Academic literature on the topic 'SILKA and YTONG System'

This diploma thesis describes the design and elaboration of project documentation for realisation of construction of building of Guest house in municipality Ostravice. The building is situated on parcel 649/13 - arable land, in cadastral area Ostravice-1. Guest house is primarily intended for temporary accommodation of tourists in Beskydy mountains. The part of the building is restaurant as well as wellness centre with fitness gym. The building is situated in partially urbanised section of municipality. The access from the local road to parcel n. 470/20 to the main entrance into building will be enabled by newly purpose-built road with turnaround for passenger vehicles. The design respects the local plan and does not deviate from the character of the surrounding built-up area. The building has three above-ground floors and one underground floor, which is situated only under a part of the building. Project documentation is elaborated in conformity with effective laws, public notices and standards. Building of guesthouse is designed as wall system, with brick supporting walls made out of gas-silicate blocks and sand-lime bricks. The guest house is covered by two flat roofs with different inclination and with different height of ridges. The façade consists of stucco and for the third above-ground floor the façade is made out of ventilated larch-wood panelling. The building is placed in flat terrain.

The subject of this diploma thesis is a new building of polyfunctional house in the cadastral territory of Komárov. The building is situated in a almost straight terrain in the building land. The house has four above-ground floors. On the firt floor there is wine bar and hairdresser’s. On the seconf floor there are administrative areas ane on the third and fourth floor there are six flats. On the land there asi also playground and two parking lots for cars. The supporting walls are made of blocks Silka. The object is roofed by flat roof.

The subject of this diploma thesis is a project of boarding house. The building is situated in moderate slope terrain in cadastral territory Znojmo-město. Boarding house capacity is 36 beds. Boarding house has three floors and is designed from the structural system Ytong. The ceilings are made of filigree floor panels. The roof of the house is built as flat vegetation roof. In the first floor there is located main entrance, reception desk and dining room. In the second and third floor there are rooms for guests.

The subject of this diploma thesis is a design documentation of multi-functional building. The building has a basement and four above-ground floors. The basement is served as an APS garage. The ground floor contains commercial premises as a bistro, copy centre and hairdresser's. The first floor is used for offices. The third and the fourth floors contain two maisonette with roof decks. Structural system is masonry systém of lightweight concrete block Ytong and RC’s elements. A roof is design as warm flat roof with waterproof membrane of m-PVC foil. Dominant elements are a ventilated cladding Cembrit and glass facade oriented on south-east.

This diploma thesis aims to prepare documentation for the execution of the project. This is a reconstruction of object pool primary school Pastviny. Primary school is situated on the territory of the Jihomoravský region in the Brno. Diploma thesis include two outbuilding, one is the entrance of building and the second are auxiliary facilities, and extension classrooms. The building is designed as a brick building , where the vertical and horizontal structures are designed from the structural system Ytong. It has two floors and is covered with a flat roof.

The subject of this diploma thesis is the elaboration of project documentation for the construction of a new multifunctional building. The building will be located in the city of Brno, in the district of Zábrdovice, in street Vlhká. The building is divided into residential units, offices, a dental office, a café and a technical background. The building is designed as a terrace house in blank space, non-basement and with four above-ground floors. The residential part has 2 flats 3+kk. Part of the residential areas includes storage areas and garage. Non-residential premises include a café with hygienic facilities, administrative part of individual offices, storages and hygienic premises, dental office with waiting room and background for employees and technical facilities – technical room and air-condition machinery. There are 17 parking places, of which 1 for people with limited mobility and 1 for motorbike. The object is based on piles. The peripheral load-bearing structures are walled of sand-lime blocks. The ceiling structure consists of prestressed ceiling panels. The building is sheltered by hipped roof, which is made of gang-nailed-connected timber truss. The stairs are prefabricated. During processing the emphasis was put on the appropriate layout, building-construction and architectural design and safe use of the building. Project documentation is processed in Allplan.

The thesis deals with a new hotel construction in Brno. The paper aims to elaborate a project documentation for the construction of the building. It is a detached building in a slightly sloping terrain. The building has three floors and one underground floor. On the underground floor there are jointly-shared garages and technical background of the hotel. On the first floor there is a reception, a restaurant, a café and an open-air terrace. The second and the third floor is designed to accommodate guests in double rooms and suites. There is also a manager´s office and a conference room. The bearing construction consists of a ferroconcrete skeleton with a bricked outside envelope of aerated concrete blocks Ytong. The skeletal construction is built on a monolithic foundation footings. The building is covered in a flat single-coat roof which is partly designed as a vegetation roof. The facade of the building is glazed in the northern part of the 1st floor and some parts of the facade are coloured green, the others are of various colours. The building is insulated with a contact insulation system.

The diploma thesis deals with a new construction of a sports complex facility in Žďár nad Sázavou, Vysočina region. It aims to develop project documentation for construction work. The building is located near the town’s centre, on the unconstructed land under the town’s ownership. The object is supposed to serve as a facility for athletes. The building’s plan is regularly-shaped, formed to the letter “L”. It has two above-ground and one underground floors. In the object, there are a wellness area, gym, dressing room, restaurant, administrative part, and an apartment for the manager of the building. This is a classic brick building, which is based on both strip foundations and square footings. Bearing perimeter walls in the underground floor are formed from lost formwork. Bearing perimeter walls in the above-ground floors are formed from Porotherm cut ceramic blocks. The ceilings are made of Spiroll panels. Partition walls consist of Porotherm non-bearing cut ceramic blocks. The object is roofed by a flat single-skin roof and a vegetation roof. All external walls are insulated with a contact thermal insulation system.