Log in

Relevant bibliographies by topics / Slicer program / Journal articles

To see the other types of publications on this topic, follow the link: Slicer program.

Journal articles on the topic 'Slicer program'

Author: Grafiati

Published: 30 May 2022

Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 journal articles for your research on the topic 'Slicer program.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

Yadavally, Aashish, Yi Li, Shaohua Wang, and Tien N. Nguyen. "A Learning-Based Approach to Static Program Slicing." Proceedings of the ACM on Programming Languages 8, OOPSLA1 (2024): 83–109. http://dx.doi.org/10.1145/3649814.

Full text

Abstract:

Traditional program slicing techniques are crucial for early bug detection and manual/automated debugging of online code snippets. Nevertheless, their inability to handle incomplete code hinders their real-world applicability in such scenarios. To overcome these challenges, we present NS-Slicer, a novel learning-based approach that predicts static program slices for both complete and partial code Our tool leverages a pre-trained language model to exploit its understanding of fine-grained variable-statement dependencies within source code. With this knowledge, given a variable at a specific loc

APA, Harvard, Vancouver, ISO, and other styles

2

Pérez, Sergio, Josep Silva, and Salvador Tamarit. "Automatic Testing of Program Slicers." Scientific Programming 2019 (February 25, 2019): 1–15. http://dx.doi.org/10.1155/2019/4108652.

Full text

Abstract:

Program slicing is a technique to extract the part of a program (the slice) that influences or is influenced by a set of variables at a given point (the slicing criterion). Computing minimal slices is undecidable in the general case, and obtaining the minimal slice of a given program is normally computationally prohibitive even for very small programs. Therefore, no matter what program slicer we use, in general, we cannot be sure that our slices are minimal. This is probably the fundamental reason why no benchmark collection of minimal program slices exists. In this work, we present a method t

APA, Harvard, Vancouver, ISO, and other styles

3

Shankar, Shreya, Stephen Macke, Sarah Chasins, Andrew Head, and Aditya Parameswaran. "Bolt-on, Compact, and Rapid Program Slicing for Notebooks." Proceedings of the VLDB Endowment 15, no. 13 (2022): 4038–47. http://dx.doi.org/10.14778/3565838.3565855.

Full text

Abstract:

Computational notebooks are commonly used for iterative workflows, such as in exploratory data analysis. This process lends itself to the accumulation of old code and hidden state, making it hard for users to reason about the lineage of, e.g., plots depicting insights or trained machine learning models. One way to reason about code used to generate various notebook data artifacts is to compute a program slice , but traditional static approaches to slicing can be both inaccurate (failing to contain relevant code for artifacts) and conservative (containing unnecessary code for an artifacts). We

APA, Harvard, Vancouver, ISO, and other styles

4

Yadavally, Aashish, Yi Li, and Tien N. Nguyen. "Predictive Program Slicing via Execution Knowledge-Guided Dynamic Dependence Learning." Proceedings of the ACM on Software Engineering 1, FSE (2024): 271–92. http://dx.doi.org/10.1145/3643739.

Full text

Abstract:

Program slicing, the process of extracting program statements that influence values at a designated location (known as the slicing criterion), is helpful in both manual and automated debugging. However, such slicing techniques prove ineffective in scenarios where executing specific inputs is prohibitively expensive, or even impossible, as with partial code. In this paper, we introduce ND-Slicer, a predictive slicing methodology that caters to specific executions based on a particular input, overcoming the need for actual execution. We enable such a process by leveraging execution-aware pre-tra

APA, Harvard, Vancouver, ISO, and other styles

5

Nguyen, Loi Ngo Duc, Tahiatul Islam, Theron Wang, Sam Lenz, and Martin Kellogg. "Static Program Reduction via Type-Directed Slicing." Proceedings of the ACM on Software Engineering 2, ISSTA (2025): 2068–90. https://doi.org/10.1145/3728968.

Full text

Abstract:

A traditional program slicer constructs a smaller variant of a target program that computes the same result with respect to some target variable—that is, program slicing preserves the original program’s run-time semantics . We propose type-directed slicing , which constructs a smaller program that guarantees that a typechecker will produce the same result on the sliced program when considering only a target program location—that is, a type-directed slicer preserves the target program’s compile-time semantics , from the view of a specific typechecker, with respect to some location. Type-directe

APA, Harvard, Vancouver, ISO, and other styles

6

Zhang, Yingzhou, Jose Emilio Labra Gayo, and Agustín Cernuda del Río. "A monadic program slicer." ACM SIGPLAN Notices 41, no. 5 (2006): 30–38. http://dx.doi.org/10.1145/1149982.1149986.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Sward, Ricky E., and Leemon C. Baird. "Optimizing the SPARK program slicer." ACM SIGAda Ada Letters XXV, no. 4 (2005): 17–22. http://dx.doi.org/10.1145/1104011.1103849.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Fox, Chris, Sebastian Danicic, Mark Harman, and Robert M. Hierons. "CONSIT: a fully automated conditioned program slicer." Software: Practice and Experience 34, no. 1 (2003): 15–46. http://dx.doi.org/10.1002/spe.556.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Kholodilov, A. A., E. V. Faleeva, and M. V. Kholodilova. "Investigation of the Mathematical and Software Implementation of Triangulation Mesh Generation Algorithms in Relation to the Creation of a Slicer Program." Journal of Physics: Conference Series 2096, no. 1 (2021): 012177. http://dx.doi.org/10.1088/1742-6596/2096/1/012177.

Full text

Abstract:

Abstract The article discusses an algorithmic method for increasing the strength characteristics of products produced by additive manufacturing technologies through thickening the internal grid structure of filling the model when transferring to the control code during the operation of the slicer program. It shows the internal filling using the Voronoi grid and the "Exhaustion Algorithm" for the implementation of the internal filling of the threedimensional model in the process of the slicer program.

APA, Harvard, Vancouver, ISO, and other styles

10

Shim, Bo Seok, and Jong-Uk Hou. "Improving Estimation of Layer Thickness and Identification of Slicer for 3D Printing Forensics." Sensors 23, no. 19 (2023): 8250. http://dx.doi.org/10.3390/s23198250.

Full text

Abstract:

This study emphasizes the significance of estimating the layer thickness and identifying slicer programs in the realm of 3D printing forensics. With the progress in 3D printing technology, precise estimation of the layer thickness has become crucial. However, previous research on layer thickness estimation has mainly treated the problem as a classification task, which is inadequate for continuous layer thickness parameters. Furthermore, previous studies have concentrated on hardware-based printer identification, but the identification of slicer programs through 3D objects is a vital aspect of

APA, Harvard, Vancouver, ISO, and other styles

11

Katti, Amogh, and Sujatha Terdal. "Program Slicing for Refactoring: Static Slicer using Dynamic Analyser." International Journal of Computer Applications 9, no. 6 (2010): 36–43. http://dx.doi.org/10.5120/1387-1869.

Full text

APA, Harvard, Vancouver, ISO, and other styles

12

Paola, Emilia Iñiguez Espinoza, Renato Pineda Paredes Johnny, and Ismael Cordero Beltran Mauricio. "Bolton analysis in a specific program for orthodontics: NemoCast in comparison with free access programs: Meshmixer and 3d slicer." World Journal of Advanced Research and Reviews 17, no. 1 (2023): 686–98. https://doi.org/10.5281/zenodo.8080605.

Full text

Abstract:

<strong>Objective:</strong> To analyze and compare the results obtained from the Bolton Total and Partial analysis, in the specific orthodontic software in comparison with the results obtained from the open access software. <strong>Materials and Methods:</strong> Data from 49 people who met the exclusion and inclusion criteria were evaluated. The mesiodistal measurements of the dental pieces of the participants were taken in the following programs: NemoCast, MeshMixer and 3D Slicer, after which the calculation of the Bolton Total and Bolton Partial analysis was performed, the data we

APA, Harvard, Vancouver, ISO, and other styles

13

Paola Emilia Iñiguez Espinoza, Johnny Renato Pineda Paredes, and Mauricio Ismael Cordero Beltran. "Bolton analysis in a specific program for orthodontics: NemoCast in comparison with free access programs: Meshmixer and 3d slicer." World Journal of Advanced Research and Reviews 17, no. 1 (2023): 686–98. http://dx.doi.org/10.30574/wjarr.2023.17.1.0120.

Full text

Abstract:

Objective: To analyze and compare the results obtained from the Bolton Total and Partial analysis, in the specific orthodontic software in comparison with the results obtained from the open access software. Materials and Methods: Data from 49 people who met the exclusion and inclusion criteria were evaluated. The mesiodistal measurements of the dental pieces of the participants were taken in the following programs: NemoCast, MeshMixer and 3D Slicer, after which the calculation of the Bolton Total and Bolton Partial analysis was performed, the data were entered into a database, and then compara

APA, Harvard, Vancouver, ISO, and other styles

14

Balanovskii, A. E., V. Yu Konyukhov, and R. R. Khakimov. "Technology of robotic additive manufacturing of products of complex geometric shape made of metal." Ferrous Metallurgy. Bulletin of Scientific , Technical and Economic Information 81, no. 1 (2025): 54–60. https://doi.org/10.32339/0135-5910-2025-1-54-60.

Full text

Abstract:

Additive manufacturing or 3D printing is replacing traditional subtractive manufacturing, where parts are manufactured by sequentially removing parts of the workpiece. In 3D printing, the material is added in layers, which makes it possible to produce parts of complex geometric shapes from expensive metals with higher productivity and economic efficiency. In order to carry out 3D printing at the industrial level, it is necessary to combine robotics with 3D printing software. This article presents the results of adaptation and programming of an industrial robot for 3D printing. Since there is c

APA, Harvard, Vancouver, ISO, and other styles

15

Muntasir, Muntasir, Sigit Purnawan, and Mustakim Syahdan. "Penerapan Alat Peniris Serbaguna Model Silinder Sistem Sentrifuse Untuk Meningkatkan Mutu Dan Higienis Produk Kerupuk Jagung Kelimutu Sikumana Kota Kupang." JATI EMAS (Jurnal Aplikasi Teknik dan Pengabdian Masyarakat) 2, no. 1 (2018): 50. http://dx.doi.org/10.36339/je.v2i1.110.

Full text

Abstract:

Science for Society in Small Industries of Corn Crackers Kelimutu Sikumana Kota Kupang in the form ofapplication of slicer has been implemented, one of the problems in the production of Kelimutu corn cracker is still a lot ofoil in frying product which only drained on simple sieve and placed some time above cardboard that can cause loweringquality and low hygiene, so it is necessary to do the reduction of frying oil products corn chips cracker. In order toincrease the added value and selling value of the product, it is necessary to synergy between Universities and Partners inthe form of scienc

APA, Harvard, Vancouver, ISO, and other styles

16

Celik, Nihal Gurlek, Saadet Erdem, and Mehmet Kocak. "Volumetric Analysis of Carpal Bones by Sex with 3D Slicer Software Program." International Journal of Morphology 42, no. 4 (2024): 1005–10. http://dx.doi.org/10.4067/s0717-95022024000401005.

Full text

APA, Harvard, Vancouver, ISO, and other styles

17

GOMEZ ALONSO, JOSE LUIS, ALEXANDRA ALLUE SALVADOR, ISABEL DE MARCO RODRIGUEZ, JONE RETOLAZA GAVIÑA, and GORKA DIEZ BARCENILLA. "INFLUENCE OF SLICER SOFTWARE USED WITH 3D PRINTING FILAMENT EXTRUSION TECHNOLOGY ON PROPERTIES OF PRINTED PARTS WITH SHORT FIBER REINFORCED THERMOPLASTIC COMPOSITE." DYNA 97, no. 3 (2022): 295–300. http://dx.doi.org/10.6036/10285.

Full text

Abstract:

3D printing with filament extrusion technology is a process in which the thermoplastic molten material is sequentially accumulated layer by layer on a construction platform. 3D printers use a slicer software that converts 3D digital models into printing instructions. The software calculates the trajectory of the extruder within the printer, from three-dimensional mesh-based models. The input of the lamination software is a “.stl” file and the output is a “.gcode” file. For each layer, the lamination program generates the path that the printer extruder will travel, this could determine if a par

APA, Harvard, Vancouver, ISO, and other styles

18

Levine, Lance, and Marc Levine. "DRRGenerator: A Three-dimensional Slicer Extension for the Rapid and Easy Development of Digitally Reconstructed Radiographs." Journal of Clinical Imaging Science 10 (October 29, 2020): 69. http://dx.doi.org/10.25259/jcis_105_2020.

Full text

Abstract:

As the interest in image-guided medical interventions has increased, so too has the necessity for open-source software tools to provide the required capabilities without exorbitant costs. A common issue encountered in these procedures is the need to compare computed tomography (CT) data with X-ray data, for example, to compare pre-operative CT imaging with intraoperative X-rays. A software approach to solve this dilemma is the production of digitally reconstructed radiographs (DRRs) which computationally simulate an X-ray-type image from CT data. The resultant image can be easily compared to a

APA, Harvard, Vancouver, ISO, and other styles

19

Chung, Sungmin, and Jung-sik Jang. ""A Study on Interface Usability of Slicer Program ; Focused on Personal FDM Printer"." Journal of Industrial Design Studies 44 (June 30, 2018): 75–84. http://dx.doi.org/10.37254/ids.2018.06.44.07.75.

Full text

APA, Harvard, Vancouver, ISO, and other styles

20

Goncharov, V. D., E. G. Evdakova, and R. V. Yashkardin. "Creation of the solid brain model." LETI Transactions on Electrical Engineering & Computer Science 15, no. 1 (2022): 55–62. http://dx.doi.org/10.32603/2071-8985-2022-15-1-55-62.

Full text

Abstract:

The work is devoted to the description of algorithms for the mathematical processing of MRI images of the human brain. The results of mathematical processing are used to create a mathematical model describing the electromagnetic processes occurring in the brain when exposed to transcranial magnetic stimulation. Transcranial magnetic stimulation is used to treat various neurodegenerative diseases. For the development of models, 3D Slicer Simple Data images were selected, which are freely available in DICOM format. For processing and selection of a three-dimensional surface, step-by-step image p

APA, Harvard, Vancouver, ISO, and other styles

21

YANG, JI-TZAY, FENG-JIAN WANG, WILLIAM C. CHU, and CHUNG-HUA HU. "CONSTRUCTING FLOW-BASED TOOLS WITH GENERATIVE AND COMPOSITIONAL TECHNIQUES." International Journal of Software Engineering and Knowledge Engineering 10, no. 02 (2000): 203–26. http://dx.doi.org/10.1142/s0218194000000122.

Full text

Abstract:

In this paper, a model called object-oriented attribute grammar (OOAG), which combines both compositional and generative techniques, is presented to effectively construct flow-based tools that deal with fine-grained language semantics as well as a mass of graphics-drawing activities. OOAG, which consists of two interrelated parts: a model-view-shape (MVS) class framework and an AG++, an object-oriented extension to traditional AGs, is intended to preserve both advantages introduced by respective OO and AG models, such as rapid prototyping, reusability, extensibility, incrementality, and applic

APA, Harvard, Vancouver, ISO, and other styles

22

Jerónimo Montes, José Antonio, Angélica Rosalva Martínez Rodríguez, and Juan Ignacio Cruz. "3D biomodels to integrate an imaging diagnosis as an aid in learning clinical diagnostics in dentistry." Odontologia (Montevideo) 3 (January 1, 2025): 201. https://doi.org/10.62486/agodonto2025201.

Full text

Abstract:

The work presented here corresponds to the purpose of the PAPIT Project IN306823 Emerging pedagogies and open educational movement, particularly in digital and 3D printed format; applied in learning activities in Health Sciences, in dentistry. In the salud area, the challenge is to attract the attention and interest of students to learn anatomy, pathology and promote the integration of knowledge of the basic areas referred to above in the process of identifying lesions, in that formative experience focused on the use of radiographic images of patients. The learning experiences that are shared

APA, Harvard, Vancouver, ISO, and other styles

23

Yuliati, Yuliati, Hadi Santosa, and Hartono Pranjoto. "Teknologi Tepat Guna Alat Plate Slicer Sebagai Upaya Peningkatan Kecepatan Dan Kapasitas Produksi Pengrajin Kerupuk Di Desa Jaddih Kecamatan Socah Kabupaten Bangkalan Madura." Prosiding Konferensi Nasional Pengabdian Kepada Masyarakat dan Corporate Social Responsibility (PKM-CSR) 2 (December 15, 2019): 332–39. http://dx.doi.org/10.37695/pkmcsr.v2i0.550.

Full text

Abstract:

Pengrajin kerupuk banyak dijumpai di Desa Jaddih Kecamatan Socah Kabupaten Bangkalan Madura. Namun sebagian besar peralatan dan proses produksi yang mereka lakukan masih sangat sederhana dan konvensional, khususnya pada proses pengirisan adonan kerupuk ini masih terdapat banyak kendala dan kekurangan. Proses pengirisan adonan kerupuk masih dilakukan dengan pisau dapur biasa secara manual (di dendeng tipis) sehingga pengirisan gelondongan adonan kerupuk memerlukan waktu yang cukup lama (5 kg/jam) dengan rata rata produksi 50 kg/hari serta cukup sulit untuk mendapatkan ketebalan yang sama dalam

APA, Harvard, Vancouver, ISO, and other styles

24

Burg-Personnaz, Juliette, Martin Zöllner, Sven Reese, Andrea Meyer-Lindenberg, and Andreas Brühschwein. "3D Slicer open-source software plug-in for vector-based angle calculation of canine hind limb alignment in computed tomographic images." PLOS ONE 19, no. 3 (2024): e0283823. http://dx.doi.org/10.1371/journal.pone.0283823.

Full text

Abstract:

Background Severe and complex angular limb deformities in dogs require accurate morphological assessment using diagnostic imaging to achieve successful orthopedic surgery. Computed tomography (CT) is commonly used to overcome projection errors in two-dimensional angular measurements of dog hindlimb alignment. Three-dimensional volume rendering (VR) techniques permit virtual positioning and variable projection, but the final CT-image that defines the projection plane for angular measurements remains two-dimensional. Objective We wanted to develop a true three-dimensional open-source technique t

APA, Harvard, Vancouver, ISO, and other styles

25

Oi, Yuta, Ichita Taniyama, Haruki Minamoto, et al. "10093- MNG-4 PREDICTION MODEL FOR TUMOR GROWTH BY QUANTITATIVE IMAGE ANALYSIS FOR INCIDENTALLY DISCOVERED MENINGIOMAS." Neuro-Oncology Advances 6, Supplement_4 (2024): iv23. http://dx.doi.org/10.1093/noajnl/vdae173.090.

Full text

Abstract:

Abstract PURPOSE Most factors identified in prior studies on meningioma enlargement are qualitative, with limited quantitative evaluation. Predicting future tumor growth from initial imaging of incidentally discovered meningiomas could inform treatment decisions. This study quantitatively evaluates imaging data at diagnosis to identify characteristics associated with tumor enlargement. METHODS We compared MRI T2 features from the initial imaging of 10 patients in a clearly enlarged group with 10 in a non-enlarged group. Using 3D Slicer and Slicer Radiomics plug-ins, we created a program to set

APA, Harvard, Vancouver, ISO, and other styles

26

Kusasih, Ida Ayu Kade Rachmawati, and Budi Istiyanto. "Peningkatan Pendapatan Melalui Pengelolaan Bernilai Tambah pada Usaha Rumahan." JPPM: JURNAL PENGABDIAN DAN PEMBERDAYAAN MASYARAKAT 1, no. 2 (2017): 117. http://dx.doi.org/10.30595/jppm.v1i2.1836.

Full text

Abstract:

The role of a wife has begun to shift into an entrepreneur now. This starts with a home-based business that was initially done to fill the spare time after the housekeeping duty were completed. But in managing the business they are still simple oriented just to fill the time, so that this business is not able to develop properly. This dedication seeks to empower the home-based business to be able to have added value that previously only runs with many limitations. Implementation of community service program on partner 1 (Arum Snack) by giving peanut slicer to save time to make sliced peanut so

APA, Harvard, Vancouver, ISO, and other styles

27

Shi, Hailiang, Yang Li, Yinzhan Wang, et al. "The preoperative evaluation value of 3D-slicer program before microsurgical vascular decompression in patients with hemifacial spasm." Clinical Neurology and Neurosurgery 217 (June 2022): 107241. http://dx.doi.org/10.1016/j.clineuro.2022.107241.

Full text

APA, Harvard, Vancouver, ISO, and other styles

28

Pani, Santosh Kumar, and G. B. Mund. "Property Based Dynamic Slicing of Object Oriented Programs." International Journal of Software Engineering and Technologies (IJSET) 1, no. 2 (2016): 69. http://dx.doi.org/10.11591/ijset.v1i2.4570.

Full text

Abstract:

Slicing is used for program analysis. It the process of extracting the statements of a program that are relevant to a given computation. Static slicing generates slices for all possible execution of a program helping in program understanding, verification, maintenance and testing. Dynamic slices are smaller in size as they extract slices for a given execution of a program and helps in interactive applications like debugging and testing. With the wide spread use of object oriented software, there are many papers on Dynamic Slicing of object oriented programs but few papers only address in detai

APA, Harvard, Vancouver, ISO, and other styles

29

Seddighi, Amir Saied, Hesam Rahimi Baqdashti, Afsoun Seddighi, et al. "Developing a 3D Reconstruction System for Surgical Planning in Neurovascular Surgery." Iranian Journal of Neurosurgery 7, no. 4 (2021): 191–96. http://dx.doi.org/10.32598/irjns.7.4.4.

Full text

Abstract:

Background and Aim: Neurovascular lesions can cause death or disability. Some of them are operable, but surgical approaches are complicated, and proper access to these lesions is crucial. A few of these surgeries occur during the residency educational program, and residents' experience in operating these lesions may be quite inadequate. Using new technologies like 3D-reconstruction of vascular lesion images may result in better training and improve residents' knowledge and understanding of these operations. Methods and Materials/Patients: Four senior neurosurgery residents were enrolled in thi

APA, Harvard, Vancouver, ISO, and other styles

30

Lazarev, Yuriy, Oleg Krotov, Svetlana Belyaeva, and Marina Petrochenko. "3D environmentally friendly concrete printing model preparation." E3S Web of Conferences 175 (2020): 11024. http://dx.doi.org/10.1051/e3sconf/202017511024.

Full text

Abstract:

This article considers ways of the construction printing of models for agriculture, road, civil and also industrial construction using concrete mixtures. For acquaintance with technology, the architectural element with width of layer of 4 cm and 8 cm all model high has been taken with height of one layer of 2 cm. This model has been prepared with use of two packages of the program complexes having different functionality, namely AutoCAD+SheetCAM+Mach3, the second Sketch-Up+Simplify3D. Each software package was used for design of model in 2D or 3D perspectives, division of model into layers, id

APA, Harvard, Vancouver, ISO, and other styles

31

Marbun, Frince, and Richard A. M. Napitupulu. "Desain dan Pembuatan Prototype Piston Honda MEGAPRO FI Menggunakan 3D Printing." SPROCKET JOURNAL OF MECHANICAL ENGINEERING 1, no. 2 (2020): 81–91. http://dx.doi.org/10.36655/sprocket.v1i2.184.

Full text

Abstract:

3D printing technology has great potential in today's manufacturing world, one of its uses is in making miniatures or prototypes of a product such as a piston. One of the most famous and inexpensive 3D printing (additive manufacturing) technologies is Fused Deposition Modeling (FDM), the principle FDM works by thermoplastic extrusion through a hot nozzle at melting temperature then the product is made layer by layer. The two most commonly used materials are ABS and PLA so it is very important to know the accuracy of product dimensions. FDM 3D Printing Technology is able to make duplicate produ

APA, Harvard, Vancouver, ISO, and other styles

32

Siahaan, Sabda Dian Nurani, Lenti Susanna Saragih, Siti Ulgari, and Haryani Pratiwi Sitompul. "Penerapan Alat Slicer Nanas Sebagai Teknologi Tepat Guna Produksi Keripik Nanas dan Perhitungan Harga Pokok Produksi Untuk Peningkatan Produktivitas Usaha." Jurnal Pengabdian Masyarakat Formosa 2, no. 4 (2023): 251–64. http://dx.doi.org/10.55927/jpmf.v2i4.5755.

Full text

Abstract:

Mitra pada kegiatan Program Kemitraan Masyarakat (PKM) ini adalah Kelompok Maju Tani yang berlokasi di Desa Boangmanalu Kecamatan Salak Kabupaten Pakpak Bharat. Permasalahan yang ditemukan pada mitra adalah dibidang produksi yaitu ukuran keripik nanas yang tidak beraturan dan mitra kurang memahami cara penetapan harga jual produk. Pembenahan terhadap usaha keripik nanas ini perlu dilakukan untuk meningkatkan dan menjaga keberlangsungan usaha. Penanganan terhadap masalah ini juga menjadi penting karena kelompok Maju Tani adalah pengusaha-pengusaha berbasis petani yang perlu dibekali ilmu berbis

APA, Harvard, Vancouver, ISO, and other styles

33

Andrés, Felipe Botero-Ospina, Isabel Duque-Vallejo Sara, Fredy Ochoa-Gómez John, and Mauricio Hernández-Valdivieso Alher. "Touchless control module for diagnostic images at the surgery room using the Leap Motion system and 3D Slicer Software." Touchless control module for diagnostic images at the surgery room using the Leap Motion system and 3D Slicer Software, no. 82 (March 16, 2017): 40–46. https://doi.org/10.17533/udea.redin.n82a05.

Full text

Abstract:

During surgical procedures, it is important that the personnel (surgeon, residents, or assistants) interact with the patient avoiding any physical contact with equipment and materials that might have not been appropriately sterilized. This is done in  order to prevent patient’s infections and complications after surgery. With the increased availability of diagnostic images, this technology has become indispensable in operating rooms but to maintain asepsis control of computer equipment on which the visualization programs are executed is not always possible, hindering access to perso

APA, Harvard, Vancouver, ISO, and other styles

34

LIPCSEI, LAUREN E., LAURA G. BROWN, E. RICKAMER HOOVER, et al. "Retail Deli Slicer Inspection Practices: An EHS-Net Study." Journal of Food Protection 81, no. 5 (2018): 799–805. http://dx.doi.org/10.4315/0362-028x.jfp-17-407.

Full text

Abstract:

ABSTRACT The Centers for Disease Control and Prevention (CDC) estimates that 3,000 people die in the United States each year from foodborne illness, and Listeria monocytogenes causes the third highest number of deaths. Risk assessment data indicate that L. monocytogenes contamination of particularly delicatessen meats sliced at retail is a significant contributor to human listeriosis. Mechanical deli slicers are a major source of L. monocytogenes cross-contamination and growth. In an attempt to prevent pathogen cross-contamination and growth, the U.S. Food and Drug Administration (FDA) created

APA, Harvard, Vancouver, ISO, and other styles

35

Harih, Gregor, and Andrej Čretnik. "Open-Source Software in Medical Imaging: Case-Based Study with Interdisciplinary Innovative Product Design." Acta Medico-Biotechnica 5, no. 1 (2021): 61–72. http://dx.doi.org/10.18690/actabiomed.68.

Full text

Abstract:

Purpose: Recently, comprehensive open-source software (OSS) solutions for medical images have been developed. They offer powerful tools for the management, visualization, storage and analysis of images. The purpose of the present study was to present the features and use of OSS in comparison with commercial software solutions when evaluating medical images. Methods: A case study of the development of a tool handle of optimal size and shape using the free OSS “3D Slicer” is presented. Many authors recommend cylindrical-shaped handles to increase comfort, performance and to avoid cumulativ

APA, Harvard, Vancouver, ISO, and other styles

36

Awad, Khalil, Mohammad Abdallah, Abdelfatah Tamimi, Amir Ngah, and Hanadi Tamimi. "A proposed forward clause slicing application." Indonesian Journal of Electrical Engineering and Computer Science 13, no. 1 (2019): 1–6. https://doi.org/10.11591/ijeecs.v13.i1.pp1-6.

Full text

Abstract:

The Clause slicing technique is static slicing techniques which also have forward and backward slicing methods. The Clause slice criteria are the clause and the clause number. In this paper, we have discussed the Clauser tool the forward clause slicing tool introduce some improvements to it. The Clauser mechanism divides the program code statement into clauses, depending on clause slicing rules, identifies the variables and built-in functions, then slices the clauses regarding the slice criterion that was entered by the user. Comparing to other static slicing techniques the clause slicing is m

APA, Harvard, Vancouver, ISO, and other styles

37

Lysenko, A. V., A. Y. Razumova, A. I. Yaremenko, V. M. Ivanov, S. V. Strelkov, and A. A. Grigoriev. "A modern approach to planning and surgical removal of a foreign body from a maxillary sinus: a clinical case." Parodontologiya 27, no. 3 (2022): 258–62. http://dx.doi.org/10.33925/1683-3759-2022-27-3-258-262.

Full text

Abstract:

Relevance. If a foreign body is present in a maxillary sinus, it should be surgically removed. Endoscopic and radical surgery are the main methods. Clinician’s subjective feelings determine the surgical access, which can cause complications. Therefore, the search for new methods of planning and visualizing the operation stages remains relevant.Materials and methods. Before the operation, the patient had a cone-beam computed tomography in a marker holder frame. The 3D slicer program allowed the segmentation of the foreign body and surrounding anatomical features. A marker, fixed on the patient'

APA, Harvard, Vancouver, ISO, and other styles

38

Ueng, Shyh-Kuang, Ya-Fang Hsieh, and Yu-Chia Kao. "A Voxel-Based Watermarking Scheme for Additive Manufacturing." Applied Sciences 11, no. 19 (2021): 9177. http://dx.doi.org/10.3390/app11199177.

Full text

Abstract:

Digital and analog contents, generated in additive manufacturing (AM) processes, may be illegally modified, distributed, and reproduced. In this article, we propose a watermarking scheme to enhance the security of AM. Compared with conventional watermarking methods, our algorithm possesses the following advantages. First, it protects geometric models and printed parts as well as G-code programs. Secondly, it embeds watermarks into both polygonal and volumetric models. Thirdly, our method is capable of creating watermarks inside the interiors and on the surfaces of complex models. Fourth, the w

APA, Harvard, Vancouver, ISO, and other styles

39

Trnka, Filip, Hana Schmirlerová, Martin Májovský, David Netuka, and Michal Schmirler. "Preparation of a Real Model of Nasal Cavities from Computed Tomography for Numerical Simulation." MATEC Web of Conferences 369 (2022): 01005. http://dx.doi.org/10.1051/matecconf/202236901005.

Full text

Abstract:

With improves in computing hardware and CFD methods, it is possible to work with more complex geometries. The aim of this study is to describe the preparation and creation of a model from CT scans for a numerical study of air flow into the nasal cavities. Research background: The influence of pituitary tumor surgery on the change of geometric proportions of the nasal cavity is investigated in cooperation with the Neurosurgical Department. Purpose of the article: In pituitary tumor surgery, the nasal cavity is used as an access route to the Sella turcica where the pituitary gland is located. Ge

APA, Harvard, Vancouver, ISO, and other styles

40

LR, García-Valadez, Espinoza-Gutiérrez A, Rivas-Montero JA, et al. "3D radial fracture printing; a pilot study in the Instituto Nacional de Rehabilitación." Revista de Sanidad Militar 71, no. 4 (2017): 366–73. http://dx.doi.org/10.56443/rsm.v71i4.114.

Full text

Abstract:

BACKGROUND: Although it has shown multiple benefits in preoperative fracture planning, 3D impressions have not been routinely implemented due to difficult access. MATERIAL AND METHODS: A pilot study was conducted with 10 patients with a diagnosis of distal radius fracture and need for surgical management. Patients were evaluated by radiography, tomography with 3D reconstruction and stereolithography prior to their surgical management. The editing of TAC images was done using the 3D SLICER® program for printing on thermoplastic material and finally a questionnaire of satisfaction was made to do

APA, Harvard, Vancouver, ISO, and other styles

41

K N, Chethan, Afiya Eram, Nisha Shetty, Divya D. Shetty, Mohan Futane, and Laxmikant G. Keni. "Evaluating Angled Abutments: Three-Dimensional Finite Element Stress Analysis of Anterior Maxillary Implants." Prosthesis 6, no. 2 (2024): 315–28. http://dx.doi.org/10.3390/prosthesis6020024.

Full text

Abstract:

Restorative dentistry is the repairing of damaged teeth and restoring oral health and function. Dental implants are typically placed within the cortical bone of the jaw to provide stability and support for prosthetic restorations. The successful restoration of complex anatomical features of the maxillary anterior is difficult for prosthodontists. Using a 3D slicer, CT scan images were used to create a detailed three-dimensional model of the maxilla bone. This study utilizes ANSYS Workbench, a finite element software program, to analyze the abutment angles, ranging from 0° to 25°, and the impac

APA, Harvard, Vancouver, ISO, and other styles

42

Rasheed, Khawla, Auns Al-Neami, and Haider Abbas. "Systematic Review of Image Segmentation Programs in Craniomaxillofacial Surgery." Al-Khwarizmi Engineering Journal 21, no. 2 (2025): 12–22. https://doi.org/10.22153/kej.2025.11.001.

Full text

Abstract:

Image segmentation has a significant role in the virtual planning, execution, and evaluation of craniomaxillofacial (CMF) surgical procedures. This systematic review aims to evaluate and compare the image segmentation programs frequently used in the field of CMF surgery. A precise search strategy was employed to recognise suitable studies across several databases, using specific inclusion criteria and keywords. Various image segmentation programs that use different techniques, including thresholding, edge-based methods, region-based methods and machine learning-based methods, were investigated

APA, Harvard, Vancouver, ISO, and other styles

43

SUKHOVA, A. A., S. M. SVERCHKOV, and A. A. AZANOVA. "THE USE OF ADDITIVE TECHNOLOGIES IN THE DESIGN AND MANUFACTURE OF FASHION INDUSTRY PRODUCTS." Herald of Technological University 27, no. 3 (2024): 105–9. http://dx.doi.org/10.55421/1998-7072_2024_27_3_105.

Full text

Abstract:

The article presents the results of the application of additive technologies in the manufacture of fashion industry products. The history of the emergence and development of 3D printing, the directions of using 3D technologies in the fashion industry are briefly reviewed. The technical characteristics of materials for 3D printing of clothing and accessories are analyzed and presented. The process of creating a product using additive technologies, consisting of several stages, is considered. Developed in the AutoCAD computer-aided design system and manufactured several 3D models of modular elem

APA, Harvard, Vancouver, ISO, and other styles

44

DANICIC, SEBASTIAN, ROBERT M. HIERONS, and MICHAEL R. LAURENCE. "On the computational complexity of dynamic slicing problems for program schemas." Mathematical Structures in Computer Science 21, no. 6 (2011): 1339–62. http://dx.doi.org/10.1017/s0960129511000223.

Full text

Abstract:

Given a program, a quotient can be obtained from it by deleting zero or more statements. The field of program slicing is concerned with computing a quotient of a program that preserves part of the behaviour of the original program. All program slicing algorithms take account of the structural properties of a program, such as control dependence and data dependence, rather than the semantics of its functions and predicates, and thus work, in effect, with program schemas. The dynamic slicing criterion of Korel and Laski requires only that program behaviour is preserved in cases where the original

APA, Harvard, Vancouver, ISO, and other styles

45

Ekwonwune, Emmanuel Nwabueze, and Egwuonwu Deborah I. "Extracting Business Rule from existing COBOL programs for Redevelopment." International Journal of Engineering and Computer Science 8, no. 05 (2019): 24621–28. http://dx.doi.org/10.18535/ijecs/v8i05.4317.

Full text

Abstract:

The paper describes an industrial business study carried out to regain the business knowledge embedded in a legacy COBOL application. The aim of this work was to extract out the information required to re- implement the Legacy programs in a new client/server environment. The progress solution is in four step. Firstly, the programs were restructured, secondly the programs were sliced into business logic modules, third the business modules were subjected to a multi view analysis and finally the views were integrated into a unified documentation describing the data, decision and procedural flow o

APA, Harvard, Vancouver, ISO, and other styles

46

Fayad, Abdulhalim, and Tibor Cinkler. "Optimal Slicing of mmWave Micro Base Stations for 5G and Beyond." Journal of Networking and Network Applications 3, no. 3 (2023): 99–108. http://dx.doi.org/10.33969/j-nana.2023.030301.

Full text

Abstract:

5G and beyond 5G mobile networks are expected to cater to diverse needs by efficiently allocating network resources based on demand. Network slicing is a fundamental approach that involves segregating and allocating network resources distinctly to a group of users based on their individual needs, and it is widely recognized as an essential concept that caters to various requirements. Allocating such slices will encounter conflicting requests, and effectively implementing network slicing presents multiple challenges. Effective network slicing necessitates efficient management of priority levels

APA, Harvard, Vancouver, ISO, and other styles

47

Han, Yi, Chu Na Wu, and Kang Zhao. "Research on Multi-Thread Schedule Algorithm of the Adjusted Pressure Casting Control System." Advanced Materials Research 462 (February 2012): 246–51. http://dx.doi.org/10.4028/www.scientific.net/amr.462.246.

Full text

Abstract:

Research and analyze the multi-thread schedule methods of the adjusted pressure casting control system deeply. Present an analysis method of related slice graphs based on the code slice and a theory of code subdivision based on the slice granularity and time slice. Then strictly divide the program of control system based on the time slice and obtain the strategies of event driven schedule and time slice schedule by analyzing the casting system. Subsequently, subdivide and recombine the multi-thread program slices based on the priority of the schedule strategies in control system. The control s

APA, Harvard, Vancouver, ISO, and other styles

48

Dyah Susanti, Herdiana. "ANALISA KELAYAKAN INVESTASI PERBAIKAN SARANA PRODUKSI PADA HOME INDUSTRI KERUPUK BAWANG." Jurnal Teknik Industri 13, no. 1 (2012): 60. http://dx.doi.org/10.22219/jtiumm.vol13.no1.60-66.

Full text

Abstract:

Onion Cracker has a unique onion is half maturation of the chewy dough and cut into thin hard, the pieces can be goodjust by using the slicer. The perpetrators of many home industry who complain that their profits can not be produced due to constraints on the maximum cutting process that is still traditional. It is therefore necessary process improvements toincrease production capacity, as well as conducting a feasibility study. Based on market aspects, the replacement methods on a conventional blade cutting process of using a new cutting machine at UD. Kalirejo considered feasible because of

APA, Harvard, Vancouver, ISO, and other styles

49

Omer Taha Ahmed Elmukashfi, Taha Ahmed Elmukashfi Elsheikh, Elsheikh Aljayli Taha Ahmed Elmukashfi, and Mohamed AbdelSalam Nurein. "Hippocampal Volumetry among Sudanese Patients attending Elmoalem Hospital, Sudan; structural MRI study (2021-2022)." World Journal of Advanced Research and Reviews 18, no. 3 (2023): 776–81. http://dx.doi.org/10.30574/wjarr.2023.18.3.1128.

Full text

Abstract:

Background: Hippocampal volume has sharp rise till age of 2 years; then it rises slowly. Objective: To build a reference for hippocampus volume among Sudanese population. Method: It was a comparative cross-sectional facility base study; with total coverage of 65 Sudanese patients attending Elmoalem Hospital, for 3D MRI brain, during (December 2021 –April 2022). Dependent variable was hippocampal volume and independent was personal data. Data was collected using master sheet. Measurement was done using 3D slicer program. SPSS version 23 and Chi square test were used. P≤ 0.05 was considered stat

APA, Harvard, Vancouver, ISO, and other styles

50

Sahbana, Muhammad Agus, Achmad Setiawan, Zainol Arifin, et al. "Implementation of process technology and e-commerce in efforts to increase capacity and marketing of “Omah Kripik”." Abdimas: Jurnal Pengabdian Masyarakat Universitas Merdeka Malang 10, no. 1 (2025): 167–78. https://doi.org/10.26905/abdimas.v10i1.14637.

Full text

Abstract:

Seloliman Village is one of the banana producers with an average production of 10-15 tons per year. The "Omah Kripik" business group was founded in 2022 to process bananas into banana chips. The process of making banana chips is still hampered by the problem of limited production capacity and product marketing with the potential for large availability of raw materials. This community partnership empowerment (PKM) activity aims to implement process technology and e-commerce to increase production capacity and product marketing. Activity method: training and assistance in implementing process te

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!