Log in

Relevant bibliographies by topics / Serial connection of ultracapacitors / Journal articles

To see the other types of publications on this topic, follow the link: Serial connection of ultracapacitors.

Journal articles on the topic 'Serial connection of ultracapacitors'

Author: Grafiati

Published: 4 June 2021

Last updated: 14 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 journal articles for your research on the topic 'Serial connection of ultracapacitors.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

Kan, Junwu, Kehong Tang, Guojun Liu, Guoren Zhu, and Chenghui Shao. "Development of serial-connection piezoelectric pumps." Sensors and Actuators A: Physical 144, no. 2 (June 2008): 321–27. http://dx.doi.org/10.1016/j.sna.2008.01.016.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Allers, K. H. "Intrinsic and extrinsic reliability of a serial connection of capacitors." Microelectronics Reliability 50, no. 6 (June 2010): 881–86. http://dx.doi.org/10.1016/j.microrel.2010.02.021.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Khaled, Firas, Olivier Ondel, Bruno Allard, and François Buret. "Voltage balancing strategies for serial connection of microbial fuel cells." European Physical Journal Applied Physics 71, no. 1 (July 2015): 10904. http://dx.doi.org/10.1051/epjap/2015150044.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Wong, Ying Qian, Hin Yong Wong, Ching Seong Tan, and Hsin-Fei Meng. "External serial connection without layer patterning for organic solar cells." AIP Advances 6, no. 12 (December 2016): 125028. http://dx.doi.org/10.1063/1.4972202.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Zhang, Jing, and Wei Dong. "Study and Realize of High-Speed Data Transmission System Based on MODEM." Applied Mechanics and Materials 155-156 (February 2012): 77–81. http://dx.doi.org/10.4028/www.scientific.net/amm.155-156.77.

Full text

Abstract:

System uses micro-controller MSP430 as MCU of a whole system, using an embedded MODEM as a MODEM of data of system, MODEM connection with the microcontroller through the serial port, using another chip of microcontroller to implement a serial communication with PC interface in order to achieve the overall system configuration. The innovations of author: system uses the data achieved by MSP430F149 to transmission system,it has some versatility, it is through an embedded MODEM module connection with the UART of microcontroller for data transmission.

APA, Harvard, Vancouver, ISO, and other styles

6

Moonvin Song, Ohkyun Kwon, and Yunmo Chung. "A serial connection technique of speakers for multi-channel audio systems." IEEE Transactions on Consumer Electronics 51, no. 2 (May 2005): 611–16. http://dx.doi.org/10.1109/tce.2005.1468008.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Bobreshov, Anatoly Mikhalovich, Alexey Sergeevich Zhabin, Alexander Dmitrievich Ryazantsev, Vladislav Andreevich Stepkin, and Grigory Konstantinovich Uskov. "Improvement of Ultrashort Pulses by Serial Connection of Step Recovery Diodes." IEEE Microwave and Wireless Components Letters 31, no. 2 (February 2021): 204–6. http://dx.doi.org/10.1109/lmwc.2020.3046925.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Derevyanko, Georgy V., and Vladimir I. Mescheryakov. "IMPROVING THE DESIGNING METHOD OF THERMAL NETWORKS: SERIAL CONNECTION OF STREAMS." Herald of Advanced Information Technology 4, no. 2 (June 30, 2021): 146–54. http://dx.doi.org/10.15276/hait.02.2021.4.

Full text

Abstract:

The paper presents an approach to the design of technical systems, the elements of which are interconnected and carry out an internal exchange of energy. The above analysis showed that for heat-exchange equipment when combining devices into systems, only iterative methods are currently used, a representative of which is Pinch analysis. A limitation of the iterative approach is the impossibility of obtaining an exact solution to such problems, which can only be achieved by analytical methods, which also make it possible to reveal some effects in systems that are practically unavailable for numerical solution. This indicates the absence of a rigorous proof of the existence of a solution and a problem in the construction of approximate solutions, due to the need to involve complementary hypotheses. The topological representation of the system modules allows us to consider the architecture as a network, which contributes to the analysis of the connections between the constituent elements and the identification of their mutual influence. Highlighted the typical connections of network elements such as serial, parallel, contour, which allows to unify the principles of building connections in the system. As an optimality criterion, the NTU parameter was chosen, which includes the heat exchange surface and is usually used when searching for a solution for heat exchangers of moving objects. An analytical solution to the problem of flow distribution and energy exchange efficiency in a system of two series-connected heat exchangers is obtained. His analysis showed that the formulation of the design problem based on the definition of matrix elements in relation to determinants allows not only to meet the requirements for the system, but also to determine the design parameters of its elements that satisfy their extreme characteristics

APA, Harvard, Vancouver, ISO, and other styles

9

Chen, Song, Mai Yu, Junwu Kan, Jianping Li, Zhonghua Zhang, Xinyi Xie, and Xiaomin Wang. "A Dual-Chamber Serial–Parallel Piezoelectric Pump with an Integrated Sensor for Flow Rate Measurement." Sensors 19, no. 6 (March 25, 2019): 1447. http://dx.doi.org/10.3390/s19061447.

Full text

Abstract:

A new concept of a dual-chamber serial-parallel piezoelectric pump with an integrated sensor (DSPPIS) is presented in this paper. By means of dividing a piezoelectric bimorph into an actuator and a sensor, sensing function is integrated onto the DSPPIS for flow rate measurement. A prototype of the DSPPIS was manufactured and assembled from a finished piezoelectric bimorph. Then, frequency and voltage characteristics were tested to evaluate the performance of the DSPPIS with serial and parallel connection. Experimental results show that the optimal frequency range of DSPPIS can be achieved and determined by itself through monitoring the sensing voltage when driven by a fixed voltage of 150 Vpp and a frequency range of 40–400 Hz. For a fixed frequency of 100 Hz and a voltage range of 50–250 Vpp, both the sensing voltage and output flow rate increase with the increase of driving voltage. It is observed that there is a positive correlation between sensing voltage and output flow rate, which was further fitted by using linear function. The correlation coefficients for the DSPPIS with serial and parallel connection are calculated as 0.9716 and 0.9054, respectively. As a result, the DSPPIS demonstrated in this paper has realized the measurement of flow rate without the additional flow-sensing equipment both in serial and parallel connection.

APA, Harvard, Vancouver, ISO, and other styles

10

-Elpelt, R. "Serial connection of SiC VJFETs - features of a fast high voltage switch." Revue de l'Electricité et de l'Electronique -, no. 02 (2004): 60. http://dx.doi.org/10.3845/ree.2004.018.

Full text

APA, Harvard, Vancouver, ISO, and other styles

11

Rusnačko, Rastislav, and Ivan Žežula. "Connection between uniform and serial correlation structure in the growth curve model." Metrika 79, no. 2 (June 4, 2015): 149–64. http://dx.doi.org/10.1007/s00184-015-0549-5.

Full text

APA, Harvard, Vancouver, ISO, and other styles

12

Kim, Hee Sook Park, S. B. Cho, Bon Soon Koo, Jong Myong Kim, Hae Won Cheong, Eul Jae Yoon, Byung Tae Ryu, Sang Jin Lee, Byung Ju Lim, and Young Ok Ko. "Development of a High Power Li/SOCl₂ Reserve Battery." Key Engineering Materials 277-279 (January 2005): 625–30. http://dx.doi.org/10.4028/www.scientific.net/kem.277-279.625.

Full text

Abstract:

We have tried to develop a lithium/thionyl chloride reserve battery (560W). A cell consists of 5 double-sided cathodes and anodes (toroidal shape, electrode area: 100 cm2, cell surface area: 900 cm2, current density: 22mA/cm2). We have designed a unique internal serial connection, which is capable of obtaining a desired voltage by simply stacking the cells and then tightening the internal serial connection volts. A piston-type electrolyte reservoir is designed. Our dual-piston electrolyte reservoir requires smaller space for the piston movement than a single-piston reservoir. It also renders reliable opening of the diaphragm, and appropriate electrolyte transferring speed to avoid damage to the carbon electrodes. The batteries underwent performance tests, environmental tests, and accelerated aging test.

APA, Harvard, Vancouver, ISO, and other styles

13

Hasan Mammadtagiyeva, Tarana. "Use of the computer in the course of teaching the topic "Serial wire connection" in the vii grade to build practical skills of pupils." SCIENTIFIC WORK 61, no. 12 (December 25, 2020): 98–105. http://dx.doi.org/10.36719/2663-4619/61/98-105.

Full text

Abstract:

The article shows how to develop students' practical skills using computers. As an example, the method of using the Vocational Laboratory Crocodile Phyiscs has been described in the topic of "Serial wire connection". Through this program, the students learn to experimentally apply the regularity of coupled wires. By means of the program, the students also will be introduced to the demonstration of a consistent wiring before the research, and will be informed about the work they will do. At the same time, the article provides a model of work flow in measuring the intensity and tension of the consecutive coupled wires. The dimensions of the lamp, the ampermeter, and the voltmeter according to Duist are clearly stated in the scheme. Key words: Computer, electrical circuit, electric current, voltage,resistance, serial connection,practical skills.

APA, Harvard, Vancouver, ISO, and other styles

14

Koklu, Nigmet, Dundar Yener, and Hamdi Sukur Kilic. "Designing Animations in the Matter of Connection of Serial and Parallel of Batteries." International Journal of Applied Mathematics, Electronics and Computers 4, no. 2 (April 12, 2016): 50. http://dx.doi.org/10.18100/ijamec.43560.

Full text

APA, Harvard, Vancouver, ISO, and other styles

15

Yuksel, Heba, and Ömer Altunay. "Host-to-host TCP/IP connection over serial ports using visible light communication." Physical Communication 43 (December 2020): 101222. http://dx.doi.org/10.1016/j.phycom.2020.101222.

Full text

APA, Harvard, Vancouver, ISO, and other styles

16

Dahlmann, Martin, Chaoqing Min, and Thomas Sattel. "A note on a double-serial switch-spring-parallel semi-active connection element." PAMM 17, no. 1 (December 2017): 369–70. http://dx.doi.org/10.1002/pamm.201710154.

Full text

APA, Harvard, Vancouver, ISO, and other styles

17

Kang, Dong Hoon, Jong Woo Kim, Sung Hwan Kim, Seong Ho Moon, Jun Ho Yang, Jae Jun Jung, Ho Jeong Cha, et al. "The serial connection of two extracorporeal membrane oxygenators for patient with refractory hypoxemia." Heart & Lung 50, no. 6 (November 2021): 853–56. http://dx.doi.org/10.1016/j.hrtlng.2021.07.006.

Full text

APA, Harvard, Vancouver, ISO, and other styles

18

Handke, Artur. "SIMPLIFIED COLLISION DETECTION IN 4R SERIAL MANIPULATORS." Acta Mechanica et Automatica 7, no. 1 (March 1, 2013): 11–14. http://dx.doi.org/10.2478/ama-2013-0002.

Full text

Abstract:

Abstract This paper concerns the problem of designating criteria for assessing the possibility of a collision between the elements of serial manipulators with three rotary joints allowing to flex the segments in common plane oriented by rotating the fourth connection. The issue of contactless and efficient functioning of described group of manipulators has been considered in the spatial system. Equations were derived determining the possibility of a collision between selected segments of both manipulators. Collision detection model isn’t based on the information from the tactile sensors, but only on the relative position between the segments of manipulators. Based on the parameters defining the collision, the search for method of impossible collision was set on designing level, in order to minimize the time needed to examine all possible scenarios of collisions between segments. The results were included in development of methods and algorithms for planning and controlling movements of finger modules in anthropomorphic manipulator during grasping objects of indeterminate shape.

APA, Harvard, Vancouver, ISO, and other styles

19

Bidabad, Bijan. "Serial commitments clearance in Rastin Banking." International Journal of Law and Management 57, no. 6 (November 9, 2015): 600–609. http://dx.doi.org/10.1108/ijlma-02-2015-0007.

Full text

Abstract:

Purpose – This paper aims to propose a system for settlement of obligations of those who, on the one hand, serially owe someone and, on the other hand, are creditors to other persons. Serial Commitments Clearance (SCC) system provides the necessary arrangements for this purpose. Design/methodology/approach – Theoretical discussions of serial chain of debits and credits were conducted by considering the laws and regulations of commitment clearance. Findings – By considering laws and regulations of commitment clearance and introducing theory of serial chain of debits and credits, this system proposes an algorithm for recognition of serial commitments. Research limitations/implications – This process is set in connection to the Collateral Registration System and Mortgage Securitization System in Rastin Banking, while considering the legal and operational problems. Accordingly, banks, notary offices and other authorized authorities can clear serial obligations of persons due to their requests and agreements and release their collaterals and guarantees as far as the debts of the persons are equivalent. Practical implications – This system will cause financial release and efficiency of many economic firms. In addition, banks will gain commission for rendering this service. Social implications – SCC is a model that can be used in all countries, especially those which have more uncertainties and traders need more pledges for their transactions. Originality/value – This study fulfils an identified need to solve practical legal problems in vindication of rights.

APA, Harvard, Vancouver, ISO, and other styles

20

Lim, Seung-Gag. "Convergence Speed Improvement in MMA Algorithm by Serial Connection of Two Stage Adaptive Equalizer." Journal of The Institute of Internet, Broadcasting and Communication 15, no. 3 (June 30, 2015): 99–105. http://dx.doi.org/10.7236/jiibc.2015.15.3.99.

Full text

APA, Harvard, Vancouver, ISO, and other styles

21

Kaas, Jon H., and Preston E. Garraghty. "Hierarchical, parallel, and serial arrangements of sensory cortical areas: connection patterns and functional aspects." Current Opinion in Neurobiology 1, no. 2 (August 1991): 248–51. http://dx.doi.org/10.1016/0959-4388(91)90085-l.

Full text

APA, Harvard, Vancouver, ISO, and other styles

22

Paulista, Paulo P., Maria Virginia T. Santana, Antonio T. M. Henriques Neto, and Valmir F. Fontes. "New approach in partial cavopulmonary connection." Cardiology in the Young 8, no. 3 (July 1998): 364–67. http://dx.doi.org/10.1017/s1047951100006880.

Full text

Abstract:

AbstractThe development of pulmonary atteriovenous fistulas after bidirectional cavopuomonary operat-tions, such as the bidirectional Glenn shunt and Kawashima's procedure, has raised concern. Development of these fistulas, which are more frequent than initially thought, can represnt a limiting factor in the late outcome of these patients and may even limit the indication for these of surgery. Whether the fistulas can be reversed by transforming the surgical procedures has yet to be established. In the hope of avoiding this kind of complication, thought to be caused by the lack of passage of a hypothetical hepatic factor through the pulmonary circulation. wedevelped an inverred type of gidirectional cavopulmonary connection in which the blood coming from the liver perfuses immediately both lungs. This is made possi-ble by shuntiong via an intra-atrial tunnel the blood from the superior caval vein directly to the left atrium, and the blood from the inferior caval vein to the right branch of the pulmonary trunk (keeping its bifurcation intact). We describe findings in two patients undergoing successful surgery with this technique. Serial follow -up with cohtrast echocardiography did not show evidence of arteriovenous pulmonary fistulas.Despite our numbers being small, and the time of follow-up being limited, we believe that it is importantto document these and similar cases

APA, Harvard, Vancouver, ISO, and other styles

23

Norman, Frederick. "Digital to Analog: Exploring Digital Processes of Making." International Journal of Architectural Computing 3, no. 2 (June 2005): 191–202. http://dx.doi.org/10.1260/1478077054214398.

Full text

Abstract:

This focus this paper is the translation of a digital information model that defines an object's surface properties and its connection to that which is real or physical. This research, while early in its investigation, seeks to explore architecture and digital design as a material process. The direct connection to output devices such as computer-numerically controlled routers provide a unique opportunity for controlled variation and serial differentiation and seeks to exploit mass customization rather than standardization. Through a series of studies the process from design to machine file to finish product is explored. This connection to digitally driven fabrication equipment creates within the design process an opportunity to realize ones designs both digitally and materially.

APA, Harvard, Vancouver, ISO, and other styles

24

Wu, Xun, Yue Song Mei, Jian Qiao Yu, Tian Peng Yu, and Jing Xu Li. "A Design of UART Serial Communication between the TMS320C6748 DSP and PC." Applied Mechanics and Materials 380-384 (August 2013): 3657–60. http://dx.doi.org/10.4028/www.scientific.net/amm.380-384.3657.

Full text

Abstract:

The digital signal processor (DSP: Digital Signal Proceeding) are widely used in industrial, military, communications and the other fields, so the research and design work about DSP is one of the hot spots of scholars and research. Communication and data transfer between the DSP and peripherals is one of the DSP function in the process of using which is the basic but important. This paper introduces a TMS320C6748 DSP with PC serial communication method based on the UART module. The hardware connection and software programming were highlights description. Finally, this paper gives some key code about TMS320C6748 DSP and PC serial communication programming.

APA, Harvard, Vancouver, ISO, and other styles

25

Zatkalik, Miloš. "The Aggregate or Have the Notes Lost Orientation?" Musicological Annual 44, no. 2 (December 1, 2008): 69–86. http://dx.doi.org/10.4312/mz.44.2.69-86.

Full text

Abstract:

The aggregate and the process of its completion introduce goal-directed motion into a non-tonal and (usually) non-serial work. This can delimit its syntactic or formal units, provide connection between them, or articulate its tension-release patterns. The completion process is either successive or simultaneous, sometimes divided between textural layers with distinct functions.

APA, Harvard, Vancouver, ISO, and other styles

26

Wang, Xin, Chang Jiu Jiang, Kao Zhong Zhao, and Xiang Rui Chen. "Experimental Study on Fire Resistance Properties of Post-Installed Rebar Connection." Advanced Materials Research 671-674 (March 2013): 1877–82. http://dx.doi.org/10.4028/www.scientific.net/amr.671-674.1877.

Full text

Abstract:

A serial of fire tests have been conducted to study the fire resistance of the post-installed rebar connection with organic adhesive. Research variables include three kinds of anchorage depth. Loads are applied to specimens through lever and remain a constant throughout the whole process of the tests. The temperatures of connections are elevated following the ISO834 curve and the failure is controlled by excessive deflection of bonded-in rebar beams. The test results show that anchorage depth has a great influence on the performance of bonded-in rebar beams exposed to fire. Beams using organic adhesive fail suddenly with obvious rebar slip, and behave with poor fire endurance.

APA, Harvard, Vancouver, ISO, and other styles

27

Chen, Hao-Hsuan, Lang Zeng, Weisheng Zhao, and Yaowen Liu. "Phase-Locking of Spin-Torque Nano-Oscillator Pairs by Magnetic Dipolar Coupling in Electrical Serial Connection." SPIN 08, no. 03 (September 2018): 1850013. http://dx.doi.org/10.1142/s2010324718500133.

Full text

Abstract:

Synchronization of spin-torque nano-oscillators (STNOs) by magnetic dipolar interactions in a parallel electrical connection (PC) introduces the technological possibility for an enhancement of output signal. In this study, we consider two identical or nonidentical STNOs in serial electrical connection (SC). By using a pendulum-like approximation model, we analytically predict the dipolar coupling strength, critical current and frequency of phase-locking precession. The numerical calculations of those analytical expressions are confirmed by macrospin simulations, revealing that the dipolar coupling strength responsible for the phase-locking in SC case is three times larger than that in the PC case for the two STNOs with the same separation, which results in the enlarged and symmetric phase-locking window of frequency versus current. These results suggest that the SC of multiple STNOs could be more promising for the enhancement of output power.

APA, Harvard, Vancouver, ISO, and other styles

28

Berdyyeva, Tamara K., and Carl R. Olson. "Relation of ordinal position signals to the expectation of reward and passage of time in four areas of the macaque frontal cortex." Journal of Neurophysiology 105, no. 5 (May 2011): 2547–59. http://dx.doi.org/10.1152/jn.00903.2010.

Full text

Abstract:

Neurons in several areas of the monkey frontal cortex exhibit rank selectivity, firing differentially as a function of the stage attained during the performance of a serial order task. The activity of these neurons is commonly thought to represent ordinal position within the trial. However, they might also be sensitive to factors correlated with ordinal position including time elapsed during the trial (which is greater for each successive stage) and the degree of anticipation of reward (which probably increases at each successive stage). To compare the influences of these factors, we monitored neuronal activity in the supplementary motor area (SMA), presupplementary motor area (pre-SMA), supplementary eye field (SEF), and dorsolateral prefrontal cortex during the performance of a serial order task (requiring a series of saccades in three specified directions), a variable reward task (in which a cue displayed early in the trial indicated whether the reward received at the end of the trial would be large or small), and a long delay task (in which the monkey had simply to maintain fixation during a period of time approximating the duration of an average trial in the serial order task). We found that rank signals were partially correlated with sensitivity to elapsed time and anticipated reward. The connection to elapsed time was strongest in the pre-SMA. The connection to anticipated reward was most pronounced in the SMA and SEF. However, critically, these factors could not fully explain rank selectivity in any of the areas tested.

APA, Harvard, Vancouver, ISO, and other styles

29

Donato, Paola, Paola Dugo, Francesco Cacciola, Giovanni Dugo, and Luigi Mondello. "High peak capacity separation of peptides through the serial connection of LC shell-packed columns." Journal of Separation Science 32, no. 8 (April 2009): 1129–36. http://dx.doi.org/10.1002/jssc.200800639.

Full text

APA, Harvard, Vancouver, ISO, and other styles

30

Sun, Jin Sheng, and Jun Xu Wei. "Research and Implementation of Web Control for PLC with PPI Protocol." Applied Mechanics and Materials 401-403 (September 2013): 1939–43. http://dx.doi.org/10.4028/www.scientific.net/amm.401-403.1939.

Full text

Abstract:

Hardware connection and software implementation of communication are designed between the S7-200 PLC and Ethernet. Hardware composition is introduced and low-power microprocessor S3C2440 is selected as the control chip, DM9000 as Ethernet control chip, serial port RS-232 as testing interface. Monitoring page is designed to show the status of PLC. PPI protocol is known by analysing the communication process of S7-200 with PC. Embedded web server Boa is transplanted and CGI program is developed in Linux embedded operating system. It can realize the function of reading and writing I/O value and simulation value. The experiment shows that the system can realize reliable serial communication. It brings a great convenience to work.

APA, Harvard, Vancouver, ISO, and other styles

31

Wang, Xiu Qing, Lei Song, Zhao Na, and Xian Zhang. "Study of the NC Machine’s Connection and Assembly Management System Based on RFID Technology." Advanced Materials Research 403-408 (November 2011): 2317–20. http://dx.doi.org/10.4028/www.scientific.net/amr.403-408.2317.

Full text

Abstract:

This article takes the management system of NC machine’s connection and assembly as a research object, and introduce RFID technology as well as the application of RFID. It establishes basic information management of NC machine, marking information management, assembly information management, serial communication and other functional modules. Then design engineering framework-a kind of visual management user interface- in VC platform. At last, it needs to do the mapping coefficient and data transmitting from the engineering framework to database by ADO database access.

APA, Harvard, Vancouver, ISO, and other styles

32

Berdahl, Edgar, and Alexandros Kontogeorgakopoulos. "The FireFader: Simple, Open-Source, and Reconfigurable Haptic Force Feedback for Musicians." Computer Music Journal 37, no. 1 (March 2013): 23–34. http://dx.doi.org/10.1162/comj_a_00166.

Full text

Abstract:

The FireFader is a simple haptic force-feedback device that is optimized for introducing musicians to haptics. It is based upon a single-degree-of-freedom potentiometer fader coupled to a DC motor, also known as a “motorized fader.” A light is connected in parallel with the motor to help communicate the force's strength visually. The FireFader consists of only open-source hardware and open-source software elements. Consequently, it is relatively easy for users to repurpose it into new projects involving varying kinds and numbers of motors and sensors. An open-source device driver for the FireFader allows it to be linked to a computer via USB so that the computer can perform the feedback control calculations. For example, the computer can simulate the acoustics of a virtual musical instrument to concurrently synthesize sound and calculate the motor force as a function of the fader position. The serial connection over USB increases the latency of the control signal compared to embedded implementations, but the serial connection facilitates easier programming via the computer, and the force feedback can be automatically disabled when the user is not touching the fader. Some new devices derived from the FireFader design are presented.

APA, Harvard, Vancouver, ISO, and other styles

33

Pil'gunov, V. N., and K. D. Yefremova. "Volumetric hydraulic drive with series connection of hydraulic actuators." Izvestia MGTU MAMI 1, no. 4 (2020): 61–69. http://dx.doi.org/10.31992/2074-0530-2020-46-4-61-69.

Full text

Abstract:

The aim of the proposed work is theoretical and experimental studies of the performance of a single-channel hydraulic drive with a series connection of executive hydraulic cylinders and the de-velopment of recommendations for predicting their characteristics. The authors of the paper carried out a set of experimental studies and obtained the numerical kinematic, speed and power characteristics of a single-channel hydraulic drive with five hydraulic cylinders connected in series. It is shown that the nature of the kinematic connection is determined by the differentiation of the hydraulic cylinders. The speed of advancement of the piston of an indi-vidual hydraulic cylinder is determined by its serial number in the chain of hydraulic cylinders, while the highest speed of the piston movement is developed by the first hydraulic cylinder. The relative unevenness of the piston movement in comparison with the speed of the piston movement of the first hydraulic cylinder is determined by the differentiation of the hydraulic cylinder, while the hydraulic drive with the differentiation D = 2 has the greatest unevenness. It is shown that by the selection of the differentiation of the hydraulic cylinders, their stepwise arrangement and the displacement of the location of the bottom of the hydraulic cylinder, that it is possible to realize complex forms of the total trajectory of the points of attachment of the hydraulic cylinder rods. In the hydrostatic (power) hydraulic drive in the rod cavities of the hydraulic cylinders, depend-ing on the serial number of the hydraulic cylinder, the thrust on its rod and the differentiation set different pressure levels, and the lowest pressure will be in the piston cavity of the last hydraulic cylinder. With uniformly loaded hydraulic cylinders, the pressure in the piston cavities depends only on the number of the hydraulic cylinder and its differentiation. In a hydraulic drive with hydraulic cylinders of equal power, the last hydraulic cylinder will develop the greatest force at the lowest piston speed. In addition, the work also shows that the reproducibility of the positions of unloaded rods of hy-draulic cylinders of equal differentiation is not less than 1%. As a result of the experimental studies, a method was developed for the design of a volumetric hydraulic drive with sequential switching on of executive hydraulic cylinders, which can be used to solve the problems of hydrofication of me-chanical engineering production (bending presses, sheet stamping), in shipbuilding (ship slipways), in flexible production systems, industrial and warehouse logistics.

APA, Harvard, Vancouver, ISO, and other styles

34

Wang, Jing Feng, Xin Yi Chen, and Lin Hai Han. "Structural Behaviour of Blind Bolted Connection to Concrete-Filled Steel Tubular Columns." Advanced Materials Research 163-167 (December 2010): 591–95. http://dx.doi.org/10.4028/www.scientific.net/amr.163-167.591.

Full text

Abstract:

This paper studies structural behaviour of the blind bolted connections to concrete-filled steel tubular columns by a serial of experimental programs, which conducted involving eight sub-assemblages of cruciform beam-to-column joints subjected to monotonic loading and cyclic loading. The moment-rotation hysteretic relationships and failure models of the end plate connections have been measured and analyzed. A simplified analysis model for the blind bolted connections is proposed based on the component method. It is concluded that the blind bolted end plate connection has reasonable strength and stiffness, whilst the rotation capacity of the connection satisfies the ductility requirements for earthquake-resistance in most aseismic regions. This typed joint has excellent seismic performance, so it can be used in the moment-resisting composite frame.

APA, Harvard, Vancouver, ISO, and other styles

35

Dobkiewicz-Wieczorek, Ewa. "Influence of three surface condensers connection setup on power plant unit performance." E3S Web of Conferences 137 (2019): 01027. http://dx.doi.org/10.1051/e3sconf/201913701027.

Full text

Abstract:

This paper presents a comparison of three surface condenser connection setups on the cooling water side. Serial, mixed and parallel connections were considered. The thermodynamic justification for the use of more complex configurations was verified. The analysis was conducted based on the calculated heat balances of verified power units for nominal and not nominal parameters for tested connections. The exhaust steam pressure was calculated using the technical data of the surface condenser and cooling water parameters. Three methods of calculating the heat transfer coefficient based on characteristic numbers, HEI method, and the ASME standard, were used. The most advantageous model was indicated and used in heat balance calculations. The assumptions and simplifications for the calculations are discussed. Examples of the calculation results are presented.

APA, Harvard, Vancouver, ISO, and other styles

36

Shevchenko, Andrii A., Mykola M. Zipunnikov, Аnatolii L. Kotenko, and Natalia A. Chorna. "Investigation of the Electrolysis Process of Obtaining Hydrogen and Oxygen with Serial and Parallel Connection of Electrons." Journal of Mechanical Engineering 23, no. 4 (December 30, 2020): 63–71. http://dx.doi.org/10.15407/pmach2020.04.063.

Full text

Abstract:

This paper presents theoretical and experimental studies of the process of electrochemical generation of hydrogen and oxygen with a parallel and serial connection of electrodes in one electrolyte volume. This study is based on the laws of conservation of mass, thermodynamics, electrical engineering, electrochemistry, using data obtained from the methods of mathematical and physical modeling. Data on the development and research of two designs of electrode assemblies, namely, with a parallel and series connection of electrodes, and with the subsequent placement of each assembly in one electrolyte volume. Experimental and calculated data revealed the regularities of the electrochemical reaction of decomposition of the liquid electrolyte into hydrogen and oxygen, the distribution of voltage when the electrodes are connected in parallel and in series in one electrolyte volume. A change in the electric potential between the internal electrodes was also found. Voltage measurement was performed from electrode 1 to electrode 4. The results of experimental studies were displayed graphically. The graphs show that the voltage at the terminals of the internal electrodes is lower than necessary for the electrochemical reaction of decomposition of the liquid electrolyte with the generation of gaseous hydrogen and oxygen. To implement the concept of placing a series (bipolar) connection of electrodes in one electrolyte volume, it is necessary to focus on the design of the electrolyzer that will be able to disconnect the electrodes electrically and provide galvanic isolation between them (separately isolated electrolyte volumes for each electrode pair). This will increase the operating pressure of the generated hydrogen and oxygen to 20.0 MPa, reducing the current load of the electrolysis process when using alternative energy sources.

APA, Harvard, Vancouver, ISO, and other styles

37

Long, Guang Li. "Design of GPRS Based on MCU STC12C5A60S2." Applied Mechanics and Materials 130-134 (October 2011): 4028–31. http://dx.doi.org/10.4028/www.scientific.net/amm.130-134.4028.

Full text

Abstract:

The MCU has the smaller volume, low cost, face control, antijamming ability strong and so on merits, GPRS is based on the GSM development foundation in data traffic. one kind of GPRS system Has been designed by using MCU STC12C5A60S2, it including correspondence transformation connection, SIM300 module, MCU, display circuit, keyboard electric circuit, RS232 exterior serial communication connection and so on. The related hardware welding on the PCB, the software programming after-burning writes in the MCU, inserts the liquid crystal display monitor and the SIM card, joins the receiver and the microphone, connects the good GPRS antenna. On the electricity, the establishment correspondence transformation connection, may realize the close-down, the dial and the answering telephone, transmits and receives the SMS, to receive and dispatch E-mail, carries on the Internet to glance over and so on, indicated that has achieved the design requirements.

APA, Harvard, Vancouver, ISO, and other styles

38

Araki, Takuto, Takahiro Ohba, Shinya Takezawa, Kazuo Onda, and Yoshinori Sakaki. "Cycle analysis of planar SOFC power generation with serial connection of low and high temperature SOFCs." Journal of Power Sources 158, no. 1 (July 2006): 52–59. http://dx.doi.org/10.1016/j.jpowsour.2005.09.003.

Full text

APA, Harvard, Vancouver, ISO, and other styles

39

Nose, Toshiaki, and Susumu Sato. "Flip-Flop and Oscillating Behavior Obtained with Serial Connection of Liquid Crystal Bistable Optical Device Pixels." Japanese Journal of Applied Physics 33, Part 2, No. 4A (April 1, 1994): L517—L519. http://dx.doi.org/10.1143/jjap.33.l517.

Full text

APA, Harvard, Vancouver, ISO, and other styles

40

Lee, Hsin-Che, Yin-Wen Lee, Jiun-Shin Chang, and Shien-Kuei Liaw. "Single-Longitude-Mode Fiber Laser Implementation by Using Only Two Subring Cavities in Serial/Parallel Connection." Fiber and Integrated Optics 38, no. 4 (July 4, 2019): 236–46. http://dx.doi.org/10.1080/01468030.2019.1637482.

Full text

APA, Harvard, Vancouver, ISO, and other styles

41

Safari, Ashkan, and Mehran Sabahi. "Practical data connection between MATLAB and microcontrollers using virtual serial port and MicroPython Pyboard: A survey." IET Circuits, Devices & Systems 15, no. 5 (March 9, 2021): 485–92. http://dx.doi.org/10.1049/cds2.12038.

Full text

APA, Harvard, Vancouver, ISO, and other styles

42

Akçabozan Taşkiran, Aylin, and Can Şakir Binan. "Transnational Serial Architectural Heritage in Turkey: Traces of the Roman Empire via Egnatia." ATHENS JOURNAL OF ARCHITECTURE 7, special issue (March 1, 2021): 117–36. http://dx.doi.org/10.30958/aja.7-0-1.

Full text

Abstract:

The term “Transnational Serial Property” generally refers to expansive World Heritage sites, which extend across the territory of two or three UNESCO Convention member states. Transnational serial properties provide various cultural and natural qualities as well as a number of local, regional and national series of nominations in World Heritage. Serial Nominations consist of more components that developed jointly in cultural connections. Each individual element is not only in unique universal value, but also the series as whole have the cultural integrity. However, in today’s world, the speed of globalization creates severe problems on World Heritage areas such that the current trends unfortunately suggest an increasing depreciation through existing cultural heritage. There are numerous potential Transnational Serial World Heritage properties in Turkey, many of existing cultural routes. At this point, by highlighting the need for re-evaluation of traces of the Roman Empire as a Transnational Serial architectural heritage, this paper explains the critical discussion of World Heritage areas which should be evaluated as a Serial Transnational Architectural Heritage. An example of this is the Via Egnatia, a road constructed by the Romans in the 2nd century BC, was the first Roman highway to be built east of the Adriatic. It passes through the Roman provinces of Illyricum, Macedonia, and Thrace, running through territory that is now part of modern Albania, the Republic of Macedonia, Greece, and European Turkey. The research study aims to provide a framework for the Transnational Serial World Heritage properties in general and mainly focuses on traces of the Roman Empire and cultural routes. Within the context of the cultural routes, Via Egnatia and the need for evaluation as a serial hybrid heritage by concerning preservation of historical, archeological and other values will be discussed. Connected to the information gathered, the paper finalized with a summary on Transnational Serial Nomination system and the transformation of the historical road as a cultural and communicational connection from past to present.

APA, Harvard, Vancouver, ISO, and other styles

43

Li, Fanjia, Juanjuan Li, Aichun Zhu, Yonggang Xu, Hongsheng Yin, and Gang Hua. "Enhanced Spatial and Extended Temporal Graph Convolutional Network for Skeleton-Based Action Recognition." Sensors 20, no. 18 (September 15, 2020): 5260. http://dx.doi.org/10.3390/s20185260.

Full text

Abstract:

In the skeleton-based human action recognition domain, the spatial-temporal graph convolution networks (ST-GCNs) have made great progress recently. However, they use only one fixed temporal convolution kernel, which is not enough to extract the temporal cues comprehensively. Moreover, simply connecting the spatial graph convolution layer (GCL) and the temporal GCL in series is not the optimal solution. To this end, we propose a novel enhanced spatial and extended temporal graph convolutional network (EE-GCN) in this paper. Three convolution kernels with different sizes are chosen to extract the discriminative temporal features from shorter to longer terms. The corresponding GCLs are then concatenated by a powerful yet efficient one-shot aggregation (OSA) + effective squeeze-excitation (eSE) structure. The OSA module aggregates the features from each layer once to the output, and the eSE module explores the interdependency between the channels of the output. Besides, we propose a new connection paradigm to enhance the spatial features, which expand the serial connection to a combination of serial and parallel connections by adding a spatial GCL in parallel with the temporal GCLs. The proposed method is evaluated on three large scale datasets, and the experimental results show that the performance of our method exceeds previous state-of-the-art methods.

APA, Harvard, Vancouver, ISO, and other styles

44

Remiorz, Leszek, Grzegorz Wiciak, and Krzysztof Grzywnowicz. "Investigation of Applicability of Polyimide Membranes for Air Separation in Oxy-MILD Zero-Emission Power Plants." E3S Web of Conferences 137 (2019): 01033. http://dx.doi.org/10.1051/e3sconf/201913701033.

Full text

Abstract:

Primary element of an oxy-combustion plants is ambient air separation unit. This paper presents the results of experimental research concerning the parameters of the separation of N2/O2 from ambient air, using capillary polymer membranes, potentially applicable in oxy-combustion technology, under variable operational conditions. Collected data were utilized to approximate continuous functions describing the variability of essential parameters of the air separation based on such membranes. The functions were introduced to develop a complete mathematical model of the separation unit, intended to be applied in oxy-Moderate or Intense Low Oxygen Dilution (oxy-MILD) zero-emission plants. Computational analyses were performed for three variants of the unit’s configuration: serial connection of membrane modules, unit with retentate recirculation and unit with permeate recirculation. The results of the research, in the form of sets of characteristic curves, depicting parameters of the separation process as a function of the variable operational conditions, show that crucial differences to the subsequent separation parameters (permeate purity, real selectivity coefficient, recovery coefficient) and with regard to the power consumed, were obtained. The highest parameters of the module were gained for serial connection, whereas the lowest – for permeate recirculation. The lowest energy consumption was acquired for the retentate recirculation variant.

APA, Harvard, Vancouver, ISO, and other styles

45

Liu, Zixin, Shu Lv, Shouming Zhong, and Mao Ye. "New Improved Exponential Stability Criteria for Discrete-Time Neural Networks with Time-Varying Delay." Discrete Dynamics in Nature and Society 2009 (2009): 1–23. http://dx.doi.org/10.1155/2009/874582.

Full text

Abstract:

The robust stability of uncertain discrete-time recurrent neural networks with time-varying delay is investigated. By decomposing some connection weight matrices, new Lyapunov-Krasovskii functionals are constructed, and serial new improved stability criteria are derived. These criteria are formulated in the forms of linear matrix inequalities (LMIs). Compared with some previous results, the new results are less conservative. Three numerical examples are provided to demonstrate the less conservatism and effectiveness of the proposed method.

APA, Harvard, Vancouver, ISO, and other styles

46

Shаymamоv, B., D. Rahmatov, M. Khоlмurоdоv, A. Mukhtorov, and M. Rаkhmamоvа. "Probe of process of multiple-loop chains of parallel and consecutive joints." E3S Web of Conferences 216 (2020): 01142. http://dx.doi.org/10.1051/e3sconf/202021601142.

Full text

Abstract:

The article describes the formation of low-frequency currents in ferromagnetic oscillatory circuits. As a result of parallel and serial connection of multi-loop ferroresonance circuits, the frequencies of harmonics of the second-order amplitude of soft excitation are considered. Each of the schemes in the article is analyzed, and taking into account the industrial use of frequency converters, it makes it possible for further research on the production of frequency converters.

APA, Harvard, Vancouver, ISO, and other styles

47

Long, Guang Li. "Design of GPS Based on Single Chip Microcomputer." Advanced Materials Research 403-408 (November 2011): 2192–95. http://dx.doi.org/10.4028/www.scientific.net/amr.403-408.2192.

Full text

Abstract:

In order to go on a journey conveniently, the STC89C52 SCM is used, one kind of GPS user terminal is designed, it including GM-89 GPS module, communications and transformation connection, control processing electric circuit, display circuit, RS232 exterior serial communication connection and so on. The related hardware welding on the PCB, the software programming After-Burning writes in the SCM, inserts the TFT colored tablet (or 12864 liquid crystals) and outside sets at the type GPS antenna. On the electricity, demonstrated the longitude, latitude, time and altitude above sea level and so on information, after access the internet to consult the local latitude and longitude information to carry on compared to rightly, the result is correct, indicated that has achieved the design requirements.

APA, Harvard, Vancouver, ISO, and other styles

48

Xu, Jin, and Hong Wei Lu. "The Research on Port Loop Detection Method of IEEE1394 Physical Layer." Applied Mechanics and Materials 556-562 (May 2014): 2607–10. http://dx.doi.org/10.4028/www.scientific.net/amm.556-562.2607.

Full text

Abstract:

IEEE1394 is a high performance serial bus, which physical layer directly to transmit and receive data with other nodes. when the ports of physical layer connect to other nodes, The connection which is not allowed may be activated. so there may be a loop formed in a bus topology ,which may influence the normal work of system. This paper analyzes the causes of the physical layer interface to form a loop, and introduces the method of port loop detection.

APA, Harvard, Vancouver, ISO, and other styles

49

DING, Mingyu, Yoshihito SUZUKI, and Hitoshi KOIZUMI. "Elution characteristics of cations in serial connection of a cation exchange column and an anion exchange column." Bunseki kagaku 43, no. 2 (1994): 117–23. http://dx.doi.org/10.2116/bunsekikagaku.43.117.

Full text

APA, Harvard, Vancouver, ISO, and other styles

50

Bartholmai, M., M. Kammermeier, T. Wilk, and K. D. Werner. "High Dynamic Measurement of Strain and Acceleration Using a Multichannel Measuring System with Single Cable Serial Connection." Materials Today: Proceedings 3, no. 4 (2016): 931–35. http://dx.doi.org/10.1016/j.matpr.2016.03.023.

Full text

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!