Relevant bibliographies by topics / Sodium Hydroxide Method

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Sodium Hydroxide Method'

Author: Grafiati
Published: 5 June 2025
Last updated: 2 August 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Sodium Hydroxide Method.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Sodium Hydroxide Method"

1

Lavrov, R. V., N. V. Kuvardin, and S. Narmatov. "Physical and Chemical Activation of Quartz Raw Materials with Sodium Hydroxide in the Ratio of the Eutectic Composition in the Na2O – SiO2 System." Proceedings of the Southwest State University. Series: Engineering and Technology 13, no. 4 (2024): 152–62. http://dx.doi.org/10.21869/2223-1528-2023-13-4-152-162.

Full text
Abstract:
The purpose of this work was to continue research on the activation of quartz raw materials using alkali metal hydroxides. This paper presents a theoretical justification and practical confirmation of the physical and chemical activation of quartz raw materials by sodium hydroxide, taking into account the eutectic ratios in the Na2O–SiO2 system.Methods. Quartz glass sand VS-030-B was chosen as a source of quartz raw materials; as a sodium-containing raw material flake sodium hydroxide brand TR. For the scientific basis, the phase diagram of Na2O-SiO2 of Berezhny was used. To study the phase co
APA, Harvard, Vancouver, ISO, and other styles
2

Nakanishi, H., T. Ogata, Y. Kadotani, and Akira Izumi. "Wet-Etching Characteristics of SiCN Films Deposited by HWCVD Method." Advances in Science and Technology 81 (September 2012): 34–38. http://dx.doi.org/10.4028/www.scientific.net/ast.81.34.

Full text
Abstract:
We investigated the wet-etching properties of SiCN films using chemical agents. Our results show that sodium hydroxide, potassium hydroxide and phosphoric acid etch SiCN films, while hydrochloric acid, sulfuric acid, acetic acid, ammonium chloride and sodium chloride cannot etch SiCN films.
APA, Harvard, Vancouver, ISO, and other styles
3

Larisa, Alagić-Džambić, Dacić Minela, Bašić Kenan, et al. "Spectrophotometric Determination of Sulpiride in Pharmaceutical Products." Pharmaceutical and Chemical Journal 7, no. 4 (2020): 75–79. https://doi.org/10.5281/zenodo.13955707.

Full text
Abstract:
A simple spectrophotometric method was developed and validated for determination of Sulpiride in pharmaceutical products. The method was based using two different solvent: 0.1 mol/L sodium hydroxide and 0.1 mol/L hydrochloric acid. The absorbance maximum was at 291 nm. The correlation coefficient were r=0.9994 (in 0.1 mol/L sodium hydroxide as solvent) and r=1.0000 (in 0.1 mol/L hydrochloric acid as solvent). The method was validated and results obtained for the assay of three different brands of Sulpiride capsules, hard. The proposed method was successfully applied to the spectrophotometric d
APA, Harvard, Vancouver, ISO, and other styles
4

Zhang, Jian Wei, and Ji Wei Liu. "Preparation of Sodium Diacetate." Applied Mechanics and Materials 508 (January 2014): 79–82. http://dx.doi.org/10.4028/www.scientific.net/amm.508.79.

Full text
Abstract:
The sodium diacetate using acetic acid and sodium hydroxide as materials was prepared in which one-step liquid-phase method and microwave method were adopted in the paper. By single factor experiment, the regularities of the influence of various factors including reaction temperature, reaction time and acetic acid-sodium hydroxide ratio on the yield of sodium diacetate were studied. Through the orthogonal experiment the optimum synthesis conditions of sodium diacetate were confirmed that the reaction temperature was 70°C, the reaction time was 60min and the acetic acid-sodium hydroxide ratio w
APA, Harvard, Vancouver, ISO, and other styles
5

RAJABZODA, N. KH, N. A. NAIMOV, A. MURODIYON, KH A. MIRPOCHAYEV, S. M. SHOKARIMOV, and KH KH USMONOV. "PRODUCTION OF PILOT BATCHES OF CRYOLITE USING SODIUM CHLORIDE AND HYDROXIDE AND THEIR TESTING IN ALUMINIUM PRODUCTION." Herald of Technological University 27, no. 4 (2024): 57–61. http://dx.doi.org/10.55421/1998-7072_2024_27_4_57.

Full text
Abstract:
The paper presents the results of pilot batch production of cryolite using sodium chloride and sodium hydroxide by hydrochemical method, physical and chemical studies of the obtained products, as well as their testing in aluminium electrolysers with measurements of technological parameters before and after use. The conducted studies have shown that the process of production of a pilot batch of cryolite by hydrochemical method from hydrofluoric acid using aluminium hydroxide, sodium chloride and sodium hydroxide solutions proceeds at a temperature of 25 °C for 30-45 min. In this case, the yield
APA, Harvard, Vancouver, ISO, and other styles
6

Alghany K. lbraheem, Abed. "Spectrophotometric Assay of phenylphrine hydrochloride Viacuopling with Diazotised p-Nitroaniline, Application toPharmaceutical Preparation." Tikrit Journal of Pharmaceutical Sciences 5, no. 2 (2023): 182–91. http://dx.doi.org/10.25130/tjphs.2009.5.2.9.182.191.

Full text
Abstract:
Simple, sensitive and reproducible spectrophotometric method was developed in aqueous medium and applicated for the estimation of pheylephrine hydrochloride in nasal drop and tussilet syrup. The method is based on the formation of orange coloured azo dye from the coup I ing of pheylephrine hydrochloride (PPH) with diazotised p-nitroaniline in alkaline medium of sodium hydroxide and sodium carbonate. The intensity of absorbance for the resulting orange azao-dye was measured at 490 nm in sodium hydroxide and at 487 nm in sodium carbonate. Beer's law was obeyed in the concentration ranges of 10-2
APA, Harvard, Vancouver, ISO, and other styles
7

A., L. J. RAO, and K. MALIK A. "Spectrophotometric Method for Determination of Tetramethylthiuram Disulphide by Extraction of its Chromium Complex into Isobutyl Methyl Ketone." Journal of Indian Chemical Society Vol. 67, July 1990 (1990): 615–16. https://doi.org/10.5281/zenodo.6243585.

Full text
Abstract:
Department of Chemistry, Punjabi University,&nbsp;Patiala-147 002 <em>Manuscript received 27 March 1989, revised 29 January 1990,&nbsp;accepted 30 March 1990</em> Spectrophotometric Method&nbsp;for Determination of Tetramethylthiuram Disulphide by Extraction of its Chromium Complex into Isobutyl Methyl Ketone
APA, Harvard, Vancouver, ISO, and other styles
8

Mubarokah, Siti, Pada Mulia Raja, Rahimah, Rafael Remit Winardi, and Fachrizal. "PENGARUH PROSES NETRALISASI PADA SEMI VIRGIN RED PALM OIL DENGAN MENGGUNAKAN NATRIUM HIDROKSIDA (NaOH) TERHADAP KADAR ALB, KADAR KOTORAN DAN KADAR AIR." Jurnal Agro Fabrica 6, no. 1 (2024): 8–22. http://dx.doi.org/10.47199/jaf.v6i1.225.

Full text
Abstract:
This research aims to determine the effect of the sodium hydroxide (NaOH) neutralization process in semi virgin red palm oil on free fatty acid levels, dirt levels and water content. Efforts to obtain the best quality red palm oil can be done by administering sodium hydroxide (NaOH). The method used in this research was a non-factorial Completely Randomized Design (CRD) using the chemical Sodium Hydroxide (NaOH) with concentrations of 3%, 4% and 5% of the sample weight. Each chemical and its concentration was repeated in 3 repetition units. The types of observations carried out are ALB levels,
APA, Harvard, Vancouver, ISO, and other styles
9

He, Bing-Xuan, Yong Liang, Ze-Kun Fan, Lue-Wei Xu, De-Gang Liu, and Guo-Zuan Xu. "Dissolution Behavior of Sodium Phosphate in a Na3PO4–Na2WO4–NaOH Solution System." Minerals 12, no. 6 (2022): 732. http://dx.doi.org/10.3390/min12060732.

Full text
Abstract:
Sodium hydroxide autoclaving is the main method for smelting scheelite in China. In this method, sodium phosphate is added as an additive to realize the highly efficient decomposition of scheelite, and a crude sodium tungstate solution containing sodium phosphate and sodium hydroxide is obtained. In the subsequent process of ion exchange, phosphorus ions in the solution compete with the resin adsorption of tungstate, which reduces the adsorption capacity of the resin and endangers the purity of the subsequent sodium tungstate solution. To remove the phosphorus from crude sodium tungstate solut
APA, Harvard, Vancouver, ISO, and other styles
10

Xakimjonova, Mahbuba Xakimjonovna. "DEVELOPMENT OF SODIUM NITRITE EXTRACTION TECHNOLOGY USING CONVENTIONAL METHOD." INTERNATIONAL BULLETIN OF APPLIED SCIENCE AND TECHNOLOGY 3, no. 4 (2023): 830–32. https://doi.org/10.5281/zenodo.7863378.

Full text
Abstract:
Sodium nitrite (NaNO2) is an important nitrite salt widely used in various industries, including food, pharmaceuticals, and chemicals. The conventional method for sodium nitrite extraction involves the reaction of nitrite ions with sodium chloride (NaCl) and sodium hydroxide (NaOH) in aqueous solution. This article provides an overview of the conventional method for sodium nitrite extraction, including the reaction mechanism, process optimization, and industrial applications.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Sodium Hydroxide Method"

1

Takase, Kazuya, M. Terashima, and K. Yoshimura. "Development and practical application of unhairing method without using sulfide - 205." Verein für Gerberei-Chemie und -Technik e. V, 2019. https://slub.qucosa.de/id/qucosa%3A34133.

Full text
Abstract:
Content: Leather manufacturing industry uses a lot of water and chemicals, and it discharges large amounts of wastewater. The processing a large amounts of wastewater requires a huge cost. Therefore, reduction of amount of a pollution load in wastewater is a theme in many countries around the world. During the leather process, a lot of pollutants occur in the unhairing process. Some estimate that the amount of pollution generated in the unhairing process accounts for 70% of the entire leather manufacturing process. In this unhairing process, usually a large amount of sulfide is used. Sulfide is
APA, Harvard, Vancouver, ISO, and other styles
2

Alami, Jaafar el. "Recherche par des essais de traction lente des conditions de corrosion sous contrainte d'aciers faiblement allies." Paris, ENSAM, 1987. http://www.theses.fr/1987ENAM0006.

Full text
Abstract:
Validation et application d'une technique d'etude de la corrosion sous contraintes: l'essai de traction lente. Definition d'une procedure experimentale pour la preparation des eprouvettes et choix de conditions experimentales optimales. Confirmation par l'essai de traction lente des resultats obtenus dans le cas de deux aciers 10cd9-10 et z10cdnbv0-2 lors d'essais statiques. Application de la methode de traction lente a la recherche des conditions de fissuration a 95**(o)c de deux aciers utilises dans les turbines francaises (20cnd8 et 26ncdv14-7)
APA, Harvard, Vancouver, ISO, and other styles
3

Almlöf, Ambjörnsson Heléne. "Mercerization and Enzymatic Pretreatment of Cellulose in Dissolving Pulps." Doctoral thesis, Karlstads universitet, Institutionen för ingenjörs- och kemivetenskaper, 2013. http://urn.kb.se/resolve?urn=urn:nbn:se:kau:diva-26960.

Full text
Abstract:
This thesis deals with the preparation of chemically and/or enzymatically modified cellulose. This modification can be either irreversible or reversible. Irreversible modification is used to prepare cellulose derivatives as end products, whereas reversible modification is used to enhance solubility in the preparation of regenerated cellulose. The irreversible modification studied here was the preparation of carboxymethyl cellulose (CMC) using extended mercerization of a spruce dissolving pulp. More specifically the parameters studied were the effect of mercerization at different proportions of
APA, Harvard, Vancouver, ISO, and other styles

Books on the topic "Sodium Hydroxide Method"

1

Na₂CrO₄ from domestic chromite concentrates by an alkali-fusion method. U.S. Dept. of the Interior, Bureau of Mines, 1988.

Find full text
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Sodium Hydroxide Method"

1

Cowell, G. W., A. D. Martin, and B. K. Revtll. "A New Improved Method for the Determination of Sodium Hydroxide Current Efficiency in Membrane Cells." In Modern Chlor-Alkali Technology. Springer Netherlands, 1992. http://dx.doi.org/10.1007/978-94-011-2880-3_13.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Alam, Shaurav, Stephen Gordon, Blake Bassett, et al. "Three-Dimensional Printing of Fly Ash-Based Geopolymer Materials." In Lecture Notes in Civil Engineering. Springer Nature Switzerland, 2025. https://doi.org/10.1007/978-3-031-69626-8_2.

Full text
Abstract:
AbstractThis research aims to design and develop a proof-of-concept system for three-dimensional (3D) printing of fly ash-based geopolymer materials. The primary focus of this research was designing and creating a 3D printer capable of printing straight multi-layered geopolymer walls. The geopolymer mixture consists of fly ash, an industrial waste by-product, sand, sodium silicate, sodium hydroxide, and water. Through the controlled application of AC voltage, the natural resistance of the geopolymer causes heat generation through a phenomenon known as ohmic heating. This heating method rapidly
APA, Harvard, Vancouver, ISO, and other styles
3

Kumar, Sushant. "Sodium Hydroxide for Clean Hydrogen Production." In Clean Hydrogen Production Methods. Springer International Publishing, 2014. http://dx.doi.org/10.1007/978-3-319-14087-2_2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Chun Byung Sik, Yang Hyung Chil, Sagong Myung, and Song Chi Yong. "A study on the chemical and physical factors influencing compressive strength of grouting materials." In Proceedings of the 16th International Conference on Soil Mechanics and Geotechnical Engineering. IOS Press, 2005. https://doi.org/10.3233/978-1-61499-656-9-1177.

Full text
Abstract:
New type of tunnel driving method and tunnel aid method are not only in common use of subway constructions but also obtaining good results in Korea. Chemical groutings are one of the most popular methods for the ground improvement during tunneling. In this paper, a series of uniaxial compressive strength tests of grouting materials were carried out to examine the variation of compressive strength for homo-gel of grouting materials. It was observed that the compressive strength of Sodium Silicate-Cement Grouts varied depending upon mixing methods. The compressive strength of grouting materials
APA, Harvard, Vancouver, ISO, and other styles
5

"Acid–Base Titrimetry." In Practical Volumetric Analysis. The Royal Society of Chemistry, 2014. http://dx.doi.org/10.1039/bk9781849739146-00077.

Full text
Abstract:
The chemistry of acids and bases has been a subject of interest since the days of the alchemist, who exploited the properties of acids in an attempt to transmute base metals into gold. In this chapter a summary of acid–base chemistry is presented which is contextualised by the following practical activities: standardisation of sodium hydroxide; determination of the pH of vinegar; determination of the volatile acidity of white wine; determination of the pKa of 2-acetoxybenzoic acid; standardisation of hydrochloric acid; determination of the calcium carbonate content of eggshell; analysis of sod
APA, Harvard, Vancouver, ISO, and other styles
6

Leong, K. S., J. A. Magreen, Dr Lee Shyue Leong, and Dr Mohammad Abdul Mannan. "MIX DESIGN OF POLYMER CONCRETE FOR POTHOLE REPAIR." In Futuristic Trends in Construction Materials & Civil Engineering Volume 2 Book 11. Iterative International Publishers, Selfypage Developers Pvt Ltd, 2023. http://dx.doi.org/10.58532/v2bs11p1ch3.

Full text
Abstract:
The increased traffic load due to rapid urbanization causes pavement distresses resulting reduction of service life of flexible pavement. Pavement distress is harmful to road user and vehicle, and it causes accident. Polymer concrete having several advantages can be considered as alternative material for pothole repair. Thus, this study has focused on mix design development of polymer concrete through various performances. In this study, orthophthalic unsaturated polyester resin as binder, methyl ethyl ketone peroxide (MEKP) as hardener, acetone and lacquer thinner as diluent, fly ash, silica
APA, Harvard, Vancouver, ISO, and other styles
7

Technical, AACC. "Preparation and Standardization of Sodium or Potassium Hydroxide Solution." In AACC International Approved Methods. AACC International, 2009. http://dx.doi.org/10.1094/aaccintmethod-70-70.01.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Knicker, Heike, and Rüdiger Fründ. "Characterization of Nitrogen in Plant Composts and Native Humic Material by Natural-Abundance 15N CPMAS and Solution NMR Spectra." In Nuclear Magnetic Resonance Spectroscopy in Environment Chemistry. Oxford University Press, 1997. http://dx.doi.org/10.1093/oso/9780195097511.003.0022.

Full text
Abstract:
Soil organic matter (SOM) provides one of the major deposits for carbon and nitrogen on the surface of the Earth. It is continuously produced, mainly from dead plant material, by composting and humification processes. During these processes microorganisms thoroughly convert the starting material, which consists mostly of insoluble lignocelluloses. The end products of these processes in average middle-European soils, that contain typically 1 to 5% w/w of organic material, are clay–SOM complexes which are insoluble in all the usual organic and inorganic solvents. The standard aqueous sodium hydr
APA, Harvard, Vancouver, ISO, and other styles
9

"Whirling Disease: Reviews and Current Topics." In Whirling Disease: Reviews and Current Topics, edited by ERIC J. WAGNER. American Fisheries Society, 2002. http://dx.doi.org/10.47886/9781888569377.ch19.

Full text
Abstract:
&lt;EM&gt;ABSTRACT. &lt;/EM&gt;Whirling disease occurs in salmonid fishes infected by the myxosporean parasite &lt;em&gt;Myxobolus cerebralis&lt;/em&gt;. This review summarizes the literature regarding control and management of the disease. Suggested methods for killing the myxospore stage include thorough drying, heating for 10 min at 90°C, calcium hydroxide at more than 0.5% for 24 h, and calcium oxide or KOH at more than 0.25% for 24 h. Chlorine was also effective at 1600 ppm in 24-h exposure or 5,000 ppm in a 10-min exposure. Roccal (alkyl dimethylbenzylammonium chloride) at more than 200
APA, Harvard, Vancouver, ISO, and other styles
10

Oriakhi, Christopher O. "Volumetric Analysis." In Chemistry in Quantitative Language. Oxford University Press, 2009. http://dx.doi.org/10.1093/oso/9780195367997.003.0018.

Full text
Abstract:
Volumetric analysis is a chemical analytical procedure based on measurement of volumes of reaction in solutions. It uses titration to determine the concentration of a solution by carefully measuring the volume of one solution needed to react with another. In this process, a measured volume of a standard solution, the titrant, is added from a burette to the solution of unknown concentration. When the two substances are present in exact stoichiometric ratio, the reaction is said to have reached the equivalence or stoichiometric point. In order to determine when this occurs, another substance, th
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Sodium Hydroxide Method"

1

Soundararajan, Balaji, and Digby D. Macdonald. "Caustic Cracking of AISI 4340 Steel." In CORROSION 2004. NACE International, 2004. https://doi.org/10.5006/c2004-04572.

Full text
Abstract:
Abstract Fracture of AISI 4340 steel in concentrated sodium hydroxide solution has been monitored by measuring the coupling current that flows between the crack and the external surfaces and by using the Acoustic Emission Technique (AET). The result clearly shows that a positive current flows from the crack to the external cathodes (through the solution) during crack growth of AISI 4340 steel in concentrated sodium hydroxide solution at 70°C. The (electron) coupling current contains periodic noise that is attributed to fracture events occurring at the crack front, with the amplitude of the noi
APA, Harvard, Vancouver, ISO, and other styles
2

Duncan, J. B., J. R. Divine, C. F. Windisch, W. I. Winters, and K. G. Carothers. "Electrochemistry Corrosion Study for Tank 241-AY-102 Sludge." In CORROSION 2003. NACE International, 2003. https://doi.org/10.5006/c2003-03677.

Full text
Abstract:
Abstract The chemistry (sodium hydroxide and sodium nitrate concentrations) in the sludge region of the Hanford underground radioactive waste storage tank 241-AY-102, did not meet the requirements for corrosion control established in Technical Safety Requirements (TSR), Administrative Control (AC) 5.15, "Chemistry Control Program." Because there are no near-term alternatives available to correct the sludge chemistry, an understanding of the corrosion behavior of the waste in the sludge region of the tank was required. The sludge resides deep within the tank (at 60 ° Celsius) where its oxygen c
APA, Harvard, Vancouver, ISO, and other styles
3

Bain, Douglas I., John A. Kelly, and Kenneth L. Rossel. "An Update on Hydrogen Monitoring as a Method for Monitoring Corrosion in Steam Generating Systems." In CORROSION 1991. NACE International, 1991. https://doi.org/10.5006/c1991-91214.

Full text
Abstract:
Abstract A low rate of internal boiler corrosion leading to the formation of magnetite and hydrogen occurs naturally under normal boiler operating conditions. The corrosion rate can be elevated by changes in general or local boiler water chemistry conditions. The most commonly observed localized corrosion reaction in intermediate pressure boiler equipment is caustic corrosion caused by the accumulation of high concentrations of sodium hydroxide at local points on a tube surface either under a deposit or where film boiling is occurring. Hydrogen studies have found use in identifying and to a de
APA, Harvard, Vancouver, ISO, and other styles
4

Libre, Jr., Roneh Glenn D., Jason Maximino C. Ongpeng, and Julius Leaño Jr. "Mechanical Performance of Treated (Bamboo) Fiber Textile Using Wide-width Tensile Test." In IABSE Symposium, Tokyo 2025: Environmentally Friendly Technologies and Structures: Focusing on Sustainable Approaches. International Association for Bridge and Structural Engineering (IABSE), 2025. https://doi.org/10.2749/tokyo.2025.2397.

Full text
Abstract:
&lt;p&gt;Textile fiber reinforcement made of natural fibers provides a more environment-friendly approach by lowering the overall carbon footprint of construction. Bamboo Fiber Textiles (BFT) extracted from scrap &lt;i&gt;Bambusa blumeana &lt;/i&gt;(Bamboo) poles using 5 % Sodium Hydroxide solution and treated with 10% Aluminium Sulfate solution were used to twine cordages and plain textile grids. Bamboo cordages were subjected to direct tensile tests to determine the tenacity while plain grids with 20 mm spacing were subjected to tensile tests as described by ASTM D4595 or the Standard Test M
APA, Harvard, Vancouver, ISO, and other styles
5

Hopkins, Greg, and Brian Linnemann. "Case Studies of Dual-Laminate FRP in Severe Service Environments." In CORROSION 2004. NACE International, 2004. https://doi.org/10.5006/c2004-04607.

Full text
Abstract:
Abstract This paper will discuss design and fabrication methods of dual-laminate (thermoplastic lined) fiberglass construction as well as various case histories involving this type of equipment. The design and fabrication discussion will include construction techniques, thermoplastic selection, recognized design standards, thermoplastic bonding types, the fabrication sequence and advantages of dual-laminates. The case histories discussed include service environments containing sodium hypochlorite, high purity chemicals (both acids and bases), bromine, sodium hydroxide, concentrated hydrochlori
APA, Harvard, Vancouver, ISO, and other styles
6

Mickalonis, J. I. "Slow Strain Rate Testing of Carbon Steel in Solutions with High Nitrate Concentrations." In CORROSION 1997. NACE International, 1997. https://doi.org/10.5006/c1997-97130.

Full text
Abstract:
Abstract Processing of high-level nuclear waste for permanent disposal will cause changes to the present inhibited compositions at the Savannah River Site. Temperature and nitrate concentration may reach new high levels during salt dissolution in the carbon steel waste tanks with certain removal methods. Proper inhibitor concentrations are necessary to minimize the potential for nitrate-induced stress corrosion cracking to maintain the integrity of the waste tanks. Slow strain rate testing and potentiodynamic polarization were used to investigate whether stress corrosion cracking would initiat
APA, Harvard, Vancouver, ISO, and other styles
7

Singh Gaur, Raj P. "Scale Formation in Tungsten Chemical Process." In CORROSION 2007. NACE International, 2007. https://doi.org/10.5006/c2007-07060.

Full text
Abstract:
Abstract This paper pertains to the characterization and chemistry of scale formation occurring in an industrial tungsten chemical process. In tungsten process, scales typically form in filter presses, pipes (carrying various solutions and waste waters) and evaporation crystallizers. This paper presents our results on the scale that forms in a filter press. Scale is formed on the plate supporting filter cloth and located in the exit side of wash solution. Major constituents of the scale were two tantalum compounds: Na14(Ta0.715Nb0.285)12O37.31H2O and Na3Ta0.715Nb0.285O4. It is suspected that t
APA, Harvard, Vancouver, ISO, and other styles
8

Ikhsan Sugiarto, H., Rita Irmawaty, and Januarty Jaya Ekaputri. "Flexural Behavior of Hybrid Geopolymer Fly Ash Beams with Addition of PVA (Polyvinyl Alcohol) Fiber." In The 6th International Symposium on Infrastructure Development. Trans Tech Publications Ltd, 2025. https://doi.org/10.4028/p-g5u7of.

Full text
Abstract:
Using cement as the primary material for making concrete, around 7%-15%, requires a significant amount of energy and generates abundant waste, thus significantly impacting the environmental conditions. Innovative materials are needed as alternatives to cement. Fly ash, as an environmentally friendly material, can be a solution to minimize the use of cement. The selected fiber is Poly-Vinyl Alcohol (PVA) fiber due to its high tensile strength, which can effectively inhibit the rate of crack development occurring in the beams. The research process was divided into two stages: geopolymer mortar c
APA, Harvard, Vancouver, ISO, and other styles
9

Renner, Michael H. W. "Comparison of the Corrosion Behavior of Stainless Steel Weld Materials versus Base Metals in Numerous Chemical Environments." In CORROSION 2000. NACE International, 2000. https://doi.org/10.5006/c2000-00504.

Full text
Abstract:
Abstract Circumferential welds of stainless steels (SS) are frequently sites of preferred corrosion for several reasons. The paper deals with 3 different SS (AISI 321, 316 Ti, 317L) and their matching filler materials as well as overalloyed filler materials. The objective of this paper is to investigate whether overalloyed filler metals can resolve the observed corrosion problems. The corrosion behavior of these alloys in welded and unwelded condition was tested in numerous inorganic acids, sodium hydroxide and also with chemical and electrochemical test methods with regard to pitting resistan
APA, Harvard, Vancouver, ISO, and other styles
10

Firsova, Elena Germanovna. "PHYSICOCHEMICAL PROPERTIES OF THE MOLTEN SODIUM HYDROXIDE - IRON (III) HYDROXIDE SYSTEM." In Themed collection of papers from Foreign International Scientific Conference «Trends in the development of science and Global challenges» by HNRI «National development» in cooperation with AFP. January 2025. – Managua (Nicaragua). Crossref, 2025. https://doi.org/10.37539/250130.2025.22.54.005.

Full text
Abstract:
The solubility of iron (III) hydroxide in molten NaOH has been studied in the temperature range of 625-997 К and electrical conductivity of saturated mixtures has been determined by a conductometric method.
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Sodium Hydroxide Method"

1

Kittu, Leila R., and Ulf Riebesell. Report on data of ocean alkalinization mesocosm experiment in a temperate zone neritic system. OceanNets, 2025. https://doi.org/10.3289/oceannets_d5.7.

Full text
Abstract:
We hypothesize that responses of natural food webs will depend on the method of OAE applied (CO2-equilibrated vs. non-equilibrated), and on the environmental setting (nutrient conditions, community composition, etc.). During a 54-day mesocosm experiment in May – July 2022, we tested the potential biogeochemical impacts of Ocean Alkalinity Enhancement (OAE) on a temperate, mesotrophic pelagic community in the Raunefjord south of Bergen, Norway. Ten in situ pelagic mesocosms each with a volume of ~55 m3 were deployed in the fjord, enclosing a natural post-bloom plankton community. A CO2 non-equi
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Sodium Hydroxide Method' for particular source types:
Journal articles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography