Log in

Relevant bibliographies by topics / Slitina / Journal articles

To see the other types of publications on this topic, follow the link: Slitina.

Journal articles on the topic 'Slitina'

Author: Grafiati

Published: 4 June 2021

Last updated: 1 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 journal articles for your research on the topic 'Slitina.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

Vystrčil, J., J. Fojt, H. Moravec, and L. Joska. "Susceptibility of cobalt and nickel based alloys for bioaplication to nonuniform forms of corrosion." Koroze a ochrana materialu 58, no. 1 (2014): 5–10. http://dx.doi.org/10.2478/kom-2013-0016.

Full text

Abstract:

Streszczenie Kobaltové a niklové slitiny jsou běžně používaným materiálem v zubním lékařství. Jedním z důvodů použití je snaha o nahrazení slitin drahých kovů, jejichž cena neustále vzrůstá. Slitiny navíc v porovnání se zlatem a jeho slitinami dosahují vyšších modulů pružnosti, což umožňuje zmenšení hmotnosti dentálních prací při zachování stejných pevnostních charakteristik. Práce byla zaměřena na studium korozního chování komerčně dostupných slitin niklu a kobaltu užívaných v bioaplikacích. Byla studována náchylnost k nerovnoměrným formám koroze a posouzen vliv mikrostruktury na charakter ko

APA, Harvard, Vancouver, ISO, and other styles

2

Krausová, A., J. Macák, P. Sajdl, V. Renčiuková, and R. Novotný. "Koroze slitin Zr–Nb a Zr–Sn za simulovaných podmínek reaktoru VVER." Koroze a ochrana materialu 59, no. 4 (2015): 99–102. http://dx.doi.org/10.1515/kom-2015-0020.

Full text

Abstract:

Abstract Oxidační kinetiku lze v případě koroze zirkoniových slitin rozdělit do dvou stádií, která jsou od sebe oddělená transientním stavem. Výskyt transientního stavu je z korozního hlediska klíčový, neboť při něm dochází ke zvýšení rychlosti oxidace. V této práci byly pomocí in-situ elektrochemické impedanční spektroskopie studovány slitiny zirkonia Zr–Nb a Zr–Sn při teplotě 340 °C a tlaku 15 MPa v prostředí, které simulovalo chladivo reaktoru VVER. Cílem dlouhodobých experimentů (až 9000 h) bylo charakterizovat oxidační kinetiku v závislosti na expoziční době a typu zirkoniové slitiny. Výs

APA, Harvard, Vancouver, ISO, and other styles

3

Krausová, A., M. Novák, J. Macák, and I. Kratochvílová. "Polykrystalická diamantová vrstva: vhodná ochrana povrchu zirkoniových slitin?" Koroze a ochrana materialu 59, no. 2 (2015): 50–52. http://dx.doi.org/10.1515/kom-2015-0012.

Full text

Abstract:

Polykrystalická diamantová vrstva (PCD) se jeví jako vhodná ochrana pro snížení chemické reaktivity zirkoniových slitin. Její aplikací by mohlo dojít k výraznému zvýšení odolnosti zirkonia proti vysokoteplotní korozi a rovněž vůči navodíkování. V této práci jsou zkoumány vzorky slitiny zirkonia Zry-2, které byly pokryty 300 nm tenkou vrstvou PCD a pre-exponovány v páře o teplotách 950 a 1150 °C. Pomocí ex-situ elektrochemické impedanční spektroskopie jsou studovány přenosové parametry a morfologie PCD vrstvy. Výsledky ukazují, že vzorky slitiny zirkonia Zry-2, které byly pokryty PCD vrstvou, k

APA, Harvard, Vancouver, ISO, and other styles

4

Marušáková, Daniela, Jan Berka, and Petr Sajdl. "Testování mechanických vlastností Inconelu 713 a 738 pro pokročilé reaktory." Koroze a ochrana materialu 59, no. 4 (2015): 103–6. http://dx.doi.org/10.1515/kom-2015-0021.

Full text

Abstract:

Abstract Mezi kovové konstrukční materiály pro komponenty pokročilých plynem chlazených reaktorů patří niklové superslitiny Inconel 713 a 738. V rámci projektu aplikovaného výzkumu řešeného na VŠCHT Praha a CV Řež byly testovány mechanické vlastnosti těchto slitin ve výchozím stavu a po expozici vzorků v heliu obsahujícím stopové nečistoty (CO, H2, CH4, H2O) při teplotě 900 °C po dobu 1000 hod. Vzorky testovaných slitin byly vyrobeny: a) z původního litého materiálu (virgin), b) přepracovaného materiálu z výroby (revert 100R) a c) materiálu získaného slitím těchto materiálů v poměru 50V/50R. K

APA, Harvard, Vancouver, ISO, and other styles

5

Krausová, A., J. Macák, P. Sajdl, and O. Vénos. "Koroze slitin zirkonia v prostøedí vyšších koncentrací lithia/ Corrosion of zirconium alloys in the environments with elevated concentration of lithium." Koroze a ochrana materialu 58, no. 4 (2014): 95–99. http://dx.doi.org/10.1515/kom-2015-0001.

Full text

Abstract:

Série dlouhodobých in-situ experimentů byla zaměřena na studium negativního vlivu lithných iontů na dva typy slitiny zirkonia s niobem Zr1Nb. Chování slitin bylo sledováno pomocí in-situ aplikovaných elektrochemických metod v experimentální vysokotlaké - vysokoteplotní smyčce (280 °C, 8 MPa), umožňující cirkulaci média. Experimenty byly prováděny jak v prostředí, které simuluje běžné složení chladiva reaktoru typu VVER, tak v prostředí o vyšších koncentracích lithia (70 a 200 mg l-1 Li+ ve formě LiOH). V obou typech expozičního prostředí bylo cílem sledovat přenosové parametry oxidické vrstvy,

APA, Harvard, Vancouver, ISO, and other styles

6

Herkenrath, Heinz. "Slitting of Core Paper -Cost Saving and Slitting Quality Improvement throug Slitting Process Automation-." JAPAN TAPPI JOURNAL 61, no. 11 (2007): 1329–32. http://dx.doi.org/10.2524/jtappij.61.1329.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Stefanik, Andrzej, Piotr Szota, Sebastian Mróz, and Henryk Dyja. "Slitting Criterion for Various Slitting Roll Geometry in MSR Rolling Process." Solid State Phenomena 165 (June 2010): 365–70. http://dx.doi.org/10.4028/www.scientific.net/ssp.165.365.

Full text

Abstract:

The main idea of multi slit rolling (MSR) technology is the capability of producing two, three, four and even five rods simultaneously from a single strip in a hot rolling process. Correct separation of the joined strips is one of the major problems in the MSR process. High tensile stresses (perpendicular to the rolling direction) are generated during movement of the band by the slitting rolls in the joining bridge. Critical value of the slitting criterion is mainly affected by geometry of the slitting rolls (angle, dimension and mass of the slitting rolls), temperature of the band and rolling

APA, Harvard, Vancouver, ISO, and other styles

8

Zheng, Zhong Peng, Xin Yang Jiang, and Xin Jin. "Research on Modal Analysis of Precision Micro Slitting Turn-Milling Machine Tool Based on Hammer Experimental Method." Solid State Phenomena 295 (August 2019): 67–72. http://dx.doi.org/10.4028/www.scientific.net/ssp.295.67.

Full text

Abstract:

In order to improve the dynamic stability of precision micro slitting turn-milling machine tools, reduce or avoid the vibration problem during the cutting process, optimize the machine structure and processing parameters, the modal analysis of precision micro slitting turn-milling machine tool based on hammer experimental method was researched. In this paper, by analyzing the mechanism of precision micro slitting turn-milling machine tools, the multi degree-of-freedom mathematical vibration model of precision slitting turn-milling machine tools is constructed. The precision micro turn-milling

APA, Harvard, Vancouver, ISO, and other styles

9

Starkov, N. V., and Yu L. Bobarikin. "Choosing the Slitting Method and the Profile of the Slitting Rolls for Rolling and Slitting." Metallurgist 59, no. 5-6 (2015): 390–95. http://dx.doi.org/10.1007/s11015-015-0115-4.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Mahmoudi, Amir Hossein, Soroush Heydarian, and Kourosh Behnam. "Numerical and Experimental Study of the Plasticity Effect on Residual Stress Measurement Using Slitting Method." Materials Science Forum 768-769 (September 2013): 107–13. http://dx.doi.org/10.4028/www.scientific.net/msf.768-769.107.

Full text

Abstract:

Residual Stress measurement has gained interests among researchers for many years. Slitting method is one of the destructive techniques that relies on the introduction of an increasing cut to a part containing residual stresses. Similar to all other mechanical strain relief techniques, slitting suffers from the level of plasticity occurs within the sample while cutting. In the present research, slitting method was simulated using finite element analysis. The correct performance of the slitting method procedure was explored using known residual stress fields. Then, simulations of the quenching

APA, Harvard, Vancouver, ISO, and other styles

11

Broukal, Z., V. Fialová, and J. Novotný. "The Assessment of the Biocompatibility of Dental Alloys and Alloys for Dental Amalgam. Part First." Česká stomatologie/Praktické zubní lékařství 114, no. 3 (2014): 53–59. http://dx.doi.org/10.51479/cspzl.2014.010.

Full text

APA, Harvard, Vancouver, ISO, and other styles

12

Broukal, Z., V. Fialová, and J. Novotný. "The Assessment of the Biocompatibility of Dental Alloys and Alloys for Dental Amalgam. Part Second." Česká stomatologie/Praktické zubní lékařství 114, no. 6 (2014): 116–21. http://dx.doi.org/10.51479/cspzl.2014.023.

Full text

APA, Harvard, Vancouver, ISO, and other styles

13

Broukal, Z., V. Fialová, and J. Novotný. "The Assessment of the Biocompatibility of Dental Alloys and Alloys for Dental Amalgam. Part Second." Česká stomatologie/Praktické zubní lékařství 114, no. 6 (2014): 116–21. http://dx.doi.org/10.51479/cspzl.2014.023.

Full text

APA, Harvard, Vancouver, ISO, and other styles

14

Broukal, Z., V. Fialová, and J. Novotný. "The Assessment of the Biocompatibility of Dental Alloys and Alloys for Dental Amalgam. Part First." Česká stomatologie/Praktické zubní lékařství 114, no. 3 (2014): 53–59. http://dx.doi.org/10.51479/cspzl.2014.010.

Full text

APA, Harvard, Vancouver, ISO, and other styles

15

Shokrieh, Mahmood M., and Saeed Akbari R. "Simulation of slitting method for calculation of compliance functions of laminated composites." Journal of Composite Materials 46, no. 9 (2011): 1101–9. http://dx.doi.org/10.1177/0021998311415725.

Full text

Abstract:

In this research, the process of slitting with an assumed residual stress distribution is simulated to calculate compliance functions of laminated composites. The primary aim of this article is to investigate different parameters influencing the calculation of compliance coefficients for laminated composites using a finite element model. First, using two- and three-dimensional finite element models, the process of slitting in isotropic materials for calculating the compliance coefficients is simulated. The results show a complete agreement between the two models. Also, the results of simulatio

APA, Harvard, Vancouver, ISO, and other styles

16

Shi, Xian Jing, Qiu Sheng Yan, Jia Bin Lu, and Jun Zeng. "Finite Element Simulation of Shearing Force in Disc Slitting Process." Advanced Materials Research 1027 (October 2014): 150–55. http://dx.doi.org/10.4028/www.scientific.net/amr.1027.150.

Full text

Abstract:

Based on the principle of disc slitting process, a 3D model of the disc slitting process for galvanized sheet was established by using DEFORM-3D software, and the deformation, fracture and material effective stress of galvanized sheet were analyzed. The surface morphology of numerical simulation is in good agreement with the actual result. The curve of shearing force was obtained and well matched with the change rule of slitting process. Compared with the theoretical calculation result, the simulation result is reliable and can provide a reference for the calculation of shearing force.

APA, Harvard, Vancouver, ISO, and other styles

17

Mróz, Sebastian. "New Roll Pass Design to the Bar Rolling Process Using Longitudinal Slitting Passes." Solid State Phenomena 165 (June 2010): 310–15. http://dx.doi.org/10.4028/www.scientific.net/ssp.165.310.

Full text

Abstract:

: groove-rolling, energy-force parameters, numerical modeling, FEM Abstract. The paper presents the developed new roll pass design and a new method of rolling in slitting passes of bar with longitudinal band, which reduce energy consumption and increase durability of slitting passes compared to the methods used previously. The results of theoretical analysis were verified based on the measurements of rolling power taken during bar rolling according to the multi-strand rolling technology. Forge2007 software was employed in the numerical analysis of the process of rolling with band slitting.

APA, Harvard, Vancouver, ISO, and other styles

18

Ivanić, Ivana. "Slitine s prisjetljivosti oblika (I. dio): najznačajnija svojstva." Kemija u industriji 63, no. 9-10 (2014): 323–30. http://dx.doi.org/10.15255/kui.2013.016.

Full text

APA, Harvard, Vancouver, ISO, and other styles

19

Mahmoudi, AH, and AR Hasani. "A modification to the cross slitting method for measuring two components of residual stresses." Journal of Strain Analysis for Engineering Design 52, no. 2 (2017): 93–101. http://dx.doi.org/10.1177/0309324716685915.

Full text

Abstract:

Residual stresses measurement techniques are constantly modified and progressed. There have been many residual stresses measurement methods developed and practiced by researchers. Slitting method is one of the destructive techniques that can measure residual stresses deep within the components. However, the conventional slitting method can only measure the component of residual stress normal to the cut plane. Furthermore, the cross slitting has been developed to measure two components of residual stresses simultaneously. In the current research, a modification to the cross slitting method is p

APA, Harvard, Vancouver, ISO, and other styles

20

Tobari, Isamu. "Latest DIENES Slitting Systems." JAPAN TAPPI JOURNAL 67, no. 9 (2013): 970–76. http://dx.doi.org/10.2524/jtappij.67.970.

Full text

APA, Harvard, Vancouver, ISO, and other styles

21

Tobari, Isamu. "Latest DIENES Slitting Systems." JAPAN TAPPI JOURNAL 68, no. 10 (2014): 1151–58. http://dx.doi.org/10.2524/jtappij.68.1151.

Full text

APA, Harvard, Vancouver, ISO, and other styles

22

Supe-Dienes, Rudolf, and Norbert Lanzerath. "SLITTING, The European Way. Latest Development in Slitting Technology and Dust Reduction." JAPAN TAPPI JOURNAL 56, no. 12 (2002): 1737–45. http://dx.doi.org/10.2524/jtappij.56.1737.

Full text

APA, Harvard, Vancouver, ISO, and other styles

23

Szota, P., D. Strycharska, S. Mróz, and A. Stefanik. "Analysis Of Rolls Wear During The Ribbed Bars Multi-Slit Rolling Process." Archives of Metallurgy and Materials 60, no. 2 (2015): 815–20. http://dx.doi.org/10.1515/amm-2015-0212.

Full text

Abstract:

Abstract An analysis of the roll wear in the multi-strand rolling of reinforced concrete ribbed bars has been made in the study. In the technology under consideration, the longitudinal partition of the band takes place in special slitting passes, while the separation of individual strands – in idle separating rollers. During rolling, the slitting passes undergo fast wear compared to the remaining passes of the rolling line. The paper reports the results of theoretical and experimental examinations, on the basis of which the wear of the slitting passes in the 16 mm-diameter ribbed bar three-str

APA, Harvard, Vancouver, ISO, and other styles

24

PÁCA, J. "Materials of construction in biotechnological industries. Part I. Metals and their alloys." Kvasny Prumysl 36, no. 2 (1990): 40–42. http://dx.doi.org/10.18832/kp1990007.

Full text

APA, Harvard, Vancouver, ISO, and other styles

25

Ma, Jin, Hongbing Lu, Ming Li, and Bo Wang. "Burr Height in Shear Slitting of Aluminum Webs." Journal of Manufacturing Science and Engineering 128, no. 1 (2005): 46–55. http://dx.doi.org/10.1115/1.2123027.

Full text

Abstract:

Continuous shear slitting of aluminum sheets (or webs) was investigated using a laboratory slitter. This study focused on experimental investigation of the effect of three major slitting parameters (clearance, overlap, and cant angle) on the burr height. It was found that there exists a critical clearance in shear slitting of aluminum webs; using a clearance higher than the critical value leads to unacceptable burr height. The blade overlap must be within a certain range; using an overlap below the lower bound of this range will not enable the cut of a web, and utilizing an overlap higher than

APA, Harvard, Vancouver, ISO, and other styles

26

Lu, Hongbing, Jin Ma, and Ming Li. "Edge Trimming of Aluminum Sheets Using Shear Slitting at a Rake Angle." Journal of Manufacturing Science and Engineering 128, no. 4 (2006): 866–73. http://dx.doi.org/10.1115/1.2336258.

Full text

Abstract:

Edge burr is inevitably present at a slit edge when an aluminum web is shear slit by a pair of rotary knives (or blades) engaged and rotated in opposite directions. This paper presents a new method of shear slitting for an aluminum sheet to produce very low edge burr height, for use in edge trimming. The method uses the same bottom rotary blade as in the traditional shear slitting, but a revised top blade that forms a rake angle with respect to the bottom blade. The top blade edge is chamfered so that the surface of the top blade edge is parallel to the surface of the bottom blade edge to prod

APA, Harvard, Vancouver, ISO, and other styles

27

Reznik, M. "SLITting Down the Peanut Allergy." Science Translational Medicine 5, no. 167 (2013): 167ec9. http://dx.doi.org/10.1126/scitranslmed.3005598.

Full text

APA, Harvard, Vancouver, ISO, and other styles

28

Davies, A., W. A. Adams, and D. Wilman. "Soil compaction in permanent pasture and its amelioration by slitting." Journal of Agricultural Science 113, no. 2 (1989): 189–97. http://dx.doi.org/10.1017/s0021859600086755.

Full text

Abstract:

SUMMARYIn a field which had been grazed by dairy cows for 26 years, the bulk density of both total soil and fine earth increased rapidly with depth down to 10–12 cm, but decreased below this depth. The bulk density was approximately twice as great in the 10–12 cm as in the 2–4 cm layer. Total porosity in the 10–12 cm layer was only 22%.Slitting the soil to penetrate the compacted layer approximately doubled net herbage accumulation and the net uptake of N, P and K, raising herbage production and uptake of nutrients from a low level to an acceptable one. Slitting tended to increase the concentr

APA, Harvard, Vancouver, ISO, and other styles

29

Park, J. W., and J. L. Ferracane. "Residual Stress in Composites with the Thin-ring-slitting Approach." Journal of Dental Research 85, no. 10 (2006): 945–49. http://dx.doi.org/10.1177/154405910608501015.

Full text

Abstract:

During polymerization, dental composites develop residual stresses that may compromise the marginal integrity and properties of the restorative. The objective of this study was to use the thin-walled ring-slitting method to measure and compare residual stresses. The hypotheses to be tested were that composites would generate different levels of residual stress based on their specific formulations and slitting times. Rings made from composites (Z100, Herculite, and Heliomolar) were cut at different times (10 min, 1 and 24 hrs) after being light-cured, and stress was measured. Residual stress wa

APA, Harvard, Vancouver, ISO, and other styles

30

Nam, Ki-Woo, Cheol-Soo Kim, and Seok-Hwan Ahn. "The effect of wear on the damage of slitting knife." Journal of the Korea Society For Power System Engineering 20, no. 4 (2016): 5–11. http://dx.doi.org/10.9726/kspse.2016.20.4.005.

Full text

APA, Harvard, Vancouver, ISO, and other styles

31

Ivanić, Ivana. "Slitine s prisjetljivosti oblika (II. dio): podjela, proizvodnja i primjena." Kemija u industriji 63, no. 9-10 (2014): 331–44. http://dx.doi.org/10.15255/kui.2013.017.

Full text

APA, Harvard, Vancouver, ISO, and other styles

32

Ding, Mang, Di Ping Wu, and Qin Qin. "Finite Element Modeling of Shear-Slitting Process." Advanced Materials Research 459 (January 2012): 3–6. http://dx.doi.org/10.4028/www.scientific.net/amr.459.3.

Full text

Abstract:

Shear-slitting is a sheet metal cutting process used for dividing coiled sheet into narrower coils. In this paper, a two-dimensional finite element model was developed for the calculation of the shear-slitting process by using ABAQUS/Explicit. The shear failure criteria and the element-delete method were adopted to model the material separation. Mass scaling was used to reduce the solution time. The effect of clearance on the burr height was investigated. The simulation results show good agreement with experimental results. The critical clearance values was suggested for decreasing the burr.

APA, Harvard, Vancouver, ISO, and other styles

33

Frumuşanu, Gabriel, Virgil Teodor, and Nicolae Oancea. "Graphical Method in CATIA to Profile the Hob Mill for Generating the Slitting Saw Cutter Teeth." Applied Mechanics and Materials 811 (November 2015): 85–91. http://dx.doi.org/10.4028/www.scientific.net/amm.811.85.

Full text

Abstract:

The generation of the ordinate surfaces whirl attached to a centrode (e.g. cylindrical or helical gears teeth generation) with a hob mill is an efficient method, also recommended in machining the teeth of slitting saw cutter with high dimensions. Profiling the hob mill conjugated to the disc-tool (slitting saw cutter) teeth, depending on its tooth profile, is a specific problem. There are known both analytical methods to profile the hob mill – e.g. the Gohman method (which uses an intermediary surface – the reference rack-gear), and graphical methods (developed in AutoCAD). A profiling method,

APA, Harvard, Vancouver, ISO, and other styles

34

Meehan, R. R., and S. J. Burns. "Mechanics of slitting and cutting webs." Experimental Mechanics 38, no. 2 (1998): 103–9. http://dx.doi.org/10.1007/bf02321652.

Full text

APA, Harvard, Vancouver, ISO, and other styles

35

Strycharska, Dominika, Sebastian Mróz, and Piotr Szota. "Influence of the slitting passes system on the slitting pass wear during the bars rolling process." Mechanik 90, no. 1 (2017): 78–79. http://dx.doi.org/10.17814/mechanik.2017.1.21.

Full text

Abstract:

An analysis of the roll wear in the multi-strand rolling of reinforced ribbed bars has been made in the study. For the computer simulations were used two slitting pass system. For determining the wear of the passes, the results of numerical computation of unit friction force work done using the Forge2011® software program.

APA, Harvard, Vancouver, ISO, and other styles

36

Chen, Heng, Hongmei Cheng, Aibin Xu, Yi Xue, and Weihong Peng. "The impact of drilling and slitting construction on damage field: evolution characteristics in low-permeability coal seam." Journal of Mechanics 37 (2021): 205–15. http://dx.doi.org/10.1093/jom/ufaa021.

Full text

Abstract:

ABSTRACT The fracture field of coal and rock mass is the main channel for gas migration and accumulation. Exploring the evolution law of fracture field of coal and rock mass under the condition of drilling and slitting construction has important theoretical significance for guiding efficient gas drainage. The generation and evolution process of coal and rock fissures is also the development and accumulation process of its damage. Therefore, based on damage mechanics and finite element theory, the mathematical model is established. The damage variable of coal mass is defined by effective strain

APA, Harvard, Vancouver, ISO, and other styles

37

Strycharska, Dominika. "Analysis of Roll Wear Costs During Multi-Strand Rolling of Ribbed Bars Using New Slitting Pass System." New Trends in Production Engineering 2, no. 2 (2019): 267–78. http://dx.doi.org/10.2478/ntpe-2019-0091.

Full text

Abstract:

Abstract The paper presents a modification of the slitting pass system, which ensured a reduction in roll wear during three-strand rolling of ribbed bars with a diameter of 16 mm, and thus reduced the associated costs. The theoretical and experimental research on the rolling process of ribbed bars with a diameter of 16 mm rolled in three-strand technology was carried out on a D350 18-stand continuous bar rolling mill conditions. To determine the cost of slitting pass wear, the results of numerical calculations of the frictional force unit of work obtained using the Forge2011® computer program

APA, Harvard, Vancouver, ISO, and other styles

38

LU, Jiabin. "Formation Mechanism of Disc Slitting Surface Morphology." Journal of Mechanical Engineering 50, no. 11 (2014): 178. http://dx.doi.org/10.3901/jme.2014.11.178.

Full text

APA, Harvard, Vancouver, ISO, and other styles

39

Hsieh, Y. C. "Alternative Approaches for One-Dimensional Slitting Problems." Journal of the Operational Research Society 48, no. 3 (1997): 314. http://dx.doi.org/10.2307/3010430.

Full text

APA, Harvard, Vancouver, ISO, and other styles

40

Ding, Mang, Di Ping Wu, and Qin Qin. "Finite Element Modeling of Shear-Slitting Process." Advanced Materials Research 459 (January 2012): 3–6. http://dx.doi.org/10.4028/scientific5/amr.459.3.

Full text

APA, Harvard, Vancouver, ISO, and other styles

41

Hsieh, Y.-C. "Alternative approaches for one-dimensional slitting problems." Journal of the Operational Research Society 48, no. 3 (1997): 314–18. http://dx.doi.org/10.1038/sj.jors.2600379.

Full text

APA, Harvard, Vancouver, ISO, and other styles

42

Hsieh, Y.-C. "Alternative approaches for one-dimensional slitting problems." Journal of the Operational Research Society 48, no. 3 (1997): 314–18. http://dx.doi.org/10.1057/palgrave.jors.2600379.

Full text

APA, Harvard, Vancouver, ISO, and other styles

43

Bohdal, Łukasz, Leon Kukiełka, Stanisław Legutko, Radosław Patyk, and Andrii M. Radchenko. "Modeling and Experimental Analysis of Shear-Slitting of AA6111-T4 Aluminum Alloy Sheet." Materials 13, no. 14 (2020): 3175. http://dx.doi.org/10.3390/ma13143175.

Full text

Abstract:

This work presents experimental studies with numerical modeling, aiming at the development of guidelines for shaping aluminum alloy AA6111-T4, t = 1.5 mm thick, with the use of a shear-slitting operation. During the experimental tests, parametric analyses were conducted for the selected material thickness. For the purposes of the material deformation’s analysis, a vision system based on the digital image correlation (DiC) method was used. Numerical models were developed with the use of finite element analysis (FEA) and the mesh-free method: smoothed particle hydrodynamics (SPH), which were use

APA, Harvard, Vancouver, ISO, and other styles

44

Bohdal, Łukasz, Katarzyna Tandecka, and Paweł Kałduński. "Numerical Simulation of Shear Slitting Process of Grain Oriented Silicon Steel using SPH Method." Acta Mechanica et Automatica 11, no. 4 (2017): 333–38. http://dx.doi.org/10.1515/ama-2017-0052.

