Log in

Relevant bibliographies by topics / Solar battery charger / Dissertations / Theses

To see the other types of publications on this topic, follow the link: Solar battery charger.

Dissertations / Theses on the topic 'Solar battery charger'

Author: Grafiati

Published: 3 June 2025

Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 20 dissertations / theses for your research on the topic 'Solar battery charger.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse dissertations / theses on a wide variety of disciplines and organise your bibliography correctly.

1

Mukka, Manoj Kumar. "Simulink® Based Design and Implementation of a Solar Power Based Mobile Charger." Thesis, University of North Texas, 2016. https://digital.library.unt.edu/ark:/67531/metadc849640/.

Full text

Abstract:

Electrical energy is used at approximately the rate of 15 Terawatts world-wide. Generating this much energy has become a primary concern for all nations. There are many ways of generating energy among which the most commonly used are non-renewable and will extinct much sooner than expected. Very active research is going on both to increase the use of renewable energy sources and to use the available energy with more efficiency. Among these sources, solar energy is being considered as the most abundant and has received high attention. The mobile phone has become one of the basic needs of modern

APA, Harvard, Vancouver, ISO, and other styles

2

Kašpárek, Martin. "Regulátor pro nabíjení NiMH akumulátorů z fotovoltaického panelu." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2011. http://www.nusl.cz/ntk/nusl-218892.

Full text

Abstract:

The aim of this master's thesis is suggest and construct regulator for charge NiMH storage battery from photovoltaic (PV) panel. Function regulator is tracking maximum power point from PV panel (MPPT), control charge and evaluation full charge of battery.

APA, Harvard, Vancouver, ISO, and other styles

3

ElSherif, Khaled. "Solar Powered Smart Street Post." Thesis, Högskolan Dalarna, Energiteknik, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:du-28184.

Full text

Abstract:

This thesis work aimed to develop solar Photovoltaic (PV) powered smart street post. The post was set to serve on highways for wild animals’ detection and warn vehicles of possible crossings. The main aim was to design reliable standalone PV system via PVSyst software and experimenting four different PV technologies including a bifacial module under. Another aim was to select and develop the hardware and software terms of the smart street pot. Radar sensor and analog to digital (A/D) data acquisition (DAQ) card were set to be used for the motion detection. RF wireless communication module was

APA, Harvard, Vancouver, ISO, and other styles

4

LAMBERTI, ANDREA. "Metal-oxide nanostructures for energy applications." Doctoral thesis, Politecnico di Torino, 2013. http://hdl.handle.net/11583/2506221.

Full text

Abstract:

One of the most important challenges for our society is providing powerful devices for energy conversion and storage. The number of proposed technologies in today’s green and renewable energy science is large and still increasing: among all the dye-sensitized solar cells (for energy generation) and Li-ions batteries (for energy storage) have attracted a lot of interest thanks to the easy fabrication processes and the cheap materials involved. Great attention has been paid on the investigation of one-dimensional metal-oxide nanostructures for a new generation of power sources, because of their

APA, Harvard, Vancouver, ISO, and other styles

5

Leitman, Valentín. "Koncept nabíjecí stanice s možností off-grid provozu pro elektrokola." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2017. http://www.nusl.cz/ntk/nusl-319544.

Full text

Abstract:

This thesis deals with charging stations for electric bicycles powered by renewable energy. The aim of this work is to make a proposal for the hybrid charging stations for electric bicycles, which will work independently and, if necessary, will be backed up by a network. In this thesis is entered theoretical information on the issue of electric bicycles, the batteries, charging stations, the connectors of chargers, and photovoltaic systems. The practical part of this thesis is the basic design of the charging station and its design of the mathematical model of the individual parts in Simulink

APA, Harvard, Vancouver, ISO, and other styles

6

Huang, Cheng Ching, and 黃成靖. "CMOS Battery Charger for Solar Energy Harvesting." Thesis, 2014. http://ndltd.ncl.edu.tw/handle/60724763016389312536.

Full text

Abstract:

碩士<br>長庚大學<br>電子工程學系<br>102<br>This research integrates a ring oscillator, a buffer, a boost converter circuit and a battery charger circuit for use solar energy to charge Li-ion battery. The battery charger is designed to convert solar energy to electricity and then store it in the battery. Because the output voltage of the solar cell is lower than normal voltage source, it uses the boost converter to boost voltage into higher level. Next, a battery charger circuit which uses the output voltage of the boost converter protects the Li-ion rechargeable battery. So we achieve the target which use

APA, Harvard, Vancouver, ISO, and other styles

7

Yang, Ruey-Haur, and 楊瑞豪. "Application of the Solar Energy Handset Battery Charger." Thesis, 2007. http://ndltd.ncl.edu.tw/handle/44868038946626068384.

Full text

Abstract:

碩士<br>國立高雄第一科技大學<br>機械與自動化工程所<br>95<br>Most cell phone chargers in Taiwan are inserting chargers. However, the voltage, frequency, and socket are different in foreign countries. They have many accessories, and this makes them inconvenient to use. Nevertheless, solar power is a free-charge and easy accessible energy. Therefore, the thesis of this research is to design a cell phone charger that uses solar power to function. The content of this research can be categorized into four divisions: introduction to solar cell, various forms of charging and their applications, introducing the boost-up ci

APA, Harvard, Vancouver, ISO, and other styles

8

Pan, Tzu-Tang, and 潘子塘. "Soft-Switching DC/DC Converter Used in Solar-Energy Battery Charger." Thesis, 2000. http://ndltd.ncl.edu.tw/handle/06208674714581600590.

Full text

Abstract:

碩士<br>國立臺北科技大學<br>電機與能源研究所<br>88<br>The use of renewable energy, such as biomass, wind power, solar energy is getting more and more attentions due to the depletion of fossil fuels and the accumulation of green house gases. Among them, solar energy is the most attractive one because of being ubiquitous and abundant. However, cost and low conversion efficiency of solar cells have stymied its growth of use. One way to harness solar energy more efficiently is to store it when it is plenty and use it when needed. By this, we can better coordinate the time difference in demand and supply. Storing so

APA, Harvard, Vancouver, ISO, and other styles

9

Ke, Jyunyan, and 柯鈞嚴. "Design And Implementation of Intelligent Composite Battery Charger for Solar Energy Lighting." Thesis, 2012. http://ndltd.ncl.edu.tw/handle/19520333434152150811.

Full text

Abstract:

碩士<br>南開科技大學<br>電機與資訊工程研究所<br>100<br>The lead-acid batteries were used in most of the traditional storage batteries for outdoor solar lighting systems due to the cost considerations. Therefore there were many disadvantages, such as poor charging efficiency, easy to age for the battery, shorter life cycle, lower temperature resistance and heavy weight. The thesis proposes an intelligent composite battery charging controller combining the advantages of lead-acid battery and lithium-ion battery for solar lighting systems to improve the shortcomings of the existing lead-acid battery. When the sunl

APA, Harvard, Vancouver, ISO, and other styles

10

Li, Yen-Chen, and 李彥臻. "A DC-DC Converter for Li-ion Battery Charger with a Solar Panel." Thesis, 2015. http://ndltd.ncl.edu.tw/handle/23026559475718475175.

Full text

Abstract:

碩士<br>國立清華大學<br>電子工程研究所<br>103<br>Since the economic activities are going globalization, the developments of the personal electronic products are gradually toward portable, lightweight and powerful. However, all kinds of energy resources from the Earth are limited. Because the economic activities increased rapidly, the global warming and environmental pollution have been getting more serious. For this reason, people start promoting the Green-Energy consciousness in which the renewable energy source is a very important topic. An important character of the renewable energy source, either solar p

APA, Harvard, Vancouver, ISO, and other styles

11

林易宏. "Studies of the solar-cell-driven battery charger by a switchable series-parallel connection." Thesis, 2009. http://ndltd.ncl.edu.tw/handle/82192935625130569420.

Full text

Abstract:

碩士<br>明新科技大學<br>電子工程研究所<br>97<br>In this thesis, we study how to switch the series-parallel combination to get larger electrical energy deposited in the battery in a real environment with changing temperature and solar illumination. We design a solar cell-driven battery charger whose solar-cell units can be switched between two series-parallel connections. The experimental results show that when the temperature becomes higher, the correspoing illumination intensity of the switching point will also increase. used a simple model to analyze the result and found a relationship between switching il

APA, Harvard, Vancouver, ISO, and other styles

12

Po-Jen, Cheng, and 鄭博仁. "Design and Implementation of Intelligent Composite Battery Charger for Clean Solar Energy and Fuel Cells." Thesis, 2014. http://ndltd.ncl.edu.tw/handle/04173568968303751256.

Full text

Abstract:

碩士<br>南開科技大學<br>電子工程研究所<br>102<br>This thesis proposed the design and implement of intelligent charging controller with combing PV modules and fuel cells. According to the operating characteristics of the clean energy, PV modules, fuel cell, compound battery, lead-acid, and lithium-iron battery are integrated. PV modules are used as the primary source of power, however fuel cell is used to assist the reserve system for PV modules steady-state power and short-term supply transient power. The buck converter is employed to avoid over charging for battery and improve the over all efficiency. When

APA, Harvard, Vancouver, ISO, and other styles

13

Hung-Kun, Chen, and 陳宏昆. "Design and Implementation of High-Efficiency Battery Charger with Series-Loaded Resonant Converter for Solar Energy Applications." Thesis, 2007. http://ndltd.ncl.edu.tw/handle/31983322181628115041.

Full text

Abstract:

碩士<br>崑山科技大學<br>電機工程研究所<br>95<br>Fossil fuel is not sustainable. The use of fossil energy will increase the emissions of carbon dioxide (CO2), produce greenhouse effect indirectly, and also release huge waste heat, and hence will aggravate the global warming and climate change. Therefore, we urge the government to promote energy conservation, enhance energy efficiency, and develop renewable energies (solar, wind, micro-hydraulic, biomass, geothermal, hydrogen, and ocean). Taiwan is located in the subtropical zone, with lots of sunlight and long sunny days. Solar energy should be the most promi

APA, Harvard, Vancouver, ISO, and other styles

14

Delvadia, Soham Dineshbhai. "Improved Stand – Alone Solar Battery Charger with MPPT and TSC Algorithms for Quick Charging with Excess Power Extrication." Thesis, 2018. http://ethesis.nitrkl.ac.in/9742/1/2018_MT_216EE3283_SDDelvadia_Improved.pdf.

Full text

Abstract:

As energy demand is increasing with ongoing development and population, the conventional energy resources are becoming curtailing and are eventually harmful to an environment. In recent times many forms of renewable and clean energy sources are being considered for development; out of which solar is easily harvestable and available on most of the part of the globe. Solar energy is accessible for the duration of the day albeit its irradiance shifts through day and with changing climatic conditions. As the efficiency of solar based PV panel is low it is obligatory to extract the maximum pow

APA, Harvard, Vancouver, ISO, and other styles

15

Salve, Rima. "PV Based Converter with Integrated Battery Charger for DC Micro-Grid Applications." Thesis, 2014. http://hdl.handle.net/1805/6108.

Full text

Abstract:

Indiana University-Purdue University Indianapolis (IUPUI)<br>This thesis presents a converter topology for photovoltaic panels. This topology minimizes the number of switching devices used, thereby reducing power losses that arise from high frequency switching operations. The control strategy is implemented using a simple micro-controller that implements the proportional plus integral control. All the control loops are closed feedback loops hence minimizing error instantaneously and adjusting efficiently to system variations. The energy management between three components, namely, the photovol

APA, Harvard, Vancouver, ISO, and other styles

16

KRČKA, Pavel. "Fotovoltaické dobíjecí regulátory v ostrovních systémech." Master's thesis, 2013. http://www.nusl.cz/ntk/nusl-156255.

Full text

Abstract:

This diploma thesis deals with photovoltaic rechargable regulators used in isolated, or off-grid photovoltaic systems. First, basic types of off-grid installations, including their functions and applications in practice are described. Then, possibilities of electric energy accumulation in photovoltaic systems are mentioned, considering actual, accesible technologies. Matters of electric energy accumulation in leaden accumulators are examined in detail. Main part of the diploma thesis is about electronic designs of photovoltaic, also called solar, rechargable regulators. These are the main conn

APA, Harvard, Vancouver, ISO, and other styles

17

Dong, Xin-Hong, and 董信宏. "Estimation of Battery Charge State in Solar PV System." Thesis, 2016. http://ndltd.ncl.edu.tw/handle/03286364109455567014.

Full text

Abstract:

碩士<br>國立臺灣大學<br>機械工程學研究所<br>104<br>This thesis aims to investigate how to improve the estimation of the battery performance of Independent Solar PV System. The first part of this thesis is to predict SOC (State Of Charge) of the brand-new battery in Independent Solar PV System. The second part of this research focus on SOC determination of fading batteries. SOC determination came with error due to the battery capacity loss. Hence, diagnosis of the battery degradation is necessary. If we can estimate SOH (State Of Health) accurately so that the result of SOH prediction could make SOC determinat

APA, Harvard, Vancouver, ISO, and other styles

18

Yu, Chien-Chih, and 尤建智. "Application of Parallel-Load Resonant Converter in Solar Energy Battery Chargers." Thesis, 2008. http://ndltd.ncl.edu.tw/handle/rwj9n2.

Full text

Abstract:

碩士<br>崑山科技大學<br>電機工程研究所<br>96<br>Even though the fossil fuel promotes economic prosperity. However, the petrochemical energy is substantially decreased due to considerable usage. Therefore, solar energy, one of green energies, is become a future important alternate energy. This thesis adopts a parallel-loaded resonant converter with soft-switching technology as the battery charger. To avoid the burn-through of battery charger due to the variation of output voltage, a closed-loop boost converter between the solar array and the battery charger is then designed to stabilize the output voltage acr

APA, Harvard, Vancouver, ISO, and other styles

19

Hsieh, Ying-Hsin, and 謝英信. "Solar Car Energy Management and Study of Charge/Recharge Characteristics for Li-ion Polymer Battery." Thesis, 2008. http://ndltd.ncl.edu.tw/handle/07682287437645713532.

Full text

Abstract:

碩士<br>南台科技大學<br>機械工程系<br>96<br>Southern Taiwan University (S.T.U.T) has been developing the application of solar energy for many years , and also devoted to solar car manufacturing. PHOENIX II solar car was finished after one year hard work, it participated 2007 World Solar Challenge and eventually won the fifth position in challenge class. PHOENIX II was purpose-made for solar car racing, therefore, this study focused on investigating its lithium battery performance and installed energy management system. Concerning about the battery, characteristics of different charging/discharging conditio

APA, Harvard, Vancouver, ISO, and other styles

20

Okpako, O., P. I. Adamu, Haile S. Rajamani, and Prashant Pillai. "Optimization of community based virtual power plant with embedded storage and renewable generation." 2016. http://hdl.handle.net/10454/11125.

Full text

Abstract:

No<br>The current global challenge of climate change has made renewable energy usage very important. There is an ongoing drive for the deployment of renewable energy resource at the domestic level through feed-in tariff, etc. However the intermittent nature of renewable energy has made storage a key priority. In this work, a community having a solar farm with energy storage embedded in the house of the energy consumers is considered. Consumers within the community are aggregated in to a local virtual power plant. Genetic algorithm was used to develop an optimized energy transaction for the vir

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!