Relevant bibliographies by topics / Software Subcommittee

Contents

  1. Journal articles
  2. Books
  3. Book chapters
  4. Conference papers

Academic literature on the topic 'Software Subcommittee'

Author: Grafiati
Published: 4 June 2021
Last updated: 15 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Software Subcommittee.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Software Subcommittee"

1

Green, Paul. "ISO Human-Computer Interaction Standards: Finding Them and What They Contain." Proceedings of the Human Factors and Ergonomics Society Annual Meeting 64, no. 1 (December 2020): 400–404. http://dx.doi.org/10.1177/1071181320641090.

Full text
Abstract:
An HFES Task Force is considering if, when, and which, HFES research publications should require the citation of relevant standards, policies, and practices to help translate research into practice. To support the Task Force activities, papers and reports are being written about how to find relevant standards produced by various organizations (e.g., the International Standards Organization, ISO) and the content of those standards. This paper describes the human-computer interaction standards being produced by ISO/IEC Joint Technical Committee 1 (Information Technology). Subcommittees 7 (Software and Systems Engineering) and 35 (User Interfaces), and Technical Committee 159, Subcommittee 4 (Ergonomics of Human-System Interaction), in particular, the contents of the ISO 9241 series and the ISO 2506x series. Also included are instructions on how to find standards using the ISO Browsing Tool and Technical Committee listings, and references to other materials on finding standards and standards-related teaching materials.
APA, Harvard, Vancouver, ISO, and other styles
2

Short, R. J. "Report on the Design Automation Standards Subcommittee." SIMULATION 44, no. 5 (May 1985): 252–53. http://dx.doi.org/10.1177/003754978504400508.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Smith, Terry R., Darwin Braund, Robert Lamb, Michael McGilliard, and Rodney Brown. "Report of the American Dairy Science Association Subcommittee on Standards for Publications with Reference to Computer Software." Journal of Dairy Science 70, no. 1 (January 1987): 209–10. http://dx.doi.org/10.3168/jds.s0022-0302(87)79996-2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

O'Malley, Andrew. "‘The Innocence Project’ – An Online Exhibition and Archive on Children and Comics in the 1940s and 1950s." International Research in Children's Literature 10, no. 1 (July 2017): 20–38. http://dx.doi.org/10.3366/ircl.2017.0216.

Full text
Abstract:
The 1940s and 1950s saw a widespread outcry over children's reading of comic books, most pronouncedly the often violent, gory and erotic crime and horror genres. Concern and outrage over the assumed effects of the ubiquitous magazines on young minds was expressed in a deluge of newspaper editorials, magazine articles, professional and academic journals, and elsewhere. A grassroots movement to restrict children's access to comics led to a Senate Subcommittee hearing in the US investigating links to juvenile delinquency and to legislation in several countries prohibiting the sale of certain comics to minors. Using Omeka publishing and exhibition software, this digital humanities project takes the form of an online exhibition and digital archive and considers the ways in which the comics crisis was structured around the idea of childhood innocence
APA, Harvard, Vancouver, ISO, and other styles
5

Rogers, Brandy J., and David V. Jáuregui. "Load Rating of Prestressed Concrete Girder Bridges." Transportation Research Record: Journal of the Transportation Research Board 1928, no. 1 (January 2005): 53–63. http://dx.doi.org/10.1177/0361198105192800106.

Full text
Abstract:
In light of the adoption of the load and resistance factor design (LRFD) philosophy by the AASHTO Subcommittee on Bridges and Structures, research efforts are under way to facilitate the transition from load factor rating (LFR) to load and resistance factor rating (LRFR) in New Mexico. Five prestressed concrete girder bridges, courtesy of the New Mexico bridge inventory, were rated with the BRASS-GIRDER and BRASS-GIRDER (LRFD) structural software. The objectives for this study were to evaluate and verify the BRASS (bridge rating and analysis of structural systems) software, to identify the source of dissension between LFR and LRFR rating factors, and to examine any trends in the rating factors as affected by bridge geometry. The comparison of LFR and LRFR focused on both flexure and shear for the strength limit state. The LRFR method generally yielded lower rating factors for flexure, with the longer-span bridges demonstrating a larger deviation between LFR and LRFR. The live load effects were identified as the major factor contributing to the difference in flexure ratings; the dead load effects and flexural resistance had little effect. The LRFR rating factors for shear also were generally lower than those produced by LFR. The discrepancy in the shear ratings was caused by both the live load effects and shear resistance. The dead load effects contributed little to the variation in LFR and LRFR rating factors for shear. Overall, the shear ratings controlled over those based on flexure.
APA, Harvard, Vancouver, ISO, and other styles
6

Williams, D. A. "NASA’S PLANETARY GEOLOGIC MAPPING PROGRAM: OVERVIEW." ISPRS - International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences XLI-B4 (June 14, 2016): 519–20. http://dx.doi.org/10.5194/isprs-archives-xli-b4-519-2016.

Full text
Abstract:
NASA’s Planetary Science Division supports the geologic mapping of planetary surfaces through a distinct organizational structure and a series of research and analysis (R&A) funding programs. Cartography and geologic mapping issues for NASA’s planetary science programs are overseen by the Mapping and Planetary Spatial Infrastructure Team (MAPSIT), which is an assessment group for cartography similar to the Mars Exploration Program Assessment Group (MEPAG) for Mars exploration. MAPSIT’s Steering Committee includes specialists in geological mapping, who make up the Geologic Mapping Subcommittee (GEMS). I am the GEMS Chair, and with a group of 3-4 community mappers we advise the U.S. Geological Survey Planetary Geologic Mapping Coordinator (Dr. James Skinner) and develop policy and procedures to aid the planetary geologic mapping community. GEMS meets twice a year, at the Annual Lunar and Planetary Science Conference in March, and at the Annual Planetary Mappers’ Meeting in June (attendance is required by all NASA-funded geologic mappers). Funding programs under NASA’s current R&A structure to propose geological mapping projects include Mars Data Analysis (Mars), Lunar Data Analysis (Moon), Discovery Data Analysis (Mercury, Vesta, Ceres), Cassini Data Analysis (Saturn moons), Solar System Workings (Venus or Jupiter moons), and the Planetary Data Archiving, Restoration, and Tools (PDART) program. Current NASA policy requires all funded geologic mapping projects to be done digitally using Geographic Information Systems (GIS) software. In this presentation we will discuss details on how geologic mapping is done consistent with current NASA policy and USGS guidelines.
APA, Harvard, Vancouver, ISO, and other styles
7

Moraru, Cristina, Arvind Varsani, and Andrew M. Kropinski. "VIRIDIC—A Novel Tool to Calculate the Intergenomic Similarities of Prokaryote-Infecting Viruses." Viruses 12, no. 11 (November 6, 2020): 1268. http://dx.doi.org/10.3390/v12111268.

Full text
Abstract:
Nucleotide-based intergenomic similarities are useful to understand how viruses are related with each other and to classify them. Here we have developed VIRIDIC, which implements the traditional algorithm used by the International Committee on Taxonomy of Viruses (ICTV), Bacterial and Archaeal Viruses Subcommittee, to calculate virus intergenomic similarities. When compared with other software, VIRIDIC gave the best agreement with the traditional algorithm, which is based on the percent identity between two genomes determined by BLASTN. Furthermore, VIRIDIC proved best at estimating the relatedness between more distantly-related phages, relatedness that other tools can significantly overestimate. In addition to the intergenomic similarities, VIRIDIC also calculates three indicators of the alignment ability to capture the relatedness between viruses: the aligned fractions for each genome in a pair and the length ratio between the two genomes. The main output of VIRIDIC is a heatmap integrating the intergenomic similarity values with information regarding the genome lengths and the aligned genome fraction. Additionally, VIRIDIC can group viruses into clusters, based on user-defined intergenomic similarity thresholds. The sensitivity of VIRIDIC is given by the BLASTN. Thus, it is able to capture relationships between viruses having in common even short genomic regions, with as low as 65% similarity. Below this similarity level, protein-based analyses should be used, as they are the best suited to capture distant relationships. VIRIDIC is available at viridic.icbm.de, both as a web-service and a stand-alone tool. It allows fast analysis of large phage genome datasets, especially in the stand-alone version, which can be run on the user’s own servers and can be integrated in bioinformatics pipelines. VIRIDIC was developed having viruses of Bacteria and Archaea in mind; however, it could potentially be used for eukaryotic viruses as well, as long as they are monopartite.
APA, Harvard, Vancouver, ISO, and other styles
8

Takezako, Naoki, Naohiro Sekiguchi, Satoshi Noto, Yoshitaka Ogino, Akiyoshi Miwa, and Takayuki Ikezoe. "Recombinant Human Thrombomodulin in the Treatment of Acute Myeloid Leukemia Patients Complicated By Disseminated Intravascular Coagulation: Results of a Multicenter, Retrospective Epidemiologic Study in Japan." Blood 124, no. 21 (December 6, 2014): 2875. http://dx.doi.org/10.1182/blood.v124.21.2875.2875.

Full text
Abstract:
Abstract Background: Thrombomodulin is a thrombin receptor that acts an important regulator of coagulation. Recombinant human thrombomodulin (rTM) is a promising anticoagulant that activates protein C, which leads to the inactivation of factor (F) Va and FVIIIa and decreased formation of thrombin. rTM has also been identified as a novel anticoagulant with a long half-life. When compared with heparin therapy, rTM therapy more significantly improves DIC and alleviates bleeding symptoms in DIC patients. However, it is unknown as to whether or not the treatment with rTM affects patient's outcome. Therefore, we retrospectively analyzed 88 patients with acute myeloid leukemia (AML) (except adult acute promyelocytic leukemia), who suffered from DIC and compared the outcomes between the patients with low molecular weight heparin (LMWH) therapy and with rTM in multi-center. Methods: The diagnosis of de novo AML patients was based on the morphology, histopathology, cytogenetics, expression of leukocyte-differentiation antigens, and the French-American-British (FAB) classification. The patients examined in the current study (aged 18–84 years) were diagnosed with AML from January 2004 to March 2013. Patients younger than 65 years of age were treated with idarubicin (12 mg/m2 per day) for 3 days (days 1–3) and cytarabine (100 mg/m2 per day) by continuous infusion for 7 days (days 1–7). Patients 65 years of age or older were treated with daunorubicin (40 mg/m2 per day) for 3 days (days 1–3) and 200 mg/m2 per day behenoyl cytarabine for 8 days (days 1–8). The continuous infusion of dalteparin sodium (75 IU/kg per day) or recombinant human thrombomodulin (380 U/kg per day) was used to treat DIC.The diagnostic criteria for DIC previously proposed by the Japanese Ministry of Health and Welfare (JMHW) were employed in this study. The criteria are based on a scoring system including the presence of underlying disease (0 or 1 points), organ failure (0 or 1 points), and the results of coagulation tests of fibrinogen (0 to 2 points), fibrin/fibrinogen degradation products (FDP, 0 to 3 points), and the prothrombin time (0 to 2 points). DIC is diagnosed when the DIC score is greater than 4.Comparisons between the qualitative variables were carried out using the Chi-square test. The survival probabilities were estimated by the Kaplan-Meier method, and differences in the survival distributions were evaluated using the log-rank test. These statistical analyses were performed with the software package Stata version 11 (StataCorp LP, College Station, TX, USA). For all analyses, the P values were 2-tailed, and a P value less than.05 was considered to be significant. Results: DIC developed in 88 patients. Median age of patients was 60 years (from 15 to 85) and median duration was 699 days (from 15 to 2552 days). 30 patients were treated with dalteparin sodium and 58 patients were treated with recombinant human thrombomodulin. The FAB subtypes, age distribution, major laboratory data (CBC, LDH, and CRP) were not significantly different between two groups. The duration of DIC treatment with rTM was significant shorter than that with LMWH (6.3 days vs 15.1 days, p <0.0001). The overall survival was superior in the rTM group compared with dalteparin sodium group (P=0.0425). Discussion: Patients with DIC resulting from sepsis or hematological malignancies can be successfully treated if sufficient treatments are offered. However, additional anti-coagulant treatments may be required in many cases because of life-threatening abnormal coagulation states. In Japan, LMWH has been recommended by the Japanese Society of Thrombosis Hemostasis/DIC subcommittee for the treatment of DIC because patients were less likely to bleed when treated with LMWH than with unfractionated heparin (UFH) (Level 2b). On the other hand, a randomized controlled study reported that rTM therapy improved DIC and relieved bleeding complications in DIC patients more significantly than UFH therapy. To the best of our knowledge, very few institutes compared rTM with heparin as a therapy for DIC during AML induction therapy. Here, we demonstrate that if patients develop DIC, their prognosis will be improved by the administration of rTM. Conclusion: We conclude that treatment with rTM is safe and efficient, when compared with LMWH. Based on this retrospective study, randomized control study could be attempted in the future. Figure 1 Figure 1. Disclosures No relevant conflicts of interest to declare.
APA, Harvard, Vancouver, ISO, and other styles
9

Moore, Travis R., Mark C. Pachucki, Larissa Calancie, Ariella R. Korn, Erin Hennessy, and Christina D. Economos. "Coalition-Committees as Network Interventions: Baseline Network Composition in Context of Childhood Obesity Prevention Interventions." Systems 9, no. 3 (September 3, 2021): 66. http://dx.doi.org/10.3390/systems9030066.

Full text
Abstract:
Community coalitions can address local issues with deep, historic, and contextual understanding that enables customized implementation of evidence-based strategies. The individuals within the coalition, their partnerships, and the social context is likely an important component of unraveling the challenges of implementation so interventions reach people in need. We focus on the relevance of baseline coalition-committee network (CCN), the networks of purposely formed subcommittees within community coalitions, structure as one of the moderating, theoretical links between community coalition social networks and intervention success. We explore the baseline composition and characteristics of five CCNs at the beginning of childhood obesity prevention interventions. Using a combination of social network, multidimensional scaling, and correspondence analyses, we examine the structure and heterogeneity of five CCNs, each consisting of a core group of stakeholders in the coalition and sometimes the broader community itself. Cross-sectional analyses are used to examine the composition of coalition-committees related to network density, centralization, hierarchy, and coalition demographics and characteristics. Results indicate that CCNs are patterned in their structure and characteristics, and we discuss whether adjustments to childhood obesity prevention interventions according to baseline structure and characteristics could be advantageous for intervention implementation. Together, these findings can inform future longitudinal investigations into CCN network structure.
APA, Harvard, Vancouver, ISO, and other styles
10

Costin, Aaron, Hanjin Hu, and Ronald Medlock. "Building Information Modeling for Bridges and Structures: Outcomes and Lessons Learned from the Steel Bridge Industry." Transportation Research Record: Journal of the Transportation Research Board, July 16, 2021, 036119812110186. http://dx.doi.org/10.1177/03611981211018691.

Full text
Abstract:
The recent push to adopt building information modeling (BIM) for bridges and structures in the transportation industry has encountered major barriers owing to the lack of standardization. Unlike the building industry that has the National BIM Standard®–United States (NBIMS-US™) as a formal open platform standard and guide for the development of interoperable BIM software, the transportation industry does not currently have a similar open platform standard to enable the creation of interoperable BIM software to serve the needs of transportation stakeholders. The purpose of this paper is to present the findings of the research for one of the first use cases and development of data exchange requirements and model view definitions in adopting the open platform NBIMS-US applied to bridges and structures for the U.S. transportation industry. A subcommittee of the American Association of State Highway and Transportation Officials and the National Steel Bridge Alliance Steel Bridge Collaboration was formed to conduct a pilot study into the creation of information delivery manuals (IDMs) for steel bridges. This study served as pilot for the development of future IDMs in the transportation industry. As a result, the current IDM for Steel Bridge Detailing and Fabrication serves as the starting point of TPF-5(372) BIM for Bridges and Structures development of the Design to Fabrication model view definition. Finally, this study provided the outcomes and recommendations needed to expedite the development of IDMs for other use cases in the bridge and transportation industry.
APA, Harvard, Vancouver, ISO, and other styles

Books on the topic "Software Subcommittee"

1

Office, General Accounting. Software development: Update on Department of Defense central design activities : fact sheet for the Chairman, Subcommittee on Defense, Committee on Appropriations, House of Representatives. Washington, D.C: The Office, 1988.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Technology, United States Congress House Committee on Science Subcommittee on. Solving the year 2000 software problem: Joint hearing before the Subcommittee on Technology of the Committee on Science and the Subcommittee on Government Management, Information, and Technology of the Committee on Government Reform and Oversight, U.S. House of Representatives, One Hundred Fourth Congress, second session, September 10, 1996. Washington: U.S. G.P.O., 1996.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

United, States Congress House Committee on Foreign Affairs Subcommittee on Economic Policy Trade and Environment. Export controls on mass market software: Hearing before the Subcommittee on Economic Policy, Trade, and Environment of the Committee on Foreign Affairs, House of Representatives, One Hundred Third Congress, first session, October 12, 1993. Washington: U.S. G.P.O., 1994.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

United States. Congress. House. Committee on the Judiciary. Subcommittee on Courts, Intellectual Property, and the Administration of Justice. Computer Software Rental Amendments Act: Hearing before the Subcommittee on Courts, Intellectual Property, and the Administration of Justice of the Committee on the Judiciary, House of Representatives, One Hundred First Congress, second session, on H.R. 2740, S. 198, and H.R. 5297 ... July 30, 1990. Washington: U.S. G.P.O., 1990.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

United, States Congress House Committee on Science Space and Technology Subcommittee on Science Research and Technology. High performance computing: Hearing before the Subcommittee on Science, Research, and Technology of the Committee on Science, Space, and Technology, U.S. House of Representatives, One Hundred First Congress, first session, October 3, 1989. Washington: U.S. G.P.O., 1989.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

United States. Congress. House. Committee on Science, Space, and Technology. Subcommittee on Science, Research, and Technology. High performance computing: Hearing before the Subcommittee on Science, Research, and Technology of the Committee on Science, Space, and Technology, U.S. House of Representatives, One Hundred First Congress, first session, October 3, 1989. Washington: U.S. G.P.O., 1989.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

United States. Congress. House. Committee on Science, Space, and Technology. Subcommittee on Science, Research, and Technology. High performance computing: Hearing before the Subcommittee on Science, Research, and Technology of the Committee on Science, Space, and Technology, U.S. House of Representatives, One Hundred First Congress, first session, October 3, 1989. Washington: U.S. G.P.O., 1989.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

United States. Congress. House. Committee on Science. Subcommittee on Technology. Solving the year 2000 software problem: Creating blueprints for success : hearing before the Subcommittee on Technology of the Committee on Science, U.S. House of Representatives, One Hundred Fourth Congress, second session, May 14, 1996. Washington: U.S. G.P.O., 1996.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

United, States Congress Senate Committee on Banking Housing and Urban Affairs Subcommittee on Financial Services and Technology. Year 2000 liability and disclosure: Hearing before the Subcommittee on Financial Services and Technology of the Committee on Banking, Housing, and Urban Affairs, United States Senate, One Hundred Fifth Congress, first session ... October 22, 1997. Washington: U.S. G.P.O., 1998.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

United States. Congress. House. Committee on Government Reform. Subcommittee on Government Management, Information, and Technology. Year 2000 computer problem: Did the world overreact, and what did we learn? : hearing before the Subcommittee on Government Management, Information, and Technology of the Committee on Government Reform and the Subcommittee on Technology of the Committee on Science, House of Representatives, One Hundred Sixth Congress, second session, January 27, 2000. Washington: U.S. G.P.O., 2000.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Software Subcommittee"

1

Bevan, Nigel. "International Standards for HCI." In Encyclopedia of Human Computer Interaction, 362–72. IGI Global, 2006. http://dx.doi.org/10.4018/978-1-59140-562-7.ch056.

Full text
Abstract:
The last 20 years have seen the development of a wide range of standards related to HCI (human-computer interaction). The initial work was by the ISO TC 159 ergonomics committee (see Stewart, 2000b), and most of these standards contain general principles from which appropriate interfaces and procedures can be derived. This makes the standards authoritative statements of good professional practice, but makes it difficult to know whether an interface conforms to the standard. Reed et al. (1999) discuss approaches to conformance in these standards. ISO/IEC JTC1 has established SC35 for user interfaces, evolving out of work on keyboard layouts. This group has produced standards for icons, gestures, and cursor control, though these do not appear to have been widely adopted. More recently, usability experts have worked with the ISO/IEC JTC1 SC7 software-engineering subcommittee to integrate usability into software engineering and software-quality standards. This has required some compromises: for example, reconciling different definitions of usability by adopting the new term quality in use to represent the ergonomic concept of usability (Bevan, 1999). It is unfortunate that at a time of increasing expectations of easy access to information via the Internet, international standards are expensive and difficult to obtain. This is an inevitable consequence of the way standards bodies are financed. Information on how to obtain standards can be found in Table 4
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Software Subcommittee"

1

Tomimatsu, Shigeyuki, and Chisachi Kato. "Consideration of CFD Analysis Accuracy of Box Fan." In ASME-JSME-KSME 2019 8th Joint Fluids Engineering Conference. American Society of Mechanical Engineers, 2019. http://dx.doi.org/10.1115/ajkfluids2019-4795.

Full text
Abstract:
Abstract This CFD benchmark activity for a box fan has been conducted through the Industrial Committee for Supercomputing Promotion (ICSCP) and the Fan Noise Prediction Working Group from the “Promotion of Practical Use of HPC in Turbomachinery” Subcommittee established in the Turbomachinery Society of Japan. In this benchmark activity, various CFD software has been used. In this study, ANSYS CFX 18.2 is used and the difference in results are investigated by changing the turbulence model and the mesh model. The results between the k-epsilon model and the Shear Stress Transport (SST) model show a reverse trend. That is to say, the k-epsilon model overestimates the pressure difference at the high flow range and the SST model underestimates it at the low flow range compared with the experimental result. In order to improve these numerical results, CFD analysis is conducted by changing mesh models. The number of the blade surface mesh, and the initial height, height ratio, and number of prism layers are changed, but there is no improvement through these approaches. In this paper, CFD verification and validation are conducted for the box fan.
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Software Subcommittee' for particular source types:
Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography