Log in

Relevant bibliographies by topics / Slip connection / Dissertations / Theses

To see the other types of publications on this topic, follow the link: Slip connection.

Dissertations / Theses on the topic 'Slip connection'

Author: Grafiati

Published: 24 September 2021

Last updated: 30 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 22 dissertations / theses for your research on the topic 'Slip connection.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse dissertations / theses on a wide variety of disciplines and organise your bibliography correctly.

1

Kroeker, Donovan. "Structural analysis of transmission towers with connection slip modeling." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 2001. http://www.collectionscanada.ca/obj/s4/f2/dsk3/ftp04/MQ57549.pdf.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Hoffmann, Ulwin. "Direct grid connection and low voltage ride-through for a slip synchronous-permanent magnet wind turbine generator." Thesis, Stellenbosch : Stellenbosch University, 2012. http://hdl.handle.net/10019.1/19980.

Full text

Abstract:

Thesis (MScEng)--Stellenbosch University, 2012.<br>ENGLISH ABSTRACT: The slip synchronous-permanent magnet generator (SS-PMG) is a direct-driven, direct-to-grid generator for wind turbine applications. This investigation focuses on achieving automated grid connection and low voltage ride-through for a small-scale SS-PMG. To reduce cost and complexity, components such as blade pitch controllers and frequency converters are avoided. Instead, electromagnetic braking is employed to control turbine speed prior to grid synchronisation and compensation resistances are used to facilitate grid fa

APA, Harvard, Vancouver, ISO, and other styles

3

Lamy, Christophe. "Novel accurate tyre slip angle measurement means : application to tyre model identification." Thesis, Mulhouse, 2010. http://www.theses.fr/2010MULH3256.

Full text

Abstract:

Le trafic routier devenant de plus en plus dense, la sécurité active des véhicules doit être sans cesse améliorée. Ceci nécessite notamment une amélioration de la dynamique des véhicules. La majeure partie des efforts transmis par la chaussée au véhicule passant par les pneumatiques, une connaissance précise de l’interface pneu-sol est primordiale. Ceci passe notamment par le développement de modèles de pneumatiques et leur identification, à partir de mesures spécifiques, lors des phases de conception et de mise au point d’un véhicule. Le projet de thèse a pour objectif principal de contribuer

APA, Harvard, Vancouver, ISO, and other styles

4

Potgieter, Johannes Hendrik Jacob. "Optimal topology and critical evaluation of slip synchronous permanent magnet wind generator." Thesis, Stellenbosch : Stellenbosch University, 2014. http://hdl.handle.net/10019.1/86430.

Full text

Abstract:

Thesis (PhD)--Stellenbosch University, 2014.<br>ENGLISH ABSTRACT: In this study the recently proposed slip-synchronous permanent magnet generator (SS-PMG), is considered as an alternative to other wind generator topologies. The SS-PMG is connected directly to the grid without the need for a power electronic converter and it can also be connected directly to the turbine without a gearbox. Due to the SS-PMG requiring no gearbox or power electronic converter it is evident that this type of generator have a significant advantage regarding reduced maintenance and operation costs. The SS-PMG co

APA, Harvard, Vancouver, ISO, and other styles

5

Dhakal, Aman. "Use of Fiber Reinforced Polymer for Wood Roof-to-Wall Connections to Withstand Hurricane Wind Loads." University of Toledo / OhioLINK, 2019. http://rave.ohiolink.edu/etdc/view?acc_num=toledo1575821089949781.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Boggs, Joshua Thomas. "The Performance and Behavior of Deck-to-Girder Connections for the Sandwich Plate System (SPS) in Bridge Deck Applications." Thesis, Virginia Tech, 2008. http://hdl.handle.net/10919/32998.

Full text

Abstract:

An innovative approach to possible construction or rehabilitation of bridge decks can be found in a bridge construction system called the Sandwich Plate System (SPS). The technology developed and patented by Intelligent Engineering Canada Limited in conjunction with an industry partner, Elastogran GmbH, a member of BASF, may be an effective alternative to traditional bridge rehabilitation techniques. <p> Although the systemâ s behavior has been studied the connection of the SPS deck to the supporting girders has not been investigated. Two types of connection are presented in this research.

APA, Harvard, Vancouver, ISO, and other styles

7

Xu, Guoda, John M. Bartha, Stuart McNamee, Larry Rheaume, and Allen Khosrowabadi. "OPTICAL SLIP-RING CONNECTOR." International Foundation for Telemetering, 1999. http://hdl.handle.net/10150/607336.

Full text

Abstract:

International Telemetering Conference Proceedings / October 25-28, 1999 / Riviera Hotel and Convention Center, Las Vegas, Nevada<br>Current ground-based tracking systems at the DoD test and training ranges require transmission of a variety of signals from rotating platform to fixed control and process center. Implementation of commercial off the shelf (COTS) solution for transmitting high-speed, multiple-channel data signals over a rotational platform prompt the development of an advanced electro-optic hybrid rotating-to-fixed information transmission technology. Based on current demand,

APA, Harvard, Vancouver, ISO, and other styles

8

Ungkurapinan, Nibong. "A study of joint slip in galvanized bolted angle connections." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 2000. http://www.collectionscanada.ca/obj/s4/f2/dsk1/tape3/PQDD_0021/MQ53234.pdf.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Petkoglou, Alexandros. "Stability of building structures using NLFEA including second order effects : Applications with the software ATENA-GiD." Thesis, KTH, Betongbyggnad, 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-302435.

Full text

Abstract:

In Sweden, prefabrication in the construction industry is a very common system. In prefabricated structures, there are various kinds of connections and generally many hinged connections. Therefore, it is of high interest to study the behavior of the prefabricated buildings in relation to the connections. Two main theories that can be used to evaluate our structures are the non-linear finite element analysis (NLFEA) and the second order effects. These two theories help to study the real behavior of the structures. Software that can apply these two theories is the ATENA-GiD. Therefore, it was ve

APA, Harvard, Vancouver, ISO, and other styles

10

OLTMAN, JONATHAN A. "MODELING OF SLIP AND BEARING INTERACTIONS IN BOLTED CONNECTIONS SUBJECTED TO CYCLIC LOADING." University of Cincinnati / OhioLINK, 2007. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1181516304.

Full text

APA, Harvard, Vancouver, ISO, and other styles

11

Afzali, Nariman [Verfasser], and Natalie [Akademischer Betreuer] Stranghöner. "Slip-resistant connections made of carbon and stainless steel / Nariman Afzali ; Betreuer: Natalie Stranghöner." Duisburg, 2021. http://d-nb.info/1229349979/34.

Full text

APA, Harvard, Vancouver, ISO, and other styles

12

Shang, Haodi. "Experimental Investigation and Simulation of High Performance Surface Coating in Steel Bolted Slip-Critical Connections." Thesis, University of Louisiana at Lafayette, 2017. http://pqdtopen.proquest.com/#viewpdf?dispub=10287241.

Full text

Abstract:

<p>Slip-critical connections have been used in steel structures for a long time where bolted joints are subjected to cyclic load and fatigue with slotted or oversized holes. The understanding of these connections has resulted in the limitation of maximum slip coefficients (0.50 for Class B surfaces) with surface preparation. High performance surface coating (HPSC) is one possible new method to significantly enhance the strength of slip-critical connections. In this research, two kinds of mineral particles, synthetic diamond and tungsten carbide are applied on HPSC for simple shear slip tests w

APA, Harvard, Vancouver, ISO, and other styles

13

Corro, Claudia L. "An evaluation of the behaviour of slip-critical connections subjected to combined shear and tension." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 1998. http://www.collectionscanada.ca/obj/s4/f2/dsk1/tape11/PQDD_0014/MQ52534.pdf.

Full text

APA, Harvard, Vancouver, ISO, and other styles

14

Huang, Qibin, and Anitha Joy. "Compression perpendicular to the grain of Cross-Laminated Timber : Influence of support conditions of CLT on compressive strength and stiffness." Thesis, Linnéuniversitetet, Institutionen för byggteknik (BY), 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:lnu:diva-77339.

Full text

Abstract:

Cross-Laminated Timber (CLT) has recently become a popular construction material for building timber structures. One advantage of CLT is, that it can be used as floor, beam and wall element. As the arrangements of layers in CLT is in perpendicular direction to each other, it exhibits remarkable strength properties in both in-plane directions. However, the low stiffness and strength properties in compression perpendicular to the grain hinder application of CLT in high rising building, since forces are usually transferred from the wall elements through floor elements perpendicular to the grain.

APA, Harvard, Vancouver, ISO, and other styles

15

Kroeker, Donovan. "Structural analysis of transmission towers with connection slip modeling." 2000. http://hdl.handle.net/1993/2075.

Full text

Abstract:

In an effort to improve the structural analysis of transmission towers, this study investigates the effect of bolt slippage on the deflections and member stresses of latticed self-supporting transmission towers. The computer program developed in this study can model tower members as truss and beam elements, can incorporate bolt slippage using an instantaneous slippage model or a continuous slippage model, and can model the connections as semi-rigid (flexible connections) provided moment-rotation data are available. The slippage models require certain parameters, determined from load deformati

APA, Harvard, Vancouver, ISO, and other styles

16

Hsieh, Tsung-Cheng, and 謝宗成. "Evaluation of Slip Coefficient of Bolted Slip-Critical Connections with Thermal Sprayed Coating." Thesis, 2017. http://ndltd.ncl.edu.tw/handle/cbnu3r.

Full text

Abstract:

碩士<br>國立交通大學<br>土木工程系所<br>105<br>The objective of this study is to increase the slip coefficient of bolted slip-critical connections by applying a thermal sprayed coating on faying surfaces, and further to reduce the number of bolts and connection’s dimension while satisfying the design force. The specimens were designed according to related specifications. The effects of the coating material, coating thickness, steel material, bolt type, and surface roughness of the steel plate on the slip coefficient were evaluated. The test results showed that the slip coefficients of the connection by ther

APA, Harvard, Vancouver, ISO, and other styles

17

Chang, Cheng, and 張誠. "Slip Coefficient and Creep Behavior of Bolted Slip-Critical Connections with Thermal Sprayed Coating." Thesis, 2019. http://ndltd.ncl.edu.tw/handle/zx97xc.

Full text

Abstract:

碩士<br>國立交通大學<br>土木工程系所<br>107<br>This research explore the application of thermal sprayed coating to slip-critical joints to increase the slip coefficient and confirm the slip-critical joints with coating satisfying the creep requirements. The experiment consisted of two sequence tests of slip test and tension creep test. The slip test used to investigate the influence of the coating material and coating thickness on the slip coefficient. The tension creep test was conducted by applied the load calculated based on the slip coefficient, and recorded the slip due to the creep of the coating unde

APA, Harvard, Vancouver, ISO, and other styles

18

Li, Si-Wei, and 李思維. "Effect of Bolt Arrangement on Slip Behavior of Slip-Critical Connections with Thermal Sprayed Coating." Thesis, 2019. http://ndltd.ncl.edu.tw/handle/b86p6u.

Full text

Abstract:

碩士<br>國立交通大學<br>土木工程系所<br>107<br>In this study, thermal sprayed coating was applied to the faying surface of steel plates in order to increase the slip coefficient and enhance the slip resistance of the slip-critical joint. Moreover, this study aims to explore the effect of bolt arrangement on slip resistance. Slip tests of slip-critical connection using eight high-strength bolts were carried out to explore the effects of different bolt arrangement on the slip coefficient, bolt pretension, stress on the splice plate, and slip resistance. Splice plates of the specimens were thermal sprayed coat

APA, Harvard, Vancouver, ISO, and other styles

19

Suei, Kai-Yuan, and 隋開元. "A study on high-strength bolts and slip-critical connections with welds." Thesis, 2015. http://ndltd.ncl.edu.tw/handle/60558647545572034856.

Full text

Abstract:

碩士<br>國立高雄大學<br>土木與環境工程學系碩士班<br>103<br>As suggested by AISC (2010), Taiwan steel design regulations do not recommend slip-critical high strength bolts to use with fillet welds. No similar restrictions are set by AIJ (2012). This paper evaluates the deformation capacity and strength of slip-critical high strength bolts in combination with fillet welds. AIJ suggests that bolts may have sliding deformations of 0.2 mm. The analyzed 45 joints were found to have deformations greater than the sliding deformation, and even greater than the fracture deformations of fillet welds. The joint strength were

APA, Harvard, Vancouver, ISO, and other styles

20

Nidhil, Mohamed A. R. "Influence of Hydrodynamic Slip on the Wake Dynamics and Convective Transport in Flow Past a Circular Cylinder." Thesis, 2017. http://etd.iisc.ac.in/handle/2005/3709.

Full text

Abstract:

Hydrodynamic slip is known to suppress vorticity production at the solid-fluid boundary in bluﬀ body flows. This suppression combined with the enhanced vorticity convection results in a substantial reduction in the unsteady vortex shedding and the hydrodynamic loads experienced by the bluﬀ body. Here, using combined theoretical and computational techniques, we investigate the eﬀect of slip on three-dimensional wake dynamics and convective scalar transport from a circular cylinder placed in the uniform cross-flow of a Newtonian incompressible fluid over Reynolds numbers ranging from 0.1 to 1000

APA, Harvard, Vancouver, ISO, and other styles

21

Nidhil, Mohamed A. R. "Influence of Hydrodynamic Slip on the Wake Dynamics and Convective Transport in Flow Past a Circular Cylinder." Thesis, 2017. http://etd.iisc.ernet.in/2005/3709.

Full text

Abstract:

Hydrodynamic slip is known to suppress vorticity production at the solid-fluid boundary in bluﬀ body flows. This suppression combined with the enhanced vorticity convection results in a substantial reduction in the unsteady vortex shedding and the hydrodynamic loads experienced by the bluﬀ body. Here, using combined theoretical and computational techniques, we investigate the eﬀect of slip on three-dimensional wake dynamics and convective scalar transport from a circular cylinder placed in the uniform cross-flow of a Newtonian incompressible fluid over Reynolds numbers ranging from 0.1 to 1000

APA, Harvard, Vancouver, ISO, and other styles

22

Barcz, Michał. "Filozoficzne źródła krytyki przyczynowej koncepcji działania." Doctoral thesis, 2018. https://depotuw.ceon.pl/handle/item/2605.

Full text

Abstract:

W pracy dokonuję przeglądu współczesnych, przyczynowych teorii działania oraz związanych z nimi problemów teoretycznych, a także stawiam pytanie o źródło tych trudności. W części pierwszej przedstawiona jest teoria kauzalna rozumiana jako rodzina teorii przyjmujących założenia o przyczynowej naturze działań i przyczynowej naturze wyjaśnień działań. Pierwszy rozdział poświęcony jest rekonstrukcji teorii Davidsona, która stanowi pierwsze współczesne sformułowanie teorii kauzalnej. W rozdziale drugim przedstawiam dwa przykłady koncepcji naturalistycznych – teorie Melego i Dretskego. W rozdziale t

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!