Log in

Relevant bibliographies by topics / Slip casting / Dissertations / Theses

To see the other types of publications on this topic, follow the link: Slip casting.

Dissertations / Theses on the topic 'Slip casting'

Author: Grafiati

Published: 4 June 2021

Last updated: 26 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 34 dissertations / theses for your research on the topic 'Slip casting.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse dissertations / theses on a wide variety of disciplines and organise your bibliography correctly.

1

Saxena, Pawan. "Slip casting of silicon nitride." Thesis, McGill University, 1992. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=56974.

Full text

Abstract:

Slip casting is a well established technique for the manufacture of traditional ceramic bodies, such as clays and whitewares. It combines complex shaping with high green densities, resulting in low shrinkage and good densification behaviour.<br>This method, however, has received little attention in the field of engineering ceramics especially with regard to silicon nitride. Commercial fabrication of silicon nitride, a major contender for high temperature applications due to its excellent thermomechanical properties, has been confined to hot pressing. This is an expensive process and has geomet

APA, Harvard, Vancouver, ISO, and other styles

2

Jonker, A., and JH Potgieter. "An evaluation of selected waste resources for utilization in ceramic materials applications." Elsevier, 2004. http://encore.tut.ac.za/iii/cpro/DigitalItemViewPage.external?sp=1000929.

Full text

Abstract:

Many industrial processes generate large amounts of waste. Typical examples include the fertiliser industry (phosphogypsum), ferro-alloy and steel producers (slag), as well as the power generating industry (fly ash). Although some waste products are currently used to a limited extend (e.g. fly ash and cement in cement), there is a constant need to find more uses and newapplications for these. This investigation describes work done to develop a novel ceramic body, which can potentially be used as a ceramic filter for purification of waste water and potable water.

APA, Harvard, Vancouver, ISO, and other styles

3

Hampton, J. Holly D. "Mechanics of slip casting and filter pressing of alumina ceramics." Thesis, McGill University, 1987. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=63859.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Ivanchenko, S. E., I. O. Dulina, A. G. Nikulin, R. O. Kyrpal, S. O. Umerova, and A. V. Ragulya. "The Influence of Slip Characteristics and Casting Parameters on the Thickness of Thin Films Obtained by Tape Casting." Thesis, Sumy State University, 2013. http://essuir.sumdu.edu.ua/handle/123456789/35213.

Full text

Abstract:

Tape casting slips with different composition have been prepared using BaTiO3 nanopowder with a particle size in range of 20-25 nm. Ethanol, low polar organic solvent and menton were used as the sol-vents. Polyvinylbutyral and Butvar were used as binders. Dibutyl phthalate and polyethylene gly-col where used as plasticizers. Rheological properties of BaTiO3 suspensions were carried out on a rotary rhe-ometer. Casted tapes have been characterized by optical microscopy and optical profilome-try. Suspensions for tape casting characterized by pseudoplastic and pseudoplastic-dilatancy nature of the

APA, Harvard, Vancouver, ISO, and other styles

5

Murfin, Alice M. "Thermally enhanced colloidal processing of #alpha#-alumina." Thesis, University of Nottingham, 1995. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.283403.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Harris, Bethan. "The design and development of binders for slip casting and ceramic injection moulding." Thesis, Keele University, 2007. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.635892.

Full text

Abstract:

Slip casting and ceramic injection moulding are two techniques used in industry to produce advanced ceramics, which are ceramic parts with a good net shape, high complexity and of high strength. When slip or paste formulations are made up for use in these two shape forming techniques, it is often the binder that gives the formulation the flow characteristics and strength to be shaped and removed from the mould successfully with little or no defects. Water based binders are becoming more prominent in industry in recent times than traditional oil or wax based binders. They have a number of advan

APA, Harvard, Vancouver, ISO, and other styles

7

Türedi, Enbiya [Verfasser]. "Slip Casting of Carbon and SiC Ceramics : Schlickergießen von Kohlenstoff- und Siliziumcarbid-Keramik / Enbiya Türedi." Aachen : Shaker, 2010. http://d-nb.info/1098040538/34.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Ruiters, Mellaney Bualin. "The development of a translucent low fired porcelain casting slip using South African raw materials." Thesis, Nelson Mandela Metropolitan University, 2017. http://hdl.handle.net/10948/20004.

Full text

Abstract:

The purpose of the research was to develop a translucent low fired porcelain casting slip using South African raw materials, due to the ever increasing electricity tariffs in South Africa as well as the physical deterioration put on the elements and brickwork in electric kilns when fired to traditional porcelain temperatures. Traditional porcelain bodies that can be purchased from South African suppliers are required to be fired to between 12000C and 13000C. The commercially prepared porcelains when tested produced white vitrified bodies but were lacking in translucency. Local ceramic artists

APA, Harvard, Vancouver, ISO, and other styles

9

Hudoba, Michael W. "Design of a Modified Slip Casting Procedure for the Single Step Manufacture of Sealed Silicone Balloons." The Ohio State University, 2011. http://rave.ohiolink.edu/etdc/view?acc_num=osu1306516214.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Yang, Zhengtao. "CHARACTERIZATION AND AQUEOUS COLLOIDAL PROCESSING OF TUNGSTEN NANO-POWDERS." Master's thesis, University of Central Florida, 2009. http://digital.library.ucf.edu/cdm/ref/collection/ETD/id/2693.

Full text

Abstract:

Extensive attention has been paid to consolidate nanoparticles into nanocrystalline components that possess better properties than their coarse-grained counterparts. Nanocrystalline monolithic tungsten (W) has been envisaged to possess better properties than coarse-grained tungsten and to improve the performance of many military components. Commercially available nano-W powders were characterized via X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), Auger electron spectroscopy (AES) and Brunauer, Emmett,

APA, Harvard, Vancouver, ISO, and other styles

11

Smith, Samantha Gail. "Novel Preparation of Porous Alumina using Ice Particles as Pore-Forming Agents." Thesis, Virginia Tech, 2011. http://hdl.handle.net/10919/76830.

Full text

Abstract:

Porous ceramics have successfully been used in a wide variety of highly advanced applications. Current routes to porous ceramics are limited in the types of porosity they can create and no one process is flexible enough to create any desired structure. This study introduces the use of ice particles as pore forming agents to fabricate porous materials. This novel method possesses several advantages over current industrial techniques including environmental friendliness, low cost, and flexibility in size and shape of resulting pores. Porous ceramic structures were created by adding preformed

APA, Harvard, Vancouver, ISO, and other styles

12

Silva, Lucas Hian da [UNESP]. "Novo formato de pilar protético em zircônia estabilizada por Itría (Y-Tzp) para implantodontia desenvolvido pela técnica de slip casting." Universidade Estadual Paulista (UNESP), 2011. http://hdl.handle.net/11449/97343.

Full text

Abstract:

Made available in DSpace on 2014-06-11T19:28:57Z (GMT). No. of bitstreams: 0 Previous issue date: 2011-07-08Bitstream added on 2014-06-13T19:58:20Z : No. of bitstreams: 1 silva_lh_me_sjc.pdf: 2510222 bytes, checksum: 9b0884b924775ed48bb9667a27133675 (MD5)<br>Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)<br>O objetivo deste estudo foi desenvolver um novo formato de pilar protético estético em zircônia (3Y-TZP) visando suprimir a utilização do parafuso trespassante utilizado no formato convencional de pilares protéticos em zircônia. Inicialmente foi feita a caracterização

APA, Harvard, Vancouver, ISO, and other styles

13

Ainsley, C. C. "An investigation into the use of slip casting of 316L stainless steel as a method of forming injection moulding tools." Thesis, University of Liverpool, 1997. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.263770.

Full text

APA, Harvard, Vancouver, ISO, and other styles

14

Silva, Lucas Hian da. "Novo formato de pilar protético em zircônia estabilizada por Itría (Y-Tzp) para implantodontia desenvolvido pela técnica de slip casting /." São José dos Campos : [s.n.], 2011. http://hdl.handle.net/11449/97343.

Full text

Abstract:

Orientador: Rubens Nisie Tango<br>Banca: Alexandre Luíz Souto Borges<br>Banca: Sebastião Ribeiro<br>Resumo: O objetivo deste estudo foi desenvolver um novo formato de pilar protético estético em zircônia (3Y-TZP) visando suprimir a utilização do parafuso trespassante utilizado no formato convencional de pilares protéticos em zircônia. Inicialmente foi feita a caracterização do material utilizado na técnica de colagem de barbotina (slip casting) através da confecção de uma barra que teve suas propriedades mecânicas, módulo de elasticidade (E) e coeficiente de Poisson (), grau de contração e di

APA, Harvard, Vancouver, ISO, and other styles

15

Paul, Anish. "Processing and properties of nanostructured zirconia ceramics." Thesis, Loughborough University, 2009. https://dspace.lboro.ac.uk/2134/11995.

Full text

Abstract:

The term nanoceramics is well known in the ceramic field for at least two decades. Even though there are many reports that nanoceramics are superior in terms of mechanical and other properties, no comprehensive and conclusive study on the grain size dependent variation in mechanical properties. So this study was an attempt to study the property variation with grain size and yttria content for a well known ceramic, yttria stabilised zirconia. High solids content but low viscosity YSZ nanosuspensions have been slip cast into -52% dense, very homogeneous green bodies in sizes up to 60 mm in diame

APA, Harvard, Vancouver, ISO, and other styles

16

Rolek, Ondřej. "Vliv nízkoteplotní plazmy na zlepšení keramické technologie." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2017. http://www.nusl.cz/ntk/nusl-319621.

Full text

Abstract:

This masters’s thesis contains literary research about basic shaping methods of ceramic materials concerning the slip casting method. In addition, stabilization of ceramic slips, drying of ceramic green bodies and their subsequent sintering are described. This thesis also includes a description of plasma technology, including DCBD (Diffuse Coplanar Barrier Discharge) technology. In experimental part of this thesis the Al2O3 powder was treated with DCBD technology. From the prepared powder, the green body was prepared by the slip casting method, which was subsequently sintered by one-step and t

APA, Harvard, Vancouver, ISO, and other styles

17

Ghanizadeh, Shaghayegh. "Synthesis and processing of nanostructured alumina ceramics." Thesis, Loughborough University, 2013. https://dspace.lboro.ac.uk/2134/13504.

Full text

Abstract:

The term Nanoceramics is well known in the ceramic field for at least two decades. In this project a detailed study was performed on the synthesis of α-alumina nanopowders. High solids content nanoalumina suspensions were prepared and used to form green bodies using both wet and dry forming routes. The green bodies were then sintered using both conventional single and two-step sintering approaches. Synthesis: Two different synthesis methods, viz. precipitation and hydrothermal treatment, were used to synthesize fine α-alumina powders from aluminium chloride, ammonia solution and TEAH (Tetraeth

APA, Harvard, Vancouver, ISO, and other styles

18

Gungor, Ergin. "Investigation Of Parameters Affecting The Drying Rate Of Sanitary Wares." Master's thesis, METU, 2005. http://etd.lib.metu.edu.tr/upload/2/12606649/index.pdf.

Full text

Abstract:

The influence of drying parameters namely residence time before drying, drying temperature, drying time, relative humidity, and slip recipe on the drying rate of slip cast sanitary wares, predominantly lavatories and toilet closets, was studied. The drying temperatures were changed from 80 oC to 110 oC with an increment of 10 oC. The drying time was changed from 10 to 7 h with a decrease of 1 hour. Relative humidity of the environment was changed from 60 to 75 %. The percent weight loss, percent residual moisture and the percent shrinkage of the samples were determined by weighing and measuri

APA, Harvard, Vancouver, ISO, and other styles

19

Klinsrisuk, Sujitra. "Novel electrocatalytic membrane for ammonia synthesis." Thesis, University of St Andrews, 2010. http://hdl.handle.net/10023/1294.

Full text

Abstract:

Novel ceramic membrane cells of BaCe₀.₅Zr₀.₃Y₀.₁₆Zn₀.₀₄O[subscript(3-δ)] (BCZYZ), a proton-conducting oxide, have been developed for electrocatalytic ammonia synthesis. Unlike the industrial Haber-Bosch process, in this work an attempt to synthesise ammonia at atmospheric pressure has been made. The membrane cell fabricated by tape casting and solution impregnation comprises of a 200 μm-thick BCZYZ electrolyte and impregnated electrode composites. Electrocatalysts for anode and cathode were investigated. For the anode, the co-impregnation of Ni and CeO₂ provided excellent electrode performance

APA, Harvard, Vancouver, ISO, and other styles

20

Dyen, Erica Gayle. "Holy Union?" VCU Scholars Compass, 2007. http://scholarscompass.vcu.edu/etd_retro/32.

Full text

APA, Harvard, Vancouver, ISO, and other styles

21

Morandi, Anne. "Intégration de matériaux oxydes innovants dans une cellule IT-SOFC." Phd thesis, Université Sciences et Technologies - Bordeaux I, 2013. http://tel.archives-ouvertes.fr/tel-00860737.

Full text

Abstract:

Cette thèse vise à évaluer le potentiel d'un nouveau couple cathode / électrolyte pour une application en IT-SOFC (700°C), par le biais de l'élaboration et du test de cellules à anode support de configuration planaire. Les matériaux concernés sont l'électrolyte BaIn0.3Ti0.7O2.85 (BIT07), de structure perovskite, et les nickelates de terres rares Ln2-xNiO4+ (LnN, Ln = La, Nd, Pr) en tant que cathodes ; ces matériaux ont montré des propriétés prometteuses dans des travaux préliminaires effectués à l'IMN et l'ICMCB. La première partie de cette thèse porte sur la mise en place d'un protocole d'éla

APA, Harvard, Vancouver, ISO, and other styles

22

Carvalho, Gustavo Antoniácomi de. "PROCESSAMENTO DE CERÂMICAS COM POROSIDADE GRADUADA UTILIZANDO AS TÉCNICAS DE FREEZE CASTING E COLAGEM DE BARBOTINA." Universidade Estadual de Ponta Grossa, 2018. http://tede2.uepg.br/jspui/handle/prefix/2741.

Full text

Abstract:

Submitted by Angela Maria de Oliveira (amolivei@uepg.br) on 2019-02-27T11:49:16Z No. of bitstreams: 2 license_rdf: 811 bytes, checksum: e39d27027a6cc9cb039ad269a5db8e34 (MD5) Gustavo Antoniacomi de Carvalho.pdf: 6310308 bytes, checksum: 8e1efd9d86bc5a1adf80b45bba2a3985 (MD5)<br>Made available in DSpace on 2019-02-27T11:49:16Z (GMT). No. of bitstreams: 2 license_rdf: 811 bytes, checksum: e39d27027a6cc9cb039ad269a5db8e34 (MD5) Gustavo Antoniacomi de Carvalho.pdf: 6310308 bytes, checksum: 8e1efd9d86bc5a1adf80b45bba2a3985 (MD5) Previous issue date: 2018-01-30<br>Coordenação de Aperfeiçoamento de

APA, Harvard, Vancouver, ISO, and other styles

23

Lima, Filho Venceslau Xavier de. "Preparação de sialon's reforçados com partículas alongadas de sialon obtidas por síntese por combustão (CS)." Master's thesis, Universidade de Aveiro, 2003. http://hdl.handle.net/10773/19051.

Full text

Abstract:

Mestrado em Ciência e Engenharia dos Materiais<br>O presente trabalho foi dedicado ao estudo e desenvolvimento de compósitos cerâmicos à base de sialon’s, reforçados com varetas de sialon, produzidas por síntese por combustão, com o objectivo de incrementar suas propriedades mecânicas e possibilitar sua aplicação industrial, Os cerâmicos baseados em Si3N4, entre eles os sialon’s, apresentam uma combinação de propriedades mecânicas, químicas e térmicas excelentes, que colocam esses cerâmicos entre os materiais mais promissores para o uso em aplicações estruturais sob temperaturas elevada

APA, Harvard, Vancouver, ISO, and other styles

24

Stocky, Robin. "Etude du traitement de poudres et influence des caractéristiques obtenues sur la transparence de céramiques du type spinelle." Electronic Thesis or Diss., Valenciennes, Université Polytechnique Hauts-de-France, 2020. http://www.theses.fr/2020UPHF0015.

Full text

Abstract:

Ce travail d’élaboration de céramique transparente pour la protection balistique s’inscrit dansun contexte d’allégement de structure et d’amélioration des propriétés optiques et mécaniques.Le remplacement de la face avant en verre par une céramique polycristalline, telle que lespinelle MgAl2O4 permet d’optimiser considérablement les performances balistiques, touten diminuant la masse et le volume de la protection. Le principal objectif de ce travail a étél’obtention d’une céramique transparente type spinelle avec une microstructure à grains finspermettant d’obtenir de bonnes propriétés mécaniq

APA, Harvard, Vancouver, ISO, and other styles

25

Yue-YuanLai and 賴岳淵. "Preparation of translucent polycrystalline alumina ceramic through slip casting." Thesis, 2016. http://ndltd.ncl.edu.tw/handle/86rsws.

Full text

Abstract:

碩士<br>國立成功大學<br>資源工程學系<br>104<br>In the present study, green bodies were prepared by slip casting that involves sintering of polycrystalline alumina. The sintering characteristics of the polycrystalline alumina at different temperatures were investigated. First, deionized water and alumina powder were mixed into a slurry, and then 500 ppm Mg2+ solution was added. The addition of Mg2+ increased the viscosity of the slurry; thus, a dispersant was needed to decrease the slurry viscosity. After tests, addition of dispersant to 4 wt% of the slurry was found to result in optimum mobility. When 3 mm

APA, Harvard, Vancouver, ISO, and other styles

26

J-Huang, S., and 黃仕杰. "Porous SiO2-5 mol% Al2O3 Structure by Slip Casting." Thesis, 2003. http://ndltd.ncl.edu.tw/handle/43647887640003892217.

Full text

APA, Harvard, Vancouver, ISO, and other styles

27

Anand, R. "Preparation of dense alumina ceramic by slip casting method." Thesis, 2014. http://ethesis.nitrkl.ac.in/6115/1/e-2013.pdf.

Full text

Abstract:

Present work focuses on the densification of alumina body by slip casting method. The optimization of slurry and sintering has been done at 1650oC. The alpha-alumina phase of ~1 micron particle size has been used as starting material. Along with alumina some additives like PMAA, MgO-salt, and PVA has been used to prepare slurry. The study of the densification of alumina body at varying soaking time of 2, 4, and 6 hours has also been carried. For better densification of alumina body, MgO salt has been used followed by acid treatment of the slurry. The microstructure of the sintered body is anal

APA, Harvard, Vancouver, ISO, and other styles

28

McCrummen, John Drew. "Development of porous ceramics with graded columnar pore structures via freeze-tape casting." 2008. http://etd.lib.montana.edu/etd/2008/mccrummen/McCrummenJ0508.pdf.

Full text

APA, Harvard, Vancouver, ISO, and other styles

29

Lu, Jun-Jie, and 呂鈞傑. "Slip Casting and Sintering Behavior of Aluminum-doped Zinc Oxide Ceramic." Thesis, 2017. http://ndltd.ncl.edu.tw/handle/376b54.

Full text

Abstract:

碩士<br>國立臺北科技大學<br>材料科學與工程研究所<br>106<br>Transparent conducting oxide (TCO) film is a filme material with superior resistivity (< 10-3 Ω•cm) and high trasmittance (> 80 %) for the visible light (380~780 nm). Sputtering is a general method to prepare TCO films. However, rare studies investigated the effects of process and characteristics of sputtering target. This study applied low-cost slip casting to manufacture aluminum-doped zinc oxide (AZO) ceramic. Slurrues (ZnO：Al2O3 = 98：2 wt%) with various solid contens was ball milled and then slip cast. The influecens of sintering temperature on the de

APA, Harvard, Vancouver, ISO, and other styles

30

Zi-JieLin and 林子傑. "Particle Packing in Green Bodies Formed through Slip Casting with Fine Alumina Powders." Thesis, 2019. http://ndltd.ncl.edu.tw/handle/j97rz3.

Full text

APA, Harvard, Vancouver, ISO, and other styles

31

Bagaria, Vishesh. "Processing and study of different properties of alumina product prepared by Slip Casting." Thesis, 2012. http://ethesis.nitrkl.ac.in/3378/1/Vishesh_Bagaria_108CR034.pdf.

Full text

Abstract:

In present work, alumina articles with different dopant percentage were prepared to study their various mechanical and high temperature properties. Before casting, alumina with different particles size gradation were obtained or prepared by planetary milling by varying the time of milling. The primary dopant used here is Nano-magnesia prepared by the precipitation method. An Ammonium Polymethacrylate solution was used as dispersant which has reduced likeliness to foam and produces slurries of abysmally low viscosities. The stability of the slip which clearly depends on the percentage of disper

APA, Harvard, Vancouver, ISO, and other styles

32

Lin, Hsing-huei, and 林幸慧. "Rheology, slip casting, and sintering behavior of submicron alumina powders dispersed with ammonium polyacrylate." Thesis, 2009. http://ndltd.ncl.edu.tw/handle/06600550098925952802.

Full text

Abstract:

碩士<br>國立成功大學<br>資源工程學系碩博士班<br>97<br>Properties of alumina ceramics are closely connected with the process condition. In which slurry preparation is a key point for colloidal forming. In this study, the dispersion behavior of slurries, the process of slip casting, and the pressureless sintering behavior have been discussed by changing the formulation of slurries, including dispersant amount, solid loading, and pH adjustment. In terms of characteristics of slurries, the results show that viscosity could decrease effectively by the 75% coverage of polymer on particle surfaces, and the green

APA, Harvard, Vancouver, ISO, and other styles

33

Xiao, Qing-Yan, and 蕭清燕. "Study on the processing and properties of the tricalcium phosphate/alumina bioceramic composite by slip casting." Thesis, 2001. http://ndltd.ncl.edu.tw/handle/65508148419570881183.

Full text

Abstract:

碩士<br>國立成功大學<br>材料科學及工程學系<br>89<br>英文摘要 Alumina was the first bioceramic widely used in clinic. It has been used in load-bearing hip prostheses and dental implants because of its combination of excellent corrosion resistance, high wear resistance and high strength. β-tricalcium phosphate is so far ideal candidate of synthetic bone replacement materials due to high biocompatiblity and osteoconduction. However, the mechanical behavior ofβ-tricalcium phosphate strongly influences their applications. This work investigated the feasibility of combining alumina withβ-tricalcium pho

APA, Harvard, Vancouver, ISO, and other styles

34

Huang, Yu-Tang, and 黃昱棠. "Investigation of particles and sediment behavior for the slip casting process by coupling CFD and DEM." Thesis, 2017. http://ndltd.ncl.edu.tw/handle/b22b37.

Full text

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!