Relevant bibliographies by topics / Silicon nitride – Synthesis

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Silicon nitride – Synthesis'

Author: Grafiati
Published: 4 June 2021
Last updated: 2 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Silicon nitride – Synthesis.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Silicon nitride – Synthesis"

1

Zhang, Ke, Qiang Zhang, Peng Fei Wang, Ling Bai, Wei Ping Shen, and Chang Chun Ge. "Silicon Nitride/Boron Nitride Composite by Combustion Synthesis." Materials Science Forum 561-565 (October 2007): 531–34. http://dx.doi.org/10.4028/www.scientific.net/msf.561-565.531.

Full text
Abstract:
Machinable silicon nitride/ hexahedral boron nitride (Si3N4/h-BN) composites were in-situ synthesized in a nitrogen (N2) atmosphere by means of combustion synthesis gas-solid reaction with silicon (Si) powder and h-BN as raw materials. The effect of the volume fraction of h-BN on the machinable properties of Si3N4/BN composite was studied. The results show that Si powder was fully nitrified and no residual Si was found. Microstructures by a scanning electron microscopy (SEM) show Columnar crystals of β-Si3N4 are the main phase and acicular crystals of h-BN disperse β-Si3N4 intergranular. With the increasing of the volume content of h-BN, the machinability of the composite increases, but the bending strength of composite decreases firstly and then increases. The lowest bending strength is 84.96MPa at 25% volume fraction of h-BN.
APA, Harvard, Vancouver, ISO, and other styles
2

Richetto, Katia C. S., and Cosme Roberto Moreira Silva. "Synthesis of Silicon Nitride Using Taguchi Planning Methodology." Materials Science Forum 591-593 (August 2008): 760–65. http://dx.doi.org/10.4028/www.scientific.net/msf.591-593.760.

Full text
Abstract:
Silicon Nitride is considered as an important material for use in structural applications. Its performance is severely influenced by modern synthesis processes. In the present work, silicon nitride powder synthesis was performed using liquid silicon tetrachloride and gaseous ammonia, at low temperature and inert atmosphere. Diimide pyrolisis was made on temperature between 1300 and 1500 0C. A Taguchi design of experiments methodology was applied, aiming to obtain powders with appropriated characteristics for structural applications. On pyrolisis, the use of alumina based substrates resulted on SIALON phase formation, probably originated from oxygen reaction, provided from alumina. Silicon carbide substrates and alumina recovered with silicon nitride enhance synthesis of pure silicon nitride powder.
APA, Harvard, Vancouver, ISO, and other styles
3

Andrievskii, Rostislav A. "Silicon nitride: synthesis and properties." Russian Chemical Reviews 64, no. 4 (April 30, 1995): 291–308. http://dx.doi.org/10.1070/rc1995v064n04abeh000151.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Zerr, Andreas, Gerhard Miehe, George Serghiou, Marcus Schwarz, Edwin Kroke, Ralf Riedel, Hartmut Fueß, Peter Kroll, and Reinhard Boehler. "Synthesis of cubic silicon nitride." Nature 400, no. 6742 (July 1999): 340–42. http://dx.doi.org/10.1038/22493.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Agrafiotis, Christos C., Jerzy Lis, Jan A. Puszynski, and Vladimir Hlavacek. "Combustion Synthesis of Silicon Nitride-Silicon Carbide Composites." Journal of the American Ceramic Society 73, no. 11 (November 1990): 3514–17. http://dx.doi.org/10.1111/j.1151-2916.1990.tb06488.x.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Marita, Yusrini, and Iskandar Idris Yaacob. "Synthesis and Characterization of Nickel-Iron-Silicon Nitride Nanocomposite." Advanced Materials Research 97-101 (March 2010): 1360–63. http://dx.doi.org/10.4028/www.scientific.net/amr.97-101.1360.

Full text
Abstract:
Nickel-iron-silicon nitride nanocomposite thin films were prepared by electrodeposition technique. The deposition was performed at current density of 11.5 A dm-2. Nano-size silicon nitride was mixed in the electrolyte bath as dispersed phase. The effects of silicon nitride nanoparticulates in the nickel-iron nanocomposite thin films were investigated in relation to the amount of silicon nitride in the plating bath. X-ray diffraction (XRD) analysis showed that the deposited nickel iron film has face-centered cubic structure (FCC). However, a mixture of body-centered cubic (BCC) and face-centered cubic (FCC) phases were observed for nickel iron-silicon nitride nanocomposite films. The crystallite size of Ni-Fe nanocomposite coating decreased with increasing amount of silicon nitride in the film. From elemental mapping procedure, Si3N4 nanopaticles were uniformly distributed in the Ni-Fe film. The presence of silicon nitride increased the hardness of the film. The microhardness of the nickel-iron nanocomposite increased from 495 HV for nickel-iron film to 846 HV for nickel-iron nanocomposite film with 2 at. % Si. The coercivity of Ni-Fe nanaocomposite films increases with decreasing crystallite size.
APA, Harvard, Vancouver, ISO, and other styles
7

Sekine, Toshimori. "Shock Synthesis of Cubic Silicon Nitride." Journal of the American Ceramic Society 85, no. 1 (December 20, 2004): 113–16. http://dx.doi.org/10.1111/j.1151-2916.2002.tb00050.x.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Orthner, H. R., R. Brink, and P. Roth. "Synthesis of ultrafine silicon nitride powders." International Journal of Materials and Product Technology 15, no. 6 (2000): 495. http://dx.doi.org/10.1504/ijmpt.2000.001261.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Riedel, Ralf, Elisabeta Horvath-Bordon, Hans Joachim Kleebe, Peter Kroll, G. Miehe, P. A. van Aken, and Stefan Lauterbach. "New Ceramic Phases in the Ternary Si-C-N System." Key Engineering Materials 403 (December 2008): 147–48. http://dx.doi.org/10.4028/www.scientific.net/kem.403.147.

Full text
Abstract:
The ultra-high pressure and temperature synthesis of spinel silicon nitride and germanium nitride on the one hand as well as the successful synthesis of tin nitride at ambient pressure on the other hand have caused an enormous impact on both basic science and technological development of advanced nitrides. Aim and scope of the research in this field is to synthesize novel nitrides for structural and functional applications. High presssure nitrides may combine ultra-high hardness with high thermal stability in terms of decomposition in different environments and are expected to show interesting optoelectronic properties. Here, the state of the art and the progress in the field of novel advanced nitrides and related materials synthesized reproducibly under high pressure are reviewed.
APA, Harvard, Vancouver, ISO, and other styles
10

Zakorzhevskii, V. V., and I. P. Borovinskaya. "Combustion synthesis of silicon nitride using ultrafine silicon powders." Powder Metallurgy and Metal Ceramics 48, no. 7-8 (July 2009): 375–80. http://dx.doi.org/10.1007/s11106-009-9155-2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Silicon nitride – Synthesis"

1

Zhang, Xuefei. "Synthesis and Characterization of Zr1-xSixN Thin Film Materials." Fogler Library, University of Maine, 2007. http://www.library.umaine.edu/theses/pdf/ZhangX2007.pdf.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Grenier, Serge. "Large scale carbothermal synthesis of submicron silicon nitride powder." Thesis, McGill University, 1992. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=61211.

Full text
Abstract:
The synthesis of silicon nitride (Si$ sb3$N$ sb4$) by carbothermal reduction of silica was sensitive to the processing steps used for the starting materials (SiO$ sb2$, C) and to the reaction conditions. A good degree of intimacy between the starting materials was required in order to obtain fine ceramic powders.
The formation of Si$ sb3$N$ sb4$ was known to occur over a narrow temperature range (1450-1550$ sp circ$C). The morphology of the silicon nitride powder produced was also shown to vary widely depending on the reaction temperature.
The amount and morphology of the silicon carbide formed was sensitive to impurities present in the precursors prior to the reaction. The nitrogen flow rate during reaction as well as the position of pellets in the reactor played a key role in the final SiC content of the powder.
Results showed that the strength values of two carbothermal powders were excellent (507 and 577 MPa) considering their lower sintered densities which was the result of residual carbon present in the powder. (Abstract shortened by UMI.)
APA, Harvard, Vancouver, ISO, and other styles
3

Middlemas, Michael Robert. "Fabrication, strength and oxidation of molybdenum-silicon-boron alloys from reaction synthesis." Diss., Atlanta, Ga. : Georgia Institute of Technology, 2009. http://hdl.handle.net/1853/28253.

Full text
Abstract:
Thesis (M. S.)--Materials Science and Engineering, Georgia Institute of Technology, 2009.
Committee Chair: Cochran, Joe; Committee Member: Berczik, Doug; Committee Member: Sanders, Tom; Committee Member: Sandhage, Ken; Committee Member: Thadhani, Naresh.
APA, Harvard, Vancouver, ISO, and other styles
4

Vemuri, Prasanna. "Synthesis of cubic boron nitride thin films on silicon substrate using electron beam evaporation." Thesis, University of North Texas, 2004. https://digital.library.unt.edu/ark:/67531/metadc5542/.

Full text
Abstract:
Cubic boron nitride (cBN) synthesis has gained lot of interest during the past decade as it offers outstanding physical and chemical properties like high hardness, high wear resistance, and chemical inertness. Despite of their excellent properties, every application of cBN is hindered by high compressive stresses and poor adhesion. The cost of equipment is also high in almost all the techniques used so far. This thesis deals with the synthesis of cubic phase of boron nitride on Si (100) wafers using electron beam evaporator, a low cost equipment that is capable of depositing films with reduced stresses. Using this process, need of ion beam employed in ion beam assisted processes can be eliminated thus reducing the surface damage and enhancing the film adhesion. Four sets of samples have been deposited by varying substrate temperature and the deposition time. scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), X-ray photoelectron spectroscopy (XPS), and Fourier transform infrared spectroscopy (FTIR) techniques have been used to determine the structure and composition of the films deposited. X-ray diffraction (XRD) was performed on one of the samples to determine the thickness of the film deposited for the given deposition rate. Several samples showed dendrites being formed as a stage of film formation. It was found that deposition at substrate temperature of 400oC and for a period of one hour yielded high quality cubic boron nitride films.
APA, Harvard, Vancouver, ISO, and other styles
5

Jordan, Jennifer Lynn. "Shock-activated reaction synthesis and high pressure response of Ti-based ternary carbide and nitride ceramics." Diss., Georgia Institute of Technology, 2003. http://hdl.handle.net/1853/19674.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Lale, Abhijeet. "Synthesis and characterization of silicon and boron -based nitride nanocomposites as catalytic mesoporous supports for energy applications." Thesis, Montpellier, 2017. http://www.theses.fr/2017MONTT203/document.

Full text
Abstract:
La présente thèse s’inscrit dans un projet collaboratif de type CEFIPRA entre l’Inde (Dr. Ravi Kumar, Department of Metallurgical and Materials Engineering, Indian Institute of Technology-Madras (IIT Madras), Chennai) et la France (Dr. Samuel Bernard, Institut Européen des Membranes, CNRS, Montpellier). Les travaux de thèses se sont consacrés à la synthèse de céramiques de type non-oxyde autour de systèmes binaires (nitrure de silicium et nitrure de bore) et ternaires (Si-M-N, B-M-N (M=Ti, Zr, Hf)) à partir de précurseurs moléculaires et polymères, i.e., la voie polymères précéramiques ou PDCs. L’idée principale de ce travail est de former des structures nanocomposites à partir des systèmes ternaires dans lesquelles des nanocristaux de nitrures métalliques (M=Ti, Zr, Hf) se développent pendant la synthèse du nitrure de silicium et du nitrure de bore. Une caractérisation complète allant des polymères aux matériaux finaux a été conduite. Ces matériaux ont ensuite été préparés sous forme de composés mésoporeux (monolithes) en couplant la voie des polymères précéramiques à une approche de nanomoulage. Ces monolithes à haute surface spécifique et mésoporosité interconnectée ont alors été appliqués comme support de nanoparticules de platine pour l’hydrolyse du borohydrure de sodium pour générer de l’hydrogène. Les performances en tant que support de catalyseur ont été évaluées en termes de volume d’hydrogène libéré et de reproductibilité. Nous avons montré que les nanocomposites TiN/Si3N4 de surface spécifique très élevée présentent les meilleures performances grâce à l’activité catalytique du Si3N4 amorphe, de la présence de TiN nanométrique et de l’effet synergétique entre les nanoparticules Pt, le TiN nanostructuré et le Si3N4 amorphe. En preuve de concept, nous avons montré que ces structures nanocomposites étaient multifonctionnelles: elles peuvent être appliquées en tant que supports d’électro-catalyseurs et matériaux d’électrodes dans les piles à combustibles et les super-condensateurs, en particulier pour ceux contenant des matériaux lamellaires 2D et du carbone libre
The thesis has been funded by a collaborative research partnership between Indian (Dr. Ravi Kumar, Department of Metallurgical and Materials Engineering, Indian Institute of Technology-Madras (IIT Madras), Chennai) and French institutes (Dr. Samuel Bernard, European Membrane Institute, CNRS, Montpellier), IFCPRA/CEFIPRA. It is focused on the synthesis, and characterization of binary (silicon nitride and boron nitride) and ternary (Si-M-N, B-M-N (M = Ti, Zr, Hf)) ceramics which are prepared through a precursor approach based on the Polymer-Derived Ceramics (PDCs) route. The idea behind the preparation of the ternary systems is to form nanocomposite structures in which metal nitrides (M = Ti, Zr, Hf) nanocrystals grow during the synthesis of silicon nitride and boron nitride. A complete characterization from the polymer to the final material is done. Then, these materials have been prepared as mesoporous monoliths coupling the PDCs route with a nanocasting approach to be applied as supports of platinum nanoparticles for the hydrolysis of liquid hydrogen carriers such as sodium borohydride. The performance as catalyst supports has been evaluated in terms of volume of hydrogen released and reproducibility. We showed that the very high specific surface area TiN/Si3N4 nanocomposites displayed the best performance because of the catalytic activity of amorphous Si3N4, the presence of nanoscaled TiN and the synergetic effect between Pt nanoparticles, nanoscaled TiN and amorphous Si3N4. Interesting, these materials are multi-functional as demonstrated as a proof of concept: they can be applied as electrocatalyst supports, electrode materials for fuel cells and supercapacitors, in particular those containing 2D layered materials and free carbon
APA, Harvard, Vancouver, ISO, and other styles
7

Abass, Monsuru A. "Boron nitride nanotube-modified silicon oxycarbide ceramic composite: synthesis, characterization and applications in electrochemical energy storage." Thesis, Kansas State University, 2017. http://hdl.handle.net/2097/35423.

Full text
Abstract:
Master of Science
Department of Mechanical and Nuclear Engineering
Gurpreet Singh
Polymer-derived ceramics (PDCs) such as silicon oxycarbide (SiOC) have shown promise as an electrode material for rechargeable Li-ion batteries (LIBs) owing to the synergy between its disordered carbon phase and hybrid bonds of silicon with oxygen and carbon. In addition to their unique structure, PDCs are known for their high surface area (~822.7 m² g⁻¹), which makes them potential candidates for supercapacitor applications. However, low electrical conductivity, voltage hysteresis, and first cycle lithium irreversibility have hindered their introduction into commercial devices. One approach to improving charge storage capacity is by interfacing the preceramic polymer with boron or aluminium prior pyrolysis. Recent research has shown that chemical interfacing with elemental boron, bulk boron powders and even exfoliated sheets of boron nitride leads to enhancements in thermal and electronic properties of the ceramic. This thesis reports the synthesis of a new type of PDC composite comprising of SiOC embedded with boron nitride nanotubes (BNNTs). This was achieved through the introduction of BNNT in SiOC pre-ceramic polymer at varying wt.% loading (0.25, 0.5 and 2.0 wt.%) followed by thermolysis at high temperature. Electron microscopy and a range of spectroscopy techniques were employed to confirm the polymer-to-ceramic transformation and presence of disordered carbon phase. Transmission electron microscopy confirmed the tubular morphology of BNNT in the composite. To test the material for electrochemical applications, the powders were then made into free-standing paper-like electrodes with reduced graphene oxide (rGO) acting as support material. The synthesized free-standing electrodes were characterized and tested as electrochemical energy storage materials for LIBs and symmetric supercapacitor applications. Among the SiOC-BNNT composite paper tested as anode materials for LIBs, the 0.25 wt.% BNNT composite paper demonstrated the highest first cycle lithiation capacity corresponding to 812 mAh g⁻¹ (at a current density of 100 mA g⁻¹) with a stable charge capacity of 238 mAh g⁻¹ when asymmetrically cycled after 25 cycles. On the contrary, the 0.5 wt.% BNNT composite paper demonstrated the highest specific capacitance corresponding to 78.93 F g⁻¹ at a current density of 1 A g⁻¹ and a cyclic retention of 86% after 185 cycles. This study shows that the free carbon content of SiOC-BNNT ceramic composite can be rationally modified by varying the wt.% of BNNT. As such, the paper composite can be used as an electrode material for electrochemical energy storage.
APA, Harvard, Vancouver, ISO, and other styles
8

Roussey, Arthur. "Preparation of Copper-based catalysts for the synthesis of Silicon nanowires." Thesis, Lyon 1, 2012. http://www.theses.fr/2012LYO10164.

Full text
Abstract:
Les travaux dans cette thèse ont pour objectif la synthèse de catalyseurs (nanoparticules de cuivre) de taille contrôlée pour la synthèse de nanofils de silicium dans des conditions compatibles CMOS, c'est-à-dire en évitant l'utilisation de l'or comme catalyseur et pour des croissances basse température (<450°C). Les résultats obtenus ont permis de montrer que les techniques de chimie de surface classiquement utilisées pour la préparation de catalyseurs sur des supports 3D (silice, nitrure de titane…) sont directement applicables et transférables sur des supports 2D (wafer de silicium recouvert de films fins de SiO2, SiOx et TiN). Nous avons par exemple pu préparer des nanoparticules de cuivre de taille contrôlée (de 3 nm à 40 nm de diamètre moyen suivant les conditions expérimentales et supports). De plus, les mécanismes de formation des nanoparticules en fonction des propriétés de surface des matériaux étudiés ont été démontrés en combinant diverses techniques d'analyses de surface. La croissance de nanofils de silicium à partir de ces catalyseurs sur substrats 2D a également été réalisée avec succès dans des procédés à basse température. Il a notamment été montré l'existence d'un diamètre minimum critique à partir de laquelle la croissance basse température était possible
The work presented in this PhD thesis aimed at the preparation of copper nanoparticles of controllable size and their utilization as catalysts for the growth of silicon nanowires in a process compatible with standard CMOS technology and at low temperature (< 450°C). The growth of silicon nanowires by Chemical Vapor Deposition (CVD) via the catalytic decomposition of a silicon precursor on metallic nanoparticles at low temperature (Vapor Solid-Solid process) was demonstrated to be possible from an oxidized Cu thin film. However, this process does not allow the control over nanowires diameter, which is controlled by the diameter of the nanoparticle of catalyst. In this PhD is presented a fully bottom-up approach to prepare copper nanoparticles of controllable size directly on a surface without the help of external stabilizer by mean of surface organometallic chemistry. First, the preparation of copper nanoparticles is demonstrated on 3D substrates (silica and titanium nitride nanoparticles), along with the fine comprehension of the formation mechanism of the nanoparticles as a function of the surface properties. Then, this methodology is transferred to planar (2D) substrates typically used in microelectronics (silicon wafers). Surface structure is demonstrated to direct the Cu nanoparticles diameter between 3 to 40 nm. The similarities between the 2D and 3D substrates are discussed. Finally, the activity of the Copper nanoparticles in the growth of Silicon nanowire is presented and it is demonstrated that in our conditions a critical diameter may exist above which the growth occurs
APA, Harvard, Vancouver, ISO, and other styles
9

Xiao, Zhigang. "Synthesis of Functional Multilayer Coatings by Plasma Enhanced Chemical Vapor Deposition." Cincinnati, Ohio : University of Cincinnati, 2004. http://rave.ohiolink.edu/etdc/view?acc%5Fnum=ucin1081456822.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Shah, Syed Imran Ullah. "Synthesis of transition metal nitrides and silicon based ternary nitrides." Thesis, University of Southampton, 2013. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.580538.

Full text
Abstract:
Solution phase ammonolysis and sol-gel techniques that produce polymeric metal-amide precursors are of growing interest in the synthesis of nitride materials, which result from the thermal decomposition of the polymer. They can be used to control composition and to produce a large number of useful morphologies such as nanoparticles, films, monoliths, aerogels, and materials with large surface area such as foams. The synthesis of nitride materials using ammonolysis of metal amides and chlorides has so far largely focused on producing powders for applications such as catalysis, or thin films by chemical vapour deposition and related techniques. In this thesis, formation of tantalum and molybdenum nitride nanoparticles and metal-silicon nitride based nanocomposites have been synthesised using non-oxide precursors by solution phase ammonolysis and sol-gel methods respectively. For tantalum nitride nanoparticles Ta(NMe2)5 in THF was ammonolysed with ammonia at - 78 QC and the polymeric precursor was pyrolysed at various temperatures under ammonia. Amorphous TaN was obtained at 700 QC and below, while Ta3Ns was obtained at 800 QC under ammonia and also by re-annealing the amorphous samples at 800 QC under nitrogen. Molybdenum nitride powders were obtained by solution phase ammonolysis of MoCl, or Mo(NMe2)4 and further annealing the polymeric precursors on different temperatures. The chloride precursor resulted in hexagonal Mo'N, at 500 QC, or rock salt Mobl, at 700-1000 QC and mixture of both at 600 QC. The amide precursor resulted phase pure hexagonal MoNx at 600 QC and rock salt mixed with hexagonal at 1000 QC. Samples produced at 600 QC consisted mainly of nanotubes. Some decomposition to molybdenum metal was found in MoN obtained at 1000 QC from either precursor source. Co-ammonolysis of Ta(NMe2)5 or Mo(NMe2)4 with Si(NHMe)4 was carried out using sol-gel technique. Polymeric metal-silicon amide precursors were annealed at 600 or 1000 QC. The Ta/Si precursor produced amorphous nanocomposites and no phase segregation was observed even after high temperature annealing. With molybdenum the products were nanocomposites of molybdenum nitride particles, including nanotubes, supported on a silicon nitride amorphous matrix.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Silicon nitride – Synthesis"

1

Hierra, Emiliano Jose, and Jesus Anjel Salazar. Silicon nitride: Synthesis, properties, and applications. Hauppauge, N.Y: Nova Science Publishers, 2011.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Schulz, Oliver. Synthese sinteraktiver Siliciumnitridpulver im induktiven, thermischen Plasma. Regensburg: S. Roderer, 1988.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Gromov, Alexander, and Liudmila Chukhlomina. Nitride Ceramics: Combustion Synthesis, Properties, and Applications. Wiley-VCH Verlag GmbH, 2014.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Lin, Dah-cheng. Kinetic study on the synthesis of Si₃N₄ via the ammonization of SiO vapor. 1995.

Find full text
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Silicon nitride – Synthesis"

1

Zhang, Ke, Qiang Zhang, Peng Fei Wang, Ling Bai, Wei Ping Shen, and Chang Chun Ge. "Silicon Nitride/Boron Nitride Composite by Combustion Synthesis." In Materials Science Forum, 531–34. Stafa: Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-462-6.531.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Wang, Qi, Jungang Hou, and Hongmin Zhu. "Synthesis and Characterization of Amorphous Silicon Nitride Nanoparticals and α-Silicon Nitride Nanowires." In TMS2015 Supplemental Proceedings, 317–23. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2015. http://dx.doi.org/10.1002/9781119093466.ch39.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Wang, Qi, Jungang Hou, and Hongmin Zhu. "Synthesis and Characterization of Amorphous Silicon Nitride Nanoparticals and α-Silicon Nitride Nanowires." In TMS 2015 144th Annual Meeting & Exhibition, 317–23. Cham: Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-48127-2_39.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Zhang, Ke, Ling Bai, Wei Ping Shen, and Chang Chun Ge. "Low-Pressure Preheating Combustion Synthesis of Silicon Nitride." In Advanced Materials Research, 441–44. Stafa: Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-463-4.441.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Xie, Zhi Peng, Wei You Yang, He Zhuo Miao, Li Gong Zhang, and Li Nan An. "Synthesis and Growth Mechanism of Silicon Nitride Nanostructures." In Materials Science Forum, 1239–42. Stafa: Trans Tech Publications Ltd., 2005. http://dx.doi.org/10.4028/0-87849-960-1.1239.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Milonjić, S. K., L. J. S. Čerović, and D. P. Uskoković. "Sol-Gel Synthesis of Silicon Carbide and Silicon Nitride Powders and Their Surface Properties." In Materials Science of Carbides, Nitrides and Borides, 343–58. Dordrecht: Springer Netherlands, 1999. http://dx.doi.org/10.1007/978-94-011-4562-6_20.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Rosa, Massimo, Francesco Casaril, Massimiliano Valle, and Stefano Poli. "Optimization of the Industrial Synthesis of Silicon Carbide - Reaction Bonded Silicon Nitride (SiC-RBSN)." In Developments in Strategic Materials and Computational Design V, 245–57. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2015. http://dx.doi.org/10.1002/9781119040293.ch22.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Balázsi, Csaba. "Synthesis and Novel Application of Nanomaterials in Tungstate, Titania and Silicon Nitride Systems." In Nanostructures: Synthesis, Functional Properties and Applications, 655–73. Dordrecht: Springer Netherlands, 2003. http://dx.doi.org/10.1007/978-94-007-1019-1_39.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Vongpayabal, Panut, and Shoichi Kimura. "Nano-Sized Silicon Nitride Powder Synthesis via Ammonolysis of SiO Vapor." In Ceramic Transactions Series, 13–20. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2012. http://dx.doi.org/10.1002/9781118406083.ch2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Saulig-Wenger, Ratine, Mikhael Bechelany, David Cornu, Samuel Bernard, Fernand Chassagneux, Philippe Miele, and Thierry Epicier. "Synthesis and Characterization of Cubic Silicon Carbide (β-SiC) and Trigonal Silicon Nitride (α-Si3N4) Nanowires." In Synthesis and Processing of Nanostructured Materials: Ceramic Engineering and Science Proceedings, Volume 27, Issue 8, 81–88. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2008. http://dx.doi.org/10.1002/9780470291375.ch9.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Silicon nitride – Synthesis"

1

Dan Liu, Tielin Shi, Lei Zhang, Shuang Xi, Zirong Tang, Xiaoping Li, and Wuxing Lai. "Bulk synthesis of long silicon nitride nanowires on silicon wafer." In 2011 IEEE Nanotechnology Materials and Devices Conference (NMDC 2011). IEEE, 2011. http://dx.doi.org/10.1109/nmdc.2011.6155280.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Sain, Basudeb, and Debajyoti Das. "Low temperature plasma synthesis of photoluminescent nanocrystalline silicon-nitride." In SOLID STATE PHYSICS: Proceedings of the 56th DAE Solid State Physics Symposium 2011. AIP, 2012. http://dx.doi.org/10.1063/1.4710005.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Yunoshev, A. S. "Shock-Wave Synthesis and HPHT Sintering of Cubic Silicon Nitride." In SHOCK COMPRESSION OF CONDENSED MATTER - 2005: Proceedings of the Conference of the American Physical Society Topical Group on Shock Compression of Condensed Matter. AIP, 2006. http://dx.doi.org/10.1063/1.2263533.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Shin, K. S., B. B. Sahu, J. S. Lee, K. Takeda, M. Hori, and J. G. Han. "Low Temperature Synthesis of Silicon Nitride Thin Film by UHFAssisted RF PECVD." In Society of Vacuum Coaters Annual Technical Conference. Society of Vacuum Coaters, 2014. http://dx.doi.org/10.14332/svc14.proc.1811.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Chen, F., Z. Huang, Q. Shen, L. Zhang, and E. Lavernia. "Synthesis and Photoluminescence of Single-Crystal Silicon Nitride Nanowires via Nitriding of Cryomilled Nanocrystalline Silicon Powder." In MS&T17. MS&T17, 2017. http://dx.doi.org/10.7449/2017/mst_2017_1125_1128.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Chen, F., Z. Huang, Q. Shen, L. Zhang, and E. Lavernia. "Synthesis and Photoluminescence of Single-Crystal Silicon Nitride Nanowires via Nitriding of Cryomilled Nanocrystalline Silicon Powder." In MS&T17. MS&T17, 2017. http://dx.doi.org/10.7449/2017mst/2017/mst_2017_1125_1128.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Nasrazadani, S. "Synthesis of Cubic Boron Nitride Thin Films on Silicon Substrate Using Electron Beam Evaporation." In CHARACTERIZATION AND METROLOGY FOR ULSI TECHNOLOGY 2005. AIP, 2005. http://dx.doi.org/10.1063/1.2063010.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Ghazali, N. M., M. R. Mahmood, K. Yasui, and A. M. Hashim. "Synthesis of Gallium Nitride Nanostructure by Ammoniating the Electrochemically Deposited Gallium Oxide on Silicon Substrate." In 2014 International Conference on Solid State Devices and Materials. The Japan Society of Applied Physics, 2014. http://dx.doi.org/10.7567/ssdm.2014.c-3-3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Shen, X., and S. Lei. "Distinct Element Simulation of Laser Assisted Machining of Silicon Nitride Ceramics: Surface/Subsurface Cracks and Damage." In ASME 2005 International Mechanical Engineering Congress and Exposition. ASMEDC, 2005. http://dx.doi.org/10.1115/imece2005-80545.

Full text
Abstract:
This paper applies distinct element method (DEM) to simulate the material removal process of laser assisted machining of silicon nitride ceramics and show the formation and propagation of surface/sub-surface cracks and damage. A synthetic specimen is created using particle clusters to approximate the granular microstructure of β-type silicon nitride ceramics. The effect of temperature on machining is considered by its influence on the material properties. In addition, some other parameters such as rake angle, depth of cut, local damping coefficient and cluster size are also considered in a parametric study. It shows that all these parameters influence surface/sub-surface cracks and chip formation of silicon nitride ceramics in laser assisted machining.
APA, Harvard, Vancouver, ISO, and other styles
10

Wang, L., R. J. K. Wood, H. E. G. Powrie, E. Streit, and I. Care. "Performance Evaluation of Hybrid (Ceramic on Steel) Bearings With Advanced Aircraft Engine Oils for Lubrication." In ASME Turbo Expo 2004: Power for Land, Sea, and Air. ASMEDC, 2004. http://dx.doi.org/10.1115/gt2004-53418.

Full text
Abstract:
Hybrid bearings (silicon nitride rolling elements and steel raceways) are being developed for the new generation of gas turbine engines, as they offer weight savings, reduced heat rejection and can operate at higher DN (bore diameter in mm × shaft rotational speed in rpm) values than conventional steel bearings. In the present study, various advanced synthetic aviation oils were tested on a pin-on-disc tribometer. Conditions were chosen to simulate engine low load and ambient start up, where sliding is a factor. The tests used a silicon nitride ball sliding against an M50NiL bearing steel disc. Fresh oils were tested for the hybrid contacts under high sliding speed of 7 ms−1 and normal aircraft engine bearing contact pressure of 2.8 GPa [1]. The results showed that most of the synthetic aviation oils in use today would provide similar protection for the hybrid contacts against scuffing. Initial studies, aimed at identifying the influence of oil degradation and effects of additive depletion are also presented. The oils were ranked based on the contact wear rate. Electrostatic charge measurements were made along with wear, friction and surface temperature measurements to monitor the on-line wear conditions [2–3]. Electrostatic sensing shows promise as a monitoring technique for oil lubricated hybrid contacts. Polishing wear mechanisms and iron-based material transfer from disc to ball were identified by Field Emission Gun Scanning Electron Microscopy (FEG-SEM) and Energy-Dispersive X-ray (EDX) as the dominant degradation process in these hybrid contacts.
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Silicon nitride – Synthesis"

1

Buss, R. J., P. Ho, and S. V. Babu. Synthesis of silicon nitride powders in pulsed RF plasmas. Office of Scientific and Technical Information (OSTI), May 1995. http://dx.doi.org/10.2172/72971.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Buss, R. J. Rf-plasma synthesis of nanosize silicon carbide and nitride. Final report. Office of Scientific and Technical Information (OSTI), February 1997. http://dx.doi.org/10.2172/453776.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Kingon, A. I., R. F. Davis, and A. K. Singh. Integrated Synthesis and Post Processing of Silicon Carbide and Aluminum Nitride. Fort Belvoir, VA: Defense Technical Information Center, December 1990. http://dx.doi.org/10.21236/ada230810.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Olson, D. B., and H. F. Calcote. A New Process for Synthesis of Silicon Nitride Powders for Advanced Ceramics. Fort Belvoir, VA: Defense Technical Information Center, November 1987. http://dx.doi.org/10.21236/ada189354.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Silicon nitride – Synthesis' for particular source types:
Journal articles Dissertations / Theses
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography