Relevant bibliographies by topics / Slti

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Slti'

Author: Grafiati
Published: 10 March 2023

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Slti.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Slti"

1

Rodríguez Sousa, Antonio Alberto, José Muñoz-Rojas, Teresa Pinto-Correia, Pedro A. Aguilera, Jesús M. Barandica, and Alejandro J. Rescia. "A Comparative Analysis of Soil Loss Tolerance and Productivity of the Olive Groves in the Protected Designation of Origin (PDO) Areas Norte Alentejano (Portugal) and Estepa (Andalusia, Spain)." Agronomy 11, no. 4 (March 31, 2021): 665. http://dx.doi.org/10.3390/agronomy11040665.

Full text
Abstract:
Olive groves are Mediterranean systems that occupy more than 2.5 M ha in Spain and 0.352 M ha in Portugal. Assuming the differences between both countries in terms of olive grove regulation and considering their multifunctionality, it is useful to implement agronomic indices to estimate their sustainability. The Soil Loss Tolerance Index (SLTI) and the Soil Productivity Index (SPI) are two such indices. We calculated both indices in the Protected Designation of Origin (PDO) Norte Alentejano (Portugal). The SLTI index was adapted considering specific variables of the analysed olive groves (i.e., SLTIog). The values obtained were compared with those previously estimated for PDO Estepa (Spain). The negative impacts of erosion and the underlying agricultural practices on the sustainability of olive groves became evident, resulting in decreased soil productivity at the regional level. The SLTIog index showed higher values for crops, being a more realistic tool to analyse sustainability. A higher soil loss tolerance was detected for integrated groves in the PDO Norte Alentejano than for PDO Estepa due to the shorter age of olive cultivation in Portugal, with incipient soil impacts. These indices provide information on the degree of soil erosion, allowing farmers and decision-makers to apply practices to maximise the sustainability of olive groves.
APA, Harvard, Vancouver, ISO, and other styles
2

Rodríguez Sousa, Barandica, and Rescia. "Estimation of Soil Loss Tolerance in Olive Groves as an Indicator of Sustainability: The Case of the Estepa Region (Andalusia, Spain)." Agronomy 9, no. 12 (November 21, 2019): 785. http://dx.doi.org/10.3390/agronomy9120785.

Full text
Abstract:
Spain is the world's leading producer of olive oil, with the largest number of olive agro-systems in the Andalusia region. However, rural migration, low profitability, and biophysical limitations to production have compromised their sustainability. Soil erosion is the main cause of declining production and must be controlled to sustain production and keep soil loss below a threshold (soil loss tolerance, SLT). In this paper, the Soil Loss Tolerance Index (SLTI) for non-specific crops was calculated, theoretically, in different Andalusian olive-growing areas. A new Soil Loss Tolerance Index specifically for olive groves was developed (SLTIog) using soil variables related to erosion corresponding to the Estepa region. This index and the Soil Productive Index (SPI) were estimated. Andalusian olive groves with severe erosion were unsustainable for a 150-year period according to SLTI. However, applying the SLTIog in olive groves of Estepa, soil loss was not unsustainable. Although no statistically significant differences were detected between the two SLT indices, the consideration of specific soil variables in the SLTIog made it more accurate and reliable for the assessment of potential long-term sustainability. The use of specific indices for olive groves can inform the adoption of management measures to maintain productivity and support conservation.
APA, Harvard, Vancouver, ISO, and other styles
3

Moussé, Wassiyath, Haziz Sina, Farid Baba-Moussa, Pacôme A. Noumavo, Nadège A. Agbodjato, Adolphe Adjanohoun, and Lamine Baba-Moussa. "Identification of Extended-Spectrumβ-LactamasesEscherichia coliStrains Isolated from Market Garden Products and Irrigation Water in Benin." BioMed Research International 2015 (2015): 1–11. http://dx.doi.org/10.1155/2015/286473.

Full text
Abstract:
The present study aimed at biochemical and molecular characterization ofEscherichia colistrains isolated from horticultural products and irrigation water of Cotonou. The samples were collected from 12 market gardeners of 4 different sites. Rapid’E. colimedium was used for identification ofE. colistrains and the antimicrobial susceptibility was performed by the agar disk diffusion method. Theβ-lactamases production was sought by the liquid acidimetric method. The genes coding forβ-lactamases and toxins were identified by PCR method. The results revealed that about 34.95% of the analyzed samples were contaminated byE. coli. Cabbages were the most contaminated byE. coli(28.26%) in dry season. All isolated strains were resistant to amoxicillin. The penicillinase producingE. colicarriedblaTEM(67.50%),blaSHV(10%), andblaCTX-M(22.50%) genes. The study revealed that the resistance genes such as SLTI (35.71%), SLTII (35.71%), ETEC (7.15%), and VTEC (21.43%) were carried. Openly to the found results and considering the importance of horticultural products in Beninese food habits, it is important to put several strategies aiming at a sanitary security by surveillance and sensitization of all the actors on the risks of some practices.
APA, Harvard, Vancouver, ISO, and other styles
4

Arruda, Constança Maria Maia, Ricardo Bernardes De Mello, Sidney Verginio Da Silva, and Fabrício Pelloso Piurcosky. "PANORAMA DA GOVERNANÇA DE TECNOLOGIA DA INFORMAÇÃO NO COMANDO DA AERONÁUTICA." Interação - Revista de Ensino, Pesquisa e Extensão 16, no. 16 (February 15, 2019): 79–106. http://dx.doi.org/10.33836/interacao.v16i16.67.

Full text
Abstract:
Este trabalho apresenta um panorama da implantação da governança de TI no COMAER, abordando os levantamentos de governança de TI realizados pelo Tribunal de Contas da União (TCU), em 2007, 2010, 2012 e 2014, nos quais o Comando da Aeronáutica (COMAER) vem obtendo resultados favoráveis em comparação com outros órgãos. Contudo, há o propósito da instituição em obter melhores resultados em levantamentos futuros, e, para tal, visualiza-se a necessidade de empreender um processo de mudança institucional. São analisados textos da literatura acadêmica, Acórdãos do TCU, Instruções Normativas da SLTI/MPOG e os modelos de referência.
APA, Harvard, Vancouver, ISO, and other styles
5

JINNEMAN, KAREN C., PAULA A. TROST, WALTER E. HILL, STEPHEN D. WEAGANT, JAMES L. BRYANT, CHARLES A. KAYSNER, and MARLEEN M. WEKELL. "Comparison of Template Preparation Methods from Foods for Amplification of Escherichia coli O157 Shiga-Like Toxins Type I and II DNA by Multiplex Polymerase Chain Reaction." Journal of Food Protection 58, no. 7 (July 1, 1995): 722–26. http://dx.doi.org/10.4315/0362-028x-58.7.722.

