Relevant bibliographies by topics / Small CNC milling machine

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers

Academic literature on the topic 'Small CNC milling machine'

Author: Grafiati
Published: 4 June 2021
Last updated: 1 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Small CNC milling machine.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Small CNC milling machine"

1

Luo, Yong Xin, Xiao Long Shen, Hua Long, and Lai Xi Zhang. "Research on Milling Stability Using CNC Small Size Tool." Advanced Materials Research 199-200 (February 2011): 1993–98. http://dx.doi.org/10.4028/www.scientific.net/amr.199-200.1993.

Full text
Abstract:
In a larger-power CNC milling machine, the milling stability of CNC small size tool which is less than φ 25 diameters is restricted under a certain degree. Authors studied CNC milling chatter stability by the experiment and simulation; they had researched those influences of tool’s diameter, suspended length and craft of manufacturing system on chatter stability domain. Researches show that the larger diameter and shorter suspended length of the tool can improve the stability of milling, and also can improve critical axial cutting depth. The lobes of chatter stability domain can forecast effec
APA, Harvard, Vancouver, ISO, and other styles
2

Nugroho, Wasis, Damhuji Rifai, Aminul Hakim Embong, et al. "Development of CNC Milling Machine for Small Scale Industry." IOP Conference Series: Materials Science and Engineering 1068, no. 1 (2021): 012017. http://dx.doi.org/10.1088/1757-899x/1068/1/012017.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Liu, Xin, and Wei Fan. "Application of Accuracy Engraving Technique in the Complex Curved Surface Mould Processing." Advanced Materials Research 605-607 (December 2012): 133–36. http://dx.doi.org/10.4028/www.scientific.net/amr.605-607.133.

Full text
Abstract:
The advantages of the precise carving techniques in complex curved surface mould processing are studied. The small tools of carved machine can realize the small size processing which is unachievable for CNC and NC milling machine. The method using accuracy engraving machine to manufacture complex curved surface mould with small features is proposed, so the speed of mould processing is accelerated, the cost of new product development is decreased, the rapid manufacturing is realized and the traditional design method using only CNC and milling machine is improved. Finally, this method has been a
APA, Harvard, Vancouver, ISO, and other styles
4

Sima, Zhong Wen, Hai Yun Zhang, and Yu Gang Zhao. "Research of the Three Coordinates Miniature CNC Milling Machine." Applied Mechanics and Materials 229-231 (November 2012): 551–54. http://dx.doi.org/10.4028/www.scientific.net/amm.229-231.551.

Full text
Abstract:
An open three coordinates computer numerical control (CNC) system was developed, which was based on PC and PMAC motion controller. A three coordinate's miniature CNC milling machine was researched with a simple structure, low cost, small volume and suitability for teaching, and so on. Meanwhile the CNC system had the advantages of 3-axis linkage, program editing, manual operation, inching operation, simulation processing operation, automatic operation and dynamic display of the trace. The system is based on the Windows XP platform and it is convenient to manipulate with friendly interface.
APA, Harvard, Vancouver, ISO, and other styles
5

Nastac, Silviu. "On Vibration Joint Time-Frequency Investigations of CNC Milling Machines for Tool Trajectory Task Conformity Estimation." Shock and Vibration 2018 (October 10, 2018): 1–9. http://dx.doi.org/10.1155/2018/7375057.

Full text
Abstract:
This study deals with estimation of milling shape accuracy and trajectory conformity for small CNC 3D milling machines, based on vibration monitoring during the regular working cycles. The author made a large number of experimental tests, acquiring the acceleration signals, both on the milling tool-holder and on the bed frame. In order to evaluate the appropriate spectral characteristics of different machine parts and their weights on equipment dynamics, it was analyzed both the complete and the partial working cycle (such as forward tool motion, with or without effective milling, with or with
APA, Harvard, Vancouver, ISO, and other styles
6

Mohd Hadzley, Abu Bakar, Muhammad Hafiz Samsudin, Mohd Najib Zamri, Raja Izamshah Raja Abdullah, Mohd Shahir Kasim, and Abu Abdullah. "Development of Three-Axis Mini Milling Machine for Small Scale Production." Applied Mechanics and Materials 761 (May 2015): 273–76. http://dx.doi.org/10.4028/www.scientific.net/amm.761.273.

Full text
Abstract:
This paper presents the processes to develop a cost-effective small scale 3-axis CNC milling machine. The designed machine tool consisted of stepper motors, bearing, linear guide, ball screw mounting systems, inverter and electronic controller, in which all of these are assembled together in a form of 3-axis operating system. The machine has a built up with the size of 1000 mm (length) × 1000 mm (width) × 650 mm (long) accompanied with a worktable with a dimension of 300 mm (length) × 300 mm (width) × 20 mm (long), and 24,000 rpm maximum spindle speed. To control the movement of the machine, o
APA, Harvard, Vancouver, ISO, and other styles
7

Martinov, Georgi M., Akram Al Khoury, and Ahed Issa. "An approach of developing low cost ARM based CNC systems by controlling CAN drives." MATEC Web of Conferences 224 (2018): 01020. http://dx.doi.org/10.1051/matecconf/201822401020.

Full text
Abstract:
Nowadays, there is a big demand on using small sized CNC machine tools, which have low price tag, wide range of implementations, low manufacturing costs and can be used for educational purposes. These machines can achieve casual manufacturing routines, like milling and drilling in applications, where there is no need for high speed performances and super quality of products. In this work, we proposed a model of CNC for these machines and analysed its components and efficiency. The model consists of three main layers: CNC system (application layer), ARM based microcomputer as CAN master and con
APA, Harvard, Vancouver, ISO, and other styles
8

O¨zel, Cihan, Ali I˙nan, and Latif O¨zler. "An Investigation on Manufacturing of the Straight Bevel Gear Using End Mill by CNC Milling Machine." Journal of Manufacturing Science and Engineering 127, no. 3 (2005): 503–11. http://dx.doi.org/10.1115/1.1863256.

Full text
Abstract:
Accurate manufacturing of bevel gears is an important problem for small workshops because the module milling cutters used for manufacturing are not accurate enough for the task. In this study, manufacturing of straight bevel gears is investigated by using end mills in CNC milling with a vertical machining center. By using this method, use of auxiliary apparatus, special cutters (such as the circular cutter, the rack cutter, etc.), and special machine tools are not required. For the study, first the straight bevel gear was modeled by Tredgold’s approach and manufacturing equations of the straig
APA, Harvard, Vancouver, ISO, and other styles
9

Gołębski, Rafał, and Piotr Boral. "Study of Machining of Gears with Regular and Modified Outline Using CNC Machine Tools." Materials 14, no. 11 (2021): 2913. http://dx.doi.org/10.3390/ma14112913.

Full text
Abstract:
Classic methods of machining cylindrical gears, such as hobbing or circumferential chiseling, require the use of expensive special machine tools and dedicated tools, which makes production unprofitable, especially in small and medium series. Today, special attention is paid to the technology of making gears using universal CNC (computer numerical control) machine tools with standard cheap tools. On the basis of the presented mathematical model, a software was developed to generate a code that controls a machine tool for machining cylindrical gears with straight and modified tooth line using th
APA, Harvard, Vancouver, ISO, and other styles
10

Du, Yan Xia, Bao Zhan Lü та Feng Guo Bin. "Research on Milling Spiral Bevel Gear Using CТС Machine Tool". Advanced Materials Research 216 (березень 2011): 345–49. http://dx.doi.org/10.4028/www.scientific.net/amr.216.345.

Full text
Abstract:
From the NC machining principle of spiral bevel gear, the motion relationship of machine tool, cutter and workpiece during machining spiral bevel gear was analyzed. Based on the machine coordinate system, the tooth surface equation and the cone equation of cutting edges of spiral bevel gear were put forward. 3D solid model of spiral bevel gear was constructed using Pro/E Wildfire2.0 software. The NC milling simulation was carried out by the VERICUT software, and at the same time, the experiment was researched. Simulation and experimental results show that the spiral bevel gear can adopt the me
APA, Harvard, Vancouver, ISO, and other styles

Dissertations / Theses on the topic "Small CNC milling machine"

1

Son, Seung-Kil 1964. "A hybrid type small 5-axis CNC milling machine." Thesis, Massachusetts Institute of Technology, 2002. http://hdl.handle.net/1721.1/29275.

Full text
Abstract:
Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 2002.<br>Includes bibliographical references (leaves 116-119).<br>5-axis CNC milling machines are important in a number of industries ranging from aerospace to consumer-die-mold machining because they can deliver high machining accuracy with a spindle tilting capacity. Most of these machines have serial mechanisms so that low static and dynamic stiffness become very critical design issues especially for high speed machining. Parallel mechanisms have recently received attention from machine tool designers b
APA, Harvard, Vancouver, ISO, and other styles
2

Jagoš, Roman. "Konstrukce malé CNC frézky." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2012. http://www.nusl.cz/ntk/nusl-230234.

Full text
Abstract:
This master´s thesis deals with design of small CNC milling machines and comparing CNC tabletop milling machines in the world market. It is also done design of small CNC milling machine through the use of contemporary and modern trends, used in design of machine tools.
APA, Harvard, Vancouver, ISO, and other styles
3

Havlíček, Ondřej. "Návrh malé modelářské CNC frézky s pohyblivým stolem." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2019. http://www.nusl.cz/ntk/nusl-401057.

Full text
Abstract:
This master thesis deals with the constructional design of small CNC milling machine with a sliding table. The first part of the work describes small CNC milling machines currently available on the market. Based on the result of the literature review, the small CNC milling machine was constructed with respect to the currently available trends, including sizing and drawing documentation of the machine.
APA, Harvard, Vancouver, ISO, and other styles
4

Kovács, Zdeněk. "Návrh CNC frézky pro modelářské dílny." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2018. http://www.nusl.cz/ntk/nusl-382241.

Full text
Abstract:
This diploma thesis deals with the design of a CNC milling machine for the puspose of modeling workshop. In the first part is carried out the search in the field of small CNC milling machines for better familiarization with this issue. The information obtained in the first part of the thesis is used for determination the parameters of the designed machine. The last part deals with the design and realization in the form of a 3D model.
APA, Harvard, Vancouver, ISO, and other styles
5

Večeř, Petr. "Konstrukční návrh malé modelářské CNC frézky." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2016. http://www.nusl.cz/ntk/nusl-254333.

Full text
Abstract:
This thesis deals with the structural design of small model CNC milling machines. The work includes research modeller CNC milling machines available primarily on the Czech market, on whose basis are then selected the appropriate parameters for machine design. The thesis contains further structural calculations, selection of appropriate components, production drawings and 3D model that shows the final solution of constructed facility.
APA, Harvard, Vancouver, ISO, and other styles
6

Resiga, Alin. "Design Optimization for a CNC Machine." PDXScholar, 2018. https://pdxscholar.library.pdx.edu/open_access_etds/4257.

Full text
Abstract:
Minimizing cost and optimization of nonlinear problems are important for industries in order to be competitive. The need of optimization strategies provides significant benefits for companies when providing quotes for products. Accurate and easily attained estimates allow for less waste, tighter tolerances, and better productivity. The Nelder-Mead Simplex method with exterior penalty functions was employed to solve optimum machining parameters. Two case studies were presented for optimizing cost and time for a multiple tools scenario. In this study, the optimum machining parameters for milling
APA, Harvard, Vancouver, ISO, and other styles
7

Ebrahimi, S. Morteza K. "Dynamic modelling and simulation of a CNC milling machine." Thesis, Cardiff University, 1994. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.287909.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Ajilo, Deborah (Deborah M. ). "eyeDNA : Tool Condition Monitoring for a desktop CNC milling machine." Thesis, Massachusetts Institute of Technology, 2018. http://hdl.handle.net/1721.1/115670.

Full text
Abstract:
Thesis: S.M., Massachusetts Institute of Technology, Department of Mechanical Engineering, 2018.<br>Cataloged from PDF version of thesis.<br>Includes bibliographical references (pages 81-84).<br>Tool wear is a major obstacle to realizing full automation in metal cutting operations. In this thesis, we designed and implemented a low cost Tool Condition Monitoring (TCM) system using off-the-shelf sensors and data acquisition methods . Peripheral end milling tests were done on a low carbon steel workpiece and the spindle vibration, cutting zone temperature and spindle motor current were recorded.
APA, Harvard, Vancouver, ISO, and other styles
9

Hanzal, Jiří. "Návrh malé modelářské CNC frézky s pevným stolem." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2020. http://www.nusl.cz/ntk/nusl-433604.

Full text
Abstract:
The topic of this work is the design of a small model CNC milling machine with a fixed table for machining wood, plastic, or light alloys (Al, Zn, etc.). It also includes a calculation report and drawing documentation of selected nodes. The beginning of this work consists of an introduction to the issue of milling machines, their distribution and subsequent market analysis. Subsequently, the input parameters are designed on the basis of market analysis and in the last part there is a calculation report, the design of the milling machine itself and a short economic evaluation.
APA, Harvard, Vancouver, ISO, and other styles
10

Buš, Martin. "Návrh hobby CNC frézky." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2020. http://www.nusl.cz/ntk/nusl-417754.

Full text
Abstract:
This master thesis is focused on design of CNC hobby milling machine.In the first part of master thesis there are brief information about construction of CNC milling machines with varios types of milling machines available on market. After that, is made a selection of suitable machine componets for selected parameters. Futhermore, the masters thesis include a solutions of the component on all axes CNC milling machines.
APA, Harvard, Vancouver, ISO, and other styles

Books on the topic "Small CNC milling machine"

1

Sandhu, Harprit S. Spindles: Comprehensive Guide to Making Light Milling or Grinding Spindles with a Small Lathe (Workshop Practice Series). Trans-Atlantic Publications, 1997.

Find full text
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Small CNC milling machine"

1

Jabran, Sohaib, Shajee Ahmed, Sarmad Afzal, and Faizan Tariq. "Axes CNC Milling Machine." In Functional Reverse Engineering of Strategic and Non-Strategic Machine Tools. CRC Press, 2021. http://dx.doi.org/10.1201/9780367808235-5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Gordon, Seamus, and Michael T. Hillery. "Linear Motor based High Speed CNC milling Machine." In Proceedings of the 33rd International MATADOR Conference. Springer London, 2000. http://dx.doi.org/10.1007/978-1-4471-0777-4_80.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

El-Midany, T. T., I. M. Elewa, and A. Mostafa. "Design and Manufacturing of CNC Training Vertical Milling Machine." In Proceedings of the Twenty-eighth International. Macmillan Education UK, 1990. http://dx.doi.org/10.1007/978-1-349-10890-9_21.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Kumar, Narendra, Prashant K. Jain, Puneet Tandon, and Pulak M. Pandey. "Toolpath Generation for Additive Manufacturing Using CNC Milling Machine." In 3D Printing and Additive Manufacturing Technologies. Springer Singapore, 2018. http://dx.doi.org/10.1007/978-981-13-0305-0_7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Gurbuz, Riza. "Mechatronics Approach for Desk-Top CNC Milling Machine Design." In Solid State Phenomena. Trans Tech Publications Ltd., 2008. http://dx.doi.org/10.4028/3-908451-60-4.175.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Svetlík, Jozef, Juraj Kováč, Patrícia Dudová, Jozef Dobránsky, and Michal Považan. "Manufacturing Precision of the CNC Milling Machine with Three Controlled Axes." In Industry 4.0: Trends in Management of Intelligent Manufacturing Systems. Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-14011-3_8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Suh, Suk-Hwan, and Jung-Jae Lee. "Flank Milling of Ruled Surface with Additionally-Five-Axis CNC Machine." In Integrated Design and Manufacturing in Mechanical Engineering. Springer Netherlands, 1997. http://dx.doi.org/10.1007/978-94-011-5588-5_39.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Abdul Hamid, Rahimah, Wan Nur Amirah Wan Muhamad, Raja Izamshah, and Mohd Shahir Kasim. "Surface Roughness Analysis of Zirconia Dental Restoration Manufactured Through CNC Milling Machine." In Lecture Notes in Mechanical Engineering. Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-13-9539-0_36.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Ayala-Chauvin, Manuel, Fernando Saá, Ricardo Rodríguez, Carles Domènech-Mestres, and Genís Riba-Sanmartí. "Design and Construction of a Low Cost CNC Milling Machine for Woodworking." In Communications in Computer and Information Science. Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-71503-8_29.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Lamraoui, M., M. El Badaoui, and F. Guillet. "Chatter Detection in CNC Milling Processes Based on Wiener-SVM Approach and Using Only Motor Current Signals." In Mechanisms and Machine Science. Springer International Publishing, 2014. http://dx.doi.org/10.1007/978-3-319-09918-7_50.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Small CNC milling machine"

1

Nieszporek, Tadeusz. "Generating of Worm Gears of an Arbitrary Profile." In ASME 2011 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. ASMEDC, 2011. http://dx.doi.org/10.1115/detc2011-48297.

Full text
Abstract:
The helical surfaces of worms are most often formed using rotary tools, disk-type, finger-type, cup-type, or ring-type over the whole profile height. The form of machined surface is determined not only by the geometrical parameters and profile of the tool, but also by the tool type. Due to technological reasons, the tool most often has the axial action surface profile which is rectilinear, and much more rarely circular. The increasingly wide use of modern multi-axial CNC machine tools enable the development of technologies for machining helical surfaces of an arbitrary profile. The tool in thi
APA, Harvard, Vancouver, ISO, and other styles
2

Tapoglou, Nikolaos, Jörn Mehnen, Michael Doukas, and Dimitris Mourtzis. "Optimal Machining Parameter Selection Based on Real-Time Machine Monitoring Using IEC 61499 Function Blocks for Use in a Cloud Manufacturing Environment: A Case Study for Face Milling." In ASME 2014 International Manufacturing Science and Engineering Conference collocated with the JSME 2014 International Conference on Materials and Processing and the 42nd North American Manufacturing Research Conference. American Society of Mechanical Engineers, 2014. http://dx.doi.org/10.1115/msec2014-4022.

Full text
Abstract:
Optimization of manufacturing processes is one of the key challenges towards a sustainable manufacturing environment. The components manufactured nowadays are usually divided into small batches of highly customized parts. These parts are usually machined using the traditional approach for machining on CNC machines. This approach involves the creation of a static G-code for every component that is manufactured, which is dispatched to the machines either manually or through a LAN network. In this paper a new approach in machine tool programming is presented. The proposed system is based on IEC 6
APA, Harvard, Vancouver, ISO, and other styles
3

Rynes, Matthew, Leila Ghanbari, Jay Jia Hu, et al. "Principles of Computer Numerical Control Applied to Small Research Animal Surgical Procedures." In 2018 Design of Medical Devices Conference. American Society of Mechanical Engineers, 2018. http://dx.doi.org/10.1115/dmd2018-6959.

Full text
Abstract:
The tools and techniques available for systems neuroscientists for neural recording and stimulation during behavior have become plentiful in the last decade. The tools for implementing these techniques in vivo, however, have not advanced respectively. The use of these techniques requires the removal of sections of skull tissue without damaging the underlying tissue, which is a very delicate procedure requiring significant training. Automating a part of the tissue removal processes would potentially enable more precise procedures to be performed, and it could democratize these procedres for wid
APA, Harvard, Vancouver, ISO, and other styles
4

Post, Scott, and Curtis Boirum. "A Model Wind Turbine Design-Build-Test Project." In ASME 2011 International Mechanical Engineering Congress and Exposition. ASMEDC, 2011. http://dx.doi.org/10.1115/imece2011-62217.

Full text
Abstract:
This paper describes a semester-long class project for students in junior-level Fluid Mechanics courses. The goals of the project are to introduce students to engineering design and to incorporate material from other courses in engineering graphics, instrumentation and measurements, and manufacturing processes in a single project. Each team of 3–4 undergraduate students had to design, build, and test a scale model horizontal-axis wind turbine. The wind turbines were designed using solid modeling software, and constructed using either a rapid prototyping machine or a CNC milling machine. The wi
APA, Harvard, Vancouver, ISO, and other styles
5

Schieck, Frank, Reinhard Mauermann, Dieter Weise, and Matthias Demmler. "Single Point Incremental Forming of Large Sheet Metal Components." In ASME 2019 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2019. http://dx.doi.org/10.1115/imece2019-10390.

Full text
Abstract:
Abstract The production of complex, large-scale cladding parts made of metal in small quantities for a wide range of applications in architecture, power generation, shipbuilding, but also rail vehicle construction, mobile work machines and, last but not least, automotive sector is a major challenge in terms of principled manufacturability, but also in terms of manufacturing costs. Appropriate components are often produced in small quantities by hand, whereby the reproducibility and achievable quality depend largely on the experience and craftsmanship of the employer. The incremental forming us
APA, Harvard, Vancouver, ISO, and other styles
6

Garcia-Romeu, M. Luisa, Elisabetta Ceretti, Antonio Fiorentino, and Claudio Giardini. "Forming Force Prediction in Two Point Incremental Forming Using Backpropagation Neural Networks in Combination With Genetic Algorithms." In ASME 2010 International Manufacturing Science and Engineering Conference. ASMEDC, 2010. http://dx.doi.org/10.1115/msec2010-34142.

Full text
Abstract:
Process feasibility and material formability are two of the most concerning factors which are studied in Incremental Sheet Forming (ISF) process. They are two important matters under study of the scientific community with the final goal of improving the process performances and to make it reliable to allow its use for rapid prototyping and for small batch production. In recent years, the application of neural network techniques to forming processes has been a research topic for optimizing and predicting process parameters and ISF process has not been an exception. Unfortunately, there are some
APA, Harvard, Vancouver, ISO, and other styles
7

Choudhary, Rohit, Sambhav, Sunny David Titus, P. Akshaya, Jose Alex Mathew, and N. Balaji. "CNC PCB milling and wood engraving machine." In 2017 International Conference On Smart Technologies For Smart Nation (SmartTechCon). IEEE, 2017. http://dx.doi.org/10.1109/smarttechcon.2017.8358577.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Wang, Shu-yuan, Wei-min Wang, and Xin Zhang. "The extension of the function of CNC milling machine—Slotting key-groove replaced by CNC milling machine." In EM 2011). IEEE, 2011. http://dx.doi.org/10.1109/icieem.2011.6035271.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Fuzhong, Wu. "CNC Milling Machine Spindle Characteristics Analysis by FEM." In 2010 International Conference on Intelligent Computation Technology and Automation (ICICTA). IEEE, 2010. http://dx.doi.org/10.1109/icicta.2010.396.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Khan, Abdul Wahid, and Wuyi Chen. "Calibration of CNC milling machine by direct method." In International Conference of Optical Instrument and Technology, edited by Shenghua Ye, Guangjun Zhang, and Jun Ni. SPIE, 2008. http://dx.doi.org/10.1117/12.807066.

Full text
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography