Relevant bibliographies by topics / Solenoid Valve

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Solenoid Valve'

Author: Grafiati
Published: 4 June 2021
Last updated: 9 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Solenoid Valve.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Solenoid Valve"

1

Elmer, K. F., and C. R. Gentle. "A parsimonious model for the proportional control valve." Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 215, no. 11 (November 1, 2001): 1357–63. http://dx.doi.org/10.1243/0954406011524739.

Full text
Abstract:
A generic non-linear dynamic model of a direct-acting electrohydraulic proportional solenoid valve is presented. The valve consists of two subsystems—a spool assembly and one or two unidirectional proportional solenoids. These two subsystems are modelled separately. The solenoid is modelled as a non-linear resistor-inductor combination, with inductance parameters that change with current. An innovative modelling method has been used to represent these components. The spool assembly is modelled as a mass-spring-damper system. The inertia and the damping effects of the solenoid armature are incorporated in the spool model. The model accurately and reliably predicts both the dynamic and steady state responses of the valve to voltage inputs. Simulated results are presented, which agree well with experimental results.
APA, Harvard, Vancouver, ISO, and other styles
2

Alburger, D. E. "Solenoid pinch valve." Review of Scientific Instruments 66, no. 5 (May 1995): 3388. http://dx.doi.org/10.1063/1.1145513.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Kajima, T., and Y. Kawamura. "Development of a high-speed solenoid valve: investigation of solenoids." IEEE Transactions on Industrial Electronics 42, no. 1 (1995): 1–8. http://dx.doi.org/10.1109/41.345838.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Ito, Michiro. "“ADEX VALVE” NEW PILOT OPERATED SOLENOID VALVE." Proceedings of the JFPS International Symposium on Fluid Power 1996, no. 3 (1996): 645–46. http://dx.doi.org/10.5739/isfp.1996.645.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Wright, Scott A., and J. Douglas McDonald. "Corrosion‐resistant pulsed solenoid valve." Review of Scientific Instruments 65, no. 1 (January 1994): 265–66. http://dx.doi.org/10.1063/1.1144796.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Ye, N., S. Scavarda, M. Betemps, and A. Jutard. "Models of a Pneumatic PWM Solenoid Valve for Engineering Applications." Journal of Dynamic Systems, Measurement, and Control 114, no. 4 (December 1, 1992): 680–88. http://dx.doi.org/10.1115/1.2897741.

Full text
Abstract:
PWM (Pulse width modulated) solenoid valves possess the advantages of low cost, high flow rate gain, and simple structure. However, the use of a PWM solenoid valve causes both discontinuity and nonlinearity of the flow rate; this results in difficulties of modeling and of control. This paper presents our work on modelling a pneumatic PWM solenoid valve for engineering applications. Two models are presented: one is the instantaneous mass flow rate model which can be used in the simulation to study the dynamic behavior of pneumatic PWM control systems; another model is the equivalent mass flow rate model which is developed for facilitating the synthesis of pneumatic PWM servomechanisms. An equation for determining the maximum operating modulation ratio of the PWM solenoid valve is also presented. Simulated results using the established models are compared with the experimental results for both the static characteristics of a PWM solenoid valve and the dynamic behavior of a system composed of a PWM solenoid valve and a constant volume chamber.
APA, Harvard, Vancouver, ISO, and other styles
7

Liu, Yan Fang, Ming Chong Mao, Xiang Yang Xu, and Gang Shi. "Multi-Physics Coupled Thermo-Mechanics Analysis of a Hydraulic Solenoid Valve." Applied Mechanics and Materials 321-324 (June 2013): 102–7. http://dx.doi.org/10.4028/www.scientific.net/amm.321-324.102.

Full text
Abstract:
Solenoid valve is complex heterogeneous system involving multi-physics coupling of mechanics, electronics, magnetics, thermotics, etc, whose reliability and life depends largely on the heat generated during the operation. A multi-physics coupled thermo-mechanics model of a hydraulic proportional solenoid valve used in an automatic transmission was built up with the finite element method (FEM), the temperature and thermal deformation of the solenoid valve with different currents under two operating environments was analyzed. The calculated results show that the operating environment and current are important factors leading to thermal failure of solenoid valves. The model has high accuracy because of considering the multi-physics coupling control characteristics of mechanics, electronics, magnetics, thermotics, etc, and so can be used for the reliability design of solenoid valves.
APA, Harvard, Vancouver, ISO, and other styles
8

Kajima, Takashi, and Yoshihisa Kawamura. "Development of a High-Speed Solenoid Valve. Investigation of the Solenoids." IEEJ Transactions on Industry Applications 114, no. 7/8 (1994): 769–77. http://dx.doi.org/10.1541/ieejias.114.769.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Mao, Kai Ge, Xiao Hang Xiong, and Shao Feng Yan. "The Design of Pneumatic Control System for CHT Hydrolysis Device." Advanced Materials Research 538-541 (June 2012): 1365–68. http://dx.doi.org/10.4028/www.scientific.net/amr.538-541.1365.

Full text
Abstract:
The working medium of the pneumatic control system is air, which is delivered to each branch pipe through the role of the governing valve , and then the divided gas delivers the compressed air to each solenoid valve and pneumatic control valve. The solenoid valves and pneumatic control valve is connected through terminals and PLC, PLC obtains corresponding signal and makes judgment, conveying signal which is delivered to the solenoid valves and pneumatic control valve to achieve ventilation and breathe action, and finally the gas reaches the cylinder . The cylinder can complete the valve body on and off, so as to realize the pneumatic system of the automatic control.
APA, Harvard, Vancouver, ISO, and other styles
10

Lee, DongBin, Peiman Naseradinmousavi, and C. Nataraj. "Nonlinear Dynamic Model-Based Adaptive Control of a Solenoid-Valve System." Journal of Control Science and Engineering 2012 (2012): 1–13. http://dx.doi.org/10.1155/2012/846458.

Full text
Abstract:
In this paper, a nonlinear model-based adaptive control approach is proposed for a solenoid-valve system. The challenge is that solenoids and butterfly valves have uncertainties in multiple parameters in the nonlinear model; various kinds of physical appearance such as size and stroke, dynamic parameters including inertia, damping, and torque coefficients, and operational parameters especially, pipe diameters and flow velocities. These uncertainties are making the system not only difficult to adjust to the environment, but also further complicated to develop the appropriate control approach for meeting the system objectives. The main contribution of this research is the application of adaptive control theory and Lyapunov-type stability approach to design a controller for a dynamic model of the solenoid-valve system in the presence of those uncertainties. The control objectives such as set-point regulation, parameter compensation, and stability are supposed to be simultaneously accomplished. The error signals are first formulated based on the nonlinear dynamic models and then the control input is developed using the Lyapunov stability-type analysis to obtain the error bounded while overcoming the uncertainties. The parameter groups are updated by adaptation laws using a projection algorithm. Numerical simulation results are shown to demonstrate good performance of the proposed nonlinear model-based adaptive approach and to compare the performance of the same solenoid-valve system with a non-adaptive method as well.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Solenoid Valve"

1

Angadi, Santosh Vishwanath Jackson Robert Lloyd. "Hydraulic solenoid valve reliability and modeling study." Auburn, Ala, 2008. http://hdl.handle.net/10415/1491.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Gamble, Jonathan B. "Sliding mode control of a proportional solenoid valve." Thesis, University of Bath, 1992. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.304385.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Gadyuchko, Andrey, and Sören Rosenbaum. "Nondestructive quality inspection of solenoid valves." Saechsische Landesbibliothek- Staats- und Universitaetsbibliothek Dresden, 2016. http://nbn-resolving.de/urn:nbn:de:bsz:14-qucosa-200756.

Full text
Abstract:
The presented innovative magnetic testing method utilises the fact, that each commercially available electromagnet can not only be used as an actuator, but also comprises internal sensor functions. This allows a huge application variety in the fields of non-destructive testing and condition monitoring of electromagnetic systems during production and within the application in the field.
APA, Harvard, Vancouver, ISO, and other styles
4

Gällsjö, Anders, and Mattias Johansson. "Physical Modelling and Automatic Configuration of CES Valve." Thesis, Linköpings universitet, Fluida och mekatroniska system, 2012. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-79261.

Full text
Abstract:
This thesis has been performed at Öhlins Racing AB which is known world-wide for its high quality racing shock absorbers. Öhlins have been developing shock absorbers for more than 30 years and in addition to this they also develop a technology for semi-active suspension. Semi-active suspension technology makes it possible to achieve an intelligent and dynamic vehicle chassis control. Compared to standard passive suspensions, semiactive dampers allow improving vehicle cornering performance while still providing good comfort when cruising. This is achieved by a real time adjustment of the suspensions damping characteristics. Öhlins system for semi-active suspension is called CES (Continuously controlled Electronic Suspension). The systems consist of electronically controlled hydraulic valves for uniflow dampers. These valves are mounted on all four dampers of the vehicle and are controlled individually to provide the desired ride quality. The valves are configurable to suit many types of vehicles by changing internal parts. The first goal of this thesis project was to study the behaviour of the CES valve and uniflow damper. In order to achieve this a simulation model was created using Hopsan which is a 1-dimensional multi-domain modelling tool developed at the division of Fluid and Mechatronic Systems at Linköping University. The model considers mechanical forces from for example springs together with hydraulic forces. It was validated against static and dynamic measurements made in a flow bench and a dynamometer. The second goal was to use the simulation model as part of a tool that configures the CES valve according to a requirements specification. To achieve this goal a method of estimating the characteristics of the internal damper valves was developed. This estimation method, together with the simulation model, was used to choose the best valve configuration by using weighted least-squares. The result is presented in a Matlab-based graphical user interface.
APA, Harvard, Vancouver, ISO, and other styles
5

Keprt, Jaroslav. "Bezsensorové polohové řízení solenoidu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2016. http://www.nusl.cz/ntk/nusl-241834.

Full text
Abstract:
This thesis deals with the determination of the position of the solenoid core in real time based on the measured current. The reference position of the current is used for feedback control of the solenoid. For this issue, software tool Matlab/Simulink was used. For current and temperature measurements, PCB circuits were created. The whole project was carried out on the dSPACE platform.
APA, Harvard, Vancouver, ISO, and other styles
6

Happel, Julius, René Schnetzler, and Markus Laufenberg. "Multistable valve technology with magnetic shape memory alloy as passive element activated by a bidirectional solenoid actuator." Technische Universität Dresden, 2020. https://tud.qucosa.de/id/qucosa%3A71264.

Full text
Abstract:
Magnetic Shape Memory (MSM) alloys show a superelastic behaviour with possible deformation rates up to 6% until 12% and a sufficient lifetime performance [1, 2]. In this paper, a passive application for a superelastic Ni-Mn-Ga-alloy is presented by using the MSM element as an accurately defined inner friction in a system of a multistable actuator, in particular a multistable proportional valve. The multistable valve is characterized by a currentless holding of the valve displacement in any position of the stroke. This circumstance makes the concept a very low energy consumption valve, compared to conventional proportional valves with solenoid actuators. The new aspect of a rigid connection of MSM Materials enables an absorption of tension as well as compressive forces. To realize an applicable controlling valve, a simple and effective controlling strategy has been implemented. Due to the stabilizing effect of the MSM element, an accurate controlling of the valve stroke and the usage for example as a pressure-, mass-flow or temperature-controlling valve was made possible. Furthermore, some potential applications in pneumatics as well as in hydraulics are presented.
APA, Harvard, Vancouver, ISO, and other styles
7

Håkansson, Klas, and Mikael Johansson. "Modeling and Control of an Electro-Pneumatic Actuator System Using On/Off Valves." Thesis, Linköping University, Department of Electrical Engineering, 2007. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-8754.

Full text
Abstract:

To control the exhaust gas recirculation (EGR) and the exhaust brake, the position of a butterfly valve connected to a piston inside a pneumatic cylinder is controlled by altering the pressure inside the cylinder. This thesis evaluates the possibility to do this with pulse width modulation (PWM) controlled On/Off valves. The whole electro-pneumatic actuator system is built out of two On/Off valves and a cylinder.

A mathematical model of the system is constructed. The complete system model on state space form consists of nine states and is nonlinear. The model captures the dynamics of the system. The statics of the system is not captured as accurately. The model is still good enough to be used as aid when developing control strategies, since position feedback is available.

Automatic control strategies for the system are first developed and tested in simulation. The first approach is PID control. Because of the nonlinear properties of the system the results from a PID with a constant proportional part is unsatisfactory. To cope with the nonlinearities, a fuzzy controller is constructed; the results prove somewhat better, but not as good as expected due to implementation difficulties.

In a test bench the system is controlled by a P controller with feedforward from position. The feedforward strongly reduces the nonlinear behavior of the system. With this implementation the results that were hoped for with the fuzzy controller are reached.

APA, Harvard, Vancouver, ISO, and other styles
8

Žižlavský, Vít. "Návrh konstrukce rychlého elektromagnetického ventilu semiaktivního tlumiče." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2021. http://www.nusl.cz/ntk/nusl-444296.

Full text
Abstract:
This diploma thesis’s focuses on the mechanical design of fast solenoid throttle valve for DCC semiactive damper. Current DCC dampers work with a time response of over 10 ms, which is not suitable for fast semiactive control of vehicle chassis. The time response needs to be shortened, to improve quality of regulation. The required time response is archived by new fast electromagnetic actuator for original CES valve. The actuator has been accelerated by reducing induction of eddy currents and by reducing weight of moving parts. New valve helped to reduce the time response of damper by 28 % to 8,1 ms. The results proved, that the time response is affected more by speed of the servo effect, which is closing main orifice, than by electromagnetic actuator. There is no more potential in accelerating CES valve by actuator.
APA, Harvard, Vancouver, ISO, and other styles
9

Sharma, Akhil. "A New Multiple Input Random Excitation Technique Utilizing Pneumatic Cylinders." University of Cincinnati / OhioLINK, 2016. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1470671978.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Ellwein, Christian. "Vibration based fault detection for Solenoid valves." Thesis, Northumbria University, 2002. http://nrl.northumbria.ac.uk/236/.

Full text
Abstract:
Solenoid valves play a vital role in many machines and systems. If one of these devices breaks down the whole system can be affected. Because of this importance of valves, it is desirable to observe these parts to detect faults, both when they are occurring and before they can cause serious damage. Among several possible methods of observation (monitoring actuation time, electrical current, fluidic parameters and others) the observation of mechanical vibrations is a well known method of observing mechanical systems which is commonly used for observation of rotating machinery, but which includes several challenges for diagnosis of solenoid valves. This thesis investigates the possibilities and advantages of vibration analysis of fault detection for solenoid valves. New algorithms are developed to automatically segment the overall non- stationary raw data to smaller sections with a higher degree of stationarity. These new segments are interpretable in a mechanical sense and they separate different sources of vibration. Furthermore a new method to detect regions of interest in a spectrum for classification without "a priori knowledge" about the process has been developed. The experiments presented in this thesis give the evidence that these new methods of pre¬processing and feature extraction enable reliable classification results for transient signals as they occur in the vibration of a switching valve.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Solenoid Valve"

1

Bacanskas, V. P. Aging and qualification research on solenoid operated valves. Washington, DC: Division of Engineering, Office of Nuclear Regulatory Research, U.S. Nuclear Regulatory Commission, 1988.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

American Society of Heating, Refrigerating and Air-Conditioning Engineers. Methods of testing capacity of refrigerant solenoid valves. Atlanta, GA: American Society of Heating, Refrigerating, and Air-Conditioning Engineers, 2004.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Association of Hydraulic Equipment Manufacturers. Prevention of accidental interchangeability of proportional and non-proportional solenoid valves. London: Association of Hydraulic Equipment Manufacturers, 1985.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Meininger, Richard D. Development of a testing and analysis methodology to determine the functional condition of solenoid operated valves. Washington, DC: Divison of Engineering, Office of Nuclear Regulatory Research, U.S. Nuclear Regulatory Commission, 1987.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Foley, W. J. Closeout of IE bulletin 80-23: Failures of solenoid valves manufactured by Valcor Engineering Corporation. Washington, DC: Division of Operational Events Assessment, Office of Nuclear Reactor Regulation, U.S. Nuclear Regulatory Commission, 1989.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Ellwein, C. Vibration based fault detection for solenoid valves. 2002.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Anders, James E. Solenoid-actuated directional control valves for hydraulic service. Hydraulics Associates, 1997.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Methods of Testing Capacity of Refrigerant Solenoid Valves (Ashrae Standards). Amer Society of Heating, 2004.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Parker, Philip M. The 2007-2012 World Outlook for Solenoid-Operated Valves and Parts Excluding Nuclear and Fluid-Power-Transfer Valves. ICON Group International, Inc., 2006.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

The 2006-2011 World Outlook for Solenoid-Operated Valves and Parts Excluding Nuclear and Fluid-Power-Transfer Valves. Icon Group International, Inc., 2005.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Solenoid Valve"

1

Nefed’ev, A. I., G. I. Sharonov, and I. E. Ilyina. "Three-Position Solenoid Valve for Pneumatic Systems of Trucks." In Proceedings of the 4th International Conference on Industrial Engineering, 2115–22. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-95630-5_228.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Fuhao, Ye, Chen Huiyan, Tao Gang, and Liu Yuwei. "Bi-state Modulation for High Speed On/Off Solenoid Valve." In Lecture Notes in Electrical Engineering, 115–22. Berlin, Heidelberg: Springer Berlin Heidelberg, 2011. http://dx.doi.org/10.1007/978-3-642-25905-0_16.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Tkacz, Eliza, Zbigniew Kozanecki, and Jakub Łagodziński. "Solenoid Actuator for a Camless Control System of the Piston Engine Valve." In Advances in Intelligent Systems and Computing, 141–48. Cham: Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-10990-9_14.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Nukala, Venkata Sunil Sai, Subrata Chakrabarti, D. Venkittaraman, and M. Radhakrishnan. "Design and Development of Mass Optimised Latching Solenoid Valve for Chandrayaan-2 Lander Propulsion." In Lecture Notes in Mechanical Engineering, 41–48. Singapore: Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-1724-2_5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Demarchi, Arthur, Leonardo Farçoni, Adam Pinto, Rafael Lang, Roseli Romero, and Ivan Silva. "Modelling a Solenoid’s Valve Movement." In RoboCup 2017: Robot World Cup XXI, 290–301. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-030-00308-1_24.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Anusha, M. R., and M. G. Veena. "PWM Controlled Solenoid Valves for Automatic Gear Change in Four-Wheelers." In Lecture Notes in Electrical Engineering, 335–44. Singapore: Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-15-0626-0_28.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Braun, Tristan, and Johannes Reuter. "Sliding Mode Observation with Iterative Parameter Adaption for Fast-Switching Solenoid Valves." In Variable-Structure Approaches, 189–212. Cham: Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-31539-3_7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Patel, Jigar V., Kaustubh Gadgil, C. Sengupta, and P. Sumanth. "Performance Enhancement of Reactor Building Containment Isolation System by Use of Direct-Acting Solenoid Valves." In Reliability, Safety and Hazard Assessment for Risk-Based Technologies, 671–85. Singapore: Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-13-9008-1_57.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Benbatouche, A., B. Kadri, and N. Touati. "Remote Control of Several Solenoid Valves for Irrigation System, via GSM (SMS) and Web Page Controller." In Lecture Notes in Networks and Systems, 322–28. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-37207-1_33.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

"magnetic solenoid valve." In Dictionary Geotechnical Engineering/Wörterbuch GeoTechnik, 832. Berlin, Heidelberg: Springer Berlin Heidelberg, 2014. http://dx.doi.org/10.1007/978-3-642-41714-6_130168.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Solenoid Valve"

1

Lee, DongBin, C. Nataraj, and Peiman Naseradinmousavi. "Nonlinear Model-Based Adaptive Control of a Solenoid-Valve System." In ASME 2010 Dynamic Systems and Control Conference. ASMEDC, 2010. http://dx.doi.org/10.1115/dscc2010-4283.

Full text
Abstract:
In this paper, a model-based control algorithm is developed for a solenoid-valve system. Solenoids and butterfly valves have uncertainties in multiple parameters in the model, which make the system difficult to adjust to the environment. These are further complicated by combining the solenoid and butterfly dynamic models. The control objective of a solenoid-valve system is to position the angle of the butterfly valve through the electric-driven actuator in spite of the complexity presented by uncertainties. The novelty of the controller design is that the current source of the solenoid valve from the model of the electromagnetic force is substituted for the control input in order to reach the set-point of the butterfly disk based on the error signals, overcoming the uncertainties represented by lumped parameters groups, and a stable controller is designed via the Lyapunov-based approach for the stability of the system and obtaining the control objective. The parameter groups are updated by adaptation laws using a projection algorithm. Numerical simulation is shown to demonstrate good performance of the proposed approach.
APA, Harvard, Vancouver, ISO, and other styles
2

Kojima, Nobuo, Koji Nishino, Keisuke Sakemura, and Kengo Kobayashi. "The Solenoid Valve for Main Steam Relief Valve Adapted Under Severe Accident." In 2020 International Conference on Nuclear Engineering collocated with the ASME 2020 Power Conference. American Society of Mechanical Engineers, 2020. http://dx.doi.org/10.1115/icone2020-16030.

Full text
Abstract:
Abstract MSSRVs in Boiling Water Reactor (BWRs) can be mandatory opened through a solenoid valve, when a nuclear reactor raises unusual pressure. The solenoid valve consists of a valve main part which forms a flow channel, and a pilot part which controls a flow direction. In the accident of the Fukushima Daiichi nuclear power plant, MSSRVs ware over the design specification of these solenoid valves, and were not able to operate. One of the reason, there is degradation of a sealant and a coil of a solenoid valve. As one of the measures for rebooting the BWRs, the development and verification of a solenoid valve which were applied to the SA condition are required. Since we developed and verified it applied to the SA.condition, we report here.
APA, Harvard, Vancouver, ISO, and other styles
3

Liu, Z., X. Han, and Y. F. Liu. "Dynamic Simulation of Large Flow Solenoid Valve." In ASME 2016 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2016. http://dx.doi.org/10.1115/imece2016-66632.

Full text
Abstract:
A nonlinear dynamic model of a large flow solenoid is presented with the multi-physics dynamic simulation software called SimulationX. Validation is performed by comparing the experimental results with the simulated ones. The dynamic characteristics of the large flow solenoid valve are analyzed. Different structural parameters are modified in this research and the diameter of the orifice is proved to be one of the most important parameters which influences the pressure response most.
APA, Harvard, Vancouver, ISO, and other styles
4

Song, Xue-ling, Ying-bao Zhao, Chao-ying Liu, and Zhe-ying Song. "Solenoid Valve Switching Characteristic Test System Design." In 2009 Ninth International Conference on Hybrid Intelligent Systems. IEEE, 2009. http://dx.doi.org/10.1109/his.2009.291.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Lagodzinski, Jakub, and Eliza Tkacz. "Experimental verification of solenoid valve numerical model." In 2020 Mechatronics Systems and Materials (MSM). IEEE, 2020. http://dx.doi.org/10.1109/msm49833.2020.9202160.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Fischer, Werner, Walter Fuchs, Helmut Laufer, and Uwe Reuter. "Solenoid-Valve Controlled Diesel Distributor Injection Pump." In International Congress & Exposition. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 1993. http://dx.doi.org/10.4271/930327.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Wu, Yuanbo, Tao Huang, and Haojie Yu. "The OCV Solenoid Valve Simulation Test Platform." In 2018 2nd IEEE Advanced Information Management,Communicates, Electronic and Automation Control Conference (IMCEC). IEEE, 2018. http://dx.doi.org/10.1109/imcec.2018.8469342.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Lino, Paolo, Guido Maione, Fabrizio Saponaro, Jing Deng, and Kang Li. "Identification of solenoid valve dynamics in a variable valve timing system." In 2016 UKACC 11th International Conference on Control (CONTROL). IEEE, 2016. http://dx.doi.org/10.1109/control.2016.7737570.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Southern, Jacob D. "Nonlinear Time-Frequency Control of Electromagnetic Solenoid Valve." In ASME 2016 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2016. http://dx.doi.org/10.1115/imece2016-67383.

Full text
Abstract:
The main objective of this study is to prove that an electromagnetic solenoid valve can be controlled accurately and have a rapid response time while not having to linearize the system. An electromagnetic solenoid valve can neither be slow nor have large amounts of error due to the small distances between the pressure ports and the accuracy of the system they are used to control. The valve modeled for this study was an automotive transmission solenoid valve. The solenoid valve has three ports: supply, exhaust, and controlled pressure. For simplification, this model only considers moving the spool to a specific port location, which will be user specified. The controller used for this system was a nonlinear time-frequency controller that uses Daubechies-3 wavelets for signal transformation. Once, the controller was optimized it was able to control the system accurately and with a rapid response time. The system is able to reach the desired input and maintain zero error in two tenths of a second with out greatly over shooting the desired input. Overall, this system is physically possible to control the way the simulation predicts because all of the parameters used in the simulation are from a real solenoid valve.
APA, Harvard, Vancouver, ISO, and other styles
10

Reich, Alton. "System and Solenoid Valve Interaction Leading to Spurious Opening." In ASME 2018 Pressure Vessels and Piping Conference. American Society of Mechanical Engineers, 2018. http://dx.doi.org/10.1115/pvp2018-84118.

Full text
Abstract:
In a pressurized water reactor the high pressure system vent lines from the pressurizer and reactor are routed to a common header that can be emptied to the refueling water storage tank or a drain tank. During plant testing the valves are operated in the following sequence: the pressurizer isolation valve is opened to pressurize the common header, the pressurizer isolation valve is closed, then the drain tank isolation valve is opened. This sequence of valve operation verifies that the valves open and close properly — opening the pressurizer isolation valve allows steam to enter the common header and is verified by pressure indication via a pressure transducer, and opening the drain tank isolation valve decreases the pressure in the common header and verifies that the pressurizer isolation valve closed properly. During this sequence of valve actuation, the other solenoid valves in the system are subject to transient steam pressures. During one test sequence an isolation valve to the refueling water storage tank indicated that it was not closed for a period of several seconds. Since there is only one pressure transducer in the common header, a systemlevel analysis was performed to obtain a more detailed understanding of the transient pressures in the common header, and how that might affect solenoid valve performance.
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Solenoid Valve"

1

Volk, J., and H. Rostamian. A solenoid shut off valve specification for flammable gas systems. Office of Scientific and Technical Information (OSTI), January 1990. http://dx.doi.org/10.2172/5041950.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

MISKA, C. R. Worcester 1 Inch Solenoid Actuated Gas Operated VPS System Ball Valve. Office of Scientific and Technical Information (OSTI), November 2000. http://dx.doi.org/10.2172/805468.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

VAN KATWIJK, C. Worcester 1 Inch Solenoid Actuated Gas Operated VPS System Ball Valve. Office of Scientific and Technical Information (OSTI), June 2000. http://dx.doi.org/10.2172/803973.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

VAN KATWIJK, C. Worcester 1 inch solenoid-actuated gas-operated DI/HE system ball valve. Office of Scientific and Technical Information (OSTI), July 1999. http://dx.doi.org/10.2172/797533.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Tokuo, Kenichiro, Kenji Hiraku, and Hiroyuki Yamada. Integration of Magnetic Solenoid Valve Model Into High-Pressure Fuel Pump Simulator and Its Application. Warrendale, PA: SAE International, May 2005. http://dx.doi.org/10.4271/2005-08-0013.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

MISKA, C. R. Worcester Solenoid Actuated Gas Operated MCO Isolation Valves. Office of Scientific and Technical Information (OSTI), November 2000. http://dx.doi.org/10.2172/805465.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

MISKA, C. R. Worchester Solenoid Actuated Gas Operated MCO Isolation Valves. Office of Scientific and Technical Information (OSTI), November 2000. http://dx.doi.org/10.2172/805467.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

VAN KATWIJK, C. Worcester Solenoid Actuated Gas Operated MCO Isolation Valves. Office of Scientific and Technical Information (OSTI), June 2000. http://dx.doi.org/10.2172/803955.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

VAN KATWIJK, C. Worchester Solenoid Actuated Gas Operated MCO Isolation Valves. Office of Scientific and Technical Information (OSTI), June 2000. http://dx.doi.org/10.2172/803972.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

MISKA, C. R. Worcester Solenoid Actuated Gas Operated MCO Isolation Valves. Office of Scientific and Technical Information (OSTI), September 2000. http://dx.doi.org/10.2172/804839.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Solenoid Valve' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography