Relevant bibliographies by topics / Selection of compressors

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Selection of compressors'

Author: Grafiati
Published: 28 May 2022
Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Selection of compressors.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Selection of compressors"

1

Tsutsumi, S., and J. Boone. "The Design, Selection, and Application of Oil-Injected Screw Compressors for Fuel Gas Service." Journal of Engineering for Gas Turbines and Power 117, no. 1 (1995): 81–87. http://dx.doi.org/10.1115/1.2812785.

Full text
Abstract:
Fuel gas compressors installed in cogeneration systems must be highly reliable and efficient machines, like the other main components, such as gas turbines, gas engines, etc. In the range of gas flow rate and pressure conditions generally required for such systems, the oil-injected screw compressor is often the most suitable compressor type for these requirements. Advantages of oil injected screw compressors are: improved compression efficiency; low discharge gas temperature; high reliability; simple mechanical construction; which all result from injection of lubricant into the compressor. Inj
APA, Harvard, Vancouver, ISO, and other styles
2

Gao, Jian Qiang, Shao Dong Sun, Li Kun Wang, and Ning Wang. "The Analysis on the Scheme of the Flue Gas Compressor of a 300 MW Oxy-Fuel Pulverized Coal Fired Boiler." Applied Mechanics and Materials 602-605 (August 2014): 638–41. http://dx.doi.org/10.4028/www.scientific.net/amm.602-605.638.

Full text
Abstract:
The compression of the flue gas is one of the most critical processes of CO2 recycling in oxy-fuel combustion technology. With a 300 MW Oxy-fuel pulverized coal fired boiler taken as an example of study, the selection of compressors of its flue gas compressing system is analyzed by the thermodynamic calculation. In this paper, two centrifugal compressors with the same specification are in parallel running as Scheme 1 of selection, while an axial compressor and a piston compressor are in series operation as Scheme 2 of selection. It shows that the Scheme 2 has the advantage of the energy consum
APA, Harvard, Vancouver, ISO, and other styles
3

Yu Dong, Xu, Li Cong, Lv Qiong Ying, Zhang Xin Ming, and Mu Guo Zhen. "The influence of the trailing edge angle of the micro centrifugal impeller on the performance of the centrifugal compressor." International Journal of Applied Electromagnetics and Mechanics 66, no. 4 (2021): 619–33. http://dx.doi.org/10.3233/jae-201590.

Full text
Abstract:
In order to study the effect of the trailing edge sweep angle of the centrifugal impeller on the aerodynamic performance of the centrifugal compressor, 6 groups of centrifugal impellers with different bending angles and 5 groups of different inclination angles were designed to achieve different impeller blade trailing edge angle. The computational fluid dynamics (CFD) method was used to simulate and analyze the flow field of centrifugal compressors with different blade shapes under design conditions. The research results show that for transonic micro centrifugal compressors, changing the blade
APA, Harvard, Vancouver, ISO, and other styles
4

Brusyanin, Dmitry, Andrey Ivanov, and Andrey Sedov. "SELECTION OF THE OPTIMAL AIR COMPRESSOR MODEL FOR USE IN THE DEPARTMENTS OF EMERCOM OF RUSSIA BY THE METHOD OF EXPERT ASSESSMENT OF TECHNICAL PARAMETERS." NATURAL AND MAN-MADE RISKS (PHYSICO-MATHEMATICAL AND APPLIED ASPECTS) 2024, no. 2 (2024): 31–38. http://dx.doi.org/10.61260/2307-7476-2024-2-31-38.

Full text
Abstract:
For smooth operation, as well as effective and safe maintenance and repair of fire trucks, air compressors are used in fire and rescue units of the federal fire service of the State fire service of EMERCOM of Russia. The air piston compressor allows you to create the necessary air flow pressure for the operation of the pneumatic tool. Therefore, an urgent issue is the choice of a compressor model with optimal parameters. The paper evaluates the technical parameters of compressors by the method of expert evaluation. Based on the results of the assessment, the most significant parameters affecti
APA, Harvard, Vancouver, ISO, and other styles
5

Lebedev, A. A., A. A. Aksenov, S. M. Lebedeva, A. Yu Petrov, and Minh Hai Nguyen. "Improving the reliability of the compressor unit using the wavelet transform method." E3S Web of Conferences 140 (2019): 05013. http://dx.doi.org/10.1051/e3sconf/201914005013.

Full text
Abstract:
Centrifugal compressors are an integral part of modern production in such industries as gas transmission, oil refining, metallurgical, machine-building, mining, as well as in electric and heat power engineering. Interruptions in the operation or failures of compressors lead to decrease in profit or large material loss. Conditions should be created for the safe (stable) operation of centrifugal compressors. Surge is global (complete) loss of stability, an unacceptable phenomenon for a centrifugal compressor. Compressor surge protection must function during operation. The algorithms used to prot
APA, Harvard, Vancouver, ISO, and other styles
6

Kalamkar, Anand. "How to Improve Fatigue Life and Residual Stress in Compressor Reeds through Shot Peening." International Journal for Research in Applied Science and Engineering Technology, no. 6 (June 30, 2024): 164–67. http://dx.doi.org/10.22214/ijraset.2024.63004.

Full text
Abstract:
Abstract: Numerous industrial areas involve the utilization of shot peening as a well-known surface enhancement method for increasing the fatigue life and residual stress of cyclically loaded crucial parts. This study examines the effects of shot peening on compressor reeds that can lengthen their life cycle with an accelerated rate of residual stress thereby improving reliability and performance of entire compressor system. The paper explains the principles behind shot peening, its influence on materials, and some specific advantages that it gives to thin reed compressors. Materials selection
APA, Harvard, Vancouver, ISO, and other styles
7

Rohan, Bhalekar, and Gujar A. "A Comprehensive Study on Compressors Used in Vapor Compression Refrigeration Cycles." Recent Trends in Thermodynamics and Thermal Energy System 1, no. 1 (2025): 10–14. https://doi.org/10.5281/zenodo.15260642.

Full text
Abstract:
<em>The vapor compression cycle (VCC) is a widely used refrigeration and air conditioning process, critical to various industries and domestic applications. The compressor is a central component of the VCC, responsible for increasing the pressure and temperature of the refrigerant vapor, thereby enabling the thermodynamic cycle. This paper presents a comprehensive study on different types of compressors used in VCCs, their working principles, design considerations, efficiency characteristics, recent technological advancements, and comparative performance analysis. Emphasis is placed on recipro
APA, Harvard, Vancouver, ISO, and other styles
8

Kosuri, Lakshmi Thirumala, M. Deepika Krishna, Adilakshmi i. Karapat, B. S. B. Ayyappa Swamy, and Dinesh Nayak S. "A Low Power High Speed Accuracy Controllable Approximate Multiplier Design." International Journal for Research in Applied Science and Engineering Technology 10, no. 4 (2022): 1625–30. http://dx.doi.org/10.22214/ijraset.2022.41617.

Full text
Abstract:
Abstract: For energy effective and high performance design, the low power VLSI circuit is used. Multiplier is an essential part of low power VLSI design, since the effectiveness of the digital signal processor depends upon the multiplier. In multiplier circuit, utmost of the power is dissipated across in full adder circuits. Multiplication is one of the important process in microprocessor and there will be a lot of delay because of array multiplier, which can be compressed with the help of the column compressor approach. It uses a selection of half adders, full adders and compressors to sum th
APA, Harvard, Vancouver, ISO, and other styles
9

Ryabko, Boris. "Time-Universal Data Compression." Algorithms 12, no. 6 (2019): 116. http://dx.doi.org/10.3390/a12060116.

Full text
Abstract:
Nowadays, a variety of data-compressors (or archivers) is available, each of which has its merits, and it is impossible to single out the best ones. Thus, one faces the problem of choosing the best method to compress a given file, and this problem is more important the larger is the file. It seems natural to try all the compressors and then choose the one that gives the shortest compressed file, then transfer (or store) the index number of the best compressor (it requires log m bits, if m is the number of compressors available) and the compressed file. The only problem is the time, which essen
APA, Harvard, Vancouver, ISO, and other styles
10

Raju, Panchal. "Design and Performance Evaluation of a Low-Cost Compressor for Cooling Applications." Recent Trends in Thermodynamics and Thermal Energy System 1, no. 1 (2025): 5–9. https://doi.org/10.5281/zenodo.15240986.

Full text
Abstract:
<em>The demand for energy-efficient and cost-effective refrigeration and cooling solutions has led to significant interest in the development of low-cost compressors. This research investigates the design and performance of a low-cost compressor specifically tailored for cooling applications. The study focuses on key factors such as material selection, energy efficiency, and ease of manufacturing, with an emphasis on reducing production costs while maintaining an acceptable level of cooling performance. A comparative analysis with traditional compressors reveals potential trade-offs in terms o
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Selection of compressors"

1

Олійник, Я. О. "Проєктування стаціонарної азотно-мембранної компресорної станції". Master's thesis, Сумський державний університет, 2021. https://essuir.sumdu.edu.ua/handle/123456789/86611.

Full text
Abstract:
У роботі виконано розрахунок стаціонарної азотної мембранної станції, а саме підбір та розрахунок гвинтових компресорів, сепаратора та фільтра. Потім виконано розрахунок потреби в стисненому азоті по трьом гілкам, які відрізняються чистотою кінцевого продукту. В результаті аналізу використання різної кількості компресорів для потреб стиснення азоту, виконано вибір найбільш оптимального варіанту. У розділі охорони праці виконано аналіз шкідливих та небезпечних факторів при експлуатації гвинтових компресорів.<br>В работе выполнен расчет стационарной азотной мембранной станции, а именно подбор и
APA, Harvard, Vancouver, ISO, and other styles
2

Holmberg, Henrik. "Towards Automatic and Systematic Compressor Model Selection Based on Measurement Data." Thesis, Linköpings universitet, Fordonssystem, 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-178104.

Full text
Abstract:
Centrifugal compressors are mechanical devices that move and compress gas and are used in a wide range of applications. To get as much efficiency out of the compressors as possible, high demandsare put on having good compressor models. One method of compressor modeling is the curve fitting method, where empirical and mathematical models are used to parameterize relationships between different compressor characteristics. The models come in a vast variety of formats, complexity and difficulty of applying them. With the variety of compressors and models to select from, it is important to select a
APA, Harvard, Vancouver, ISO, and other styles
3

Якимів, Д. С. "Дослідження одноступеневої холодильної машини з різними типами компресорів". Master's thesis, Сумський державний університет, 2021. https://essuir.sumdu.edu.ua/handle/123456789/86616.

Full text
Abstract:
У роботі виконано розрахунок параметрів у вузлових точках циклу одноступеневої холодильної машини, в результаті чого визначено необхідну продуктивність компресора. Потім виконано порівняльний аналіз поршневого, гвинтового та спірального компресорів за загальноприйнятою методикою та за допомогою програмного забезпечення компанії Bitzer. За результатами розрахунку і аналізу виконано підбір компресора, який найбільше задовольняє вимогам. У розділі охорони праці виконано аналіз шкідливих та небезпечних факторів при експлуатації холодильного обладнання та виконано розрахунок природного та штучного
APA, Harvard, Vancouver, ISO, and other styles
4

Wolfram, Kyle Martin. "Characterization of air to fuel ratio control and non-selective catalytic reduction on an integral compressor engine." Thesis, Manhattan, Kan. : Kansas State University, 2008. http://hdl.handle.net/2097/742.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Venter, Johan. "Development of a dynamic centrifugal compressor selector for large compressed air networks in the mining industry / Johan Venter." Thesis, North-West University, 2012. http://hdl.handle.net/10394/9540.

Full text
Abstract:
Various commercial software packages are available for simulating compressed air network operations. However, none of these software packages are able to dynamically prioritise compressor selection on large compressed air networks in the mining industry. In this dissertation, a dynamic compressor selector (DCS) will be developed that will actively and continuously monitor system demand. The software will ensure that the most suitable compressors, based on efficiency and position in the compressed air network, are always in operation. The study will be conducted at a platinum mine. Compressed a
APA, Harvard, Vancouver, ISO, and other styles
6

Tipton, Russell C. "Simulation of a storage freezer operating with a binary nonazeotropic refrigerant blend part I. equation of state cycle selection compressor model and air-cooled condenser model." Ohio : Ohio University, 1989. http://www.ohiolink.edu/etd/view.cgi?ohiou1182524272.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Лавриненко, О. С. "Вибір та проектування компресорної машини об’ємного принципу дії для системи холодопостачання". Master's thesis, Сумський державний університет, 2019. http://essuir.sumdu.edu.ua/handle/123456789/76506.

Full text
Abstract:
Розділ 1 "Спеціальний розділ": розрахунок ротаційно-пластинчастого компресора, розрахунок поршневого компресора, розрахунок гвинтового компресора, розрахунок спірального компресора, порівняльний аналіз різних типів компресорів, визначення витрати газу через зазори спірального компресора; розділ 2 «Охорона праці та безпека у надзвичайних ситуаціях»: небезпечні і шкідливі фактори компресорного виробництва, розрахунок захисного заземлення електроприводу, розрахунок хімічної обстановки на об'єкті у зв’язку з аварією на прилеглій залізничній станції, що призвела до руйнування ємності з аміаком; роз
APA, Harvard, Vancouver, ISO, and other styles
8

Wu, Hui-Chun, and 吳慧君. "Best Selection of Refrigerant Compressor with HFC-245fa." Thesis, 2013. http://ndltd.ncl.edu.tw/handle/ub4vrn.

Full text
Abstract:
碩士<br>國立臺北科技大學<br>能源與冷凍空調工程系碩士班<br>101<br>The study intends to select from the market a compressor that meets the operation specifications of HFC-245fa refrigerant, and use the compressor to achieve effectiveness of HFC-245fa. After experiments are conducted, the study employs theoretical analysis and actual compression system to compare the difference among refrigerating and heating capacities, COPL and COPH under different evaporation temperatures and condensing temperatures. Research results show that HFC-134a refrigerant is most similar to HFC-245fa refrigerant. The study conducts actua
APA, Harvard, Vancouver, ISO, and other styles
9

Van, Tonder Adriaan Jacobus Marthinus. "Automation of compressor networks through a dynamic control system / Adriaan Jacobus Marthinus van Tonder." Thesis, 2014. http://hdl.handle.net/10394/15723.

Full text
Abstract:
Compressed air makes up an important part of South African precious metal mining processes. Rising operational costs in the struggling mining sector increased the interest of the power utility, Eskom, and mine management in achievable electrical energy savings. Demand side management initiatives, funded by Eskom, realised a significant improvement in electrical energy efficiency of compressed air networks. Supply side interventions further aided optimisation by lowering operational costs. Previous research identified the need for integrating compressed air supply and demand side initiatives. A
APA, Harvard, Vancouver, ISO, and other styles
10

Van, Niekerk Mattheus Hendrikus Pieters. "The implementation of a dynamic air compressor selector system in mines / Mattheus Hendrikus Pieters van Niekerk." Thesis, 2015. http://hdl.handle.net/10394/15714.

Full text
Abstract:
The generation of compressed air comprises 20% of the total electricity usage in the mining industry, although compressed air is often seen as a free source of energy. There are however significant costs associated with generating compressed air and maintaining a compressed air system. There are several methods to optimise the electricity used to generate compressed air. The focus of this study is on one of these methods – the implementation of a dynamic air compressor selector. A Dynamic Compressor Selector (DCS) system was developed to fulfil this purpose. DCS is a system that combines deman
APA, Harvard, Vancouver, ISO, and other styles

Books on the topic "Selection of compressors"

1

Brown, Royce N. Compressors, selection & sizing. Gulf Pub. Co., 1986.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Gresh, M. Theodore. Compressor performance: Selection,operation, and testing of axial and centrifugal compressors. Butterworth-Heinemann, 1991.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Institution of Mechanical Engineers. Fluid Machinery Committee. and Energy Efficiency Best Practice Programme., eds. Design, selection, and operation of refrigerator and heat pump compressors: Achieving economic cost and energy efficiency, 26 November 1998, IMechE Headquarters, London, UK. Professional Engineering Pub. for the Institution of Mechanical Engineers, 1998.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Institution of Mechanical Engineers. Fluid Machinery Committee. and Energy Efficiency Best Practice Programme., eds. Design, selection, and operation of refrigerator and heat pump compressors: Achieving economic cost and energy efficiency : [proceedings of a seminar held on] 26 November 1998, [at] IMechE Headquarters, London, UK. Professional Engineering, for the Institution of Mechanical Engineers, 1998.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Compressors: Selection and sizing. 3rd ed. Elsevier, 2005.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Compressors: Selection and sizing. 2nd ed. Gulf Pub., 1997.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Brown, Royce N. Compressors: Selection and Sizing. Elsevier Science & Technology Books, 1997.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Brown, Royce N. Compressors: Selection and Sizing. Elsevier Science & Technology Books, 2011.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Compressor performance: Selection, operation, and testing of axial and centrifugal compressors. 2nd ed. Butterworth-Heinemann, 2001.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Midgley, David H. Centrifugal Compressor and Pump Selection. McGraw-Hill Education, 2013.

Find full text
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Selection of compressors"

1

Fuerst, Joel. "Selection of Cold Compressors for the Fermilab Tevatron." In Advances in Cryogenic Engineering. Springer US, 1994. http://dx.doi.org/10.1007/978-1-4615-2522-6_104.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Rozhkov, K. E., I. A. Krivosheev, and N. B. Simonov. "Selection of Incidence Angle at Designing Blade Row of Compressors and Turbines." In Proceedings of the 4th International Conference on Industrial Engineering. Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-95630-5_21.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Unnikrishnan, G., and V. Pratapkumar. "When Compressor Selection Went Wrong." In Front End Engineering Design of Oil and Gas Projects: Critical Factors for Project Success. CRC Press, 2023. http://dx.doi.org/10.1201/9781003317081-14.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Watanabe, Fumi, and Atsushi Akisawa. "Selection of Adsorbents for Double-Effect Adsorption Refrigeration Cycle Combined Compressor." In Transition Towards 100% Renewable Energy. Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-69844-1_41.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Karnaz, Joe. "Compressor Designs, Lubricant Options and Refrigerant Selections: Putting the Puzzle Together." In Springer Proceedings in Energy. Springer Nature Switzerland, 2024. http://dx.doi.org/10.1007/978-3-031-42663-6_69.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Dahl, Trygve. "Optimizing Pump and Compressor Selection for Energy Efficiency Using True-Weighted Efficiency (TWE)." In Springer Proceedings in Energy. Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-69799-0_52.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Krivosheev, I. A., N. B. Simonov, and K. E. Rozhkov. "A Method of Selecting the Number of Stages and the Allocation of Works to Those in Compressor Design." In Lecture Notes in Mechanical Engineering. Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-54814-8_73.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Guo, Boyun, Yingfeng Meng, and Na Wei. "Selection of gas compressors." In Applied Gaseous Fluid Drilling Engineering. Elsevier, 2022. http://dx.doi.org/10.1016/b978-0-323-85675-1.00004-8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Baker, B. S. "Fifty years ago: ‘A new portable hand operated external cardiac compressor’." In Why I Became an Occupational Physician and Other Occupational Health Stories. Oxford University Press, 2020. http://dx.doi.org/10.1093/med/9780198862543.003.0105.

Full text
Abstract:
This series provides a selection of articles from the past. In Fifty years ago: A new portable hand operated external cardiac compressor B.S. Baker briefly explores the merits of the portable hand-operated external cardiac compressors that allowed the user to resuscitate patients in hazardous conditions such as mines or fires.
APA, Harvard, Vancouver, ISO, and other styles
10

"What Role the Compression Ratio Plays in Compressor Design and Selection." In Operator's Guide to Process Compressors. John Wiley & Sons, Inc., 2019. http://dx.doi.org/10.1002/9781119581383.ch4.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Selection of compressors"

1

Mekidiche, Zinet, Juan A. Labarta, and Jos� A. Caballero. "Optimizing Heat Recovery: Advanced Design of Integrated Heat Exchanger Networks with ORCs and Heat Pumps." In The 35th European Symposium on Computer Aided Process Engineering. PSE Press, 2025. https://doi.org/10.69997/sct.155956.

Full text
Abstract:
A comprehensive model has been developed to design heat exchanger networks integrated with organic Rankine cycles (ORCs) and heat pumps, aiming to optimize energy efficiency. The model focuses on two key objectives: first, using heat pumps to reduce dependency on external services by enhancing heat recovery within the system; second, utilizing ORCs to recover residual heat or generate additional energy. To achieve optimal performance, the model requires careful selection of fluids for both ORCs and heat pumps, and the determination of optimal operating temperatures for maximum efficiency. The
APA, Harvard, Vancouver, ISO, and other styles
2

Soldevila, J., J. Genescá, and V. N. Nouel. "Practical Experience with Buried Stainless Steel Pipelines." In CORROSION 2002. NACE International, 2002. https://doi.org/10.5006/c2002-02090.

Full text
Abstract:
Abstract There is little experience of buried Stainless Steel (SS), thus the available technical literature is very scarce, but with some cases indicating premature failures of this type of installations. A general view of factors influencing SS corrosion is presented. The case of buried SS pipes in service stations for natural vehicle gas in Venezuela, where the pipes were connected without isolation to compressors and terminate in manholes at the foot of the gas dispensers is discussed. Structure to soil potential readings are presented, indicating presence of different bimetallic pairs betw
APA, Harvard, Vancouver, ISO, and other styles
3

Soundararajan, Sudharsanan. "885°F Embrittlement of Super Duplex Stainless Steel Impeller in Hot Off Gas Blower." In CONFERENCE 2025. AMPP, 2025. https://doi.org/10.5006/c2025-00466.

Full text
Abstract:
Abstract During Start-up of Hot off Gas blower, catastrophic brittle fracture was observed on the final stage impeller of 4 stage Hot off gas blower. The metallurgy of the impeller is Super Duplex stainless Steel (UNS S32750) and the 4th stage of the blower was continuously operated above 325°C (615°F). Metallurgical failure analysis was carried out using Optical Microscopy, Chemical Composition analysis, Ferrite measurement, Hardness measurement, Impact test and Fractography analysis by Scanning Electron Microscopy. In Microstructure analysis no abnormalities in the Ferrite/austenite balance
APA, Harvard, Vancouver, ISO, and other styles
4

Sun, Ying, and Yufei Tan. "Intelligent Model Selection for Refrigerating Compressors." In 2011 3rd International Workshop on Intelligent Systems and Applications (ISA). IEEE, 2011. http://dx.doi.org/10.1109/isa.2011.5873441.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Sayyed, S. "Selection of High Performance Low Flow Compressors." In ASME 1986 International Gas Turbine Conference and Exhibit. American Society of Mechanical Engineers, 1986. http://dx.doi.org/10.1115/86-gt-220.

Full text
Abstract:
With rapidly escallating energy costs, the need to use energy as efficiently and economically as possible has led to new development programs particularly in the low flow areas. New techniques in the design of impellers as well as stationary flow passages have been developed to produce highly efficient compression stages, and at the same time calculation methods to accurately predict the aerodynamic performance for low flow applications are being continually upgraded to provide a reliable and efficient machine to be employed in the emerging applications. This paper provides some of the insight
APA, Harvard, Vancouver, ISO, and other styles
6

Pazzi, Simone, Marco Giachi, Ashraf Al Musleh, Massimo Pusceddu, and Nidal Ghizawi. "An Advanced Optimization Procedure for the Thermodynamic Selection of Centrifugal Compressors Stages." In ASME Turbo Expo 2008: Power for Land, Sea, and Air. ASMEDC, 2008. http://dx.doi.org/10.1115/gt2008-50702.

Full text
Abstract:
The present paper deals with the application of optimization algorithms to the selection of centrifugal stages for industrial compressors. The optimization procedure has been developed allowing an automatic stage selection to meet a mathematically stated target including the most relevant performance parameters and machine operating and size constraints. The thermodynamic selection is assessed by means of an internal-use CCS (Centrifugal Compressors Selector) that computes compressor flange-to-flange performance with a given sequence of stages. The CCS has been coupled to an internally used op
APA, Harvard, Vancouver, ISO, and other styles
7

Al-Sulaiman, Fahad A., and Amro M. Al-Qutub. "Design of Small Centrifugal Compressors Performance Test Facility." In ASME Turbo Expo 2004: Power for Land, Sea, and Air. ASMEDC, 2004. http://dx.doi.org/10.1115/gt2004-53821.

Full text
Abstract:
Actual performance testing is a key element in the design stage, development and troubleshooting of centrifugal compressors. The present work discusses the procedure for designing the experimental setup and the selection of drive unit for variable centrifugal compressors sizes. It starts with setting criteria of selection. A survey over different types of drive units and facility setup was conducted. It was found that the electric drive unit with the aid of transmission for stepping-up the speeds is the most suitable type. This is due mainly to the excellent control property of electric motors
APA, Harvard, Vancouver, ISO, and other styles
8

Al-Qutub, Amro M., and Fahad A. Al-Sulaiman. "Instrumentation Selection and Uncertainty Analysis for Performance Test of Small Centrifugal Compressors." In ASME Turbo Expo 2004: Power for Land, Sea, and Air. ASMEDC, 2004. http://dx.doi.org/10.1115/gt2004-53828.

Full text
Abstract:
In the design phase of centrifugal compressors, it is essential to have some experimental results on performance. The extent of usefulness of the experiments depends on quality and accuracy of the results. Part of proper experimental procedure is the correct selection of instrumentation leading to lower uncertainty in the final results. ASME PTC 10 (Performance Test Code on Compressors and Exhausters) requires fluctuation limits on the measured performance parameters. This does not guarantee limits for accuracy of performance parameters. Also, different experimental setup will affect uncertain
APA, Harvard, Vancouver, ISO, and other styles
9

Taher, Matt, and Cyrus Meher-Homji. "Matching of Gas Turbines and Centrifugal Compressors: Oil and Gas Industry Practice." In ASME Turbo Expo 2012: Turbine Technical Conference and Exposition. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/gt2012-68283.

Full text
Abstract:
Gas turbine driven centrifugal compressors are widely used in the oil and gas industry. In evaluating the optimum selection of gas turbine drivers for centrifugal compressors, one of the main objectives should be to verify proper integration and matching of the centrifugal compressor to its gas turbine driver. Gas turbines are of standard designs, while centrifugal compressors are specifically designed to meet customer requirements. The purchaser should clearly specify process requirements and define possible operating scenarios for the entire life of the gas turbine driven centrifugal compres
APA, Harvard, Vancouver, ISO, and other styles
10

Taher, Matt, Dragan Ristanovic, Cyrus Meher-Homji, and Pradeep Pillai. "Matching of Synchronous Motors and Centrifugal Compressors: Oil and Gas Industry Practice." In ASME Turbo Expo 2020: Turbomachinery Technical Conference and Exposition. American Society of Mechanical Engineers, 2020. http://dx.doi.org/10.1115/gt2020-15643.

Full text
Abstract:
Abstract Synchronous motor driven centrifugal compressors are widely used in the oil and gas industry. In evaluating the optimum selection of synchronous motor drivers for centrifugal compressors, it is important to understand the factors influencing a proper match for a centrifugal compressor and its synchronous motor driver. The buyer should specify process requirements and define possible operating scenarios for the entire life of the motor driven centrifugal compressor train. The compressor designer will use the buyer-specified process conditions to model the aerothermodynamic behavior of
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Selection of compressors"

1

Pantermuehl, P. J., and A. J. Smalley. TR-97-6 Compressor Anchor Bolt Design. Pipeline Research Council International, Inc. (PRCI), 1997. http://dx.doi.org/10.55274/r0011724.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Fischer and Bothwell. PR-309-14211-R01 SCR Application to Typical Two-Stroke Cycle Pipeline Engines. Pipeline Research Council International, Inc. (PRCI), 2015. http://dx.doi.org/10.55274/r0010848.

Full text
Abstract:
Future emissions regulations for the natural gas industry are imminent and will be, in some cases, very severe.� One of many possible technologies that may be applied to meet these regulations is an exhaust gas after treatment called Selective Catalytic Reduction or SCR. Application of SCR to 2 stroke cycle internal combustion engines offers a unique set of challenges unlike any other in existing SCR systems. This paper reviews these various challenges in detail, enumerates a functional specification for a �typical� compressor station, evaluates a selection of possible SCR system candidates� a
APA, Harvard, Vancouver, ISO, and other styles
3

Crocker, Malcolm, P. Raju, and S. Yang. NPR199201 Standard Sound Power Level Specification and Measurement Procedure. Pipeline Research Council International, Inc. (PRCI), 1992. http://dx.doi.org/10.55274/r0011640.

Full text
Abstract:
These guidelines describe a method for in-situ determination of the sound power level of the noise sources in indoor or outdoor environments for gas compressor station equipment using sound intensity measurements. The guidelines contain information on instrumentation, installation and operation of the source, procedures for the selection of a measurement surface, procedures for the sampling of sound intensity on the measurement surface, procedures for the calculation of sound power level, and techniques that can be used to qualify the measurement environment. Typical results obtained for diffe
APA, Harvard, Vancouver, ISO, and other styles
4

Cooke. L51783 100000 Hour Design Life of Turbo Compressor Packages. Pipeline Research Council International, Inc. (PRCI), 1998. http://dx.doi.org/10.55274/r0010340.

Full text
Abstract:
The gas pipeline industry continues to respond to the challenges of competitive markets and the need to manage the cost of service effectively. A major cost element being reviewed by the industry is the operating and maintenance expense for its fleet of older turbo compressor units. Many turbo-machinery manufacturers and operators typically quote 100,000 hours as a design limit for service life of turbo compressor components. The Pipeline Research Committee initiated this study to review the life limiting criteria for certain critical components and determine if the design target of 100,000 ho
APA, Harvard, Vancouver, ISO, and other styles
5

Panek, McCarthy, and Drayton. PR-312-12208-R04 NO2-NOx Ratio Data Compilation and Assessment. Pipeline Research Council International, Inc. (PRCI), 2016. http://dx.doi.org/10.55274/r0011012.

Full text
Abstract:
When modeling NO2 impacts from combustion sources, justification is required to receive approval of a representative in-stack NO2/NOx ratio, which is a key model input when using advanced modeling tiers that consider plume chemistry. A September 30, 2014 EPA memorandum requires approval by the Regional Office on a case-by-case basis regarding the selection and application of the in-stack NO2/NOx ratio. The EPA Tier 2 Ambient Ratio Method (ARM2) and Tier 3 Ozone Limiting Method (OLM) and Plume Volume Molar Ratio Method (PVMRM) NO2 methods require an in-stack NO2/NOx ratio (ISR) as an input to A
APA, Harvard, Vancouver, ISO, and other styles
6

McCarthy, James. PR-312-18209-E05 Compressor and Facility Leak EFs for T and S - Clarifying Different Program Approaches. Pipeline Research Council International, Inc. (PRCI), 2024. http://dx.doi.org/10.55274/r0000050.

Full text
Abstract:
Emission factors are often used to estimate methane leak emissions for natural gas transmission and storage facilities, such as compressor leak EFs and station leak EFs. However, different approaches are used in the literature for grouping compressor and other facility leak data, which can cause confusion when comparing estimates from different reports or data sources. It is also important to understand these differences when selecting EFs to use for purposes such as facility or system methane inventory development for a particular company or within a particular state. This white paper discuss
APA, Harvard, Vancouver, ISO, and other styles
7

Jay. L51723 Guidelines for Sound Power Level Measurements Compressor Equipment. Pipeline Research Council International, Inc. (PRCI), 1994. http://dx.doi.org/10.55274/r0010419.

Full text
Abstract:
Increasing legislation and public awareness of noise are intensifying the efforts of industries today to reduce the noise. The natural gas industry has proved that it is one of the industrial leaders in its awareness of noise problems and has maintained a vigorous research program in noise control for over 30 years. A noise survey can be done in several ways: point measurements, grid point methods, contour methods, scanning techniques, etc. The selection of the method depends on the accuracy required, available personnel, expertise etc. For the most accurate determination of sound power, the s
APA, Harvard, Vancouver, ISO, and other styles
8

Gomez-Leon, Steve, and Anthony J. Smalley. TR-97-7 Main Bearing Temperature Monitoring. Pipeline Research Council International, Inc. (PRCI), 1998. http://dx.doi.org/10.55274/r0011736.

Full text
Abstract:
Evaluates methods to monitor main bearing temperatures in reciprocating compressor units including industry practice, typical data, analysis of data characteristics and variability, identification of requirements for a monitoring strategy, alternative monitoring approaches, performance simulation for these alternatives, and the synthesis of a preferred approach, with factors to consider in selecting limits or alternatives to the preferred approach. It includes recommendations for the gathering of data from station logging systems which will help guide and refine monitoring decisions.
APA, Harvard, Vancouver, ISO, and other styles
9

Wilcox. PR-015-09200-R01A Compressor and Pump Station Incidents and Technology Gaps. Pipeline Research Council International, Inc. (PRCI), 2009. http://dx.doi.org/10.55274/r0010956.

Full text
Abstract:
In 2008, Pipeline Research Council International (PRCI) took the initiative to identify the main causes of reportable incidents in compressor and pump stations. Data was gathered from several sources including the United States� Department of Transportation Pipeline and Hazardous Materials Safety Administration, Canada�s National Energy Board, and PRCI member companies. More than 1600 incidents were reviewed over an 18 year period (1990 to 2008). The incidents were evaluated based on their frequency of occurrence and the consequences of the incidents (injury, ignition, environmental impact, et
APA, Harvard, Vancouver, ISO, and other styles
10

Ross, John A., and Elizabeth Frankenberg. Findings from Two Decades of Family Planning Research. Population Council, 1993. http://dx.doi.org/10.31899/pgy1993.1001.

Full text
Abstract:
This book presents a selection of empirical conclusions, or findings, from the body of family planning research that has accumulated over the last two decades. Twelve topics of current interest are reviewed, as a sequel to three similar publications issued in 1971, 1972, and 1974. A findings document compresses what has been learned into straightforward declarative statements, giving summary evidence to support each statement. In cases where a conclusion is well founded, with extensive supporting evidence, only illustrative or summary references are needed. In other cases, citations are requir
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Selection of compressors' for particular source types:
Journal articles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography