Academic literature on the topic 'Self-healing concrete composites'

It is a universal fact that concrete is one of the most employed construction materials and hence its exigency is booming at a rocket pace, which in turn, has resulted in a titanic demand of ordinary Portland cement. Regrettably, the production of this essential binder of concrete is not merely found to consume restricted natural resources but also found to be associated with emission of carbon dioxide—a primary greenhouse gas (GHG) which is directly answerable to earth heating, resulting in the gigantic dilemma of global warming. Nowadays, in order to address all these impasses, researchers are attracted to innovative Geopolymer concrete technology. However, crack development of various sizes within the concrete is inevitable irrespective of its kind, mix design, etc., owing to external and internal factors viz., over-loading, exposure to severe environments, shrinkage, or error in design, etc., which need to be sealed otherwise these openings permits CO2, water, fluids, chemicals, harmful gases, etc., to pass through reducing service life and ultimately causing the failure of concrete structures in the long term. That is why instant repairs of these cracks are essential, but manual mends are time-consuming and costly too. Hence, self-healing of cracks is desirable to ease their maintenances and repairs. Self-healing geopolymer concrete (SHGPC) is a revolutionary product extending the solution to all these predicaments. The present manuscript investigates the self-healing ability of geopolymer paste, geopolymer mortar, and geopolymer concrete—a slag-based fiber-reinforced and a variety of other composites that endow with multifunction have also been compared, keeping the constant ratio of water to the binder. Additionally, the feasibility of bacteria in a metakaolin-based geopolymer concrete for self-healing the cracks employing Bacteria-Sporosarcina pasteurii, producing Microbial Carbonate Precipitations (MCP), was taken into account with leakage and the healing process in a precipitation medium. Several self-healing mechanisms, assistances, applications, and challenges of every strategy are accentuated, compared with their impacts as a practicable solution of autogenously-healing mechanisms while active concretes are subjected to deterioration, corrosion, cracking, and degradation have also been reviewed systematically.

Low tensile strength, poor elastic modulus, and complex concrete cracking work condition are almost unavoidable due to the intrinsic brittleness. To deal with concrete maintenance and durability, microbial self-healing concretes have been rapidly developed and widely applied recently. The microbial self-healing can specifically patch fractures as well as boost the concrete structure’s capacity, durability, and permeability. This paper presents the state-of-the-art in the microbe induced self-healing in cement-based composites. The microorganism and carriers were classified according to the working theory and repair effects. Additionally, the precise efficiency and effect of various technologies are also evaluated for microbial immobilization. Based on the literature review and summary from the perspective of microorganism, carriers, and immobilization methods, challenges and further works are discussed.

Self-healing materials have been developed since the 1990s and are currently used in various applications. Their performance in extreme environments and their mechanical properties have become a topic of research interest. Herein, we discuss cutting-edge self-healing technologies for hard materials and their expected healing processes. The progress that has been made, including advances in and applications of novel self-healing fiber-reinforced plastic composites, concrete, and metal materials is summarized. This perspective focuses on research at the frontier of self-healing structural materials.

Self-healing concrete designs can protect against deterioration and improve durability. However, there is no unified conclusion regarding the effective preparation and mechanical properties of self-healing concrete. In this paper, microcapsules are used in cement-based materials, the reasonable dosage of microcapsules is determined, and the self-healing performance of the microcapsule self-healing system under different curing agents is explored. The microcapsules and curing agent are shown to enhance the flexural and compressive strength of mortar specimens at relatively low contents. The optimal microcapsule content in terms of compressive strength is 1–3%. When the content of the microcapsule reaches 7%, the strength of the specimen decreases by approximately 30%. Sodium fluorosilicate is better-suited to the microcapsule self-healing cement-based system than the other two fluorosilicates, potassium fluorosilicate and magnesium, which have similarly poor healing performance as curing agents. Healing time also appears to significantly influence the microcapsule self-healing system; mortar specimens that healed for 28 days are significantly higher than those that healed for 7 days. This work may provide a valuable reference for the design and preparation of self-healing cementitious composite structures.

In the concrete industry, various R&D efforts have been devoted to self-healing technology, which can maintain the long-term performance of concrete structures, which is important in terms of sustainable development. Cracks in cement composites occur and propagate because of various internal and external factors, reducing the composite’s stability. Interest in “self-healing” materials that can repair cracks has led researchers to embed self-healing capsules in cement composites. Overcoming the limitations of polymer capsules produced by chemical manufacturing methods, three-dimensional (3D) printing can produce capsules quickly and accurately and offers advantages such as high material strength, low cost, and the ability to fabricate capsules with complex geometries. We performed structural analysis simulations, experimentally evaluated the mechanical properties and solubility of poly(lactic acid) (PLA) capsules, and examined the effect of the capsule wall thickness and printing direction on cement composites embedded with these capsules. Thicker capsules withstood larger bursting loads, and the capsule rupture characteristics varied with the printing angle. Thus, the capsule design parameters must be optimized for different environments. Although the embedded capsules slightly reduced the compressive strength of the cement composites, the benefit of the encapsulated self-healing agent is expected to overcome this disadvantage.

Concrete has a natural self-healing capability to seal small cracks, named autogenous healing, which is mainly produced by continuing hydration and carbonation. This capability is very limited and is activated only when in direct contact with water. High Performance Fibre-Reinforced Concrete and Engineered Cementitious Composites have been reported to heal cracks for low damage levels, due to their crack pattern with multiple cracks and high cement contents. While their superior self-healing behaviour compared to traditional concrete types is frequently assumed, this study aims to have a direct comparison to move a step forward in durability quantification. Reinforced concrete beams made of traditional, high-performance and ultra-high-performance fibre-reinforced concretes were prepared, sized 150×100×750 mm3. These beams were pre-cracked in flexion up to fixed strain levels in the tensioned zone to allow the analysis of the effect of the different cracking patterns on the self-healing capability. Afterwards, water permeability tests were performed before and after healing under water immersion. A modification of the water permeability test was also explored using chlorides to evaluate the potential protection of this healing in chloride-rich environments. The results show the superior durability and self-healing performance of UHPFRC elements.

Concrete is the most used material in the construction industry, being prone to cracking. Following the action of aggressive external agents, through cracks, access routes to the embedded reinforcement are created. By enclosing in concrete various materials that can induce the self-healing property, by taking actions when the cracks appear, the access of the external aggressive agents to the reinforcement can be stopped, therefore creating more durable materials. The aim of the research is to design a micro concrete with self-healing properties, based on Engineered Cementitious Composites principles from the literature and using local raw materials.