Relevant bibliographies by topics / Shaft lifting machine

Contents

  1. Journal articles
  2. Book chapters
  3. Conference papers

Academic literature on the topic 'Shaft lifting machine'

Author: Grafiati
Published: 4 June 2025
Last updated: 1 August 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Shaft lifting machine.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Shaft lifting machine"

1

Zhao, G., Zsolt Tiba, and József Menyhárt. "Optimization and Analysis of Structure about Lifting Device of Logistics Sorting." International Journal of Engineering and Management Sciences 4, no. 4 (2019): 425–31. http://dx.doi.org/10.21791/ijems.2019.4.49.

Full text
Abstract:
The lifting device of a logistics sorting machine needs high frequency upward and downward reciprocating motion therefore the cutting fork arms and matching parts of the shaft are often worn out. In this paper the problem of the shear fork types applied for the lifting mechanism is studied at first. Then the advanced numerical simulation software ANSYS adopted for the lifting mechanism of the shear fork type, and the means of virtual simulation is introduced. Hence the possible location of faults and fault modes are analysed. Then improving measures about the lifting mechanism of the logistics
APA, Harvard, Vancouver, ISO, and other styles
2

Amol, Patil*1 Prof. Vikram Avhad2 &. Prof. Anantharma3. "DESIGN AND STRUCTURAL BEHAVIOR ANALYSIS OF DEDICATED HOOK FOR CRANK SHAFT HANDLING MACHINE." INTERNATIONAL JOURNAL OF ENGINEERING SCIENCES & RESEARCH TECHNOLOGY 6, no. 6 (2017): 257–68. https://doi.org/10.5281/zenodo.809157.

Full text
Abstract:
Crank shaft machining on two end faces by dedicated tooling solution is designed with conceptual model and full proof assembly structure. Work gives conceptual model and mechanical design of special application fixture hook made for crane which is to be used overhead material handling application in component machining automation. Crank shaft is to be machined for drilling operation executes in line on end faces of the component so this hook gives perfect fixturing with full proof poka yoke to move on overhead sliding panel provided in shop floor. design and product development considered with
APA, Harvard, Vancouver, ISO, and other styles
3

Dovbysh, A.S., V.I. Zimovets, Y.A. Zuban, and A.S. Prikhodchenko. "Machine Training of the System of Functional Diagnostics of the Shaft Lifting Machine." Problemele Energeticii Regionale 2(43) (August 13, 2019): 88–102. https://doi.org/10.5281/zenodo.3367060.

Full text
Abstract:
The aim of the work is to increase the accuracy of functional diagnostics of a mine hoist by using the method of information-extreme machine teaching with a hierarchical data structure. The tasks set forth in the work were to develop a categorical model; to carry out synthesis based on its hierarchical machine teaching algorithm for a functional diagnosis system; and to optimize the system of acceptance tolerance. Functional diagnostics necessitates the analysis of a large number of diagnostic features and recognition classes that characterize not only possible malfunctions, but also intermedi
APA, Harvard, Vancouver, ISO, and other styles
4

Lipschitz, A. "A Zero-Leakage Film Riding Face Seal." Journal of Tribology 107, no. 3 (1985): 326–30. http://dx.doi.org/10.1115/1.3261063.

Full text
Abstract:
A new [1] zero-leakage film riding mechanical face seal is presented. The seal serves as a static-contacting seal while the machine shaft is in stand-still and turns into a film riding dynamic seal by lifting off the rotor surface to a few micro-meters gap once motion has begun. The dynamic sealing as well as lifting capabilities stem from inter-connected hydro-dynamic bearings which are circumferentially distributed around the annular stator face. Approximate calculations together with preliminary experimental results are shown and analyzed.
APA, Harvard, Vancouver, ISO, and other styles
5

Yang, Xu, Yingsi Wu, Lihe Wang, et al. "Design and Performance Test of 4UJ-180A Potato Picking and Bagging Machine." Agriculture 14, no. 3 (2024): 454. http://dx.doi.org/10.3390/agriculture14030454.

Full text
Abstract:
To address problems encountered in current potato harvesting machines, such as potato damage, poor adaptability, and low operational efficiency, a new towed potato picking and bagging machine (4UJ-180A) equipped with a soil-digging axis, flexible conveying device, and hydraulic control system was developed. The digging mechanism of the harvester can reduce soil blockage and minimize damage to potato skins. The rubber biomimetic finger can maintain stable transportation of potatoes and minimize collisions. The hydraulic control system, the buffering components, and the bagging device work toget
APA, Harvard, Vancouver, ISO, and other styles
6

G.O., Osueke, Obot O.W., Emeka Opara F.O., and Oguh E. N. "Design and Fabrication of Motorized Screw Jack Using Local Content for Higher Workshop Productivity." Journal of Advance Research in Mechanical & Civil Engineering (ISSN: 2208-2379) 3, no. 4 (2016): 10–17. http://dx.doi.org/10.53555/nnmce.v3i4.317.

Full text
Abstract:
The design and fabrication of this motorized screw jack was carried out using locally available materials. The machine comprises of a jack, Electric motor, gear, shaft, 12V battery that drives the electric motor. The fabrication was carried out, sing electric arc welding machine for major joinery while other fastening devices such as bolts and nuts were applied in the finishing stages. During the test runs, the jack performed very satisfactorily for loads varying from 2 tonnes to 5 tonnes. It will therefore serve effectively for lifting of workshop equipment and cars within its range of capaci
APA, Harvard, Vancouver, ISO, and other styles
7

Cao, Ling Zhi, and Miao Zheng. "Lifting Capacity Detection System of Tower Crane Based on LabVIEW." Applied Mechanics and Materials 380-384 (August 2013): 860–65. http://dx.doi.org/10.4028/www.scientific.net/amm.380-384.860.

Full text
Abstract:
The real-time acquisition of lifting capacity is a common problem in the course of tower crane work. Its an accurate and reliable method to use shaft pin type load cell to convert weight to electrical signal which is detected and processed in practical. Using STC89C52 as the core processor, the hardware consists of signal section modulating circuit, acquisition circuit and communication circuit; C language and LabVIEW graphical language are used to develop the system, including A/D conversion, data transmission, reduction and linear compensation, section control and data storage. As shown in t
APA, Harvard, Vancouver, ISO, and other styles
8

Mokin, Borys, Oleksandr Mokin, and Oleksandr Kryvonis. "ADEQUACY EVALUATION OF THE SYNTHESIS OF MATHEMATICAL MODELS FOR ONE CLASS OF LINEAR DYNAMIC SYSTEMS WITH PARAMETERS, VARIABLE IN TIME AND IN SPACE." ScienceRise, no. 5 (November 11, 2020): 35–43. http://dx.doi.org/10.21303/2313-8416.2020.001486.

Full text
Abstract:
The object of research: the authors of this work have synthesized in previous publications a mathematical model of one class of linear dynamic systems with variable parameters in time and space, which includes the system for lifting and lowering a load with a crane in the case of taking into account the influence of longitudinal vibrations that arise in the cable of the lifting mechanism, and shift in time of the moment of inertia of the rotating masses reduced to the motor shaft.
 Investigated problem: simulation models are synthesized in the Simulink graphical software environment of th
APA, Harvard, Vancouver, ISO, and other styles
9

Borys, Mokin, Mokin Oleksandr, and Kryvonis Oleksandr. "ADEQUACY EVALUATION OF THE SYNTHESIS OF MATHEMATICAL MODELS FOR ONE CLASS OF LINEAR DYNAMIC SYSTEMS WITH PARAMETERS, VARIABLE IN TIME AND IN SPACE." ScienceRise, no. 5 (Special Issue) (October 30, 2020): 35–43. https://doi.org/10.21303/2313-8416.2020.001486.

Full text
Abstract:
<strong>The object of research:</strong>&nbsp;the authors of this work have synthesized in previous publications a mathematical model of one class of linear dynamic systems with variable parameters in time and space, which includes the system for lifting and lowering a load with a crane in the case of taking into account the influence of longitudinal vibrations that arise in the cable of the lifting mechanism, and shift in time of the moment of inertia of the rotating masses reduced to the motor shaft. <strong>Investigated problem:</strong>&nbsp;simulation models are synthesized in the Simulin
APA, Harvard, Vancouver, ISO, and other styles
10

Toirov, Olimjon, and Salikhdjan Khalikov. "Diagnostics of pumping units of pumping station of machine water lifting." E3S Web of Conferences 365 (2023): 04013. http://dx.doi.org/10.1051/e3sconf/202336504013.

Full text
Abstract:
The purpose of diagnostics is to determine the operability of the pumping units of the pumping station of the machine water lifting at a given time and to identify defects in their components. For this reason, the article presents diagnostic issues for pumping stations No. 1 - No. 6 of the Karshi main canal, designed and commissioned in 1965-1976, where 6 pumping units of the OPV11-260EG type with electric motors of the VDS-375/130-24 type are installed, vertical pumping units, shaft power – 8010 kW, rated power electric motor – 12500 kW, voltage – 10.0 kV, stator current – 825.0 A, maximum pe
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Shaft lifting machine"

1

"Mechanical and ergonomics hazards." In Oxford Handbook of Occupational Health 3e, edited by Steven S. Sadhra, Alan J. Bray, Steve Boorman, Steven S. Sadhra, Alan J. Bray, and Steve Boorman. Oxford University Press, 2022. http://dx.doi.org/10.1093/med/9780198849803.003.0004.

Full text
Abstract:
This chapter outlines specific ergonomic hazards found in the workplace, tools and methods to assess the level of risk of these hazards and examples of control measures commonly used to reduce risks. Specific factors that should be considered in the design of jobs to reduce physical and mental hazards are discussed as part of the Ergonomics Onion model. These include person / employee characteristics, the tasks that are performed in the workplace (physical and cognitive), equipment and machines used, workspace in which the tasks are carried out, physical environment such as temperature and lig
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Shaft lifting machine"

1

Qing-Ming Yiu and Sheng-Li Xie. "Arithmetic shift method suitable for VLSI implementation to CDF 9/7 discrete wavelet transform based on lifting scheme." In Proceedings of 2005 International Conference on Machine Learning and Cybernetics. IEEE, 2005. http://dx.doi.org/10.1109/icmlc.2005.1527869.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Heggum, Geir, Cyril Girard, William Harden, Steven McNair, and Scott McAllister. "Development of Advanced Electric Submersible Pumps to Meet Today’s Challenges." In SPE Gulf Coast Section Electrical Submersible Pump Workshop. SPE, 2013. http://dx.doi.org/10.2118/217395-ms.

Full text
Abstract:
Abstract ESP technology has been incrementally evolving for many years now and can be considered a mature technology for well lifting applications. However, despite improvements, longevity of ESP equipment is still relatively poor, many of the reasons for which are rooted in the basic arrangement of the ESP motor – seal – pump – cable architecture that was developed over 80 years ago for land based well applications and using a historical business model based on commodity volumes. With the increasing shift towards high CAPEX and OPEX offshore wells, often involving deep waters, large setting d
APA, Harvard, Vancouver, ISO, and other styles
3

Mahatvaraj, Alpha, Nirav D. Vora, Jimmy Bush, Glenn Cunningham, Joseph J. Biernacki, and Jeffrey Frolik. "Surface Micro-Machined Mirrors Using Simple Floating and Fixed Hinge Designs for Three-Layer Process." In ASME 2001 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2001. http://dx.doi.org/10.1115/imece2001/mems-23862.

Full text
Abstract:
Abstract Micro-mirrors and other hinged microstructures have numerous MEMS applications. Such micro-mirrors can be used in laser-interferometry, laser beam modulation, fiber-optical switching, laser scanners and printers and a variety of other optical applications. A pop-up mirror device is proposed which consist of a hinged polysilicon mirror mounted on a silicon substrate. The folding mirror, with one fixed hinge and two floating hinges, is designed such that the mirror is lifted off the substrate by the linear movement of a shaft from an actuating system. The assembly uses a simple three-la
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Shaft lifting machine' for particular source types:
Journal articles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography