Relevant bibliographies by topics / Silo building

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Silo building'

Author: Grafiati
Published: 4 June 2021
Last updated: 1 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Silo building.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Silo building"

1

Saakian, Alexander. "Evaluation of the reliability of the silo housing." АгроЭкоИнфо 4, no. 46 (July 18, 2021): 3. http://dx.doi.org/10.51419/20214403.

Full text
Abstract:
The results of the survey of reinforced concrete structures of the silo building are presented. The assessment of the technical condition and reliability of the frame of the structure is given, recommendations for the operation of the building are given. Keywords: SILO BUILDING, INSPECTION, ASSESSMENT OF TECHNICAL CONDITION, REINFORCED CONCRETE STRUCTURES, RELIABILITY
APA, Harvard, Vancouver, ISO, and other styles
2

Gan, Hong, and Yi Zhen Yang. "Analysis of the Mechanical Properties of Cement Silo Structure." Applied Mechanics and Materials 423-426 (September 2013): 1234–37. http://dx.doi.org/10.4028/www.scientific.net/amm.423-426.1234.

Full text
Abstract:
Cement silo belonging to special structure, widely used in the cement industry, cement production is essential in the process of building. With the development of society, advances in industrial, cement silo construction have been expanding. This is an update to a cement silo structure, using finite element analysis, calculation and analysis in the context of full and half given mechanical properties, with ANSYS simulation modeling in order to get weak cement silo structure location, and design improvements for the weak position.
APA, Harvard, Vancouver, ISO, and other styles
3

Nugrahani, Elita Fidiya, Izzati Winda Murti, and Qurrotin M. O. Arifianti. "Analysis on energy use in reuse cement silo for campus building." IOP Conference Series: Earth and Environmental Science 126 (March 2018): 012012. http://dx.doi.org/10.1088/1755-1315/126/1/012012.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Carson, John W. "Limits of Silo Design Codes." Practice Periodical on Structural Design and Construction 20, no. 2 (May 2015): 04014030. http://dx.doi.org/10.1061/(asce)sc.1943-5576.0000227.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Gurfinkel, German. "Restoring an Impaired Concrete Silo." Journal of Performance of Constructed Facilities 3, no. 2 (May 1989): 87–99. http://dx.doi.org/10.1061/(asce)0887-3828(1989)3:2(87).

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Ghalibafian, Mehdi, and Ramin Azarin. "Rehabilitation of a Grain Silo Complex, Iran." Structural Engineering International 7, no. 3 (August 1997): 184. http://dx.doi.org/10.2749/101686697780494707.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Belous, A. N., E. A. Dmitrenko, Ya Yu Goncharova, and O. E. Belous. "REDUCTION OF HEAT-MOISTURE IMPACT ON REINFORCED CONCRETE SILO FOR STORING CEMENT CLINKER." Vestnik Tomskogo gosudarstvennogo arkhitekturno-stroitel'nogo universiteta. JOURNAL of Construction and Architecture, no. 6 (December 29, 2019): 162–73. http://dx.doi.org/10.31675/1607-1859-2019-21-6-162-173.

Full text
Abstract:
The paper analyzes various constructional options for insulation of load-bearing structures of reinforced concrete silo. Based on the analysis, the optimum insulation was selected according to the minimum temperature difference in the wall thickness. Factors affecting the heat-moisture characteristics of the walls of reinforced concrete silo are identified. The influence of heat-conducting inclusions on the heat-moisture characteristics of the building envelope is estimated. The temperature differences in the silo wall thickness are detected. The temperature and humidity are calculated for various design options and the moisture accumulation percentage of the con-struction is calculated for the specified time period.
APA, Harvard, Vancouver, ISO, and other styles
8

Gilbertson, Alan. "Failure of a Silo in a Sinter Plant." Structural Engineering International 6, no. 4 (November 1996): 285. http://dx.doi.org/10.2749/101686696780496256.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Henman, Linda D. "Silo busting makes good business sense." Strategic HR Review 19, no. 4 (May 13, 2020): 151–56. http://dx.doi.org/10.1108/shr-03-2020-0022.

Full text
Abstract:
Purpose The purpose of this study is to help these leaders position themselves for the new economy, to help them see what the author has seen. As the author’s clients emerged from the global economic turmoil that began in 2008, they indicated they had learned numerous lessons – the most important one: when leaders make good decisions, little else matters. When they refuse to make decisions, or show a pattern of making bad ones, nothing else matters. Helping these leaders position themselves for the new economy, the author could see what others did not. Design/methodology/approach Something was standing in their way – usually the unwillingness or inability to demand cohesion and teamwork. In many cases, they thought they needed more – more education, more experience, more time or more data. They did not realize they had enough of these, but they did lack the confidence, courage and optimism to make the changes that many would resist. Findings Through this work together, the most successful leaders realized they could no longer push growth. Instead, they had to remove barriers to success and usually these barriers were of their own making. They needed to understand how to leverage their strengths, remove their silo-building behaviors and replace them with silo-busting decisions. Originality/value These compelling stories and surprising research findings in this paper focus on real people, who actively sought professional improvement and personal development. Working together, the author and others mapped out their journeys, identified the key roadblocks they faced, recognized the wrong turns they had taken and unlocked their decision-making potential – all the while navigating an increasingly uncertain world and, in some cases, more than doubling the size of their companies.
APA, Harvard, Vancouver, ISO, and other styles
10

Saleem, Muhammad Umair, Hassan Khurshid, Hisham Jahangir Qureshi, and Zahid Ahmad Siddiqi. "A Simplified Approach for Analysis and Design of Reinforced Concrete Circular Silos and Bunkers." Open Construction and Building Technology Journal 12, no. 1 (October 23, 2018): 234–50. http://dx.doi.org/10.2174/1874836801812010234.

Full text
Abstract:
Background: Reinforced concrete silos and bunkers are commonly used structures for large storage of different materials. These structures are highly vulnerable when subjected to intense seismic forces. Available guidelines for analysis and design of these structures require special design skills and code procedures. Objective: The current study is aimed to elaborate the design procedures from different sources to a unified method, which can be applied to a larger class of reinforced concrete silos. In this study, analysis and design procedures are summarized and presented in a simplified form to make sure the efficient practical design applications of reinforced concrete silos. Method: Four different cases of silo design based on the type and weight of stored material were considered for the study. For each case, the silo was designed using given design procedure and modeled using FEM-based computer package. All of the reinforced concrete silos were subjected to gravity, wind and seismic forces. Results: After performing the analysis and design of different silos, the bending moment, shear force and axial forces profiles were given for a sample silo. The results obtained from the proposed design procedure were compared with FEM values for different components of silos such as slab, wall and hopper. Conclusion: The comparison of tangential and longitudinal forces, bending moments, shear forces and reinforcement ratios of different parts of silos have shown a fair agreement with the FEM model results. It motivates to use the proposed design procedure for an efficient design of reinforced concrete silos.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Silo building"

1

Halaf, Evan. "FORMSÄTTNING AV HÖGA PLATSGJUTNA BETONGKOSTRUKTIONER : Undersökning av diverse klättersystem samt alternativa lösningar för silo-projektet Gråbergsutfrakt i Kiruna." Thesis, Mälardalens högskola, Akademin för ekonomi, samhälle och teknik, 2020. http://urn.kb.se/resolve?urn=urn:nbn:se:mdh:diva-49300.

Full text
Abstract:
Today construction industry is building higher and more complicated constructions than ever thanks to the advancements in materials, technical knowledge and methodologies. One important material is concrete, which has been used to create impressive architectural marvels. This dissertation aims to examine the differences between climbing and slip formwork systems for tall concrete structures that require several pouring steps in height. The main differences noted between both systems are formwork configuration, assembly and cycling of the formwork and climbing elements, price and quantity of material, labor required, the quality of the finished structure and safety during construction. A case study was investigated with the help of formwork supplier PERI Sverige AB and nordic contractor PEAB AB regarding a 20,5 meter high reinforced concrete silo located in a mining complex in Kiruna, Sweden. Through a review of the existing literature in the subject, interviews with experts in the topic and the outcome from the project case study, the results shows that while the SCS climbing system from PERI Sverige AB required more working days compared to a slip formwork system, it was chosen as a more appropriate solution for this project in combination with the crane at the jobsite, due to the amount of labor required, safety and overall cost of it. In conclusion, the selection of the SCS climbing system as formwork system proved to be the most adequate solution for the case study when critical aspects such as assembly and cycling of formwork, price and safety were evaluated.
APA, Harvard, Vancouver, ISO, and other styles
2

Wang, Qijue. "Nanofibrils As The Basic Building Blocks Of Spider Silk." W&M ScholarWorks, 2020. https://scholarworks.wm.edu/etd/1593092048.

Full text
Abstract:
Spider silk is a natural high-performance biopolymer with superior mechanical properties, resulting from its hierarchical structure. With protein nanofibrils observed in various spider and silkworm silks, the critical role of nanofibrils in achieving the silk's mechanical behavior has been widely suggested by both experimental observations and numerical simulations. However, a close review of available evidence of silk nanofibrils reveals many crucial aspects are still largely ambiguous or unknown. This further hinders the development of advanced silk-based materials. The simple structure of the ribbon-like recluse (Loxosceles) silk provides an ideal opportunity to investigate silk nanofibrils. By studying the surface and internal structure of this silk, we showed that it is entirely composed of nanofibrils. Since the recluse ribbons exhibit the outstanding mechanical properties typical of a good spider silk, we can conclude that the properties of recluse ribbons are already implemented at the level of an individual nanofibril. Furthermore, we took advantage of this system to study the protein makeup of pristine silk nanofibrils. Using both polarized FTIR and Raman spectroscopy, we presented the first-ever vibrational spectra of silk nanofibrils. We were able to identify the presence of different secondary structures, as well as their volumetric percentages and orientations. A detailed structure model of recluse silk was proposed based on our results. To relate the presence of nanofibrils to the natural silk spinning process, we investigated the self-assembly behavior of the native spider spidroin. Both individual and networks of long, thin silk nanofibrils were observed in the presence of shear force and a proper ion concentration. This unprecedented observation suggests the intrinsic tendency of native silk spidroin to form nanofibrils. In summary, through an extensive investigation of the organization, protein makeup, and formation of silk nanofibrils in various natural and in-vitro systems, we revealed the fundamental role of nanofibrils as the basic building blocks of natural spider silk. This will have wide-ranging implications on the understanding of the structure-property relations of spider silk and the development of silk-inspired high-performance materials.
APA, Harvard, Vancouver, ISO, and other styles
3

Vochyán, David. "Administrativní budova ESKO-T, stavebně technologický projekt." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2017. http://www.nusl.cz/ntk/nusl-265518.

Full text
Abstract:
The aim of this thesis is compile building and technological project of new office building of the company ESKO-T in Třebíč. This is a two-storey building, build technology cast-in-place longitudinal reinforced concrete frame with mono-pitched roof. Work is consist of a possible solution of steel, concrete and formwork of rental shop to building. Building and technological project, technological regulation for concreting, draft machine configuration, documentation broker transport relations, the crane card and concrete pump, control od worte quality, time schedule and building budget rough upper construction, environmental protection, occupational safety and health, object work schedule and price comparison concreting with hanging silo for concrete and concrete pump.
APA, Harvard, Vancouver, ISO, and other styles
4

De, Danieli Filippo. "Silk Road mafias : the political economy of drugs and state-building in post-Soviet Tajikistan." Thesis, SOAS, University of London, 2010. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.545920.

Full text
Abstract:
This study looks at the role of drug-related mafias in Tajikistan -a country that has undergone a `double transition' as a result of the break up of the Soviet Union and a protracted civil war -, and examines why they emerged as political, economic and social actors after 1991 and how they influenced the processes of state breakdown and post conflict state-building. The existing literature on drug trafficking in Central Asia focuses almost exclusively on the connections between "criminal" and "terrorist" networks. This study, based upon field work conducted in Tajikstan between March-December 2007, critically challenges the arguments, concepts and assumptions that are usually associated with the "narcoterror" discourse. It seeks to adopt a broader historical, political economy perspective, and draws upon the growing literature on the role of non-state actors in shaping processes of state building. The study explores the complex interactions between transnational crime, shadow economy activities and the emerging political structures and institutions. It is argued that the negotiations between political actors and mafias over the control of resources are central to processes of state consolidation and state crises. The specificity of mafia, as a particular type of criminal organization, consists precisely in its ability to establish strategic partnerships with political elites. The expansion of mafias in Tajikistan has been shaped by a particular set of structural conditions and contingent events that can develop alongside modern state building process. Mafia-style organizations flourished in isolated and peripheral regions. In these areas central state elites were forced to mediate with local elites and former warlords so as to gain access to economic resources and build local legitimacy. Revenues from drug trafficking were central to this "conversation", and drug mafias fulfilled the role of mediating between central and peripheral elites. Mafias' disposition to make deals with the ruling elite has represented a key factor both for peace and post-conflict stability. Thus the case of Tajikistan shows that mafias are not an anti-state entity, and that, on the contrary, under certain conditions, they can actively contribute to political order
APA, Harvard, Vancouver, ISO, and other styles
5

Malý, Jiří. "Sidlo stavební firmy." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2015. http://www.nusl.cz/ntk/nusl-227550.

Full text
Abstract:
This thesis processes project documentation for headquarters of construction company. Main purpose of building is to facilitate administrative nd manufacturing needs of the company. Building contains of reception, offices, meeting room, restrooms and lock rooms for employees, elevator and workshops. There is underground garage in the basement. Building is going to be situated in Stritez u Policky. Building takes up 1088m2 of land. Vertical structures are mainlymade of concrete and brick blocks. Horizontal structures are made of reinforced concrete panels, roof structure is made of wooden trusses.
APA, Harvard, Vancouver, ISO, and other styles
6

Gregori, Ferrer Alejandro. "Factores determinantes de la arquitectura de los "mill buildings" y su influencia en la arquitectura industrial valenciana." Doctoral thesis, Universitat Politècnica de València, 2015. http://hdl.handle.net/10251/54130.

Full text
Abstract:
[EN] The second half of the eighteenth century is characterized, among other things, because drastic changes began to occur in traditional production systems. This series of transformations were not the first, since at least two centuries before, European absolute monarchies had already implemented the actual manufacturing, which had been used as an example of renewal of the organization of craftsmen, now gathered, for the manufacture of luxury goods for self consumption. Broadly speaking, manufacturing and product development processes were generally performed in distributed locations in a dispersed way, but they became gathered in unique spaces, mainly targeted to a specific production. Working in small workshops would take place in larger spaces and with completely different characteristics. Thus, if a brief comparison between two workspaces is made, one of the second half of the eighteenth century and the other of the late nineteenth, several differences can be easily observed: the dimensions are multiplied, increasing gaps in facade, interior rooms unified in more open spaces, the way to drive it and the energy transmission throughout the interior advanced technology, etc. From the interest in this process of transformation of the production areas into new factory buildings, it is set as the starting point of this study the fact that in Britain, mainly from the aforementioned second half of the eighteenth century, there are new building materials and new building types. And this as well, in response to the demands of entrepreneurs focused on the necessity to produce in enough available spaces, housing the necessary power distribution systems for operating new machinery. All naturally well-lit, and above all, safe, avoiding the risk of fire which they were constantly subjected to. These new buildings for production are known in English as mill buildings, terminology which includes a number of specific characteristics. The main objective of this thesis is their study and analysis, based on English factories from the beginning of the so-called industrial revolution until the early twentieth century. To this end, some specific factors that shaped the form of industrial production spaces in that country will be assessed, as a result of the changing of the production model, and how this pattern was imported after a few years to the Valencia region. The determining factors of the mill buildings and their influence in the Valencian industrial architecture.
[ES] La segunda mitad del siglo XVIII se caracteriza, entre otras cosas, porque empiezan a producirse cambios drásticos en los sistemas tradicionales de producción. Esta serie de transformaciones no habían sido las primeras, puesto que al menos dos siglos antes, las monarquías absolutas europeas ya habían implantado las manufacturas reales, que habían servido como ejemplo de renovación al organizar la concentración de artesanos para la fabricación de objetos de lujo para el autoconsumo. De forma extendida hasta ese momento, la manufactura y los procesos de elaboración de productos en general se realizaban en lugares distribuidos de una forma dispersa, pero se van concentrando en espacios únicos destinados específicamente a una función productiva concreta. Los trabajos en los pequeños talleres pasarán a realizarse en espacios de mayor tamaño y con unas características totalmente diferentes. Así, si se hace una somera comparación entre dos espacios de trabajo, uno de la segunda mitad del siglo XVIII y otro de finales siglo XIX, fácilmente se aprecian varias diferencias: las dimensiones se multiplican, los huecos en fachada aumentan, los recintos interiores se unifican en espacios únicos más diáfanos, la forma de accionamiento y la transmisión de la energía por el interior avanza tecnológicamente, etc. Desde el interés por este proceso de transformación de los espacios de producción a nuevos edificios fabriles, se establece como punto de partida de este estudio, el hecho de que en Gran Bretaña, principalmente a partir de la aludida segunda mitad del siglo XVIII, aparecen nuevas técnicas constructivas y nuevos materiales que generan unos tipos edificatorios. Y ello también, como respuesta a las exigencias de los empresarios que se concretan en la necesidad de disposición de espacio suficiente para producir, albergando los sistemas necesarios de distribución de energía para el accionamiento de la nueva maquinaria. Todo ello en lugares bien iluminados de forma natural, y sobre todo seguros, evitando el riesgo de incendio al que constantemente estaban sometidos. Estos nuevos edificios para la producción se conocen en inglés como "mill buildings", terminología que incluye una serie de características concretas. El objetivo fundamental de esta tesis es su estudio y análisis, tomando como base las fábricas inglesas desde el origen de la conocida como revolución industrial hasta principios del siglo XX. Para ello, se evaluarán unos factores concretos que configuraron la forma de los espacios de producción industrial en aquel país, como consecuencia del cambio de modelo productivo, y cómo este patrón se importó al cabo de unos años a la Comunidad Valenciana.
[CAT] La segona meitat del segle XVIII es caracteritza, entre altres coses, perquè comencen a produir-se canvis dràstics en els sistemes tradicionals de producció. Esta sèrie de transformacions no havien segut les primeres, ja que al menys dos segles abans, les monarquies absolutes europees ja havien implantat les manufactures reials, que havien servit com a exemple de renovació a l'organitzar la concentració d'artesans per a la fabricació d'objectes de luxe per a l'autoconsum. De forma estesa fins eixe moment, la manufactura i els processos d'elaboració de productes en general es realitzaven en llocs distribuïts d'una forma dispersa, però es van concentrant en espais únics destinats específicament a una funció productiva concreta. Els treballs als xicotets tallers passaran a realitzar-se en espais de major grandària i amb unes característiques diferents. Així, si es fa una succinta comparació entre dos espais de treball, u de la segona meitat del segle XVIII i altre de finals del segle XIX, fàcilment s'aprecien vàries diferències: les dimensions es multipliquen, els buits de façana augmenten, els recintes interiors s'unifiquen en espais únics més diàfans, la forma d'accionament i la transmissió de l'energia per l'interior avança tecnològicament, etc. Des de l'interès per este procés de transformació dels espais de producció a nous edificis fabrils, s'estableix com a punt de partida d'este estudi, el fet de què a la Gran Bretanya, principalment a partir de l'al.ludida segona meitat del segle XVIII, apareixen noves tècniques constructives i nous materials que generen uns tipus edificatoris. I açò també, com a resposta a les exigències dels empresaris que es concreten en la necessitat de disposició d'espai suficient per a produir, albergant els sistemes necessaris de distribució d'energia per a l'accionament de la nova maquinària. Tot això en llocs ben il.luminants de forma natural, i sobre tot segurs, evitant el risc d'incendi al que constantment estaven sotmesos. Estos nous edificis per a la producció es coneixen en anglès com a "mill buildings", terminologia que inclou una sèrie de característiques concretes. L'objectiu fonamental d'esta tesi és el seu estudi i anàlisi prenent com a base les fàbriques angleses des de l'origen de la coneguda com a revolució industrial fins principis del segle XX. Per això, s'avaluaran uns factors concrets que varen configurar la forma dels espais de producció industrial en aquell país, com a conseqüència del canvi de model productiu, i com eixe patró es va importar passats uns anys a la Comunitat Valenciana.
Gregori Ferrer, A. (2015). Factores determinantes de la arquitectura de los "mill buildings" y su influencia en la arquitectura industrial valenciana [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/54130
TESIS
APA, Harvard, Vancouver, ISO, and other styles
7

Zucchetti, Lais. "Influência das características do peitoril no molhamento dos parâmetros próximos às janelas frente à chuva dirigida." reponame:Biblioteca Digital de Teses e Dissertações da UFRGS, 2016. http://hdl.handle.net/10183/156782.

Full text
Abstract:
A umidade é um dos principais agentes causadores de manifestações patológicas no ambiente construído, e, a chuva dirigida, é uma das principais fontes de umidade que afetam a durabilidade das fachadas das edificações. Desta forma, métodos vêm sendo desenvolvidos como forma de avaliação, entre eles se encontram os experimentais que buscam avaliar este fenômeno a partir da realização de ensaios. A pesquisa é motivada pela constatação da quase inexistência de estudos experimentais de quantificação de chuva dirigida, bem como pela identificação da problemática relacionada ao manchamento e infiltração de água na área próxima às janelas. Sendo assim, o objetivo principal desta pesquisa é identificar, com base em testes de chuva dirigida, a influência das características de projeção, com variações de 50 mm e 120 mm, de inclinação, com valores de 6% e 20%, e engaste lateral do peitoril, sem engaste e com engates de 100 mm, no molhamento da área de fachada localizada próxima às janelas. Este trabalho foi desenvolvido a partir da avaliação de nove modelos com dimensões 1,20m x 2,40m, sendo um modelo de referência sem peitoril, e outros oito englobando as diferentes configurações de projeção, inclinação e engastes laterais dos peitoris, em granito. As técnicas empregadas nas avaliações dos modelos foram a coleta de água da chuva nos paramentos dos modelos, registros de imagens termográficas por infravermelho, chuva colorida para identificação dos fluxos e registros fotográficos digitais A chuva simulada apresentava vazão total de 6 l/m, com diâmetros de gota que variavam de 0,86 mm – 1,45 mm com interceptação de velocidade de vento de 3,2 m/s, e, os testes foram desenvolvidos em quatro ciclos de 15 minutos de duração cada. Os resultados demonstraram que a utilização de prolongamentos laterais nos peitoris promoveram melhor desempenho dos modelos com relação ao descolamento da água da chuva das paredes, quando em comparação àqueles que não possuem esta configuração. Considerando a inclinação dos peitoris identificou-se que o valor de 6% permite, mesmo com a existência de um lacrimal na face inferior do peitoril, a percolação da água da chuva pela porção inferior deste elemento, com um gotejamento vertical. Nas configurações com 20% de inclinação do peitoril não se verifica este comportamento, contudo, o gotejamento ocorre no sentido da parede do modelo, direcionando parte do fluxo da chuva para a área localizada abaixo do peitoril, condicionando valores mais elevados de coleta de chuva. A projeção de 50 mm protege de forma menos eficiente as paredes dos modelos do molhamento pela chuva dirigida, gerando áreas protegidas menores e maiores valores de água coletada quando comparadas à projeção de 120 mm.
Moisture is one of the leading causes of pathological manifestations in buildings. Wind driven rain, is one of the main sources that affect the buildings facades durability. Thus, with the mean to evaluate this phenomenon, some experimental methods has been evaluated. The inexistence of experimental studies for wind driven rain quantification, motivated this research. Besides, this research aims to identify the staining and water seepage in the windows area problems. Thus, the main objective of this research is to identify, based on wind driven rain tests, the influence of geometrical characteristics of sills, in the wetness area located near windows. For this, there were developed sills with projection variations of 50 mm and 120 mm, inclinations of 6 % and 20 %, and sill without side extensions of window and 100 mm extensions. The experimental program contemplate the evaluation of nine wall models, with dimensions 1.20 m x 2.40 m, where a window were fixed and granite sills were installed, with the geometrical variations proposed. Simulated driving rain had total flow 6 l/m, with drop diameters ranging from 0.86 mm - 1.45 mm, with wind speed intercept of 3.2 m /s, and the tests were carried out in four cycles of 15 minutes each. There were collected rainwater on some controlled points of the walls models, besides infrared thermography images, colorful rain for identification of flows and digital photography. With the final results it was possible to conclude that the use of lateral extensions in windows sills promote better performance in the models, in relation to detachment of rainwater to the walls, when compared to sills without lateral extension. About sills inclination, it was found that the 6 % value results in a better behavior compared with 20% inclination. Finally, the windows sills with 120 mm protects more efficiently the models walls.
APA, Harvard, Vancouver, ISO, and other styles
8

Rivas, King Nelly [Verfasser], Jens [Akademischer Betreuer] Beckmann, and Vladimir [Akademischer Betreuer] Azov. "Functionalized Silyl-BINOLs and their Use as Building Blocks for the Synthesis of Chiral Sila-Macrocycles / Nelly Rivas King. Gutachter: Jens Beckmann ; Vladimir Azov. Betreuer: Jens Beckmann." Bremen : Staats- und Universitätsbibliothek Bremen, 2012. http://d-nb.info/1071993550/34.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Xu, Yan. "War Heroes: Constructing the Soldier and the State in Modern China, 1924-1945." The Ohio State University, 2013. http://rave.ohiolink.edu/etdc/view?acc_num=osu1357130680.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Serfass, David. "Le gouvernement collaborateur de Wang Jingwei : aspects de l’État d’occupation durant la guerre sino-japonaise, 1940-1945." Thesis, Paris, EHESS, 2017. http://www.theses.fr/2017EHES0133/document.

Full text
Abstract:
Cette thèse se propose d’étudier le gouvernement collaborateur dirigé par Wang Jingwei (1940-1945) à la croisée de deux trajectoires : celle de l’État chinois moderne et celle de l’Empire japonais. Au-delà d’un approfondissement des connaissances sur l’occupation japonaise en Chine, mon travail ambitionne d’enrichir le champ des études sur l’État lui-même. Une telle approche ne va pas de soi, tant le caractère « fantoche » attribué à ce régime par l’historiographie chinoise l’a longtemps isolé du reste de la période et cantonné à une histoire des tenants idéologiques de la collaboration. Sans évacuer cet aspect, mon approche consiste à l’inscrire dans une étude politique et sociale du gouvernement et de l'administration, afin de saisir le fonctionnement réel de la machine étatique en zone occupée. Pour ce faire, je développe le concept d’État d’occupation, qui désigne l’ensemble formé par les organisations japonaises (institutions militaires et civiles) et chinoises (gouvernements collaborateurs locaux), établies afin d’administrer la Chine occupée. La construction de cet État, qui visa, à partir de 1940, à intégrer ces organisations derrière la façade du gouvernement de Wang Jingwei, fut détournée par des logiques de formation, nées des contradictions entre ses différents acteurs. Ce processus est examiné en adoptant des focales différentes. La première partie étudie la mise en place de l’État d’occupation du point de vue japonais, en montrant l’impact qu’eurent, l’un sur l’autre, centre et périphérie au sein de l’Empire nippon. Je reviens ensuite sur la genèse de cet État d’occupation, jusqu’à la formation du gouvernement de Wang Jingwei. La deuxième partie réduit la focale pour s’intéresser à l’organisation particulière de ce dernier, dont la spécificité, par rapport aux autres régimes collaborateurs, provenait de l’ambition qu’avait le groupe de Wang de restaurer le Gouvernement nationaliste légitime dans le cadre d’un « retour à la capitale ». La troisième partie, enfin, se penche sur le cas de la fonction publique en zone occupée, dont le cadre institutionnel et idéologique est mis en regard avec les conditions de vie des agents
This dissertation studies the collaboration government headed by Wang Jingwei (1940-1945) at the crossroads of two trajectories: those of China’s modern state and Japan’s Empire. More broadly, my work aims at enriching the field of state-building research. Such an approach may seem counter-intuitive, as this regime is still labelled a "puppet" by Chinese historiography, which has cast it aside from the rest of the period and confined it to an ideological history of collaboration. I consider it within the context of a political and social study of government and administration, which tries to grasp the real functioning of the state machine in the occupied zone. For this purpose, I develop the concept of occupation state, i.e. a larger apparatus than the sole collaboration regimes, which included Japanese military and civilian agencies as well as Chinese local governments. From 1940 on, the state-building process aimed at integrating these organizations behind the façade of the Wang Jingwei government. However, it was diverted by a formation process, which resulted from the contradictions between its different actors. I explore this process from three different angles. The first part studies the establishment of the occupation state from the Japanese point of view, showing the mutual impact of centre and periphery within the Japanese Empire. Then, it follows the genesis of the occupation state up to the establishment of the Wang Jingwei government. The second part focuses on the experience of the latter, whose specificity, compared to other pro-Japanese regimes, was the ambition of the Wang group to restore the legitimate nationalist government as part of a "return to the capital". Thirdly, I look at the administrative personnel’s institutional and ideological framework as well as their living conditions
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Silo building"

1

(Spain), Instituto Geográfico Nacional. Planos de iglesias, edificios públicos y parcelarios urbanos de la Provincia de Madrid en el último tercio del siglo XIX. Madrid: MOPU, Instituto Geográfico Nacional, 1988.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Arquitectura virreinal de Lima en la primera mitad del siglo XVII. Lima: Universidad Nacional de Ingeniería : INI-FAUA Instituto de Investigación, Facultad de Arquitectura, Urbanismo y Artes, 2003.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Brito, Lilia Martín. El desarrollo urbano de Cienfuegos en el siglo 19. Oviedo: Universidad de Oviedo, Servicio de Publicaciones, 1998.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Waisberg, Myriam. Arquitectura religiosa de Valparaiso: Siglo XVI-siglo XIX. Santiago: Fondo Nacional de Desarrollo Científico y Técnico, 1992.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

La ciudad construida: Control municipal y reglamentación edificatoria en la Granada del siglo XIX. [Granada]: Diputación Provincial de Granada, 1997.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

López, Celia Maldonado. La Ciudad de México en el siglo XVII. México: Departamento del Distrito Federal, Secretaría General de Desarrollo Social, Comité Interno de Ediciones Gubernamentales, 1988.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Vega, Ramón Guerra de la. Guía de Madrid: Siglo XIX. [Madrid?]: Guerra de la Vega, 1993.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Rodríguez, Eduardo Luis. La Habana, arquitectura del siglo XX. Barcelona: Blume, 1998.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Bruno, Geffroy Aguilar, ed. Un siglo de arquitectura en Ensenada. Mexicali: Fondo Editorial de Baja California, 2001.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Patrimonio arquitectónico del Valle del Aburrá: Final del siglo XIX y principio del siglo XX. Medellín, Colombia: Instituto Tecnológico Metropolitano, 2008.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Silo building"

1

Rodríguez, Luis, and Teodoro Sánchez. "Silt basin." In Designing and Building Mini and Micro Hydro Power Schemes, 85–96. Rugby, Warwickshire, United Kingdom: Practical Action Publishing, 2011. http://dx.doi.org/10.3362/9781780440552.006.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Tsim, Siu-tai, Sherry Yue Su, Bonny Bun-ho Yuen, and Mandy Liyan Xie. "Comparison of Building Environment Assessment Systems Across the Belt and Road Countries: How Do Green Buildings Contribute to Achieving Ecological Civilization and Sustainable Development Goals?" In Silk Road to Belt Road, 235–58. Singapore: Springer Singapore, 2018. http://dx.doi.org/10.1007/978-981-13-2998-2_14.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Jiang, Yang. "The New Silk Road for China and Japan: Building on Shared Legacies." In Rethinking the Silk Road, 131–46. Singapore: Springer Singapore, 2017. http://dx.doi.org/10.1007/978-981-10-5915-5_8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Wittner, David G. "The Mechanization of Japan’s Silk Industry and the Quest for Progress and Civilization, 1870–1880." In Building a Modern Japan, 135–59. New York: Palgrave Macmillan US, 2005. http://dx.doi.org/10.1057/9781403981110_7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Nakkula, Michael J., Karen C. Foster, Marc Mannes, and Shenita Bolstrom. "Partnering with Prevention: The Lawton/Fort Sill, Oklahoma, Community Coalition." In Building Healthy Communities for Positive Youth Development, 121–37. Boston, MA: Springer US, 2010. http://dx.doi.org/10.1007/978-1-4419-5744-3_8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Butera, Federico. "The Sino-Italian Environment & Energy Building (SIEEB): A Model for a New Generation of Sustainable Buildings." In Sustainable Development and Environmental Management, 279–84. Dordrecht: Springer Netherlands, 2008. http://dx.doi.org/10.1007/978-1-4020-6598-9_20.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Butera, Federico. "The Sino-Italian Environment & Energy Building (SIEEB): A Model for a New Generation of Sustainable Buildings." In Sustainable Development and Environmental Management, 279–84. Dordrecht: Springer Netherlands, 2008. http://dx.doi.org/10.1007/978-1-4020-8229-0_20.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Liu, Peng. "Building of Cooperative Regime for 21st-Century Maritime Silk Road." In Annual Report on the Development of the Indian Ocean Region (2015), 151–73. Singapore: Springer Singapore, 2015. http://dx.doi.org/10.1007/978-981-10-0167-3_8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Chaudhari, Abhishek D., Pravin D. Dhake, Sudhanshu Pathak, and Vaishnavi Battul. "Seismic Appraisement of Building with Silt Floor Using Composite Column." In Lecture Notes in Civil Engineering, 127–39. Singapore: Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-15-9162-4_11.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Yokell, Matthew A. "Investing in “German Hong Kong”: The Building of a Global Economic Presence in Qingdao, 1898–1914." In Sino-German Encounters and Entanglements, 77–105. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-73391-9_4.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Silo building"

1

Wieckowski, Zdzislław. "Numerical Modeling of Silo Discharge." In Eighth International Conference on Computing in Civil and Building Engineering (ICCCBE-VIII). Reston, VA: American Society of Civil Engineers, 2000. http://dx.doi.org/10.1061/40513(279)100.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Fathalizadeh, Ali, Parviz Ghoddousi, Ali Akbar Shirzadi Javid, M. Reza Hosseini, and Arka Ghosh. "Integrating sustainability into construction project management: Barriers in developing countries." In The 13th international scientific conference “Modern Building Materials, Structures and Techniques”. Vilnius Gediminas Technical University, 2019. http://dx.doi.org/10.3846/mbmst.2019.122.

Full text
Abstract:
This paper is an attempt to explore the barriers to integrating sustainability into construction project management in developing countries. To this end, a comprehensive review of the literature is conducted, as a result of which a list of 30 barriers is culled from existing studies. The list of barriers is subsequently assessed in terms of relative importance index (RII) through a survey questionnaire administered to Iranian construction industry experts, resulting in a dataset of 176 completed questionnaires. Findings bring to light the most influential barriers to incorporating sustainability in construction projects for a developing country. These were: (1) lack of understanding of the potential selfbenefits of proactivity and high economic risks that unsustainable practices may carry, (2) inadequate assessment of risks and a silo-based approach, namely, insufficient cooperation among practitioners, research institutions and environmental organisations and (3) the lack of a systematic approach to planning and acting for the fulfilment of sustainability goals. As one of the first studies in its kind, the paper offers invaluable insight for researchers, practitioners, and policy makers, in supporting the transition of construction project management practices towards fulfilling sustainable development goals.
APA, Harvard, Vancouver, ISO, and other styles
3

Kim, Min-Seok, Myung-Sub Chung, and Kyu-Wan Park. "The Status of LILW Disposal Facility Construction in Korea." In ASME 2013 15th International Conference on Environmental Remediation and Radioactive Waste Management. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/icem2013-96188.

Full text
Abstract:
In this paper, we discuss the experiences during the construction of the first LILW disposal facility in South Korea. In December 2005, the South Korean Government designated Gyeongju-city as a host city of Low- and Intermediate-Level Radioactive Waste (LILW) disposal site through local referendums held in regions whose local governments had applied to host disposal facility in accordance with the site selection procedures. The LILW disposal facility is being constructed in Bongilri, Yangbuk-myeon, Gyeongju. The official name of the disposal facility is called ‘Wolsong Low and Intermediate Level Radioactive Waste Disposal Center (LILW Disposal Center)’. It can dispose of 800,000 drums of radioactive wastes in a site of 2,100,000 square meters. At the first stage, LILW repository of underground silo type with disposal capacity of 100,000 drums is under construction expected to be completed by June of 2014. The Wolsong Low and Intermediate Level Radioactive Waste Disposal Center consists of surface facilities and underground facilities. The surface facilities include a reception and inspection facility, an interim storage facility, a radioactive waste treatment building, and supporting facilities such as main control center, equipment & maintenance shop. The underground facilities consist of a construction tunnel for transport of construction equipment and materials, an operation tunnel for transport of radioactive waste, an entrance shaft for workers, and six silos for final disposal of radioactive waste. As of Dec. 2012, the overall project progress rate is 93.8%.
APA, Harvard, Vancouver, ISO, and other styles
4

Gullbrekken, Lars, and Steinar Grynning. "Rain-tightness of door sill sealing." In 7th International Building Physics Conference. Syracuse, New York: International Association of Building Physics (IABP), 2018. http://dx.doi.org/10.14305/ibpc.2018.be-2.05.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Azzouz, M. Salim, Abhishek Chatterjee, Robert Rorabaugh, Christopher Venegas, Krista Duke, John Mark Weller, and Chris Smith. "Active Road Rumble Energy Harvesting Panels." In ASME 2013 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/imece2013-64483.

Full text
Abstract:
Vehicles traveling through busy roads and highways waste a huge portion of their kinetic energy. Up to five percent of the car’s energy is lost due to braking. In an effort to save energy it is possible to harvest some of this lost energy through a mechanical device built into the road. With over 1 billion cars, there is a huge potential for a man made untapped energy to be collected and harvested. This presentation focuses on designing a mechanical system that collects the energy of cars passing over a depressible flapping road rumble panel. As the car passes over the flap, the panel depresses and turns a directional shaft. The energy of many panels is collected and is summed up in a continuously turning flywheel. The collected mechanical energy can then be converted into electrical energy. The panels would be located where car drivers encounter deceleration ramps, when approaching a stop sign or entering a toll plaza. The analysis of this active road rumbles concept involved 1) designing a prototype using a computer drawing software such as SolidWorks, then 2) modeling the system mathematically to figure out all the important and intervening parameters factoring in the expression of the equation of motion of such systems, and then finally 3) building a physical prototype to analyzes the performances of such systems. The SolidWorks drawings for the model have been created. The dynamical model used free body diagrams and Newton’s second laws to determine the different loads and the equation of motion of the road rumble system. The mathematical model took into consideration the parameters of a shock absorber with a spring/mass/damper system. The kinematic equations of the shaft and flywheels were used to determine the speed and acceleration of the power train. A physical prototype was tested manually for time and frequency responses. It has been found that the energy collecting flywheel is lightly damped and loses a small part of its energy to friction. A feasibility study was conducted to evaluate the economic viability of such system. The harvested energy was estimated by measuring the RPM of the flywheel, and it was found that such system have an acceptable return on the investment. It is envisioned that such harvesting energy systems can be used in many ways one of them is to empty a huge offshore silo tank filled with sea water and producing peak electrical energy by allowing the sea water back into the silo through a hydraulic turbine.
APA, Harvard, Vancouver, ISO, and other styles
6

Johnson, Julie, and Samantha Doonan. "Risk and Protective Factors Associated with Cannabis Use in Massachusetts Youth." In 2020 Virtual Scientific Meeting of the Research Society on Marijuana. Research Society on Marijuana, 2021. http://dx.doi.org/10.26828/cannabis.2021.01.000.2.

Full text
Abstract:
Cannabis policies are continuously evolving, over half of U.S. youth now live in a state with a form of legalized cannabis. Monitoring risk and protective factors is critical to ensure evidence-based youth prevention in this post cannabis-prohibition era. Massachusetts has enacted and implemented three forms of legalization: (1) Decriminalization (2008), (2) medical cannabis (2012), and (3) adult-use cannabis (2016). This study used state Youth Risk Behavior Survey (YRBS) data of participants in grades 9-12 from 2007-2017 (N=17,691). Logistical regression models were run to assess effects of varying cannabis policy and risk or protective behaviors on cannabis use outcomes: (1) Lifetime use; (2) Past 30-day; and (3) Past 30-day heavy use. The enactment of cannabis policies was not associated with greater odds of youth reporting Lifetime and Past 30-day cannabis use behaviors. Any adult-support [heavy use OR=0.43 (95% CI=0.37,0.50), p<.001], better grades [heavy use OR=0.25 (95% CI=0.21,0.29), p<.001], and being heterosexual [heavy use OR=0.42 (95% CI=0.34,0.51), p<.001] were associated with lower odds of all cannabis use outcomes. Multiple risk factors broadly categorized under: risky sexual behaviors, non-heterosexual orientation, weapon carrying/exposure, hopelessness and suicidality behaviors, driving behaviors, and disability were associated with greater odds of cannabis use. Sensitivity analyses showed only one risk behavior was moderate by cannabis policy enactment. Results suggest that cannabis prevention efforts should not occur in a silo, rather evidence-based models for reducing risky behaviors generally may have the largest impact. Building and supporting relationships with trusted adults for youth at higher risk should be emphasized.
APA, Harvard, Vancouver, ISO, and other styles
7

Jacobus, Frank, and Marc Manack. "Remote Control: The Natural Language of Architecture." In 2018 ACSA International Conference. ACSA Press, 2018. http://dx.doi.org/10.35483/acsa.intl.2018.30.

Full text
Abstract:
The architectural design process is a means of translating information into form, and has long relied on indirect (“remote”) control mechanisms for communicating and translating the architect’s authorial intent into a built work. These methods have generally evolved from a more direct, physical basis, as both technology and the discipline have evolved. To communicate design ideas, architects have relied on methodologies that range from an extreme desire for control, to models that attempt to relinquish many controls entirely. Early communication models, in part due to lack of material, form, and program diversity, allowed for a less systematic and complex descriptive method; inscriptions in the earth, physical detail models along with a set of instructions, or simple scale models of the intention were all that was required.2 As cultures and their technologies advanced, communication methods such as scaled orthographic drawings, specifications and other forms of written instructions, and now fully realized Building Information Models, have become normative practice in a profession that looks for total control of the built work before it is physically realized. Apart from the communicative control models mentioned above, there are authorial models which have also progressed in complexity and abstraction alongside societal advancements. In the discipline’s infancy, authorship involved subtle evolutions of proportion and order within a well-established typological system. In modernism, the authorial models evolved as architects experimented with increased typological invention in response to a radically changing technological and social environment. Advancing to the contemporary “digital” moment, architects continue to develop systems to control complexities within the work, mapping strategies that deal with collecting and spatializing data, while others see contemporary design tools as a means to relinquish some design control to outside forces whose unexpected potential is compelling. This paper gives examples of remote communicative and authorial controls, and posits a new theory of the potential meaningful effects of leveraging these control mechanisms in new ways using three projects by SILO AR+D.
APA, Harvard, Vancouver, ISO, and other styles
8

Dang, Rui, Huijiao Tan, Gang Liu, and Nan Wang. "Influence of Illumination on Paper and Silk used in Chinese Traditional Painting and Calligraphy Based on Raman Spectroscopy in Museum." In 7th International Building Physics Conference. Syracuse, New York: International Association of Building Physics (IABP), 2018. http://dx.doi.org/10.14305/ibpc.2018.ie-1.04.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Li, Yonghong, Lin Fu, and Chen Jie. "Case Study for Integrated Regional Energy Planning in Sino-Singapore Tianjin Eco-City." In ASME 2009 3rd International Conference on Energy Sustainability collocated with the Heat Transfer and InterPACK09 Conferences. ASMEDC, 2009. http://dx.doi.org/10.1115/es2009-90177.

Full text
Abstract:
Regional integrated energy plan is considered for urban energy infrastructure utilization. Heating mode such as heating technology of central heating by waste heat recovery in power plant, geothermal heat, sewage water heat pump, ground source heat pump will be developed in Tianjin Eco-city. Electricity supplying mode such as urban power distribution network, solar power generation system, wind power generation system, biogas CHP and natural gas fired BCHP will be developed in eco-city. A medium pressure natural gas network will be developed with two gas pressure-regulating station in north and southern part of eco-city. Low energy consumption buildings have a low heating and air-conditioning energy consumption and electricity consumption. Based on the building energy simulation analysis, we put forward the indicator system of energy planning closely focus on the suitable energy demand. In this paper, the integrated energy planning with space and time characteristics is also presented and analyzed briefly.
APA, Harvard, Vancouver, ISO, and other styles
10

Fontana, Maria Pia, and Miguel Mayorga. "Le Corbusier. Arquitectura urbana: Millowners Association Building y Carpenter Center." In LC2015 - Le Corbusier, 50 years later. Valencia: Universitat Politècnica València, 2015. http://dx.doi.org/10.4995/lc2015.2015.972.

Full text
Abstract:
Resumen: La obra de Le Corbusier es una amplia exploración de soluciones urbanas y arquitectónicas que plantean relaciones de continuidad entre edificio y ciudad, arquitectura y entorno, espacio interior y espacio exterior: rampas, cuerpos bajos, entrantes y salientes, plantas libres y fachadas con espesor, son algunos de los elementos de integración y/o de mediación utilizados por el maestro suizo. El Millowners Association Building de 1954 ubicado en la ciudad de Almedabad en la India, y el Carpenter Center for Visual Arts de la Graduate School of Design of Harvard de 1961-1964 en la ciudad de Cambridge, en Estados Unidos, son dos edificios que presentan rasgos característicos en común: una volumetría básica, uso del hormigón armado visto, uso de similares elementos de fachada y una rampa que sobresale del edificio y que confiere a ambos un carácter reconocible y peculiar. Los dos edificios ya han sido puestos en relación por diferentes críticos como Giedion 1967, o Frampton 1975, e incluso se ha considerado uno como antecedente del otro. Sin embargo, un análisis comparativo permite verificar que aunque la rampa es el elemento común más evidente, éste juega un papel muy diferente en la definición de las relaciones urbanas de cada uno de los edificios con su entorno inmediato y con la ciudad. Y además que también, en la relación del edificio con la ciudad entran en juego otros elementos y soluciones arquitectónicas, que de manera solidaria, son determinantes definidores de su relación con el entorno y su carácter urbano. Abstract: The work of Le Corbusier is a comprehensive exploration of urban and architectural solutions which show continuity relationships between city and building, architecture and environment, interior and exterior space throughout elements of integration and / or mediation used by the Swiss master like ramps, lower volumes, incoming and outgoing, open floor plans and thick facades. The Association Millowners Building (1954) located in the city of Almedabad in India, and the Carpenter Center for Visual Arts at the Graduate School of Design of Harvard (1961 to 1964) located in the city of Cambridge, in the United States, are two buildings that have some characteristics in common, like a basic volume, use of reinforced concrete, using similar facade elements and a projected ramp gives a recognizable and distinctive character of both buildings. Different authors compared the two buildings as Giedion 1967 or 1975 Frampton, and have stated that one has been based on the other. However, a comparative analysis verifies that although the ramp is the most obvious common element, it plays a very different role in the definition of urban relationships of each of the buildings with their immediate environment and the city. Moreover other elements configure crucial aspects in the relationship between the buildings and the urban space creating architectural solutions and interesting relations that are crucial for the definition of the relationship with the environment and the urban character of every building. Palabras clave: Le Corbusier, Millowners Association Building, Carpenter Center for Visual Arts, Urban Architecture. Keywords: Le Corbusier, Millowners Association Building, Carpenter Center for Visual Arts, Arquitectura Urbana. DOI: http://dx.doi.org/10.4995/LC2015.2015.972
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Silo building"

1

G. Wagenblast. Preliminary Dynamic Siol-Structure-Interaction Analysis for the Waste Handling Building. Office of Scientific and Technical Information (OSTI), May 2000. http://dx.doi.org/10.2172/837085.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

SIDHU, WAHEGURU PAL SINGH, JING-DONG YUAN, and KENT L. BIRINGER. Cooperative Monitoring Center Occasional Paper/13: Cooperative monitoring for confidence building: A case study of the Sino-Indian border areas. Office of Scientific and Technical Information (OSTI), August 1999. http://dx.doi.org/10.2172/752010.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Silo building' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography