Log in

Relevant bibliographies by topics / Screen process printing industry / Journal articles

To see the other types of publications on this topic, follow the link: Screen process printing industry.

Journal articles on the topic 'Screen process printing industry'

Author: Grafiati

Published: 4 June 2021

Last updated: 28 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 journal articles for your research on the topic 'Screen process printing industry.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

Prybeha, Dmytro, Svytlana Smutko, Viktoriya Mitsa, and Anastasia Khrushch. "RESEARCH OF THE TECHNOLOGICAL PROCESS OF SCREEN PRINTING ON TEXTILE AND KNITTING MATERIALS." International Conference on Technics, Technologies and Education, ICTTE 2019 (2019): 336–43. http://dx.doi.org/10.15547/ictte.2019.06.015.

Full text

Abstract:

The aim of the research is to identify the differences in the process of screen printing on textile materials. The equipment, which is used in the process of screen printing on light industry materials, as well as the technological process itself, require the formulation of a number of tasks of analytical and experimental studies. Established that the main differences in the process of screen printing on light industry materials are the stability of materials to high temperatures, their hygroscopicity, adhesion properties of paints and the surface of the material, significant linear deformatio

APA, Harvard, Vancouver, ISO, and other styles

2

Husni, Husni Mubarat, Heri Iswandi, and Bobby Halim. "Pelatihan Industri Kreatif Melalui Sablon Manual Bagi Mahasiswa Desain Komunikasi Visual Uinversitas Indo Global Mandiri Palembang." Lumbung Inovasi: Jurnal Pengabdian kepada Masyarakat 7, no. 4 (2022): 517–27. http://dx.doi.org/10.36312/linov.v7i4.942.

Full text

Abstract:

Pelatihan industri kreatif melalui sablon melibatkan mahasiswa DKV UIGM sebagai mitra pengabdian. Adapun jumlah anggota mitra yang terlibat sebanyak 32 orang mahasiswa. Pelatihan ini berangkat dari permasalahan dasar yaitu masih kurangnya keterampilan yang dimilki oleh mahasiswa DKV tentang sablon kaos manual. Sementara mahasiswa memilki minat yang tinggi untuk dapat menguasai teknik sablon manual sehingga mahasiswa dapat mengekspresikan ide kreatifnya sebagai seorang DKV. Pelatihan ini bertujuan untuk mengenalkan jenis-jenis alat dan bahan sablon (plastisol) agar mahasiswa dapat menguasai tek

APA, Harvard, Vancouver, ISO, and other styles

3

Tobroni, Muhammad Imam. "Teknik Sablon sebagai Media Apresiasi Karya Desain pada Tshirt." Humaniora 2, no. 1 (2011): 169. http://dx.doi.org/10.21512/humaniora.v2i1.2968.

Full text

Abstract:

Screen printing is one of printing techniques. It has its own characteristic and uniqueness in the printing process, so it has customer likeability. Besides as printing media, screen printing is a media to promote and to gather creative ideas in reproduction printing technique. Communication could be understood as message, idea or information delivery process to other people that using specific facilities or equipment to influence or change the receiver’s behavior. T-Shirt as one message delivery media has important part in creative industry. Screen printing technique has different characteris

APA, Harvard, Vancouver, ISO, and other styles

4

Aydemir, Cem, and Samed Ayhan Özsoy. "Environmental impact of printing inks and printing process." Journal of graphic engineering and design 11, no. 2 (2020): 11–17. http://dx.doi.org/10.24867/jged-2020-2-011.

Full text

Abstract:

In the Printing Industry, printing inks, varnishes, lacquers, moistening solutions and washing solvents (ethanol, methyl acetate, ethyl acetate, isopropanol, n-propanol, hexane, benzene, toluene, xylene, isopropyl acetate, propyl acetate, dimethyl ketone, glycols and glycol ethers) contain volatile organic compounds (VOCs) and air pollutants (HAPs). Especially solvent based inks used for flexo, gravure and screen printing, offset printing dampening solutions and cleaning solvents contain high concentration of VOC. These organic compounds evaporate during the production process or contribute to

APA, Harvard, Vancouver, ISO, and other styles

5

Maulana, Jaya, Vina Vindiani, Mohammad Triyanto, and Afif Aditama. "Hazard Identification and Risk Assessment (HIRA) at the Home Batik Sarong Screen Printing Industry in Pekalongan." International Journal of Advanced Technology and Social Sciences 2, no. 5 (2024): 691–702. http://dx.doi.org/10.59890/ijatss.v2i5.1910.

Full text

Abstract:

Home Industry Batik sarong screen printing is one of the economic pillars of the local community with many people involved in business and working in the field of batik. One of them is the Batik Sarong Screen Printing Home Industry in Pekalongan. The screen printing process poses dangers to workers. So it is necessary to evaluate the work environment and identify the risks of the screen printing process. This research aims to determine the conditions of the work environment by applying the Hazard Identification Risk and Assessment (HIRA) method in the process of making screen-printed sarongs.

APA, Harvard, Vancouver, ISO, and other styles

6

Zhang, Gai Mei, Pu Jun Deng, Wen Cai Xu, and Zhi Qiang Yu. "Research on the Quality of Screen Printing Based on the UV Ink." Advanced Materials Research 380 (November 2011): 121–24. http://dx.doi.org/10.4028/www.scientific.net/amr.380.121.

Full text

Abstract:

With the development of the green inks, UV ink has been applicated wider and wider in the printing, packaging and the electronics industry. Based on the UV inks and screen printing process, this paper has investigated the influnce of mesh count, screen ruling, printing materials and ink viscosity on print quality by measuring the printing dot gain experimentally. The results show that the higher mesh count and more smooth printing material can induce the better dot, tone reproduction and higher printing precision. The more serious dot gain and the worse tone reproduction will induced by lower

APA, Harvard, Vancouver, ISO, and other styles

7

Mubarok, Muhamad, and Asep Miftahul Falah. "PERANCANGAN TEKSTIL SUSTAINABLE HOME DECOR MENGGUNAKAN KAIN RAMI DENGAN TEKNIK SCREEN PAINTING." ATRAT: Jurnal Seni Rupa 11, no. 2 (2023): 222–32. http://dx.doi.org/10.26742/atrat.v11i2.3189.

Full text

Abstract:

The growing awareness of sustainability has encouraged the textile industry to seek environmentally friendly solutions in production and product use. One of the natural materials that has attracted attention is hemp cloth, as it has eco-friendly properties and high durability. This study uses screen printing techniques to design sustainable home decor textiles using hemp fabric. This research method involves the stages of selecting raw materials, the process of creating designs, and implementing screen printing techniques on hemp fabrics. First, a qualitative analysis was carried out on the na

APA, Harvard, Vancouver, ISO, and other styles

8

Dwaji, Chamid Nur, and Asep Miftahul Falah. "KAJIAN KRITIK SENI: MAKNA ARTISTIK TOPENG CIREBON PADA PERTUNJUKAN TARI TOPENG CIREBON." ATRAT: Jurnal Seni Rupa 11, no. 2 (2023): 153–65. http://dx.doi.org/10.26742/atrat.v11i2.2849.

Full text

Abstract:

The growing awareness of sustainability has encouraged the textile industry to seek environmentally friendly solutions in production and product use. One of the natural materials that has attracted attention is hemp cloth, as it has eco-friendly properties and high durability. This study uses screen printing techniques to design sustainable home decor textiles using hemp fabric. This research method involves the stages of selecting raw materials, the process of creating designs, and implementing screen printing techniques on hemp fabrics. First, a qualitative analysis was carried out on the na

APA, Harvard, Vancouver, ISO, and other styles

9

Schmidt, Alexander, Nico Wieprecht, Johannes Schlichting, Stefan Denneler, Jörg Franke, and Alexander Kuehl. "Process Development of Screen-Printed Magnetic Sheets for Electric Machines via Statistical Design of Experiments." Metals 13, no. 11 (2023): 1814. http://dx.doi.org/10.3390/met13111814.

Full text

Abstract:

Electrical machines play a major role in achieving a more sustainable economy by driving the further electrification of industry and transportation. To enhance the electric motor productivity during production and the efficiency during operation, it is essential to maximize the material yield rate during the production of stator and rotor sheet stacks and reduce iron losses during operation. Screen-printing technology can help to achieve these goals by producing thin magnetic sheet laminations in near-net-shape geometry, resulting in minimum material waste during production. Moreover, reducing

APA, Harvard, Vancouver, ISO, and other styles

10

Rahayu, Ade Astuti Widi, and Annisa Indah Pratiwi. "Analisis penilaian daur hidup produk screen printing." Operations Excellence: Journal of Applied Industrial Engineering 12, no. 3 (2020): 376. http://dx.doi.org/10.22441/oe.2020.v12.i3.010.

Full text

Abstract:

Increasing consumer concern for environmental sustainability is getting bigger, with the issue of green marketing starting to shift from just as added value to being a priority. The emergence of the green consumer and the growing efforts to protect the environment, encourage the industry to consider the environmental impact caused by each of its activities. Industri screen printing is one of the manufacturing companies located in the Surya Cipta industrial area that produces Screen Printing products. In the process of making Screen Printing with one of the items produced, namely named sheet pa

APA, Harvard, Vancouver, ISO, and other styles

11

Prasetyo, Yuli, Budi Triyono, Dimas Nur Prakoso, and Raden Jasa Kusumo Haryo. "Desain Human Machine Interface (HMI) Pada Sistem Pencetak Genteng Otomatis." Jurnal JEETech 5, no. 1 (2024): 70–78. http://dx.doi.org/10.32492/jeetech.v5i1.5107.

Full text

Abstract:

Roof Tile Printing Machines are important equipment in the industry for printing roof tiles and managing the roof tile production process. This tile printing machine includes a press machine and conveyor that can be adjusted so that the system can operate optimally during production. Operating a tile printing machine requires a program that can control various machine functions, such as conveyor motors and pneumatic cylinders. These programs are generally implemented using a Programmable Logic Controller (PLC). Therefore, an automatic tile printing system based on PLC and HMI with pressure and

APA, Harvard, Vancouver, ISO, and other styles

12

Vandana*1, &. Vikas Jangra2. "ADVANCEMENT IN IMAGE GENERATION SYSTEM OF MAJOR PRINTING PROCESSES." INTERNATIONAL JOURNAL OF ENGINEERING SCIENCES & RESEARCH TECHNOLOGY 7, no. 9 (2018): 318–22. https://doi.org/10.5281/zenodo.3369220.

Full text

Abstract:

Drastic changes have been perceived in every aspect of printing segment since the inception of first printing principle by Johannes Guttenberg in 1440. Afterwards many of printing principles like flexography, offset, gravure and screen printing were emerged and are still in prevalence. Technology has also achieved so many milestones scientifically as well as innovatively especially in last couple of years. So it is being obvious to be blessed with these advancements which helped printing industry in terms of high production rate at brisk pace efficiently and effectively. This paper is aimed to

APA, Harvard, Vancouver, ISO, and other styles

13

Fadhilah, Muhammad, Martanto Martanto, and Irfan Ali. "Prediksi Jumlah Produksi Sablon Tahun Menggunakan Algoritma Regresi Linear di Nolbas SVNR." INTERNAL (Information System Journal) 6, no. 1 (2023): 22–32. http://dx.doi.org/10.32627/internal.v6i1.688.

Full text

Abstract:

Nolbas svnr is a business engaged in the clothing industry which refers more to t-shirt screen printing. This business carries out its activities based on customer orders received through orders from individuals, shops, and schools. With the many types of screen printing that are made, the number of orders received and executed by Nolbas Svnr increases. Screen printing production at Nolbas Svnr is always changing every year. The main objective of this research is to obtain a predictive model for the amount of screen printing production using the Linear Regression method based on the number of

APA, Harvard, Vancouver, ISO, and other styles

14

Cai, Qingyue, Haoyang Yan, Rihui Yao, et al. "From Traditional to Novel Printed Electrochromic Devices: Material, Structure and Device." Membranes 12, no. 11 (2022): 1039. http://dx.doi.org/10.3390/membranes12111039.

Full text

Abstract:

Electrochromic materials have been considered as a new way to achieve energy savings in the building sector due to their potential applications in smart windows, cars, aircrafts, etc. However, the high cost of manufacturing ECDs using the conventional manufacturing methods has limited its commercialization. It is the advantages of low cost as well as resource saving, green environment protection, flexibility and large area production that make printing electronic technology fit for manufacturing electrochromic devices. This paper reviews the progress of research on printed electrochromic devic

APA, Harvard, Vancouver, ISO, and other styles

15

Ntim, Charles K., Sophia P. Ocran, and Richard Acquaye. "Digital Textile Printing: A New Alternative to Short-Run Textile Printing in Ghana." International Journal of Technology and Management Research 2, no. 1 (2020): 60–65. http://dx.doi.org/10.47127/ijtmr.v2i1.51.

Full text

Abstract:

This paper is a part of a broader research into textile design technology and trends across the world and their reflection on the local Ghanaian textile industry. It places conventional manual screen printing and digital textile printing technologies side by side and discusses the various drawbacks of screen printing as against the advantages of digital textile printing to illustrate a path for a wider consideration of the latter in Ghanaian small to medium scale textile production. Short-run textile printing commissions are the main source of jobs for small to medium scale textile producers i

APA, Harvard, Vancouver, ISO, and other styles

16

Yong, Sheng, Meijing Liu, Abiodun Komolafe, John Tudor, and Kai Yang. "Development of a Screen-Printable Carbon Paste to Achieve Washable Conductive Textiles." Textiles 1, no. 3 (2021): 419–32. http://dx.doi.org/10.3390/textiles1030022.

Full text

Abstract:

Conductive tracks are key constituents of wearable electronics and e-textiles, as they form the interconnective links between wearable electrical devices/systems. They are made by coating or printing conductive patterns or tracks on textiles or by weaving, knitting, or embroidering conductive yarns into textiles. Screen printing is a mature and cost-effective fabrication method that is used in the textile industry. It allows a high degree of geometric freedom for the design of conductive patterns or tracks. Current screen-printed conductive textiles have the limitations of low durability when

APA, Harvard, Vancouver, ISO, and other styles

17

Yang, Fang, Wei Su, Li Bei Yao, et al. "Screen-Printing-Based Fabrication of Silver Patterns on Polyimide Substrate." Advanced Materials Research 510 (April 2012): 176–81. http://dx.doi.org/10.4028/www.scientific.net/amr.510.176.

Full text

Abstract:

A simple method for fabricating silver circuit patterns on polyimide (PI) substrate was developed. Firstly, partially potassium hydroxide (KOH) modified pattern was produced on the surface of PI film via a screen printing process. Then the silver ions were doped into the interior of the PI substrate through an ion-exchange reaction. Finally, the silver circuit patterns with the lines of 200 µm width were formed on the PI substrate surface due to the reduction reaction of dimethylamine borane (DMAB). Scanning electron microscopy (SEM), energy dispersive X-ray (EDX) analysis, infrared spectra (F

APA, Harvard, Vancouver, ISO, and other styles

18

Korshunov, G. I., A. A. Petrushevskaya, and P. S. Zaitsev. "ENSURING QUALITY OF INSTALLATION OF PRINTED CIRCUIT BOARDS BASED ON ORGANIZATION OF MACHINE-TO-MACHINE INTERACTION AND 3D-INSPECTION." Issues of radio electronics 1, no. 7 (2019): 35–41. http://dx.doi.org/10.21778/2218-5453-2019-7-35-41.

Full text

Abstract:

The article discusses the application principles of the industry 4.0 concept to improve the basic technological processes of electronics production. The problems of quality assurance in the automatic installation of printed circuit boards. Examples of the introduction optical inspections and fluoroscopy to reduce the marriage are given. The features of screen printing processes and their control using 2D and 3D inspections are considered. The location structure of the automatic optical inspection installations in the automatic line of printed wiring and communication of the automatic screen pr

APA, Harvard, Vancouver, ISO, and other styles

19

Majnarić, Igor, Marko Morić, Dean Valdec, and Katja Milković. "The Effect of Applying UV LED-Cured Varnish to Metalized Printing Elements during Cold Foil Lamination." Coatings 14, no. 5 (2024): 604. http://dx.doi.org/10.3390/coatings14050604.

Full text

Abstract:

The coating process involves applying a thin material layer to a surface to engender it with specific desirable properties or enhance its performance. In the production of print media (labels, packaging, printed textiles, and promotional materials), the standard functions of the coating process include visual decoration, which involves the addition of appealing colors, textures, and patterns. A pertinent issue in the printing industry is that at present, the predominant coating process uses printing and coating technologies (gravure, flexo, letterset, letterpress, screen printing, inkjet, and

APA, Harvard, Vancouver, ISO, and other styles

20

Zbrowski, Andrzej, Tomasz Samborski, and Szymon Zacharski. "Mechatronic Applicator for Dispersion Adhesives." Solid State Phenomena 220-221 (January 2015): 307–12. http://dx.doi.org/10.4028/www.scientific.net/ssp.220-221.307.

Full text

Abstract:

The article presents the operation and structure of a dispersion adhesive applicator dedicated for printing industry. Contrary to the currently used solutions in which the length of the glue layer is defined by the geometry of the glue roller, the original device enables free formation of the relation between the bonding area and adhesive-free areas. Based on the analysis of geometrical and time dependencies characterising the designed device, a mechatronic control system was developed to enable repeated glue application synchronised with the markers commonly used in printing industry and appl

APA, Harvard, Vancouver, ISO, and other styles

21

Hoskins, Stephen, and David Huson. "Underglaze Tissue Printing for Ceramic Artists, a Collaborative Project to Re-Appraise 19th Century Printing Skills." Key Engineering Materials 608 (April 2014): 335–40. http://dx.doi.org/10.4028/www.scientific.net/kem.608.335.

Full text

Abstract:

Under-glaze tissue ceramic transfer printing first developed circa 1750 and involved engraved or etched copper plates, from which tissue was printed with cobalt blue oxides. Under-glaze tissue has a very distinctive, subtle quality - it is an integral part of both English ceramic history and the history of copperplate engraving. The process was common in the UK ceramics industry until the1980s. However from the 1950s it began to be supplemented by screen-printing, because underglaze tissue transfer was relatively slow and required skilled artisans to apply the transfers. The authors are collab

APA, Harvard, Vancouver, ISO, and other styles

22

Choudhary, Ms Monika. "Reducing carbon Footprint and Enhancing Sustainability in Natural Printing Practices via Imprint Technology using Pre-Mordant and Post-Mordant Techniques on Cotton Fabric Printing with Flower and Leaf." INTERNATIONAL JOURNAL OF SCIENTIFIC RESEARCH IN ENGINEERING AND MANAGEMENT 09, no. 04 (2025): 1–9. https://doi.org/10.55041/ijsrem46137.

Full text

Abstract:

Abstract Clothing serves several essential functions, including protection, identification, and adornment. Among the methods used to enhance fabrics, printing techniques play a significant role, while conventional techniques like screen printing and block printing are still commonly used. Recently, eco-printing has emerged as a contemporary and sustainable technique that utilizes plant materials to create unique colors and patterns on textiles. Mordants, particularly a few Natural Mordants are critical in this process as they enhance and improve color quality with changes in the natural pigmen

APA, Harvard, Vancouver, ISO, and other styles

23

Jiang, Xian Feng, Min Fang Han, and Su Ping Peng. "Manufacturing Processes of Solid Oxide Fuel Cell Components." Key Engineering Materials 336-338 (April 2007): 498–501. http://dx.doi.org/10.4028/www.scientific.net/kem.336-338.498.

Full text

Abstract:

The all processes for manufacturing materials parts of solid oxide fuel cell (SOFC) are discussed in the paper. The films are made in one step by the ways of APS, VPS, EVD, which are usually used to produce the electrolyte and interconnect. The films are thin and good gas-resistance, but with relatively high cost. All parts of SOFC are made by the following ways, such as sol-gel, tape casting, tape calendaring and screen printing, which are suitable for manufacturing samples in industry with the cheapest process by co-sintered together ways.

APA, Harvard, Vancouver, ISO, and other styles

24

Jawad, Aod Abdul, and Deajeng Setia Ibu. "Rancangan Alat Bantu Proses Sablon Kaos dengan Pendekatan Ergonomi di Laboratorium Teknik Industri Universitas Pamulang." Jurnal Optimalisasi 11, no. 1 (2025): 44. https://doi.org/10.35308/jopt.v11i1.11627.

Full text

Abstract:

In a company there are several machines and each machine has specifications that can be used for the process of making products where each machine has advantages and disadvantages. The aim of this research is to find out how to design tools that suit the needs of t-shirt screen printing operators using an anthropometric approach and to find out whether the design of these tools can help operators be safer and more comfortable when carrying out the t-shirt screen printing process in the Industrial Engineering Laboratory and this research was carried out in a comprehensive manner. observational

APA, Harvard, Vancouver, ISO, and other styles

25

Cruz, Bruna, Philipp Eschlwech, Michael Hani, and Erwin Biebl. "Characterization of Organic Conductive Materials as an Ecological Solution for RF Applications." Electronic Materials 3, no. 4 (2022): 265–80. http://dx.doi.org/10.3390/electronicmat3040023.

Full text

Abstract:

The use of nonmetallic conductor materials in RF applications has recently become a highlighted issue when it comes to sustainability in the electronics industry, mainly because of the waste problems associated with heavy metals and the necessity of reducing and managing them. The replacement of metal in functional applications such as in electronics is therefore very important. Among these new materials, organic conductors are of great interest since they are, in general, biocompatible and biodegradable, allowing for the disposal of electronic devices, which reduces the negative environment i

APA, Harvard, Vancouver, ISO, and other styles

26

B., Thanashree, and Mariyam Adnan. "Natural Earth Pigments: A Guide to Eco-friendly Textile Dyeing and Printing." Journal of the Textile Association 85, no. 6 (2025): 1–12. https://doi.org/10.63665/jta.v85i6.12.

Full text

Abstract:

This research delves into the utilization of natural earth pigments as sustainable dyes for clothing, exploring their historical significance and unique properties. These pigments, derived from minerals and clays, are biodegradable, non-toxic, and possess cultural significance, unlike synthetic dyes. The chosen material for experimentation is 100% cotton, dyed with natural earth pigments through a garment dyeing process and has also been printed with natural earth pigments through screen printing. Environmental impact assessment test results, confirm the sustainability of natural earth pigment

APA, Harvard, Vancouver, ISO, and other styles

27

Yamaguchi, Mitsugu, Shun Kambayashi, Satoshi Sakamoto, Yasuo Kondo, and Kenji Yamaguchi. "Decorative Film Formation by Inkjet Printing with Gold Nanoparticles for Synthetic Resin Crafts." Key Engineering Materials 825 (October 2019): 51–55. http://dx.doi.org/10.4028/www.scientific.net/kem.825.51.

Full text

Abstract:

The crafts such as lacquerware have made unique strides through decorating techniques using gold such as “Makie”, the technique to draw picture by scattering powdered gold, and “Chinkin”, the technique to rub gold into the design engraved by carving knives. In conventional techniques, practical knowledge and ability are essential to produce craft products. Therefore, screen printing which consists of simple processes has been developed. However, screen printing requires a masking plate made of silk or nylon to create patterns for transcribing ink into objects. This paper presents the formation

APA, Harvard, Vancouver, ISO, and other styles

28

Parvaix, Laura, Pascal Lenormand, Damien Quéré, and Patrick Rozier. "Planar Anode Supported SOFC Fabricated By Sequential Aqueous Tape Casting, Constrained Cosintering and Screen-Printing." ECS Meeting Abstracts MA2022-01, no. 38 (2022): 1680. http://dx.doi.org/10.1149/ma2022-01381680mtgabs.

Full text

Abstract:

Hydrogen technologies and especially fuel cells, are promising alternatives to achieve a carbon-free energy and an ecofriendly transition [1]. The SOFC technology (Solid Oxide Fuel Cell) is an energy conversion system composed of a stack of a porous cathode, a dense electrolyte and a porous anode working at a temperature in the [600°C – 1000°C] range to obtain ionic conductivity above 10-2 S/cm. Nowadays, tape-casting is typically used for mass and low-cost manufacturing of supporting half-cell (8YSZ electrolyte and Ni-YSZ anode) and the cathode layer is commonly deposited by screen-printing [

APA, Harvard, Vancouver, ISO, and other styles

29

Cheng, Yau-Sang, Chi-Keung Li, and Pui-Shing Hung. "Manufacture of Pirated Compact Discs in Hong Kong." Journal of the American Society of Questioned Document Examiners 4, no. 1 (2001): 24–30. https://doi.org/10.69525/jasqde.58.

Full text

Abstract:

Compact discs (CDs) have gained popularity as a recording medium since the early 1980s. Owing to the low production cost and high profit margins, the medium has been a target for pirating by the clandestine “industry.” This paper briefly describes the manufacturing process of a compact disc, and the identification methods used to relate a pirated CD with the stampers, mold heads and printing screens found in the clandestine CD factory. Characteristic defects introduced during the various stages of the production process, namely, the molding, design and printing, all offer excellent potential f

APA, Harvard, Vancouver, ISO, and other styles

30

Istifadhoh, Nurul, Zahida I’tisoma Billah, and Hafidhotul Mufidah. "ANALISIS MAQASHID SYARIAH PADA KOPERASI PRODUSEN SYARIAH INDUSTRI KREATIF DI BOJONEGORO." Jurnal Ekonomika : Manajemen, Akuntansi, dan Perbankan Syari'ah 10, no. 2 (2021): 103–17. http://dx.doi.org/10.24903/je.v10i2.1486.

Full text

Abstract:

Koperasi Produsen Syariah Industri Kreatif is a cooperative sharia which has a role to improve the quality of life member through the efforts of Small and Medium Enterprise (SME). SME that exist in Koperasi Produsen Syariah Industri Kreatif is engaged in the field of industry creative. While maqashid sharia is an Islamic law that has the intent and purpose is important in the life of man, namely obtaining the benefit. Through the concept, among others: 1) the absorption of knowledge and increased education of members; 2) conveying a sense of justice for the community, especially members; 3) th

APA, Harvard, Vancouver, ISO, and other styles

31

Komatsu, Hiroshi. "Low Temperature flip chip bonding technology applicable to flexible hybrid electronics in the IoT era." Additional Conferences (Device Packaging, HiTEC, HiTEN, and CICMT) 2019, DPC (2019): 000474–518. http://dx.doi.org/10.4071/2380-4491-2019-dpc-presentation_tp2_056.

Full text

Abstract:

Since its early days of the industry, electronics apparatus has been in a rigid and flat surfaced case. ICs have been soldered on rigid substrate at high bonding temperature. However, in the IoT era, electronics components connect with the variety of applications which require different forms and shapes of outlook which lead substrate and board should be flexible and complex form. Conventional flip chip bonding technology, such as solder bump and copper pillar, need to raise bonding temperature around 260-degree C, eventually does not satisfy this flexile hybrid electronics (FHE) application r

APA, Harvard, Vancouver, ISO, and other styles

32

Knechtel, Roy, Micaela Wenig, Stefan Svoboda, et al. "Investigation of the Processing Behavior and Stability of Different Glass Frit Materials." ECS Meeting Abstracts MA2023-02, no. 33 (2023): 1618. http://dx.doi.org/10.1149/ma2023-02331618mtgabs.

Full text

Abstract:

Although glass frit bonding has long been a well-established process in the industry, research and development efforts are continuously improving it for application in modern MEMS products. First, it should be mentioned that the main advantage of the glass frit bonding is easily integration of this process module into even the most complex technologies. Using screen printing, the glass frit paste can be applied in a structured manner to one of the two wafers to be bonded, no subsequent structuring (e.g., by lithography and etching) is necessary. Subsequently, the paste is transformed into a co

APA, Harvard, Vancouver, ISO, and other styles

33

Pinćjer, Ivan, Uroš Nedeljković, and Miloš Papić. "Development of FM screens." Journal of Graphic Engineering and Design 3, no. 1 (2012): 1–8. http://dx.doi.org/10.24867/jged-2012-1-001.

Full text

Abstract:

What is a satisfactory quality when it comes to graphic arts industry? Acceptable quality of halftone image is be-come same as photographic picture. There are many different ways in which one can try to reach the desired quality. Different methods of halftoning (lpi and diferent methods of forming halftone dot), scanning, prepress, plate making are just some ways to influence the final printing result. Knowing the advantages and disadvantages of a certain halftoning technique will give us more ability to choose the right process path.

APA, Harvard, Vancouver, ISO, and other styles

34

Nugroho, Iwan Satriyo, Ade Alam Maulana, Muhamad Rizqi Mubharoq, Mochamad Rafi, Nazibul Fuadi, and Saepul Alam. "Analysis of quality control in clothing production using SQC (Statistical Quality Control) and 5W+1H methods." Keynesia : International Journal of Economy and Business 3, no. 2 (2024): 155–66. http://dx.doi.org/10.55904/keynesia.v3i2.1248.

Full text

Abstract:

CV Tujuh Pusaka Tala is a start-up company engaged in the clothing and sports jersey convection industry, as well as marching band musical instruments known by the brands 7MJR Store for clothing and SevenMajor for marching band musical instruments. This study was conducted to analyze the quality control of clothing production at CV. Tujuh Pusaka Tala using the Statistical Quality Control (SQC) method and the 5W and 1H approach to minimize defective products. The SQC methods used include Checksheet, Control Map, Histogram, Pareto Diagram and Cause and Effect Diagram to identify and control vari

APA, Harvard, Vancouver, ISO, and other styles

35

Ney, Linda, Dominic Herbst, Noah Wengenmeyr, et al. "From Catalyst Ink to PEM Fuel Cell Stack: First Full-Size Screen Printed Catalyst Layers Tested within a Generic Stack." ECS Meeting Abstracts MA2024-02, no. 44 (2024): 3031. https://doi.org/10.1149/ma2024-02443031mtgabs.

Full text

Abstract:

The PEM fuel cell industry is currently facing the challenge of upscaling its production, trying to reduce costs, allowing the fuel cell an easier entry in the mobility sector. Therefore, research on developing production processes, increasing throughput rates and quality control along the value chain is of special interest. Often, new materials, which show enhanced performance or durability are developed on very small scale. However, their key properties need to be investigated from a perspective of scalability, starting from catalyst ink to stack-level. Fraunhofer ISE and Center for Solar En

APA, Harvard, Vancouver, ISO, and other styles

36

Wijiastuti, Sri, Zandra Dwanita Widodo, Mrih Rahayu, Muhad Fatoni, and Rissa Marina Widodo. "PELATIHAN KEWIRAUSAHAAN MELALUI INDUSTRI KREATIF PEMBUATAN KAOS BERBASIS SENI CETAK SARING MANUAL DI PONDOK YATIM PIATU ANISSA." SELAPARANG Jurnal Pengabdian Masyarakat Berkemajuan 4, no. 3 (2021): 699. http://dx.doi.org/10.31764/jpmb.v4i3.4839.

Full text

Abstract:

ABSTRAKIstilah kewirausahan milenial enterpreneur baru-baru ini menggeliat di kalangan pelaku dan dunia kewirausahaan UMKM. Kewirausahaan UMKM menjadi bidang garap yang penting bagi perkembangan ekonomi usaha makro, kecil dan menengah seperti tertulis didalam UU no. 20 tahun 2008 tentang Usaha Mikro, Kecil dan Menengah.(Kecil & Menengah, n.d.). Pengabdian ini bertujuan untuk : (1) memberikan wawasan dan pengetahuan kepada anak anak muda yatim piatu usia produktif tentang peluang kewirausahaan yang dapat dilakukan di bidang industri kreatif (2) meningkatkan keterampilan anak muda yatim piat

APA, Harvard, Vancouver, ISO, and other styles

37

Kong, Dexi, Tianling Qin, xiaosong Yu, et al. "62‐2: Novel TFT short‐wave infrared sensor based on colloidal quantum dot technology." SID Symposium Digest of Technical Papers 54, no. 1 (2023): 884–87. http://dx.doi.org/10.1002/sdtp.16706.

Full text

Abstract:

We report a new TFT short‐wave infrared (SWIR) sensor based on colloidal quantum dot (CQD) technology. As the name suggests, its function is to detect and image the short‐wave infrared band. This is an industry‐leading TFT colloidal quantum dot SWIR sensor. The active layer is made of colloidal quantum dot material, and the detection band is 0.9~2.5um. The colloidal quantum dots are interconnected with the TFT reading circuit through spin coating, spraying, screen printing or scraping. The new TFT short‐wave infrared sensor of colloidal quantum dots gets rid of the limitation of the indium col

APA, Harvard, Vancouver, ISO, and other styles

38

Mulyanto, Joko Dwi, Fabriyan Fandi Dwi Imaniawan, Mustofa Mustofa, and Ibnu Alfarobi. "Implementasi Metode Prototype pada Sistem Informasi Pemesanan Kaos Sablon CV Jiyo’g Berbasis Website." Bianglala Informatika 11, no. 1 (2023): 48–52. http://dx.doi.org/10.31294/bi.v11i1.16015.

Full text

Abstract:

Abstrak - Seiring perkembangan teknologi yang semakin pesat sangat mempengaruhi berbagai kehidupan terutama dalam kegiatan bisnis seperti usaha konveksi guna mempertahankan dan bersaing di dalam bisnis yang semakin ketat. CV. Jiyo’g merupakan usaha industri yang bergerak di bidang konveksi yang melayani jasa produksi pakaian khususnya pembuatan kaos sablon yang memprioritaskan kepuasan pelanggan. Padahal CV. Jiyo’g sudah memiliki banyak pelanggan, tetapi saat ini dalam kegiatan bisnis pemesanannya masih belum efektif, dimana pelanggan datang ke toko untuk melakukan pemesanan serta dalam pencat

APA, Harvard, Vancouver, ISO, and other styles

39

Maknun, Salmaa Lu'lu'ul, and Joumil Aidil. "Implementation of Lean Manufacturing Approach Using Value Stream Mapping to Optimize Cycle Time and Reduce Process Waste (Case Study: CV. Teguh Jaya Mandiri)." IJIEM - Indonesian Journal of Industrial Engineering and Management 5, no. 2 (2024): 589. https://doi.org/10.22441/ijiem.v5i2.22440.

Full text

Abstract:

Competition in several service sector companies and the manufacturing industry is getting tighter, which requires service companies as well as manufacturing to increase their production. Solving this problem can be started by improving the company system. Especially in minimizing or eliminating waste from the production process. CV. Teguh Jaya Mandiri is a company engaged in packaging screen printing services, its current condition has obstacles in the processing period that exceeds the time limit and does not match consumer demand. This is because the company has not done a good analysis in c

APA, Harvard, Vancouver, ISO, and other styles

40

Ridwan, Muhamad, Arvita Emarilis Intani, and Rudy Effendi Listyanto. "Analisa Usulan Perbaikan Tata Letak Fasilitas untuk Mengoptimalkan Proses Produksi pada CV. XYZ dengan Metode Systematic Layout Planning." JiTEKH 13, no. 1 (2025): 15–23. https://doi.org/10.35447/jitekh.v13i1.1130.

Full text

Abstract:

An efficient facility layout is crucial for improving productivity and operational efficiency, especially for Small and Medium Enterprises like CV. XYZ, which face space limitations and inefficient material flow. This study aims to redesign the facility layout using the Systematic Layout Planning (SLP) method to optimize material flow, reduce internal transportation, and enhance the competitiveness of CV. XYZ in the screen printing industry. A quantitative descriptive approach was employed, with data collected through observations, interviews, documentation, and literature review. The SLP stag

APA, Harvard, Vancouver, ISO, and other styles

41

DR, BHADRAPPA HARALAYYA. "Employee Engagement at Kharanja Industry Pvt Ltd Humanbad." Iconic Research And Engineering Journals 5, no. 9 (2022): 160–70. https://doi.org/10.5281/zenodo.6348604.

Full text

Abstract:

The demand for paper is very large with increase in population this demand increases greatly the material for the paper industry is cellulose of woody plants and its conversion to paper and its products is the function pulp and paper industry . The tree are non renewable resource, the continuous use of trees for the purpose of papermaking will destroy forest and create environment imbalance, so one has think of alternative ways to minimize the use of trees for the purpose, so comes the ideas of recycling of waste papers to form the paper and paper products, that will minimize nearly 30% to 40%

APA, Harvard, Vancouver, ISO, and other styles

42

Sanson, A., D. Gardini, G. Montanari, C. Galassi, and E. Roncari. "Key role of milling in the optimization of TiO2 nanoinks." Journal of Materials Research 21, no. 6 (2006): 1561–69. http://dx.doi.org/10.1557/jmr.2006.0188.

Full text

Abstract:

Nanostructured films of TiO2 are becoming more and more attractive as a consequence of their improved sensing properties. Screen printing represents an important low-cost alternative for the production of high-performance devices for the automotive industry. However, to obtain films with superior properties, the composition and each step of the ink production must be carefully controlled. Milling strongly influences the rheological properties of the ink and, as a consequence, the quality of the deposited film. The as-prepared ink was homogenized in a four steps-process with a three-roll mill,

APA, Harvard, Vancouver, ISO, and other styles

43

Lehmhus, Dirk, Marco Cen, Adrian Struss, Tim de Rijk, Christoph Pille, and Walter Lang. "Thick Film Sensor Manufacturing Techniques for Realization of Smart Components via Low Pressure Die Casting." Journal of Physics: Conference Series 2692, no. 1 (2024): 012007. http://dx.doi.org/10.1088/1742-6596/2692/1/012007.

Full text

Abstract:

Abstract Recent developments like autonomous driving have increased the interest of the automotive industry in structural health and condition monitoring of safety-relevant components often manufactured via High or Low Pressure Die Casting (HPDC, LPDC). Specifically the latter process is important in this field as the improved quality of castings produced facilitates T6 heat treatments aimed at optimizing mechanical performance of such components. The specific challenge associated with this approach is that it produces critical thermal loads which may compromise the characteristics of the inte

APA, Harvard, Vancouver, ISO, and other styles

44

Menzler, Norbert H., Hans Peter Buchkremer, Johannes Ernst, et al. "Manufacturing of Solid Oxide Fuel Cells - Bridging the Gap from Laboratory to Industry." Materials Science Forum 539-543 (March 2007): 1315–20. http://dx.doi.org/10.4028/www.scientific.net/msf.539-543.1315.

Full text

Abstract:

Due to their direct conversion of electrochemical into electrical energy solid oxide fuel cells (SOFCs) have great potential for a future additional energy supply. Even in the last two years numerous developers of SOFCs, both industry and research institutions, have demonstrated long-term stable operation of stacks of various dimensions (ranging from 1 to 125 kWel, with durations of up to 25000 hours of operation). Besides technical proof, single component availability (cells, bipolar plates, sealing…), stable and low-aging operation, as well as cost efficient manufacturing of the components i

APA, Harvard, Vancouver, ISO, and other styles

45

Supmana, Serly, Rian Prasetyo, and Maria Puspita Sari. "ANALISIS PENGENDALIAN KUALITAS UNTUK MENURUNKAN CACAT PRODUK KAOS JERSEY DENGAN METODE SIX SIGMA DAN RCA DI KONVEKSI X." Inaque : Journal of Industrial and Quality Engineering 12, no. 2 (2025): 153–70. https://doi.org/10.34010/iqe.v12i2.15624.

Full text

Abstract:

Quality control is an important aspect in increasing the efficiency and reliability of production processes in business. This research was conducted at industry X in the textile industry. This research examines t-shirt products because they are the best seller products. In the t-shirt production process at this convection, there is a percentage of product defects in jersey t-shirts of 6.22% which exceeds the convection target. This problem can be detrimental to the convection. The aim of this research is to reduce defects in t-shirt products using the six sigma and RCA methods, with this metho

APA, Harvard, Vancouver, ISO, and other styles

46

Yanagimoto, Hiroshi, Masayuki Nishiyama, Haruki Kondo, Kazuaki Okamoto, Katsuya Houkibara, and Hiroki Sato. "Environmentally-Friendly Electroplating Process Using Solid Electrolyte Membranes." ECS Meeting Abstracts MA2023-01, no. 24 (2023): 1605. http://dx.doi.org/10.1149/ma2023-01241605mtgabs.

Full text

Abstract:

The automobile is a very broad industry, and consists of tens of thousands of parts. Many parts of automobile employ surface treatment to provide several functions such as electronic and anti-corrosion properties. Among several surface treatment process, plating is an important elemental technology for automobile industry. For the industrial perspective, interest in SDGs significantly increases, and efforts to reduce environmental impact are highly urgent. Recently, we have developed novel electroplating process, solid electrodeposition (SED), which is based on ion transfer through solid elect

APA, Harvard, Vancouver, ISO, and other styles

47

Markiewicz-Patkowska, Julita I., Sławomir Pytel, Piotr Oleśniewicz, and Krzysztof Widawski. "THREE-DIMENSIONAL PHOTOGRAPHY AS A NEW TECHNIQUE TO MAKE DIDACTIC PRESENTATIONS MORE ATTRACTIVE." Information Technologies and Learning Tools 69, no. 1 (2019): 1. http://dx.doi.org/10.33407/itlt.v69i1.2720.

Full text

Abstract:

In the 21st century, the form of presenting information plays an incredibly important role in arousing interest in research problems. Stereoscopy is among the imaging techniques that have evoked much interest in the recent years. Its numerous applications that can be observed in various fields (such as medicine, space science, law, marketing, or entertainment industry) suggest that we should also use this technology for didactic purposes. The aim of the article is to discuss the process of creating three-dimensional photography and the opportunities offered by stereoscopy, which makes it possi

APA, Harvard, Vancouver, ISO, and other styles

48

Shelekhov, Igor Yu. "Description of a New Methodology for Baking Products from Wheat and Rye Flour by the Sour Dough Method." Engineering Technologies and Systems 31, no. 2 (2021): 291–303. http://dx.doi.org/10.15507/2658-4123.031.202102.291-303.

Full text

Abstract:

Introduction. The article presents the results of a study of using various methods for thermal processing of bakery products. It is shown that the infrared method is one of the most promising methods of heat treatment. The analysis showed that when combining different methods of heat treatment, the products retain their consumer qualities and the time of the technological cycle is reduced. The author proposes to use the method of thermal processing in the fast food industry. Materials and Methods. The subject of the study is a new method of thermal processing of bakery products made from wheat

APA, Harvard, Vancouver, ISO, and other styles

49

Lim, Yonghyun, Hojae Lee, Junghum Park, et al. "(Invited) A Novel, Ultra-Fast Fabrication of SOFCs By Flash Light Sintering Process." ECS Meeting Abstracts MA2022-02, no. 47 (2022): 1740. http://dx.doi.org/10.1149/ma2022-02471740mtgabs.

Full text

Abstract:

Solid oxide fuel cells (SOFCs) have strong potential for next-generation energy conversion systems because of their high energy conversion efficiency, fuel flexibility and low emission of pollutant. In the last decades, the SOFC technology has rapid progress in terms of performance and durability aspect, expanding its application ranges from stationary system to portable devices. In the fabrication of SOFCs, a simple and mass productive fabrication process such as screen-printing, tape casting and sol-gel method are widely used in the industry because it is easy, scalable and economical proces

APA, Harvard, Vancouver, ISO, and other styles

50

Oppert, Thomas, Rainer Dohle, Jörg Franke та Stefan Härter. "Wafer Level Solder Bumping and Flip Chip Assembly with Solder Balls Down to 30μm". International Symposium on Microelectronics 2011, № 1 (2011): 000953–60. http://dx.doi.org/10.4071/isom-2011-tha3-paper1.

Full text

Abstract:

The most important technology driver in the electronics industry is miniaturization mainly driven by size reduction on wafer level and cost. One of the interconnection technologies for fine pitch applications with the potential for highest integration and cost savings is Flip Chip technology. The commonly used method of generating fine pitch solder bumps is by electroplating the solder. This process is difficult to control or even impossible if it comes to ternary or quaternary alloys. The work described in this study addresses the limitations of existing bumping technologies by enabling low-c

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!