Full text

Abstract:

AbstractMechanical cutting allows separating of sheet material at low cost and therefore remains the most popular way to produce laminations for electrical machines and transformers. However, recent investigations revealed the deteriorating effect of cutting on the magnetic properties of the material close to the cut edge. The deformations generate elastic stresses in zones adjacent to the area of plastically deformed and strongly affect the magnetic properties. The knowledge about residual stresses is necessary in designing the process. This paper presents the new apprach of modeling residual

APA, Harvard, Vancouver, ISO, and other styles

45

Herkenrath, Hainz. "Is Your Slitting System Cutting into Your Profits?" JAPAN TAPPI JOURNAL 59, no. 11 (2005): 1680–83. http://dx.doi.org/10.2524/jtappij.59.1680.

Full text

APA, Harvard, Vancouver, ISO, and other styles

46

Miller, Ian. "Rolling to Mechanisation: Excavations at Lymm Slitting Mill." Industrial Archaeology Review 41, no. 2 (2019): 107–21. http://dx.doi.org/10.1080/03090728.2019.1665900.

Full text

APA, Harvard, Vancouver, ISO, and other styles

47

Chun, Sang Hoo, Jin Sun Bok, Jae Woo Park, and Du Hwan Chun. "Durability Test of Slitting Belt for Belt Bridle." Textile Science and Engineering 52, no. 3 (2015): 167–71. http://dx.doi.org/10.12772/tse.2015.52.167.

Full text

APA, Harvard, Vancouver, ISO, and other styles

48

Strycharska, D., P. Szota, and S. Mróz. "Increasing the Durability of Separating Rolls During Rolling Ribbed Bars in the Three-Strand Technology." Archives of Metallurgy and Materials 62, no. 3 (2017): 1535–40. http://dx.doi.org/10.1515/amm-2017-0236.

Full text

Abstract:

Abstract The paper presents the results of investigations aimed at enhancing the durability of slitting passes in the process of three-strand rolling of 16 mm-diameter ribbed bars. Using the Forge2011® computer program, numerical modelling of the rolling process was carried out in order to examine the variations in band shape in individual rolling passes, to verify the correctness of the designed new slitting pass system, to determine the local strains in the rolled band, and then to determine the distribution of unit friction force work on the roll groove surface. From the obtained investigat

APA, Harvard, Vancouver, ISO, and other styles

49

Kim, Young-Hwan, Yung-Zun Cho, Young-Soon Lee, and Jin-Mok Hur. "Engineering Design of a Mechanical Decladder for Spent Nuclear Rod-Cuts." Science and Technology of Nuclear Installations 2019 (August 14, 2019): 1–16. http://dx.doi.org/10.1155/2019/9273503.

Full text

Abstract:

A practical scale mechanical decladder that can slit spent nuclear fuel rod-cuts (hulls + pellets) of several tens of kg HM/batch is being developed to supply UO2 pellets to a voloxidation process. The mechanical decladder is an apparatus for separating and recovering fuel material and cladding tubes by horizontally slitting the cladding tube of a fuel rod and a defective irradiated fuel rod. In this study, we address the engineering design of the mechanical decladder for the pretesting of rod-cut slitting. To obtain the requirements of the mechanical decladder, we first manufactured a slitter

APA, Harvard, Vancouver, ISO, and other styles

50

Kim, Young-Hwan, Yung-Zun Cho, and Jin-Mok Hur. "Experimental Approaches for Manufacturing of Simulated Cladding and Simulated Fuel Rod for Mechanical Decladder." Science and Technology of Nuclear Installations 2020 (January 24, 2020): 1–12. http://dx.doi.org/10.1155/2020/1905019.

Full text

Abstract:

We are developing a practical-scale mechanical decladder that can slit nuclear spent fuel rod-cuts (hulls + pellets) on the order of several tens of kgf of heavy metal/batch to supply UO2 pellets to a voloxidation process. The mechanical decladder is used for separating and recovering nuclear fuel material from the cladding tube by horizontally slitting the cladding tube of a fuel rod. The Korea Atomic Energy Research Institute (KAERI) is improving the performance of the mechanical decladder to increase the recovery rate of pellets from spent fuel rods. However, because actual nuclear spent fu

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!