Relevant bibliographies by topics / Serial communication of data

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Serial communication of data'

Author: Grafiati
Published: 4 June 2021
Last updated: 16 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Serial communication of data.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Serial communication of data"

1

Naskar, Saptarshi, Krishnendu Basuli, and Samar Sen Sarma. "Serial port data communication using MODBUS protocol." Ubiquity 2008, January (January 2008): 1. http://dx.doi.org/10.1145/1348478.1348477.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Jiang, Bing Hua, Fang Bing Liu, Huan Liu, Lei Song, and Rui Song. "Based on the AVR Micro Controller's Serial Communication Protocol Implementation." Advanced Materials Research 734-737 (August 2013): 2838–41. http://dx.doi.org/10.4028/www.scientific.net/amr.734-737.2838.

Full text
Abstract:
Single-chip microcomputer and PC for data transmission,Using a serial port communication protocol,This paper will through the custom serial port communicatio protocol,Through the analysis of the serial port communication protocol packet format,Resolve the Host computer or slavecomputer(AVR MCU) serial port to send and receive over the packet,Shown in serial debugging assistant,And gives the specific implementation method.
APA, Harvard, Vancouver, ISO, and other styles
3

Khoury, J. M., and K. R. Lakshmikumar. "High speed serial transceivers for data communication systems." IEEE Communications Magazine 39, no. 7 (July 2001): 160–65. http://dx.doi.org/10.1109/35.933452.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Ewen, J. F., M. Soyuer, A. X. Widmer, K. R. Wrenner, B. D. Parker, and H. A. Ainspan. "CMOS circuits for Gb/s serial data communication." IBM Journal of Research and Development 39, no. 1.2 (January 1995): 73–81. http://dx.doi.org/10.1147/rd.391.0073.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Kyeongho Lee, Sungjoon Kim, Gijung Ahn, and Deog-Kyoon Jeong. "A CMOS serial link for fully duplexed data communication." IEEE Journal of Solid-State Circuits 30, no. 4 (April 1995): 353–64. http://dx.doi.org/10.1109/4.375953.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Wu, Di, and Qiang Li. "The Application of IIC BUS in Data Communication Based on S3C2410A." Applied Mechanics and Materials 513-517 (February 2014): 1863–66. http://dx.doi.org/10.4028/www.scientific.net/amm.513-517.1863.

Full text
Abstract:
IIC BUS (Inter Integrated Circuit BUS) is a bus that system chip control peripherals equipment commonly used as a simple, two-way, two-wire ,and synchronous serial bus to solve the communication between these devices. The paper discuss the ways how to use the IIC serial data communication protocol according to the IIC controller features ,adopting master-slave structure to control IIC device of AT24C08 chip with S3C2410A as the carrier to fulfill data communication.
APA, Harvard, Vancouver, ISO, and other styles
7

YANG, Shi-hua, Xiu-min WANG, Ye-jun ZHU, and Jian-xin REN. "Data fusion estimation algorithm based on serial communication missing measurements." Journal of Computer Applications 31, no. 4 (June 10, 2011): 1152–54. http://dx.doi.org/10.3724/sp.j.1087.2011.01152.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Shen, Hong Bin, and Pan Pan Wu. "Research on Serial Communication Technology Based on Virtools." Applied Mechanics and Materials 58-60 (June 2011): 2147–51. http://dx.doi.org/10.4028/www.scientific.net/amm.58-60.2147.

Full text
Abstract:
In order to solve the problem of interactive communication between virtual reality development platform Virtools and serial port peripherals, the software development framework of Virtools, modular development technology and serial communication technology based on Windows were studied. A serial communication modular was developed that extended the development of Virtools in serial data communication. Finally, the availability of the modular was tested with the serial testing tools.
APA, Harvard, Vancouver, ISO, and other styles
9

Zheng, Wei, Jin Liang Zhou, and Jin Min Peng. "The Control on Data Transmission of Multi-Bar Warp Knitted Machine." Advanced Materials Research 332-334 (September 2011): 256–59. http://dx.doi.org/10.4028/www.scientific.net/amr.332-334.256.

Full text
Abstract:
Mechanism controlling longitudinal movements of guide bars in a warp knitting machine is still employed in many factories in China. But it is use a lot of time in order to change the type of fabrics. This sort of mechanism is gradually replaced by stepping motor that controlled by microcomputer. So, it is need to send data that guide bar need to move from computer to microcomputer. A circuit of transmission data is designed. The serial communication uses port of RS232C and potential convertor MAX232ACPE without model. There are use only three lines of RXD, TXD and GND of the serial communication port in the microcomputer (80C51). The protocol of transmission data is programmed. The serial communication baud rate at 2400 is set. The data that control movement of guide bars can be transmitted rightly.
APA, Harvard, Vancouver, ISO, and other styles
10

Zhang, Shan Shan, and Chao Chen. "Design and Implementation of Intelligent Multi-Serial Ports Data Transmission System Based on NIOS II Using in Smart Home." Applied Mechanics and Materials 556-562 (May 2014): 1605–9. http://dx.doi.org/10.4028/www.scientific.net/amm.556-562.1605.

Full text
Abstract:
In the need of intelligent multi-serial ports communication in smart home project, which ask for less consumption of resources. This paper introduces a NIOS II-based 6-way serial data communication, and it defines the corresponding data communication protocol.It makes PC could easily exchange data with FPGA and peripheral circuits. Experimental results show that the scheme has high reliability and stability. Serial number can be flexibly changed according to the actual needs, It could also be configured individually for each serial port, so it has good portability, flexibility and easy of implementation. At the same time reducing the hardware debugging time and saving hardware resources.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Serial communication of data"

1

Ellis, David Lambert. "The reliability and efficiency of serial digital data in industrial communications." Thesis, Liverpool John Moores University, 2000. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.247334.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Lazarou, John. "Serial communications between personal computer and Unix." Virtual Press, 1989. http://liblink.bsu.edu/uhtbin/catkey/722455.

Full text
Abstract:
A system is developed which facilitates communication between a Personal Computer and a Mainframe, and can do both directions, and lets the user execute Unix shell commands while the file transfer is in process. This communication system consists of two programs, one named "Thesis.EXE" that runs on a DOS based machine, and one named named "COMMGREEK" that runs on a Unix based machine.
Department of Computer Science
APA, Harvard, Vancouver, ISO, and other styles
3

Nasser, Jamil. "Implementation of modern communication interfaces in systems with existing serial interface : EMBEDDED SYSTEMS, OIL MONITORING." Thesis, KTH, Skolan för informations- och kommunikationsteknik (ICT), 2015. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-177805.

Full text
Abstract:
Today’s robotics technology is often extremely user and location dependable, meaning that only a specific user using a specific hardware or software interface in a specific location can access that technique and alter it. This thesis focuses on an oil-monitoring system called Orilink, with those exact constraints. Orilink is only accessible through a specific computer using a serial port located in a special place. It is neither accessible from elsewhere nor through the cloud. This thesis removes that constraint and enables the access to Orilink independently of the user’s location or software / hardware interface.
APA, Harvard, Vancouver, ISO, and other styles
4

Baca, Dawnielle C. "DATA ACQUISITION, ANALYSIS, AND SIMULATION SYSTEM (DAAS)." International Foundation for Telemetering, 1994. http://hdl.handle.net/10150/608561.

Full text
Abstract:
International Telemetering Conference Proceedings / October 17-20, 1994 / Town & Country Hotel and Conference Center, San Diego, California
The Data Acquisition, Analysis, and Simulation System (DAAS) is a computer system designed to allow data sources on spacecraft in the Flight System Testbed (FST) to be monitored, analyzed, and simulated. This system will be used primarily by personnel in the Flight System Testbed, flight project designers, and test engineers to investigate new technology that may prove useful across many flight projects. Furthermore, it will be used to test various spacecraft design possibilities during prototyping. The basic capabilities of the DAAS involve unobtrusively monitoring various information sources on a developing spacecraft. This system also provides the capability to generate simulated data in appropriate formats at a given data rate, and to inject this data onto the communication line or bus, using the necessary communication protocol. The DAAS involves Serial RS232/RS422, Ethernet, and MIL-STD-1553 communication protocols, as well as LabVIEW software, VME hardware, and SunOS/UNIX operating systems.
APA, Harvard, Vancouver, ISO, and other styles
5

Guo, Fei. "Development of the real-time data acquisition system for Philips Patient Monitor." Case Western Reserve University School of Graduate Studies / OhioLINK, 2014. http://rave.ohiolink.edu/etdc/view?acc_num=case1405963966.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Tan, Ronson K. "Design and analysis of an integrated-optical serial-to-parallel converter for high-data-rate communications." Diss., Georgia Institute of Technology, 1993. http://hdl.handle.net/1853/13382.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Assaad, Maher. "Design and modeling of clock and data recovery integrated circuit in 130 nm CMOS technology for 10 Gb/s serial data communications." Thesis, University of Glasgow, 2009. http://theses.gla.ac.uk/707/.

Full text
Abstract:
Abstract This thesis describes the design and implementation of a fully monolithic 10 Gb/s phase and frequency-locked loop based clock and data recovery (PFLL-CDR) integrated circuit, as well as the Verilog-A modeling of an asynchronous serial link based chip to chip communication system incorporating the proposed concept. The proposed design was implemented and fabricated using the 130 nm CMOS technology offered by UMC (United Microelectronics Corporation). Different PLL-based CDR circuits topologies were investigated in terms of architecture and speed. Based on the investigation, we proposed a new concept of quarter-rate (i.e. the clocking speed in the circuit is 2.5 GHz for 10 Gb/s data rate) and dual-loop topology which consists of phase-locked and frequency-locked loop. The frequency-locked loop (FLL) operates independently from the phase-locked loop (PLL), and has a highly-desired feature that once the proper frequency has been acquired, the FLL is automatically disabled and the PLL will take over to adjust the clock edges approximately in the middle of the incoming data bits for proper sampling. Another important feature of the proposed quarter-rate concept is the inherent 1-to-4 demultiplexing of the input serial data stream. A new quarter-rate phase detector based on the non-linear early-late phase detector concept has been used to achieve the multi-Giga bit/s speed and to eliminate the need of the front-end data pre-processing (edge detecting) units usually associated with the conventional CDR circuits. An eight-stage differential ring oscillator running at 2.5 GHz frequency center was used for the voltage-controlled oscillator (VCO) to generate low-jitter multi-phase clock signals. The transistor level simulation results demonstrated excellent performances in term of locking speed and power consumption. In order to verify the accuracy of the proposed quarter-rate concept, a clockless asynchronous serial link incorporating the proposed concept and communicating two chips at 10 Gb/s has been modelled at gate level using the Verilog-A language and time-domain simulated.
APA, Harvard, Vancouver, ISO, and other styles
8

Zaklouta, Ahmadmunthar. "High-Speed Communication Scheme in OSI Layer 2 Research and Implementation." Thesis, KTH, Skolan för elektroteknik och datavetenskap (EECS), 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-254398.

Full text
Abstract:
This thesis is part of a project at Bombardier’s Object Controller System. This system acts as a communication interface for several sub-systems that control the railway traffic. Therefore, part of the safety and availability of railway transportation is dependent on the performance and reliability of this system especially the digital communication system that handles the board-to-board communication. Thus, Bombardier has implemented new high-speed LVDS channels to use instead of the implemented RS-485 channels to improve the board-to-board communication performance in the Object Controller System but they lack a transceiver. This thesis work explores possible transceiver solutions that achieve Bombardier requirements. Reusability is very important for Bombardier for safety compliance and certification. Therefore, the investigation was carried out by looking into what is currently implemented and then was carried on by looking into transceivers that used in highspeed communication and check their suitability and compliance for the FPGA and the requirements. This exploration results in three experiments for different transceiver architecture. The first experiment exploits the currently implemented transceiver architecture and it is not suitable for high-speed data rate due to a limitation in the buffer. The second experiment overcomes the buffer limitation by using a clock domain crossing buffer and results in a 100-time faster system. The third experiment aimed to achieve a higher data rate by using a clock and data recovery transceiver and results in a promising solution but needs some enhancements. For testing, a verification methodology following the one-way stress test architecture has been developed using VHDL for simulation and for in-chip testing and the results were verified using ChipScope logic analyzer from Xilinx. In addition, a thermal test for the solution from the second experiment has been performed.
Denna avhandling är en del av ett projekt på Bombardiers Object Controller System. Detta system fungerar som ett kommunikationsgränssnitt för flera delsystem som styr järnvägstrafiken. Därför är en del av säkerheten och tillgängligheten av järnvägstransporten beroende av systemets prestanda och tillförlitlighet, särskilt det digitala kommunikationssystemet som hanterar kommunikationen ombord. Bombardier har sålunda implementerat nya höghastighets LVDS-kanaler för att använda istället för de implementerade RS-485-kanalerna för att förbättra kommunikationsprestandan ombord i objektkontrollen, men de saknar en transceiver. Denna avhandling arbetar med att undersöka möjliga transceiverlösningar som uppnår Bombardier-krav. Återanvändbarhet är mycket viktigt för Bombardier för säkerhetsöverensstämmelse och certifiering. Undersökningen genomfördes därför genom att undersöka vad som för närvarande implementeras och sedan genomföras genom att titta på transceivers som används i höghastighetskommunikation och kontrollera deras lämplighet och överensstämmelse för FPGA och kraven. Denna undersökning resulterar i tre experiment för olika transceiverarkitektur. Det första experimentet utnyttjar den nuvarande implementerade transceiverarkitekturen. Den är inte lämplig för höghastighetsdatakommunikation på grund av en begränsning i bufferten. Det andra experimentet övervinns buffertbegränsningen genom att använda en klockdomänöverföringsbuffert vilket resulterar i ett 100-timmars snabbare system. Det tredje experimentet syftade till att uppnå en högre datahastighet genom att använda en klockoch dataåterställningstransceiver vilket resulterar i en lovande lösning men behöver vissa förbättringar. För testning har en verifieringsmetod som följer envägsstresstestarkitekturen utvecklats med hjälp av VHDL för simulering och för inchip-testning. Resultaten verifierades med hjälp av ChipScope logic analyzer från Xilinx. Dessutom har ett termiskt test för lösningen från det andra experimentet utförts.
APA, Harvard, Vancouver, ISO, and other styles
9

Zošiak, Dušan. "Analýza USB rozhraní." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2009. http://www.nusl.cz/ntk/nusl-217865.

Full text
Abstract:
Tato práce je zaměřena na zpracování a analýzu USB komunikačního protokolu a implementace jeho jednotlivých částí do FPGA obvodu s využitím programovacího jazyka VHDL. Ve finální podobě by měla práce představovat souhrnný a ucelený dokument popisující principy USB rozhraní a jeho komunikace doplněných praktickým návrhem v jazyce VHDL, který by byl schopen převést data do USB.
APA, Harvard, Vancouver, ISO, and other styles
10

Engstrand, Johan. "A 3D-printed Fat-IBC-enabled prosthetic arm : Communication protocol and data representation." Thesis, Uppsala universitet, Fasta tillståndets elektronik, 2020. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-420051.

Full text
Abstract:
The aim of this thesis is to optimize the design of the Fat-IBC-based communication of a novel neuroprosthetic system in which a brain-machine interface is used to control a prosthetic arm. Fat-based intra-body communication (Fat-IBC) uses the fat tissue inside the body of the bearer as a transmission medium for low-power microwaves. Future projects will use the communication system and investigate ways to control the prosthetic arm directly from the brain. The finished system was able to individually control all movable joints of multiple prosthesis prototypes using information that was received wirelessly through Fat-IBC. Simultaneous transmission in the other direction was possible, with the control data then being replaced by sensor readings from the prosthesis. All data packets were encoded with the COBS/R algorithm and the wireless communication was handled by Digi Xbee 3 radio modules using the IEEE 802.15.4 protocol at a frequency of 2.45 GHz. The Fat-IBC communication was evaluated with the help of so-called "phantoms" which emulated the conditions of the human body fat channel. During said testing, packet loss measurements were performed for various combinations of packet sizes and time intervals between packets. The packet loss measurements showed that the typical amount of transmitted data could be handled well by the fat channel test setup. Although the transmission system was found to be well-functioning in its current state, increasing the packet size to achieve a higher granularity of the movement was perceived to be viable considering the findings from the packet loss measurements.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Serial communication of data"

1

Institute, American National Standards. IEEE standard serial ASCII Instrumentation Loop (SAIL) shipboard data communication. New York, NY: Institute of Electrical and Electronics Engineers, 1985.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

R, Ramasubramanian, ed. Interfacing the IBM-PC to medical equipment: The art of serial communication. Cambridge: Cambridge University Press, 1995.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Martin, David. Serials business cycle analysis for EDI: Report prepared for Book Industry Communication and the British National Bibliography Research Fund. Boston Spa: British Library Research and Development Department, 1996.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Holland, Robert C. A program for the Microsoft Windows environment to collect analog-to-digital and serial communication data on a personal computer based system. La Jolla, Calif: U.S. Dept. of Commerce, National Oceanic and Atmospheric Administration, National Marine Fisheries Service, Southwest Fisheries Science Center, 1992.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Communication system design using DSP algorithms: With laboratory experiments for the TMS320C6713 DSK. New York: Springer, 2008.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

1953-, Denyer P. B., ed. Serial-data computation. Boston: Kluwer Academic Publishers, 1988.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Smith, Stewart G. Serial-Data Computation. Boston, MA: Springer US, 1987.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Smith, Stewart G., and Peter B. Denyer. Serial-Data Computation. Boston, MA: Springer US, 1987. http://dx.doi.org/10.1007/978-1-4613-2015-9.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Tretter, Steven A. Communication system design using DSP algorithms: With laboratory experiments for the TMS320C30. New York: Plenum Press, 1995.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Green, D. C. Data communication. Harlow: Longman, 1991.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Serial communication of data"

1

Weik, Martin H. "serial data stream." In Computer Science and Communications Dictionary, 1553. Boston, MA: Springer US, 2000. http://dx.doi.org/10.1007/1-4020-0613-6_17033.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Zheng, Jinji, Wei He, Xicai Li, Huafu Li, Lei Xie, and Jiawei Zhang. "Real-Time Serial Communication Data Collection." In Advances in Intelligent Systems and Computing, 407–11. Cham: Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-65978-7_62.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Jia, Peigang, and Sirui He. "Design of Multichannel Data Real-Time Processing System Based on Serial Port Communication." In Proceedings of the 4th International Conference on Computer Engineering and Networks, 889–95. Cham: Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-11104-9_102.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Li, Ying, Feng Jin, Xiao-xia Xie, and Bing Li. "Research on Anonymous Reconstruction Method of Multi-serial Communication Information Flow Under Big Data." In Lecture Notes of the Institute for Computer Sciences, Social Informatics and Telecommunications Engineering, 57–68. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-67874-6_6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Kanso, A., M. Vette-Steinkamp, and R. Müller. "Development of a Sensitive Winding Application Based on a Serial Robot and Integrated Torque Sensors." In IFIP Advances in Information and Communication Technology, 125–39. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-72632-4_9.

Full text
Abstract:
AbstractConventional winding technologies have already been implemented in the electrical and manufacturing industries. However, the adoption of such technology remains a challenge in the rubber industry, as sensitivity perception is required. A solution to this problem can be achieved by making use of robots equipped with additional sensors. Sensitive robotic applications require accurate force/torque data acquisition. The integration of accurate force/torque sensors is unsatisfactory, moreover a novel method for the processing of the measured data is a requisite. In this paper, a concept for the development of a sensitive winding application based on a serial sensitive robot is presented.
APA, Harvard, Vancouver, ISO, and other styles
6

Hudak, David E., and Santosh G. Abraham. "Contiguous Data Assignments for Neighborhood Communication." In The Kluwer International Series in Engineering and Computer Science, 55–92. Boston, MA: Springer US, 1993. http://dx.doi.org/10.1007/978-1-4615-3164-7_3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Pal, Surjya Kanta, Debasish Mishra, Arpan Pal, Samik Dutta, Debashish Chakravarty, and Srikanta Pal. "Data Communication-Edge, Fog, and Cloud Computing." In Springer Series in Advanced Manufacturing, 293–335. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-81815-9_5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Wijshoff, Harry A. G. "Data Communication and Data Organization in Parallel Computations: Classification and Overview." In The Kluwer International Series in Engineering and Computer Science, 1–31. Boston, MA: Springer US, 1989. http://dx.doi.org/10.1007/978-1-4613-1711-1_1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Bieber, Gerald, Marian Haescher, Niklas Antony, Florian Hoepfner, and Silvio Krause. "Unobtrusive Vital Data Recognition by Robots to Enhance Natural Human–Robot Communication." In Human–Computer Interaction Series, 85–100. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-17107-0_5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Boddington, Paula. "Big Data, Small Talk: Lessons from the Ethical Practices of Interpersonal Communication for the Management of Biomedical Big Data." In Law, Governance and Technology Series, 277–305. Cham: Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-33525-4_13.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Serial communication of data"

1

Zheng, Jinji, Wei He, and Huafu Li. "Real-time data acquisition serial communication." In 6th International Conference on Mechatronics, Materials, Biotechnology and Environment (ICMMBE 2016). Paris, France: Atlantis Press, 2016. http://dx.doi.org/10.2991/icmmbe-16.2016.101.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Madhavi, P., C. Kanagasabapathi, and Siva S. Yellampalli. "Implementation of serial data communication using light." In 2017 International Conference on Electrical, Electronics, Communication, Computer, and Optimization Techniques (ICEECCOT). IEEE, 2017. http://dx.doi.org/10.1109/iceeccot.2017.8284643.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Yuwono, Rudy, and Desriyar Hafidh Pratama. "Design of microstrip antenna for serial data communication." In 2016 22nd Asia-Pacific Conference on Communications (APCC). IEEE, 2016. http://dx.doi.org/10.1109/apcc.2016.7581496.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Hwang-Cherng Chow and Wen-Wann Sheen. "Low power LVDS circuit for serial data communications." In 2005 International Symposium on Intelligent Signal Processing and Communication Systems. IEEE, 2005. http://dx.doi.org/10.1109/ispacs.2005.1595404.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Jun Xiong, Cui Mao, Haoliang Li, Changyou Men, Lenian He, and Xiaolang Yan. "A novel transmitter in high-speed serial data communication." In 2003 5th International Conference on ASIC Proceedings (IEEE Cat No 03TH8690) ICASIC-03. IEEE, 2003. http://dx.doi.org/10.1109/icasic.2003.1277627.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Lee, Sungchul, Kicheol Lee, Sunho Kim, Jinwoo Park, Byungkwon Kang, and Seok Lee. "All-Optical Serial-Parallel Data Converters Using Optical Interferometers." In Optical Fiber Communication Conference. Washington, D.C.: OSA, 2001. http://dx.doi.org/10.1364/ofc.2001.wdd75.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Gerhardt, Don J. "Serial Data Communications Between Microprocessor Systems." In 37th Annual Earthmoving Industry Conference. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 1986. http://dx.doi.org/10.4271/860728.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Walker, D. K., H. Chahryar, J. Chaudri, A. Lodgher, E. Majdalani, and David S. Tucker. "Lectureroom demonstration of serial data communications." In the twenty-third SIGCSE technical symposium. New York, New York, USA: ACM Press, 1992. http://dx.doi.org/10.1145/134510.134563.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Jung, Hyeok-june, Kyeong-sik Park, Cheol-Jin Kim, and Young-Guk Ha. "Formal Modeling and Verification of Serial Communication for Autonomous Vehicles." In 2018 IEEE International Conference on Big Data and Smart Computing (BigComp). IEEE, 2018. http://dx.doi.org/10.1109/bigcomp.2018.00119.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Hossain, Md Muktar, A. H. M. Sarowar Sattar, and Farah Wahida. "Privacy Preserving Serial Publication of Trajectory Data." In 2021 International Conference on Information and Communication Technology for Sustainable Development (ICICT4SD). IEEE, 2021. http://dx.doi.org/10.1109/icict4sd50815.2021.9396989.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Serial communication of data"

1

Schneider, K., and S. Venters. PPP Serial Data Transport Protocol (SDTP). RFC Editor, August 1996. http://dx.doi.org/10.17487/rfc1963.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Tulloch, Olivia, Tamara Roldan de Jong, and Kevin Bardosh. Data Synthesis: COVID-19 Vaccine Perceptions in Africa: Social and Behavioural Science Data, March 2020-March 2021. Institute of Development Studies (IDS), May 2021. http://dx.doi.org/10.19088/sshap.2021.030.

Full text
Abstract:
Safe and effective vaccines against COVID-19 are seen as a critical path to ending the pandemic. This synthesis brings together data related to public perceptions about COVID-19 vaccines collected between March 2020 and March 2021 in 22 countries in Africa. It provides an overview of the data (primarily from cross-sectional perception surveys), identifies knowledge and research gaps and presents some limitations of translating the available evidence to inform local operational decisions. The synthesis is intended for those designing and delivering vaccination programmes and COVID-19 risk communication and community engagement (RCCE). 5 large-scale surveys are included with over 12 million respondents in 22 central, eastern, western and southern African countries (note: one major study accounts for more than 10 million participants); data from 14 peer-reviewed questionnaire surveys in 8 countries with n=9,600 participants and 15 social media monitoring, qualitative and community feedback studies. Sample sizes are provided in the first reference for each study and in Table 13 at the end of this document. The data largely predates vaccination campaigns that generally started in the first quarter of 2021. Perceptions will change and further syntheses, that represent the whole continent including North Africa, are planned. This review is part of the Social Science in Humanitarian Action Platform (SSHAP) series on COVID-19 vaccines. It was developed for SSHAP by Anthrologica. It was written by Kevin Bardosh (University of Washington), Tamara Roldan de Jong and Olivia Tulloch (Anthrologica), it was reviewed by colleagues from PERC, LSHTM, IRD, and UNICEF (see acknowledgments) and received coordination support from the RCCE Collective Service. It is the responsibility of SSHAP.
APA, Harvard, Vancouver, ISO, and other styles
3

Tulloch, Olivia, Tamara Roldan de Jong, and Kevin Bardosh. Data Synthesis: COVID-19 Vaccine Perceptions in Sub-Saharan Africa: Social and Behavioural Science Data, March 2020-April 2021. Institute of Development Studies (IDS), May 2021. http://dx.doi.org/10.19088/sshap.2028.

Full text
Abstract:
Safe and effective vaccines against COVID-19 are seen as a critical path to ending the pandemic. This synthesis brings together data related to public perceptions about COVID-19 vaccines collected between March 2020 and March 2021 in 22 countries in Africa. It provides an overview of the data (primarily from cross-sectional perception surveys), identifies knowledge and research gaps and presents some limitations of translating the available evidence to inform local operational decisions. The synthesis is intended for those designing and delivering vaccination programmes and COVID-19 risk communication and community engagement (RCCE). 5 large-scale surveys are included with over 12 million respondents in 22 central, eastern, western and southern African countries (note: one major study accounts for more than 10 million participants); data from 14 peer-reviewed questionnaire surveys in 8 countries with n=9,600 participants and 15 social media monitoring, qualitative and community feedback studies. Sample sizes are provided in the first reference for each study and in Table 13 at the end of this document. The data largely predates vaccination campaigns that generally started in the first quarter of 2021. Perceptions will change and further syntheses, that represent the whole continent including North Africa, are planned. This review is part of the Social Science in Humanitarian Action Platform (SSHAP) series on COVID-19 vaccines. It was developed for SSHAP by Anthrologica. It was written by Kevin Bardosh (University of Washington), Tamara Roldan de Jong and Olivia Tulloch (Anthrologica), it was reviewed by colleagues from PERC, LSHTM, IRD, and UNICEF (see acknowledgments) and received coordination support from the RCCE Collective Service. It is the responsibility of SSHAP.
APA, Harvard, Vancouver, ISO, and other styles
4

Kang, Myong H., and Ira S. Moskowitz. A Data Pump for Communication,. Fort Belvoir, VA: Defense Technical Information Center, September 1995. http://dx.doi.org/10.21236/ada299994.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Blum, Rick S. Data Fusion With Communication Applications. Fort Belvoir, VA: Defense Technical Information Center, August 2003. http://dx.doi.org/10.21236/ada419530.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Boden, T., T. Karl, C. Williams, Jr., and F. Quinlan. United States Historical Climatology Network (HCN) serial temperature and precipitation data. Office of Scientific and Technical Information (OSTI), January 1990. http://dx.doi.org/10.2172/7247134.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Wendt, Jeremy, Cynthia Phillips, and Arvind Prasadan. Quantifying Graph Uncertainty from Communication Data. Office of Scientific and Technical Information (OSTI), September 2020. http://dx.doi.org/10.2172/1669730.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Eldridge, J. M. Modeling data throughput on communication networks. Office of Scientific and Technical Information (OSTI), November 1993. http://dx.doi.org/10.2172/10113401.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Allen, Phillip L., David P. Gravseth, Michael B. Huffman, Richard W. Hughes, Bradley J. May, Son N. Nguyen, James W. Pinner, Edgar C. Pontejos, Debra R. Reinertson, and Michael J. Roderick. Ship to Shore Data Communication and Prioritization. Fort Belvoir, VA: Defense Technical Information Center, December 2011. http://dx.doi.org/10.21236/ada555274.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Dobbs, Rebecca A., William S. Augerson, Victor E. Middleton, Brenda MacKay, and Rebecca B. Schultz. Aeromedical Data Acquisition and Communication System (AMDACS). Fort Belvoir, VA: Defense Technical Information Center, August 1990. http://dx.doi.org/10.21236/ada228650.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Serial communication of data' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography