Log in

Relevant bibliographies by topics / Slot insulation / Journal articles

To see the other types of publications on this topic, follow the link: Slot insulation.

Journal articles on the topic 'Slot insulation'

Author: Grafiati

Published: 4 June 2021

Last updated: 8 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 journal articles for your research on the topic 'Slot insulation.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

Azizi, D., and A. Gholami. "Optimum Scheme for Insulation System in HV Generator Based on Electromagnetic Analysis." Engineering, Technology & Applied Science Research 1, no. 3 (2011): 49–53. http://dx.doi.org/10.48084/etasr.14.

Full text

Abstract:

Electrical insulations are one of the basic parts of electrical machinery in any sizes and characteristics. Focusing on insulating, studies on the operation of industrial-electrical machinery came to the fact that the most important part of a machine is the Stator. This fact reveals the requirement for inspection of the electrical machine insulation along with the electromagnetic tensions. Therefore with respect to insulation system improvement of stator, the HV generator can be optimized. Dielectric parameters such as insulation thickness, spacing, material types, geometry of winding and slot

APA, Harvard, Vancouver, ISO, and other styles

2

Lecointe, Jean-Philippe, Stéphane Duchesne, Dorin Cozonac, Gabriel Vélu, and Krzysztof Komeza. "High temperature machine: Characterization of materials for the electrical insulation." Open Physics 18, no. 1 (2020): 674–82. http://dx.doi.org/10.1515/phys-2020-0109.

Full text

Abstract:

AbstractThis paper aims to present and analyze the materials adapted to design a machine that can work with a high current density without any specific cooling system. In other words, the machine is equipped with material that supports high internal temperature, about 500°C. Candidate materials are selected and the authors indicate that inorganic insulation should be preferred for conductors and slot insulations. Tests are carried out on material selection through measurement of the turn-to-turn voltage, insulation resistances, and the parallel capacitances.

APA, Harvard, Vancouver, ISO, and other styles

3

Liu, Yi. "Decorative Mortise Slot Insulation Board Exterior Insulation System Integration and Quality Control of Construction Elements." Applied Mechanics and Materials 71-78 (July 2011): 4160–65. http://dx.doi.org/10.4028/www.scientific.net/amm.71-78.4160.

Full text

Abstract:

This paper used for exterior insulation system, a new form - decorative mortise slot insulation board exterior insulation systems integration, construction technology, a careful study and discussion, and through concrete examples and practical engineering Construction, operation points of the construction and quality control.

APA, Harvard, Vancouver, ISO, and other styles

4

Leonov, A. "IMPROVING THE HEAT RESISTANCE OF POLYMER ELECTRICAL INSULATION SYSTEMS FOR THE MODERNIZATION OF INDUCTION MOTORS." Eurasian Physical Technical Journal 18, no. 1 (2021): 34–42. http://dx.doi.org/10.31489/2021no1/34-42.

Full text

Abstract:

Ensuring high power, efficiency and reliability of induction motor operation while providing small weight– size parameters represents an up-to-date problem. One of the factors limiting the reduction of weight–size parameters when increasing capacities of induction motors is the failure of the insulation system. Therefore, there is a strong need for studying the issues of slot fill when designing an induction motor, taking into account an increase in the heat resistance class of electrical insulation systems. The purpose of the present research is to develop a polymeric electrical insulation sy

APA, Harvard, Vancouver, ISO, and other styles

5

Tien, H. C., and K. Vafai. "Pressure Stratification Effects on Multiphase Transport Across a Vertical Slot Porous Insulation." Journal of Heat Transfer 112, no. 4 (1990): 1023–31. http://dx.doi.org/10.1115/1.2910474.

Full text

Abstract:

In this work, thermal stratification effects on heat and mass transfer in a porous insulation are analyzed. The vertical boundaries of the porous system are partially permeable for simulating holes or cracks in wall. Hydrostatic pressure variations are considered on the vertical boundaries and a set of realistic boundary conditions is imposed on the system under consideration. The transient intercoupled equations governing the complicated transport process along with the convective boundary conditions are solved by an efficient numerical scheme. The dependence of the Nusselt number and the fie

APA, Harvard, Vancouver, ISO, and other styles

6

Li, Wei Li, Zhen Xing Wu, and Fei Yang Huo. "Influence of Main Insulation Thermal Aging on Stator Temperature Field in Large Turbo-Generator." Advanced Materials Research 433-440 (January 2012): 7505–10. http://dx.doi.org/10.4028/www.scientific.net/amr.433-440.7505.

Full text

Abstract:

The eddy current loss of stator strands in the in-phase slot and out-phase slot was calculated by the finite element method (FEM). 3D static heat transfer equations and equivalent variation equations of large turbo-generator under the Cartesian coordinates system were given. The stator temperature field of large turbo-generator was calculated by using 3D FEM, and the influence of thermal conductivity reduced due to main insulation aging both in in-phase slot and out-phase slot on the stator was analyzed. The obtained conclusions will provide theoretical basis for fault prediction and fault dia

APA, Harvard, Vancouver, ISO, and other styles

7

Nurzyński, Jacek. "Empirical Study on the Sound Insulation of Simple Slot Ventilators." Building Acoustics 13, no. 3 (2006): 223–41. http://dx.doi.org/10.1260/135101006778605406.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Andreev, A. M., A. Sh Azizov, I. A. Andreev, A. N. Smirnov, A. A. Stepanov, and G. A. Nazarov. "Particularities of measuring partial discharges in stator windings insulation systems of high-voltage electrical machines." Safety and Reliability of Power Industry 14, no. 1 (2021): 61–68. http://dx.doi.org/10.24223/1999-5555-2021-14-1-61-68.

Full text

Abstract:

The purpose of the article is to provide potential tools that can make a significant contribution to the identification of partial discharges (PD). Different types of partial discharges occur in stator winding insulation and a few partial discharges may occur simultaneously. Internal partial discharges are electrical discharges that occur in voids in the insulation of the stator winding. In typical stator insulation systems that use epoxy bonded mica tapes, insulation degradation due to internal partial discharges is usually slow (many years or decades). External partial discharges (slot PD an

APA, Harvard, Vancouver, ISO, and other styles

9

Melnichenko, A. P., A. V. Papkov, and V. M. Pak. "Development of rotor slot insulation for turbogenerators with high electrical and mechanical characteristics." Russian Electrical Engineering 82, no. 4 (2011): 197–98. http://dx.doi.org/10.3103/s1068371211040092.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Stefe, Blaz, and Marjan Jenko. "Modeling of Insulation Paper Damage in the Assembly of a Solid Slot Winding." IEEE Access 8 (2020): 27831–50. http://dx.doi.org/10.1109/access.2020.2971678.

Full text

APA, Harvard, Vancouver, ISO, and other styles

11

Montisci, Giorgio, Zusheng Jin, Mingchao Li, et al. "Design of Multilayer Dielectric Cover to Enhance Gain and Efficiency of Slot Arrays." International Journal of Antennas and Propagation 2013 (2013): 1–6. http://dx.doi.org/10.1155/2013/917676.

Full text

Abstract:

An effective design procedure, based on the Elliot synthesis method, is proposed to investigate the properties of waveguide slot arrays with multilayer dielectric cover. Then, the features of the designed arrays are analyzed by means of a FEM commercial software, namely, Ansys HFSS 13. We show how a proper choice of the dielectric cover configuration allows increasing the array gain and aperture efficiency, while taking advantage of the properties of the radome structure, in terms of insulation, protection, and pressurization of the radiating waveguides. Therefore, a significant outcome of the

APA, Harvard, Vancouver, ISO, and other styles

12

Nair, Ramesh P., Sumangala B. Vishwanath, and Nageshwar B. Rao. "Identification of slot discharges in rotating machine insulation system using variable frequency PD measurement." High Voltage 3, no. 3 (2018): 179–86. http://dx.doi.org/10.1049/hve.2017.0176.

Full text

APA, Harvard, Vancouver, ISO, and other styles

13

Azizi, Diako, and Ahmad Gholami. "Optimization of semiconductive coating and groundwall insulation layers in stator slot of HV generator." International Journal of Electrical Power & Energy Systems 57 (May 2014): 384–91. http://dx.doi.org/10.1016/j.ijepes.2013.12.018.

Full text

APA, Harvard, Vancouver, ISO, and other styles

14

Song, Jiancheng, Chuanyang Li, Lingyan Lin, Zhipeng Lei, Xiaoyu Bi, and Haoyuan Yang. "Slot discharge pattern of 10 kV induction motor stator coils under condition of insulation degradation." IEEE Transactions on Dielectrics and Electrical Insulation 20, no. 6 (2013): 2091–98. http://dx.doi.org/10.1109/tdei.2013.6678857.

Full text

APA, Harvard, Vancouver, ISO, and other styles

15

Ma, Gao, Liang Huang, Libo Yan, Hui Wang, and Peng Yin. "Flexural and Thermal Properties of Novel Energy Conservation Slotted Reinforced Concrete Beams." Advances in Materials Science and Engineering 2016 (2016): 1–14. http://dx.doi.org/10.1155/2016/4642810.

Full text

Abstract:

Conventional solid reinforced concrete (RC) beams were modified to slotted beams for consideration as thermal insulation structural components. The slotted beam consisted of an outer and an inner beam, respectively, with a slot located near the middle of the beam along its width direction for filling thermal insulation material. Flexural and thermal behavior of the slotted beams were investigated. Three RC reference solid beams and six slotted beams were fabricated and tested under four-point bending tests. The test results indicated that the failure mode of both slotted beams and the solid be

APA, Harvard, Vancouver, ISO, and other styles

16

Mikołajewicz, Jacek. "The impact of speed as well as selected parameters of slot insulation on the distribution of temperature in linear motion converters." Archives of Electrical Engineering 65, no. 4 (2016): 855–64. http://dx.doi.org/10.1515/aee-2016-0060.

Full text

Abstract:

Abstract This paper presents and discusses the mathematical model of thermal phenomena occurring in axis-symmetric electromechanical linear motion converters. On the basis of the developed model, software to analyze the process of the heating up of this type of converters, was created. The effect of the thickness and type of material of the slot insulation, as well as the speed of the runner on the temperature distribution in the analyzed object was examined in-depth. Selected results of simulated calculations have been presented.

APA, Harvard, Vancouver, ISO, and other styles

17

Sui, Yi, Ping Zheng, Peilun Tang, Fan Wu, and Pengfei Wang. "A five-phase 20-slot/18-pole PMSM for electric vehicles." COMPEL: The International Journal for Computation and Mathematics in Electrical and Electronic Engineering 35, no. 2 (2016): 439–55. http://dx.doi.org/10.1108/compel-02-2015-0106.

Full text

Abstract:

Purpose – The purpose of this paper is to investigate a five-phase permanent-magnet synchronous machine (PMSM) that features high-power density and high-fault-tolerant capability for electric vehicles (EVs). Design/methodology/approach – The five-phase 20-slot/18-pole PMSM is designed by finite-element method. Two typical rotor structures which include Halbach array and rotor eccentricity are compared to achieve sinusoidal back electromotive force (EMF). The influence of slot dimensions on leakage inductance and short-circuit current is analyzed. The method to reduce eddy current loss of perma

APA, Harvard, Vancouver, ISO, and other styles

18

Kim, Myong-Jin. "Numerical study for increasement of low frequency sound insulation of double-panel structure using sonic crystals with distributed Helmholtz resonators." International Journal of Modern Physics B 33, no. 14 (2019): 1950138. http://dx.doi.org/10.1142/s0217979219501388.

Full text

Abstract:

Numerical simulations of the sound transmission loss (STL) of a double-panel structure (DPS) with sonic crystal (SC) comprised of distributed local resonators are presented. The Local Resonant Sonic Crystal (LRSC) consists of “C”-shaped Helmholtz resonator columns with different resonant frequencies. The finite element method is used to calculate the STL of such a DPS. First, the STLs of LRSC in free space and the DPS with LRSC are calculated and compared. It is shown that the sound insulations of the local resonators inserted in the double panel are higher than that in free space for the same

APA, Harvard, Vancouver, ISO, and other styles

19

Tang, Gui-Ji, Hong-Chun Jiang, Yu-Ling He, and Qing-Fa Meng. "Electromagnetic Forces and Mechanical Responses of Stator Windings before and after Rotor Interturn Short Circuit in Synchronous Generators." Mathematical Problems in Engineering 2020 (December 30, 2020): 1–19. http://dx.doi.org/10.1155/2020/5892312.

Full text

Abstract:

This paper studies the stator winding electromagnetic force behaviors before and after rotor inter-turn short circuit (RISC) in synchronous generator. Different from other studies, this paper not only studies the electromagnetic force characteristics, but also investigates the mechanical responses, the damage regularity, and the countermeasure of the stator winding. Firstly, formulas of electromagnetic force online and end part are obtained. Then, a 3D finite element model of a 3-pair-pole simulation generator is applied to get the electromagnetic force, and the dangerous stator slot is found.

APA, Harvard, Vancouver, ISO, and other styles

20

Vostrov, K., V. Frolov, V. Shestakov, E. Popkov, and A. D. Mitrofanov. "Influence of material and thickness of slot insulation of the electric machine on the bearing voltage ratio." IOP Conference Series: Earth and Environmental Science 337 (November 16, 2019): 012043. http://dx.doi.org/10.1088/1755-1315/337/1/012043.

Full text

APA, Harvard, Vancouver, ISO, and other styles

21

Azizi, Diako, and Ahmad Gholami. "Multiobjective optimization of stator slot insulation of high-voltage generator based on coupled SNOPT-finite element method analysis." IEEE Electrical Insulation Magazine 29, no. 2 (2013): 69–76. http://dx.doi.org/10.1109/mei.2013.6457601.

Full text

APA, Harvard, Vancouver, ISO, and other styles

22

Moeikham, Pichet, Chatree Mahatthanajatuphat, and Prayoot Akkaraekthalin. "A Compact UWB Antenna with a Quarter-Wavelength Strip in a Rectangular Slot for 5.5 GHz Band Notch." International Journal of Antennas and Propagation 2013 (2013): 1–9. http://dx.doi.org/10.1155/2013/574128.

Full text

Abstract:

The limitation of the electromagnetic interferences (EMIs) caused by UWB radiating sources into WLAN/WiMAX communication systems operating in the frequency band located around 5.5 GHz requires the adoption of appropriate design features. To this purpose, a notch filter integrated into an UWB antenna, which is able to ensure a better electrical insulation between the two mentioned communication systems with respect to that already presented by the authors Moeikham et al. (2011), is proposed in this paper. The proposed filter, consisting in a rectangular slot including a quarter-wavelength strip

APA, Harvard, Vancouver, ISO, and other styles

23

Usachev, A. E., and A. Yu Kubarev. "Problems of Insulation Diagnostics of Power Equipment by the Method of Partial Discharges." E3S Web of Conferences 288 (2021): 01077. http://dx.doi.org/10.1051/e3sconf/202128801077.

Full text

Abstract:

Target. High information value and reliability of diagnostics of isolation by partial discharges. Methods. Simulation of PD in Multisim and calculation of electrical fields of insulation defects by finite element method in the program ComSol. Results. A strong influence of the power supply on the value of voltage surge in case of emergency has been established. The method of adjustment of this influence is proposed. It was found that the oscillatory form of the PD is mainly determined not by the parameters of the insulation defect, but by the parameters of the energy object in which this defec

APA, Harvard, Vancouver, ISO, and other styles

24

Oh, Tae Sik, Seok Joon Jang, and Hyun Do Yun. "Shear Reinforcing Influence of GFRP Shear Connectors in the Concrete Sandwich Wall Panel (CSWP) for Exterior Envelopes of Buildings." Advanced Materials Research 658 (January 2013): 38–41. http://dx.doi.org/10.4028/www.scientific.net/amr.658.38.

Full text

Abstract:

This paper summarizes the experimental results of concrete sandwich wall panels (CSWP)specimens under pull-out loading conducted to investigate the effect of insulation type and reinforcing area of shear connector made with glass fiber-reinforced polymer (GFRP) on the shear behavior of CSWP used as exterior cladding walls.In this study, two types of thermal insulations;expanded polystyrene(EPS)and extruded polystyrene with special slots(XPSS) and wave-shaped GFRP shear connectors with different reinforcing area; 6mm x 2mm and 12mm x 2mm were used for CSWP specimens.Test results indicated that

APA, Harvard, Vancouver, ISO, and other styles

25

Widodo, Kukuh, Muhamad Haddin, and Gunawan Gunawan. "Analisis Partial Discharge dan Prediksi Usia Layak Isolasi Belitan Stator Generator 143,4 MVA." Energi & Kelistrikan 12, no. 1 (2020): 53–64. http://dx.doi.org/10.33322/energi.v12i1.927.

Full text

Abstract:

ABSTRACT The arise of partial discharge in isolation of the winding stator generator is thing that general because existence ageing and excessive stress. Partial discharge in isolation of the winding stator occur in the core slot area or endwinding area. The problem that occur in isolation of the winding stator generator is the presence of corona and high partial discharge in the endwinding area caused by ineffective monitoring of partial discharge. This research discusses about that occurrence corona and partial discharge, and the effectiveness of repairing insulation of the stator wind

APA, Harvard, Vancouver, ISO, and other styles

26

Timusk, J., and H. B. Doshi. "Effect of insulating sheathing on heat and moisture flow." Canadian Journal of Civil Engineering 13, no. 6 (1986): 674–80. http://dx.doi.org/10.1139/l86-102.

Full text

Abstract:

Wood-frame walls with low and high water vapour permeance insulating sheathings were tested in a climate simulator with respect to moisture and thermal performance. Exfiltration of moist interior air through the walls was simulated by pumping moist air into wall cavities from the warm side of the climate simulator where the walls were tested. It was found that ventilation slots in extruded polystyrene sheathing did not improve the drying ability of the walls. Incomplete filling of wall cavities with glass-fibre batt insulation, the presence of ventilation slots, and temperature difference acro

APA, Harvard, Vancouver, ISO, and other styles

27

Kraynov, Dmitriy, and Galina Medvedeva. "Research of thermal performance properties of the wall construction products made of materials using heat power engineering waste." E3S Web of Conferences 274 (2021): 07001. http://dx.doi.org/10.1051/e3sconf/202127407001.

Full text

Abstract:

A technology for the utilization of technogenic waste from the oil and gas industrial complex (sulfur) and ash and slag waste from the combined heat and power plant for the manufacture of thermal insulation material with high strength and performance properties has been developed. A technological scheme is proposed. The optimal parameters and composition of the obtained thermal insulation materials have been determined. A numerical method for determining the thermal conductivity coefficient of a building product based on the calculation of a stationary temperature field is considered. The depe

APA, Harvard, Vancouver, ISO, and other styles

28

Di Giuseppe, Alessia, Alberto Maria Gambelli, Federico Rossi, Andrea Nicolini, Nicola Ceccarelli, and Alberto Palliotti. "Insulating Organic Material as a Protection System against Late Frost Damages on the Vine Shoots." Sustainability 12, no. 15 (2020): 6279. http://dx.doi.org/10.3390/su12156279.

Full text

Abstract:

Late frosts are one of the major impact factors on agriculture worldwide with large economic losses for agricultural crops, with a significant impact also in wine production. Given the importance of the wine sector in the world, more and more efforts are being made to identify innovative techniques capable of creating a low-cost and effective protection for vine shoots, as well as reducing energy consumption. In a previous work, cotton candy was identified as an insulating material to solve the problems related to late frosts on vineyards and limit its damages as much as possible. From the res

APA, Harvard, Vancouver, ISO, and other styles

29

Kong, Deqing, and Makoto Tsubokawa. "Evaluation of slot-to-slot coupling between dielectric slot waveguides and metal-insulator-metal slot waveguides." Optics Express 23, no. 15 (2015): 19082. http://dx.doi.org/10.1364/oe.23.019082.

Full text

APA, Harvard, Vancouver, ISO, and other styles

30

Tian, Huiping, Jian Zhou, Yi Zhai, and Yuefeng Ji. "Flat Band Slow Light Performance in Dual-Slot Silicon-on-Insulator Based Photonic Crystal Waveguide." Japanese Journal of Applied Physics 52, no. 3R (2013): 032001. http://dx.doi.org/10.7567/jjap.52.032001.

Full text

APA, Harvard, Vancouver, ISO, and other styles

31

Fitrakis, Emmanouil-Panagiotis, Thomas Kamalakis, and Thomas Sphicopoulos. "Slow light in insulator–metal–insulator plasmonic waveguides." Journal of the Optical Society of America B 28, no. 9 (2011): 2159. http://dx.doi.org/10.1364/josab.28.002159.

Full text

APA, Harvard, Vancouver, ISO, and other styles

32

Hainberger, Rainer. "Structural Optimization of Silicon-On-Insulator Slot Waveguides." IEEE Photonics Technology Letters 18, no. 24 (2006): 2557–59. http://dx.doi.org/10.1109/lpt.2006.886974.

Full text

APA, Harvard, Vancouver, ISO, and other styles

33

Kaushika, N. "Transparent insulation characteristics of honeycomb and slat arrays." Energy 19, no. 10 (1994): 1037–41. http://dx.doi.org/10.1016/0360-5442(94)90091-4.

Full text

APA, Harvard, Vancouver, ISO, and other styles

34

Zhu, Shiyang, G. Q. Lo, and D. L. Kwong. "Electro-absorption modulation in horizontal metal-insulator-silicon-insulator-metal nanoplasmonic slot waveguides." Applied Physics Letters 99, no. 15 (2011): 151114. http://dx.doi.org/10.1063/1.3653240.

Full text

APA, Harvard, Vancouver, ISO, and other styles

35

Ma, Zhonghua, and Yanfeng Jiang. "High-Density 3D Printable Chipless RFID Tag with Structure of Passive Slot Rings." Sensors 19, no. 11 (2019): 2535. http://dx.doi.org/10.3390/s19112535.

Full text

Abstract:

A three-dimensional (3D) printable chipless radio frequency identification (RFID) tag, with high density and sensitivity, is proposed and fulfilled on insulator substrates. By printing a rectangular slot ring and designing specific geometry on the substrate, the printed structure shows high sensitivity in a resonant manner, with the benefits of high density and low cost. Considering the multiple rectangular rings with different sizes in a concentric distribution, a bit coding sequence can be observed in frequency spectra because of the corresponding different resonant frequencies aroused by th

APA, Harvard, Vancouver, ISO, and other styles

36

Qiu, Feng, Andrew M. Spring, Jianxun Hong, and Shiyoshi Yokoyama. "Plate-slot polymer waveguide modulator on silicon-on-insulator." Optics Express 26, no. 9 (2018): 11213. http://dx.doi.org/10.1364/oe.26.011213.

Full text

APA, Harvard, Vancouver, ISO, and other styles

37

Ding, Y., X. Guan, X. Zhu, et al. "Efficient electro-optic modulation in low-loss graphene-plasmonic slot waveguides." Nanoscale 9, no. 40 (2017): 15576–81. http://dx.doi.org/10.1039/c7nr05994a.

Full text

Abstract:

Surface plasmon polaritons enable light concentration within subwavelength regions, and here we demonstrate efficient and compact graphene-plasmonic modulators fully integrated in the silicon-on-insulator platform.

APA, Harvard, Vancouver, ISO, and other styles

38

Neumann, A. "Slow domains in semi-insulating GaAs." Journal of Applied Physics 90, no. 1 (2001): 1–26. http://dx.doi.org/10.1063/1.1377023.

Full text

APA, Harvard, Vancouver, ISO, and other styles

39

Fitrakis, E. P., Thomas Kamalakis, and Thomas Sphicopoulos. "Slow-light dark solitons in insulator–insulator–metal plasmonic waveguides." Journal of the Optical Society of America B 27, no. 9 (2010): 1701. http://dx.doi.org/10.1364/josab.27.001701.

Full text

APA, Harvard, Vancouver, ISO, and other styles

40

Ding, Ran, Tom Baehr-Jones, Woo-Joong Kim, et al. "Low-loss strip-loaded slot waveguides in Silicon-on-Insulator." Optics Express 18, no. 24 (2010): 25061. http://dx.doi.org/10.1364/oe.18.025061.

Full text

APA, Harvard, Vancouver, ISO, and other styles

41

Fabiani, Davide, and Simone Vincenzo Suraci. "Broadband Dielectric Spectroscopy: A Viable Technique for Aging Assessment of Low-Voltage Cable Insulation Used in Nuclear Power Plants." Polymers 13, no. 4 (2021): 494. http://dx.doi.org/10.3390/polym13040494.

Full text

Abstract:

This paper deals with the study of a non-destructive technique to detect the aging state of cable insulation used in a nuclear environment subjected to radiation and temperature aging. Cable samples were aged under dose rates ranging from 0.42 and 1.06 kGy/h at 55 and 85 °C. The imaginary part of the permittivity at 100 kHz is found to correlate well with mechanical properties, such as elongation at break, which is typically used to diagnose cable insulation, but it is a destructive property and cannot be used on field. It has been demonstrated also that a post-irradiation effect occurs even y

APA, Harvard, Vancouver, ISO, and other styles

42

Тарасов, М. А., С. Махашабде, А. А. Гунбина та ін. "СИНИС-болометр с микроволновым считыванием". Физика твердого тела 62, № 9 (2020): 1415. http://dx.doi.org/10.21883/ftt.2020.09.49763.17h.

Full text

Abstract:

We have designed, fabricated, and experimentally studied a Superconductor-Insulator-Normal Metal-Insulator-Superconductor (SINIS) bolometer integrated in a twin-slot antenna with central frequency of 90 GHz and connected to a superconducting coplanar readout resonator. Such single pixel is intended for multichannel matrix of high-sensitive receiver for radioastronomy, in which readout of many channels is arranged via single coaxial cable instead of separate wires and separate amplifiers for each channel.

APA, Harvard, Vancouver, ISO, and other styles

43

Kennett, Malcolm P. "Out-of-Equilibrium Dynamics of the Bose-Hubbard Model." ISRN Condensed Matter Physics 2013 (June 12, 2013): 1–39. http://dx.doi.org/10.1155/2013/393616.

Full text

Abstract:

The Bose-Hubbard model is the simplest model of interacting bosons on a lattice. It has recently been the focus of much attention due to the realization of this model with cold atoms in an optical lattice. The ability to tune parameters in the Hamiltonian as a function of time in cold atom systems has opened up the possibility of studying out-of-equilibrium dynamics, including crossing the quantum critical region of the model in a controlled way. In this paper, I give a brief introduction to the Bose Hubbard model, and its experimental realization and then give an account of theoretical and ex

APA, Harvard, Vancouver, ISO, and other styles

44

Ding, Ran, Tom Baehr-Jones, Woo-Joong Kim, et al. "Low-loss asymmetric strip-loaded slot waveguides in silicon-on-insulator." Applied Physics Letters 98, no. 23 (2011): 233303. http://dx.doi.org/10.1063/1.3597798.

Full text

APA, Harvard, Vancouver, ISO, and other styles

45

Baehr-Jones, Tom, Michael Hochberg, Chris Walker, and Axel Scherer. "High-Q optical resonators in silicon-on-insulator-based slot waveguides." Applied Physics Letters 86, no. 8 (2005): 081101. http://dx.doi.org/10.1063/1.1871360.

Full text

APA, Harvard, Vancouver, ISO, and other styles

46

Sun, Lin, Jicheng Wang, Zheng-Da Hu, Xiaosai Wang, and Jing Chen. "Plasmonic analog of electromagnetically-induced transparency of asymmetrical slots waveguide." Modern Physics Letters B 30, no. 05 (2016): 1650045. http://dx.doi.org/10.1142/s0217984916500457.

Full text

Abstract:

In this paper, electromagnetically-induced transparency (EIT) phenomena have been investigated numerically in the plasmonic waveguides composed of unsymmetrical slot shaped metal–insulator–metal (MIM) structures. By the transmission line theory and Fabry–Perot model, the formation and evolution mechanisms of plasmon-induced transparency were exactly analyzed. The analysis showed that the peak of EIT-like transmission could be changed easily according to certain rules by adjusting the geometrical parameters of the slot structures, including the coupling distances and slot depths. We can find a

APA, Harvard, Vancouver, ISO, and other styles

47

Kim, Hye Ran, Dae Hyun Kang, and Hyun Do Yun. "Influence of Insulation Type on In-Plane Shear Behavior of Insulated Concrete Sandwich Panels (ICSP) with GFRP Grid Shear Connectors." Applied Mechanics and Materials 525 (February 2014): 416–19. http://dx.doi.org/10.4028/www.scientific.net/amm.525.416.

Full text

Abstract:

This paper reports the experimental results to evaluate in-plane shear performance of insulated concrete sandwich panel (ICSP) with glass fiber-reinforced polymer (GFRP) grid shear connectors. The variables considered in this study are the grid size (35 and 53mm) of GFRP shear connectors and the types of insulation (expanded polystyrene, EPS and extruded polystyrene with special slots, XPSS). For loading in-plane shear force to interface between inner and outer wall of ICSP system, the ICSP specimens were supported vertically at the bottom edge of the two concrete outer walls by steel blocks.

APA, Harvard, Vancouver, ISO, and other styles

48

MERTELJ, T., A. A. BOSAK, O. YU GORBENKO, A. R. KAUL, and D. MIHAILOVIC. "ULTRAFAST OPTICAL RESPONSE IN GIANT MAGNETORESISTANCE MANGANITES." International Journal of Modern Physics B 14, no. 29n31 (2000): 3584–89. http://dx.doi.org/10.1142/s021797920000409x.

Full text

Abstract:

We measured optical time-resolved photoinduced reflectivity in La 0.82 Pb 0.18 MnO 3+δ thin film as a function of temperature. The photoinduced signal consists of initial fast relaxation on 200-300 fs scale followed by a slower relaxation on 10-100 ps timescale and extremely slow response on the ns-μs timescale. All components show distinctive changes below metal-insulator transition. Amplitudes of the faster components increase with decreasing temperature below metal-insulator transition indicating a bottleneck in the relaxation. The slow components amplitudes show distinctive peak at ~200 K

APA, Harvard, Vancouver, ISO, and other styles

49

Zhu, Shiyang, G. Q. Lo, and D. L. Kwong. "Theoretical investigation of silicide Schottky barrier detector integrated in horizontal metal-insulator-silicon-insulator-metal nanoplasmonic slot waveguide." Optics Express 19, no. 17 (2011): 15843. http://dx.doi.org/10.1364/oe.19.015843.

Full text

APA, Harvard, Vancouver, ISO, and other styles

50

Ma, Zhizhen, Kazuya Kikunaga, Hao Wang, et al. "Compact Graphene Plasmonic Slot Photodetector on Silicon-on-Insulator with High Responsivity." ACS Photonics 7, no. 4 (2020): 932–40. http://dx.doi.org/10.1021/acsphotonics.9b01452.

Full text

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!