Log in

Relevant bibliographies by topics / Silicon Mould

Contents

Journal articles

Academic literature on the topic 'Silicon Mould'

Author: Grafiati

Published: 4 June 2021

Last updated: 1 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Silicon Mould.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Silicon Mould"

1

Nadolski, M., Z. Konopka, M. Łągiewka, and A. Zyska. "The Influence of the Method of Mould Filling on the Quality of Castings Made of EN AC-44000 or EN AC-46200 Alloy." Archives of Foundry Engineering 14, no. 4 (2014): 73–76. http://dx.doi.org/10.2478/afe-2014-0089.

Full text

Abstract:

Abstract The performed examinations concerning the process of filling the plaster ceramic moulds with aluminium alloys allowed to assess the influence of various methods of introducing the metal into the mould cavity on the macro- and microstructure of the obtained experimental castings. The comparison was performed for castings with graded wall thickness made either of EN AC-44000 alloy or of EN AC-46000 alloy, produced either by gravity casting, or by gravity casting with negative pressure generated around the mould (according to the Vacumetal technology), or by counter-gravity casting. It w

APA, Harvard, Vancouver, ISO, and other styles

2

Kumar, P., H. Lakshmi, and P. Dutta. "Solidification of A356 Alloy in a Linear Electromagnetic Stirrer." Solid State Phenomena 141-143 (July 2008): 563–68. http://dx.doi.org/10.4028/www.scientific.net/ssp.141-143.563.

Full text

Abstract:

In the present work, a 2-pole linear electromagnetic stirrer (LEMS) is developed to study the effect of stirring during solidification of aluminium alloys. The stirrer design entails the placement of a stack of coils around the mold to generate a primary motion that recirculates along the longitudinal direction. The stirrer is first tested and validated by measuring the electromagnetic forces on solid aluminum cylinders of different diameters as a function of excitation current. The alloy to be stirred and solidified is placed in a cylindrical graphite mould located in the annulus of the LEMS.

APA, Harvard, Vancouver, ISO, and other styles

3

Hide, I., T. Yokoyama, T. Matsuyama, et al. "Mould shaping silicon crystal growth with a mould coating material by the spinning method." Journal of Crystal Growth 79, no. 1-3 (1986): 583–89. http://dx.doi.org/10.1016/0022-0248(86)90524-5.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Zhang, Zhuang Ya, Hai Guang Zhang, Fu Ping Wan, Yuan Yuan Liu, and Qing Xi Hu. "ABAQUS-Based Numerical Computation and Experiment Research on Silicon Rubber Mould’s Deformation during DPVC Process." Key Engineering Materials 579-580 (September 2013): 584–89. http://dx.doi.org/10.4028/www.scientific.net/kem.579-580.584.

Full text

Abstract:

Aiming at exploiting the impact of filling rate and pressure difference on thin-wall product during filling stage of differential pressure vacuum casting (DPVC) process and based on Yeoh model, a finite element mathematical structure model of silicon rubber is proposed. Employing nonlinear Finite Element Method (FEM), the impact of soft moulds deformation on products dimensional precision during different pressure difference is studied. Finally, the experiment carried out on a sample machine verifies that the solution of established finite element mathematical structure model of silicon rubber

APA, Harvard, Vancouver, ISO, and other styles

5

Yang, J., L. Xiao, Jian Zhong Zhou, Shu Huang, J. R. Fan, and Y. C. Dai. "Numerical Study of Vacuum Casting DVD Panel Based on Silicon Mould." Applied Mechanics and Materials 43 (December 2010): 707–11. http://dx.doi.org/10.4028/www.scientific.net/amm.43.707.

Full text

Abstract:

As a new fabrication technique based on rapid prototyping, vacuum casting process can be especially used in the stage of products development. In this paper, a self-designed and made silicone mould was used to study process of vacuum casting panel part. ProCAST software was adopted to analyze the melt flowing behavior and effects of processing parameters. The key vacuum casting parameters, such as mould temperature, melt temperature, degree of vacuum and coefficient of heat transfer, on the effects of the filling rate of polymer melt were emphasized to be numerical studied. The results indicat

APA, Harvard, Vancouver, ISO, and other styles

6

Varga, Béla, Eva Fazakas, and L. K. Varga. "Dilatometer Study of Aluminium-Silicon Based Alloys with Metastabile Structures." Materials Science Forum 649 (May 2010): 529–32. http://dx.doi.org/10.4028/www.scientific.net/msf.649.529.

Full text

Abstract:

Aluminum-Silicon alloys are sought in a large number of automotive and aerospace applications due to their low coefficient of thermal expansion and high wear resistance. The fine structure of Si precipitates is controlled by forced solid solution structure obtainable by rapidly solidification techniques [1, 2, 3]. Present study focuses on precipitation of silicon in Al88Si12 as a function of temperature by dilatometer analysis. Different structures out of equilibrium have been obtained after casting in sand, black-lead and steel mould and by melt spinning. The average value of the activation e

APA, Harvard, Vancouver, ISO, and other styles

7

PROKKOLA, S., and P. KIVIJÄRVI. "Effect of biological sprays on the incidence of grey mould, fruit yield and fruit quality in organic strawberry production." Agricultural and Food Science 16, no. 1 (2008): 25. http://dx.doi.org/10.2137/145960607781635886.

Full text

Abstract:

Plant diseases, especially grey mould (Botrytis cinerea), may cause severe losses in organic strawberry production. In a two-year period, 20012002, the effects of different biological sprays on grey mould, the fruit yield and fruit quality of organically grown strawberry Jonsok were studied in field trials at MTT Agrifood Research Finland in Ruukki and Mikkeli. In Experiment 1 the biological sprays were seaweed, garlic and compost extracts, silicon and Trichoderma spp. on both trial sites. In Experiment 2, compost extract, Trichoderma spp. and Gliocladium catenulatum sprays were studied in

APA, Harvard, Vancouver, ISO, and other styles

8

Lipiński, Tomasz, and Paweł Szabracki. "Mechanical Properties of AlSi9Mg Alloy with a Sodium Modifier." Solid State Phenomena 223 (November 2014): 78–86. http://dx.doi.org/10.4028/www.scientific.net/ssp.223.78.

Full text

Abstract:

Al–Si alloys are among the most popular casting metals. Two-component aluminium alloys with silicon are not suitable for direct use after melting. Subject to their silicon content, Al Si alloys have a coarse-grained eutectic phase, and alloys with more than 13% Si content also feature large crystallites or β-phase needles. The β-phase is hard, but also fragile. Large crystallites are good planes of division, and they reduce the mechanical properties of alloys.In this study, the Al-9% Si alloy was refined with a sodium modifier. The modifier was added to the mould by the in-mould method. The mo

APA, Harvard, Vancouver, ISO, and other styles

9

Jowsa, J., M. Bielnicki, and A. Cwudziński. "Physical and Numerical Investigations of Mould Flux Entrainment into Liquid Steel." Archives of Metallurgy and Materials 61, no. 4 (2016): 2043–50. http://dx.doi.org/10.1515/amm-2016-0329.

Full text

Abstract:

Abstract This paper presents results of model tests, performed in order to analyze phenomenon of slag droplets entrainment into steel in mould, during continuous casting process. The carried out studies took the form of laboratory experiments using physical model, in which – using similarity criteria – the behaviour of interfacial boundary liquid steel-liquid slag has been simulated using water and silicon oils, differing in physicochemical properties. Additionally, based on PIV (Particle Image Velocimetry) measurements and numerical simulations, vector flow field and values of critical veloci

APA, Harvard, Vancouver, ISO, and other styles

10

Nadolski, M., Z. Konopka, M. Łągiewka, and A. Zyska. "The Influence of the Mould Filling Conditions on the Quality of Castings Made of EN AC-44000 Alloy." Archives of Foundry Engineering 14, no. 2 (2014): 19–22. http://dx.doi.org/10.2478/afe-2014-0029.

Full text

Abstract:

Abstract The work deals with the influence of change in the filling conditions of the ceramic moulds with plaster binder on the presence of gaseous porosity and the microstructure of the achieved test castings with graded wall thickness. Castings made of EN AC-44000 alloy, produced either by gravity casting, or by gravity casting with negative pressure generated around the mould (according to the Vacumetal technology), or by counter-gravity casting were compared. The results of examinations concerning the density of the produced castings indicate that no significant change in porosity was foun

APA, Harvard, Vancouver, ISO, and other styles

More sources

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!