Full text
Abstract:
Escherichia coli O157:H7 has been responsible for several recent food-borne outbreaks in the United States. To protect the public health, it is essential that rapid and sensitive methods be developed for detection of this pathogen in foods. Methods were compared for preparation of template DNA for the polymerase chain reaction (PCR) from enrichments of food homogenates seeded with E. coli O157:H7. Samples were enriched for 6 h at 37°C in modified tryptic soy broth supplemented with vancomycin, cefsulodin, and cefixime. Aliquots of the enrichments (10 ml or 1 ml) were analyzed by either washing twice with physiological saline or incubating with antibodies to O157 coupled to immunomagnetic beads (Dynal®) followed by resuspending and boiling the samples. A portion of the preparation was used in a multiplex PCR to amplify a 274-bp fragment from the sltI gene and a 364-bp fragment from the sltII gene. PCR amplification of 1-ml portions of enrichment broth was successful at inoculation levels of about 10 cells per g of food. Increasing the test sample volume to 10 ml and/or using an immunomagnetic separation step improved the PCR detection sensitivity to about 1 cell per g; the entire analysis can be completed within 12 h.
APA, Harvard, Vancouver, ISO, and other styles
6

Santos, Diana Leite Nunes dos, and João Souza Neto. "Avaliação da percepção da conformidade de processos de contratação de soluções de Tecnologia da Informação com a Instrução Normativa no 4/2010 da SLTI." Revista do Serviço Público 64, no. 1 (January 29, 2014): 77–107. http://dx.doi.org/10.21874/rsp.v64i1.116.

Full text
Abstract:
Este estudo propõe um mecanismo de avaliação da conformidade de um processo de contratação pública de Tecnologia da Informação (TI) com as atividades descritas no guia prático para contratação de soluções de TI baseado na IN – SLTI no 4/2010, em conjunto com uma avaliação da maturidade das fases dessa norma, por meio de um estudo de caso. Os resultados obtidos mostraram que, para o Ministério Público Brasileiro, a conformidade com o normativo alcançou um nível preocupante de aderência, com uma média de 48%. As falhas de conformi- dade, neste caso, indicam possíveis deficiências na governança e planejamento de TI. A maturidade do processo foi enquadrada no nível 2, que tem foco na repetição de procedimentos, porém de forma intuitiva. Concluiu-se que, para garantir uma maior aderência ao processo, é importante estabelecer controles formais e frequentes, ações de transparência e transferência de conhecimento.Palavras-Chave: IN 4/2010; Contratações Públicas de TI; Aquisições de TI
APA, Harvard, Vancouver, ISO, and other styles
7

Mellado, Laura, Herbert N. Arst, and Eduardo A. Espeso. "Proteolytic activation of both components of the cation stress–responsive Slt pathway in Aspergillus nidulans." Molecular Biology of the Cell 27, no. 16 (August 15, 2016): 2598–612. http://dx.doi.org/10.1091/mbc.e16-01-0049.

Full text
Abstract:
Tolerance of Aspergillus nidulans to alkalinity and elevated cation concentrations requires both SltA and SltB. Transcription factor SltA and the putative pseudokinase/protease signaling protein SltB comprise a regulatory pathway specific to filamentous fungi. In vivo, SltB is proteolytically cleaved into its two principal domains. Mutational analysis defines a chymotrypsin-like serine protease domain that mediates SltB autoproteolysis and proteolytic cleavage of SltA. The pseudokinase domain might modulate the protease activity of SltB. Three forms of the SltA transcription factor coexist in cells: a full-length, 78-kDa version and a processed, 32-kDa form, which is found in phosphorylated and unphosphorylated states. The SltA32kDa version mediates transcriptional regulation of sltB and, putatively, genes required for tolerance to cation stress and alkalinity. The full-length form, SltA78kDa, apparently has no transcriptional function. In the absence of SltB, only the primary product of SltA is detectable, and its level equals that of SltA78kDa. Mutations in sltB selected as suppressors of null vps alleles and resulting in cation/alkalinity sensitivity either reduced or eliminated SltA proteolysis. There is no evidence for cation or alkalinity regulation of SltB cleavage, but activation of sltB expression requires SltA. This work identifies the molecular mechanisms governing the Slt pathway.
APA, Harvard, Vancouver, ISO, and other styles
8

STEWART, JAMES, and SAMPSA HYYSALO. "INTERMEDIARIES, USERS AND SOCIAL LEARNING IN TECHNOLOGICAL INNOVATION." International Journal of Innovation Management 12, no. 03 (September 2008): 295–325. http://dx.doi.org/10.1142/s1363919608002035.

Full text
Abstract:
This paper explores the role of intermediaries in the development and appropriation of new technologies. We focus on intermediaries that facilitate user innovation, and the linking of user innovation into supply side activities. We review findings on intermediaries in some of our studies and other available literature to build a framework to explore of how intermediaries work in making innovation happen. We make sense of these processes by taking a long-term view of the dynamics of technology and market development using the social learning in technological innovation (SLTI) framework. Our primary concern is with innovation intermediaries and their core roles of configuring, facilitating and brokering technologies, uses and relationships in uncertain and emerging markets. We show the range of positions and influence they have along the supply-use axis in a number of different innovation contexts, and how they are able to bridge the user-developer innovation domains. Equipped with these insights, we explore in more depth how intermediaries affect the shape of new information and communication technologies and the importance of identifying and nurturing the user-side intermediaries that are crucial to innovation success.
APA, Harvard, Vancouver, ISO, and other styles
9

Luiz, Lilian Campagnin, Elisete Dahmer Pfitscher, and Fabrícia Silva da Rosa. "PLANO DE GESTÃO DE LOGÍSTICA SUSTENTÁVEL: PROPOSIÇÃO DE AÇÕES E INDICADORES SOCIOAMBIENTAIS PARA AVALIAR O DESEMPENHO NOS ÓRGÃOS PÚBLICOS FEDERAIS." Revista de Administração da UFSM 8 (October 27, 2015): 8. http://dx.doi.org/10.5902/1983465917696.

Full text
Abstract:
A gestão socioambiental nos órgãos públicos federais brasileiros tornou-se obrigatória com o Decreto n.º 7.746/2012, que instituiu a elaboração e implementação do Plano de Gestão de Logística Sustentável (PLS). O PLS foi regulamentado pela Instrução Normativa SLTI/MP n.º 10/2012, que determina, além de outros fatores: o conteúdo mínimo a estar contido no PLS, incluindo o Plano de Ações com práticas de sustentabilidade e racionalização no uso de materiais e serviços; os temas mínimos a serem abrangidos; e a forma de avaliação, que deve ocorrer por meio de indicadores. Assim, por se tratar de uma demanda emergente no setor público federal, o presente artigo tem como objetivo geral propor um rol de ações e indicadores para avaliar o desempenho socioambiental nos órgãos públicos federais. Este estudo, de natureza teórica e objetivo-exploratória, é realizado com base em pesquisa bibliográfica para trazer as seguintes contribuições: sugestão de um rol de ações socioambientais passíveis de aplicação nos órgãos públicos federais, com atendimento mínimo aos temas solicitados; elaboração de indicadores para avaliar o desempenho socioambiental nos órgãos públicos federais, nos moldes da instrução normativa regulamentadora; e proposição de uma metodologia para analisar os resultados alcançados.
APA, Harvard, Vancouver, ISO, and other styles
10

Franco, Caroline Da Rocha. "Licitações ecoeficientes e as políticas públicas ambientais." A&C - Revista de Direito Administrativo & Constitucional 13, no. 51 (January 15, 2013): 275. http://dx.doi.org/10.21056/aec.v13i51.152.

Full text
Abstract:
As contratações com o poder público movimentam de 10% a 30% do PIB de países desenvolvidos ou em desenvolvimento e podem ser uma forma de incentivo ao mercado de consumo ambientalmente sustentável. Analisa-se o princípio da eficiência conjugado ao princípio da defesa do meio ambiente, inferindo-se que o conceito de ecoeficiência colore o disposto pelo caput do art.37 da Constituição Federal. Por meio da positivação da ecoeficiência pela Lei nº 12.305/2010 se pode afirmar o reconhecimento do legislador de que o poder de compra deve estar atrelado às questões ambientais. Com a alteração do art. 3º da Lei nº 8.666/93 pela Lei nº 12.349/2010, inserindo-se como dever da licitação a garantia do desenvolvimento nacional sustentável, surge o dever de se privilegiar nas contratações públicas produtos e serviços que levem em conta as conseqüências ambientais e sociais de sua produção. Parte-se para a busca de um Estado que legisla sobre política ambiental e também se preocupa com o planejamento das aquisições feitas pela Administração Pública. Constata-se que a modificação da Lei 8.666/93 está atrelada ao conceito de ecoeficiência. Todavia, para efetivação de seus objetivos, as contratações sustentáveis dependem de outras normas disciplinadoras, a exemplo da Instrução Normativa nº 01/2010 da SLTI/MPOG e do Decreto Federal nº 7.746/2012.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Slti"

1

Oliveira, Guilherme Antonio de Sousa. "Gest??o de riscos no processo de contrata????o da instru????o normativa 04 da SLTI/MPOG." Universidade Cat??lica de Bras??lia, 2016. https://bdtd.ucb.br:8443/jspui/handle/tede/2002.

Full text
Abstract:
Submitted by Kelson Anthony de Menezes (kelson@ucb.br) on 2016-12-20T13:07:45Z No. of bitstreams: 1 AntoniodeSousaOliveiraDissertacao2016.pdf: 1967934 bytes, checksum: 50d1d1c01ffcff18ae280ca4ff76673d (MD5)
Made available in DSpace on 2016-12-20T13:07:45Z (GMT). No. of bitstreams: 1 AntoniodeSousaOliveiraDissertacao2016.pdf: 1967934 bytes, checksum: 50d1d1c01ffcff18ae280ca4ff76673d (MD5) Previous issue date: 2016-02-23
Since 2008, the Normative SLTI n?? 04 (IN4) has been established as the legal instrument for planning and supporting the procurement process of Information Technology (IT) solutions. Risk Management, which is a mandatory phase in IN4, seeks to ensure that the inherent risks in this process are mitigated. However, recent surveys from supervisory and control agencies have indicated a low maturity in this practice. This work collected the perception of managers involved in IT procurement regarding the compliance to the procurement risk management process according to the Supplementary Normative DSIC n?? 04 (NC4). For this purpose, an online survey was conducted through a questionnaire containing 33 questions, which were answered by 35 managers of 15 organizations. Completed this phase, the analysis of the results was made and 93% of respondents reported adhering to IN4, however, the survey findings contradicts this high rate, considering the results of specific assessments for each phase of risk management that did not exceeded 59% of compliance in IN4, and the phase where the estimation of the probability of risks should occur had the lowest compliance rate, only 22%. However, the main finding of this research took place in the stage that evaluated the adoption of NC4 guidelines, where only 15% of managers reported adopting it fully. These findings points out to the possible ignorance of the risks that the IT procurement process is exposed as well as the possible occurrence of frauds and the waste of public resources which, ultimately, may represent inefficiency in achieving expected results as well as possible losses to society.
Desde 2008, a Instru????o Normativa n?? 04/SLTI (IN4) vem se consolidando como um instrumento legal de planejamento e apoio ao processo de contrata????o de Solu????es de Tecnologia da Informa????o (TI). A Gest??o de Riscos, etapa obrigat??ria da IN4, busca assegurar que os riscos inerentes a este processo sejam mitigados. Entretanto, recentes levantamentos de ??rg??os de fiscaliza????o e controle apontam baixa maturidade nesta pr??tica. Este trabalho fez uma an??lise da percep????o de gestores envolvidos em contrata????es de TI quanto ?? conformidade ao processo de Gest??o de Riscos da IN4 e quanto ao conhecimento e ado????o da Norma Complementar n?? 04/DSIC (NC4). Para tanto, foi realizado um levantamento on-line em que 35 gestores de 15 ??rg??os responderam a 33 quest??es. Conclu??da esta etapa e feita a an??lise dos resultados, 93% dos respondentes informaram conformidade ?? IN4, entretanto, os achados do levantamento se opuseram a este elevado ??ndice, tendo em vista que os resultados das avalia????es espec??ficas para cada etapa da gest??o de riscos na IN4 n??o superaram os 59% de conformidade, sendo a estimativa da probabilidade de ocorr??ncia dos riscos a etapa que apresentou o menor ??ndice de conformidade, 22% apenas. Contudo, o principal achado desta pesquisa se deu na etapa que avaliou a ado????o das diretrizes da NC4, onde apenas 15% dos gestores informaram adot??-las integralmente. Estas descobertas podem sinalizar o poss??vel desconhecimento dos riscos que um processo de contrata????o de TI est?? exposto e a poss??vel ocorr??ncia de ilegalidade e desperd??cio de recursos p??blicos que, em ??ltima an??lise, podem representar inefici??ncia no alcance dos resultados e preju??zos para a sociedade.
APA, Harvard, Vancouver, ISO, and other styles
2

Silva, Hildiene Castro. "Gestão de riscos em aquisições de TI : proposta de avaliação de maturidade do processo de contratação de TI da IN04/SLTI no âmbito do INSS." reponame:Repositório Institucional da UnB, 2014. http://repositorio.unb.br/handle/10482/17427.

Full text
Abstract:
Dissertação (mestrado)—Universidade de Brasília, Instituto de Ciências Exatas, Departamento de Ciência da Computação, 2014.
Submitted by Ana Cristina Barbosa da Silva (annabds@hotmail.com) on 2014-12-15T17:26:52Z No. of bitstreams: 1 2014_HildieneCastroSilva.pdf: 2728978 bytes, checksum: 39d0f39e6f4cefdaad110a0f902637a2 (MD5)
Approved for entry into archive by Patrícia Nunes da Silva(patricia@bce.unb.br) on 2014-12-19T13:34:12Z (GMT) No. of bitstreams: 1 2014_HildieneCastroSilva.pdf: 2728978 bytes, checksum: 39d0f39e6f4cefdaad110a0f902637a2 (MD5)
Made available in DSpace on 2014-12-19T13:34:12Z (GMT). No. of bitstreams: 1 2014_HildieneCastroSilva.pdf: 2728978 bytes, checksum: 39d0f39e6f4cefdaad110a0f902637a2 (MD5)
As organizações públicas buscam cada vez mais que os seus Processos de Contratação de Tecnologia da Informação sejam bem elaborados e aperfeiçoados para que se adequarem às leis, normas e regulamentações, em sua maioria, reunidas na IN04/SLTI. Este trabalho apresenta uma proposta de avaliação de maturidade para o Processo de Contratação de TI da Secretaria de Logística de Tecnologia da Informação (SLTI), tendo como estudo de caso o Instituto Nacional do Seguro Social (INSS). A avaliação da maturidade dos processos com foco na gestão de riscos fornece informações podem apoiar a organização a planejar, executar e monitorar suas atividades visando à obtenção dos seus objetivos e melhoria contínua. Para se chegar à proposta de avaliação de maturidade recorreu-se ao conceito da Janela de Johari, melhores práticas de modelos já consolidados como Risk Maturity Model (RMM), Capability Maturity Model Integration for Acquisition (CMMI-ACQ) e Control Objectives for Information and Related Technology (COBIT). ______________________________________________________________________________ ABSTRACT
Public organizations increasingly seek that tlıeir Information Technologv Aoquisition Processes are well developed and enhanced iıı such a wav tlıat are adherent to laws. rules and regulations. mostlv gathered in the IN 04 / SLTI. This work proposes a matu rity assessment for tlıe Acquisition Processes of the Logistics and Information Technology Information Technology Secretary (SLTI), taking the National Social Security Institute (INSS) as a case study. Assessing the maturity of processes with a focııs on risk man agernent provides information to support the organization to plan, execute and monitor their activities aimed at achieving its goals and continous improvement.. To reach the proposed maturity assessment we ıısed tlıe concept of the Johari Window, best practices models already established as Risk Maturity Model (RMM). Capability Maturity Model Integration for Acquisition (CMMI-ACQ) and Control Objectives for Information and Related Technology (COBIT).
APA, Harvard, Vancouver, ISO, and other styles
3

Cukrowicz, Kelly C., Sarah L. Brown, Sean M. Mitchell, Jared F. Roush, and Jameson K. Hirsch. "Feasibility of Assessing Suicide Ideation and History of Suicidal Behavior in Rural Communities." Digital Commons @ East Tennessee State University, 2017. https://doi.org/10.1111/sltb.12378.

Full text
Abstract:
Suicide in rural areas has not received significant attention in the research literature to this point, although suicide rates are higher among adults and older adults in rural areas than in urban areas. The aims of the study were as follows: (1) establish the feasibility of assessing suicide ideation and history of suicidal behavior; (2) determine preliminary estimates of the prevalence of suicide ideation, and history of suicide attempts; and (3) examine the effectiveness and acceptability of safety and referral plans for individuals whose responses indicated elevated suicide risk, in rural communities with limited access to referral care. Participants were 96 adults aged 40 to 85 years old (M = 57.34, SD = 11.47) residing in West Texas. Our results indicate that 26% of participants endorsed a lifetime history of suicide ideation and/or suicide attempt(s) and 12.5% reported suicide ideation in the past year. In addition, 93.4% of participants reported that participation in our suicide-focused study was an excellent or good experience. Results suggest that individuals in rural communities are willing to talk about suicide, found the experience helpful, and were satisfied with the referral process.
APA, Harvard, Vancouver, ISO, and other styles
4

Møller, Christian Nicolai. "Scanning slit 3D displays." Thesis, University of Cambridge, 2006. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.613824.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Sander, R. "Modelling of slit die extrusion." Thesis, Swansea University, 1993. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.638761.

Full text
Abstract:
The present work is concerned with the investigation of the slit die extrusion of molten polymers, and a systematic strategy is developed for the modelling of its major aspects. The objective is to provide a fundamental understanding of the flow phenomena within such a die, coupled with thermal and mechanical interaction of melt and die body, and to provide user friendly software for analysis and design. Isothermal, non-Newtonian flow in the large aspect ratio channels of such dies is modelled using a Hele-Shaw formulation. The pressure field in the die causes a change of the flow channel dimensions, and hence alters the melt distribution. An experimental technique is applied to determine this die body deflection in a 1.3m commercial die; it is found to be substantial. Modelling of the die deformation using a commercial 3-D finite element package is described, with the load being based on a pressure field previously determined in the undeflected flow channel geometry. Prompted by unsatisfactory results, an algorithm is developed to evaluate the die body deflection iteratively, by coupling a 2-D thick plate analysis with the Hele-Shaw flow analysis, resulting in significantly improved results. Modelling of the conjugate melt flow/die heat transfer problem on the die cross-section is also carried out. Viscous heat generation, conduction and convection energy transport in the melt coupled with heat conduction in the die body are considered, together with the influence of electrical die heating and heat losses from the die surfaces by convection and radiation. Conclusions are drawn on thermal aspects of die design and operation. A graphical user interface embedded in Microsoft Windows is developed for a number of finite element codes, facilitating their use by non-specialists, and providing graphical displays of results. An outline of the operation of the complete package is described, including a convenient contouring algorithm.
APA, Harvard, Vancouver, ISO, and other styles
6

Grandin, Sara, and Anna Pettersson. "Fastighetsmäklare - mycket slit och dåliga villkor?" Thesis, University of Gävle, Department of Business Administration and Economics, 2008. http://urn.kb.se/resolve?urn=urn:nbn:se:hig:diva-584.

Full text
Abstract:

Fastighetsmäklare har ett rykte att de tjänar mycket pengar utan att anstränga sig. Stämmer detta eller är det bara en bild som media skapat? Med den bakgrunden valde vi att titta närmare på vilka lönesystem för fastighetsmäklare som finns i branschen. Med avgränsning till privatbostadsmarknaden och Stockholm-Uppsala regionen.

Syftet är att öka kunskapen om olika lönesystem för fastighetsmäklare på privatbostadsmarknaden.

Vi har även tittat på hur det fungerar med sjukpenning, föräldrapenning och a-kassa. Sedan har vi valt att titta på hur en mer traditionell lön ser ut och vilka förmåner utöver lön som kan förekomma.

Vi har genomfört två intervjuer angående hur en traditionell eller ”normal” lön fungerar samt fyra intervjuer med fastighetsmäklare angående lönesystem för fastighetsmäklare.


Real estate agents have a reputation of making a lot of money without any effort. Is this true or is it just a picture painted by the media? With this in mind we have decided to take a closer look at different systems for how real estate agents get their salary. We have decided to narrow our thesis down to real estate agents who are operating in the Uppsala-Stockholm region with residential sales.

The purpose of this thesis is to increase the knowledge about different systems for salaries for real estate agents who are working with residential sales.

What happens if you get sick, if you become a parent or if you loose your employment are questions that we discuss.

We have interviewed real estate agents and asked them about their terms for salary. We have also looked at how a more traditional salary works.

APA, Harvard, Vancouver, ISO, and other styles
7

Battye, Robin Antony. "Repulsive signaling from the Drosophila midline requires slit function : repellent signaling through robo1 requires the slit LRR /." *McMaster only, 2000.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Shaw, Graham David. "New techniques in astronomical multi-slit spectroscopy." Thesis, Durham University, 1993. http://etheses.dur.ac.uk/5643/.

Full text
Abstract:
LDSS-2 is a low dispersion survey spectrograph for the William Herschel Telescope. It was constructed to meet an increasing demand for large scale statistical surveys of stellar and galactic populations. This thesis describes its design, construction and installation, together with additional research concerning the fabrication of multi-slit aperture masks.LDSS-2 has a similar optical system to its predecessor LDSS-1, but it can hold greater numbers of aperture masks, filters and grisms, and its control system is fully automated. This is expected to improve its observing efficiency and allow LDSS-2 to be run as a common-user instrument. A range of instrument characterisation tests were performed, and they confirmed that LDSS-2 is capable of meeting its astronomical objectives. Its peak efficiency with the medium-blue grism was found to be 20.4% at 5915A with half-power points at 4135A and 7225A.Six different types of aperture mask were investigated, of which two (photochemically etched and mechanically milled) were tested using LDSS- 2. Work was begun towards the development of laser-cut masks, including the procurement of a 16W carbon dioxide laser and a motorised X-Y table. At present, mechanically milled masks offer the best compromise between cost, lead time, flexibility and quality for an instrument such as LDSS-2. Movable-slit masks may be preferred if access to the focal plane is restricted, but at present they are limited to lower multiplex gains. Laser-cut masks appear to offer the most potential for development in the immediate future, but liquid crystal masks may also become competitive in the longer term.
APA, Harvard, Vancouver, ISO, and other styles
9

Knott, Geoffrey. "New forms of bistable composite slit tube." Thesis, University of Surrey, 2018. http://epubs.surrey.ac.uk/848818/.

Full text
Abstract:
In recent years extremely small satellites have been developed in response to trends in the space industry to achieve more for less cost. Extremely lightweight and efficiently packaged deployable structures are essential for achieving large-scale applications including communication antennas, solar arrays, and in recent years, deorbiting drag-sails. This thesis is motivated for developing novel deployable helical antennas for space-based maritime surveillance. The helical antenna technology provides packaging efficiency and radio frequency characteristics superior to the latest efforts of international research groups. To achieve this, the research presented focuses on developing the proven bistable composite slit tube (BCST) deployable technology. These are open-section tubular structures which can be deployed and rolled up into a compact coil, analogous to a tape measure, but do not require constraint to remain stowed. This behaviour is referred to as bistability and enables lightweight and relatively simple deployable structures for spacecraft applications. New forms of BCST are modelled through the introduction of additional curvatures, manufactured and described in this work with two new subcategorisations established: toroidal and helical. Toroidal BCSTs are doubly curved with both principal curvatures initially non-zero in the deployed stress-free state. Helical BCSTs are doubly curved and twisted out-of-plane. Investigations into the effects of geometrical parameters and laminated composite material properties on the bistable coils of both types are presented. The results provide an understanding of bistable behaviour in new forms of BCST previously neglected in the literature, which is almost exclusively focused on straight forms. As a consequence of this research, new deployable structure technologies are envisaged in the areas of compact terrestrial shelters and small satellite communications.
APA, Harvard, Vancouver, ISO, and other styles
10

He, Yiting. "2D/3D Alumina Nanoplatelet Slit-Pore Membranes." Thesis, Université d'Ottawa / University of Ottawa, 2019. http://hdl.handle.net/10393/39966.

Full text
Abstract:
Abstract: Oil pollution and spills cause serious damage to marine ecosystems and coastal environments. Currently, oily waters recuperated form a spill must be shipped onshore for treatment. This limits the volume of water that can be treated during a spill. There is a need to develop technologies to treat oily waters below 15 ppm (parts per million) at the site of the spill. Synthetic membrane technologies are widely used in water treatment and purification. They can offer an on-site solution to contaminated oily water treatment in oil production and spills. The suitability of a membrane for use in this application is determined by the type of material used in its fabrication. Compared to polymeric membranes, inorganic membranes are inert to microbiological degradation, offer high chemical and thermal resistance, and can easily be backflushed and cleaned once fouled. However, inorganic membranes consisting of metal oxides are heavier and more expensive than polymeric membranes, due to their bulky and brittle ceramic support layers. This limits their application when the overall weight of a process unit is of concern. A newly developed 2D/3D material, named twinned alumina nanosheets (TAN), has recently been used to make dynamic membranes. The nanoplatelets forming TAN have a length of 4 µm, a width of 1 µm, and a thickness of 100 nm. They have a very high permeability, a 0.2 µm-pore size and a porosity up to 88% due to their low nanosheet volume. These unique characteristics make TAN a very promising material to form membrane selective layers. However, they must be supported on a very open layer in order to take advantage of their high porosity. In this work, a composite membrane was produced with a selective layer of 2D/3D alumina nanoplatelets deposited onto stainless steel meshes and ceramic supports. The structure of the TAN in the selective layer was reinforced with binders. The main objective of this work was to verify the adhesion of the TANs onto the support. The crystallization of TAN was optimized to obtain an open 2D/3D structure. This structure was then deposited on a stainless-steel mesh. The mesh was pretreated by electrochemical etching to achieve a re-entrant surface. The mesh was immersed in an etching solution and placed parallel to a conductive graphite plate under a constant electric potential of 5V for 4 min. Aqueous solutions of silica sol and colloidal silver were tested as binding agents. They were deposited on the mesh with TAN and sintered for 4 hrs. Experiments were performed on testing stainless steel meshes with different opening sizes and comparing different calcination temperatures. The best sintering temperature was 800°C for a mesh with an opening size of 35µm. The synthesized membrane was challenged with a suspension of 10 ppm bentonite clay at a constant pressure of 100 mbar. The integral structure of a TAN membrane produced with a 2.5wt% silica binder was maintained after backflushing. The 2.5wt% silica membrane had a high flux and the particle filtration process for this membrane was modelled as pore constriction and intermediate blocking, indicating that backflushing provided the deep cleaning of pores. According to the SEM images, the 2.5wt% silica membrane preserved the integral structure of the TAN, while the pores tended to fill with silica at higher silica concentrations. The effective pore size of the 2.5wt% silica membrane was estimated to be the smallest, which is approximately 0.53 μm. The 7.5wt% silica membrane had half the permeate flux of the other membranes, because of the high concentration of binder filling the pores of the TAN selective layer. The SiO 2 binder had a positive effect in reinforcing the TAN particles. The flux of the membrane did not increase after backflushing indicating that the selective layer of the membrane was securely bound to the stainless steel mesh. The membrane exhibited flux decline between backflushings indicating that particles were retained on its surface. SEM images taken after the filtration showed that this membrane completely released bentonite particles form its pores. Tests were also performed with a membrane having two TAN coatings on the wire mesh. This reduced the flux but did not improve the retention of fine particles. Colloidal silver was found to be a poor binding agent as particles were released particles from its selective layer. Silica was a highly successful binding agent while colloidal silver was not. TAN was also successfully deposited onto ceramic supports. It was also retained on top of the membrane after backflushing. The results of this work demonstrate that TANs reinforced and bound with silica are a promising type of material to form membrane selective layers. These layers have an open pore structure with a three-dimensional channel connectivity on both stainless steel and ceramic supports. The selective layer was successfully bound to the stainless steel supports. If the pore size of this membrane were to be reduced, it would meet the requirements for use at the site of an oil spill to treat contaminated waters as it does not need the heavier supports found in traditional ceramic membranes. Résumé: La pollution et les déversements d'hydrocarbures causent de graves dommages aux écosystèmes marins et aux environnements côtiers. À l'heure actuelle, les eaux huileuses récupérées d'un déversement doivent être expédiées à terre pour leur décontamination. Ceci limite le volume d’eau contaminé qui peut être traité. Il est nécessaire de développer des technologies permettant de traiter les eaux huileuses en dessous de 15 ppm (parties par million) sur le site du déversement. Les technologies membranaires sont largement utilisées dans le traitement et la purification de l'eau. La possibilité de se servir d’une membrane dans cette application est déterminée par les matériaux utilisés dans sa fabrication. Comparées aux membranes polymères, les membranes inorganiques sont inertes vis-à-vis de la dégradation microbiologique, offrent une résistance chimique et thermique élevée et peuvent facilement être rincées et nettoyées une fois encrassées. Cependant, les membranes inorganiques constituées d'oxydes métalliques sont plus lourdes et plus coûteuses que les membranes polymères, en raison de leurs couches de support en céramique volumineuses et cassantes. Cela limite leur application lorsque le poids total d'une unité de traitement est préoccupant. Un matériau 2D/3D récemment développé, appelé TAN (Twinned Alumina Nanosheets), a récemment été utilisé dans la formation de membranes dynamiques. Les nano-plaquettes formant les TAN ont une longueur de 4 µm, une largeur de 1 µm et une épaisseur de 100 nm. Ils ont une très haute perméabilité, une taille de pores de 0,2 µm et une porosité allant jusqu'à 88% en raison du faible volume des nanofeuilles. Ces caractéristiques uniques font du TAN un matériau très prometteur pour la formation de couches sélectives de membranes. Cependant, ils doivent être déposes sur une couche très ouverte afin de tirer parti de leur grande porosité. Au cours de ce travail, une membrane composite a été réalisée avec une couche sélective de nanoplaques d’alumine 2D / 3D (TAN) déposées sur deux types de supports; des mailles en acier inoxydable et des supports en céramique. La structure du TAN dans la couche sélective a été renforcée avec des liants. L'objectif principal de ce travail était de vérifier l'adhérence des TAN sur le support. La cristallisation des TAN a été optimisée pour obtenir une structure 2D/3D ouverte. Cette structure a ensuite été déposée sur un treillis en acier inoxydable. Les mailles ont été prétraitées pour obtenir une surface réentrante. Le maillage a été immergé dans une solution de gravure et placé parallèlement à une plaque de graphite conductrice sous un potentiel électrique constant de 5 V pendant 4 min. Des solutions aqueuses de sol de silice et d’argent colloïdal ont été testées en tant que liants. Ils ont été déposés sur la maille et frittés pendant 4 heures. Des expériences ont été effectuées sur des mailles en acier inoxydable avec différentes tailles d’ouverture et températures de calcination. La meilleure température de frittage était de 800 ° C pour un treillis ayant une taille d'ouverture de 35 µm. La membrane synthétisée a été mise à l’essai avec une suspension de 10 ppm d'argile bentonite à une pression constante de 100 mbar. La structure intégrale de la membrane couche de TAN produite avec un liant à 2,5wt% de silice a été maintenue après les tests de perméabilité. La structure 3D poreuse a tendance à se remplir de silice à des concentrations de silice supérieures à 2,5wt%. La taille effective des pores de la membrane produite avec 2,5wt% de liant de silice a été estimée à 0,53 µm. Le flux de la membrane n'a pas augmenté après le rinçage, indiquant que la couche sélective de la membrane était liée de manière sûre au maillage en acier inoxydable. La membrane présentait un déclin de flux entre les rinçages indiquant que des particules étaient retenues à sa surface. Les images au microscope à balayage prises après la filtration ont montré que cette membrane libère complètement les particules de bentonite de ses pores. Des essais ont également été réalisés avec une membrane comportant deux revêtements TAN sur le treillis métallique. Cela réduit le flux mais n'améliore pas la rétention des particules fines. L'argent colloïdal s'est avéré être un agent de liaison médiocre car des particules sont libérées de sa couche sélective. La silice était un liant très efficace, contrairement à l'argent colloïdal. Le TAN a également été déposé avec succès sur des supports en céramique. Il est également resté sur la membrane après le rinçage à contre-courant. Les résultats de ce travail démontrent que les TAN renforcés avec un liant de silice sont un type de matériau prometteur pour former des couches sélectives, avec des structures à pores ouverts possédant une connectivité de canal tridimensionnelle, sur des supports en acier inoxydable et en céramique. La couche sélective a été liée avec succès au support en acier inoxydable. Si la taille des pores de cette membrane devait être réduite, elle pourrait être utilisée sur le site d'un déversement d'hydrocarbures pour traiter les eaux contaminées car elle ne nécessite pas les supports plus lourds que l'on trouve dans les membranes de céramique traditionnelles.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Slti"

