To see the other types of publications on this topic, follow the link: Separation equipment.

Dissertations / Theses on the topic 'Separation equipment'

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 19 dissertations / theses for your research on the topic 'Separation equipment.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse dissertations / theses on a wide variety of disciplines and organise your bibliography correctly.

1

Bennink, Dirk. "Design of solids separation equipment : a thesis." Thesis, Queensland University of Technology, 1989. https://eprints.qut.edu.au/36450/1/36450_Bennink_1989.pdf.

Full text
Abstract:
This work covers a reassessment of the 'Hot Break' separation problem by a mechanical engineer from outside the brewing industry. The solid-liquid separation problem was therefore investigated without prior knowledge of constraints or current practices. During the brewing of beer an unwanted, insoluble precipitate, 'trub' is formed, reported to have undesirable effects on the finished beer quality. The existing equipment, 'whirlpool' separators, designed to eliminate this 'trub' performed poorly, allowing much of the precipitate to be carried over to subsequent processes. To remedy
APA, Harvard, Vancouver, ISO, and other styles
2

Hoettges, Kai F. "Miniaturisation in separation science : liquid-liquid separation on a chip." Thesis, University of Surrey, 2002. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.252454.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Md, Ali Umi Fazara. "Electrochemical separation and purification of metals from waste electrical and electronic equipment (WEEE)." Thesis, Imperial College London, 2011. http://hdl.handle.net/10044/1/7108.

Full text
Abstract:
This thesis reports on results of a novel process to recover metals selectively by electrodeposition by pumping aqueous acidic chloride solutions produced by leaching of shredded waste electrical and electronic equipment (WEEE) through the potentiostatically controlled cathode of an electrochemical reactor. The WEEE solutions contained low concentrations of precious metals, including Ag, Au, Pd and high concentrations of Cu. Electrodeposition from low concentrations of such dissolved metals requires electrodes with high mass transport rate coefficients and specific surface areas to increase cr
APA, Harvard, Vancouver, ISO, and other styles
4

Vasudevan, Vivek. "Evaluation of the separation involved in recycling end-of-life (EOL) electronic equipment." Morgantown, W. Va. : [West Virginia University Libraries], 2004. https://etd.wvu.edu/etd/controller.jsp?moduleName=documentdata&jsp%5FetdId=45.

Full text
Abstract:
Thesis (M.S.)--West Virginia University, 2004.<br>Title from document title page. Document formatted into pages; contains xi, 92 p. : ill. (some col.). Includes abstract. Includes bibliographical references (p. 74-76).
APA, Harvard, Vancouver, ISO, and other styles
5

Ting, Voon-Cheung Roger. "Separation and recognition of connected handprinted capital English characters." Thesis, University of British Columbia, 1986. http://hdl.handle.net/2429/26747.

Full text
Abstract:
The subject of machine recognition of connected characters is investigated. A generic single character recognizer (SCR) assumes there is only one character in the image. The goal of this project is to design a connected character segmentation algorithm (CCSA) without the above assumption. The newly designed CCSA will make use of a readily available SCR. The input image (e.g. a word with touching letters) is first transformed (thinned) into its skeletal form. The CCSA will then extract the image features (nodes and branches) and store them in a hierarchical form. The hierarchy stems from the l
APA, Harvard, Vancouver, ISO, and other styles
6

Ding, Hao. "Facility separation criteria development and enhancement for directive Distance Measuring Equipment (DME) in the national airspace system." Ohio University / OhioLINK, 1998. http://rave.ohiolink.edu/etdc/view?acc_num=ohiou1176835681.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Ляпощенко, Олександр Олександрович, Александр Александрович Ляпощенко, Oleksandr Oleksandrovych Liaposhchenko, et al. "Optimization modeling and development of separation, heat and mass transfer equipment of the unit for production of liquid nitrogen fertilizers." Thesis, Sumy State University, 2016. http://essuir.sumdu.edu.ua/handle/123456789/46771.

Full text
Abstract:
According to the Report of the European Commission Joint Research Centre announced in 2015 raise of prices on nitrogen fertilizers is one of the biggest challenges which increase the food problem worldwide. The main reason for this is high energy consumption of the production process of solid nitrogen fertilizers. While production of liquid nitrogen fertilizers is 30-40% cheaper than manufacturing of complex concentrated water soluble fertilizers. In the agriculture of the United States about 50% of all nitrogen fertilizers are used in liquid form. One of such fertilizer types is ammonia water
APA, Harvard, Vancouver, ISO, and other styles
8

Дем'яненко, М. М., О. Є. Старинський, Іван Володимирович Павленко та ін. "Чисельне дослідження взаємодії газодинамічних сепараційних елементів з газорідинним потоком". Thesis, Сумський державний університет, 2017. http://essuir.sumdu.edu.ua/handle/123456789/65098.

Full text
Abstract:
Природний газ в пластових умовах у своєму складі містить велику кількість домішок, зокрема важкі вуглеводневі фракції конденсату та пластову воду. Тому для подальшого транспортування по магістральним газопроводам його піддають обробці до належної якості на установках комплексної підготовки газу, невід’ємними елементами технологічних ліній яких є сепараційне обладнання. Високі експлуатаційні характеристики цього обладнання досягаються лише при дотриманні розрахункових значень режимних параметрів.
APA, Harvard, Vancouver, ISO, and other styles
9

Tzou, Nicholas. "Low-cost sub-Nyquist sampling hardware and algorithm co-design for wideband and high-speed signal characterization and measurement." Diss., Georgia Institute of Technology, 2014. http://hdl.handle.net/1853/51876.

Full text
Abstract:
Cost reduction has been and will continue to be a primary driving force in the evolution of hardware design and associated technologies. The objective of this research is to design low-cost signal acquisition systems for characterizing wideband and high-speed signals. As the bandwidth and the speed of such signals increase, the cost of testing also increases significantly; therefore, innovative hardware and algorithm co-design are needed to relieve this problem. In Chapter 2, a low-cost multi-rate system is proposed for characterizing the spectra of wideband signals. The design is low-cost in
APA, Harvard, Vancouver, ISO, and other styles
10

Thorsén, Jenny. "Purification of His-tagged Proteins Using WorkBeads 40 TREN as a Pre-Treatment Step Prior Loading Sample onto IMAC Resins with the Purpose to Enhance Performance." Thesis, Uppsala universitet, Biokemi, 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-439642.

Full text
Abstract:
This work is the result of evaluating a novel strategy for the purification of recombinant His-tagged proteins. Proteins purified in this study were the E. coli translational proteins IF-3, RF-1, and RFF. The study aimed to analyse the potential of using Bio-Works WorkBeads™40 TREN, a multimodal anion ion exchange chromatography resin, as a pretreatment step upstream an immobilized metal ion chromatography (IMAC) resin to enhance performance efficiency of His-tagged protein purification. The method demonstrated here shows potential for anyone seeking to increase the purity of His-tagged protei
APA, Harvard, Vancouver, ISO, and other styles
11

Gungor, Ugras. "Design Of A New Equipment For Sesame Seed Dehulling." Master's thesis, METU, 2004. http://etd.lib.metu.edu.tr/upload/2/678/index.pdf.

Full text
Abstract:
In this study, new methods and processing equipments for sesame dehulling were investigated. First, water absorption of sesame seed was studied at 20, 30, and 40&deg<br>C. The data could be modeled using Peleg equation where it was found that the constant k1 was inversely related to temperature but the effect of temperature on k2 was negligible. In the second phase of the work a lab scale continuous screw conveyor as dehuller and two equipments, (1) fluidized bed dryer and (2) hull separator to function as agitator, dryer and separator, for hull separation were designed. Fluidized bed unit
APA, Harvard, Vancouver, ISO, and other styles
12

Ляпощенко, Олександр Олександрович, Александр Александрович Ляпощенко, Oleksandr Oleksandrovych Liaposhchenko та ін. "Оптимізаційне проектування багатофункціонального сепараційного нафтогазового обладнання". Thesis, м. Дніпропетровськ, Український державний хіміко-технологічний університет, 2015. http://essuir.sumdu.edu.ua/handle/123456789/42689.

Full text
Abstract:
Особливу цікавість для подальших оптимізаційних досліджень представляє визначення необхідної потужності електричного поля, для підтримки Вандервальсових сил притяжіння диполів. Подальші дослідження будуть спрямовані на визначення доцільності та оцінювання ефективності встановлення динамічних бризковловлюючих насадок.<br>В основу спроектованого апарату покладено ряд принципово нових та оригінальних технічних рішень, що забезпечують його ефективність в широкому діапазоні витрат вхідної суміші, що дозволяє забезпечити високі техніко-економічні показники. Значну увагу приділено актуальним питанням
APA, Harvard, Vancouver, ISO, and other styles
13

近藤, 多伸, and Kazunobu Kondo. "Blind source separation with the low computational costs for the mobile and portable speech equipment." Thesis, 2014. http://hdl.handle.net/2237/20515.

Full text
APA, Harvard, Vancouver, ISO, and other styles
14

SHEN, CHIA-HSIN, and 沈佳欣. "A Case Study on the Developing Trajectory for Small and Medium-Sized Magnetic Separation Equipment Industry." Thesis, 2017. http://ndltd.ncl.edu.tw/handle/zm2tm8.

Full text
Abstract:
碩士<br>國立雲林科技大學<br>企業管理系<br>105<br>In the past, the important role of promoting Taiwan's economic growth was to account for 97% of all small and medium enterprises (SMEs) in Taiwan. For most of the SMEs, compared to large enterprises, the overall lack of resources, making SMEs in the growth stage is easy to be restricted. However, there have some small but competitive companies on the market. Due to the low degree of exposure and not being recognized by the society, Simon (1986) called these SMEs as“Hidden Champion”. How Taiwan's SMEs to become the industry's Hidden Champion? What are the k
APA, Harvard, Vancouver, ISO, and other styles
15

Naidoo, Pavanisha. "Investigation of the effects of the process and equipment parameters on the separation efficiency of a vibrating plate extractor." Thesis, 2012. http://hdl.handle.net/10413/9885.

Full text
Abstract:
In the industrial world where many different types of separation processes are available, liquid-liquid extraction is gaining increasing attention, since it offers many advantages over distillation especially for heat sensitive and azeotropic compounds. Liquid-liquid extraction is an essential separation method that applies to the chemical, petroleum, metallurgy, biotechnology, nuclear and waste management related industries. This separation technique also offers potential means of saving energy, thus making extraction a more economical separation process. The effectiveness of a vibrating plat
APA, Harvard, Vancouver, ISO, and other styles
16

LEE, KUANG HAN, and 李光瀚. "Develop Marketing Policy for PSA Gas Separation Equipment in Taiwan and Mainland China Market-A Case of Tai Chi Enterprise Co." Thesis, 2016. http://ndltd.ncl.edu.tw/handle/2743k7.

Full text
Abstract:
碩士<br>南臺科技大學<br>高階主管企管碩士班<br>104<br>In 1991, PSA plant (oxygen generator) was brought in Taiwan for the production line in the glass factory. It was only a trial at the beginning, but gradually replacing the use of oxygen cylinder in some application fields. Compared to oxygen cylinder, PSA plant is much safer, cheaper and more convenient, which make it succeed in the market nowadays. By taking water treatment and oxygen-enriched combustion as examples, this study analyzes the reason why the applications of oxygen generator continuously expand the market. Secondly, from industrial use only to
APA, Harvard, Vancouver, ISO, and other styles
17

Wang, Yu Jie. "Evaluation of laboratory model grain cleaning and separating equipment." 1989. http://hdl.handle.net/2097/22207.

Full text
APA, Harvard, Vancouver, ISO, and other styles
18

Lin, Gaai-Hong, and 林佳宏. "Study on the separative efficiency for Parapenaeopsis hardwickii in shrimp trawl with TED equipment." Thesis, 1996. http://ndltd.ncl.edu.tw/handle/41744582942789441541.

Full text
APA, Harvard, Vancouver, ISO, and other styles
19

Negrini, Oscar. "Evaluating the performance of laboratory model grain cleaning and separating equipment for grading different classes of grain." 1989. http://hdl.handle.net/2097/22203.

Full text
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!