Log in

Relevant bibliographies by topics / Smart materials. Maintainability (Engineering)

Contents

Journal articles
Dissertations / Theses
Books
Book chapters
Conference papers

Academic literature on the topic 'Smart materials. Maintainability (Engineering)'

Author: Grafiati

Published: 4 June 2021

Last updated: 8 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Smart materials. Maintainability (Engineering).'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Smart materials. Maintainability (Engineering)"

1

Scala, Christine M., Matthew E. Ibrahim, Alan R. Wilson, Darren P. Edwards, and V. Tan Truong. "Australian Defence Applications of Advanced Smart Materials Research." Materials Science Forum 654-656 (June 2010): 2079–82. http://dx.doi.org/10.4028/www.scientific.net/msf.654-656.2079.

Full text

Abstract:

This paper overviews some recent S&T innovations in smart materials and structures at the Australian Defence Science and Technology Organisation (DSTO) under a Corporate Enabling Research Program (CERP) on Signatures, Materials and Energy. The CERP program includes development and transitioning of technology across the maritime, air and land domains, with the major focus of the smart materials program component being to increase the safety, availability and maintainability of Defence assets. Three specific examples are provided of the smart materials and structures program, ranging across the spectrum of technology readiness from new concept phase to technology transitioning, viz.: (i) Advances in smart sensing for prognostics-based platform management; (ii) Fabrication of nanostructured and ultrafine grained materials through top-down severe plastic deformation processing of bulk materials; (iii) Innovative application of carbon nanotubes/conducting polymers as artificial muscles for low-power propulsion and control of small autonomous underwater systems. In each case, the DSTO effort is underpinned by strong university or industry linkages to deliver challenging interdisciplinary S&T.

APA, Harvard, Vancouver, ISO, and other styles

2

Pool, R. "Smart Living: Smart materials." Engineering & Technology 7, no. 6 (2012): 31. http://dx.doi.org/10.1049/et.2012.0617.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Wirsching, Paul H., Tony Y. Torng, John F. Geyer, and Bernhard Stahl. "Fatigue realibility and maintainability of marine structures." Marine Structures 3, no. 4 (January 1990): 265–84. http://dx.doi.org/10.1016/0951-8339(90)90012-g.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Amundarain, Aiert, Diego Borro, Alex García-Alonso, Jorge Juan Gil, Luis Matey, and Joan Savall. "Virtual reality for aircraft engines maintainability." Mécanique & Industries 5, no. 2 (March 2004): 121–27. http://dx.doi.org/10.1051/meca:2004076.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Pecht, Michael, and Anthony J. Rafanelli. "Product Reliability, Maintainability, and Supportability Handbook." Journal of Electronic Packaging 118, no. 3 (September 1, 1996): 188–89. http://dx.doi.org/10.1115/1.2792151.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Torng, T. Y., and P. H. Wirsching. "Fatigue and Fracture Reliability and Maintainability Process." Journal of Structural Engineering 117, no. 12 (December 1991): 3804–22. http://dx.doi.org/10.1061/(asce)0733-9445(1991)117:12(3804).

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

G.W.A.D. "Reliability and maintainability management." Microelectronics Reliability 26, no. 3 (January 1986): 571. http://dx.doi.org/10.1016/0026-2714(86)90508-1.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Bogdanowicz, Robert, and Dorota Bociaga. "Smart Engineering of New Materials." physica status solidi (a) 213, no. 5 (May 2016): 1107–8. http://dx.doi.org/10.1002/pssa.201670634.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Meier, Horst, Alexander Czechowicz, Christoph Haberland, and Sven Langbein. "Smart Control Systems for Smart Materials." Journal of Materials Engineering and Performance 20, no. 4-5 (July 2011): 559–63. http://dx.doi.org/10.1007/s11665-011-9877-4.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Sakata, Yusaku. "Smart Carbon Materials." Journal of the Japan Society of Powder and Powder Metallurgy 52, no. 2 (2005): 108. http://dx.doi.org/10.2497/jjspm.52.108.

Full text

APA, Harvard, Vancouver, ISO, and other styles

More sources

Dissertations / Theses on the topic "Smart materials. Maintainability (Engineering)"

1

Ibrahim, M. E. "Advanced applications of smart materials research for the enhancement of Australian defence capability." Fishermans Bend, Victoria : Defence Science and Technology Organisation, 2009. http://nla.gov.au/nla.arc-24764.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Taiwo, Adetoun. "SMART SUPERHYDROPHOBIC MATERIALS." VCU Scholars Compass, 2013. http://scholarscompass.vcu.edu/etd/3209.

Full text

Abstract:

Superhydrophobicity refers to surfaces with extremely large water droplet contact angles (usually greater than 150°). This phenomenon requires a hydrophobic material with micro or nano-scale roughness. Superhydrophobic surfaces exist in nature (e.g. the lotus leaf) and can be produced synthetically. This project focuses on the development and characterization of superhydrophobic materials with tunable wettability (i.e. smart superhydrophobic materials). In this study, surfaces were prepared by electrospinning thin, aligned polystyrene fibers onto a piezoelectric unimorph substrate. Results showed electric field induced changes in substrate curvature, which produced corresponding changes in surface wettability. From experiments, an average change in water contact angle of 7.2° ± 1.2° with 90% confidence was observed in ~2μm diameter fiber coatings electrospun for 5 minutes with applied electric field. In addition, fiber coatings electrospun with equivalent deposition showed average electric field induced changes in WCA of 2.5° ± 0.92° for lower diameter fibers (~1μm) and 3.5° ± 1.37° for higher diameter fibers (~2μm) with 90% confidence.

APA, Harvard, Vancouver, ISO, and other styles

3

Molloy, Paul. "Smart materials for subsea buoyancy control." Thesis, University of Glasgow, 2000. http://theses.gla.ac.uk/6161/.

Full text

Abstract:

Buoyancy control is needed in small autonomous underwater devices to enable greater flexibility in measurements in the ocean. This project has examined a number of ways in which buoyancy changes might be achieved. Firstly, an extensive review of the mechanisms by which various marine organisms control their buoyancy was undertaken. There is a tremendous diversity of natural buoyancy control mechanisms, but most of these mechanisms produce only slow (and small) changes in buoyancy. Studies were carried out on the behaviour of polymer gel systems that exhibit large volume changes under the influence of solvent composition and/or temperature. The effects of salinity were investigated, from 5 parts per thousand (ppt) to 35ppt, on hydrolysed polyacrylamide gels, over the temperature range of 5°C to 40°C. It was found that the gels decreased in volume in the solutions, this effect being most pronounced in the 35ppt solution. As temperature increased, the volume changes were observed to decrease. The cyclical volumetric strain behaviour of the polyacrylamide gels, by alternate exposure to saline solutions and distilled water, resulted in significant (~200%) volume changes induced over periods of 2 days. In a second study, the density change associated with the volumetric strain of polymeric materials was investigated in poly(N-isopropylacrylamide), NIPA, gels. The temperature-sensitive NIPA gels, immersed in distilled water or seawater solutions at temperatures ranging from 5°C to 50°C, exhibited volume changes of over 800%, and density changes of 30-40%. NIPA gels exhibit a faster response time than polyacrylamide gels, and their density and volume changes have potential application in buoyancy change. Experiments were also performed on NiTi shape memory alloys (SMA), which change in length and mechanical properties with temperature. A controllable parallel-plate device was constructed, linked by four helical SMA springs, which exerted significant axial forces with the application of temperature. The device is capable of producing substantial volume changes if contained in a suitable enclosure. It is currently on loan to the Science Museum, London, as part of a new exhibition of the Wellcome Wing.

APA, Harvard, Vancouver, ISO, and other styles

4

Kang, Inpil. "Carbon Nanotube Smart Materials." University of Cincinnati / OhioLINK, 2005. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1109710134.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Shelvay, Alicia M. (Alicia Margaret). "Reinforced concrete : applicability of smart materials." Thesis, Massachusetts Institute of Technology, 2012. http://hdl.handle.net/1721.1/74413.

Full text

Abstract:

Thesis (M. Eng.)--Massachusetts Institute of Technology, Dept. of Civil and Environmental Engineering, 2012.
Cataloged from PDF version of thesis.
Includes bibliographical references (p. 44-46).
With aging infrastructure, not only in the United States, but worldwide, we look toward designing structures which can withstand the test of time. Creating structures that can adapt to changes in the environment and provide better performance is at the forefront of current research. Reinforced concrete, one of the most widely used materials, can be reinvented using this philosophy. In this thesis, smart materials are classified as materials which can provide sensing, actuation or self-repair. Three different smart materials were studied including self-healing concrete which provides self-repair, shape memory alloys as reinforcement for reinforced concrete which provides actuation and carbon fiber reinforced concrete which provides sensing. It was found that each smart material had potential to improve the performance of reinforced concrete structures. Factors that affect larger scale implementation are discussed.
by Alicia M. Shelvay.
M.Eng.

APA, Harvard, Vancouver, ISO, and other styles

6

Ramesh, Prashanth. "Smart Materials for Electromagnetic and Optical Applications." The Ohio State University, 2012. http://rave.ohiolink.edu/etdc/view?acc_num=osu1343821988.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Wilson, Michael Thomas. "Technology advancement in intelligent buildings a through preplanning process pertaining to long-term maintainability /." Thesis, Available online, Georgia Institute of Technology, 2004:, 2004. http://etd.gatech.edu/theses/available/etd-08172004-150143/unrestricted/wilson%5Fmichael%5Ft%5F200412%5Fms.pdf.

Full text

Abstract:

Thesis (M.S.)--Building Construction, Georgia Institute of Technology, 2005.
Dr. Felix T. Uhlik III, Committee Member ; Mr. Cliff Stern, Committee Member ; Dr. Rita Oberle, Committee Member ; Ms. Kathy O. Roper, Committee Chair. Includes bibliographical references.

APA, Harvard, Vancouver, ISO, and other styles

8

Kang, Huaizhi. "Molecular engineering of nucleic acid towards functional and smart materials /." [Gainesville, Fla.] : University of Florida, 2009. http://purl.fcla.edu/fcla/etd/UFE0041192.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Dai, Xiaochuan. "Multifunctional Three-Dimensional Nanoelectronic Networks for Smart Materials and Cyborg Tissues." Thesis, Harvard University, 2015. http://nrs.harvard.edu/urn-3:HUL.InstRepos:23845480.

Full text

Abstract:

Nanomaterials provide unique opportunities at the interface between nanoelectronics and biology. “Bottom-up” synthesized nanowire(NW) with defined functionality can be assembled and enabled into three-dimensional(3D) flexible nanoelectronic networks. The micro- to nanoscale electronic units blur the distinction between electronics and cells/tissue in terms of length scale and mechanical stiffness. These unconventional 3D nanoelectronic networks can thus provide a path towards truly seamless integration of non-living electronics and living systems. In this thesis, I will introduce a general method for fabricating 3D macroporous NW nanoelectronic networks and their integration with hydrogel, elastomer and living tissues, with an emphasis on the realization of two-way communication between active nanoelectronics and the passive or living systems in which they are embedded. First, fabrication of 3D macroporous NW nanoelectronic networks will be described. Examples showing hundreds of individually addressable, multifunctional nanodevices fully distributed and interconnected throughout 3D networks will be illustrated. Proof-of-concept studies of macroporous nanoelectronic networks embedded through hydrogels and polymers demonstrate the ability for dynamically mapping pH gradients and strain fields. Second, a universal method to improve the long-term stability of semiconductor NWs in physiological environments using atomic layer deposition(ALD) of dielectric metal oxides shells on NW cores will be introduced. Long-term stability improvement by ALD of Al2O3 shells with different shell thickness and annealing conditions will be described and discussed. In addition, studies of semiconductor NW nanodevices with multilayer Al2O3/HfO2 shells indicates stability for up to two years in physiological solutions at 37◦C. Third, 3D macroporous nanoelectronic networks were integrated with synthetic cardiac tissues to build “cyborg” cardiac tissues. Spatiotemporal mapping of action potential(AP) propagating throughout 3D cardiac tissue was carried out with sub-millisecond time resolution, allowing investigation of cardiac tissue development and responses to pharmacological agents. These results have promised the applications of cyborg tissues in the fields ranging from fundamental electrophysiology and regenerative medicine to pharmacological studies. Finally, multifunctionallities of nanoelectronic devices for applications at the bio/nano interface will be discussed. Incorporation of NW field-effect-transistor(FET) and electrical stimulators in macroporous nanoelectronic networks demonstrates simultaneous recording and regulation of AP propagation in cyborg cardiac tissues. In addition, a convexed-NW FET bioprobe has been developed for simultaneous detection of AP and contraction force from individual cardiomyocyte. These explorations on the nanoelectronics functionalities highlight the capability to enable new communication modes between electronics and living tissues.
Chemistry and Chemical Biology

APA, Harvard, Vancouver, ISO, and other styles

10

Kwak, Seung-Keon. "New modeling and control design techniques for aircraft structural dynamics using smart materials /." The Ohio State University, 1999. http://rave.ohiolink.edu/etdc/view?acc_num=osu1488188894442033.

Full text

APA, Harvard, Vancouver, ISO, and other styles

More sources

Books on the topic "Smart materials. Maintainability (Engineering)"

1

Wang, Qun, ed. Smart Materials for Tissue Engineering. Cambridge: Royal Society of Chemistry, 2016. http://dx.doi.org/10.1039/9781782626756.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Wang, Qun, ed. Smart Materials for Tissue Engineering. Cambridge: Royal Society of Chemistry, 2017. http://dx.doi.org/10.1039/9781788010542.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

W, Chapman Paul. Smart sensors. Research Triangle Park, N.C: ISA, 1996.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

4

Engineering analysis of smart material systems. Hoboken, N.J: John Wiley & Sons, Inc., 2008.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

5

Khosravi, Ezat, Yusuf Yagci, and Yuri Savelyev, eds. New Smart Materials via Metal Mediated Macromolecular Engineering. Dordrecht: Springer Netherlands, 2009. http://dx.doi.org/10.1007/978-90-481-3278-2.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Horn, Gert. Integrated Smart Sensors: Design and Calibration. Boston, MA: Springer US, 1998.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

7

Holnicki-Szulc, Jan. Advances in Smart Technologies in Structural Engineering. Berlin, Heidelberg: Springer Berlin Heidelberg, 2004.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

8

Filimon, Anca. Smart Materials: Integrated Design, Engineering Approaches, and Potential Applications. Toronto ; New Jersey : Apple Academic Press, 2018.: Apple Academic Press, 2018. http://dx.doi.org/10.1201/9781351167963.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Soh, Chee-Kiong. Smart Materials in Structural Health Monitoring, Control and Biomechanics. Berlin, Heidelberg: Springer Berlin Heidelberg, 2012.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

10

David, Wagg, ed. Adaptive structures: Engineering applications. Chichester: John Wiley, 2007.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

More sources

Book chapters on the topic "Smart materials. Maintainability (Engineering)"

1

Yoon, Dong Jin, Sang Il Lee, Jaehwa Kwon, and Young Sup Lee. "Characteristics of Patch Type Smart-Piezo-Sensor for Smart Structures." In Key Engineering Materials, 2010–15. Stafa: Trans Tech Publications Ltd., 2005. http://dx.doi.org/10.4028/0-87849-978-4.2010.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Chung, Deborah D. L. "Intrinsically smart structural composites." In Engineering Materials and Processes, 253–84. London: Springer London, 2003. http://dx.doi.org/10.1007/978-1-4471-3732-0_13.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Choi, Seung Bok, and Kyung Su Kim. "Fatigue Properties of Smart Electrorheological Materials." In Key Engineering Materials, 1172–77. Stafa: Trans Tech Publications Ltd., 2005. http://dx.doi.org/10.4028/0-87849-978-4.1172.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Newkome, G. R., and G. R. Baker. "“Smart” Cascade Macromolecules." In Molecular Engineering for Advanced Materials, 59–75. Dordrecht: Springer Netherlands, 1995. http://dx.doi.org/10.1007/978-94-015-8575-0_4.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Maurya, Akhilesh Kumar, and Nidhi Mishra. "Polymeric Biomaterials in Tissue Engineering." In Functional and Smart Materials, 19–36. First edition. | Boca Raton, FL : CRC Press, 2020. |: CRC Press, 2020. http://dx.doi.org/10.1201/9780429298035-2.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Choi, Seung Bok, and Kyung Su Kim. "Tensile and Compressive Behaviors of Smart Electrorheological Materials." In Key Engineering Materials, 646–52. Stafa: Trans Tech Publications Ltd., 2005. http://dx.doi.org/10.4028/0-87849-978-4.646.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Kim, Jae Hwan, Woo Chul Jung, and Chun Suk Song. "Electro-Active Papers for Remotely-Driven Smart Actuators." In Key Engineering Materials, 1534–38. Stafa: Trans Tech Publications Ltd., 2005. http://dx.doi.org/10.4028/0-87849-978-4.1534.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Murayama, Hideaki, Kazuro Kageyama, Isamu Ohsawa, Makoto Kanai, Kiyhoshi Uzawa, and Tsuyoshi Matsuo. "Development of Smart Composite Panel with Optical Fiber Sensors." In Key Engineering Materials, 659–64. Stafa: Trans Tech Publications Ltd., 2005. http://dx.doi.org/10.4028/0-87849-978-4.659.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Wang, Z. L., and Z. C. Kang. "From Structural Units to Materials Engineering via Soft Chemistry." In Functional and Smart Materials, 223–57. Boston, MA: Springer US, 1998. http://dx.doi.org/10.1007/978-1-4615-5367-0_6.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Kim, Myung Hyun, Sung Won Kang, Jae Myung Lee, and Daniel J. Inman. "Simultaneous Health Monitoring and Vibration Control of Structures Using Smart Materials." In Key Engineering Materials, 2207–12. Stafa: Trans Tech Publications Ltd., 2005. http://dx.doi.org/10.4028/0-87849-978-4.2207.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Smart materials. Maintainability (Engineering)"

1

Brönnimann, Rolf, Marcel Held, and Philipp M. Nellen. "Reliability, availability, and maintainability considerations for fiber optical sensor applications." In Smart Structures and Materials, edited by Daniele Inaudi, Wolfgang Ecke, Brian Culshaw, Kara J. Peters, and Eric Udd. SPIE, 2006. http://dx.doi.org/10.1117/12.657872.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Mysore Srirama Prasad, Rakesh. "Smart Structures and Materials." In IABSE Conference, Kuala Lumpur 2018: Engineering the Developing World. Zurich, Switzerland: International Association for Bridge and Structural Engineering (IABSE), 2018. http://dx.doi.org/10.2749/kualalumpur.2018.0917.

Full text

Abstract:

<p>Piezoelectric crystals are smart materials used in the structures for better performance under vibrations. These crystals act as a vibration damper, which depends upon location, size of crystal and value of shunt resistors. The presented work was carried out to measure the effectiveness of the crystal in reducing the response of the structure. A steel frame was used with three above mentioned parameters. Three (0.5mm. 1.0mm, 1.5mm) thicknesses, four values of shunt resistors (2.2, 10, 33 and 67 ohms) and three locations on the model (Top, Middle, and Bottom). At first, free vibration tests were carried out with these parameters and with no piezoelectric crystals. From this test, it was found that, damping increased from 0.387% (No piezoelectric crystal case) to 4.4% with 1.5mm thickness, 2.2 ohms and bottom position. Further, keeping the 2.2 ohms as constant parameter, 50% Kobe Earthquake excitation was given with other two parameters varying (Total 10 cases). It was found that the peak response reduced from 1.05 g (No piezoelectric case) to 0.83 g (1.5mm thick crystal at bottom). Also, reduction in Arias Intensity was observed. The experimental studies confirmed that the piezoelectric crystals are very effective in reducing the response of the structure with increasing the damping.</p>

APA, Harvard, Vancouver, ISO, and other styles

3

Kim, Simon. "Passive control techniques in earthquake engineering." In Smart Structures & Materials '95, edited by Conor D. Johnson. SPIE, 1995. http://dx.doi.org/10.1117/12.208889.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Naaz, Tamanna, and Banafsha Rajput. "Smart Materials Build Smart Cities: ExploringMaterials for Smart wall facades." In 2020 Advances in Science and Engineering Technology International Conferences (ASET). IEEE, 2020. http://dx.doi.org/10.1109/aset48392.2020.9118184.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Hahn, K., T. Schmidt, D. Ortloff, J. Popp, A. Wagener, and R. Brück. "MEMS product engineering using fabrication process development tools." In Smart Materials, Nano-and Micro-Smart Systems, edited by Jung-Chih Chiao, Alex J. Hariz, David V. Thiel, and Changyi Yang. SPIE, 2008. http://dx.doi.org/10.1117/12.807705.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Novak, Lisa J., Kristi M. Grizzle, Sharon L. Wood, and Dean P. Neikirk. "Development of state sensors for civil engineering structures." In Smart Structures and Materials, edited by Shih-Chi Liu. SPIE, 2003. http://dx.doi.org/10.1117/12.482690.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Hosking, Nathan S., and Zahra Sotoudeh. "Energy Harvesting From Smart Materials." In ASME 2015 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2015. http://dx.doi.org/10.1115/imece2015-50768.

Full text

Abstract:

In this paper, we study fully coupled electromagnetic-elastic behaviors present in the structures of smart beams using variational asymptotic beam sections and geometrically exact fully intrinsic beam equations. We present results for energy harvesting from smart beams under various oscillatory loads in both the axial and transverse directions and calculate the corresponding deformations. The magnitude of these loads are varied to show the generalized trends produced by piezoelectric materials. Smart materials change mechanical energy to electrical energy; therefore, changing the structural dynamic behavior of the structure and its stiffness matrix. A smart structure can be designed to undergo larger loads without changing the surface area of the cross-section.

APA, Harvard, Vancouver, ISO, and other styles

8

Kuang, K. S. C., S. T. Quek, and M. Maalej. "Polymer-based optical fiber sensors for health monitoring of engineering structures." In Smart Structures and Materials, edited by Masayoshi Tomizuka. SPIE, 2005. http://dx.doi.org/10.1117/12.599349.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Martorell, F., A. Isalgue, F. C. Lovey, A. Yawny, and V. Torra. "Physical constraints in SMA applications. One study case: dampers in civil engineering." In Smart Materials, Nano-, and Micro-Smart Systems, edited by Alan R. Wilson. SPIE, 2004. http://dx.doi.org/10.1117/12.581503.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Chan, W. S., Y. L. Xu, X. L. Ding, Y. L. Xiong, and W. J. Dai. "Dynamic displacement measurement accuracy of GPS for monitoring large civil engineering structures." In Smart Structures and Materials, edited by Masayoshi Tomizuka. SPIE, 2005. http://dx.doi.org/10.1117/12.600410.

Full text

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!