1

Keolahragaan, Indonesia Direktorat Pendidikan, ed. Profil bahan ajar pendidikan jasmani, SLTP/SLTA. [Jakarta]: Departemen Pendidikan Nasional, Direktorat Jenderal Pendidikan Luar Sekolah, Pemuda dan Olahraga, Direktorat Pendidikan Keolahragaan, 2000.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Sumardi and Pusat Pembinaan dan Pengembangan Bahasa., eds. Pedoman pengajaran apresiasi puisi untuk SD, SLTP, dan SLTA. Jakarta: Pusat Pembinaan dan Pengembangan Bahasa, Departemen Pendidikan dan Kebudayaan, 1985.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Hartono, Harry S. Penyelenggaraan pesantren kilat di SD/SLTP/SLTA: Laporan studi. Jakarta: Departemen Pendidikan dan Kebudayaan, Badan Penelitian dan Pengembangan Pendidikan dan Kebudayaan, 1998.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Perum. Unit III Jawa Barat Perhutani. Panggeuing: Harewos tutugan gunung : hasil pasanggiri nulis puisi Sunda kehutanan tingkat SLTP-SLTA sa-tatar Sunda. Bandung: Perum Perhutani Unit III Jawa Barat & Banten, 2005.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Sumatera Barat (Indonesia). Badan Penelitian dan Pengembangan., ed. Laporan penelitian pencegahan penyalahgunaan narkoba di kalangan siswa SLTP dan SLTA melalui bimbingan dan konseling di Sumatera Barat. Padang: Pemerintah Propinsi Sumatera Barat, Badan Penelitian dan Pengembangan (Balitbang) kerjasama dengan Lembaga Penelitian, Universitas Padang, 2002.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Gellrich, Marcus-Matthias. The Slit Lamp. Berlin, Heidelberg: Springer Berlin Heidelberg, 2014. http://dx.doi.org/10.1007/978-3-642-39793-6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Tauhid, L. M. Inventarisasi data guru di Propinsi NTB: Studi deskriptif terhadap data guru SD, SLTP, dan SLTA negeri di Propinsi NTB : laporan penelitian. [Mataram]: Departemen Pendidikan dan Kebudayaan, Universitas Mataram, Fakultas Keguruan dan Ilmu Pendidikan, 1998.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

1958-, Sanders Valerie N., ed. The slit lamp primer. Thorofare, NJ: SLACK, Inc., 1998.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Ledford, Janice K. The slit lamp primer. 2nd ed. Thorofare, NJ: SLACK Inc., 2006.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Baretić, Renato. Kome ćemo slati razglednice. Zagreb: AGM, 2005.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Slti"

1

Werbowetski-Ogilvie, Tamra E., Mohamad Seyed Sadr, and Rolando F. Del Maestro. "Slit." In Encyclopedia of Cancer, 1–4. Berlin, Heidelberg: Springer Berlin Heidelberg, 2015. http://dx.doi.org/10.1007/978-3-642-27841-9_5351-2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Werbowetski-Ogilvie, Tamra E., Mohamad Seyed Sadr, and Rolando F. Del Maestro. "Slit." In Encyclopedia of Cancer, 4254–57. Berlin, Heidelberg: Springer Berlin Heidelberg, 2015. http://dx.doi.org/10.1007/978-3-662-46875-3_5351.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Werbowetski-Ogilvie, Tamra E., Rolando F. Del Maestro, and Mohamad Seyed Sadr. "Slit." In Encyclopedia of Cancer, 3436–39. Berlin, Heidelberg: Springer Berlin Heidelberg, 2011. http://dx.doi.org/10.1007/978-3-642-16483-5_5351.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Gellrich, Marcus-Matthias. "Basics." In The Slit Lamp, 1–20. Berlin, Heidelberg: Springer Berlin Heidelberg, 2013. http://dx.doi.org/10.1007/978-3-642-39793-6_1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Gellrich, Marcus-Matthias. "Biomicroscopy." In The Slit Lamp, 21–74. Berlin, Heidelberg: Springer Berlin Heidelberg, 2013. http://dx.doi.org/10.1007/978-3-642-39793-6_2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Gellrich, Marcus-Matthias. "Videography: Basics." In The Slit Lamp, 75–102. Berlin, Heidelberg: Springer Berlin Heidelberg, 2013. http://dx.doi.org/10.1007/978-3-642-39793-6_3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Gellrich, Marcus-Matthias. "Special Videography." In The Slit Lamp, 103–63. Berlin, Heidelberg: Springer Berlin Heidelberg, 2013. http://dx.doi.org/10.1007/978-3-642-39793-6_4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Gellrich, Marcus-Matthias. "Videographic Settings for Specific Diseases." In The Slit Lamp, 165–87. Berlin, Heidelberg: Springer Berlin Heidelberg, 2013. http://dx.doi.org/10.1007/978-3-642-39793-6_5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Gellrich, Marcus-Matthias. "History of the Slit Lamp." In The Slit Lamp, 189–210. Berlin, Heidelberg: Springer Berlin Heidelberg, 2013. http://dx.doi.org/10.1007/978-3-642-39793-6_6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Gooch, Jan W. "Slit Die." In Encyclopedic Dictionary of Polymers, 671. New York, NY: Springer New York, 2011. http://dx.doi.org/10.1007/978-1-4419-6247-8_10757.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Slti"

1

Weng-Geng Ho, Kwen-Siong Chong, Bah-Hwee Gwee, and Joseph S. Chang. "Low power sub-threshold asynchronous QDI Static Logic Transistor-level Implementation (SLTI) 32-bit ALU." In 2013 IEEE International Symposium on Circuits and Systems (ISCAS). IEEE, 2013. http://dx.doi.org/10.1109/iscas.2013.6571853.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Silva, Luiz Sérgio Plácido da, Suzana Cândido de Barros Sampaio, Renata Teles Moreira, and Alexandre M. L. Vasconcelos. "Análise Qualitativa entre a Instrução Normativa IN/SLTI/MPOG 04/2014 e o Modelo CMMI-DEV." In 14th CONTECSI International Conference on Information Systems and Technology Management. TECSI, 2017. http://dx.doi.org/10.5748/9788599693131-14contecsi/rf-4787.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Da Silva, Luiz Sérgio P., Renata Teles Moreira, and Alexandre M. L. De Vasconcelos. "Análise Qualitativa da Aderência entre a Instrução Normativa IN/SLTI/MPOG 04/2014 e os Modelos CMMI." In XII Simpósio Brasileiro de Sistemas de Informação. Sociedade Brasileira de Computação, 2016. http://dx.doi.org/10.5753/sbsi.2016.5956.

Full text
Abstract:
Diversas iniciativas têm surgido na busca da melhoria de processos de software e serviços nos últimos anos. Essas iniciativas são orientadas por Normas, Modelos e Padrões de Qualidade, tendo como objetivo estabelecer melhores práticas para orientar a definição de processos e apoiar a avaliação da maturidade e capacidade das organizações. Apesar destas iniciativas, quando o assunto refere-se ao processo de contratação de soluções de tecnologia da informação (TI) pela Administração Pública Federal (APF), principal contratante de software e serviços no Brasil, a aplicação de melhores práticas em organizações públicas brasileiras encontra diversos obstáculos. Dentre estes, destacam-se: a complexidade dos processos e a contínua fiscalização dos órgãos de controle. Para minimizar esses obstáculos, o Tribunal de Contas da União (TCU), recomendou a elaboração da Instrução Normativa SLTI/MPOG 04/2014, contendo diretrizes para o processo de contratação de Soluções de TI e o Guia de Contratação de Soluções de TI (GCSTI). Este trabalho visa identificar a maturidade e a aderência do GCSTI em relação aos Modelos CMMI. Para isto, foi realizado um mapeamento entre o Guia GCSTI e os modelos CMMI-ACQ, CMMI-DEV e CMMI-SVC.
APA, Harvard, Vancouver, ISO, and other styles
4

Pereira, Ewerton Dias Leal, and Max Lira Veras Xavier de Andrade. "O uso BIM para a avaliação da eficiência energética de projetos de edifícios públicos com a aplicação da INI-C." In SIMPÓSIO BRASILEIRO DE TECNOLOGIA DA INFORMAÇÃO E COMUNICAÇÃO NA CONSTRUÇÃO. Antac, 2021. http://dx.doi.org/10.46421/sbtic.v3i00.631.

Full text
Abstract:
Desde 2014, a Instrução Normativa SLTI/MPOG nº 2, de 5 de junho de 2014, determina que obras de retrofit e projetos de edificações públicas federais obtenham a ENCE do PBE Edifica. Neste cenário, este trabalho pretende avaliar a metodologia de avaliação energética da INI-C, a partir da simulação computacional, para a determinação do nível de eficiência energética de um edifício da Universidade Federal de Pernambuco. Para esse artigo, que apresenta um trabalho ainda em desenvolvimento, espera-se avaliar como duas plataformas BIM (Revit e Archicad) são capazes de serem usadas para a avaliação da eficiência energética do edifício, a partir do INC C. Os resultados mostram que, apesar dos avanços em cada uma dessas Plataformas, estas ainda não permitem serem aplicadas integralmente na avaliação da eficiência energética de edificações públicas, atendendo à norma INI-C.
APA, Harvard, Vancouver, ISO, and other styles
5

Silva,, Luiz, Renata Moreira, and Suzana Sampaio. "Uma Estratégia para Mapear os Processos de Contratação de Soluções de TI da IN/SLTI/MPOG 04/2014 da Administração Pública Federal Brasileira com Base na Constelação CMMI." In XIII Simpósio Brasileiro de Sistemas de Informação. Sociedade Brasileira de Computação, 2017. http://dx.doi.org/10.5753/sbsi.2017.6058.

Full text
Abstract:
Iniciativas têm surgido na busca da melhoria de processos de software e serviços nos últimos anos. Essas iniciativas são orientadas por Normas, Modelos e Padrões de Qualidade, tendo como objetivo estabelecer melhores práticas para orientar a definição de processos e apoiar a avaliação da maturidade e capacidade das organizações. Apesar do surgimento destas iniciativas, quando o assunto refere-se ao processo de contratação de soluções de tecnologia da informação (TI) pela Administração Pública Federal (APF), principal contratante de software e serviços no Brasil, a aplicação de melhores práticas em organizações públicas brasileiras encontra diversos obstáculos. Dentre estes, destacam-se: a complexidade dos processos e a contínua fiscalização dos órgãos de controle. Para minimizar esses obstáculos, o Tribunal de Contas da União (TCU), recomendou a elaboração da Instrução Normativa SLTI/MPOG 04/2014, contendo diretrizes para o processo de contratação de Soluções de TI, apoiado pelo Guia de Contratação de Soluções de TI (GCSTI). Este trabalho tem como objetivo identificar a maturidade e a aderência do GCSTI em relação aos Modelos CMMI-ACQ, CMMI-DEV e CMMI-SVC. Para isto, foi utilizado como estratégia, um mapeamento, tendo como resultados a aderência dos processos do GCSTI da APF e os Modelos CMMI.
APA, Harvard, Vancouver, ISO, and other styles
6

Zhong, Xiao-Lan, Yun-Song Zhou, Huai-Yu Wang, and Fu-He Wang. "The correlation between single-slit and inter-slit effects in a subwavelength metal double-slit device." In Photonics Asia 2010, edited by Yunlong Sheng, Chongxiu Yu, and Linsen Chen. SPIE, 2010. http://dx.doi.org/10.1117/12.871671.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Schuhladen, S., K. Banerjee, M. Stuermer, P. Mueller, U. Wallrabe, and H. Zappe. "Scannable optofluidic slit." In 2014 IEEE Photonics Conference (IPC). IEEE, 2014. http://dx.doi.org/10.1109/ipcon.2014.6995267.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Zheng, Xiaofen, and Scott D. Metzler. "Adaptive optimization of slit width for a slit-slat collimator." In 2012 IEEE Nuclear Science Symposium and Medical Imaging Conference (2012 NSS/MIC). IEEE, 2012. http://dx.doi.org/10.1109/nssmic.2012.6551490.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Fueki, Ryutaro, and Koji Takahashi. "Fatigue Limit Improvement by Needle-Peening for Stainless Steel Welded Joint Containing a Crack-Like Defect." In ASME 2016 Pressure Vessels and Piping Conference. American Society of Mechanical Engineers, 2016. http://dx.doi.org/10.1115/pvp2016-63420.

Full text
Abstract:
The effects of needle-peening on the bending fatigue limit of an austenitic stainless steel JIS-SUS316 welded joint containing an artificial semi-circular slit on the weld toe were investigated. Peening was applied to specimens with a semi-circular slit at depths of a = 1.0 mm and 1.5 mm. Then, plane bending fatigue tests were carried out at a stress ratio of R = 0. The fatigue limits of welded specimens containing a semi-circular slit were increased for the peened specimens. Peened specimens with slit sizes of a = 1.0 mm had high fatigue limits that were nearly equal to those of non-slit, peened specimens. We observed that a semicircular slit with a depth of less than a = 1.0 mm could be rendered harmless by peening. Additionally, the values of fatigue limit and the maximum depth of a semi-circular slit that can be rendered harmless by peening were predicted based on fracture mechanics, where we assume that a semi-circular slit is equivalent to a semi-circular crack. The prediction results were consistent with experimental results.
APA, Harvard, Vancouver, ISO, and other styles
10

Hashimoto, Shigehiro. "Micro Machined Slit Between Ridge and Groove in Micro Fluid-Channel to Measure Floating Cell Deformability." In ASME 2020 Fluids Engineering Division Summer Meeting collocated with the ASME 2020 Heat Transfer Summer Conference and the ASME 2020 18th International Conference on Nanochannels, Microchannels, and Minichannels. American Society of Mechanical Engineers, 2020. http://dx.doi.org/10.1115/fedsm2020-20073.

Full text
Abstract:
Abstract A micro-slit has been designed to measure deformation of a biological single cell passing through the slit. At the middle part of the flow channel, the slit (7 μm height, 0.4 mm width, and 0.1 mm length) has been made by photolithography technique: the combination of the micro-ridge on the transparent polydimethylsiloxane plate and the micro-groove on the glass plate. C2C12 (mouse myoblast cells) was used in the test. The flow of suspension of cells was controlled by the pressure head between the inlet and the outlet. Deformation of cells passing through the micro slit was observed with an inverted phase-contrast microscope. The experimental results show that a cell deforms to the flat circular disk and passes through the micro-slit. Although smaller cells tend to pass the micro-slit easily, some bigger cells also passed the micro-slit. Deformation ratio is independent of the size of each cell. The designed slit has capability to detect quantitative deformability of a single biological cell.
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Slti"

1

D'Arcy, Richard, and Alexander Shemyakin. Calculation of the effect of slit size on emittance measurements made by a two-slit scanner. Office of Scientific and Technical Information (OSTI), March 2015. http://dx.doi.org/10.2172/1480125.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Liu C., D. Gassner, M. Minty, and P. Thieberger. Multi-slit based emittance measurement study for BNL ERL. Office of Scientific and Technical Information (OSTI), October 2012. http://dx.doi.org/10.2172/1054184.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Liu C., D. Gassner, M. Minty, and P. Thieberger. Multi-slit Based Emittance Measurement Study for BNL ERL. Office of Scientific and Technical Information (OSTI), October 2012. http://dx.doi.org/10.2172/1062009.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Aldrich, Susan. SLI Systems Learning Search Ecommerce January 2008. Boston, MA: Patricia Seybold Group, February 2008. http://dx.doi.org/10.1571/pr02-14-08cc.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Lozier, Daniel W., and Peter R. Turner. Parallel and serial implementations of SLI arithmetic. Gaithersburg, MD: National Institute of Standards and Technology, 1995. http://dx.doi.org/10.6028/nist.ir.5660.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Anuta, M. A., D. W. Lozier, N. Schabanel, and P. R. Turner. Basic linear algebra operations in SLI arithmetic. Gaithersburg, MD: National Institute of Standards and Technology, 1996. http://dx.doi.org/10.6028/nist.ir.5811.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Collard, L. B. Subsidence Sensitivity Study for Low-Level Waste in Slit Trenches. Office of Scientific and Technical Information (OSTI), February 2003. http://dx.doi.org/10.2172/807925.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Collard, L., and L. Luther Hamm. SPECIAL ANALYSIS OF OPERATIONAL STORMWATER RUNOFF COVERS OVER SLIT TRENCHES. Office of Scientific and Technical Information (OSTI), December 2008. http://dx.doi.org/10.2172/946161.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Rossettos, John N. A Micromechanical Model for Slit Damaged Braided Fabric Air-Beams. Fort Belvoir, VA: Defense Technical Information Center, May 2004. http://dx.doi.org/10.21236/ada424913.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Taylor, G. A., and R. A. Hiergesell. Benchmarking Exercises To Validate The Updated ELLWF GoldSim Slit Trench Model. Office of Scientific and Technical Information (OSTI), November 2013. http://dx.doi.org/10.2172/1104929.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Slti' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography