Log in

Relevant bibliographies by topics / Single-wall carbon nanotubes

Contents

Journal articles
Dissertations / Theses
Books
Book chapters
Conference papers
Reports

Academic literature on the topic 'Single-wall carbon nanotubes'

Author: Grafiati

Published: 4 June 2021

Last updated: 6 September 2023

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Single-wall carbon nanotubes.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Single-wall carbon nanotubes"

1

Prasad, Shiva, Harish Venkat Reddy, and Ashok Godekere. "Properties of Carbon Nanotubes and their applications in Nanotechnology – A Review." Mapana Journal of Sciences 20, no. 4 (October 1, 2021): 49–64. http://dx.doi.org/10.12723/mjs.59.4.

Full text

Abstract:

One of the most distinctive inventions in the world of nanotechnology is the carbon nanotube (CNT). Many scholars around the world have been studying carbon nanotubes (CNTs) over the past two decades due to their enormous potential in a variety of sectors. Single-wall CNTs with dimensions in the nanometer range are commonly referred to as carbon nanotubes. Carbon nanotubes are also known as multi-wall CNTs, which are made up of nested single-wall CNTs that are weakly bonded together in a tree ring-like structure by van der Waals interactions. Tubes having an unknown carbon wall structure and diameters smaller than 100 nanometers are also referred to as carbon nanotubes. A carbon nanotube's length is often substantially longer than its diameter, according to standard manufacturing methods. Carbon nanotubes are capable of exhibiting a variety of remarkable properties. CNTs have distinct electrical, mechanical and optical properties that have all been thoroughly investigated. The properties and applications of carbon nanotubes are the focus of this review.

APA, Harvard, Vancouver, ISO, and other styles

2

BULASHEVICH, K. A., R. A. SURIS, and S. V. ROTKIN. "EXCITONS IN SINGLE-WALL CARBON NANOTUBES." International Journal of Nanoscience 02, no. 06 (December 2003): 521–26. http://dx.doi.org/10.1142/s0219581x03001632.

Full text

Abstract:

Excitonic states in single-wall carbon nanotubes have been studied within the tight-binding approximation. An analytical expression for the dielectric function of the nanotube has been obtained in the random phase approximation. It was demonstrated that calculations with the static dielectric function yield an overestimated exciton binding energy exceeding the nanotube energy gap. Self-consistent calculation of the exciton binding energy with the frequency-dependent dielectric function has been performed. The binding energy to energy gap ratio has been shown to have no dependence on the nanotube radius and to be a universal constant ~0.87 for given resonance integral γ0=2.7 eV .

APA, Harvard, Vancouver, ISO, and other styles

3

McEuen, Paul L. "Single-wall carbon nanotubes." Physics World 13, no. 6 (June 2000): 31–36. http://dx.doi.org/10.1088/2058-7058/13/6/26.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Lukes, Jennifer R., and Hongliang Zhong. "Thermal Conductivity of Individual Single-Wall Carbon Nanotubes." Journal of Heat Transfer 129, no. 6 (September 15, 2006): 705–16. http://dx.doi.org/10.1115/1.2717242.

Full text

Abstract:

Despite the significant amount of research on carbon nanotubes, the thermal conductivity of individual single-wall carbon nanotubes has not been well established. To date only a few groups have reported experimental data for these molecules. Existing molecular dynamics simulation results range from several hundred to 6600 W∕m K and existing theoretical predictions range from several dozens to 9500 W∕m K. To clarify the several-order-of-magnitude discrepancy in the literature, this paper utilizes molecular dynamics simulation to systematically examine the thermal conductivity of several individual (10, 10) single-wall carbon nanotubes as a function of length, temperature, boundary conditions and molecular dynamics simulation methodology. Nanotube lengths ranging from 5 nm to 40 nm are investigated. The results indicate that thermal conductivity increases with nanotube length, varying from about 10 W∕m to 375 W∕m K depending on the various simulation conditions. Phonon decay times on the order of hundreds of fs are computed. These times increase linearly with length, indicating ballistic transport in the nanotubes. A simple estimate of speed of sound, which does not require involved calculation of dispersion relations, is presented based on the heat current autocorrelation decay. Agreement with the majority of theoretical/computational literature thermal conductivity data is achieved for the nanotube lengths treated here. Discrepancies in thermal conductivity magnitude with experimental data are primarily attributed to length effects, although simulation methodology, stress, and intermolecular potential may also play a role. Quantum correction of the calculated results reveals thermal conductivity temperature dependence in qualitative agreement with experimental data.

APA, Harvard, Vancouver, ISO, and other styles

5

Smith, Brian W., and David E. Luzzi. "Encapsulated Fullerenes Within Single Wall Carbon Nanotubes." Microscopy and Microanalysis 5, S2 (August 1999): 182–83. http://dx.doi.org/10.1017/s1431927600014239.

Full text

Abstract:

It is well documented that the pulsed laser vaporization of graphite produces both carbon nanotubes and C60 in the presence of certain metallic catalysts. In nanotube production most of the Ceo is removed along with other residual contaminants during succeeding purification and annealing steps. The possibility of C60 becoming trapped inside a nanotube during this elaborate sequence has been considered but not previously detected.Nanotubes are observed with high resolution transmission electron microscopy under conditions chosen to minimize both exposure time and irradiation damage. Since a nanotube satisfies the weak phase object approximation, its image is a projection of the specimen -potential in the direction of the electron beam. The image has maximum contrast where the beam encounters the most carbon atoms, which occurs where it is tangent to the tube’s walls. Thus, the image consists of two dark parallel lines whose separation is equal to the tube diameter, 1.4 nm.

APA, Harvard, Vancouver, ISO, and other styles

6

Chattopadhyay, Jayanta, Anil K. Sadana, Feng Liang, Jonathan M. Beach, Yunxuan Xiao, Robert H. Hauge, and W. E. Billups. "Carbon Nanotube Salts. Arylation of Single-Wall Carbon Nanotubes." Organic Letters 7, no. 19 (September 2005): 4067–69. http://dx.doi.org/10.1021/ol050862a.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Umapathi, K., Yalamanchili Sangeetha, A. N. Shankar, P. Vidhyalakshmi, R. Ramkumar, S. Balakumar, and D. Magdalinmary. "Computational Investigations of Fixed-Free and Fixed-Fixed Types Single-Wall Carbon Nanotube Mass Sensing Biosensor." Advances in Materials Science and Engineering 2021 (June 22, 2021): 1–13. http://dx.doi.org/10.1155/2021/3253365.

Full text

Abstract:

Using carbon nanotubes for sensing the mass in a biosensor is recently proven as an emerging technology in healthcare industry. This study investigates relative frequency shifts and sensitivity studies of various biological objects such as insulin hormone, immunoglobulin G (IgG), the most abundant type of antibody, and low-density lipoproteins (LDL) masses using the single-wall carbon nanotubes as a biomass sensor via continuum mechanics. Uniform distributed mass is applied to the single-wall carbon nanotube mass sensor. In this study, fixed-free and fixed-fixed type single-wall carbon nanotubes with various lengths of relative frequency shifts are studied. Additionally, the sensitivity analysis of fixed-free and fixed-fixed type CNT biological mass sensors is carried out. Moreover, mode shapes studies are performed. The sensitivity results show better, if the length of the single-wall carbon nanotube is reduced.

APA, Harvard, Vancouver, ISO, and other styles

8

Mananghaya, Michael, Emmanuel Rodulfo, Gil Nonato Santos, and Al Rey Villagracia. "Theoretical Investigation on the Solubilization in Water of Functionalized Single-Wall Carbon Nanotubes." Journal of Nanotechnology 2012 (2012): 1–6. http://dx.doi.org/10.1155/2012/780815.

Full text

Abstract:

An important technique to increase the solubility and reactivity of carbon nanotube is through functionalization. In this study, the effects of functionalization of some single-walled carbon nanotubes (SWCNTs) were investigated with the aid of density functional theory. The SWCNT model used in the study consists of a finite, (5, 0) zigzag nanotube segment containing 60 C atoms with hydrogen atoms added to the dangling bonds of the perimeter carbons. There are three water-dispersible SWCNTs used in this study that were functionalized with (a) formic acid, as a model of carboxylic acid, (b) isophthalic acid, as a model aromatic dicarboxylic acid, and (c) benzenesulfonic acid, as a model aromatic sulfonic acid. Binding energies of the organic radicals to the nanotubes are calculated, as well as the HOMO-LUMO gaps and dipole moments of both nanotubes and functionalized nanotubes. Binding was found out to be thermodynamically favorable. The functionalization increases the electrical dipole moments and results in an enhancement in the solubility of the nanotubes in water manifested through favorable changes in the free energies of solvation. This should lower the toxicity of nanotubes and improve their biocompatibility.

APA, Harvard, Vancouver, ISO, and other styles

9

ERKOÇ, ŞAKIR. "FROM CARBON NANOTUBES TO CARBON NANORODS." International Journal of Modern Physics C 11, no. 06 (September 2000): 1247–55. http://dx.doi.org/10.1142/s0129183100001061.

Full text

Abstract:

The structural properties of single and multi-wall carbon nanotubes and the formation of carbon nanorods from multi-wall carbon nanotubes have been investigated by performing molecular-dynamics computer simulations. Calculations have been realized by using an empirical many-body potential energy function for carbon. It has been found that carbon nanorod formation takes place with smallest possible multi-wall nanotubes under heat treatment. On the other hand, it has been also found that single-wall carbon nanotubes are stronger than the multi-wall nanotubes against heat treatment.

APA, Harvard, Vancouver, ISO, and other styles

10

Monthioux, M. "Filling single-wall carbon nanotubes." Carbon 40, no. 10 (August 2002): 1809–23. http://dx.doi.org/10.1016/s0008-6223(02)00102-1.

Full text

APA, Harvard, Vancouver, ISO, and other styles

More sources

Dissertations / Theses on the topic "Single-wall carbon nanotubes"

1

Sirdeshmukh, Ranjani. "Biological functionalization of single-wall carbon nanotubes." Access to citation, abstract and download form provided by ProQuest Information and Learning Company; downloadable PDF file 0.97Mb, 59 p, 2005. http://gateway.proquest.com/openurl?url_ver=Z39.88-2004&res_dat=xri:pqdiss&rft_val_fmt=info:ofi/fmt:kev:mtx:dissertation&rft_dat=xri:pqdiss:1428206.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Holt, Brian D. "Cellular Processing of Single Wall Carbon Nanotubes." Research Showcase @ CMU, 2014. http://repository.cmu.edu/dissertations/397.

Full text

Abstract:

Nanostructured materials are hailed to be the solutions of the future for many research areas, and single wall carbon nanotubes (SWCNTs) are one of the more interesting materials due to their highly desirable electronic, optical, thermal and mechanical properties. For instance, this combination of properties is of wide interest for biological applications, including cellular technologies. However, understanding cellular processing of SWCNTs is limited. In this thesis, quantification of sub-cellular events–including SWCNT uptake rates, altered mitosis, redistribution of sub-cellular components and reduced cellular functionalities–is used to formulate insight into how cells internalize and process SWCNTs. By understanding sub-cellular processing of SWCNTs, new basic science endeavors and SWCNT-based biological applications can be more effectively developed, and the insights can be generalized to other nanostructured materials.

APA, Harvard, Vancouver, ISO, and other styles

3

Son, HyungBin 1981. "Raman spectroscopy of single wall carbon nanotubes." Thesis, Massachusetts Institute of Technology, 2008. http://hdl.handle.net/1721.1/44725.

Full text

Abstract:

Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 2008.
Includes bibliographical references (p. 71-76).
A single wall carbon nanotube (SWNT) is a new form of carbon, whose atomic arrangement is equivalent to a graphene sheet rolled into a cylinder in a seamless way. The typical diameter of a SWNT ranges from 0.6 nm to several nm and the typical length ranges from tens of nm to several cm. Due to its small diameter and high aspect ratio, a SWNT has very unique electronic and vibrational properties. The goals of this thesis work are to design and construct a Raman instrument capable of obtaining signals from many different types of individual SWNTs, to develop methods and tools to collect, organize and analyze large amounts of Raman spectra from them, to use resonant Raman spectroscopy to characterize individual SWNTs, and to investigate how their electronic and vibrational properties change under various conditions, such as strain, or different substrate interactions. A high-efficiency widely-tunable Raman instrument is developed for the study of SWNTs. The environmental effects on the electronic and vibrational properties are investigated by suspended SWNTs. Using the high-efficiency Raman instrument, weak optical transitions of metallic SWNTs are found. The effect of strain on the vibrational mode frequencies of SWNTs are studied.
by Hyungbin Son.
Ph.D.

APA, Harvard, Vancouver, ISO, and other styles

4

Crisan, Alina Dora. "Non-collinear magnetoeletronics in single wall carbon nanotubes." Phd thesis, Université Paris Sud - Paris XI, 2013. http://tel.archives-ouvertes.fr/tel-00976618.

Full text

Abstract:

Recent developments in the field of nanotechnology allowed the access to adequate length scale necesary to closely investigate spins and opened large prospects of using electrons spin degree of freedom in new generation electronic devices. This have lead to the development of a vibrant field dubbed spintronics.Here, we present experiments that combine two very promising materials: namely cardon nanotubes and palladium-nickel (PdNi), with the purpose to manipulate the electronic spin both in the classical and in the quantum regime. We implement a quantum dot connected to two non-collinear ferromagnetic leads that acts as a spin-valve device. The versatility of carbon nanotubes to fabricate quantum dots when connected to PdNi electrodes via tunneling barriers is combined with the particular transversal anisotropy of the PdNi when shaped in nanometric stripes.For devices exploiting actively the electronic spin, however control over classical or quantum spin rotations has still to be achieved. A detailed understanding of the magnetic characteristics of PdxNi 100-x alloy is crucial both for understanding the switching characteristics of such the spin-valve device and for optimizing its electronic properties. We present a magnetic study of Pd20Ni80 and Pd90Ni10 nanostripes by means of extraordinary Hall effect measurements, at low temperature, for various dimensions, thicknesses and capping films. In the case of Pd20Ni80, this experiment is a first at low temperature.The CNT-based device proposed here was tested both in linear and nonlinear transportregimes. While the linear spin dependent transport displays the usual signatures of electronicconfinement, the finite bias magnetoresistance displays an impressive magnetoresistance antisymmetric reversal in contrast with the linear regime. This effect can only be understood if electronic interactions are considered. It is accompanied by a linear dispersion of the zeromagnetoresistance point in the bias-field plane. Simulations based on a proposed model confirm a current induced spin precession, electrically tunable due to the quantum nature ofthe device.

APA, Harvard, Vancouver, ISO, and other styles

5

LUCCI, MASSIMILIANO. "Gas sensor based on single wall carbon nanotubes." Doctoral thesis, Università degli Studi di Roma "Tor Vergata", 2008. http://hdl.handle.net/2108/601.

Full text

Abstract:

Single-walled carbon nanotubes (SWNTs) are nowadays one of the most investigated materials and the realization of ordered SWNT structures is of fundamental importance for the improvement of many technological fields, from the non-linear optics to the realization of transistor, to the assembly of gas sensing devices. A SWNT is formed by rolling a graphene sheet into a seamless cylinder with a diameter on the nanometer scale. The individual SWNTs are joined each other and assembled into bundles by Van der Waals forces. Guest molecules can potentially interact with SWNTs via the outer surfaces of bundles, the inside of the tubes and /or the interstitial channels between the tubes in a bundle. These different situations are expected to play an important role in tuning the guest molecule/SWNT interaction during gas adsorption and/or desorption, and have been investigated theoretically and experimentally using different approaches. In particular, the interaction between gaseous molecules and SWNTs has been investigated from different point of view, including gas storage and gas detection through modification of electronic and thermal properties or through modification of the field emission properties. Compared with conventional solid-state sensors, that typically operate at temperatures over 200 °C, and conducting polymers-based sensors, that provide only limited sensitivity, sensing devices assembled with single-wall nanotubes can exhibit high sensitivity and fast response time at room temperature. Due to the high surface area of nanotubes, a little amount of nanotube material can provide many sites for gas interaction. The accessibility of these sites depends on the status of aggregation of the nanotubes. Our preliminary studies suggested that the sensitivity of a nanotube-based device can be optimized controlling the organization of the SWNTs. Ordered bundles of SWNTs exhibit indeed a sensitivity double with respect to that of a disordered deposit. This is likely due to the enhancement of surface area for organized SWNT systems with respect to randomly placed SWNT bundles. Hence, aligned nanotubes can serve as a very efficient material for use in gas detection. Directionality of SWNT can be obtained directly during the synthesis process, or after manipulation of dispersed nanotubes, by mean of several methods, such as filtration/deposition from suspension in strong magnetic fields, field emission, electrophoresis or dielectrophoretical processes. In particular the use of electric fields to move, position and align SWNTs has been reported in recent papers and the results indicate that both the electrophoresis (EP) and dielectrophoresis (DEP) routes have potential advantages for arranging nanotubes in controlled systems. Beyond the sensitivity, another severe constraint for gas detection is the time either for the reset of the sensor after exposure to the gas, either for the acceleration of the response itself. Since practical applications can be severely limited by slow absorption/desorption processes, we felt it worthwhile to investigate in a systematic way some physical parameters affecting the sensor response. In this thesis we present a study of NH3 ,NOx and H2 detection using organized SWNTs as sensing material and an innovative procedure to improve the time response of the sensor by applying a back gate voltage. Moreover study on gas detection and gas storage were done using QCM sensor.

APA, Harvard, Vancouver, ISO, and other styles

6

Liang, Jianghong. "Single Wall Carbon Nanotube/Polyacrylonitrile Composite Fiber." Thesis, Georgia Institute of Technology, 2004. http://hdl.handle.net/1853/7613.

Full text

Abstract:

Single Wall Carbon Nanotubes (SWNTs), discovered in 1993, have good mechanical, electrical and thermal properties. Polyacrylonitrile (PAN) is an important fiber for textiles as well as a precursor for carbon fibers. PAN has been produced since 1930s. In this study, we have processed SWNT/PAN fibers by dry-jet wet spinning. Purified SWNT, nitric acid treated SWNTs, and benzonitrile functionalized SWNTs have been used. Fiber processing was done in Dimethyl Formamide (DMF) and coagulation was done in DMF/water mixture. The coagulated fibers were drawn (draw ratio of 6) at 95 oC. Structure, orientation, and mechanical properties of these fibers have been studied. The cross-sections for all the fibers are not circular. Incorporation of SWNT in PAN results in improved mechanical properties, tensile modulus increased from 7.9 GPa for control PAN to 13.7 GPa for SWNT/PAN composite fiber, and functionalized SWNTs result in higher improvements with tensile modulus reaching 17.8 GPa for acid treated SWNT/PAN composite fibers. The theoretical analysis suggests that observed moduli of the composite fibers are consistent with the predicted values.

APA, Harvard, Vancouver, ISO, and other styles

7

Yang, Yang. "Electronic devices based on individual single wall carbon nanotubes." Thesis, University of Cambridge, 2014. https://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.708116.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Gao, Bo. "Multi-terminal elecron transport in single-wall carbon nanotubes." Paris 6, 2006. http://www.theses.fr/2006PA066176.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Wang, Tong. "Light Scattering Study on Single Wall Carbon Nanotube (SWNT) Dispersions." Thesis, Georgia Institute of Technology, 2004. http://hdl.handle.net/1853/5200.

Full text

Abstract:

Carbon nanotubes, and particularly single wall carbon nanotubes (SWNTs) have attracted much attention for their unique structure, as well as for their excellent mechanical, electrical and thermal properties. Most properties of carbon nanotubs are closely related with its anisotropic structure and geometry factor. Characterization of carbon nanotube length is critical for understanding their behavior in solutions as well as in polymer composites. Microscopy, particularly atomic force microscopy, has been used for their length measurement. Microscopy, though straightforward, is quite laborious, particularly for statistically meaningful sampling. Light scattering can be used to measure particle dimensions. In this study, light scattering has been used to study polyvinyl pyrrolidone (PVP) wrapped SWNTs surfactant assisted aqueous dispersion and SWNT dispersion in oleum. To determine the length of SWNTs, Stokes - Mueller formalism was used, which is a universal model for particles with any size and shape. The Mueller matrix for an ensemble of long, thin cylinders proposed by McClain et al. was used in this study. This Mueller matrix includes the information of size (length and radius) and optical constants (refractive index and extinction coefficient) of cylinders. In this matrix, extinction coefficient, radius and length of SWNTs are unknown. By normalizing scattering intensity I(theta) (theta from 30 to 155 degree) to that at 30degree , the effects of radius and extinction coefficient were cancelled out. Thus, the effect of SWNT length on scattering intensity could be studied independently. A series of curves of normalized scattering intensity of SWNTs (I(theta) /I(30degree)) with varied length as a function of wave vector were predicted. A curve of normalized scattering intensity of SWNT as a function of wave vector was also obtained experimentally. By comparing experimental and predicted curves, average SWNT length in the dispersion has been determined. Scattering intensity at a given angle initially increases with concentration, and then reaches a critical concentration(C*), above which the scattering intensity decreases. This phenomenon has been attributed to the competition between scattering and absorption of light by the presence of SWNT. By using Beer-Lambert law, this phenomenon has been used to determine the molar absorption coefficient of SWNTs.

APA, Harvard, Vancouver, ISO, and other styles

10

Liu, Huijun. "Properties of small radius single-wall carbon nanotubes from first-principles calculations /." View Abstract or Full-Text, 2003. http://library.ust.hk/cgi/db/thesis.pl?PHYS%202003%20LIU.

Full text

APA, Harvard, Vancouver, ISO, and other styles

More sources

Books on the topic "Single-wall carbon nanotubes"

1

National Institute of Standards and Technology (U.S.), ed. Measurement issues in single wall carbon nanotubes. Gaithersburg, Md: U.S. Dept. of Commerce, National Institute of Standards and Technology, 2008.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

2

National Aeronautics and Space Administration (NASA) Staff. Purification Procedures for Single-Wall Carbon Nanotubes. Independently Published, 2018.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

3

Shi, Z. J., and Z. N. Gu. New phenomena in the nanospace of single-wall carbon nanotubes. Edited by A. V. Narlikar and Y. Y. Fu. Oxford University Press, 2017. http://dx.doi.org/10.1093/oxfordhb/9780199533053.013.12.

Full text

Abstract:

This article describes the new phenomena of chemical substances encapsulated in the hollow spaces of carbon nanotubes, with particular emphasis on the nanospace of single-wall carbon nanotubes (SWNTs) that have nanospaces of about 1 nm in diameter. It begins with a brief introduction to the filling methods and the filling of multiwalled carbon nanotubes, followed by a discussion of the structures, phase transitions and chemical reactions of some typical fullerenes, endohedral metallofullerenes, fullerene derivatives, and inorganic and organic compounds, in the nanospace of SWNTs. The electron transfer between dopants and SWNTs is also examined. The article also considers the filling of double-walled carbon nanotubes.

APA, Harvard, Vancouver, ISO, and other styles

4

Gaass, Markus. The Kondo Effect in Single Wall Carbon Nanotubes With Ferromagnetic Contacts. Universitatsverlag Regensburg, 2012.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

5

Saito, R., A. Jorio, J. Jiang, K. Sasaki, G. Dresselhaus, and M. S. Dresselhaus. Optical properties of carbon nanotubes and nanographene. Edited by A. V. Narlikar and Y. Y. Fu. Oxford University Press, 2017. http://dx.doi.org/10.1093/oxfordhb/9780199533053.013.1.

Full text

Abstract:

This article examines the optical properties of single-wall carbon nanotubes (SWNTs) and nanographene. It begins with an overview of the shape of graphene and nanotubes, along wit the use of Raman spectroscopy to study the structure and exciton physics of SWNTs. It then considers the basic definition of a carbon nanotube and graphene, focusing on the crystal structure of graphene and the electronic structure of SWNTs, before describing the experimental setup for confocal resonance Raman spectroscopy. It also discusses the process of resonance Raman scattering, double-resonance Raman scattering, and the Raman signals of a SWNT as well as the dispersion behavior of second-order Raman modes, the doping effect on the Kohn anomaly of phonons, and the elastic scattering of electrons and photons. The article concludes with an analysis of excitons in SWNTs and outlines future directions for research.

APA, Harvard, Vancouver, ISO, and other styles

6

Narlikar, A. V., and Y. Y. Fu, eds. Oxford Handbook of Nanoscience and Technology. Oxford University Press, 2017. http://dx.doi.org/10.1093/oxfordhb/9780199533053.001.0001.

Full text

Abstract:

This Handbook presents important developments in the field of nanoscience and technology, focusing on the advances made with a host of nanomaterials including DNA and protein-based nanostructures. Topics include: optical properties of carbon nanotubes and nanographene; defects and disorder in carbon nanotubes; roles of shape and space in electronic properties of carbon nanomaterials; size-dependent phase transitions and phase reversal at the nanoscale; scanning transmission electron microscopy of nanostructures; the use of microspectroscopy to discriminate nanomolecular cellular alterations in biomedical research; holographic laser processing for three-dimensional photonic lattices; and nanoanalysis of materials using near-field Raman spectroscopy. The volume also explores new phenomena in the nanospace of single-wall carbon nanotubes; ZnO wide-bandgap semiconductor nanostructures; selective self-assembly of semi-metal straight and branched nanorods on inert substrates; nanostructured crystals and nanocrystalline zeolites; unusual properties of nanoscale ferroelectrics; structural, electronic, magnetic, and transport properties of carbon-fullerene-based polymers; fabrication and characterization of magnetic nanowires; and properties and potential of protein-DNA conjugates for analytic applications.

APA, Harvard, Vancouver, ISO, and other styles

7

Tsaousidou, M. Thermopower of low-dimensional structures: The effect of electron–phonon coupling. Edited by A. V. Narlikar and Y. Y. Fu. Oxford University Press, 2017. http://dx.doi.org/10.1093/oxfordhb/9780199533053.013.13.

Full text

Abstract:

This article examines the effect of electron-phonon coupling on the thermopower of low-dimensional structures. It begins with a review of the theoretical approaches and the basic concepts regarding phonon drag under different transport regimes in two- and one-dimensional systems. It then considers the thermopower of two-dimensional semiconductor structures, focusing on phonon drag in semi-classical two-dimensional electron gases confined in semiconductor nanostructures. It also analyzes the influence of phonon drag on the thermopower of semiconductor quantum wires and describes the phonon-drag thermopower of doped single-wall carbon nanotubes. The article compares theory and experiment in order to demonstrate the role of phonon-drag and electron-phonon coupling in the thermopower in two and one dimensions.

APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Single-wall carbon nanotubes"

1

Yudasaka, Masako. "Single-Wall Carbon Nanotubes and Single-Wall Carbon Nanohorns." In Perspectives of Fullerene Nanotechnology, 125–29. Dordrecht: Springer Netherlands, 2002. http://dx.doi.org/10.1007/978-94-010-9598-3_11.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Dean, Kenneth A. "Field Emission from Single-Wall Nanotubes." In Carbon Nanotube and Related Field Emitters, 119–42. Weinheim, Germany: Wiley-VCH Verlag GmbH & Co. KGaA, 2010. http://dx.doi.org/10.1002/9783527630615.ch10.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Biercuk, Michael J., Shahal Ilani, Charles M. Marcus, and Paul L. McEuen. "Electrical Transport in Single-Wall Carbon Nanotubes." In Topics in Applied Physics, 455–93. Berlin, Heidelberg: Springer Berlin Heidelberg, 2007. http://dx.doi.org/10.1007/978-3-540-72865-8_15.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Kasuya, Atsuo, Yahachi Saito, Yoshiro Sasaki, Michiko Fukushima, Toshiteru Maeda, Chuji Horie, and Yuichiro Nishina. "Size-dependent Characteristics of Single-wall Carbon Nanotubes." In Mesoscopic Materials and Clusters, 333–35. Berlin, Heidelberg: Springer Berlin Heidelberg, 1999. http://dx.doi.org/10.1007/978-3-662-08674-2_33.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Amara, Hakim, and Christophe Bichara. "Modeling the Growth of Single-Wall Carbon Nanotubes." In Topics in Current Chemistry Collections, 1–23. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-030-12700-8_1.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Iijima, S. "Hybrid structures of fullerenes and single-wall carbon nanotubes." In Springer Proceedings in Physics, 24. Berlin, Heidelberg: Springer Berlin Heidelberg, 2001. http://dx.doi.org/10.1007/978-3-642-59484-7_7.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Hall, Adam R., Johannes M. Keegstra, Matthew C. Duch, Mark C. Hersam, and Cees Dekker. "Measuring Single-Wall Carbon Nanotubes with Solid-State Nanopores." In Methods in Molecular Biology, 227–39. Totowa, NJ: Humana Press, 2012. http://dx.doi.org/10.1007/978-1-61779-773-6_13.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Saito, R., A. R. T. Nugraha, E. H. Hasdeo, N. T. Hung, and W. Izumida. "Electronic and Optical Properties of Single Wall Carbon Nanotubes." In Topics in Current Chemistry Collections, 165–88. Cham: Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-030-12700-8_6.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Arenal, Raul, and Annick Loiseau. "Heteroatomic Single-Wall Nanotubes Made of Boron, Carbon, and Nitrogen." In B-C-N Nanotubes and Related Nanostructures, 45–81. New York, NY: Springer New York, 2009. http://dx.doi.org/10.1007/978-1-4419-0086-9_3.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Liu, Huaping, Takeshi Tanaka, and Hiromichi Kataura. "Industrial Single-Structure Separation of Single-Wall Carbon Nanotubes by Multicolumn Gel Chromatography." In Materials Challenges and Testing for Manufacturing, Mobility, Biomedical Applications and Climate, 49–56. Cham: Springer International Publishing, 2014. http://dx.doi.org/10.1007/978-3-319-11340-1_5.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Single-wall carbon nanotubes"

1

Gao, B. "Lithium storage in single wall carbon nanotubes." In NANONETWORK MATERIALS: Fullerenes, Nanotubes, and Related Systems. AIP, 2001. http://dx.doi.org/10.1063/1.1420064.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Kumar, Vijay. "Structural transformations in single wall carbon nanotube bundles." In NANONETWORK MATERIALS: Fullerenes, Nanotubes, and Related Systems. AIP, 2001. http://dx.doi.org/10.1063/1.1420108.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Pettes, Michael T., and Li Shi. "Thermal Conductance of Individual Single-Wall Carbon Nanotubes." In ASME 2008 3rd Energy Nanotechnology International Conference collocated with the Heat Transfer, Fluids Engineering, and Energy Sustainability Conferences. ASMEDC, 2008. http://dx.doi.org/10.1115/enic2008-53028.

Full text

Abstract:

This work presents an experimental study of phonon transport in individual suspended single-wall carbon nanotubes (SWCNTs). Through the use of a micro fabricated device consisting of two adjacent suspended membranes, each with a platinum resistance heater and thermometer, the thermal conductance of several individual SWCNTs has been directly measured over the temperature range of 100 to 490 K. The effects of Umklapp phonon-phonon scattering remain weak and the thermal conductance remains roughly proportional to the calculated ballistic conductance throughout the temperature range. The macroscopic thermal conductance increases with temperature throughout the temperature range indicating static scattering processes or contact thermal resistance dominate transport in this regime. These results are an order of magnitude lower than the predicted ballistic thermal conductance calculated for a defect-free (18,0) nanotube. The results contrast with thermal conductance measurements reported using a high-bias DC self heating method. The discrepancy is discussed in terms of the differences in the contact thermal resistance, defects, and measurement methods.

APA, Harvard, Vancouver, ISO, and other styles

4

Zhong, Hongliang, and Jennifer R. Lukes. "Thermal Conductivity of Single-Wall Carbon Nanotubes." In ASME 2004 International Mechanical Engineering Congress and Exposition. ASMEDC, 2004. http://dx.doi.org/10.1115/imece2004-61665.

Full text

Abstract:

Despite the significant amount of research on single-wall carbon nanotubes, their thermal conductivity has not been well established. To date only one experimental thermal conductivity measurement has been reported for these molecules around room temperature, with large uncertainty in the thermal conductivity values. Existing theoretical predictions based on molecular dynamics simulation range from several hundred to 6600 W/m-K. In an attempt to clarify the order-of magnitude discrepancy in the literature, this paper utilizes molecular dynamics simulation to systematically examine the thermal conductivity of several (10, 10) single-wall carbon nanotubes as a function of length, temperature, boundary conditions and molecular dynamics simulation methodology. The present results indicate that thermal conductivity ranges from about 30–300 W/m-K depending on the various simulation conditions. The results are unconverged and keep increasing at the longest tube length, 40 nm. Agreement with the majority of literature data is achieved for the tube lengths treated here. Discrepancies in thermal conductivity magnitude with experimental data are primarily attributed to length effects, although simulation methodology, stress, and intermolecular potential may also play a role. Quantum correction of the calculated results reveals thermal conductivity temperature dependence in qualitative agreement with experimental data.

APA, Harvard, Vancouver, ISO, and other styles

5

Pozdnyakov, D. V. "Magnetoresistance of metallic single-wall carbon nanotubes." In 2010 20th International Crimean Conference "Microwave & Telecommunication Technology" (CriMiCo 2010). IEEE, 2010. http://dx.doi.org/10.1109/crmico.2010.5632953.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Alvarez, L., T. Guillard, E. Anglaret, J. L. Sauvajol, P. Bernier, G. Flamant, G. Olalde, et al. "Solar synthesis of single wall carbon nanotubes." In ELECTRONIC PROPERTIES OF NOVEL MATERIALS--SCIENCE AND TECHNOLOGY OF MOLECULAR NANOSTRUCTURES. ASCE, 1999. http://dx.doi.org/10.1063/1.59792.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Kataura, H. "Bundle effects of single-wall carbon nanotubes." In The 14th international winterschool on electronic properties of novel materials - molecular nanostructures. AIP, 2000. http://dx.doi.org/10.1063/1.1342514.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Lindelof, P. E., J. Borggreen, A. Jensen, J. Nygård, and P. R. Poulsen. "Electron Spin in Single Wall Carbon Nanotubes." In Proceedings of the Nobel Jubilee Symposium. CO-PUBLISHED WITH PHYSICA SCRIPTA AND THE ROYAL SWEDISH ACADEMY OF SCIENCES, 2003. http://dx.doi.org/10.1142/9789812791269_0004.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Berliocchi, Marco, Francesca Brunetti, Aldo Di Carlo, Paolo Lugli, Silvia Orlanducci, and Maria Letizia Terranova. "Electrical characterization of single-wall carbon nanotubes." In Microtechnologies for the New Millennium 2003, edited by Robert Vajtai, Xavier Aymerich, Laszlo B. Kish, and Angel Rubio. SPIE, 2003. http://dx.doi.org/10.1117/12.501260.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Elich, Jeff. "Thermionic Properties of Single Wall Carbon Nanotubes." In 1st International Energy Conversion Engineering Conference (IECEC). Reston, Virigina: American Institute of Aeronautics and Astronautics, 2003. http://dx.doi.org/10.2514/6.2003-5955.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Single-wall carbon nanotubes"

1

Holmes, W., J. Hone, P. L. Richards, and A. Zettl. Transmittance of single wall carbon nanotubes. Office of Scientific and Technical Information (OSTI), July 2001. http://dx.doi.org/10.2172/841693.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Tour, James M., and Carter Kittrell. Cloning single wall carbon nanotubes for hydrogen storage. Office of Scientific and Technical Information (OSTI), August 2012. http://dx.doi.org/10.2172/1339999.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Balbuena, Perla B. Final Report “Modeling Catalyzed Growth of Single-Wall Carbon Nanotubes”. Office of Scientific and Technical Information (OSTI), December 2018. http://dx.doi.org/10.2172/1485119.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Vassilev, Vassil M. • Unduloid-Like Equilibrium Shapes of Single-Wall Carbon Nanotubes Under Pressure. GIQ, 2013. http://dx.doi.org/10.7546/giq-14-2013-244-252.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Matteson, Robert C., and Roger M. Crane. Effects of Single Wall Carbon Nanotubes on Interlaminar Shear in GRP Panels. Fort Belvoir, VA: Defense Technical Information Center, April 2004. http://dx.doi.org/10.21236/ada593430.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Keidar, Michael. Mechanism of Synthesis of Ultra-Long Single Wall Carbon Nanotubes in Arc Discharge Plasma. Office of Scientific and Technical Information (OSTI), June 2013. http://dx.doi.org/10.2172/1084387.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Exner, Ginka K., Yordan G. Marinov, and Georgi B. Hadjichristov. Novel Nanocomposites of Single Wall Carbon Nanotubes and Discotic Mesogen with Tris(keto-hydrozone) Core. "Prof. Marin Drinov" Publishing House of Bulgarian Academy of Sciences, September 2020. http://dx.doi.org/10.7546/crabs.2020.09.04.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Kumar, Satish, Han G. Chae, Marilyn Minus, and Asif Rasheed. Stabilization and Carbonization of Gel Spun Polyacrylonitrile/Single Wall Carbon Nanotube Composite Fibers. Fort Belvoir, VA: Defense Technical Information Center, February 2007. http://dx.doi.org/10.21236/ada465660.

Full text

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!