Log in

Relevant bibliographies by topics / Shape Memory Alloy

Contents

Journal articles
Dissertations / Theses
Books
Book chapters
Conference papers
Reports

Academic literature on the topic 'Shape Memory Alloy'

Author: Grafiati

Published: 4 June 2021

Last updated: 8 March 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Shape Memory Alloy.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Shape Memory Alloy"

1

Paton, B. E., D. M. Kaleko, S. N. Kedrovsky, Yu N. Koval, I. V. Krivtsun, and V. N. Slepchenko. "Resistance welding of shape-memory copper-aluminium alloy." Paton Welding Journal 2015, no. 12 (December 28, 2015): 2–7. http://dx.doi.org/10.15407/tpwj2015.12.01.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

FUKUYO, HIROO. "Shape memory alloy implant." Nihon Hotetsu Shika Gakkai Zasshi 31, no. 6 (1987): 1354–63. http://dx.doi.org/10.2186/jjps.31.1354.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Bellouard, Yves, and Reymond Clavel. "Shape memory alloy flexures." Materials Science and Engineering: A 378, no. 1-2 (July 2004): 210–15. http://dx.doi.org/10.1016/j.msea.2003.12.062.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Pruski, A., and H. Kihl. "Shape memory alloy hysteresis." Sensors and Actuators A: Physical 36, no. 1 (March 1993): 29–35. http://dx.doi.org/10.1016/0924-4247(93)80137-6.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Bergamasco, M., P. Dario, and F. Salsedo. "Shape memory alloy microactuators." Sensors and Actuators A: Physical 21, no. 1-3 (February 1990): 253–57. http://dx.doi.org/10.1016/0924-4247(90)85049-a.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Planes, Antoni, and Lluís Mañosa. "Ferromagnetic Shape-Memory Alloys." Materials Science Forum 512 (April 2006): 145–52. http://dx.doi.org/10.4028/www.scientific.net/msf.512.145.

Full text

Abstract:

The magnetic shape-memory effect is a consequence of the coupling between magnetism and structure in ferromagnetic alloys undergoing a martensitic transformation. In these materials large reversible strains can be magnetically induced by the rearrangement of the martensitic twin-variant structure. Several Heusler and intermetallic alloys have been studied in connec- tion with this property. In this paper we will focus on the Ni-Mn-Ga Heusler alloy which is considered to be the prototypical magnetic shape-memory alloy. After a brief summary of the general properties of this class of materials, we will present recent results of relevance for the understanding of the effect of magnetism on the martensitic transformation. Finally, we will discuss the requirements for the occurrence of the magnetic shape-memory effect.

APA, Harvard, Vancouver, ISO, and other styles

7

MORALES S., Marcia, Hisaaki TOBUSHI, Kousuke DATE, and Kouji MIYAMOTO. "654 Bending Fatigue Properties of TiNi Shape Memory Alloy." Proceedings of Conference of Tokai Branch 2010.59 (2010): 373–74. http://dx.doi.org/10.1299/jsmetokai.2010.59.373.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Liu, Bingfei, Qingfei Wang, Kai Yin, and Liwen Wang. "An analytical model for crack monitoring of the shape memory alloy intelligent concrete." Journal of Intelligent Material Systems and Structures 31, no. 1 (October 16, 2019): 100–116. http://dx.doi.org/10.1177/1045389x19880010.

Full text

Abstract:

A theoretical model for the crack monitoring of the shape memory alloy intelligent concrete is presented in this work. The mechanical properties of shape memory alloy materials are first given by the experimental test. The one-dimensional constitutive model of the shape memory alloys is reviewed by degenerating from a three-dimensional model, and the behaviors of the shape memory alloys under different working conditions are then discussed. By combining the electrical resistivity model and the one-dimensional shape memory alloy constitutive model, the crack monitoring model of the shape memory alloy intelligent concrete is given, and the relationships between the crack width of the concrete and the electrical resistance variation of the shape memory alloy materials for different crack monitoring processes of shape memory alloy intelligent concrete are finally presented. The numerical results of the present model are compared with the published experimental data to verify the correctness of the model.

APA, Harvard, Vancouver, ISO, and other styles

9

Chan, Kuen Cheong, and Li Min Zhou. "Static Behaviours of Carbon Fibre Composite Strip with Bifurcated Type Shape Memory Alloy Pins." Key Engineering Materials 334-335 (March 2007): 1153–56. http://dx.doi.org/10.4028/www.scientific.net/kem.334-335.1153.

Full text

Abstract:

A numerical study of the static behaviours of composite strip with bifurcated type shape memory alloy pins has been conducted. The case of bifurcated type shape memory alloy pins inserted inside the composite strip around the hole to reinforce the laminate, which was subjected to the axial stress was simulated. The models for stress analysis were established by using ANSYS finite element programme. Two types of shape memory alloy pins were proposed to insert along the through thickness direction of the carbon fibre woven fabric composite strip to induce the clamping force. The pre-tensioned load was applied to the shape memory alloy pins in order to reduce occurrence of delamination in the laminate. Three-dimensional elements and contact elements were used to simulate the contact between the composite laminate and shape memory alloy pin to investigate the stress distribution around the hole in the composite strip. The effect of pre-strain of shape memory alloy on the stresses inside composite was studied. The results show that the stress characteristics of the button-shaped and bifurcated shape memory alloy pin models are similar; however, the stresses for the button-shaped pin model are lower. The tensile and compressive stresses, both in button-shaped and bifurcated pin models, are strongly dependent on the percentage of pre-strain of the shape memory alloy. It is therefore concluded that the shape memory alloy pin method was significantly reduced the stress concentration of the composite strip laminate.

APA, Harvard, Vancouver, ISO, and other styles

10

Xu, Hua Ping, Gao Feng Song, and Xie Min Mao. "Influence of Be and Ni to Cu-Al Alloy Shape Memory Performance." Advanced Materials Research 197-198 (February 2011): 1258–62. http://dx.doi.org/10.4028/www.scientific.net/amr.197-198.1258.

Full text

Abstract:

With Bridgeman directional solidification method the single crystal alloys of CuAl base shape memory alloy (SMA) with different components were prepared. And their shape memory performance characters were systematically investigated. The results show that the single crystal of CuAlNiBe quaternary shape memory alloy has much better shape memory properties than that of the CuAlBe and CuAlNi ternary alloy. That meant that in the CuAl base SMA alloy the mixed addition of Be and Ni changed the quenching microstructure has a strengthening effect to improve the shape memory performance of the SMA alloy.

APA, Harvard, Vancouver, ISO, and other styles

More sources

Dissertations / Theses on the topic "Shape Memory Alloy"

1

Prothero, Lori Michelle Gross Robert Steven. "Shape memory alloy robotic truss." Auburn, Ala, 2008. http://repo.lib.auburn.edu/EtdRoot/2008/SUMMER/Aerospace_Engineering/Thesis/Prothero_Lori_16.pdf.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Lafontaine, Serge R. "Fast shape memory alloy actuators." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 1998. http://www.collectionscanada.ca/obj/s4/f2/dsk1/tape11/PQDD_0004/NQ44482.pdf.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Lafontaine, Serge R. "Fast shape memory alloy actuators." Thesis, McGill University, 1997. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=34990.

Full text

Abstract:

In this thesis techniques for fabricating fast contracting and relaxing shape memory alloy (SMA) fibers are presented. Shape memory alloy fibers have demonstrated the largest stress and highest power to mass ratio of any known actuator technology. However their practical application has been plagued by three major drawbacks, namely: (1) relatively slow expansion of the material despite rapid contraction; (2) problems of mechanically and electrically connecting to the material due to the violent nature of their contractions; and (3) low efficiency in the conversion of electrical energy or heat into mechanical energy. The work associated with this thesis has led to solutions to the first two problems allowing even sub-millisecond contraction-expansion cycle times, and fibers to be attached via light weight but high strength and high conductivity joints. The properties of these fibers are extensively studied. Both linear and rotary actuators are built using these fibers.
A new technique is presented to mount nickel-titanium (NiTi) SMA fibers. NiTi alloys are not readily bonded, soldered, brazed or welded to other materials. The new method employs metal deposited on the fiber or between two fibers or between fibers and other parts, creating metallic attachments that are mechanically sound and electrically conductive. Furthermore a new process for the three-dimensional microfabrication by localized electrodeposition and etching has also been developed. This latter process, combined with the first process, can be used to integrate NiTi alloys in micro-mechanisms. The good electrical contacts as well as mechanical contact provided by the new attachment mechanisms are important, since they allow the rapid methods to be employed.
Several apparatus were built to study the response of NiTi fibers, in particular to very fast current pulses. Experimental results were obtained to describe the response of the fibers, such as their speed, hysteresis, stiffness and resistivity, and show how these variables change dynamically as a function of time, temperature and stress. Other measurements important for the design of new actuators were done, such as those of efficiency when fast actuation with large current pulses is used.
In the third part of the thesis a novel application for fast fiber actuators is presented in the form of a fast rotary motor for in-the-wheel car rotary motors.

APA, Harvard, Vancouver, ISO, and other styles

4

Santiago, Anadón José R. "Large force shape memory alloy linear actuator." [Gainesville, Fla.] : University of Florida, 2002. http://purl.fcla.edu/fcla/etd/UFE1001179.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Yoshikawa, Shuji. "Global solutions for shape memory alloy systems /." Sendai : Tohoku Univ, 2007. http://www.gbv.de/dms/goettingen/538059052.pdf.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Prince, A. G. "Refrigeration effects in shape memory alloy systems." Thesis, University of Bristol, 2005. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.425093.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Orvis, Skye M. "Prestressing Concrete with Shape Memory Alloy Fibers." DigitalCommons@CalPoly, 2009. https://digitalcommons.calpoly.edu/theses/120.

Full text

Abstract:

Concrete is considerably stronger in compression than it is in tension. When cracks form in concrete members, the flexural stiffness of the member decreases and the deflection increases which increases the overall size of the member. Prestressing concrete remedies this problem by inducing a compressive stress in the concrete thereby reducing the net tension in the member and increasing the load required to crack the member. Traditional prestressing is generally limited to large, straight members. During the last decade, shape memory alloys (SMA) have become more prevalent in engineering and civil engineering applications. The shape memory effect refers to the contraction of the SMA when it is heated to its austenite phase. When a prestrain is induced in the SMA, it can be recovered when it goes through the phase change. Nitinol, a NiTi shape memory alloy was used in this research. Thin, steel cables were also tested to provide a comparison. Two different Nitinol alloys were studied in this research. The alloy M wires were elongated to 8% stain while the alloy X wires were prestrained by the manufacturer. The wires were cast into thin concrete beams and once cured, the beams were heated and a phase change from martensite to austenite occurred in the Nitinol. As a result, the Nitinol contracted and compressed the concrete. The SMA fibers are randomly oriented and allow prestressing to occur along all three axis. This is ideal for thin, curved specimens. Third-point bending tests showed that the SMA fibers prestressed the concrete and upon reheating the cracked specimens, the shape memory effect provides partial crack closure.

APA, Harvard, Vancouver, ISO, and other styles

8

Walls-Bruck, Marcus. "Shape adaptive self-fixing structures using shape memory alloy actuation." Thesis, University of Bristol, 2011. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.556738.

Full text

Abstract:

Shape changing or morphing structures enable optimisation of structural configuration to suit current operating conditions. Conventional techniques for achieving shape change often result in weight and complexity penalties, which may outweigh the potential benefits of greater shape changing ability. The research presented in this thesis focuses on the use of shape memory materials to achieve a reversible change in shape of an innovative compliant composite structure, which may enable shape change without the drawbacks of conventional shape changing techniques. An initial concept was evaluated using a glass fibre reinforced shape memory polymer which was heated and deformed locally to fix the actuated shape. It was found that a large change in shape can be achieved. However, due to the high shear strain between the fibres during large deformations, fibre/matrix debonding occurred and propagated with repeated cycling. An alternative topology, consisting of a shape memory polymer reinforced with comparatively large diameter precured CFRP composite rods, was proposed and successfully demonstrated to reduce matrix shear strains, thereby reducing damage during deformation. The increased reinforcement size also improved load carrying ability when the shape memory polymer was in its low stiffness state. Initial testing of a rod reinforced composite beam with a low stiffness elastomer matrix indicated that shape memory alloy actuators wound helically around the composite beam could be effectively used to provide Significant rotational actuation. A constitutive model of the shape memory alloy thermo-mechanical behaviour was compared to the experimental findings for different configurations of shape memory alloy winding around the composite beam. A composite beam with a shape memory polymer matrix was found capable of 'locking' and 'releasing' mechanically introduced rotational shape change. The composite beam topology used initially consisted of circular rods and relied upon an adhesive for torsional rod restraint within the end alignment fittings, often resulting in failure of the adhesive and large non- returnable rotations at the temperatures required for softening of the shape memory polymer matrix. Rectangular cross section rods were used to enable the end fittings to mechanically restrain the rods in torsion. The rectangular rod topology also gave a large increase in bending stiffness compared to circular rods, with both topologies having similar torsional rigidities. A key aspect of the actuator performance was found to be the rate at which the shape memory materials could be activated by heating or cooling. This was found to be a particular problem for the shape memory polymer. To increase the rate of heating for the composite beam with a shape memory polymer matrix, efforts were made to incorporate carbon nanotubes to improve the thermal response of the material. However, only a modest change in thermal properties was achieved, combined with some undesirable detrimental effects on mechanical and therrno- mechanical properties. Further work is needed to optimise this combination. A final composite beam demonstrator combining both helically wound shape memory alloy wires for actuation and a shape memory polymer matrix for shape fixing was constructed. The shape memory polymer matrix was heated using an embedded heating element. By activating the shape memory alloy actuators when the shape memory polymer matrix was in its soft state, a rotation was achieved. Cooling the shape memory polymer matrix before the shape memory alloy actuators fixed the rotated, which was returned upon reheating the shape memory polymer matrix.

APA, Harvard, Vancouver, ISO, and other styles

9

Fung, Cheung Kwan. "Thermal mechanical behaviour of NiTi shape memory alloy." access abstract and table of contents access full-text, 2004. http://libweb.cityu.edu.hk/cgi-bin/ezdb/dissert.pl?msc-ap-b21174076a.pdf.

Full text

Abstract:

Thesis (M.Sc.)--City University of Hong Kong, 2004.
At head of title: City University of Hong Kong, Department of Physics and Materials Science, Master of Science in materials engineering & nanotechnology dissertation. Title from title screen (viewed on Aug. 31, 2006) Includes bibliographical references.

APA, Harvard, Vancouver, ISO, and other styles

10

Machado, Luciano G. "Shape memory alloy for vibration isolation and damping." Texas A&M University, 2007. http://hdl.handle.net/1969.1/85772.

Full text

Abstract:

This work investigates the use of shape memory alloys (SMAs) for vibration isolation and damping of mechanical systems. The first part of this work evaluates the nonlinear dynamics of a passive vibration isolation and damping (PVID) device through numerical simulations and experimental correlations. The device, a mass connected to a frame through two SMA wires, is subjected to a series of continuous acceleration functions in the form of a sine sweep. Frequency responses and transmissibility of the device as well as temperature variations of the SMA wires are analyzed for the case where the SMA wires are pre-strained at 4.0% of their original length. Numerical simulations of a one-degree of freedom (1-DOF) SMA oscillator are also conducted to corroborate the experimental results. The configuration of the SMA oscillator is based on the PVID device. A modified version of the constitutive model proposed by Boyd and Lagoudas, which considers the thermomechanical coupling, is used to predict the behavior of the SMA elements of the oscillator. The second part of this work numerically investigates chaotic responses of a 1- DOF SMA oscillator composed of a mass and a SMA element. The restitution force of the oscillator is provided by an SMA element described by a rate-independent, hysteretic, thermomechanical constitutive model. This model, which is a new version of the model presented in the first part of this work, allows smooth transitions between the austenitic and the martensitic phases. Chaotic responses of the SMA oscillator are evaluated through the estimation of the Lyapunov exponents. The Lyapunov exponent estimation of the SMA system is done by adapting the algorithm by Wolf and co-workers. The main issue of using this algorithm for nonlinear, rateindependent, hysteretic systems is related to the procedure of linearization of the equations of motion. The present work establishes a procedure of linearization that allows the use of the classical algorithm. Two different modeling cases are considered for isothermal and non-isothermal heat transfer conditions. The evaluation of the Lyapunov exponents shows that the proposed procedure is capable of quantifying chaos in rate-independent, hysteretic dynamical systems.

APA, Harvard, Vancouver, ISO, and other styles

More sources

Books on the topic "Shape Memory Alloy"

1

Czechowicz, Alexander, and Sven Langbein, eds. Shape Memory Alloy Valves. Cham: Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-19081-5.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Elahinia, Mohammad H. Shape Memory Alloy Actuators. Chichester, UK: John Wiley & Sons, Ltd, 2015. http://dx.doi.org/10.1002/9781118426913.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Rao, Ashwin, A. R. Srinivasa, and J. N. Reddy. Design of Shape Memory Alloy (SMA) Actuators. Cham: Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-03188-0.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Yoshikawa, Shuji. Global solutions for shape memory alloy systems. Sendai, Japan: Tohoku University, 2007.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

5

Center, Langley Research, ed. Thermomechanical response of shape memory alloy hybrid composites. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 2001.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

6

International, Symposium on Shape Memory Alloys (1986 Guilin China). Shape memory alloy' 86': Proceedings of the International Symposium on Shape Memory Alloys, September 6-9, 1986, Guilin, China. Beijing: China Academic Publishers, 1986.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

7

Birman, V. Micromechanics of composites with shape memory alloy fibers in uniform thermal fields. [Washington, D.C.]: National Aeronautics and Space Administration, 1995.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

8

Tsuchiya, Kazuyoshi. Fabrication of TiNi shape memory alloy microactuators by ion beam sputter deposition. [s.l.]: typescript, 1999.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

9

Fremond, M., and S. Miyazaki. Shape Memory Alloys. Vienna: Springer Vienna, 1996. http://dx.doi.org/10.1007/978-3-7091-4348-3.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

1927-, Funakubo Hiroyasu, ed. Shape memory alloys. New York: Gordon and Breach Science Publishers, 1987.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

More sources

Book chapters on the topic "Shape Memory Alloy"

1

Frémond, M. "Shape Memory Alloy." In Shape Memory Alloys, 1–68. Vienna: Springer Vienna, 1996. http://dx.doi.org/10.1007/978-3-7091-4348-3_1.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Fang, Cheng, and Wei Wang. "Shape-Memory Alloy Elements." In Shape Memory Alloys for Seismic Resilience, 43–96. Singapore: Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-13-7040-3_2.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Czechowicz, Alexander, and Sven Langbein. "Introduction." In Shape Memory Alloy Valves, 1–2. Cham: Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-19081-5_1.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Langbein, Sven, and Alexander Czechowicz. "Methodology for SMA Valve Development Illustrated by the Development of a SMA Pinch Valve." In Shape Memory Alloy Valves, 151–78. Cham: Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-19081-5_10.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Czechowicz, Alexander, and Sven Langbein. "Examples of Shape Memory Alloy Valves on Market." In Shape Memory Alloy Valves, 179–89. Cham: Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-19081-5_11.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Langbein, Sven, and Alexander Czechowicz. "Future Perspectives of SMA and SMA Valves." In Shape Memory Alloy Valves, 191–207. Cham: Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-19081-5_12.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Hannig, Michael, Falk Höhne, and Sven Langbein. "Valve Technology: State of the Art and System Design." In Shape Memory Alloy Valves, 3–22. Cham: Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-19081-5_2.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Czechowicz, Alexander, and Sven Langbein. "Introduction to Shape Memory Alloy Technology." In Shape Memory Alloy Valves, 23–40. Cham: Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-19081-5_3.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Langbein, Sven, and Alexander Czechowicz. "Introduction to Shape Memory Alloy Actuators." In Shape Memory Alloy Valves, 41–72. Cham: Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-19081-5_4.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Seelecke, Stefan. "Sensing Properties of SMA Actuators and Sensorless Control." In Shape Memory Alloy Valves, 73–87. Cham: Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-19081-5_5.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Shape Memory Alloy"

1

"Mechanical and Functional Properties of Ti48.6Ni49.6Co1.8 Shape Memory Alloy." In Shape Memory Alloys 2018. Materials Research Forum LLC, 2018. http://dx.doi.org/10.21741/9781644900017-4.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

"Thermomechanical and Magnetic Properties of Fe-Ni-Co-Al-Ta-B Superelastic Alloy." In Shape Memory Alloys 2018. Materials Research Forum LLC, 2018. http://dx.doi.org/10.21741/9781644900017-7.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

"Production and Study of the Structure of Novel Superelastic Ti-Zr-Based Alloy." In Shape Memory Alloys 2018. Materials Research Forum LLC, 2018. http://dx.doi.org/10.21741/9781644900017-9.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

"Mechanical Properties of the TiNi and Surface Alloy Formed by Pulsed Electron Beam Treatment." In Shape Memory Alloys 2018. Materials Research Forum LLC, 2018. http://dx.doi.org/10.21741/9781644900017-12.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

"Transmission Electron Microscopy Study of the Atomic Structure of Amorphous Ti-Ta-Ni Surface Alloy." In Shape Memory Alloys 2018. Materials Research Forum LLC, 2018. http://dx.doi.org/10.21741/9781644900017-14.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

"Solid State Cooling Based on Elastocaloric Effect in Melt Spun Ribbons of the Ti2NiCu Alloy." In Shape Memory Alloys 2018. Materials Research Forum LLC, 2018. http://dx.doi.org/10.21741/9781644900017-11.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

"Influence of Cooling Rate on the Deformation Processes Associated with Direct Martensitic Transformation in TiNi Alloy." In Shape Memory Alloys 2018. Materials Research Forum LLC, 2018. http://dx.doi.org/10.21741/9781644900017-6.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

"The Effect of the Size Factor on the Functional Properties of Shape Memory Alloy Ring-Shaped Force Elements." In Shape Memory Alloys 2018. Materials Research Forum LLC, 2018. http://dx.doi.org/10.21741/9781644900017-5.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

"Influence of Stress-induced Martensite Ageing on the Shape Memory Effects in As-grown and Quenched [011]-oriented Single Crystals of Ni49Fe18Ga27Co6 Alloy." In Shape Memory Alloys 2018. Materials Research Forum LLC, 2018. http://dx.doi.org/10.21741/9781644900017-10.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Tanaka, Makoto. "Shape Memory Alloy Engine." In 27th Intersociety Energy Conversion Engineering Conference (1992). 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 1992. http://dx.doi.org/10.4271/929057.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Shape Memory Alloy"

1

Crone, Wendy C., Arhur B. Ellis, and John H. Perepezko. Nanostructured Shape Memory Alloys: Composite Materials with Shape Memory Alloy Constituents. Fort Belvoir, VA: Defense Technical Information Center, March 2004. http://dx.doi.org/10.21236/ada423479.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Johnson, A. D. Shape-Memory Alloy Tactical Feedback Actuator. Phase 1. Fort Belvoir, VA: Defense Technical Information Center, August 1990. http://dx.doi.org/10.21236/ada231389.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Pollard, Eric L., and Christopher H. Jenkins. Shape Memory Alloy Deployment of Membrane Mirrors for Spaceborne Telescopes. Fort Belvoir, VA: Defense Technical Information Center, January 2005. http://dx.doi.org/10.21236/ada443511.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Brinson, L. C. Novel Processing for Creating 3D Architectured Porous Shape Memory Alloy. Fort Belvoir, VA: Defense Technical Information Center, March 2013. http://dx.doi.org/10.21236/ada586593.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Birman, Victor. Functionally Graded Shape Memory Alloy Composites Optimized for Passive Vibration Control. Fort Belvoir, VA: Defense Technical Information Center, November 2006. http://dx.doi.org/10.21236/ada459593.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Crews, John H., and Ralph C. Smith. Modeling and Bayesian Parameter Estimation for Shape Memory Alloy Bending Actuators. Fort Belvoir, VA: Defense Technical Information Center, February 2012. http://dx.doi.org/10.21236/ada556967.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Brinson, L. Catherine Catherine, and Aaron Stebner. MICROSTRUCTURE ANISOTROPY EFFECTS ON FRACTURE AND FATIGUE MECHANISMS IN SHAPE MEMORY ALLOY MARTENSITES. Office of Scientific and Technical Information (OSTI), December 2019. http://dx.doi.org/10.2172/1579299.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Seward, Kirk P. A new mechanical characterization method for thin film microactuators and its application to NiTiCi shape memory alloy. Office of Scientific and Technical Information (OSTI), June 1999. http://dx.doi.org/10.2172/13579.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Srour, Merric D., Cory R. Knick, and Christopher J. Morris. Characterization of Sputtered Nickel-Titanium (NiTi) Stress and Thermally Actuated Cantilever Bimorphs Based on NiTi Shape Memory Alloy (SMA). Fort Belvoir, VA: Defense Technical Information Center, November 2015. http://dx.doi.org/10.21236/ada623954.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Wendy Crone, Walter Drugan, Arthur Ellis, and John Perepezko. Final Technical Report: Nanostructured Shape Memory ALloys. Office of Scientific and Technical Information (OSTI), July 2005. http://dx.doi.org/10.2172/841686.

Full text

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!