handling of products have a direct effect on the organizations results. This is a case study where a sawmill with a process that is repeated for each new order in the sorting- and packaging of timber. For each scenario, an operator is faced with a decision, where the result of the organization is directly affected by the decision that is made. The decision in question consist of an amount of trays of timber that must be combined in order to m
APA, Harvard, Vancouver, ISO, and other styles
47

Gustafsson, Åsa. "Customers' logistics service requirements and logistics strategies in the Swedish sawmill industry." Doctoral thesis, Växjö universitet, Institutionen för teknik och design, 2006. http://urn.kb.se/resolve?urn=urn:nbn:se:vxu:diva-486.

Full text
Abstract:
The future of the sawmill industry is uncertain; this is partly due to its internal structural changes, but also due to structural changes amongst their customers. Concurrently, competition within the industry is increasing, and therefore focus is constantly being placed on reducing costs and leveraging economies of scale. However, in order for sawmills to benefit from economies of scale, it is necessary to work with a well thought-out logistics strategy. This doctoral dissertation aims at identifying and describing the customers' logistics service requirements as well as describing and analyz
APA, Harvard, Vancouver, ISO, and other styles
48

Persson, Ylva. "Chlorinated organic pollutants in soil and groundwater at chlorophenol-contaminated sawmill sites." Doctoral thesis, Umeå : Department of Chemistry, Umeå University, 2007. http://urn.kb.se/resolve?urn=urn:nbn:se:umu:diva-989.

Full text
APA, Harvard, Vancouver, ISO, and other styles
49

Gustafsson, Åsa. "Customers' logistics service requirements and logistics strategies in the Swedish sawmill industry /." Växjö : Växjö University Press, 2006. http://urn.kb.se/resolve?urn=urn:nbn:se:vxu:diva-486.

Full text
APA, Harvard, Vancouver, ISO, and other styles
50

Holma, H. (Heikki). "Supply chain management and industry cyclicality:a study of the Finnish sawmill industry." Doctoral thesis, University of Oulu, 2006. http://urn.fi/urn:isbn:9514280741.

Full text
Abstract:
Abstract The aim of this study is to deepen current understanding concerning cyclicality in the Finnish sawmill industry. Traditionally, economic actors in the sawmill industry have faced dramatic price and demand fluctuations. Managers often regard cyclicality as natural and unavoidable in the industry. Accordingly, research related to business cycles in the Finnish sawmill industry has consisted of short-term studies that have mainly focused on predicting the turning points of cycles. In contrast to these short-term investigations, this study proffers research on cyclicality that is both emp
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography