Relevant bibliographies by topics / Simulation based product development

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Simulation based product development'

Author: Grafiati
Published: 4 June 2021
Last updated: 7 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Simulation based product development.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Simulation based product development"

1

Chen, Yan Hai, Hai Feng Li, Fu Shang Qiu, Jing Xu, and Zi Tong Feng. "Study on the Product Development Process Based on WITNESS Simulation." Applied Mechanics and Materials 577 (July 2014): 1292–95. http://dx.doi.org/10.4028/www.scientific.net/amm.577.1292.

Full text
Abstract:
The differences of development cycle between product serial and concurrent development process are obtained through simulation in this paper, which implies the importance of rational planning in the process of product development. The models of product serial and concurrent development process are built based on witness. Three types of models for both simple and complex products have been made respectively to simulate ,and then compared results have been got under six different conditions . Among six situations, the results of four are that the time of concurrent process is much shorter than t
APA, Harvard, Vancouver, ISO, and other styles
2

GUO, Feng. "Logical iteration structure model based product development process simulation." Chinese Journal of Mechanical Engineering 43, no. 03 (2007): 72. http://dx.doi.org/10.3901/jme.2007.03.072.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Ma, Cheng, Tian Yuan Xiao, Wen Hui Fan, Hong Bo Sun, and Ying Chao Yue. "Two Novel Adams Model Encapsulation Methods in HLA Based Collaborative Product Development." Applied Mechanics and Materials 130-134 (October 2011): 1085–91. http://dx.doi.org/10.4028/www.scientific.net/amm.130-134.1085.

Full text
Abstract:
As a well-known standard of distributed simulation, High Level Architecture (HLA) has adopted as basic framework in most distributed interactive simulation (DIS) systems. At the same time, DIS always involves multiple disciplinary simulation models which are supported by different software. And these software are not always compatible with HLA. For example, though widely used in mechanical kinetics and kinematics simulations, ADAMS, a multi-body kinetics simulation software cannot directly support HLA. To address this issue, this paper analyses redevelopment of legacy systems and models (such
APA, Harvard, Vancouver, ISO, and other styles
4

Vikas, Basankar, Dr S. P. Metkar, Manoj Mane, and Bhuvaneshwar Kanade. "Integration of Application Code Simulations for Data exchange." Journal of University of Shanghai for Science and Technology 23, no. 07 (2021): 659–66. http://dx.doi.org/10.51201/jusst/21/07189.

Full text
Abstract:
In every product development industry, automation plays a key role in increasing the throughput of the company and providing better planning in product development and improved product quality. It is very necessary to find a solution to interdependencies during the product development process. During simulation-based analysis of a product, it is required that the need for actual hardware of the product is to be eliminated. Because of this, the functionality of the actual hardware can be analyzed by using software using simulations. If simulations of different products are running, the data is
APA, Harvard, Vancouver, ISO, and other styles
5

Zhang, Xiaodong, Shuo Zhang, Yingzi Li, and Christopher Schlick. "Task scheduling behaviour in agent-based product development process simulation." International Journal of Computer Integrated Manufacturing 25, no. 10 (2012): 914–23. http://dx.doi.org/10.1080/0951192x.2011.596223.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Yao, Tian Chang, Hai Tao Wu, Hong Bin Liu, Da Wei Xu, and Jia Cheng Cai. "The Simulation of Stack-Manipulator to Aluminum-Ingot Based on ADAMS." Applied Mechanics and Materials 541-542 (March 2014): 704–7. http://dx.doi.org/10.4028/www.scientific.net/amm.541-542.704.

Full text
Abstract:
The authors build the three-dimensional model of stack-manipulator to aluminum-ingot in SoildWorks,and then import the model into Adams to create a simulation model via the interface between them.Adams runs dynamic and kinematics simulation of the model to measure some kinematic data of manipulator and the contact force of gear part.The dynamic simulations have forecasted the performance of products based on the model well and show the importance of Adams in product development.
APA, Harvard, Vancouver, ISO, and other styles
7

Zhang, Shuo, Yingzi Li, and Xiaodong Zhang. "Agent Behavior-Based Simulation Study on Mass Collaborative Product Development Process." Mathematical Problems in Engineering 2015 (2015): 1–10. http://dx.doi.org/10.1155/2015/689383.

Full text
Abstract:
Mass collaborative product development (MCPD) benefits people by high innovation products with lower cost and shorter lead time due to quick development of group innovation, Internet-based customization, and prototype manufacturing. Simulation is an effective way to study the evolution process and therefore to guarantee the success of MCPD. In this paper, an agent behavior-based simulation approach of MCPD is developed, which models the MCPD process as the interactive process of design agents and the environment objects based on Complex Adaptive System (CAS) theory. Next, the structure model o
APA, Harvard, Vancouver, ISO, and other styles
8

Zhang, Wan Gong, Hai Tao Wu, and Hong Bin Liu. "Dynamic Simulations of Rehabilitation Move-Assistant Device Based on Adams." Advanced Materials Research 476-478 (February 2012): 1228–31. http://dx.doi.org/10.4028/www.scientific.net/amr.476-478.1228.

Full text
Abstract:
The authors established a rehabilitation move-assistant device in SolidWorks, and then imported the model into Adams to create a simulation model via the interface between them. Adams run dynamic simulations of the model under different load outputting torque applied to the model when it was moving at uniform speed. The dynamic simulations have forecasted the performance of products based on the model well and shown the importance of Adams in product development.
APA, Harvard, Vancouver, ISO, and other styles
9

Li Yingzi, Zhang Shuo, Zhang Xiaodong, and Wang Aiping. "Agent-based Partner Selection and Simulation in Collaborative Product Development Process." INTERNATIONAL JOURNAL ON Advances in Information Sciences and Service Sciences 4, no. 20 (2012): 595–604. http://dx.doi.org/10.4156/aiss.vol4.issue20.71.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Shtub, Avraham. "New Product Development—Experience from Distance Learning and Simulation-Based Training." Creative Education 07, no. 01 (2016): 105–13. http://dx.doi.org/10.4236/ce.2016.71011.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Simulation based product development"

1

Bergström, Frida, and Marika Björkvall. "Simulation based product development and competitiveness : How does a simulation based product development affect a company’s overall future competitiveness?" Thesis, Linköpings universitet, Institutionen för ekonomisk och industriell utveckling, 2015. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-119830.

Full text
Abstract:
The gradually increasing competition that occurs in mature markets, pushes the companies to consider new ways of competing. The more mature the market becomes the higher level of competitive fulfillment and edge is needed. E.g. for Scania the dimension high quality was until now considered a competitive advantage, but is currently evolving towards a dimension that is necessary to fulfill to even act within the market. Thus, companies such as Scania have to push their limits everywhere possible across their organization. One way to push the limits of R&D and product development (PD) is, bas
APA, Harvard, Vancouver, ISO, and other styles
2

Braun, Robert. "Distributed System Simulation Methods : For Model-Based Product Development." Doctoral thesis, Linköpings universitet, Fluida och mekatroniska system, 2015. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-122754.

Full text
Abstract:
Distributed system simulation can increase performance, re-usability and modularity in model-based product development. This thesis investigates four aspects of distributed simulation: multi-threaded simulations, simulation tool coupling, distributed equation solvers and parallel optimization algorithms. Multi-threaded simulation makes it possible to split up the workload over several processing units. This reduces simulation time, which can save both time and money during the product development cycle. The transmission line element method (TLM) is used to decouple models to independent sub-mo
APA, Harvard, Vancouver, ISO, and other styles
3

Wynn, David Charles. "Model-based approaches to support process improvement in complex product development." Thesis, University of Cambridge, 2007. https://www.repository.cam.ac.uk/handle/1810/237006.

Full text
Abstract:
The performance of product development processes is important to the commercial success of new products. The improvement of these processes is thus a strategic imperative for many engineering companies - the aero-engine is one example of a complex product for which market pressures necessitate ever-shorter development times. This thesis argues that process modelling and simulation can support the improvement of complex product development processes. A literature review identified that design process modelling is a well-establishedresearch area encompassing a diverse range of approaches. Howeve
APA, Harvard, Vancouver, ISO, and other styles
4

MacInnis, Daniel V. 1964. "Development of a system dynamics based management flight simulator for new product development." Thesis, Massachusetts Institute of Technology, 2004. http://hdl.handle.net/1721.1/34732.

Full text
Abstract:
Thesis (S.M.)--Massachusetts Institute of Technology, System Design & Management Program, 2004.<br>Includes bibliographical references (p. 152-153).<br>All firms in any mature product development industry are being pressured into performing 'better, faster, and cheaper' by both customers and competitors. In short, firms are being tasked with doing more, with less, faster. This leads to product development organizations being unrealistically tasked to deliver on these programs that often lead to projects falling behind schedule, over budget, and with inadequate quality. While striving to do the
APA, Harvard, Vancouver, ISO, and other styles
5

Dambietz, Florian M., and Dieter Krause. "Simulation modularer Produktarchitekturen durch modellbasierte Konfiguration." Thelem Universitätsverlag & Buchhandlung GmbH & Co. KG, 2021. https://tud.qucosa.de/id/qucosa%3A75900.

Full text
Abstract:
Im Zuge der Globalisierung sehen sich produzierende Unternehmen mit einem kontinuierlich anwachsenden Wettbewerbsdruck konfrontiert. Aufgrund dessen sehen sich viele Marktakteure zu einer intensivierten Spezialisierung gezwungen, um auf kunden-individuelle Anforderungen eingehen zu können. Einen möglichen Lösungsansatz zur Bewältigung dieser Herausforderung bietet der Ansatz der Modularisierung. Hier wird allerdings nicht konkret ein Baukasten definiert, vielmehr werden verschiedene Alternativen generiert. Die Entscheidung, welcher Baukasten schlussendlich implementiert wird, fällt meist aufgr
APA, Harvard, Vancouver, ISO, and other styles
6

Natter, Martin, Andreas Mild, Markus Feurstein, Georg Dorffner, and Alfred Taudes. "The effect of incentive schemes and organizational arrangements on new product development process." SFB Adaptive Information Systems and Modelling in Economics and Management Science, WU Vienna University of Economics and Business, 2001. http://epub.wu.ac.at/160/1/document.pdf.

Full text
Abstract:
This paper proposes a new model for studying the new product development process in an artificial environment. We show how connectionist models can be used to simulate the adaptive nature of agents' learning exhibiting similar behavior as practically experienced learning curves. We study the impact of incentive schemes (local, hybrid and global) on the new product development process for different types of organizations. Sequential organizational structures are compared to two different types of team-based organizations, incorporating methods of Quality Function Deployment such as the House of
APA, Harvard, Vancouver, ISO, and other styles
7

Machchhar, Raj Jiten. "Automated Model Generation and Pre-Processing to Aid Simulation-Driven Design : An implementation of Design Automation in the Product Development process." Thesis, Linköpings universitet, Maskinkonstruktion, 2020. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-168738.

Full text
Abstract:
The regulations on emissions from a combustion engine vehicle are getting tougher with increasing awareness on sustainability, requiring the exhaust after-treatment systems to constantly evolve to the changes in the legislation. To establish a leading position in the competitive market, companies must adapt to these changes within a reasonable timeframe. With Scania’s extensive focus on Simulation-driven design, the product development process at Scania is highly iterative. A considerable amount of time is spent on generating a specific model for a simulation from the existing Computer-aided D
APA, Harvard, Vancouver, ISO, and other styles
8

Mason, Byron A. "Reconfigurable modelling of physically based systems: Dynamic modelling and optimisation for product design and development applied to the automotive drivetrain system." Thesis, University of Bradford, 2009. http://hdl.handle.net/10454/3355.

Full text
Abstract:
The work of this thesis is concerned with the aggregation and advancement of modelling practise as used within modern day product development and optimisation environments making use of Model Based Design (¿MBD¿) and similar procedures. A review of model development and use forms the foundation of the work, with the findings being aggregated into two unique approaches for rapid model development and reconfiguration; the Plug-and-Simulate (¿PaS¿) approach and the Paradigm for Large Model Creation (¿PLMC¿); each shown to posses its own advantages. To support the MBD process a model optimi
APA, Harvard, Vancouver, ISO, and other styles
9

Gbededo, Mijoh Ayodele. "Simulation-based impact analysis for sustainable manufacturing design and management." Thesis, University of Derby, 2018. http://hdl.handle.net/10545/623483.

Full text
Abstract:
This research focuses on effective decision-making for sustainable manufacturing design and management. The research contributes to the decision-making tools that can enable sustainability analysts to capture the aspects of the economic, environmental and social dimensions into a common framework. The framework will enable the practitioners to conduct a sustainability impact analysis of a real or proposed manufacturing system and use the outcome to support sustainability decision. In the past, the industries had focused more on the economic aspects in gaining and sustaining their competitive p
APA, Harvard, Vancouver, ISO, and other styles
10

Mason, Byron. "Reconfigurable modelling of physically based systems : dynamic modelling and optimisation for product design and development applied to the automotive drivetrain system." Thesis, University of Bradford, 2009. http://hdl.handle.net/10454/3355.

Full text
Abstract:
The work of this thesis is concerned with the aggregation and advancement of modelling practise as used within modern day product development and optimisation environments making use of Model Based Design ('MBD') and similar procedures. A review of model development and use forms the foundation of the work, with the findings being aggregated into two unique approaches for rapid model development and reconfiguration; the Plug-and-Simulate ('PaS') approach and the Paradigm for Large Model Creation ('PLMC'); each shown to posses its own advantages. To support the MBD process a model optimisation
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Simulation based product development"

1

Eerme, Martin. Structural modelling of engineering products and realisation of computer-based environment for product development. Tallinn Technical University, 2001.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Shunmugam, M. S., and M. Kanthababu, eds. Advances in Simulation, Product Design and Development. Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-32-9487-5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Mehra, Neelesh Kumar, and Arvind Gulbake. Micro- and Nanotechnologies-Based Product Development. CRC Press, 2021. http://dx.doi.org/10.1201/9781003043164.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Porretta, Sebastiano, Howard Moskowitz, and Attila Gere, eds. Consumer-based New Product Development for the Food Industry. Royal Society of Chemistry, 2021. http://dx.doi.org/10.1039/9781839163333.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Anand, D. K. Simulation-based innovation and discovery: Energetics applications. CALCE EPSC Press, 2011.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Erekutoronikusu, Nikkei, ed. Moderu bēsu kaihatsu: Moderingu, puranto moderu, kontorōru moderu = Model-based development. Nikkei BP Sha, 2013.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Karniel, Arie. Managing the Dynamics of New Product Development Processes: A New Product Lifecycle Management Paradigm. Springer-Verlag London Limited, 2011.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Agent-based computer simulation of dichotomous economic growth. Kluwer Academic, 2000.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Shehab, Esam Mahmoud. An intelligent knowledge based cost modelling system for innovative product development. De Montfort University, 2001.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

The 16-bit microprocessor: An 8086/8088 based product-development approach. CompTech, 1986.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Simulation based product development"

1

Neugebauer, R., P. Klimant, and V. Wittstock. "Virtual-Reality-Based Simulation of NC Programs for Milling Machines." In Global Product Development. Springer Berlin Heidelberg, 2011. http://dx.doi.org/10.1007/978-3-642-15973-2_70.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Sarmah, Sidharth, and Dilip Datta. "Product Priority Problem: A Multi-objective Optimization Approach for Product Development Based on Customers’ Priority." In Modeling, Simulation and Optimization. Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-15-9829-6_8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Srinivas, Chandanam, Ravela Naveen, and Bijjam Ramgopal Reddy. "Design of Row-based Machine Layout—A Case Study." In Advances in Simulation, Product Design and Development. Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-32-9487-5_25.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Kumaravelu, R., and S. Poornima. "ARM Controller Based Smart Loom for Generating Basic Weaves." In Advances in Simulation, Product Design and Development. Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-32-9487-5_68.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Rathore, Nikki, P. K. Jain, and M. Parida. "A MATLAB-Based Application to Solve Vehicle Routing Problem Using GA." In Advances in Simulation, Product Design and Development. Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-32-9487-5_22.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Sreenivasulu, R., and Ch Srinivasa Rao. "Some Investigations on Drilling of Aluminium Alloy from FEA-Based Simulation Using DEFORM-3D." In Advances in Simulation, Product Design and Development. Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-32-9487-5_1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Satish Babu, D., P. N. Vijay Vittal, Pollov Sarmah, and Veena G. Dikshit. "Design, Development, and Modeling of EMLA-Based Wheel Brake Actuation System for an UAV." In Advances in Simulation, Product Design and Development. Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-32-9487-5_29.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Alam, Z., D. A. Khan, F. Iqbal, A. Kumar, and S. Jha. "Design and Development of Cartridge-Based Automated Fluid Delivery System for Ball End Magnetorheological Finishing Process." In Advances in Simulation, Product Design and Development. Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-32-9487-5_67.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Baskar, A., M. Anthony Xavior, N. Nithyanandan, and B. Dhanasakkaravarthi. "Analysis of a Few Heuristics Proposed Based on Slope Indices to Solve Simple Type—I Assembly-Line Balancing Problems." In Advances in Simulation, Product Design and Development. Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-32-9487-5_41.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Pessôa, Marcus Vinicius Pereira, and Luís Gonzaga Trabasso. "Robot Based Flight Simulator Development Project." In The Lean Product Design and Development Journey. Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-46792-4_16.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Simulation based product development"

1

Zhang, Weimin, Mincai Zhu, and Hongmin Chen. "Simulation-Based Estimation for Product Development Processes." In 2008 4th International Conference on Wireless Communications, Networking and Mobile Computing (WiCOM). IEEE, 2008. http://dx.doi.org/10.1109/wicom.2008.1783.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Wamsher, Brian. "The Application of Simulation Based Product Development Practices." In HT2021. ASM International, 2021. http://dx.doi.org/10.31399/asm.cp.ht2021exabp0083.

Full text
Abstract:
Abstract The use of simulation-based process modeling tools with the intent of reducing iterative physical component testing and process development costs when designing new components was investigated. Several processing and testing phases were simulated to generate physical properties and geometries which could then be compared against how physical components put through the same processes reacted. These comparisons were repeated over several trials to validate their results. A good correlation between simulation and physical component response was found, and that iterative simulations could
APA, Harvard, Vancouver, ISO, and other styles
3

Tao, Jing, and Suiran Yu. "Sustainable Product Family Planning Based on Product Life Cycle Simulation." In ASME 2012 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/detc2012-70585.

Full text
Abstract:
Product variety and improvements are the most important issues of today’s product development. Product family engineering is considered to be an effective approach to create new products that apply variability with decreased costs and time. However, given the environmental considerations, this study proposed sustainable product family planning which is a systematic design framework of product function; structure and lifecycle options (i.e. reduce, reuse and recycle). First, relationships between the diverse customer needs, product’s technical attributes and physical architecture are analyzed.
APA, Harvard, Vancouver, ISO, and other styles
4

"STEP-BASED MODELING & SIMULATION FOR VIRTUAL PRODUCT DEVELOPMENT." In 1st International Conference on Simulation and Modeling Methodologies, Technologies and Applications. SciTePress - Science and and Technology Publications, 2011. http://dx.doi.org/10.5220/0003596302240227.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Yang, Tae G., Kosuke Ishii, and Harshavardhan Karandikar. "Decision Analysis Approach for Improving Product Development Decision Quality: An Interactive Simulation Game Showcase." In ASME 2005 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. ASMEDC, 2005. http://dx.doi.org/10.1115/detc2005-85598.

Full text
Abstract:
Product development decisions in the early stages of the development process critically impact life cycle cost and revenue potentials. Design for Manufacturability tools and methods provide key insights into product’s requirements based on the voice of customers. Other quantitative analysis tools, such as computer aided modeling and optimization techniques enhance product developers’ understanding in the products under development. However, the dynamic nature of product development process suffers from unavoidable risks due to the lack of information on key parameters of a product’s life cycle
APA, Harvard, Vancouver, ISO, and other styles
6

Liu, Ming-Zhu, Xiao-Dong Zhang, and Yang Hu. "Mass Collaborative Product Development System Simulation Model Based on Participants Learning." In 2012 Third International Conference on Digital Manufacturing and Automation (ICDMA). IEEE, 2012. http://dx.doi.org/10.1109/icdma.2012.122.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Zhang, Xiaodong, Jianwei Wang, Le Luo, and Yingzi Li. "Real-time task scheduling behavior in agent-based product development process simulation." In 2010 14th International Conference on Computer Supported Cooperative Work in Design (CSCWD). IEEE, 2010. http://dx.doi.org/10.1109/cscwd.2010.5471960.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Sands, Benjamin, Debra Stephens, Thomas J. Laliberty, and Naresh Raja. "Manufacturing Simulations Based on Integrated Product/Process Models." In ASME 1997 Design Engineering Technical Conferences. American Society of Mechanical Engineers, 1997. http://dx.doi.org/10.1115/detc97/dfm-4355.

Full text
Abstract:
Abstract Integrated Product Process Development is essential to the development of competitive products, with manufacturing considerations such as cost, quality and cycle times well understood early in the design cycle. In order to rapidly design and develop new products, diverse organizations, often separated by hundreds of miles, must find new ways of sharing ideas and knowledge and working together towards common goals. New tools must be inserted into the process to enable and facilitate a different way of doing business. This paper summarizes work performed as part of the DARPA sponsored R
APA, Harvard, Vancouver, ISO, and other styles
9

Kusmik, W. Aldo. "Optimization in the Simulation Based Design Environment." In ASME 2001 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2001. http://dx.doi.org/10.1115/detc2001/vib-21497.

Full text
Abstract:
Abstract Simulation based design methodologies have the potential to streamline the development and continuous improvement of complex products by addressing three fundamental aspects of team-based product development initiatives: coordination, collaboration, and optimization. On-going research funded by the Office of Naval Research is seeking to augment its baseline simulation based design environment with enhanced system integration, visualization, and optimization capabilities that address these three aspects of the product development process. The inherent strengths of the existing software
APA, Harvard, Vancouver, ISO, and other styles
10

Larsson, Tobias, Andreas Larsson, and Lennart Karlsson. "Distributed Multibody Dynamic Analysis Within Product Development." In ASME 2001 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2001. http://dx.doi.org/10.1115/detc2001/cie-21282.

Full text
Abstract:
Abstract A method that supports distribution of multibody dynamic analysis is proposed and developed. Ethnographic methods are used as a means for gaining a deeper understanding of the engineering analysis work practice, and the findings form the base for a cooperative design of the system. The concept of design rationale is applied in order to deal with current problems of engineering analysis, such as irrelevant input and output, as well as satisfying the need for useful, real-time feedback. The web based simulation environment, applied to vehicle system dynamics, contains the simulation pac
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Simulation based product development"

1

johansson, Bjorn, Kevin Lyons, Ram D. Sriram, and Gaurav Ameta. Modeling, simulation and analysis for sustainable product development. National Institute of Standards and Technology, 2010. http://dx.doi.org/10.6028/nist.ir.7745.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

WRIGHT BROTHERS INSTITUTE INC DAYTON OHIO. SensorCraft - Simulation-Based Research and Development. Defense Technical Information Center, 2006. http://dx.doi.org/10.21236/ada455942.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Shao, Goudong, and Y. Tina Lee. Simulation modeling of emergency response facility based on software product line technology. National Institute of Standards and Technology, 2007. http://dx.doi.org/10.6028/nist.ir.7444.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Fischer, J. Active Desiccant-Based Preconditioning Market Analysis and Product Development. Office of Scientific and Technical Information (OSTI), 2001. http://dx.doi.org/10.2172/777700.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Campbell, Charlotte H., and Daniel E. Deter. Guide to Development of Structured Simulation-Based Training. Defense Technical Information Center, 1997. http://dx.doi.org/10.21236/ada328666.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Kizakevich, Paul N. Development of a Self Aid/Buddy Aid Simulation-Based Training Program. Defense Technical Information Center, 2002. http://dx.doi.org/10.21236/ada411434.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Campbell, Charlotte H., Daniel E. Deter, and Kathleen A. Quinkert. Report on the Expanded Methodology for Development of Structured Simulation-Based Training Programs. Defense Technical Information Center, 1997. http://dx.doi.org/10.21236/ada328671.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Kim, Mun-young, Hyun-jin Cho, and Eunah Yoh. Utilizing University-based Enterprise to Foster Industry-Academia Collaboration in the Field of Product Development. Iowa State University, Digital Repository, 2015. http://dx.doi.org/10.31274/itaa_proceedings-180814-1162.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Sticha, Paul J. Research and Development on the Characterization of Simulation-Based Training Systems: Project Executive Summary. Defense Technical Information Center, 1990. http://dx.doi.org/10.21236/ada227361.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Author, Not Given. Development of CFD-Based Simulation Tools for In-Situ Thermal Processing of Oil Shale/Sands. Office of Scientific and Technical Information (OSTI), 2012. http://dx.doi.org/10.2172/1053607.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Simulation based product development' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography